mirror of
https://git.yoctoproject.org/poky
synced 2026-05-09 17:39:31 +00:00
Michael Opdenacker
df98d305de
Using only "bitbake bmaptool-native", running "oe-run-native bmaptool-native bmaptool ..." fails as follows: Error: Have you run 'bitbake bmaptool-native -caddto_recipe_sysroot'? Running the "bitbake bmaptool-native -caddto_recipe_sysroot" target is actually sufficient. (From yocto-docs rev: 72fe904a3bbb5e2c7279ab1f119c2beca200dcf2) Signed-off-by: Michael Opdenacker <michael.opdenacker@rootcommit.com> Reviewed-by: Antonin Godard <antonin.godard@bootlin.com> Signed-off-by: Antonin Godard <antonin.godard@bootlin.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
60 lines
2.3 KiB
ReStructuredText
60 lines
2.3 KiB
ReStructuredText
.. SPDX-License-Identifier: CC-BY-SA-2.0-UK
|
|
|
|
Flashing Images Using `bmaptool`
|
|
********************************
|
|
|
|
A fast and easy way to flash an image to a bootable device is to use
|
|
`bmaptool`, which is integrated into the OpenEmbedded build system.
|
|
`bmaptool` is a generic tool that creates a file's block map (bmap) and
|
|
then uses that map to copy the file. As compared to traditional tools
|
|
such as `dd` or `cp`, `bmaptool` can copy (or flash) large files like raw
|
|
system image files much faster.
|
|
|
|
.. note::
|
|
|
|
- If you are using Ubuntu or Debian distributions, you can install
|
|
the ``bmap-tools`` package using the following command and then
|
|
use the tool without specifying ``PATH`` even from the root
|
|
account::
|
|
|
|
$ sudo apt install bmap-tools
|
|
|
|
- If you are unable to install the ``bmap-tools`` package, you will
|
|
need to build `bmaptool` before using it. Use the following command::
|
|
|
|
$ bitbake bmaptool-native -caddto_recipe_sysroot
|
|
|
|
Following, is an example that shows how to flash a Wic image. Realize
|
|
that while this example uses a Wic image, you can use `bmaptool` to flash
|
|
any type of image. Use these steps to flash an image using `bmaptool`:
|
|
|
|
#. *Update your local.conf File:* You need to have the following set
|
|
in your ``local.conf`` file before building your image::
|
|
|
|
IMAGE_FSTYPES += "wic wic.bmap"
|
|
|
|
#. *Get Your Image:* Either have your image ready (pre-built with the
|
|
:term:`IMAGE_FSTYPES`
|
|
setting previously mentioned) or take the step to build the image::
|
|
|
|
$ bitbake image
|
|
|
|
#. *Flash the Device:* Flash the device with the image by using `bmaptool`
|
|
depending on your particular setup. The following commands assume the
|
|
image resides in the :term:`Build Directory`'s ``deploy/images/`` area:
|
|
|
|
- If you have write access to the media, use this command form::
|
|
|
|
$ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
|
|
|
|
- If you do not have write access to the media, set your permissions
|
|
first and then use the same command form::
|
|
|
|
$ sudo chmod 666 /dev/sdX
|
|
$ oe-run-native bmaptool-native bmaptool copy build-directory/tmp/deploy/images/machine/image.wic /dev/sdX
|
|
|
|
For help on the ``bmaptool`` command, use the following command::
|
|
|
|
$ bmaptool --help
|
|
|