SCMI support was added to the latest kernel (kernel commit
96bb0954860a4c8b8c77d59fc53cd4cafac914f5). So, remove this patch, as it
is no longer necessary
Signed-off-by: Jon Mason <jon.mason@arm.com>
This kernel config variable has been removed from newer kernels (v5.19)
and is logging a warning of:
[INFO]: the following symbols were not found in the active configuration:
- CONFIG_OPTEE_SHM_NUM_PRIV_PAGES
Remove the entry, as it is no longer needed
Signed-off-by: Jon Mason <jon.mason@arm.com>
In newer kernels, vexpress has been rolled under the versatile umbrella.
Update the patch to refer to the new location
Signed-off-by: Jon Mason <jon.mason@arm.com>
Rebase the u-boot patches on top of current u-boot supported
version in poky, needed some adjustments at efi loader.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add documentation for how to use the OEQA framework to test targets in
meta-arm. Include instructions on using OEFVPTarget as well as the
OEFVPSerialTarget introduced by the recent refactor of runfvp.
Issue-Id: SCM-4954
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I146ec1c82214471fe9d18a999fd92efb38f652f9
Signed-off-by: Jon Mason <jon.mason@arm.com>
The runfvp refactor to enable OEFVPSerialTarget created FVP_CONSOLES
which maps the names used for serial ports in test cases to the names
used for serial ports in the FVP stdout.
Refactor the FVP_CONSOLE section -> FVP_CONSOLES, noting the the
'default' console is still used for the --console runfvp flag.
Issue-Id: SCM-4954
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: Ieb13d74cfd425900f44b4b2e6d125393e7b456ad
Signed-off-by: Jon Mason <jon.mason@arm.com>
The dropped u-boot patches are not required as the bug is
from the SMM Gateway SP. A patch for the secure partitions
has been added to fix the SMM Gateway behaviour. Patch
0048-Fix-UEFI-get_variable-with-small-buffer.patch has been
added in commit "arm-bsp/secure-partitions: fix SMM gateway
bug for EFI GetVariable()".
Signed-off-by: Gowtham Suresh Kumar <gowtham.sureshkumar@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The efiGetVariable() function when called from uboot with data size
set to 0 should return only the data size and not the actual data in
the end of the buffer based on the EFI 2.9 spec. This patch fixes
the bug.
Signed-off-by: Gowtham Suresh Kumar <gowtham.sureshkumar@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
At the moment, when using the --console flag, if telnet is shut down
cleanly (i.e. by typing "quit" at the prompt instead of Ctrl+C), runfvp
still waits on the FVP to exit of its own accord, so hangs.
Move the fvp.run() call so that when telnet quits, it immediately
proceeds to shut down the FVP.
Issue-Id: SCM-4954
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I2169c99586a1eebc2c6ab4b2e15fb0c769fc81a8
Signed-off-by: Jon Mason <jon.mason@arm.com>
Run command: bitbake optee-os && bitbake lib32-optee-os
bitbake lib32-optee-os will fail with following error since
bitbake optee-os already deploy same file under the path.
RROR: lib32-optee-os-3.12.0+gitAUTOINC+3d47a131bc-r0 do_deploy: The recipe lib32-optee-os is trying to install files into a shared area when those files already exist. Those files and their manifest location are:
/build/tmp-glibc/deploy/images/qemuarm64/optee/tee.elf
(matched in manifest-qemuarm64-optee-os.deploy)
Fix by deploy them to differernt dir
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Current secure-partitions patches do not apply cleanly with devtool.
Update them with the necessary changes to address this issue, and
regenerate them via devtool.
Signed-off-by: Jon Mason <jon.mason@arm.com>
- 0001-vexpress64-Add-BASER_FVP-vexpress-board-variant.patch
Change to 0002-vexpress64-add-MPU-memory-map-for-the-BASER_FVP.patch.
Only MPU memory map is preserved, other parts have been upstreamed.
- 0007-vexpress64-Configure-memory-using-device-tree.patch
Deleted. Upstreamed in commit 1a1143a45457161e90ea4cd5f3b0561d924ed8fe
Signed-off-by: Qi Feng <qi.feng@arm.com>
Issue-Id: SCM-5030
Change-Id: I4aab3bab545e64e3a4a3a3fd67bcef79acdc41be
Signed-off-by: Jon Mason <jon.mason@arm.com>
bundled libcrypto.a in optee-test sources is built using glibc based
toolchain and expects foritied _chk version of the libc functions e.g. __sprintf_chk
which wont work for musl. Therefore rely on freshly built openssl by OE
instead
Fixes errors like
arm-yoe-linux-musleabi/gcc/arm-yoe-linux-musleabi/12.1.0/ld: ../openssl/lib/arm/libcrypto.a(dso_dlfcn.o): in function `dlfcn_name_converter':
dso_dlfcn.c:(.text+0x19e): undefined reference to `__sprintf_chk'
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This change is to add yocot recipe to support optee-os
3.18.0 version.
Also, move the SRC_URI:append and DEPENDS to optee-os.inc
as these are common accross different optee versions.
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upgrade the FVPs to the latest releases, and do some cleanups for future
changes.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The linuxboot test case prints the following in log.do_testimage, only
when executing testimage without a pycache:
linuxboot.py:18: DeprecationWarning: invalid escape sequence \:
self.target.expect(self.console, "login\:", timeout=10*60)
Fix the warning by escaping the ':' character correctly in the pexpect
regex.
Issue-Id: SCM-4957
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I8ad54c7df6b7d1d1ddeab31cf66daff1ab84e227
Signed-off-by: Jon Mason <jon.mason@arm.com>
When enabling trusted boot, the UEFI binary was replaced with a FIP image (which
contains the UEFI binary), therefore the SD card image should depend on
trusted-firmware-a rather than edk2-firmware.
Signed-off-by: Adam Johnston <adam.johnston@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upstream has updated u-boot to v2022.07, but the update is causing
problems with some machines. Temporarily add a v2022.04 recipe until
the issues can be resolved.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Change to use sato by default. Unfortunately, there are some bugs found
by this change. For those systems, change it back to base until the
issues can be resolved.
Signed-off-by: Jon Mason <jon.mason@arm.com>
The common test has a timing issue, causing it to intermittently fail.
Since it is not unique to our environment, remove it to prevent false
positive regressions.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Latest oe-core has enabled the buildpaths QA check, which warns if the
build paths are present inside binaries. This is because build paths in
deployed binaries is both information leakage and non-reproducible.
Until this is fixed, skip this check.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Latest oe-core has enabled the buildpaths QA check, which warns if the
build paths are present inside binaries. This is because build paths in
deployed binaries is both information leakage and non-reproducible.
Until this is fixed, skip this check.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Latest oe-core has enabled the buildpaths QA check, which warns if the
build paths are present inside binaries. This is because build paths in
deployed binaries is both information leakage and non-reproducible.
Until this is fixed, skip this check.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Latest oe-core has enabled the buildpaths QA check, which warns if the
build paths are present inside binaries. This is because build paths in
deployed binaries is both information leakage and non-reproducible.
Until this is fixed, skip this check.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Backport two patches from upstream to ensure the build doesn't contain
build paths.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Latest oe-core has enabled the buildpaths QA check, which warns if the
build paths are present inside binaries. This is because build paths in
deployed binaries is both information leakage and non-reproducible.
Until this is fixed, skip this check.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Latest oe-core has enabled the buildpaths QA check, which warns if the
build paths are present inside binaries. This is because build paths in
deployed binaries is both information leakage and non-reproducible.
Until this is fixed in edk2-firmware, skip this check.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
If clang builds assembler code the debug symbols contain unmapped build
paths which trigger the buildpaths QA check. This bug has been filed
with upstream:
https://github.com/llvm/llvm-project/issues/56609
Until it is fixed, exclude buildpaths from clang builds so that CI can
pass.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
When used in a non-interactive context, apt prints a warning:
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
Use apt-get directly to avoid putting warnings in the logs.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
NT_FW_CONFIG DTB contains platform information passed by TF-A boot
stage. This information is used for Virtual memory map generation
during PEI phase and passed on to DXE phase as a HOB, where it is used
in ConfigurationManagerDxe.
Signed-off-by: Adam Johnston <adam.johnston@arm.com>
We have encountered intermittent hanging during FVP shutdown, so improve
the termination logic by first issuing a terminate(), waiting a bit
then, if necessary, issuing a kill().
Move returncode logic to after the telnet/pexpect cleanup so it
actually runs.
Move pexpect.EOF logic into FVPRunner.stop so that it executes before
closing the pexpect handle.
Issue-Id: SCM-4957
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: Iebb3c3c89367256b1e116e66ffdb6b742358bce4
Signed-off-by: Jon Mason <jon.mason@arm.com>
Create a new "linuxboot" test that uses the pexpect methods on
OEFVPSerialTarget to wait for a Linux login shell.
Switch to this test method for fvp-baser-aemv8r64, corstone500 and
corstone1000.
Issue-Id: SCM-4957
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: Idd749652ee72e244b7a3831dd2295e0bfaed3bfa
Signed-off-by: Jon Mason <jon.mason@arm.com>
Refactor OEFVPTarget into new base class, OEFVPSSHTarget. OEFVPTarget
extends OEFVPSSHTarget and additionally waits for a Linux login prompt
for compatibility with tests in OE-core.
OEFVPSerialTarget also extends OEFVPSSHTarget. It also exposes the
entire API of pexpect, with the first argument being the
FVP_TEST_CONSOLE varflag key. It logs each console output to separate
files inside the core-image-minimal work directory.
Issue-Id: SCM-4957
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I1b93f94471c6311da9ee71a48239640ee37de0af
Signed-off-by: Jon Mason <jon.mason@arm.com>
So that the test target can connect to the desired console(s) as soon
as they appear in the FVP stdout, add the variable FVP_CONSOLES to the
fvpconf as a replcaement for FVP_CONSOLE. The varflags of this variable
define a mapping between FVP console names (e.g. terminal_0) and console
names in the tests (e.g. 'zephyr'). The console defined in
FVP_CONSOLE is automatically mapped as 'default' for backwards
compatibility.
This also enables greater reuse of test cases, as the "default" console
name can be remapped on a per-machine basis.
Issue-Id: SCM-4957
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I9d88b172bfc5a5459b9f5132f287c70816d7fb55
Signed-off-by: Jon Mason <jon.mason@arm.com>
Refactor OEFVPTarget to use the FVPRunner in meta-arm/lib instead of
calling runfvp in a new process.
Use pexpect to wait for the login prompt instead of parsing the FVP
output manually.
This patch introduces a dependency on pexpect for the meta-arm test
targets. It is already in the Yocto host dependency list and the Kas
container image, but may need to be installed on development machines.
Issue-Id: SCM-4957
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I7200e958c5701d82493287d021936afcf2f2bac9
Signed-off-by: Jon Mason <jon.mason@arm.com>
Create basic tests for conffile and runner in meta-arm/lib/fvp
Issue-Id: SCM-4957
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I1684b0c99fb4fd5299df19f00abb30e8faab3495
Signed-off-by: Jon Mason <jon.mason@arm.com>
Refactor runfvp into a "fvp" library inside meta-arm. Split into
terminal, conffile and runner.
Issue-Id: SCM-4957
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I797f9a4eab810f3cc331b7db140f59c9911231fd
Signed-off-by: Jon Mason <jon.mason@arm.com>
When runfvp is spawned from an other process (for example except), it is
throwing a permission error.
To solve the problem, surround the call to setpgid with a try/except and
ignore the permission errors.
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This commit configures N1SDP firmware for TBBR bootflow as follows:
* uefi.bin replaced with with fip.bin
* load address adjusted for FIP image
Signed-off-by: Adam Johnston <adam.johnston@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This commit configures scp-firmware for TBBR bootflow as follows:
* Updates SCP FW to master
* BL31 replaced in the SCP firmware image with BL1
Signed-off-by: Adam Johnston <adam.johnston@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This commit configures trusted-firmware-a for TBBR bootflow on N1SDP as follows:
* Trusted boot is enabled.
* Generation of root-of-trust is enabled
* All TB images (BLx, DTBs) are built
* uefi.bin is specified as the BL33 image
* BL2, BL31, BL33 are signed and stored in the FIP
* N1SDP platform sources are patched to increase max size BL2 and reduce max size of BL1
Signed-off-by: Adam Johnston <adam.johnston@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add basic support for running edk2 on qemuarm and qemuarm64. This
necessitated the need to add ACPI and EFI to the default kernel configs
for these machines.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Jon Mason
Rui Miguel Silva
Peter Hoyes
Gowtham Suresh Kumar
Changqing Li
Qi Feng
Khem Raj
Vishnu Banavath
Ross Burton
Adam Johnston
Bertrand Marquis