Add an optional env argument to the run_fvp() function, and check that
DISPLAY is preserved.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The __main__ body used the return value of runfvp() as the exit code,
but this was never set.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Don't pass "" as the cwd as that fails, use None so the cwd doesn't get
changed.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
add debug.yml to the build command so the debug-tweaks image feature
is enabled
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This is no longer needed as Nanbield uses ttyrun to avoid re-spawning
gettys.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
corstone1000's uboot uses efitools-native from meta-efi-secure-boot, so
add the layer dependency to make this clear.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Use IMAGE_CLASSES rather than a direct INHERIT for fvpboot.
This is Yocto best practice as it is used to enable
functionality across all image recipes.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add systemready firmware, systemready ACS, systemready distros, and
fvp-base kas configurations. Update the README file with
instructions on how to build and run using them.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
1. Configure FVP base to allow Arm SystemReady IR ACS console access.
2. Configure FVP base Arm SystemReady IR ACS firmware build.
3. Add the machine-specific report.txt for FVP base.
4. Patch the check-sr-results.yaml and format-sr-results.yaml files
to handle the known differences between FVP base and the
expected ACS functionality.
5. Add a README with instructions of how to use the meta-arm-systemready
layer with fvp-base.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add the meta-arm-systemready layer. This provides the infrastructure to
load and run the Arm SystemReady IR ACS v2.0.0 prebuilt image and
analyze the results.
The recipes included are as follows:
1. arm-systemready-firmware: Enables the ARM_SYSTEMREADY_FIRMWARE machine
conf variable to be used to specify which firmware packages to deploy.
2. arm-systemready-ir-acs: Runs the Arm SystemReady IR ACS tests from
the pre-built images and checks the results adhere to the specification.
3. arm-systemready-linux-distros-[debian|opensuse]: Install the distro of
choice from CD/DVD image to target disk image.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Qi Feng <qi.feng@arm.com>
Signed-off-by: Robbie Cao <robbie.cao@arm.com>
Signed-off-by: Tomás González <tomasagustin.gonzalezorlando@arm.com>
Signed-off-by: Vineeth Raveendran <vineeth.raveendran@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
For fvp-base, update the DEFAULT_TEST_SUITES to include
fvp_boot and fvp_devices. This is only the default behaviour;
individual recipes can override this using the TEST_SUITES
variable.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Comments were made after previous optee changes were committed.
Addressing those comments here.
Suggested-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update capsule document procedure and ACS image in user guide.
Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update the recipes and patches for OP-TEE 4.0.0. Migrate the 3.22.0
recipe to meta-arm-bsp for corstone1000 and n1sdp.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Updating to the latest version of hafnium. Also, dropping tc patches,
as they are either experimental or a similar feature has been added.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Updates the status of the patches on the trusted-firmware-m for
corstone1000.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
U-boot mkefitool creates capsule image without packed and byte-aligned structs.
This patch aligns the capsule-update structures and avoids crashes in case of
unaligned pointer access.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Platform-specific capsule-update feature in u-boot does not check the
capsule-update flags properly (as stated in UEFI specs). This patch fixes the
capsule flags checks in u-boot for corstone1000.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Enables on-disk capsule update feature for corstone1000.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bump kernel version to v6.5 and rebased N1SDP kernel PCIe quirk patches top of this new version.
Signed-off-by: Xueliang Zhong <xueliang.zhong@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Some FVPs are available as x86-64 and aarch64 binaries, so build target
(qemuarm64) and nativesdk (x86-64) packages for these to verify the
checksums are correct.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Now that there's a FVP for aarch64, we don't need to pin the CI pipeline
to x86-64.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Now that the FVP supports both aarch64 and x86-64, this inherit doesn't
need to be conditional.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upgrade to the 11.22.35 release of the FVP.
Also add the aarch64 binaries as these are now available.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Configure grub as the EFI provider and remove the U-boot boot
args.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Configure FVP base to use vexpress_fvp_defconfig as the U-boot machine.
Configure U-boot:
1. Drop the patch to pick the DRAM size from the devicetree since
the FVP now specifies a devicetree.
2. Enable sysreset to reset by PSCI and patch the vexpress U-boot
machine to leave the reset to PSCI in this case.
3. Enable Virtio RNG and patch the U-boot Virtio RNG driver to
workaround an issue with the FVP that results in RNG calls
hanging.
4. Enable the Arm64 CRC-32 instruction by default and remove the now
redundant config setting.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Set the Trusted Firmware devicetree to fvp-base-gicv3-psci-1t. Patch the
devicetree to include: the stdout path for console access, a virtio net
node and a virtio rng node. This is necessary in the case that the
Trusted Firmware devicetree is passed to Linux from U-boot (rather than
sideloading).
Also rename the include file to change the suffix from "fvp" to "fvp-base".
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Merge the common FVP configuration in fvp-common.inc into
fvp-base.conf since that is the only place it is inherited.
Drop setting MACHINE_FEATURES to "optee" because there is no
optee machine feature.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Have separate machine include files rather than multiple
machine-specific settings in the same file.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
meta-clang and meta-virtualisation don't yet have nanbield branches, so
we need to use master for those at the moment.
Signed-off-by: Ross Burton <ross.burton@arm.com>
To allow running the TF-A TFTF tests we need to ensure the images for
N1SDP and Corstone-1000 MPS3 boards build
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
To allow running of the TF-A tests we need to be able to build the TF-A
test recipe for the N1SDP machine.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This change enables N1SDP cache to improve performance
by removing this patch:
HACK-disable-instruction-cache-and-data-cache.patch
Signed-off-by: Mariam Elshakfy <mariam.elshakfy@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Since the original location of OP-TEE in DDR3 observes
a HW issue when cache is enabled, this change moves OP-TEE
to run from DDR4. Patches are added to TF-A to reflect that
change and the used region is also reserved in UEFI (EDK2)
to protect against allocations by UEFI applications.
OP-TEE size is modified for consistency across all patches
to be 32 MB (0x02000000) instead of (0x02008000).
Signed-off-by: Mariam Elshakfy <mariam.elshakfy@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
the configuration options corresponding to external system are removed
from the kernel and the defconfig is generated with with savedefconfig
bitbake task
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Remove the External system patches in uboot as they are not upstreamable.
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This support is for Cassini distro using Corstone-1000 platform.
When running parsec test, it reports an error
`PSA_ERROR_DATA_INVALID (-153)`.
This is related to `ITS_MAX_ASSET_SIZE` configuration which is been
set to 512 on the secure enclave (TF-M), which defines the max asset
size and it overflows when running the parsec tests.
The key is generated, but when it is asked to store via `psa_its_set`
it returns `PSA_ERROR_INVALID_ARGUMENT (-135)`, which then propagates
to `PSA_ERROR_DATA_INVALID (-153)`
Increasing the `ITS_MAX_ASSET_SIZE` to 2048 solves this issue.
Signed-off-by: Vikas Katariya <vikas.katariya@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The terribly named qemutiny test case tries to login to the target over
the serial console. It's designed for poky-tiny, so add it to the tests
we run in poky-tiny builds.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Just execute all tests with the meta-arm tag, instead of hardcoding the
list of tests.
Also run two tests in parallel as there's no reason to limit it to one.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
