Updated to the latest version. Corstone1000 doesn't seem to boot. So,
pull back the old version to meta-arm-bsp for it to use temporarily.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Changes were needed due to the 2.0.0 version not being available for
download at pypi (though listed as the latest version there).
Signed-off-by: Jon Mason <jon.mason@arm.com>
Scripts processing data for the patch ages need correct information in
the relevant fields to determine the age. Create/correct this
information where missing/incorrect.
Signed-off-by: Jon Mason <jon.mason@arm.com>
The SHAs for both libmetal and open-amp are intermediate SHAs, which are
only a few patches behind the v2021.04.0 tags. Update to those tags and make
the necessary changes to get them working.
Signed-off-by: Jon Mason <jon.mason@arm.com>
oe-core master has upgraded from 6.5 to 6.6, but as we have BSPs that
still use 6.5 (corstone1000, n1sdp) we need to carry the recipe. This
should be a short-term measure as 6.5 was EOL in December 2023.
Also, drop the unused 6.4 linux-yocto which was no longer needed since
N1SDP moved to 6.5 with 21df60b.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The tftf tests were getting crashed on the MPS3 and two issues were found
during investigation. This change set provide fix for those issues:
1. The tftf tests were getting crashed on the MPS3 when compiled with
LOG_LEVEL=50. So, reducing the log level and aligning it with the TF-A
allows us to get rid of the crash.
2. Once the above crash got resolved, it has been found that tftf tests
were getting asserted while reading the value of the register
GICD_ITARGETSR. The reason for the crash is that the value of this register
is zero. As per the GIC documentation, this register is RAZ/WI for uniprocessor
implementation and corstone1000 is uniprocessor implementation for FPGA.
So, this change compiles the tftf tests in release mode which allows us
to compile out the assert definitions.
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add CI builds for Arm SystemReady Firmware within the fvp-base CI job and a new
Arm SystemReady IR ACS build job. Add the CI kas config for each of these
builds.
The ACS build can be controlled by the ACS_TEST GitLab variable to specify
whether or not to run the testimage. If this variable is not set, the
testimage step will not run. The job tag can be controlled by the ACS_TAG GitLab
variable.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add the parted-native dependency explicitly which is needed to
use wic commands.
Also explicitly inherit testimage. This means that the kas config
is no longer required to include it in IMAGE_CLASSES.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update tf-a and mbedtls to the latest versions. Also, migrate the
previous version to meta-arm-bsp for corstone1000.
NOTE: in v2.10, the fiptool makefile was changed to reference LDOPTS
instead of LDLIBS.
NOTE: commit 408cde8a59080ac2caa11c4d99474b2ef09f90df in tf-a modifies
the qemu_sbsa starting offset, and per the commit comment, it requires
the edk2 same change. This is why the edk-platforms SHA has been
changed. There are only 19 patches between the previous SHA and this
one (most of which are adding a single platform). So, it shouldn't be
too impactful to bump the SHA (instead of making it a patch to apply
on top of the existing SHA).
NOTE: tf-a-tests added LDFLAGS to the makefile, causing the need for it
to be removed in the recipe.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Now that we've released 4.3 and branched, we can switch master CI back
to master.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
We enable PAC/BTI out of the box, but all of the pieces (such as gcc and
glibc) need to support it for the final binary to be protected.
Add a minimal test recipe to verify that the "Hello, World" binary is
using PAC/BTI, and add it to oe-selftest.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Readthedocs server requires an absolute path from project's root
directory to find correct requirements.txt and conf.py.
Signed-off-by: Emekcan Aras <Emekcan.Aras@arm.com>
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Upgrade the Corstone-1000 YMLs as follows:
- Set the layers SHAs
- Align with Kas v4
- Update the layers list
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Add a note for Capsule update negative test scenario and fixes instructions
regarding distro-boot in Corstone-1000 user guide.
Signed-off-by: Emekcan Aras <Emekcan.Aras@arm.com>
Signed-off-by: Delane Brandy <delane.brandy@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Adds creating an EFI System Partition for Corstone-1000.
Signed-off-by: Emekcan Aras <Emekcan.Aras@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
align the release note with the upcoming CORSTONE1000-2023.11 release
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Use Ethernet over VirtIO on FVP due to lan91c111 Ethernet driver support dropped from U-Boot.
This patch enables virtio-net device in u-boot to pass ACS tests related to
NIC and PXE. The current ethernet device still works in linux kernel and
corstone1000-mps3 Ethernet device is supported by u-boot, so no change is
required regarding existing Ethernet device.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Adds virtio-net configuration to use virtio-net in corstone1000-fvp.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Update the user guide to include Linux distro installation on fvp
Signed-off-by: Delane Brandy <delane.brandy@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This fixes a race that is observed rarely in the FVP. It occurs in FVP
when tfm sends the notication ack in openamp, and then reset the access
request which resets the mhu registers before received by the host
processor. It implements the fix both in SE and the host processor openamp
wrapper. This solution enables polling on the status register of mhu until
the notificaiton is read by the host processor. (Inspired by
signal_and_wait_for_signal function in mhu_wrapper_v2_x.c in trusted-firmware-m
https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git/tree/platform/ext/target/arm/rss/common/native_drivers/mhu_wrapper_v2_x.c#n61)
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upgrade the Arm binary toolchains to the latest version. Of note, the
untarred directory has camelcased the "R" in Rel (which was "rel" in the
previous versions).
Signed-off-by: Jon Mason <jon.mason@arm.com>
The fvp-base machine uses a v8.4 tune and the FVP itself is configured
to be v8.4, so also tell TF-A to use v8.4.
This is normally done in the TF-A board configuration, but the fvp board
is configurable.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
We already tell the FVP to be v8.4 cores, so tell the compiler to
tune for that instruction set too.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This CVE is specific to NXP i.MX boards which are documented as being
shipped unsecure, as they're meant for development.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Jon Mason
Ross Burton
Emekcan Aras
Harsimran Singh Tungal
Debbie Martin
Abdellatif El Khlifi
Delane Brandy