This patch ignores the built-in FVP UART name when setting the terminal
names on tmux.
The rationale is that appending FVP UART name takes a lot of space
making it unusable on complex platforms with many terminals.
Signed-off-by: Filipe Rinaldi <filipe.rinaldi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The removed patch file breaks the U-Boot efi_selftest utility and has
been denied by upstream in any event. All subsequent patches renumbered.
Signed-off-by: Frazer Carsley <frazer.carsley@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
All patches have been rebased onto the v2025.10 release branch, with the
changes primarily being updating of offsets and surrounding code in each
hunk.
One minor change between v2024.04 and v2025.10 is that a
CONFIG_BOARD_INIT option was added and must be enabled in order to link
in the `board_init()` symbol. As such, the firmware update patch adding
`board_init()` has been modified to enable this option as well.
The patch that enabled OF_UPSTREAM has been modified slightly in order
to incorporate upstream changes between versions: the SMP changes to the
Corstone1000 FVP device tree were incorporated into the Linux kernel so
are no longer needed in the U-Boot specific device tree. As such, the
patch adding A320 support adds these CPU nodes in order to override them
where appropriate.
In the process, signatures are removed from each patch.
Beyond this, the directory in which U-Boot searches for the EFI capsule
CRT file changed from object tree to source tree, so the recipe is
updated to reflect that.
Signed-off-by: Frazer Carsley <frazer.carsley@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This fixes a build error due to:
patching file Makefile
Hunk #1 FAILED at 12.
1 out of 1 hunk FAILED -- rejects in file Makefile
Patch 0001-Makefile-Avoid-variable-override.patch can be reverse-applied
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Jon Mason <jon.mason@arm.com>
We have a newer gcc-arm-none-eabi now, so this can be removed.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Make changes across U-Boot, and OP-TEE OS to swap
the GIC-600 for GIC-700 as the latest version of the FVP
swaps the GIC.
Signed-off-by: Hugues KAMBA MPIANA <hugues.kambampiana@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bump Corstone-1000 machine OP-TEE version from 4.7.0
to version 4.9.0.
Signed-off-by: Hugues KAMBA MPIANA <hugues.kambampiana@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update Corstone-1000 documentation to reflect 2026 copyright and
current supported host environment.
Signed-off-by: Michael Safwat <michael.safwat@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
TF-A has a number for variables to control how host binaries are built:
- Our BUILD_CC is HOSTCC; this is set in the recipes
- Our BUILD_CFLAGS is HOSTCCFLAGS; this is not set
- Our BUILD_LDFLAGS has no corresponding variable
However when uninative is enabled we really need to pass BUILD_LDFLAGS
as otherwise there can be link problems:
ld: libcrypto.so: undefined reference to `__isoc23_strtol@GLIBC_2.38'
Patch into the TF-A makefiles support for HOSTLDFLAGS and ensure that we
set all three of the relevant BUILD_ variables.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
2 of the fvp-base specific u-boot patches were merged in the 2026.01
release. Remove those, as they are no longer necessary.
Signed-off-by: Jon Mason <jon.mason@arm.com>
The kernel upgrades are now in oe-core, so we can drop this workaround.
This reverts commit 341a0fd976.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The linux-yocto kernel has strict configuration warnings enabled and this
often causes warning, for example with 6.18.3:
[INFO]: the following symbols were not found in the active configuration:
- CONFIG_SND_SOC_ROCKCHIP
- CONFIG_SLIM_QCOM_CTRL
For these machines we're using the upstream defconfig and not a config
file that we're maintaining, so fixing these problems upstream is slower
than one would like.
As we don't maintain the config, we can disable the checker for these
two machines. This is _not_ precedence for disabling the audit for any
machines where we're not simply using the upstream defconfig without any
changes.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The path changed when the trusted-firmware-m recipe began to inherit
firmware.bbclass.
Signed-off-by: Frazer Carsley <frazer.carsley@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The paths for these files has changed due to the change to the
trusted-firmware-m recipe now using the custom firmware.bbclass.
Signed-off-by: Frazer Carsley <frazer.carsley@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
For builds using multiconfig, all of the firmware binaries listed were
being placed in the ${DEPLOYDIR} directly without preserving their
directory hierarchy. This meant that paths to firmware binaries relative
to the ${DEPLOYDIR} differed between builds depending on whether
multiconfig was enabled or not.
Signed-off-by: Frazer Carsley <frazer.carsley@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update edk2-firmware and edk2-basetools to the 202511 stable release.
Patches from upstream were needed to get it compiling with clang.
edk2 dropped support for 32bit arm and x86, see
https://edk2.groups.io/g/devel/topic/rfc_remove_ovmf_ia32_and/114152215
Therefore, we're dropping qemuarm edk2 testing and relevant bits
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add support for v2.14.0, and update corstone1000 config and patches to
use it. TF-A seems to have changed their poetry settings from POETRY to
host-poetry (when specifying an alternative location/disabling). So, it
is necessary to modify that for all platforms using COT and v2.14.0
NOTE: sbsa-ref is having issues with fip.bin being too large. So, set
the version to the LTS until that is resolved.
Signed-off-by: Jon Mason <jon.mason@arm.com>
In master, xen images fail to build as the xt-masquerade module is not
built by the kernel. This has been fixed in the linux-yocto 6.18.3
upgrade but that is not yet merged.
Until it is merged, we can temporarily update the kmeta in our CI.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Allow TF-M v2.2.2 to boot with Secure Debug enabled on Corstone-1000 and
align the driver implementation with the current psa-adac library.
- Add missing DRBG macros to fix the
"Failed to generate challenge!" error during Secure Debug.
- Fix an unintended platform reset occurring immediately after setting
the debug enable bits in the dcu_en register while in SE LCS.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The PCI subsystem with 6.18 is now warning on boot:
PCI: OF: of_root node is NULL, cannot create PCI host bridge node
Until this can be root-caused, ignore it.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
With kernel 6.18 the kernel will now warn if it tries to run a command
from a ramdisk but it cannot be found[1]. This happens with the
qemuarm64-secureboot machine (but not qemuarm64) because u-boot appears
to be populating the devicetree with a ramdisk entry:
loading kernel to address 40400000 size 1702a00
1 qfw ready qfw 0 qfw
** Booting bootflow 'qfw' with qfw
## Flattened Device Tree blob at 7e659890
Booting using the fdt blob at 0x7e659890
Working FDT set to 7e659890
Loading Ramdisk to 7bcfd000, end 7d3ffa00 ... OK
Loading Device Tree to 000000007d621000, end 000000007d626534 ... OK
Working FDT set to 7d621000
Starting kernel ...
The kernel tries to mount and boot this ramdisk but fails because it
isn't a valid initrd or initramfs. The boot continues as usual, but this
warning in the logs triggers parselogs.
Until the boot flow is properly resolved, ignore the message.
[1] linux 98aa4d5d242d ("init/main.c: add warning when file specified in rdinit is inaccessible")
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The TF-A can install files with dtb extension. This is not handled in
the firmware.bbclass so append it here.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Replace inherit deploy with firmware.
Initialize TFM_DEBUG using the FIRMWARE_DEBUG_BUILD variable. Initialize
TFM_PLATFORM with FIRMWARE_PLATFORM.
Refactor do_install to use ${FIRMWARE_DIR} and remove now redundant
configuration.
Refactor corstone1000 config files to use ${FIRMWARE_DIR} and the
base do_install.
Signed-off-by: Peter Hoyes <peter.hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Replace inherit deploy with firmware.
Initialize SCP_DEBUG using the FIRMWARE_DEBUG_BUILD variable. Initialize
SCP_PLATFORM using the FIRMWARE_PLATFORM variable.
Refactor do_install to use ${FIRMWARE_DIR} and remove now redundant
configuration.
Signed-off-by: Peter Hoyes <peter.hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Replace inherit deploy with firmware.
Initialize TFA_DEBUG using the FIRMWARE_DEBUG_BUILD variable. Initialize
TFA_PLATFORM with FIRMWARE_PLATFORM.
Refactor do_install to use ${FIRMWARE_DIR} and remove now redundant
configuration. Drop the redundant ${TFA_PLATFORM} suffixes.
Update BSP conf files to use the new deploy location, including
symlinking back to ${DEPLOYDIR} where necessary.
Signed-off-by: Peter Hoyes <peter.hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
There are now a handful of firmware component recipes in meta-arm, each
of which does its own (slightly different) deployment handling.
Introduce a bbclass to standardize this, with the aim of cleaning up the
DEPLOY_DIR_IMAGE. Crucially, each firmware component deploys into a
${PN} subdirectory of DEPLOY_DIR_IMAGE. This has a few advantages:
* Many Arm components have the same or similar binary names (BL1, BL2
etc). This ensures unique naming and avoids confusion.
* Recipes can afford to be less picky about which binaries are deployed.
This simplifies component recipes.
* It is easier to deploy debug symbols in a common way to an expected
location.
* It keeps the DEPLOY_DIR_IMAGE clean in the face of ever-increasing
firmware complexity.
The bbclass also provides a FIRMWARE_DEBUG_BUILD variable to control the
build type of the firmware in one place, defaulting to the global
DEBUG_BUILD. This should allow BSPs in meta-arm-bsp to more easily
provide a release build by default (by providing an easy switch for
development purposes when needed).
Signed-off-by: Peter Hoyes <peter.hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
There are times where we need to produce multiple versions of the
trusted-firmed binaries in a given build, but the names for the binaries
are hard-coded in the Makefile and do_install().
This patch adds a new variable, TFA_INSTALL_SUFFIX, that is added to
do_install() that can uniquely name the resulting binaries. By default,
the suffix is empty so that default behavior is not changed.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
When the git version of this recipe was created, the application of local
patches was left out.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update TF-M to the latest hotfix release and rebase the Corstone1000
patches, and drop
0008-Platform-Corstone1000-Increase-BL1-size-and-align-bi.patch
0009-Platform-CS1K-Adapt-ADAC-enabled-build-to-the-new-BL.patch
as they are in the TF-Mv2.2.2 release
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add git recipe versions that track the latest git versions of u-boot and
the various OP-TEE recipes. This, in combination with the previously
existing trusted firmware a and m recipes, allows for using the latest
code in platform development and testing (as part of CI).
For CI usage, a KAS yml file has been created to allow for those recipes
to be used, and an entry for fvp-base has been added to the gitlab CI
yml file.
NOTE: the wildcard for corstone1000 u-boot PREFERRED_VERSION was causing
it to pick-up the newest version (and failing to apply the patches).
The wildcard is unnecessary, since it is using a layer supplied package.
So, remove it and everyone is happy.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update the TF-A git recipe to the latest tag. The license SHA needed to
be updated due to adding of some memmap sources from mbed, which are
under the Apache 2.0 license, which is already present in the inc file.
Signed-off-by: Jon Mason <jon.mason@arm.com>
u-boot has accepted some of the fvp-base patches. Take the upstream
versions and rebase the third patch to apply.
Signed-off-by: Jon Mason <jon.mason@arm.com>
- Document Corstone‑1000 platform architecture based on the Cortex‑A320 core
- Add test specification and guide for Corstone‑1000 with Cortex‑A320
Signed-off-by: Hugues KAMBA MPIANA <hugues.kambampiana@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update Corstone-1000 U-Boot device tree for the Cortex-A320 variant
and enable GICv3/GIC-600, while keeping compatibility with the
existing GIC-400 setup. A single DT image now supports either
configuration via Kconfig guards.
**Device-tree updates (Cortex-A320)**
* Map Ethos-U85 NPU registers at `0x1A050000` (16 KiB) and its SRAM at
`0x02400000` (2 MiB, no-map), plus a 32 MiB DDR carve-out for DMA.
* Add `/ethosu@1a050000` with interrupts, `dma-ranges`, `cs-region`,
and `ethosu-mem-config` for driver probe.
* Guard the NPU node behind `CONFIG_ETHOS_U85`.
* Add a Cortex-A320 compatible string to the Corstone-1000 DTS
downstream.
**GICv3/GIC-600 selection**
* Introduce `CONFIG_GIC_V3` to select the new interrupt controller.
* Add a full GICv3/GIC-600 node guarded by `#ifdef CONFIG_GIC_V3`.
* When GICv3 is enabled, set `cpu@1..3` `reg` to `0x100/0x200/0x300`
(retain `0x1/0x2/0x3` for GIC-400).
* Update the Ethos-U85 interrupt to **SPI 16** to match the interrupt
map.
Signed-off-by: Frazer Carsley <frazer.carsley@arm.com>
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Enable Trusted Firmware-A for Corstone-1000 platforms with Cortex-A320 and
switch the interrupt controller from GICv2/GIC-400 to GICv3/GIC-600.
**Platform/feature enablement**
* Map Ethos-U85 NPU registers (`0x1A050000`, 16 KiB) and its SRAM region
(`0x02400000`, 4 MiB) into Normal World
(`MT_DEVICE | MT_RW | MT_NS` / `MT_MEMORY | MT_RW | MT_NS`).
* Force Cortex-A320 feature selection: enable Armv9 features, disable
Cortex-A35 errata, and select the `cortexa320` override in
`trusted-firmware-a-corstone1000.inc`.
* Build TF-A-Tests with `CORSTONE1000_CORTEX_A320=1` to skip non-applicable
FF-A, PSCI, and CPU-extension tests on Cortex-A320.
**GICv3/GIC-600 transition (A320 builds)**
* Update `plat_my_core_pos()` and `plat_arm_calc_core_pos()` to compute the
linear core position using the Cortex-A320 MPIDR_EL1 affinity layout.
* Add an A320-specific core-position routine in assembly, guarded by
`CORSTONE1000_CORTEX_A320`.
* Switch to the GICv3 driver with GIC-600 extensions:
* Update platform GIC base addresses to the GIC-600 layout.
* Use GICv3 APIs; set `USE_GIC_DRIVER=3`, `GICV3_SUPPORT_GIC600=1`,
and `GIC_ENABLE_V4_EXTN=1`.
* Keep conditional GIC versioning so Cortex-A35 continues to use GICv2/GIC-400.
These changes ensure correct GIC configuration and reliable secondary-core
bring-up on Cortex-A320 while preserving existing Cortex-A35 behavior.
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Frazer Carsley <frazer.carsley@arm.com>
Signed-off-by: Michael Safwat <michael.safwat@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Enable full Corstone‑1000 Cortex‑A320 DSU‑120T platform support in TF‑M:
- Reserve a 4 MiB Host SRAM region at 0x0240_0000 for the
Cortex‑A320 normal world and open it in the CVM firewall
(region 2), gated by `CORSTONE1000_CORTEX_A320``.
- Introduce a DSU‑120T Power-Policy Unit driver plus a
`CORSTONE1000_DSU_120T` CMake option to power on the Cortex‑A320
host cluster with proper secure-enclave firewall and memory-map
setup.
- Add a CMake platform define that auto‑activates when the
`cortexa320` machine feature is present, injecting
DSU‑120T‑specific compile definitions.
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update the OP-TEE OS build logic to detect `MACHINE_FEATURES` and
append the appropriate `arm64-platform-cpuarch` value to
`EXTRA_OEMAKE`, instead of hard-coding `cortex-a35`.
This change ensures that when `MACHINE_FEATURES` includes
`cortexa320`, the OP-TEE build receives the matching `core-arch` flag,
while maintaining `cortex-a35` as the default.
The new Corstone-1000 variant with Cortex-A320 replaces the original
GIC-400 (v2) interrupt controller with a GIC-600, which is
architecturally compliant with GICv3. Since OP-TEE already provides
a generic GICv3 driver, only minimal platform changes are needed
to expose the updated register map and initialize the GICv3 interface.
Signed-off-by: Hugues KAMBA MPIANA <hugues.kambampiana@arm.com>
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Jon Mason
Filipe Rinaldi
Frazer Carsley
Jan Luebbe
Ross Burton
Hugues KAMBA MPIANA
Michael Safwat
Devaraj Ranganna
Bence Balogh
Peter Hoyes
Ryan Eatmon
Harsimran Singh Tungal