align the release note with the upcoming CORSTONE1000-2023.11 release
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Use Ethernet over VirtIO on FVP due to lan91c111 Ethernet driver support dropped from U-Boot.
This patch enables virtio-net device in u-boot to pass ACS tests related to
NIC and PXE. The current ethernet device still works in linux kernel and
corstone1000-mps3 Ethernet device is supported by u-boot, so no change is
required regarding existing Ethernet device.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Adds virtio-net configuration to use virtio-net in corstone1000-fvp.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
Update the user guide to include Linux distro installation on fvp
Signed-off-by: Delane Brandy <delane.brandy@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This fixes a race that is observed rarely in the FVP. It occurs in FVP
when tfm sends the notication ack in openamp, and then reset the access
request which resets the mhu registers before received by the host
processor. It implements the fix both in SE and the host processor openamp
wrapper. This solution enables polling on the status register of mhu until
the notificaiton is read by the host processor. (Inspired by
signal_and_wait_for_signal function in mhu_wrapper_v2_x.c in trusted-firmware-m
https://git.trustedfirmware.org/TF-M/trusted-firmware-m.git/tree/platform/ext/target/arm/rss/common/native_drivers/mhu_wrapper_v2_x.c#n61)
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upgrade the Arm binary toolchains to the latest version. Of note, the
untarred directory has camelcased the "R" in Rel (which was "rel" in the
previous versions).
Signed-off-by: Jon Mason <jon.mason@arm.com>
The fvp-base machine uses a v8.4 tune and the FVP itself is configured
to be v8.4, so also tell TF-A to use v8.4.
This is normally done in the TF-A board configuration, but the fvp board
is configurable.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
We already tell the FVP to be v8.4 cores, so tell the compiler to
tune for that instruction set too.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This CVE is specific to NXP i.MX boards which are documented as being
shipped unsecure, as they're meant for development.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Changes ns-interrupt-action for corstone1000. This will enable
preemption in the SPs which is the default way to handle interrupts in
trusted-firmware and optee documentation.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
When booting, the tee driver from kernel side
invokes a yielding call to OP-TEE, which gets
stuck because OP-TEE never sends Done response:
OPTEE_FFA_YIELDING_CALL_RETURN_DONE
This issue was previously resolved by introducing
an inappropriate patch to the kernel with 1 ms delay
in ffa_msg_send_direct_req.
Further investigation proved that OP-TEE doesn't
get enough processing time and is constantly interrupted
by the kernel requests. To remove this patch, TF-A logging
level is lowered to default (40 in debug builds and
20 in release builds), which eliminates the time consumed
previously by TF-A VERBOSE logs (giving OP-TEE more
processing time).
Signed-off-by: Mariam Elshakfy <mariam.elshakfy@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Corstone1000 capsule update implementation does not support use of
scatter_gather_list. This workaround passes 1 as scatter_gather_list value
to pass the NULL checks for scatter_gather_list while
CAPSULE_FLAGS_PERSIST_ACROSS_RESET flag is set (which is introduced lately to
align with UEFI specs). Since these flag checks are not implemented in u-boot
properly and corstone1000 does not support scatter_gather_list during capsule
update, this patch will skip the check only for on-disk capsule update.
This will be fixed with new capsule update design.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add an optional env argument to the run_fvp() function, and check that
DISPLAY is preserved.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The __main__ body used the return value of runfvp() as the exit code,
but this was never set.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Don't pass "" as the cwd as that fails, use None so the cwd doesn't get
changed.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
add debug.yml to the build command so the debug-tweaks image feature
is enabled
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This is no longer needed as Nanbield uses ttyrun to avoid re-spawning
gettys.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
corstone1000's uboot uses efitools-native from meta-efi-secure-boot, so
add the layer dependency to make this clear.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Use IMAGE_CLASSES rather than a direct INHERIT for fvpboot.
This is Yocto best practice as it is used to enable
functionality across all image recipes.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add systemready firmware, systemready ACS, systemready distros, and
fvp-base kas configurations. Update the README file with
instructions on how to build and run using them.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
1. Configure FVP base to allow Arm SystemReady IR ACS console access.
2. Configure FVP base Arm SystemReady IR ACS firmware build.
3. Add the machine-specific report.txt for FVP base.
4. Patch the check-sr-results.yaml and format-sr-results.yaml files
to handle the known differences between FVP base and the
expected ACS functionality.
5. Add a README with instructions of how to use the meta-arm-systemready
layer with fvp-base.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add the meta-arm-systemready layer. This provides the infrastructure to
load and run the Arm SystemReady IR ACS v2.0.0 prebuilt image and
analyze the results.
The recipes included are as follows:
1. arm-systemready-firmware: Enables the ARM_SYSTEMREADY_FIRMWARE machine
conf variable to be used to specify which firmware packages to deploy.
2. arm-systemready-ir-acs: Runs the Arm SystemReady IR ACS tests from
the pre-built images and checks the results adhere to the specification.
3. arm-systemready-linux-distros-[debian|opensuse]: Install the distro of
choice from CD/DVD image to target disk image.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Qi Feng <qi.feng@arm.com>
Signed-off-by: Robbie Cao <robbie.cao@arm.com>
Signed-off-by: Tomás González <tomasagustin.gonzalezorlando@arm.com>
Signed-off-by: Vineeth Raveendran <vineeth.raveendran@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
For fvp-base, update the DEFAULT_TEST_SUITES to include
fvp_boot and fvp_devices. This is only the default behaviour;
individual recipes can override this using the TEST_SUITES
variable.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Comments were made after previous optee changes were committed.
Addressing those comments here.
Suggested-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update capsule document procedure and ACS image in user guide.
Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update the recipes and patches for OP-TEE 4.0.0. Migrate the 3.22.0
recipe to meta-arm-bsp for corstone1000 and n1sdp.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Updating to the latest version of hafnium. Also, dropping tc patches,
as they are either experimental or a similar feature has been added.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Updates the status of the patches on the trusted-firmware-m for
corstone1000.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
U-boot mkefitool creates capsule image without packed and byte-aligned structs.
This patch aligns the capsule-update structures and avoids crashes in case of
unaligned pointer access.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Platform-specific capsule-update feature in u-boot does not check the
capsule-update flags properly (as stated in UEFI specs). This patch fixes the
capsule flags checks in u-boot for corstone1000.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Enables on-disk capsule update feature for corstone1000.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bump kernel version to v6.5 and rebased N1SDP kernel PCIe quirk patches top of this new version.
Signed-off-by: Xueliang Zhong <xueliang.zhong@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Some FVPs are available as x86-64 and aarch64 binaries, so build target
(qemuarm64) and nativesdk (x86-64) packages for these to verify the
checksums are correct.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Now that there's a FVP for aarch64, we don't need to pin the CI pipeline
to x86-64.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Abdellatif El Khlifi
Emekcan Aras
Delane Brandy
Ross Burton
Jon Mason
Mariam Elshakfy
Debbie Martin
Ali Can Ozaslan
Xueliang Zhong