For some reason the kas 3.2.1 container fails:
No such file or directory: '/builds/engineering/yocto/meta-arm/ci/ci/base.yml'
Note the repeated /ci/, which is wrong.
Pin the kas container to 3.2 for now until this is resolved.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Change u-boot and machine config to default to booting a compressed
initramfs. This allows for easier testing. A compressed image is
needed as the image is too big for the storage, and the error notifying
of such is vague.
Signed-off-by: Jon Mason <jon.mason@arm.com>
meta-gem5 needs the 5.4 kernel, which is only present in the
meta-arm-bsp layer. Add this as a dependency to resolve issues.
Signed-off-by: Jon Mason <jon.mason@arm.com>
This appears to be historical from when the toolchain was in meta-linaro.
It isn't needed anymore, there's one bbappend in meta-arm-toolchain for
grub which is part of oe-core, so will never be dangling.
This variable has a global effect, so leaving it in here has a negative
impact on users.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The boot crash that appears to be triggered by the ZONE_DMA patches has
been root-caused, so work around the problem whilst upstream figure out
the best way to fix.
Also, upgrade qemuarm64-secureboot to 5.15 instead of pinning back to
5.10.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Check for telnet on startup to avoid mysterious failures later when
telnet isn't available.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
runfvp could encounter an error but the exit code remained as 0.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Since 10e60cc the terminal_map doesn't exist, this piece of code wasn't
updated.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Rewrite the terminal code to have a priority list of terminals when
selecting a default, allow the user to pick a default with a
configuration file, and add gnome-terminal to the list.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Only pass a console_cb if we're hooking up a console, so that the output
from the FVP is visible on the terminal.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Don't raise an exception if the FVP has quit before we get around to
killing it.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This commit updates Tfa SHA to remove the patches from the
recipe since all of them are upstreamed now.
Signed-off-by: Emekcan Aras emekcan.aras@arm.com
Signed-off-by: Jon Mason <jon.mason@arm.com>
Remove unwanted build images that push the binaries size over the size
limit for corstone1000.
Signed-off-by: Harry Moulton <harry.moulton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Backport of 7fc51c7c from master which removes some redundant code to
reduce the size of the resulting corstone1000 binary.
Signed-off-by: Harry Moulton <harry.moulton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Backport patch from upstream to address the following error:
scripts/dtc/dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; scripts/dtc/dtc-lexer.lex.o:(.bss+0x0): first defined here
Signed-off-by: Jon Mason <jon.mason@arm.com>
To make it easier for users to test and evaluate the FVP, including
testing inbound network connections, enable the openssh SSH server by
default and map to port 8022 on the host.
Update fvp-baser-aemv8r64 documentation accordingly in new "Networking"
section.
Issue-Id: SCM-3881
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I88329731418e198e2ef5d3449bfb38fde5ae77bb
Signed-off-by: Jon Mason <jon.mason@arm.com>
Backport patch from master to update the URL and checksums for the
new Corstone1000 FVP version 11.17.23.
Signed-off-by: Harry Moulton <harry.moulton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Backport patch from master to update the sha for meta-arm-image in
the corstone1000 kas file to add support for kirkstone.
Signed-off-by: Harry Moulton <harry.moulton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
* Include `--upgrade` in pip3 command to ensure latest kas version is
installed
* Ensure all underscores are either quoted or escaped
* Fix P9 example command
Issue-Id: SCM-3881
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: Ie460dbd6b1f87f5f9ca2966329341d22da3606d3
Signed-off-by: Jon Mason <jon.mason@arm.com>
Also update version and download link in meta-arm-bsp fvp-baser-aemv8r64
documentation
Issue-Id: SCM-3871
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I92ec616d25703ff74ed063918a1e4811bac9ff3f
Add more details about the cache_state_modelled limitation, which can
worked around by setting cci400.force_on_from_start=1
Issue-Id: SCM-3871
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: Idde23278a87316dae842c6c3793b9836482e8c3a
* Add clarification on how to mount p9 device
* Remove instruction to use ctrl + c to stop FVP
* Add cache_state_modelled to Known Issues
Issue-Id: SCM-3871
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I122c5ae5b3ceee1d106205d93a006f75bdbfa2bf
Signed-off-by: Jon Mason <jon.mason@arm.com>
Document U-Boot addition, add new architecture section and update the
change log.
Issue-Id: SCM-3871
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: Ie0e1ff35ade634f2b523c14bb058c9d775802632
Signed-off-by: Jon Mason <jon.mason@arm.com>
Enable the bp.refcounter.use_real_time option, so that the CNTPCT_EL0
increments in real-time instead of simulator time.
Issue-Id: SCM-3871
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I197d6de4a7316e5299aee34e64e149cbd3d515a9
Signed-off-by: Jon Mason <jon.mason@arm.com>
The FVP default configuration has bp.dram_size=4, which is sufficient
for development and testing purposes, so remove the FVP_CONFIG
override and set to 4 Gb in the device tree.
Issue-Id: SCM-3871
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I4a96062c9e94d36f5459f33c86aab4d4885bab43
Signed-off-by: Jon Mason <jon.mason@arm.com>
This patch introduces U-Boot into the fvp-baser-aemv8r64 boot flow,
providing EFI services.
The fvp-baser-aemv8r64 does not have an EL3, so the system starts at
S-EL2. For now, U-Boot is running at S-EL2, alongside boot-wrapper.
Enable the --enable-keep-el option in boot-wrapper-aarch64 so that it
boots the next stage (U-Boot) at S-EL2. Additionally, tell
boot-wrapper-aarch64 to bundle U-Boot instead of the kernel.
Linux only supports booting from S-EL1 on the fvp-baser-aemv8r64, so
U-Boot is configured with CONFIG_SWITCH_TO_EL1, so that booti or bootefi
switch to S-EL1 before booting the EFI payload (unless an enviornment
variable - armv8_switch_to_el1 - is set to 'n').
Add patches to U-Boot, which:
* Backports 53b40e8d54fcdb834e10e6538084517524b8401b, to disable
pointer authentication traps.
* Add board support for the fvp-baser-aemv8r64 (with a memory map
which is inverted from the fvp-base).
* Enable the configuration of U-Boot using the device tree passed from
boot-wrapper-aarch64.
* Enable virtio-net.
* Disable setting the exception vectors at S-EL2 so that the PSCI
vectors pass through to Linux.
* Set up system registers at S-EL2 for Linux.
* Configure the S-EL2 MPU for the EFI services.
* Allows bootefi to switch to EL1 before booting Linux.
Issue-Id: SCM-3871
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I229d14b0717df412c1fe33772230ca779f79b32d
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update the SRCREV to a more recent revision for the fvp-baser-aemv8r64.
Update the machine-specific patches, which makes the following changes:
* Add PSCI services to /memreserve/ in the device tree using libfdt.
* Add --enable-keep-el option, which allows boot-wrapper-aarch64 to
boot the next stage at the same exception level.
* Update the counter frequency to 100 MHz.
Issue-Id: SCM-3871
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: I41843e958cf629d69de644bb57b660fb542fc8b7
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upgrade boot-wrapper-aarch64 to 1044c77062573985f7c994c3b6cef5695f57e955
Hold back gem5 at 8d5a765251d9113c3c0f9fa14de42a9e7486fe8a in bbappend.
Issue-Id: SCM-3871
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: Ia5ccca2234dd117d530970f9f90469dacbb778e3
Signed-off-by: Jon Mason <jon.mason@arm.com>
The Linux kernel expects the peripheral ID register to be just below the
end of the address range, which for the PL011 and SP805 is at 0xFE0 not
0xFFE0, so set the size to 0x1000.
Issue-Id: SCM-3881
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Change-Id: Iada28e8192d72b1647822c33d13deffe507043b5
Signed-off-by: Jon Mason <jon.mason@arm.com>
This commit moves all the trusted-services patches to a new
corstone1000 directory.
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This commit updates the meta-arm-image SHA to drop psa-arch-test
from the build.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This change is to build and install psa-arch-tests using
trusted-services code and drop psa-arch-tests recipe.
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This change is to update TF-M git SHA to fix
psa-arch-tests test case failures.
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This commit replaces mbedcrpyto with mbedtls on the trusted-service
recipe.
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
If we don't specify a tag name GitLab uses the 'latest' tag, which for
Kas is moved whenever an image build is made.
Instead explicitly use the latest-release tag, which is only updated
when a release is made.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
By having the generic-arm64 machine using the same kernel config as the
linux-yocto standard kernel type, application layers can rely on the same base
configuration, independently of the target machine.
Also, the kernel-yocto.bbclass searches for .scc files in the FILESEXTRAPATHS.
Hence, we don't need to list generic-arm64-standard.scc in the SRC_URI.
Issue-Id: SCM-3910
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Change-Id: I46889ce38b32521d8350534cc590b57b158ad573
Signed-off-by: Jon Mason <jon.mason@arm.com>
This change is to upgrade TF-M to latest git hash which contains
fix for capsule instability issue for corstone1000 platform.
Latest TF-M would also require v3.1 mbedtls. Also updated git hash
for mbedtls repo.
On corstone1000 platform, Secure Enclave will be expecting
an event from uboot when it performs capsule update. Previously,
an event is sent at exitbootservice level. This will create a problem
when user wants to interrupt at UEFI shell, hence, it is required
to send an uboot efi initialized event at efi sub-system initialization
stage.
Change-Id: I7d16e184675d537d790365e1b03a414ac802694a
Signed-off-by: Vishnu Banavath <vishnu.banavath@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
