arm/linux-arm64-ack: update branch name

The "deprecated" string was added to the branch name, which was causing the SHA not to be found. Update to the new name. Signed-off-by: Jon Mason <jon.mason@arm.com>
CI: pin to kas 3.2 as 3.2.1 fails
2026-07-18 04:27:08 +00:00 · 2023-11-27 17:43:33 -05:00 · 2023-02-09 12:40:13 +00:00 · 2023-01-09 10:00:06 -05:00 · 2023-01-09 10:00:06 -05:00 · 2022-12-15 17:06:52 +00:00
735 changed files with 13093 additions and 34829 deletions
@@ -1 +0,0 @@
-__pycache__
@@ -1,6 +1,13 @@
-image: ghcr.io/siemens/kas/kas
+image: ghcr.io/siemens/kas/kas:3.2
+
+variables:
+  CPU_REQUEST: ""
+  DEFAULT_TAG: ""
+  # These are needed as the k8s executor doesn't respect the container entrypoint
+  # by default
+  FF_USE_LEGACY_KUBERNETES_EXECUTION_STRATEGY: 0
+  FF_KUBERNETES_HONOR_ENTRYPOINT: 1

-# First do a common bootstrap, and then build all the targets
 stages:
  - prep
  - bootstrap
@@ -8,47 +15,35 @@ stages:

 # Common job fragment to get a worker ready
 .setup:
+  tags:
+    - $DEFAULT_TAG
  stage: build
-  interruptible: true
  variables:
    KAS_WORK_DIR: $CI_PROJECT_DIR/work
    KAS_REPO_REF_DIR: $CI_BUILDS_DIR/persist/repos
    SSTATE_DIR: $CI_BUILDS_DIR/persist/sstate
    DL_DIR: $CI_BUILDS_DIR/persist/downloads
    BB_LOGCONFIG: $CI_PROJECT_DIR/ci/logging.yml
-    TOOLCHAIN_DIR: $CI_BUILDS_DIR/persist/toolchains
    IMAGE_DIR: $CI_PROJECT_DIR/work/build/tmp/deploy/images
-    TOOLCHAIN_LINK_DIR: $CI_PROJECT_DIR/work/build/toolchains
  before_script:
    - echo KAS_WORK_DIR = $KAS_WORK_DIR
    - echo SSTATE_DIR = $SSTATE_DIR
    - echo DL_DIR = $DL_DIR
    - rm -rf $KAS_WORK_DIR
-    - mkdir --verbose --parents $KAS_WORK_DIR $KAS_REPO_REF_DIR $SSTATE_DIR $DL_DIR $TOOLCHAIN_DIR $TOOLCHAIN_LINK_DIR
-    # Must do this here, as it's the only way to make sure the toolchain is installed on the same builder
-    - ./ci/get-binary-toolchains $DL_DIR $TOOLCHAIN_DIR $TOOLCHAIN_LINK_DIR
-    - sudo apt update && sudo apt install telnet -y
+    - mkdir --verbose --parents $KAS_WORK_DIR $KAS_REPO_REF_DIR $SSTATE_DIR $DL_DIR

 # Generalised fragment to do a Kas build
 .build:
  extends: .setup
+  variables:
+    KUBERNETES_CPU_REQUEST: $CPU_REQUEST
+  interruptible: true
  script:
    - KASFILES=$(./ci/jobs-to-kas $CI_JOB_NAME)
    - kas shell --update --force-checkout $KASFILES -c 'cat conf/*.conf'
    - kas build $KASFILES
    - ./ci/check-warnings $KAS_WORK_DIR/build/warnings.log

-# Workaround for Zephyr not currectly handling TESTIMAGE_AUTO
-.build_and_test:
-  extends: .setup
-  script:
-    - KASFILES=$(./ci/jobs-to-kas $CI_JOB_NAME)
-    - kas shell --update --force-checkout $KASFILES -c 'cat conf/*.conf'
-    - kas build $KASFILES
-    - kas build $KASFILES -c testimage
-    - ./ci/check-warnings $KAS_WORK_DIR/build/warnings.log
-
-
 #
 # Prep stage, update repositories once
 #
@@ -56,7 +51,8 @@ update-repos:
  extends: .setup
  stage: prep
  script:
-    - flock --verbose --timeout 60 $KAS_REPO_REF_DIR ./ci/update-repos
+  - flock --verbose --timeout 60 $KAS_REPO_REF_DIR ./ci/update-repos
+

 #
 # Bootstrap stage, bootstrap and machine coverage
@@ -68,89 +64,36 @@ n1sdp/bootstrap:
  extends: .build
  stage: bootstrap

-n1sdp/clang/clang-bootstrap:
-  extends: .build
-  stage: bootstrap
-
 # What percentage of machines in the layer do we build
 machine-coverage:
  stage: bootstrap
-  interruptible: true
+  tags:
+    - $DEFAULT_TAG
  script:
-    - ./ci/check-machine-coverage
+  - ./ci/check-machine-coverage
  coverage: '/Coverage: \d+/'

+
 #
 # Build stage, the actual build jobs
 #

-# Validate layers are Yocto Project Compatible
-check-layers:
-  extends: .setup
-  coverage: '/Coverage: \d+/'
-  script:
-    - kas shell --update --force-checkout ci/base.yml:ci/meta-arm-autonomy.yml:ci/meta-openembedded.yml --command \
-      "$CI_PROJECT_DIR/ci/check-layers.py $CI_PROJECT_DIR/ci/check-layers.yml $CI_PROJECT_DIR $KAS_WORK_DIR"
-
-pending-updates:
-  extends: .setup
-  artifacts:
-    paths:
-      - update-report.html
-  script:
-    - kas shell ci/qemuarm64.yml:ci/meta-openembedded.yml -c "$CI_PROJECT_DIR/scripts/machine-summary.py -t updates.html -o $CI_PROJECT_DIR/update-report.html $($CI_PROJECT_DIR/ci/listmachines.py meta-arm meta-arm-bsp)"
-
-corstone500:
+a5ds:
  extends: .build

-corstone700-fvp:
+foundation-armv8:
  extends: .build

-corstone700-mps3:
-  extends: .build
-
-fvp-base/testimage:
-  extends: .build
-  tags:
-  - x86_64
-
-fvp-base-arm32:
-  extends: .build
-
-fvp-base-arm32/external-gccarm:
-  extends: .build
-
-fvp-baser-aemv8r64:
-  extends: .build
-
-fvps:
+fvp-base:
  extends: .build

 gem5-arm64:
  extends: .build

-gem5-arm64/xen:
-  extends: .build
-
-gem5-atp-arm64:
-  extends: .build
-
-generic-arm64:
-  extends: .build
-
 juno:
  extends: .build

-juno/clang:
-  extends: .build
-
-microbit-v1/testimage-zephyr:
-  extends: .build_and_test
-
-musca-b1:
-  extends: .build
-
-musca-s1:
+juno/musl:
  extends: .build

 n1sdp:
@@ -159,60 +102,15 @@ n1sdp:
 n1sdp/armgcc:
  extends: .build

-qemu-cortex-a53:
-  extends: .build
-
-qemu-cortex-m3/testimage-zephyr:
-  extends: .build_and_test
-
-qemu-cortex-r5:
-  extends: .build
-
-qemuarm64-sbsa:
-  extends: .build
-
-qemuarm64-secureboot/testimage:
-  extends: .build
-
-qemuarm64-secureboot/clang/testimage:
-  extends: .build
-
-qemuarm64-secureboot/clang/musl/testimage:
-  extends: .build
-
-qemuarm64-secureboot/musl/testimage:
-  extends: .build
-
-qemuarm64/xen:
-  extends: .build
-
-qemuarm/clang/testimage:
-  extends: .build
-
 qemuarm/testimage:
  extends: .build

-qemuarm/xen:
-  extends: .build
-
 qemuarmv5/testimage:
  extends: .build

-sgi575:
-  extends: .build
-
 tc0:
  extends: .build
-  tags:
-    - x86_64

-tc1:
-  extends: .build
-  tags:
-    - x86_64
-
-toolchains:
-  extends: .build

 #
 # Utility tasks, not executed automatically
@@ -223,14 +121,14 @@ delete-dl-dir:
  stage: prep
  when: manual
  script:
-    - rm -rf $DL_DIR/*
+  - rm -rf $DL_DIR/*

 delete-repo-dir:
  extends: .setup
  stage: prep
  when: manual
  script:
-    - rm -rf $KAS_REPO_REF_DIR/*
+  - rm -rf $KAS_REPO_REF_DIR/*

 # Delete all sstate
 delete-sstate:
@@ -238,14 +136,7 @@ delete-sstate:
  stage: prep
  when: manual
  script:
-    - rm -rf $SSTATE_DIR/*
-
-delete-toolchains:
-  extends: .setup
-  stage: prep
-  when: manual
-  script:
-    - rm -rf $TOOLCHAIN_DIR/*
+  - rm -rf $SSTATE_DIR/*

 # Wipe out old sstate
 prune-sstate:
@@ -253,9 +144,9 @@ prune-sstate:
  stage: prep
  when: manual
  script:
-    - du -h -s $SSTATE_DIR
-    - find $SSTATE_DIR -type f -atime +30 -delete
-    - du -h -s $SSTATE_DIR
+  - du -h -s $SSTATE_DIR
+  - find $SSTATE_DIR -type f -atime +30 -delete
+  - du -h -s $SSTATE_DIR

 # Report on disk usage
 usage:
@@ -263,4 +154,4 @@ usage:
  stage: prep
  when: manual
  script:
-    - du -h -s $DL_DIR $SSTATE_DIR $KAS_REPO_REF_DIR $TOOLCHAIN_DIR
+  - du -h -s $DL_DIR $SSTATE_DIR $KAS_REPO_REF_DIR
@@ -1,46 +1,23 @@
 Introduction
 ------------
-This repository contains the Arm layers for OpenEmbedded.
+This repository contains Arm layers for OpenEmbedded

-* meta-arm
+meta-arm:
+	This layer provides support for general recipes for the Arm
+	architecture.  Anything that's not needed explicitly for BSPs, the IOTA
+	distribution, or destined to be upstreamed belongs here.

-  This layer contains general recipes for the Arm architecture, such as firmware, FVPs, and Arm-specific integration.
+meta-arm-bsp:
+	This layer provides support for Arm reference platforms

-* meta-arm-autonomy
+meta-arm-iota:
+	This layer provides support for Arm's IOTA Linux Distribution

-  This layer is the distribution for a reference stack for autonomous systems.
+meta-arm-toolchain:
+	This layer provides support for Arm's GNU-A toolset releases

-* meta-arm-bsp
-
-  This layer contains machines for Arm reference platforms, for example FVP Base, N1SDP, and Juno.
-
-* meta-arm-toolchain
-
-  This layer contains recipes for Arm's binary toolchains (GCC and Clang for -A and -M), and a recipe to build Arm's GCC.
-
-* meta-atp
-
-  This layer contains recipes for the Adaptive Traffic Generation integration into meta-gem5.
-
-* meta-gem5
-
-  This layer contains recipes and machines for gem5, a system-level and processor simulator.
-
-
-Other Directories
-----------------
-
-* ci
-
-  This directory contains gitlab continuous integration configuration files (KAS yaml files) as well as scripts needed for this
-
-* kas
-
-  This directory contains KAS yaml files to describe builds for systems not used in CI
-
-* scripts
-
-  This directory contains scripts used in running the CI tests
+meta-arm-autonomy:
+    This layer provides a reference stack for autonomous systems.

 Contributing
 ------------
@@ -48,26 +25,14 @@ Currently, we only accept patches from the meta-arm mailing list.  For general
 information on how to submit a patch, please read
 https://www.openembedded.org/wiki/How_to_submit_a_patch_to_OpenEmbedded

-E-mail meta-arm@lists.yoctoproject.org with patches created using this process. You can configure git-send-email to automatically use this address for the meta-arm repository with the following git command:
-
-$ git config --local --add sendemail.to meta-arm@lists.yoctoproject.org
-
-Commits and patches added should follow the OpenEmbedded patch guidelines:
-
-https://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines
-
-The component being changed in the shortlog should be prefixed with the layer name (without the meta- prefix), for example:
-
-  arm-bsp/trusted-firmware-a: decrease frobbing level
-
-  arm-toolchain/gcc: enable foobar v2
+E-mail meta-arm@lists.yoctoproject.org with patches created using this process

 Reporting bugs
 --------------
 E-mail meta-arm@lists.yoctoproject.org with the error encountered and the steps
-to reproduce the issue.
+to reproduce the issue
+

 Maintainer(s)
 -------------
 * Jon Mason <jon.mason@arm.com>
-* Ross Burton <ross.burton@arm.com>
@@ -3,4 +3,4 @@ header:
  includes:
    - base.yml

-machine: sgi575
+machine: a5ds
@@ -2,5 +2,5 @@ header:
  version: 9

 local_conf_header:
-  cc: |
-    GCCVERSION = "arm-10.3"
+  libc: |
+    GCCVERSION = "arm-9.2"
@@ -5,7 +5,7 @@ distro: poky

 defaults:
  repos:
-    refspec: honister
+    refspec: dunfell

 repos:
  meta-arm:
@@ -20,31 +20,29 @@ repos:
      meta:
      meta-poky:

+  meta-openembedded:
+    url: https://git.openembedded.org/meta-openembedded
+    layers:
+      meta-oe:
+
 env:
  BB_LOGCONFIG: ""
-  TOOLCHAIN_DIR: ""

 local_conf_header:
  base: |
-    CONF_VERSION = "2"
+    CONF_VERSION = "1"
    PACKAGE_CLASSES = "package_ipk"
-    LICENSE_FLAGS_WHITELIST += "armcompiler Arm-FVP-EULA"
-    PACKAGECONFIG:remove:pn-qemu-system-native = "gtk+ sdl"
-    EXTRA_IMAGE_FEATURES:append = " debug-tweaks"
+    LICENSE_FLAGS_WHITELIST += "armcompiler"
+    PACKAGECONFIG_remove_pn-qemu-system-native = "gtk+ sdl"
+    EXTRA_IMAGE_FEATURES_append = " debug-tweaks"
    BB_NUMBER_THREADS = "16"
    PARALLEL_MAKE = "-j16"
    INHERIT += "rm_work"
-    PACKAGECONFIG:append:pn-perf = " coresight"
-  noptest: |
-    DISTRO_FEATURES:remove = "ptest"
-  sstate_mirror: |
-    BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687"
-    BB_HASHSERVE = "auto"
-    BB_SIGNATURE_HANDLER = "OEEquivHash"
-    SSTATE_MIRRORS = "file://.* http://sstate.yoctoproject.org/dev/PATH;downloadfilename=PATH"
+  ptest: |
+    DISTRO_FEATURES_remove = "ptest"

 machine: unset

 target:
  - core-image-base
-  - perf
+#  - perf
@@ -1,44 +0,0 @@
-#! /usr/bin/env python3
-
-import argparse
-import pathlib
-import re
-import subprocess
-import sys
-
-import yaml
-
-if __name__ == "__main__":
-    parser = argparse.ArgumentParser()
-    parser.add_argument("config", type=argparse.FileType())
-    parser.add_argument("metaarm", type=pathlib.Path, help="Path to meta-arm")
-    parser.add_argument("others", type=pathlib.Path, help="Path to parent of dependencies")
-    args = parser.parse_args()
-
-    config = yaml.safe_load(args.config)
-    layers = config["layers"]
-    dependencies = config["dependencies"]
-
-    found_layers = [p for p in args.metaarm.glob("meta-*") if p.is_dir()]
-    print(f"Testing {len(layers)} layers: {', '.join(layers)}.")
-    print(f"Found {len(found_layers)} layers in meta-arm.")
-    print()
-
-    cli = ["yocto-check-layer-wrapper",]
-    cli.extend([args.metaarm / layer for layer in layers])
-    cli.append("--dependency")
-    cli.extend([args.others / layer for layer in dependencies])
-    cli.append("--no-auto-dependency")
-
-    passed = 0
-    process = subprocess.Popen(cli, stdout=subprocess.PIPE, stderr=subprocess.STDOUT, universal_newlines=True)
-    while True:
-        line = process.stdout.readline()
-        if process.poll() is not None:
-            break
-        print(line.strip())
-        if re.search(r"meta-.+ PASS", line):
-            passed += 1
-
-    print(f"Coverage: {int(passed / len(found_layers) * 100)}%")
-    sys.exit(process.returncode)
@@ -1,13 +0,0 @@
-layers:
-  - meta-arm
-  - meta-arm-bsp
-  - meta-arm-toolchain
-  - meta-gem5
-  - meta-arm-autonomy
-dependencies:
-  - meta-openembedded/meta-oe
-  - meta-openembedded/meta-networking
-  - meta-openembedded/meta-python
-  - meta-openembedded/meta-filesystems
-  - poky/meta-poky
-  - meta-virtualization
@@ -2,7 +2,6 @@

 from pathlib import Path
 import sys
-from listmachines import list_machines

 metaarm = Path.cwd()

@@ -10,16 +9,15 @@ if metaarm.name != "meta-arm":
    print("Not running inside meta-arm")
    sys.exit(1)

-# Find all layers
-layers = (p.name for p in metaarm.glob("meta-*") if p.is_dir())
 # All machine configurations
-machines = list_machines(layers)
+machines = metaarm.glob("meta-*/conf/machine/*.conf")
+machines = set(p.stem for p in machines)

-# All kas files
-kas = metaarm.glob("ci/*.yml")
-kas = set(p.stem for p in kas)
+# All ci files
+ci = metaarm.glob("ci/*.yml")
+ci = set(p.stem for p in ci)

-missing = machines - kas
+missing = machines - ci
 print(f"The following machines are missing: {', '.join(sorted(missing))}.")

 covered = len(machines) - len(missing)
@@ -7,8 +7,7 @@ set -e -u

 LOGFILE=$1

-LINES=$(grep --invert-match "attempting MIRRORS if available" $LOGFILE | wc -l)
-if test "$LINES" -ne 0; then
+if test -s $LOGFILE; then
    echo ==============================
    echo The build had warnings/errors:
    echo ==============================
@@ -1,10 +0,0 @@
-header:
-  version: 9
-
-target:
-  - binutils-cross-aarch64
-  - clang-cross-aarch64
-  - clang-native
-  - python3-native
-  - opkg-native
-  - rpm-native
@@ -4,7 +4,6 @@ header:
 repos:
  meta-clang:
    url: https://github.com/kraj/meta-clang
-    refspec: master

 local_conf_header:
  clang: |
@@ -1,10 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-
-machine: corstone700-fvp
-
-local_conf_header:
-  image: |
-    CORE_IMAGE_EXTRA_INSTALL = "corstone700-test-app"
@@ -1,6 +0,0 @@
-header:
-  version: 9
-  includes:
-    - corstone700-fvp.yml
-
-machine: corstone700-mps3
@@ -1,8 +0,0 @@
-header:
-  version: 9
-
-local_conf_header:
-  cc: |
-    PNBLACKLIST[gcc-cross-arm] = "Using external toolchain"
-    TCMODE = "external-arm"
-    EXTERNAL_TOOLCHAIN = "${TOPDIR}/toolchains/${TARGET_ARCH}"
@@ -3,4 +3,4 @@ header:
  includes:
    - base.yml

-machine: corstone500
+machine: foundation-armv8
@@ -1,6 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-
-machine: fvp-base-arm32
@@ -5,12 +5,3 @@ header:

 machine: fvp-base

-local_conf_header:
-  testimagefvp: |
-    INHERIT = "fvpboot"
-    # This fails but we can't add to the ignorelist from meta-arm yet
-    # https://bugzilla.yoctoproject.org/show_bug.cgi?id=14604
-    TEST_SUITES:remove = "parselogs"
-    # Tell testimage to connect to localhost:8022, and forward that to SSH in the FVP.
-    TEST_TARGET_IP = "localhost:8022"
-    FVP_CONFIG[bp.virtio_net.hostbridge.userNetPorts] ?= "8022=22"
@@ -1,7 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-
-machine: fvp-baser-aemv8r64
-
@@ -1,20 +0,0 @@
-# Simple target to build the FVPs that are publically available
-
-header:
-  version: 9
-  includes:
-    - base.yml
-
-machine: qemuarm64
-
-local_conf_header:
-  sdk: |
-    SDKMACHINE = "x86_64"
-
-target:
-  - nativesdk-fvp-base-a-aem
-  - nativesdk-fvp-n1-edge
-  - nativesdk-fvp-sgi575
-  - nativesdk-fvp-corstone500
-  - nativesdk-fvp-corstone700
-  - nativesdk-fvp-tc0
@@ -2,16 +2,9 @@ header:
  version: 9
  includes:
    - base.yml
-    - meta-openembedded.yml
-
-repos:
-  meta-arm:
-    layers:
-      meta-gem5:

 machine: gem5-arm64

 target:
  - core-image-minimal
-  - perf
  - gem5-aarch64-native
@@ -1,15 +0,0 @@
-header:
-  version: 9
-  includes:
-    - gem5-arm64.yml
-
-repos:
-  meta-arm:
-    layers:
-      meta-atp:
-
-machine: gem5-atp-arm64
-
-target:
-  - atp-native
-  - core-image-minimal
@@ -1,6 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-
-machine: generic-arm64
@@ -1,46 +0,0 @@
-#!/bin/bash
-set -u
-
-HOST_ARCH=$(uname -m)
-VER="10.3-2021.07"
-
-DOWNLOAD_DIR=$1
-TOOLCHAIN_DIR=$2
-TOOLCHAIN_LINK_DIR=$3
-
-# These should be already created by .gitlab-ci.yml, but do here if run outside of that env
-mkdir -p $DOWNLOAD_DIR $TOOLCHAIN_DIR $TOOLCHAIN_LINK_DIR
-
-if [ $HOST_ARCH = "aarch64" ]; then
-	#AArch64 Linux hosted cross compilers
-
-	#AArch32 target with hard float (arm-none-linux-gnueabihf)
-	wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
-elif [ $HOST_ARCH = "x86_64" ]; then
-	#x86_64 Linux hosted cross compilers
-
-	#AArch32 target with hard float (arm-linux-none-gnueabihf)
-	wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
-
-	#AArch64 GNU/Linux target (aarch64-none-linux-gnu)
-	wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
-
-	#AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
-	wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
-else
-	echo "ERROR - Unknown build arch of $HOST_ARCH"
-	exit 1
-fi
-
-for i in arm aarch64 aarch64_be; do
-	if [ ! -d $TOOLCHAIN_DIR/gcc-arm-$VER-$HOST_ARCH-$i-none-linux-gnu*/ ]; then
-		if [ ! -f $DOWNLOAD_DIR/gcc-arm-$VER-$HOST_ARCH-$i-none-linux-gnu*.tar.xz ]; then
-			continue
-		fi
-
-		tar -C $TOOLCHAIN_DIR -axvf $DOWNLOAD_DIR/gcc-arm-$VER-$HOST_ARCH-$i-none-linux-gnu*.tar.xz
-	fi
-
-	# Setup a link for the toolchain to use local to the building machine (e.g., not in a shared location)
-	ln -s $TOOLCHAIN_DIR/gcc-arm-$VER-$HOST_ARCH-$i-none-linux-gnu* $TOOLCHAIN_LINK_DIR/$i
-done
@@ -1,29 +0,0 @@
-#! /usr/bin/env python3
-
-import pathlib
-import typing
-import sys
-
-"""
-List all of the machines available under the listed sub-layers of meta-arm.
-"""
-def list_machines(layers: typing.Sequence[str]) -> typing.Set[str]:
-    machines = set()
-
-    # We know we're in meta-arm/scripts, so find the top-level directory
-    metaarm = pathlib.Path(__file__).resolve().parent.parent
-    if metaarm.name != "meta-arm":
-        raise Exception("Not running inside meta-arm")
-    
-    for layer in layers:
-        machines |= set(p.stem for p in (metaarm / layer / "conf" / "machine").glob("*.conf"))
-    return machines
-
-if __name__ == "__main__":
-    if len(sys.argv) > 1:
-        machines = list_machines(sys.argv[1:])
-        print(" ".join(sorted(machines)))
-        sys.exit(0)
-    else:
-        print("Usage:\n$ %s [layer name ...] " % sys.argv[0])
-        sys.exit(1)
@@ -1,10 +0,0 @@
-header:
-  version: 9
-  includes:
-    - meta-openembedded.yml
-    - meta-virtualization.yml
-
-repos:
-  meta-arm:
-    layers:
-      meta-arm-autonomy:
@@ -1,11 +0,0 @@
-header:
-  version: 9
-
-repos:
-  meta-openembedded:
-    url: https://git.openembedded.org/meta-openembedded
-    layers:
-      meta-filesystems:
-      meta-networking:
-      meta-oe:
-      meta-python:
@@ -1,8 +0,0 @@
-header:
-  version: 9
-  includes:
-    - meta-openembedded.yml
-
-repos:
-  meta-virtualization:
-    url: git://git.yoctoproject.org/meta-virtualization
@@ -1,9 +0,0 @@
-header:
-  version: 9
-  includes:
-    - meta-openembedded.yml
-
-repos:
-  meta-zephyr:
-    url: https://git.yoctoproject.org/git/meta-zephyr
-    refspec: master
@@ -1,16 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-    - meta-zephyr.yml
-
-local_conf_header:
-  nonbuilding_tests: |
-    ZEPHYRTESTS:remove = "common"
-  failing_tests: |
-    ZEPHYRTESTS:remove = "context early_sleep sleep"
-
-machine: microbit-v1
-
-target:
-  - zephyr-kernel-test-all
@@ -1,11 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-    - meta-zephyr.yml
-
-machine: musca-b1
-
-target:
-  - trusted-firmware-m
-  - zephyr-philosophers
@@ -1,10 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-    - meta-openembedded.yml
-
-machine: musca-s1
-
-target:
-  - trusted-firmware-m
@@ -1,14 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-    - meta-zephyr.yml
-
-local_conf_header:
-  nonbuilding_tests: |
-    ZEPHYRTESTS:remove += "common device poll queue sleep"
-
-machine: qemu-cortex-a53
-
-target:
-  - zephyr-kernel-test-all
@@ -1,16 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-    - meta-zephyr.yml
-
-local_conf_header:
-  tclibc: |
-    TCLIBC = "newlib"
-  nonbuilding_tests: |
-    ZEPHYRTESTS:remove = "common context pending poll sleep"
-
-machine: qemu-cortex-m3
-
-target:
-  - zephyr-kernel-test-all
@@ -1,10 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-    - meta-zephyr.yml
-
-machine: qemu-cortex-r5
-
-target:
-  - zephyr-philosophers
@@ -1,11 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-
-machine: qemuarm64-sbsa
-
-target:
-  - core-image-base
-  - perf
-  - sbsa-acs
@@ -1,16 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-
-machine: qemuarm64-secureboot
-
-local_conf_header:
-  bugs: |
-    # Only ping until errors can be resolved
-    TEST_SUITES = "ping"
-
-target:
-  - core-image-base
-  - perf
-  - optee-examples
@@ -1,6 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-
-machine: qemuarm64
@@ -4,3 +4,8 @@ header:
    - base.yml

 machine: qemuarmv5
+
+local_conf_header:
+  bugs: |
+    # Remove parselogs until errors can be resolved
+    TEST_SUITES_remove = "parselogs"
@@ -4,7 +4,3 @@ header:
    - base.yml

 machine: tc0
-
-target:
-  - tc-artifacts-image
-  - perf
@@ -1,10 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-
-machine: tc1
-
-target:
-  - tc-artifacts-image
-  - perf
@@ -1,8 +0,0 @@
-header:
-  version: 9
-
-local_conf_header:
-  testimage: |
-    IMAGE_CLASSES += "testimage"
-    TEST_TARGET = "QemuTargetZephyr"
-    TEST_SUITES = "zephyr"
@@ -10,7 +10,7 @@ local_conf_header:
    TEST_SERVER_IP = "127.0.0.1"
    QEMU_USE_SLIRP = "1"
  packages: |
-    IMAGE_FEATURES:append = " ssh-server-dropbear"
+    IMAGE_FEATURES_append = " ssh-server-dropbear"

 # Multiple targets are available, put it down to just one
 target:
@@ -1,20 +0,0 @@
-header:
-  version: 9
-  includes:
-    - base.yml
-
-# Target is arm64 and SDK is x86-64 to ensure that we exercise both
-# architectures
-
-machine: qemuarm64
-local_conf_header:
-  toolchains: |
-    SDKMACHINE = "x86_64"
-
-# No target armcompiler as currently there is no arm64 build
-target:
-  - nativesdk-armcompiler
-  - gcc-aarch64-none-elf
-  - nativesdk-gcc-aarch64-none-elf
-  - gcc-arm-none-eabi
-  - nativesdk-gcc-arm-none-eabi
@@ -36,8 +36,6 @@ if __name__ == "__main__":
    for repo in repositories:
        repodir = base_repodir / repo_shortname(repo)
        if repodir.exists():
-            print("Updating %s..." % repo)
            subprocess.run(["git", "-C", repodir, "fetch"], check=True)
        else:
-            print("Cloning %s..." % repo)
            subprocess.run(["git", "clone", "--bare", repo, repodir], check=True)
@@ -1,11 +0,0 @@
-header:
-  version: 9
-  includes:
-    - meta-virtualization.yml
-
-local_conf_header:
-  meta-virt: |
-    DISTRO_FEATURES:append = " virtualization xen"
-
-target:
-  - xen-image-minimal
@@ -1,41 +0,0 @@
-header:
-  version: 9
-
-distro: poky
-machine: fvp-baser-aemv8r64
-
-defaults:
-  repos:
-    refspec: honister
-
-repos:
-  meta-arm:
-    url: https://git.yoctoproject.org/git/meta-arm
-    path: layers/meta-arm
-    layers:
-      meta-arm:
-      meta-arm-bsp:
-      meta-arm-toolchain:
-
-  poky:
-    url: https://git.yoctoproject.org/git/poky
-    path: layers/poky
-    layers:
-      meta:
-      meta-poky:
-
-env:
-  FVP_BASE_R_AEM_TARBALL_URI: ""
-  FVP_BASE_R_ARM_EULA_ACCEPT: "False"
-
-local_conf_header:
-  base: |
-    CONF_VERSION = "2"
-    PACKAGE_CLASSES = "package_ipk"
-    PACKAGECONFIG:remove:pn-qemu-system-native = "gtk+ sdl"
-    EXTRA_IMAGE_FEATURES:append = " debug-tweaks"
-    IMAGE_CLASSES:append = " ${@oe.utils.ifelse(d.getVar('FVP_BASE_R_AEM_TARBALL_URI'), 'fvpboot', '')}"
-    LICENSE_FLAGS_WHITELIST:append = " ${@oe.utils.vartrue('FVP_BASE_R_ARM_EULA_ACCEPT', 'Arm-FVP-EULA', '', d)}"
-
-target:
-  - core-image-minimal
@@ -1,8 +0,0 @@
-header:
-  version: 9
-  includes:
-    - fvp-baser-aemv8r64-bsp.yml
-
-local_conf_header:
-  base-rt: |
-    PREFERRED_PROVIDER_virtual/kernel = "linux-yocto-rt"
@@ -4,8 +4,8 @@ meta-arm-autonomy Yocto Layer
 Introduction
 ------------
 This layer provides an hypervisor based solution (currently based on Xen) for
-autonomous system. It contains recipes and classes to build host and guest
-images.
+autonomous system. It contains recipes and classes to build host and guests
+systems.

 To start using this layer, please check the
 [Quick Start Guide](documentation/arm-autonomy-quickstart.md).
@@ -16,14 +16,13 @@ This layer depends on several other Yocto layers:
 * meta-openembedded (https://git.openembedded.org/meta-openembedded)
 * poky (https://git.yoctoproject.org/poky)
 * meta-virtualization (https://git.yoctoproject.org/meta-virtualization)
-* meta-networking (git://git.openembedded.org/meta-openembedded)

 Distribution Features
 ---------------------
-This layer adds the following Yocto DISTRO_FEATURES:
+This layer is adding the following Yocto DISTRO_FEATURES:

 * arm-autonomy-host: this feature activates functionalities required to build
-  an autonomy host system. It has the following effects:
+  an autonomy host system. It is doing the following:
  - add 'xen' and 'ipv4' to DISTRO_FEATURES.
  - add xen backend drivers to linux kernel configuration.
  - To reduce the root filesystem image size the kernel image is not installed.
@@ -44,40 +43,40 @@ its documentation.
 Those documentation files should be checked for variables:
 - [xen-devicetree](documentation/xen-devicetree.md)
 - [xenguest-manager](documentation/xenguest-manager.md)
- [xenguest-network](documentation/xenguest-network.md)
+- [xenguest-network-bridge](documentation/xenguest-network-bridge.md)

 BSPs
 ----
-This layer adds the following machine:
+This layer is adding the following machines:

-* arm64-autonomy-guest: This machine creates a minimal BSP suitable to be used
+* arm64-autonomy-guest: this machines creates a minimal BSP suitable to be used
  as an autonomy guest. It is in fact only activating ARM64 architecture and
  SMP in the linux kernel and is enabling the DISTRO_FEATURE
-  'arm-autonomy-guest'.
+  arm-autonomy-guest.

 Images
 ------
 This layer is adding the following images:

-* arm-autonomy-host-image-minimal: This image includes all elements required
-  to create a minimal arm-autonomy-host system. This includes xen, and tools to
-  manage xen guests and xenguest images. This image depends on
- 'arm-autonomy-host' distribution feature.
+* arm-autonomy-host-image-minimal: this image includes all elements required
+  to create a minimal arm-autonomy-host system. This includes xen and tools to
+  manage xen guests. This image depends on 'arm-autonomy-host' distribution
+  feature.

 Recipes and classes
 -------------------
-This layer adds the following recipes and classes:
+This layer is adding the following recipes and classes:

-* [xen-devicetree](documentation/xen-devicetree.md): This is a recipe to modify
+* [xen-devicetree](documentation/xen-devicetree.md): this is a recipe to modify
  a device tree blob to add information required to boot xen and a Dom0 linux.

-* [xenguest-mkimage](documentation/xenguest-mkimage.md): This is a tool used to
+* [xenguest-mkimage](documentation/xenguest-mkimage.md): this is a tool to
  create and modify images to be used as Xen guests.

-* [xenguest-manager](documentation/xenguest-manager.md): This is a tool used to
+* [xenguest-manager](documentation/xenguest-manager.md): this is a tool to
  create/remove/start/stop xen guest generated using xenguest-mkimage.

-* [xenguest-network](documentation/xenguest-network.md): This
+* [xenguest-network-bridge](documentation/xenguest-network-bridge.md): this
  recipe add tools and init scripts to create a bridge connected to the
  external network on the host and allow guests to be connected to it.

@@ -89,5 +88,5 @@ would like to contribute, please contact the maintainers

 Maintainer(s)
 -------------
-* Diego Sueiro <diego.sueiro@arm.com>
 * Bertrand Marquis <bertrand.marquis@arm.com>
+* Filipe Rinaldi <filipe.rinaldi@arm.com>
@@ -1,26 +0,0 @@
-# This class is to be inherited by image recipes that want to build and install
-# an alternate kernel (set via PREFERRED_PROVIDER_alternate/kernel).
-#
-# It is mandatory to also set the KERNEL_PACKAGE_NAME for the alternate kernel
-# recipe via KERNEL_PACKAGE_NAME:pn-${PREFERRED_PROVIDER_alternate/kernel} and
-# its value needs to be different from "kernel" since this is the default set
-# for PREFERRED_PROVIDER_virtual/kernel.
-#
-# An example of these settings can be found at meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/n1sdp-extra-settings.inc
-#
-# When building and installing an alternate kernel, the kernel-modules packages
-# for both virtual/kernel and alternate/kernel will be installed.
-
-PREFERRED_PROVIDER_alternate/kernel ??= ""
-
-python () {
-    alternate_kernel = d.getVar('PREFERRED_PROVIDER_alternate/kernel')
-    if alternate_kernel:
-        alternate_kernel_pkg_name = d.getVar('KERNEL_PACKAGE_NAME:pn-%s' % alternate_kernel)
-        if alternate_kernel_pkg_name:
-            d.appendVar('EXTRA_IMAGEDEPENDS', ' ' + alternate_kernel)
-            d.appendVar('IMAGE_INSTALL', ' kernel-modules')
-            d.appendVar('IMAGE_INSTALL', ' ' + alternate_kernel_pkg_name + '-modules')
-        else:
-            raise bb.parse.SkipRecipe("No KERNEL_PACKAGE_NAME:pn-%s set" % alternate_kernel )
-}
@@ -1,115 +0,0 @@
-# Docker Extern Containers
-#
-# This class allows docker image tarballs to be installed in the rootfs
-#
-# The images can be selected using the variable CONTAINER_IMAGE_FILES which
-# should contain a space seperated list of absolute paths or yocto urls for
-# docker images that have been exported using docker export:
-# - https://docs.docker.com/engine/reference/commandline/export/
-#
-# src_uri_parse_var.bbclass is used to parse CONTAINER_IMAGE_FILES
-#
-# There are 4 supported formats for CONTAINER_IMAGE_FILES entries:
-#
-# - http/https url
-#   - CONTAINER_IMAGE_FILES = "https://[url]:[port]/alpine.tar;md5sum=..."
-#
-# - file:// absolute local path from root
-#   - CONTAINER_IMAGE_FILES = "file:///containers/alpine2.tar"
-#
-# - file:// path relative to FILESEXTRAPATHS
-#   - CONTAINER_IMAGE_FILES = "file://foo/alpine3.tar"
-#     FILESEXTRAPATHS .= "/containers:"
-#
-# - plain absolute local path from root
-#   - CONTAINER_IMAGE_FILES = "/containers/foo/bar/alpine4.tar"
-#
-# It is not recommended to use other yocto URL types, as they may result in
-# undefined behaviour.
-#
-# A semicolon seperated list of install arguments can follow each image path:
-# - conname : the name that will be attached when the image is imported
-#             (default: [filename, without extension])
-# - contag  : the tag that will be attached when the image is imported
-#             (default: local)
-# - conkeep : Flag for whether the exported container image file should be
-#             kept once the import has been completed
-#             (default: 0)
-#
-# Any other arguments, for example an md5sum, will be assumed to be fetch
-# arguments, and will be kept when the path is added to the SRC_URI
-#
-# e.g.  CONTAINER_IMAGE_FILES = "\
-# https://[url]:[port]/alpine.tar;md5sum=[checksum];conkeep=1 \
-# file:///containers/alpine2.tar;contag=latest;conname=docker2 \
-# file://foo/alpine3.tar \
-# /containers/foo/bar/alpine4.tar;contag=1.0;conkeep=1 "
-#
-# Resulting Manifest:
-# ARCHIVE     NAME    TAG    KEEP
-# alpine.tar  alpine  local  1
-# alpine2.tar docker2 latest 0
-# alpine3.tar alpine3 local  0
-# alpine4.tar alpine4 1.0    1
-#
-# Other configurable variables:
-# CONTAINERS_INSTALL_DIR  : The folder underneath ${WORKDIR} where the docker
-#                           images will be stored
-#                           (default: "/usr/share/docker/images")
-# CONTAINERS_MANIFEST     : The name of the manifest file containing image
-#                           parameters, also stored in CONTAINERS_INSTALL_DIR
-#                           (default: "containers.manifest")
-# CONTAINERS_TAG_DEFAULT  : Use this to change the value that will be used as
-#                           contag if no value is provided
-#                           (default: "local")
-# CONTAINERS_KEEP_DEFAULT : Use this to change the value that will be used for
-#                           conkeep if no value is provided
-#                           (default: "0")
-#
-
-inherit features_check
-
-REQUIRED_DISTRO_FEATURES = "docker"
-
-RDEPENDS:${PN} = "packagegroup-docker-runtime-minimal"
-
-CONTAINER_IMAGE_FILES ??= ""
-CONTAINERS_INSTALL_DIR ??= "${datadir}/docker/images"
-CONTAINERS_MANIFEST ??= "containers.manifest"
-CONTAINERS_TAG_DEFAULT ??= "local"
-CONTAINERS_KEEP_DEFAULT ??= "0"
-
-inherit set_src_uri_from_var
-
-SRC_URI_FROM_VAR_NAME = "CONTAINER_IMAGE_FILES"
-# Define installation params
-SRC_URI_FROM_VAR_MANIFEST_PARAMS = "conname=[basename] \
-contag=${CONTAINERS_TAG_DEFAULT} conkeep=${CONTAINERS_KEEP_DEFAULT}"
-
-SRC_URI_FROM_VAR_UNPACK_DIR = "containers"
-
-# Read manifest and install container images
-do_install() {
-    local archive name tag keep
-
-    if [ -f "${WORKDIR}/${SRC_URI_FROM_VAR_UNPACK_DIR}/manifest" ]; then
-
-        install -d "${D}${CONTAINERS_INSTALL_DIR}"
-        install -m 644 \
-            "${WORKDIR}/${SRC_URI_FROM_VAR_UNPACK_DIR}/manifest" \
-            "${D}${CONTAINERS_INSTALL_DIR}/${CONTAINERS_MANIFEST}"
-
-        while read -r archive name tag keep _; do
-            [ -f "${WORKDIR}/${SRC_URI_FROM_VAR_UNPACK_DIR}/${archive}" ] ||
-                bbfatal "${archive} does not exist"
-
-            install -m 644 \
-                "${WORKDIR}/${SRC_URI_FROM_VAR_UNPACK_DIR}/${archive}" \
-                "${D}${CONTAINERS_INSTALL_DIR}/${archive}"
-        done < "${D}${CONTAINERS_INSTALL_DIR}/${CONTAINERS_MANIFEST}"
-    fi
-}
-
-do_install[vardeps] += "CONTAINER_IMAGE_FILES"
-
-FILES:${PN} += "${CONTAINERS_INSTALL_DIR}"
@@ -1,7 +1,7 @@
 # Create a xenguest image with kernel and filesystem produced by Yocto
 # This will create a .xenguest file that the xenguest-manager can use.

-inherit xenguest_image
+inherit xenguest-image

 # We are creating our guest in a local subdirectory
 # force the value so that we are not impacted if the user is changing it
@@ -22,7 +22,7 @@ xenguest_image_add_kernel() {
 # Add rootfs file to the image
 xenguest_image_add_rootfs() {
    call_xenguest_mkimage partial \
-        --disk-add-file=${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.${IMAGE_TYPEDEP:xenguest}:rootfs.${IMAGE_TYPEDEP:xenguest}
+        --disk-add-file=${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.${IMAGE_TYPEDEP_xenguest}:rootfs.${IMAGE_TYPEDEP_xenguest}
 }

 # Pack xenguest image
@@ -57,73 +57,12 @@ do_bootimg_xenguest[depends] += "xenguest-base-image:do_deploy"
 do_bootimg_xenguest[depends] += "${PN}:do_rootfs"

 # This set in python anonymous after, just set a default value here
-IMAGE_TYPEDEP:xenguest ?= "tar"
+IMAGE_TYPEDEP_xenguest ?= "tar"

 # We must not be built at rootfs build time because we need the kernel
 IMAGE_TYPES_MASKED += "xenguest"
 IMAGE_TYPES += "xenguest"

-XENGUEST_IMAGE_RECIPE = "${PN}"
-XENGUEST_IMAGE_VARS += "XENGUEST_IMAGE_RECIPE"
-
-# Merge intermediate env files from all recipes into a single file
-python do_merge_xenguestenv () {
-
-    import re
-
-    # Open final merged file in DEPLOY_DIR_IMAGE for writing, or create
-    outdir = d.getVar('DEPLOY_DIR_IMAGE')
-    with open(os.path.join(outdir,'xenguest.env'), 'w') as merged_file:
-
-        # Adds vars from xenguest_image to list
-        merged_env = []
-        xenguest_vars = d.getVar('XENGUEST_IMAGE_VARS')
-        for var in xenguest_vars.split():
-            value = d.getVar(var)
-            if value:
-                merged_env.append(var + "=" + " ".join(value.split()) + "\n")
-
-        # Resolve dependencies for this task to find names of intermediate
-        # .xenguestenv files
-        taskdepdata = d.getVar('BB_TASKDEPDATA')
-        task_mc = d.getVar('BB_CURRENT_MC')
-        task_file = d.getVar('FILE')
-
-        # See runqueue.py function build_taskdepdata
-        DEPS_INDEX = 3
-
-        depdata_key = task_file + ":do_merge_xenguestenv"
-
-        # If in a multiconfig, need to add that to the key
-        if task_mc != "default":
-            depdata_key = "mc:" + task_mc + ":" + depdata_key
-
-        # Retrieve filename using regex
-        get_filename = re.compile(r'/([^/]+\.bb):do_deploy_xenguestenv$')
-        env_dir = d.getVar('XENGUEST_ENV_STAGING_DIR')
-
-        for task_dep in taskdepdata[depdata_key][DEPS_INDEX]:
-            if task_dep.endswith(":do_deploy_xenguestenv"):
-                filename = re.search(get_filename, task_dep).group(1) + ".xenguestenv"
-                bb.note("Merging: " + filename)
-                try:
-                    with open(env_dir + "/" + filename, 'r') as f:
-                        # Eliminate duplicates
-                        merged_env = list(set(merged_env + f.readlines()))
-                except (FileNotFoundError, IOError):
-                    bb.note(" " + filename + " has no extra vars")
-
-        # Sort Alphabetically and write
-        merged_env.sort()
-        merged_file.write("".join(merged_env))
-}
-do_merge_xenguestenv[dirs] = "${DEPLOY_DIR_IMAGE}"
-do_merge_xenguestenv[vardeps] += "${XENGUEST_IMAGE_VARS}"
-do_merge_xenguestenv[vardepsexclude] += "BB_TASKDEPDATA"
-do_merge_xenguestenv[recrdeptask] += "do_deploy_xenguestenv"
-
-addtask merge_xenguestenv before do_populate_lic_deploy after do_image_complete
-
 python __anonymous() {
    # Do not do anything if we are not in the want FSTYPES
    if bb.utils.contains_any('IMAGE_FSTYPES', 'xenguest', '1', '0', d):
@@ -158,7 +97,7 @@ python __anonymous() {
            # do_bootimg_xenguest will need the tar file
            d.appendVarFlag('do_bootimg_xenguest', 'depends', ' %s:do_image_tar' % (d.getVar('PN')))
            # set our TYPEDEP to the proper compression
-            d.setVar('IMAGE_TYPEDEP:xenguest', 'tar' + (rootfs_file.split('.tar', 1)[1] or ''))
+            d.setVar('IMAGE_TYPEDEP_xenguest', 'tar' + (rootfs_file.split('.tar', 1)[1] or ''))

        if kernel_needed:
            # Tell do_bootimg_xenguest to call xenguest_image_add_kernel
@@ -3,10 +3,7 @@
 # This is done using kernel-fitimage as model
 # To activate this, kernel-xenguest must be added to KERNEL_CLASSES

-# Add a variable name to XENGUEST_IMAGE_VARS_EXTRA if you want it to
-# appear in xenguest.env when the image is deployed
-
-inherit xenguest_image
+inherit xenguest-image

 # use a local copy to pack all together
 XENGUEST_IMAGE_DEPLOY_DIR = "${WORKDIR}/tmp-xenguest"
@@ -27,9 +24,9 @@ do_assemble_xenguest_initramfs() {
    rm -f ${B}/${KERNEL_OUTPUT_DIR}/Image-initramfs.xenguest
    call_xenguest_mkimage pack ${B}/${KERNEL_OUTPUT_DIR}/Image-initramfs.xenguest
 }
-do_assemble_xenguest_initramfs[depends] += "${INITRAMFS_IMAGE}:do_merge_xenguestenv"
+do_assemble_xenguest_initramfs[depends] += "${INITRAMFS_IMAGE}:do_image_complete"

-kernel_do_deploy:append() {
+kernel_do_deploy_append() {
    if [ -f "${B}/${KERNEL_OUTPUT_DIR}/Image-initramfs.xenguest" ]; then
        install -m 0644 ${B}/${KERNEL_OUTPUT_DIR}/Image-initramfs.xenguest "$deployDir/Image-${INITRAMFS_NAME}.xenguest"
        ln -snf Image-${INITRAMFS_NAME}.xenguest $deployDir/Image-${INITRAMFS_LINK_NAME}.xenguest
@@ -1,224 +0,0 @@
-# Set SRC_URI from Variable
-
-# This class parses a variable named in SRC_URI_FROM_VAR_NAME for entries that
-# should be added to the SRC_URI
-#
-# There are 4 supported formats for entries:
-#
-# - http/https url
-#   - Note that a checksum (md5sum or sha256sum) must be provided for http(s)
-#
-# - file:// absolute local path from root
-#   - In this case the filename will be added to SRC_URI and the path from '/'
-#   added to FILESEXTRAPATHS
-#
-# - file:// path relative to FILESEXTRAPATHS
-#   - In this case the filename will be added to SRC_URI and the preceding path
-#   added to FILESOVERRIDES, so that the full path to the file will
-#   be available in FILESPATH when it is generated by combining
-#   FILESEXTRAPATHS and FILESOVERRIDES.
-#
-# - plain absolute local path from root
-#   - This will be treated the same as an file:// path from root. Plain paths
-#   must be absolute, and cannot be relative to FILESEXTRAPATHS
-#
-# It is not recommended to use other yocto URL types, as they may result in
-# undefined behaviour.
-#
-# These entries will be added to the SRC_URI so that the yocto fetcher can
-# unpack a copy into ${WORKDIR}/${SRC_URI_FROM_VAR_UNPACK_DIR}
-#
-#
-# A list of arguments can follow each entry in the input variable, seperated
-# by semi-colons (;). Arguments may be FETCH arguments or MANIFEST arguments.
-#
-# FETCH arguments will be appended to the entry in SRC_URI, for example
-# "downloadfilename" to specify the filename used when storing a
-# downloaded file.
-# Each SRC_URI entry will automatically have the arguments
-# "unpack=0;subdir=${SRC_URI_FROM_VAR_UNPACK_DIR}" added to them, so do not
-# attempt to set these options.
-#
-# MANIFEST arguments are defined in the variable
-# SRC_URI_FROM_VAR_MANIFEST_PARAMS which should be a space seperated list of
-# names, each optionally followed by an equals sign (=) and a default value.
-#
-# The values provided for the manifest arguments will be written to the manifest
-# file in ${WORKDIR}/${SRC_URI_FROM_VAR_UNPACK_DIR} as columns, in the same
-# order as they appear in SRC_URI_FROM_VAR_MANIFEST_PARAMS.
-#
-# For entries that do not provide a value for a manifest argument, the default
-# value will be used if possible.
-# If no default is availale, omitting the parameter on any item will cause
-# an error.
-#
-# "[basename]" is a special case default that will set the value to
-# the filename without the path or file extension.
-#
-# e.g.
-# SRC_URI_FROM_VAR_MANIFEST_PARAMS="conname=[basename] contag=local conkeep"
-#
-# Any arguments that follow an entry in SRC_URI_FROM_VAR_NAME, that are not
-# named in SRC_URI_FROM_VAR_MANIFEST_PARAMS are assumed to be FETCH arguments,
-# so are added to the corresponding entry in the SRC_URI.
-
-SRC_URI_FROM_VAR_NAME ??= ""
-SRC_URI_FROM_VAR_MANIFEST_PARAMS ??= ""
-SRC_URI_FROM_VAR_UNPACK_DIR ??= "items"
-
-python __anonymous() {
-
-    parse_var = d.getVar('SRC_URI_FROM_VAR_NAME')
-
-    if not parse_var:
-        return
-
-    parse_var_items = d.getVar(parse_var)
-
-    if parse_var_items:
-        for item in parse_var_items.split(' '):
-            if not item:
-                continue
-
-            if item.startswith('/'):
-                # If not a Yocto URL, must be an absolute path
-                yocto_url = "file://" + item
-            else:
-                # Otherwise assume valid Yocto URL.
-                # Error case is caught later
-                yocto_url = item
-
-            fetcher = host = path = parm = None
-            try:
-                # Attempt to parse a Yocto URL
-                fetcher,host,path,_,_,parm = bb.fetch.decodeurl(yocto_url)
-            except:
-                # Something invalid is in the variable!
-                raise bb.parse.SkipRecipe(parse_var + \
-                                          " contains an invalid entry:\n'" + \
-                                          item + "'")
-
-            # This var is space seperated list of parameter names,
-            # with optional default value following an equals sign
-            # (name=default)
-            item_params_str = d.getVar('SRC_URI_FROM_VAR_MANIFEST_PARAMS')
-
-            # remove directories from path
-            filename = os.path.basename(path)
-
-            if "downloadfilename" in parm:
-                filename = parm["downloadfilename"]
-
-            item_manifest_args = {"filename": filename}
-
-            if item_params_str:
-                # required manifest arguments have been provided
-
-                # If no default is given add "=" for map parsing
-                item_params_list = [ arg + "=" if '=' not in arg
-                                     else arg
-                                     for arg in item_params_str.split(' ')
-                                   ]
-
-                # Generate key value pairs of argument names and
-                # default values
-                item_params_map = dict( (name.strip(), val.strip())
-                                        for name, val in (arg.split('=')
-                                        for arg in item_params_list)
-                                      )
-
-                for argname in item_params_map:
-                    # Iterate over required manifest arguments
-
-                    argvalue = parm.pop(argname, None)
-                    if argvalue:
-                        # a value has been provided for this item
-                        item_manifest_args[argname] = argvalue
-
-                    else:
-                        # No value provided, process default value
-                        default = item_params_map[argname]
-                        if default:
-                            # A default value is provided
-                            if default == "[basename]":
-                                # use the filename without extension
-                                default = os.path.splitext(filename)[0]
-
-                            # store default value in dict
-                            item_manifest_args[argname] = default
-
-                        else:
-                            # No default provided
-                            raise bb.fatal(parse_var + \
-                              " entry is missing a required parameter '" + \
-                              argname + "':\n'" + item + "'")
-
-            # Write value to var flags to ensure data structure is preserved
-            # Each entry of parse_var will have a varflag  where the value
-            # is a dictionary of argument names and values
-            d.setVarFlags(parse_var, {item: item_manifest_args})
-
-            src_uri_entry_suffix = ';'
-
-            # HTTP(S) fetcher must provide a checksum
-            if fetcher.startswith('http') and not \
-            ( 'md5sum' in parm or 'sha256sum' in parm ):
-                # Ensure http/https fetchers get a checksum
-                raise bb.parse.SkipRecipe(parse_var + \
-                                          " entry is missing a checksum:\n'" + \
-                                          item + "'")
-
-            # add remaining fetch parameters including checksum
-            for arg in parm:
-                src_uri_entry_suffix += ";" + arg + "=" + parm[arg]
-
-            # Add default and extra parameters to SRC_URI entry
-            src_uri_entry_suffix += ';unpack=0;subdir=' + \
-                                    d.getVar('SRC_URI_FROM_VAR_UNPACK_DIR')
-
-            if fetcher == 'file':
-                # Prevent local fetcher from re-creating dir structure
-                filedir = os.path.split(path)[0]
-                if filedir.startswith('/'):
-                    # Path is from the root
-                    d.appendVar('FILESEXTRAPATHS', filedir + ':')
-                else:
-                    # Path is relative to FILESEXTRAPATHS
-                    d.appendVar('FILESOVERRIDES', ':' + filedir)
-
-                # Add filename without path to SRC_URI
-                d.appendVar('SRC_URI', ' file://' + \
-                                        filename + src_uri_entry_suffix)
-            else:
-                # Add full entry to SRC_URI
-                d.appendVar('SRC_URI', ' ' + fetcher + \
-                            "://" + host + path + src_uri_entry_suffix)
-}
-
-python generate_manifest() {
-
-    parse_var = d.getVar('SRC_URI_FROM_VAR_NAME')
-
-    if not parse_var:
-        return
-
-    target_dir = os.path.join(d.getVar('WORKDIR'),
-                              d.getVar('SRC_URI_FROM_VAR_UNPACK_DIR'))
-
-    # Write a manifest file containing the parameters so SRC_URI
-    # doesn't need to be parsed by do_install
-    with open (target_dir + "/manifest", 'w') as manifest_file:
-        manifest_args = d.getVarFlags(parse_var)
-
-        parse_var_items = d.getVar(parse_var)
-
-        if parse_var_items:
-            for item in parse_var_items.split():
-
-                manifest_file.write(" ".join(manifest_args[item].values())+"\n")
-
-}
-
-do_unpack[cleandirs] += "${WORKDIR}/${SRC_URI_FROM_VAR_UNPACK_DIR}"
-do_unpack[postfuncs] += "generate_manifest"
-do_unpack[vardeps] += "${SRC_URI_FROM_VAR_NAME}"
@@ -4,22 +4,14 @@
 # The class is extending deploy function so you recipe must inherit deploy and
 # have a do_deploy function (even if it is empty)

-# Add a variable name to XENGUEST_IMAGE_VARS_EXTRA if you want it to
-# appear in xenguest.env when the image is deployed
-
-# Use standard xenguest_image
-inherit xenguest_image
+# Use standard xenguest-image
+inherit xenguest-image

 # Add a DTB file for the guest
 # Only one file should be added, if this is set multiple times or in several
 # recipes, the last recipe setting it will prevail.
 XENGUEST_EXTRA_DTB ??= ""

-# Add a ramdisk file for the guest
-# Only one file should be added, if this is set multiple times or in several
-# recipes, the last recipe setting it will prevail.
-XENGUEST_EXTRA_RAMDISK ??= ""
-
 # Append something to the guest xen configuration
 # All files here will be merged together in the final xen configuration
 # This can contain several files or be used in several recipes
@@ -42,13 +34,7 @@ XENGUEST_EXTRA_FILES ??= ""
 # dir1/file1 file in the disk content parameters).
 XENGUEST_EXTRA_DISK_FILES ??= ""

-# Extra vars to be written to xenguest.env
-XENGUEST_IMAGE_VARS_EXTRA += "\
- XENGUEST_EXTRA_DTB XENGUEST_EXTRA_RAMDISK XENGUEST_EXTRA_XENCONFIG \
- XENGUEST_EXTRA_INIT_PRE XENGUEST_EXTRA_INIT XENGUEST_EXTRA_INIT_POST \
- XENGUEST_EXTRA_FILES XENGUEST_EXTRA_DISK_FILES"
-
-do_deploy:append() {
+do_deploy_append() {
    if [ -z "${XENGUEST_IMAGE_DEPLOY_DIR}" -o \
        -z "${XENGUEST_IMAGE_DEPLOY_SUBDIR}" ]; then
        die "Configuration error: XENGUEST_IMAGE_DEPLOY_DIR or XENGUEST_IMAGE_DEPLOY_SUBDIR is empty"
@@ -58,22 +44,15 @@ do_deploy:append() {

    if [ -n "${XENGUEST_EXTRA_DTB}" ]; then
        if [ ! -f ${XENGUEST_EXTRA_DTB} ]; then
-            die "xenguest_image: DTB file ${XENGUEST_EXTRA_DTB} does not exist"
+            die "xenguest-image: DTB file ${XENGUEST_EXTRA_DTB} does not exist"
        fi
        call_xenguest_mkimage partial --xen-device-tree=${XENGUEST_EXTRA_DTB}
    fi

-    if [ -n "${XENGUEST_EXTRA_RAMDISK}" ]; then
-        if [ ! -f ${XENGUEST_EXTRA_RAMDISK} ]; then
-            die "xenguest_image: DTB file ${XENGUEST_EXTRA_RAMDISK} does not exist"
-        fi
-        call_xenguest_mkimage partial --xen-ramdisk=${XENGUEST_EXTRA_RAMDISK}
-    fi
-
    if [ -n "${XENGUEST_EXTRA_XENCONFIG}" ]; then
        for f in ${XENGUEST_EXTRA_XENCONFIG}; do
            if [ ! -f $f ]; then
-                die "xenguest_image: Xen config $f does not exist"
+                die "xenguest-image: Xen config $f does not exist"
            fi
            call_xenguest_mkimage partial --xen-append=$f
        done
@@ -81,21 +60,21 @@ do_deploy:append() {

    if [ -n "${XENGUEST_EXTRA_INIT_PRE}" ]; then
        if [ ! -f ${XENGUEST_EXTRA_INIT_PRE} ]; then
-            die "xenguest_image: Init script ${XENGUEST_EXTRA_INIT_PRE} does not exist"
+            die "xenguest-image: Init script ${XENGUEST_EXTRA_INIT_PRE} does not exist"
        fi
        call_xenguest_mkimage partial --init-pre=${XENGUEST_EXTRA_INIT_PRE}
    fi

    if [ -n "${XENGUEST_EXTRA_INIT}" ]; then
        if [ ! -f ${XENGUEST_EXTRA_INIT} ]; then
-            die "xenguest_image: Init script ${XENGUEST_EXTRA_INIT} does not exist"
+            die "xenguest-image: Init script ${XENGUEST_EXTRA_INIT} does not exist"
        fi
        call_xenguest_mkimage partial --init-script=${XENGUEST_EXTRA_INIT}
    fi

    if [ -n "${XENGUEST_EXTRA_INIT_POST}" ]; then
        if [ ! -f ${XENGUEST_EXTRA_INIT_POST} ]; then
-            die "xenguest_image: Init script ${XENGUEST_EXTRA_INIT_POST} does not exist"
+            die "xenguest-image: Init script ${XENGUEST_EXTRA_INIT_POST} does not exist"
        fi
        call_xenguest_mkimage partial --init-post=${XENGUEST_EXTRA_INIT_POST}
    fi
@@ -103,7 +82,7 @@ do_deploy:append() {
    if [ -n "${XENGUEST_EXTRA_FILES}" ]; then
        for f in ${XENGUEST_EXTRA_FILES}; do
            if [ ! -f $f ]; then
-                die "xenguest_image: Xen file $f does not exist"
+                die "xenguest-image: Xen file $f does not exist"
            fi
            call_xenguest_mkimage partial --xen-add-file=$f
        done
@@ -112,12 +91,12 @@ do_deploy:append() {
    if [ -n "${XENGUEST_EXTRA_DISK_FILES}" ]; then
        for f in ${XENGUEST_EXTRA_DISK_FILES}; do
            if [ ! -f $f ]; then
-                die "xenguest_image: Disk file $f does not exist"
+                die "xenguest-image: Disk file $f does not exist"
            fi
            call_xenguest_mkimage partial --disk-add-file=$f
        done
    fi
 }
-# Need to have xenguest_image tool
+# Need to have xenguest-image tool
 do_deploy[depends] += "xenguest-base-image:do_deploy"

@@ -30,7 +30,7 @@ XENGUEST_IMAGE_ROOT ??= "/dev/xvda1"
 # Guest kernel command line arguments
 XENGUEST_IMAGE_CMDLINE ??= "earlyprintk=xenboot console=hvc0 rw"

-# Extra commands to add to xenguest_image when creating the image
+# Extra commands to add to xenguest-image when creating the image
 XENGUEST_IMAGE_EXTRA_CMD ??= ""

 # Kernel binary
@@ -43,17 +43,14 @@ XENGUEST_IMAGE_KERNEL ??= "Image"
 # be included in the xenguest image)
 XENGUEST_IMAGE_DISK_SIZE ??= "${@ '4' if not d.getVar('INITRAMFS_IMAGE') else '0'}"

-# set empty partition to be used by xenguest-manager for this image
-XENGUEST_IMAGE_DISK_DEVICE ??= ""
-
 #
-# XENGUEST_IMAGE_DISK_PARTITIONS is used to describe the partitions to setup
+# XENGUEST_IMAGE_DISK PARTITIONS is used to describe the partitions to setup
 # and their content.
 # It must be set to a space separated list of entries with each entry having
-# the format num:sz:[fs]:[file] where:
+# the format num:sz:fs:[file] where:
 # - num is a partition number
-# - sz is the partition size in MB or GB(default), e.g 1000M or 1[G]
-# - fs is optional filesystem to use for the partition
+# - sz is the partition size in Gigabit
+# - fs is the filesystem to use for the partition
 # - file is optionally pointing to a file to use as content of the partition
 #   Please check image_types_xenguest.bbclass for rootfs handling of files
 #
@@ -61,14 +58,10 @@ XENGUEST_IMAGE_DISK_DEVICE ??= ""
 # and containing the root filesystem produced by Yocto
 XENGUEST_IMAGE_DISK_PARTITIONS ??= "1:${XENGUEST_IMAGE_DISK_SIZE}:ext4:rootfs.tar.gz"

-# XENGUEST_IMAGE_NETWORK_TYPE can be set to "bridge", "nat" or "none".
-# The "bridge" type will share the physical eth interface from dom0 with the
-# domU. This will allow the domU to have access to the external network.
-# The "nat" type will setup a virtual network between dom0 and domU and also
-# configure and run the kea dhcp4 server on dom0 to serve the domU.
-# The "none" type will not affect any networking setting between on dom0 and
-# domU.
-XENGUEST_IMAGE_NETWORK_TYPE ??= "bridge"
+# XENGUEST_IMAGE_NETWORK_BRIDGE can be set to 1 to have a network interface
+# on the guest connected to host bridged network. This will provide the guest
+# with a network interface connected directly to the external network
+XENGUEST_IMAGE_NETWORK_BRIDGE ??= "1"

 # Sub-directory in wich the guest is created. This is create in deploy as a
 # subdirectory and must be coherent between all components using this class so
@@ -83,18 +76,6 @@ XENGUEST_IMAGE_DEPLOY_SUBDIR ?= "xenguest"
 # - something in ${WORKDIR} if you need to clone and manipulate an image
 XENGUEST_IMAGE_DEPLOY_DIR ??= "${DEPLOYDIR}"

-# These vars are used by image_types_xenguest.bbclass to generate the
-# xenguest.env file. In a recipe that inherits this class and extra variables
-# that should be included in xenguest.env need to be added to
-# XENGUEST_IMAGE_VARS_EXTRA
-XENGUEST_IMAGE_VARS ?= "\
- MACHINE DISTRO DISTRO_VERSION DISTRO_FEATURES TUNE_FEATURES TARGET_FPU \
- IMAGE_FEATURES INITRAMFS_IMAGE_BUNDLE INITRAMFS_IMAGE \
- XENGUEST_IMAGE_MEMORY_SIZE XENGUEST_IMAGE_NUM_VCPUS XENGUEST_IMAGE_AUTOBOOT \
- XENGUEST_IMAGE_ROOT XENGUEST_IMAGE_CMDLINE XENGUEST_IMAGE_EXTRA_CMD \
- XENGUEST_IMAGE_KERNEL XENGUEST_IMAGE_DISK_SIZE XENGUEST_IMAGE_DISK_DEVICE \
- XENGUEST_IMAGE_DISK_PARTITIONS XENGUEST_IMAGE_NETWORK_TYPE"
-
 #
 # Wrapper to call xenguest-mkimage
 # It is using XENGUEST_IMAGE_DEPLOY_DIR and XENGUEST_IMAGE_DEPLOY_SUBDIR
@@ -144,27 +125,21 @@ xenguest_image_create() {

    # create disk if needed
    disksize="${XENGUEST_IMAGE_DISK_SIZE}"
-    case ${disksize:=0} in
-        0|0M|0G)
-            ;;
-        *)
-            # setup disk size
-            call_xenguest_mkimage update --disk-reset-config --disk-size=$disksize
-
-            diskparts="${XENGUEST_IMAGE_DISK_PARTITIONS}"
-            if [ -n "$diskparts" ]; then
-                for arg in $diskparts; do
-                    call_xenguest_mkimage update --disk-add-part=$arg
-                done
-            fi
-            diskdevice="${XENGUEST_IMAGE_DISK_DEVICE}"
-            if [ -n "$diskdevice" ]; then
-                call_xenguest_mkimage update --disk-device="${diskdevice}"
-            fi
-
-            ;;
-    esac
+    if [ -z "$disksize" ]; then
+        disksize="0"
+    fi
+    if [ $disksize -gt 0 ]; then
+        # setup disk size
+        call_xenguest_mkimage update --disk-reset-config --disk-size=$disksize

+        diskparts="${XENGUEST_IMAGE_DISK_PARTITIONS}"
+        if [ -n "$diskparts" ]; then
+            for arg in $diskparts; do
+                call_xenguest_mkimage update --disk-add-part=$arg
+                partnum="$(expr $partnum + 1)"
+            done
+        fi
+    fi

    if [ "${XENGUEST_IMAGE_AUTOBOOT}" = "1" ]; then
        call_xenguest_mkimage update --set-param=GUEST_AUTOBOOT=1
@@ -172,45 +147,14 @@ xenguest_image_create() {
        call_xenguest_mkimage update --set-param=GUEST_AUTOBOOT=0
    fi

-    if [ -n "${XENGUEST_IMAGE_NETWORK_TYPE}" ]; then
-        call_xenguest_mkimage update --set-param=XENGUEST_NETWORK_TYPE="${XENGUEST_IMAGE_NETWORK_TYPE}"
+    if [ "${XENGUEST_IMAGE_NETWORK_BRIDGE}" = "1" ]; then
+        call_xenguest_mkimage update --set-param=NETWORK_BRIDGE=1
    else
-        call_xenguest_mkimage update --set-param=XENGUEST_NETWORK_TYPE="none"
+        call_xenguest_mkimage update --set-param=NETWORK_BRIDGE=0
    fi
 }

-XENGUEST_ENV_STAGING_DIR ??= "${STAGING_DIR}/${MACHINE}/xenguestenv"
-
-# Create an intermediary file containing all variables used to by a
-# particular recipe that inherits this class
-
-# File will contain the values of all variables listed in:
-#   XENGUEST_IMAGE_VARS_EXTRA
-python do_deploy_xenguestenv () {
-    xenguest_vars = d.getVar('XENGUEST_IMAGE_VARS_EXTRA')
-    if not xenguest_vars:
-        return
-
-    outdir = d.getVar('XENGUEST_ENV_STAGING_DIR')
-
-    # Writes file to tmp/sysroots/${MACHINE}/xenguestenv/ by default
-    filename = os.path.basename(d.getVar('FILE')) + '.xenguestenv'
-    with open(os.path.join(outdir, filename), 'w') as envf:
-        for var in xenguest_vars.split():
-            value = d.getVar(var)
-            if value:
-                # Write value only if set
-                envf.write('%s="%s"\n' % (var, " ".join(value.split())))
-        envf.close()
-}
-
-# Since the intermediary file is deleted by do_merge_xenguestenv it
-# must be re-created every time
-do_deploy_xenguestenv[vardeps] += "${XENGUEST_IMAGE_VARS_EXTRA}"
-do_deploy_xenguestenv[dirs] = "${XENGUEST_ENV_STAGING_DIR}"
-
-addtask deploy_xenguestenv before do_populate_sysroot
-
+#
 # Clone the current xenguest from deploy to manipulate it locally
 # This is required if you need to change things before packing an image
 # To set the local directory where to clone you must set
@@ -224,7 +168,7 @@ xenguest_image_clone() {
    fi

    if [ ! -f ${DEPLOY_DIR_IMAGE}/${XENGUEST_IMAGE_DEPLOY_SUBDIR}/guest.cfg ]; then
-        die "xenguest_image: ${DEPLOY_DIR_IMAGE}/${XENGUEST_IMAGE_DEPLOY_SUBDIR} does not contain a valid guest"
+        die "xenguest-image: ${DEPLOY_DIR_IMAGE}/${XENGUEST_IMAGE_DEPLOY_SUBDIR} does not contain a valid guest"
    fi

    rm -rf ${XENGUEST_IMAGE_DEPLOY_DIR}/${XENGUEST_IMAGE_DEPLOY_SUBDIR}
@@ -1,7 +1,7 @@
 # This files is added when DISTRO_FEATURES contains arm-autonomy-guest

 # We need to have ipv4 activated
-DISTRO_FEATURES:append = " ipv4"
+DISTRO_FEATURES_append = " ipv4"

 # Build a xenguest type image
 IMAGE_CLASSES += "image_types_xenguest"
@@ -9,7 +9,3 @@ IMAGE_FSTYPES += "xenguest"

 # xenguest kernel extension to handle initramfs
 KERNEL_CLASSES += "kernel-xenguest"
-
-IMAGE_INSTALL:append = "${@bb.utils.contains('DISTRO_FEATURES', 'docker', \
-                        ' packagegroup-docker-runtime-minimal', \
-                        '', d)}"
@@ -1,23 +1,10 @@
 # This files is added when DISTRO_FEATURES contains arm-autonomy-host

-ARM_AUTONOMY_HOST_OVERRIDES = ":autonomy-host"
-
 # We need to have xen and ipv4 activated
-DISTRO_FEATURES:append = " xen ipv4"
-DISTRO_FEATURES_NATIVE:append = " arm-autonomy-host"
+DISTRO_FEATURES_append = " xen ipv4"
+DISTRO_FEATURES_NATIVE_append = " arm-autonomy-host"

 # Don't include kernels in standard images when building arm-autonomy-host
 # If the kernel image is needed in the rootfs the following should be set from
-# a bbappend: RDEPENDS:${KERNEL_PACKAGE_NAME}-base = "${KERNEL_PACKAGE_NAME}-image"
-RDEPENDS:${KERNEL_PACKAGE_NAME}-base ?= ""
-
-# Require extra machine specific settings from meta-arm-bsp dynamic-layers only
-# if meta-arm-bsp is in the bblayers.conf
-# Directory for meta-arm-autonomy/dynamic-layers/meta-arm-bsp machine extra settings
-ARM_AUTONOMY_ARM_BSP_DYNAMIC_EXTRA_CFGDIR = "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/conf/machine"
-ARM_AUTONOMY_MACHINE_EXTRA_REQUIRE ?= \
-"${ARM_AUTONOMY_ARM_BSP_DYNAMIC_EXTRA_CFGDIR}/arm-autonomy-machine-extra-settings.inc"
-
-require ${@bb.utils.contains('BBFILE_COLLECTIONS', 'meta-arm-bsp', \
-                             '${ARM_AUTONOMY_MACHINE_EXTRA_REQUIRE}' , \
-                             '', d)}
+# a bbappend: RDEPENDS_${KERNEL_PACKAGE_NAME}-base = "${KERNEL_PACKAGE_NAME}-image"
+RDEPENDS_${KERNEL_PACKAGE_NAME}-base ?= ""
@@ -9,7 +9,7 @@ BBFILES += " \

 BBFILE_COLLECTIONS += "meta-arm-autonomy"
 BBFILE_PATTERN_meta-arm-autonomy = "^${LAYERDIR}/"
-BBFILE_PRIORITY_meta-arm-autonomy = "5"
+BBFILE_PRIORITY_meta-arm-autonomy = "6"
 LAYERDEPENDS_meta-arm-autonomy = " \
   core \
   yocto \
@@ -17,23 +17,19 @@ LAYERDEPENDS_meta-arm-autonomy = " \
   networking-layer \
   virtualization-layer \
 "
-LAYERSERIES_COMPAT_meta-arm-autonomy = "honister"
+LAYERSERIES_COMPAT_meta-arm-autonomy = "dunfell"

 # We don't activate virtualization feature from meta-virtualization as it
 # brings in lots of stuff we don't need. We need to disable the sanity check
 # otherwise the user will see a warning on each build.
 SKIP_META_VIRT_SANITY_CHECK = "1"

-ARM_AUTONOMY_LAYERDIR := "${LAYERDIR}"
 # Directory of our distro config files
-ARM_AUTONOMY_DISTRO_CFGDIR = "${ARM_AUTONOMY_LAYERDIR}/conf/distro/include/"
+ARM_AUTONOMY_DISTRO_CFGDIR = "${LAYERDIR}/conf/distro/include/"

 # Add class to handle arm-autonomy distro extensions
-USER_CLASSES:append = " arm-autonomy-features"
+USER_CLASSES_append = " arm-autonomy-features"

 BBFILES_DYNAMIC += " \
    meta-arm-bsp:${LAYERDIR}/dynamic-layers/meta-arm-bsp/*/*/*.bbappend \
-    meta-arm-bsp:${LAYERDIR}/dynamic-layers/meta-arm-bsp/*/*/*.bb \
 "
-# Root directory for the meta-arm-autonomy/dynamic-layers/meta-arm-bsp
-ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR = "${ARM_AUTONOMY_LAYERDIR}/dynamic-layers/meta-arm-bsp"
@@ -8,10 +8,10 @@ require conf/machine/include/arm/arch-armv8a.inc

 KERNEL_IMAGETYPE = "Image"

-IMAGE_FSTYPES:append = " tar.bz2"
+IMAGE_FSTYPES += "tar.bz2"

 PREFERRED_PROVIDER_virtual/kernel = "linux-yocto"
-PREFERRED_VERSION_linux-yocto ?= "5.10%"
+PREFERRED_VERSION_linux-yocto ?= "5.4%"

 DISTRO_FEATURES += "arm-autonomy-guest"

@@ -1,5 +0,0 @@
-# This file will be required by different xenguest recipes to provide
-# common variables, which can be configured in local.conf
-
-# Xenguest image file install location
-XENGUEST_MANAGER_GUEST_DIR ?= "${datadir}/guests/"
@@ -1,226 +0,0 @@
-arm-autonomy Multiconfig Build Environment Instructions
-==================
-
-This documentation explains how to simplify the process of building hosts
-and guests in a single bitbake command, rather than in seperate build
-folders. You can read more about multiconfig in the bitbake documentation:
-
- - [bitbake user manual](https://www.yoctoproject.org/docs/latest/bitbake-user-manual/bitbake-user-manual.html)
-
-To achieve a multiconfig build, a number of different config files need to
-be created in a single build directory.
-
-Create a new project
----------------
-
-Before you start, you will need to follow the instructions in
-"Create a project" from the quickstart guide, to create a new project
-directory with
-  ```
-  oe-init-build-env my-mc-project
-  ```
-Ensure it has all the required layers in bblayers.conf as listed in
-`arm-autonomy-quickstart.md`. The result should be a directory containing:
-
-```
-- conf
- | -- bblayers.conf
- | -- local.conf
- | -- templateconf.cfg
-```
-
-Add multiconfig
----------------
-
-The steps required to make the project build both the host and any
-number of guests as required are:
-
-1. Create a new directory under `conf/` named `multiconfig/`
-
-2. Create two new files in this directory:
-`multiconfig/host.conf`
-`multiconfig/guest.conf`
-These files will contain any configurations that are specific to either the
-host or the guest. The resulting directory tree should be:
-
-```
-- conf
- | -- bblayers.conf
- | -- local.conf
- | -- templateconf.cfg
- | -- multiconfig
-    | -- host.conf
-    | -- guest.conf
-```
-
-3. In `local.conf` the following config variables must be added:
-
-```
-MACHINE ?= "fvp-base"
-
-# ---Guest Config Start--- #
-MC_GUEST = "guest"
-
-MC_GUEST_NAME = "guest1"
-
-MC_GUEST_IMAGERECIPE = "core-image-minimal"
-MC_GUEST_MACHINE = "arm64-autonomy-guest"
-
-MC_GUEST_INITRAMFS_IMAGE_BUNDLE ?= ""
-MC_GUEST_INITRAMFS_IMAGE ?= ""
-
-# Uncomment for initramfs
-#MC_GUEST_INITRAMFS_IMAGE_BUNDLE = "1"
-#MC_GUEST_INITRAMFS_IMAGE = "${MC_GUEST_IMAGERECIPE}"
-
-# These variables are set automatically, don't override them!
-MC_GUEST_FILENAME_PREFIX = "${@ 'Image-initramfs' if d.getVar('MC_GUEST_INITRAMFS_IMAGE_BUNDLE',d) else '${MC_GUEST_IMAGERECIPE}' }"
-
-MC_GUEST_FILENAME = "${MC_GUEST_FILENAME_PREFIX}-${MC_GUEST_MACHINE}.xenguest"
-
-MC_GUEST_DEP = "${@ 'virtual/kernel:do_deploy' if d.getVar('MC_GUEST_INITRAMFS_IMAGE_BUNDLE',d) else '${MC_GUEST_IMAGERECIPE}:do_merge_xenguestenv'}"
-
-MC_DOIMAGE_MCDEPENDS += "mc:${MC_HOST}:${MC_GUEST}:${MC_GUEST_DEP} "
-
-BBMULTICONFIG += "${MC_GUEST} "
-
-ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUESTS += "file://${TOPDIR}/${MC_GUEST}/deploy/images/${MC_GUEST_MACHINE}/${MC_GUEST_FILENAME};guestname=${MC_GUEST_NAME} "
-# ---Guest Config End--- #
-
-# ---Host Config Start--- #
-MC_HOST = "host"
-
-BBMULTICONFIG += "${MC_HOST} "
-# ---Host Config End--- #
-```
-
-These variables will be used in both of the multiconf files. `MC_HOST` and
-`MC_GUEST` should not be altered without renaming the conf files, but most
-`MC_GUEST_*` variables can be customised if you desire.
-
-4. Next set the contents of `multiconfig/guest.conf`:
-
-```
-TMPDIR = "${TOPDIR}/${MC_GUEST}"
-
-MACHINE = "${MC_GUEST_MACHINE}"
-DISTRO_FEATURES += " arm-autonomy-guest"
-
-INITRAMFS_IMAGE_BUNDLE = "${MC_GUEST_INITRAMFS_IMAGE_BUNDLE}"
-INITRAMFS_IMAGE = "${MC_GUEST_INITRAMFS_IMAGE}"
-
-IMAGE_FSTYPES += "${@ 'cpio' if d.getVar('MC_GUEST_INITRAMFS_IMAGE_BUNDLE',d) else ''}"
-
-# ANY OTHER GUEST CONFIG
-```
-
-To modify the MACHINE or INITRAMFS variables change the equivalent
-config in local.conf rather than modifying this file directly. You can also
-append any other config desired for the guest after "ANY OTHER GUEST CONFIG",
-for example `XENGUEST_IMAGE_DISK_SIZE`.
-
-Make sure not to change `${DEPLOY_DIR_IMAGE}` to anything other than
-`${TMPDIR}/deploy/images`, as this is assumed by local.conf.
-
-5. Lastly set the contents of `multiconfig/host.conf`:
-
-```
-TMPDIR = "${TOPDIR}/${MC_HOST}"
-
-DISTRO_FEATURES += " arm-autonomy-host"
-
-# ANY OTHER HOST CONFIG
-```
-
-Building the image
----------------
-
-To build the multiconfig image the command is:
-```
-bitbake mc:host:arm-autonomy-host-image-minimal
-```
-
-The first time this is run you may see a warning related to the SRC_URI:
-```
-Unable to get checksum for xenguest-extern-guests SRC_URI entry foo.xenguest: file could not be found
-```
-
-This is expected, and only indicates that the guest image has not yet been
-generated when the host parses the SRC_URI. By the time it is needed by the
-host recipe fetch task it will be present.
-
-During the build you should see that guest tasks are also being executed in
-parallel. Once the build completes the guest will already be in the rootfs of
-the host thanks to `ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUEST`
-
-The final host image including the guests will be deployed in
-`host/deploy/images/`
-
-
-Multiple Guests
----------------
-
-To have multiple guests with the same config the line which appends to
-`ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUESTS` just needs to pass the argument
-'guestcount=#' to install symlink copies of the xenguest file on the host.
-Documentation for the guestcount parameter can be found in
-documentation/arm-autonomy-quickstart.md in the section titled
-'Include guests directly in the host image'. This will ensure that the guest
-is still only built once, despite resulting in multiple copies on the target.
-
-If guests are required to have different configurations, each will need its own
-config file, e.g. 'netguest.conf'. Ensure that the name of the conf file does
-not contain any hyphens, as this will create errors when it becomes part of a
-function name. In this file the values of TMPDIR, MACHINE, DISTRO_FEATURES etc.
-should be the same as above, but with the prefix "MC_GUEST_*" modified to
-something different to avoid collisions (e.g. MC_GUEST_2_*).
-
-As before, your additional config for the guest type should
-follow "ANY OTHER GUEST CONFIG"
-
-In your local.conf, everything between `---Guest Config Start---` and
-`---Guest Config End---` will need to be duplicated for each desired guest type.
-All copies of variables that start `MC_GUEST` must be modified with the same
-prefix as in the new guest config file (e.g. `MC_GUEST_2_*`).
-
-Each chunk of guest config in local.conf has automatic guest variables
-(found after the line "These variables are set automatically...").
-These should all use the same prefix as their chunk in their values,
-for example:
-```
-MC_GUEST_2_FILENAME_PREFIX = "${@ 'Image-initramfs' if d.getVar('MC_GUEST_2_INITRAMFS_IMAGE_BUNDLE',d) else '${MC_GUEST_2_IMAGERECIPE}' }"
-```
-
-Guest with provisioned disk
----------------
-
-To add guest rootfs partition to host wic image,
-set `AUTONOMY_HOST_EXTRA_PARTITION` with proper wks partition entry, e.g:
-
-```
-AUTONOMY_HOST_EXTRA_PARTITION = "part --label provisioned-guest --source rawcopy --fstype=ext4 --ondisk sda --align 1024 \
--sourceparams=file=${TOPDIR}/${MC_GUEST}/deploy/images/${MC_GUEST_MACHINE}/${MC_GUEST_FILENAME_PREFIX}-${MC_GUEST_MACHINE}.ext4"
-```
-
-inside your host.conf file.
-
-The rest of the configuration has to be appended to guest.conf file:
-
-```
-# ANY OTHER GUEST CONFIG
-XENGUEST_IMAGE_DISK_SIZE = "0"
-XENGUEST_IMAGE_SRC_URI_XEN_CONFIG = "file://\${TOPDIR}/path/to/rootdisk.cfg"
-XENGUEST_IMAGE_DISK_DEVICE = "_GUEST_DISK_DEVICE_"
-XENGUEST_IMAGE_ROOT = "/dev/xvda"
-IMAGE_ROOTFS_SIZE = "102400"
-IMAGE_FSTYPES = "ext4"
-```
-
-Example content of rootdisk.cfg:
-
-```
-disk = ["phy:_GUEST_DISK_DEVICE_,xvda,w"]
-```
-
-`_GUEST_DISK_DEVICE_` should be substituted with `/dev/sdaX`,
-according to wks file.
@@ -1,9 +1,9 @@
 arm-autonomy Quick Start
 ==================

-This documentation explains how to quickly start with the arm-autonomy layer,
+This documentation is explaining how to quickly start with arm-autonomy layer
 and the main features provided.
-In the documentation directory you will find some more detailed documentation
+You will find in the documentation directory some more detailed documentation
 for each of the functionalites provided by this layer.

 What to use this layer for?
@@ -29,7 +29,7 @@ First you must download the Yocto layers needed:
 - all other layers you might want to use

 For each of the downloaded layer make sure you checkout the release of Yocto
-you want to use (for example honister using `git checkout honister`).
+you want to use (for example zeus using `git checkout zeus`).

 Please follow [Yocto documentation](https://www.yoctoproject.org/docs/latest/brief-yoctoprojectqs/brief-yoctoprojectqs.html)
 in order to have the required dependencies.
@@ -56,8 +56,8 @@ Here are the main steps to create an arm-autonomy project:
  bitbake-layers add-layer $LAYERDIR_BASE/meta-poky $LAYERDIR_BASE/meta-yocto-bsp \
   $LAYERDIR_BASE/meta-openembedded/meta-oe $LAYERDIR_BASE/meta-openembedded/meta-python \
   $LAYERDIR_BASE/meta-openembedded/meta-filesystems $LAYERDIR_BASE/meta-openembedded/meta-networking \
-   $LAYERDIR_BASE/meta-arm/meta-arm $LAYERDIR_BASE/meta-arm/meta-arm-toolchain \
-   $LAYERDIR_BASE/meta-arm/meta-arm-bsp $LAYERDIR_BASE/meta-arm/meta-arm-autonomy \
+   $LAYERDIR_BASE/meta-virtualization $LAYERDIR_BASE/meta-arm/meta-arm-autonomy \
+   $LAYERDIR_BASE/meta-arm/meta-arm $LAYERDIR_BASE/meta-arm/meta-arm-bsp
  ```

  Example of a `conf/bblayers.conf`:
@@ -71,16 +71,12 @@ Here are the main steps to create an arm-autonomy project:
    /home/user/arm-autonomy/meta-openembedded/meta-filesystems \
    /home/user/arm-autonomy/meta-openembedded/meta-networking \
    /home/user/arm-autonomy/meta-virtualization \
-    /home/user/arm-autonomy/meta-arm/meta-arm \
-    /home/user/arm-autonomy/meta-arm/meta-arm-toolchain \
-    /home/user/arm-autonomy/meta-arm/meta-arm-bsp \
    /home/user/arm-autonomy/meta-arm/meta-arm-autonomy \
+    /home/user/arm-autonomy/meta-arm/meta-arm \
+    /home/user/arm-autonomy/meta-arm/meta-arm-bsp \
    "
  ```

-  Be aware that changing the order may break some dependencies if editing the
-  config file manually.
-
 Those steps will have to be done for each project you will have to create.

 Host project
@@ -110,8 +106,7 @@ The project will generate a Linux kernel, a root filesystem, a Xen binary and
 a DTB modified to include the required entries to boot Xen and Linux as Dom0
 (this DTB has the extension `-xen.dtb`).

-To boot the system using a u-boot base board for machines other than FVP-Base
-you will need to:
+To boot the system using an u-boot base board you will need to:
 - Load the kernel (by default at 0x80080000 unless you modify
  XEN_DEVICETREE_DOM0_ADDR value)
 - Load the xen device tree (for example at 0x83000000)
@@ -120,88 +115,50 @@ you will need to:

 In this example the addresses might need to be adapted depending on your board.

-For arm-autonomy host on FVP-Base, u-boot has been modified such that
+For arm-autonomy host on FVP-Base u-boot has been modified such that
 `booti 0x84000000 - 0x83000000` is the default boot command. If FVP-Base is your
 MACHINE target there should be no need to interfere with u-boot.

 Guest project
 -------------
-The guest projects are not target specific and will instead use a Yocto MACHINE
-defined in meta-arm-autonomy to include only the Linux configuration required to
-run a xen guest.
+The guest projects are not target specific and will use a Yocto MACHINE defined
+in meta-arm-autonomy to include only the Linux configuration required to run
+a xen guest.

 To create a guest project:

 1. Follow the steps of "Create a project"

-2. Optionally add layers required to build the guest image, and any features you
-   need.
+2. Optionaly add layers required to build the image and features you need.

-3. Edit conf/local.conf to add `arm-autonomy-guest` to the DISTRO_FEATURES and
+3. edit conf/local.conf to add `arm-autonomy-guest` to the DISTRO_FEATURES and
   set MACHINE to `arm64-autonomy-guest`:
  ```
  MACHINE = "arm64-autonomy-guest"
  DISTRO_FEATURES += "arm-autonomy-guest"
  ```

-4. Build the image you want.
+4. build the image you want.
   For example `bitbake core-image-minimal`

 The build will create a ".xenguest" image that can be use on an host project
-with the xenguest-manager, as well as a file "xenguest.env" containing the
-variables used to configure and generate the guest image.
-
-The guest can also be built as a 'multiconfig' sub project of the host, see
-`meta-arm-autonomy/documentation/arm-autonomy-multiconfig.md` for more
- information
+with the xenguest-manager.

 Include guests directly in the host image
 -----------------------------------------
-The layer provides a way to directly include one or more images generated by
-guest projects in the host project.
+The layer provides a way to directly include in the host project one or several
+images generated by guest projects.

 To use this feature, you must edit your host project `local.conf` file and
-add set the value of 'ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUESTS' to the list of
-paths to xenguest images you want to include in your host.
-
-There are 4 supported formats for ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUESTS
-entries:
-
- http/https url
-  - "https://[url]:[port]/foo.xenguest;md5sum=..."
-
- file:// absolute local path from root
-  - "file:///xenguests/bar.xenguest"
-
- file:// path relative to FILESEXTRAPATHS
- - "file://relative/baz.xenguest"
-
- plain absolute local path from root
-  - "/xenguests/absolute/xyzzy.xenguest"
-
-It is not recommended to use other bitbake URL types, as they may result in
-undefined behaviour.
-
-A semicolon seperated list of install arguments can follow each image path:
- guestname  : the name that will be attached when the image is imported
-               (default: [filename, without extension])
- guestcount : the number of copies of the guest to install, with
-               incrementing numbers appended to the name
-               (default: 1)
-
-Any other arguments, for example an md5sum, will be assumed to be fetch
-arguments, and will be appended to the path in the SRC_URI.
+add set ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUESTS to the list of xenguest images
+you want to include in your host. Each xenguest image must be given using a
+full path to it.
 For example:
 ```
-ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUESTS = "\
-https://[url]:[port]/base.xenguest;md5sum=[checksum];guestname=http \
-file:///guests/base.xenguest;guestname=file_abs \
-file://foo/base.xenguest;guestname=file_rel;guestcount=2 \
-/guests/foo/bar/base.xenguest;guestname=no_fetcher \ "
+ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUESTS = "/home/user/guest-project/tmp/deploy/images/arm64-autonomy-guest/core-image-minimal-arm64-autonomy-guest.xenguest;guestname=myguest"
 ```
-
-Documentation for setting up a multiconfig build can be found in:
-meta-arm-autonomy/documentation/arm-autonomy-multiconfig.md
+This will add the guest and name it `myguest` on the host project image and
+the xenguest-manager will automatically boot it during startup.

 Add support for your board
 --------------------------
@@ -222,7 +179,7 @@ started). You can find the complete list of the kernel configuration elements
 required in `recipes-kernel/linux/arm-autonomy-kmeta/features/arm-autonomy/xen-host.cfg`.

 ### Define the drive and partition to use for the LVM volume
-The xenguest-manager creates guest storage drives using LVM on an empty
+The xenguest-manager is creating disk hard drive using LVM on an empty
 partition. The default value is set to use /dev/sda2.
 You can change this for your board by setting XENGUEST_MANAGER_VOLUME_DEVICE.

@@ -231,37 +188,37 @@ Check `recipes-extended/xenguest/xenguest-manager.bbappend` for examples.
 Please also read xenguest-manager.md.

 ### Define the interface to add to xenguest network bridge
-xenguest-network bridge creates a bridge on the host and adds network
-interfaces to it so that guests connected to it have access to external network.
+xenguest-network bridge is creating a bridge on the host and adds network
+interfaces to it so that guest connected to it have access to external network.
 By default `eth0` is set as the list of interfaces to be added to the bridge.
 Depending on your board or use case you might want to use an other interface
 or use multiple interfaces.
 You can change this for your board by setting XENGUEST_NETWORK_BRIDGE_MEMBERS.

-Check `recipes-extended/xenguest/xenguest-network.bbappend` for
+Check `recipes-extended/xenguest/xenguest-network-bridge.bbappend` for
 exmaples.

 Please also read xenguest-network-bridge.md.

 ### Define the network configuration of the xenguest network bridge
-xenguest-network puts the host network interfaces in a bridge and configures it
-by default to use dhcp.
+xenguest network bridge is putting the host network interfaces in a bridge
+and is configuring it by default to use dhcp.
 If you need a different type of configuration you can set
-XENGUEST_NETWORK_BRIDGE_CONFIG in your xenguest-network-bridge.bbappend to use
+XENGUEST_NETWORK_BRIDGE_CONFIG in a xenguest-network-bridge.bbappend to use
 a different file.
-The recipe will look for the file in ${WORKDIR}, so you will need to add it to
-the SRC_URI in your bbappend.
+The recipe will look for the file in ${WORKDIR} so you will need to add it to 
+SRC_URI in your bbappend.
 The recipe will also substitute `###BRIDGE_NAME###` with the bridge name
-configured in ${XENGUEST_NETWORK_BRIDGE_NAME} when the config file is installed.
+configured in ${XENGUEST_NETWORK_BRIDGE_NAME}.

 You can find an example configuration file in
 `recipes-extended/xenguest/files/xenguest-network-bridge-dhcp.cfg.in`.

-Please also read xenguest-network.md.
+Please also read xenguest-network-bridge.md.

 ### Customize Dom0 and Xen boot arguments for you board
-xen-devicetree modifies the generated DTB Xen and Linux boot arguments,
-as long as the address where Dom0 Linux kernel can be found.
+xen-devicetree is writting inside the generated DTB Xen and Linux boot
+arguments as long as the address where Dom0 Linux kernel can be found.
 You might need to have different values for your board or depending on your
 use case.

@@ -1,34 +0,0 @@
-Customizing Arm Autonomy Host image layout for N1SDP
-====================================================
-
-When buiding with `DISTRO_FEATURES += "arm-autonomy-host"` the user can
-perform a couple of customizations in the generated wic image:
-
-1. Set the guest partition size (default: 4iG) via `GUEST_PART_SIZE` and
-   `GUEST_PART_SIZE_UNIT` (M or G) variables to be set in any conf file. The
-   value of these variables should be aligned with the sum of all
-   XENGUEST_IMAGE_DISK_SIZE set for the guests. By default, LVM2 metadata is
-   1 MiB per physical volume, hence it needs to be taken into account when
-   setting GUEST_PART_SIZE.
-
-2. Set the boot partition size (default: 100M) via `BOOT_PART_SIZE` and
-   `BOOT_PART_SIZE_UNIT` (M or G) variables in any conf file. The default
-   bootimg is ~44M so 100M leaves just over 50M of free space.
-
-3. The wic image partition layout and contents with a custom wks file via
-   `ARM_AUTONOMY_WKS_FILE` variable (default:
-   arm-autonomy-n1sdp-efidisk.wks.in which is affected by GUEST_PART_SIZE,
-   GUEST_PART_SIZE_UNIT, BOOT_PART_SIZE, BOOT_PART_SIZE_UNIT and
-   GRUB_CFG_FILE variables).
-
-4. Custom grub.cfg file via `GRUB_CFG_FILE` (default:
-   arm-autonomy-n1sdp-grub.cfg) variable to be set in any conf file. The full
-   path or relative to `ARM_AUTONOMY_WKS_FILE` should be set.
-
-The `arm-autonomy-n1sdp-efidisk.wks.in` and `arm-autonomy-n1sdp-grub.cfg` files
-are located at `meta-arm-autonomy/dynamic-layers/meta-arm-bsp/wic`.
-
-Other variables can also be customized to set what files need to be included
-in the wic image boot partition. Please refer to
-`meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/n1sdp-extra-settings.inc`
-for more details.
@@ -56,8 +56,7 @@ The following parameters are available:
  the xen devicetrees are properly regenerated if the source DTBs are changed.
  This variable is set by default to "virtual/kernel:do_deploy" to use DTBs
  generated during the compilation of the Linux kernel. This must be changed
-  if the machine you are using is not using a DTB listed in
-  KERNEL_DEVICETREE.
+  if the machine your are using is not using a DTB listed in KERNEL_DEVICETREE.

 - XEN_DEVICETREE_DTBS: This should be set to the list of DTBs you want to be
  modified by xen-devicetree. Those must be files that xen-devicetree can find
@@ -71,10 +70,7 @@ The following parameters are available:
  This variable is only used if XEN_DEVICETREE_XEN_BOOTARGS has a value
  containing "dom0_mem=${XEN_DEVICETREE_DOM0_MEM}" as the memory assigned to
  dom0 is defined using Xen boot arguments.
-  This variable is set by default to "1024M,max:1024", and cannot be empty.
-  The value can simply specify a size, e.g. "1024M", but best practice is to
-  also provide a max, documented here:
-  https://wiki.xenproject.org/wiki/Xen_Project_Best_Practices
+  This variable is set by default to "1024M".

 - XEN_DEVICETREE_DOM0_BOOTARGS: Boot arguments to pass to Dom0 Linux when
  booting it.
@@ -88,8 +84,7 @@ The following parameters are available:
 - XEN_DEVICETREE_DOM0_ADDR: This is the address from which the Linux kernel to
  be used for Dom0 will be copied. When using u-boot, this is the address at
  which you will load the kernel Image before starting Xen.
-  This variable is set by default to "0x80080000", and cannot be empty.
-  Values for this variable can be in hex (prefixed with '0x') or in decimal.
+  This variable is set by default to "0x80080000".

 - XEN_DEVICETREE_DOM0_SIZE: This is the size of the kernel loaded at
  ${XEN_DEVICETREE_DOM0_ADDR}. Xen will copy this amount of data inside the
@@ -97,8 +92,7 @@ The following parameters are available:
  size but can be bigger. You must be careful not to have a value too big as it
  could slow down boot or copy other parts with it (like the DTB).
  You might need to increase this if you use a kernel with a bundled initramfs.
-  This variable is set by default to "0x01000000" and cannot be empty.
-  Values for this variable can be in hex (prefixed with '0x') or in decimal.
+  This variable is set by default to "0x01000000".

 - XEN_DEVICETREE_DTSI_MERGE: This variable contains the list of dtsi files that
  must be included inside the generated DTB file. By default the only one
@@ -7,7 +7,7 @@ Introduction
 xenguest-manager is a tool to manage Xenguest images generated by
 [xenguest-mkimage](xenguest-mkimage.md).

-On a Xen Dom0 system it can:
+On a Xen Dom0 system it will:
 - create a xen guest from a xenguest image: extract its components, create a
  disk for the guest using LVM volumes.
 - start/stop a xen guest (during init or using xenguest-manager directly).
@@ -23,7 +23,7 @@ Usage
 -----

 xenguest-manager must be called like this:
-`xenguest-manager [-v(v)] OPERATION [OPTIONS]`
+`xenguest-manager OPERATION [OPTIONS]`
 The following operations are available:
 - create XENGUEST_IMAGE [GUESTNAME]: create a guest from a xenguest image file
  as guest GUESTNAME. If GUESTNAME is not given the image file name is used
@@ -37,9 +37,6 @@ The following operations are available:
 - status [GUESTNAME]: print the current status of GUESTNAME. If GUESTNAME is
  not given, print the status of all guests.

-Passing -v or -vv will increase the logging written to the logfile.
-The terminal will always show only error messages, regardless of the logfile.
-
 For a detailed help on available options please use:
 `xenguest-manager --help`

@@ -48,20 +45,19 @@ Bitbake parameters

 Several parameters are available to configure the xenguest manager during Yocto
 project compilation (those can be set in your project local.conf, for example).
-This config will be written to a file xenguest-manager.conf in /etc/xenguest/.

 The following parameters are available:

- XENGUEST_MANAGER_VOLUME_DEVICE: This is the device path used by the
+- XENGUEST_MANAGER_VOLUME_DEVICE: This is the device path used by the 
  xenguest-manager on the device to create LVM disks when guests have a disk
  configuration.
  This is set by default to "/dev/sda2".

- XENGUEST_MANAGER_VOLUME_NAME: This is the LVM volume name that the
+- XENGUEST_MANAGER_VOLUME_NAME: This is the LVM volume name that the 
  xenguest-manager will create and use to create guest LVM disks.
  This is set by default to "vg-xen".

- XENGUEST_MANAGER_GUEST_DIR: This is the directory on Dom0 where the
+- XENGUEST_MANAGER_GUEST_DIR: This is the directory on Dom0 where the 
  xenguest-manager will look for xenguest images to create during init. That's
  the place where xenguest images can be added to have them automatically
  created during next Dom0 boot. The xenguests found there will only be created
@@ -69,76 +65,3 @@ The following parameters are available:
  name).
  This is set by default to "/usr/share/guests".

- XENGUEST_MANAGER_LOG_LEVEL: Set the default log level for xenguest manager.
-  Must be one of ERROR, INFO, VERBOSE (default: ERROR). The logs will be
-  written to /var/log/xenguest.
-
-  If a verbosity argument (-v or -vv) is passed to xenguest-manager directly, it
-  will override the setting in xenguest-manager.conf
-
-  Since /var/log is by default a volatile location, extra configuration is
-  required if logs are desired to be kept between reboots:
-    VOLATILE_LOG_DIR="no"
-
-  Read more here: https://www.yoctoproject.org/docs/latest/mega-manual/mega-manual.html#var-VOLATILE_LOG_DIR
-
-  When this is enabled, logrotate will monitor the file to ensure it does not
-  grow excessively large. See recipes-extended/xenguest/files/logrotate-xenguest
-
-Init scripts
------------
-
-Shell scripts can be executed on the host when a guest is started. Depending on
-when the script should be executed it should be installed in a different
-directory on the target:
-
- /etc/xenguest/init.pre  : Executed first, prior to guest creation
-
- /etc/xenguest/init.d    : Executed after guest creation, but before it is started
-
- /etc/xenguest/init.post : Executed after starting the guest
-
-Inside the directory, scripts will be executed in alphabetical order.
-
-Since these scripts are sourced by xenguest-manager, they can acccess functions
-and variables from the parent file's scope, including:
-
- ${guestname}    : The name of the guest being created
-
- ${guestdir}     : The path to the guest directory
-
- ${guestcfgfile} : The name of the config file for the starting guest
-
- log()           : Used to write a log to the logfile, default level INFO.
-                    Takes an optional log level and a message body
-                    e.g. log ERROR "blah"
-
-                    Options for log level: ERROR, INFO, VERBOSE,
-                    and FATAL which will call exit 1 immediately after logging
-                    the message at level ERROR.
-
- log_command()   : Used to call a shell command and log that it has been
-                    called, as well as capturing both stdout and stderr.
-
-                    By default the command output is dumped to the logfile as an
-                    error if the command returns a status > 0, or as a verbose
-                    message if the whole script is running in verbose mode.
-
-                    An optional log level can be passed to alter the level the
-                    log should be if the command returns a status >0, which may
-                    be useful if the command is expected to return a non-zero
-                    result.
-                    e.g. log_command INFO "ls -lh ~"
-
-                    Options for log level: ERROR, INFO, and VERBOSE
-
-Attempting to call any other functions from xenguest_manager in an init script
-may result in a fatal error, from which cleanup is not guarenteed.
-
-
-Init scripts also have access to config variables defined in params.cfg.
-
-An example of how to create the directory and install an init shell script can
-be found in:
-  recipes-extended/xenguest/xenguest-network.bb
-Where network-bridge.sh is installed from network-bridge.sh.in
@@ -4,9 +4,9 @@ Xenguest mkimage
 Introduction
 ------------

-xenguest-mkimage is a tool to create and modify images to be used as a Guest
-with Xen. It defines a format to store completely defined guests as a file or as
-a directory, and provides options to create and modify those images.
+xenguest-mkimage is a tool to create and modify images to be used as Guest with
+Xen. It defines a format to store completely defined guests as a file or as
+a directory and provides options to create and modify those images.

 A xenguest image contains all elements required to create a xen guest.
 This is the base elements like a Xen configuration and a Linux kernel binary
@@ -15,8 +15,8 @@ but also some more advanced elements like init scripts or a disk definition.
 The format is made to be deployable easily by storing everything in a single
 file and provide tools to easily manipulate the images. It can also easily be
 extended to have features like encryption or signature of images, updates or
-complex configurations by providing the ability to have init scripts embedded
-inside the image that will be executed on the host when the guest is started.
+complex configurations by providing features to have init script that will be
+executed on the host embedded inside the image.

 Xenguest images content
 -----------------------
@@ -35,7 +35,7 @@ before starting the guest.

 ### files
 This directory contains files that can be used by the xen configuration, for
-example the kernel image referenced in xen configuration.
+example the binary of the kernel referenced in xen configuration).
 This is where the kernel binary, the dtb or a ramdisk will be stored.

 ### init.pre, init.d and init.post
@@ -47,7 +47,7 @@ contains scripts called at a different time:
     generate part of the xen configuration dynamically.
 - init.d: scripts executed when the guest has been created but before it is
     started. This can be used to do some xenstore operations or configure the
-     guest behaviour, using xl for example.
+     guest behaviour using xl, for example.
 - init.post: scripts executed just after starting the guest. This can be
     used to configure things created by xen for the guest like network
     network interfaces.
@@ -58,19 +58,12 @@ order.
 ### disk.cfg and disk-files
 disk.cfg contains the guest disk description (disk size and disk partitions).
 The file contains the following entries:
- `DISK_SIZE=X`: size of the disk to create in MB or GB(default),
-   e.g. 1000M or 4[G]
+- `DISK_SIZE=X`: size of the disk to create in GB
 - `DISK_PARTX=SIZE:FS:CONTENT`: create a partition number X (1 to 4) with a
-  size of SIZE MB or GB(default), e.g 1000M or 2[G].
-  Format it with filesystem FS (can be ext2, ext3, ext4, vfat or swap)
-  and extract CONTENT as initial partition content (.tar[.gz|.xz|.bz2] file
-  or img[.gz|.bz2] file to be dumped in the partition).
-  FS and CONTENT can be empty.
- `DISK_DEVICE=X`: disk or partition to be used by lvm. Setting this option
-  allows to bind guest disk with any partition or disk available on host,
-  e.g. /dev/sda3 or /dev/sdb.
-  This variable is not set by default, but if set, it overrides disk settings
-  inside xenguest-manager.conf - 'XENGUEST_VOLUME_DEVICE'.
+  size of SIZE GB, format it with filesystem FS (can be ext2, ext3, ext4, vfat
+  or swap) and extract CONTENT as initial partition content
+  (.tar[.gz|.xz|.bz2] file or img[.gz|.bz2] file to be dumped in the partition). FS and
+  CONTENT can be empty.

 The disk-files contain files to be used for initializing the disk partitions
 content. Those should be used to create a LVM or a physical disk and initialize
@@ -106,18 +99,16 @@ For a detailed help on available operations, please use:
  times to add several command line options.
 - --xen-device-tree=FILE: add dtb FILE as device tree. This both adding the
  file to the image and modifying the xen configuration to use it.
- --xen-ramdisk=FILE: add ramdisk FILE as guest ramdisk. This both adding the
-  file to the image and modifying the xen configuration to use it.
 - --init-script=FILE: add guest init script. The script is embedded inside the
  image file. Several script can be added and the basename of FILE is used to
  distinguish them (calling the option twice with the same file will update the
  script in the image with the second one).
- --disk-size=SIZE: set the guest disk size to SIZE in MB or GB(default),
-   e.g 1000M or 2[G]. Calling this with 0 disable the guest disk.
+ --disk-size=SIZE: set the guest disk size to SIZE in GB. Calling this with 0
+  disable the guest disk.
 - --disk-add-part=NUM:SIZE:FS:CONTENT: This is adding a partition to the
  xenguest image disk. The partition is described with the arguments:
  - NUM: partition number.
-  - SIZE: partition size in MB or GB(default), e.g 1000M or 2[G].
+  - SIZE: partition size in GB.
  - FS: filesystem to format the partition with. This can be ext2, ext3, ext4,
    vfat of swap. If empty the partition is not formated.
  - CONTENT: tar of img file to use to initialize the partition. The file must
@@ -0,0 +1,49 @@
+xenguest network bridge
+=======================
+
+Introduction
+------------
+
+xenguest-network-bridge is creating a network bridge to allow some guests to
+have a direct connection to the external network.
+To do this, a bridge is created on the host using brctl with the network
+interfaces added to it so that the bridge is connected to the external network.
+It is also adding a guest init script which will, for guests configured to use
+it, create a virtual network interface for the guest and connect it to the
+network bridge on the host.
+
+Usage
+-----
+
+On the host the package xenguest-network-bridge must be included in your image.
+
+On the xenguest image of your guest, the parameter NETWORK_BRIDGE must be set
+to 1 (using xenguest-mkimage --set-param=NETWORK_BRIDGE=1).
+
+Bitbake parameters
+------------------
+Several parameters are available to configure the xenguest network bridge
+during Yocto project compilation (those can be set in your project local.conf,
+for example).
+
+The following parameters are available:
+
+- XENGUEST_NETWORK_BRIDGE_NAME: This variable defines the name of the network
+  bridge that is created on the host during init.
+  This is set by default to "xenbr0".
+
+- XENGUEST_NETWORK_BRIDGE_MEMBERS: This variable defines the list of network
+  interfaces that are added to the bridge when it is created on the host during
+  init.
+  This is set by default to "eth0".
+
+- XENGUEST_NETWORK_BRIDGE_CONFIG: This variable defines the configuration file
+  to use to configure the bridge network. By default it points to have file
+  configuring the network using dhcp.
+  You can provide a different file using a bbappend and make this variable
+  point to it if you want to customize your network configuration.
+
+- XENGUEST_IMAGE_NETWORK_BRIDGE: This variable can be set to 0 or 1 on guest
+  projects to enable or not the connection of the guest to the host bridge.
+  This is set by default to "1".
+
@@ -1,80 +0,0 @@
-Xenguest Network
-================
-
-Introduction
------------
-
-The xenguest-network package is primarly creating a network bridge to share
-the host eth physical interfaces with the guests virtual interfaces (vif).
-This way the guests can have access to the external network.
-
-At the moment 3 types of network arrangements are provided:
-
- Bridge: where the guest vif is added to the created bridge interface;
-
- NAT: where a private subnet is created for the guest,
-  a kea dhcp4 server is started on the host to serve the guest
-  and the proper iptables rules are created
-  to allow the guest to access the external network;
-
- None: the guest vif is not connected to the bridge.
-
-Usage
-----
-
-On the host project the package xenguest-network must be included in your
-image, and on the guest project the XENGUEST_NETWORK_TYPE needs to be set to
-"bridge", "nat" or "none".
-
-Bitbake parameters
------------------
-
-Several parameters are available to configure the xenguest network bridge
-during Yocto project compilation (those can be set in your project local.conf
-or xenguest-network.bbappend, for example).
-
-The following parameters are available:
-
- XENGUEST_NETWORK_BRIDGE_NAME: This variable defines the name of the network
-  bridge that is created on the host during init.
-  This is set by default to "xenbr0".
-
- XENGUEST_NETWORK_BRIDGE_MEMBERS: This variable defines the list of the
-  physical network interfaces that are added to the bridge when it is created
-  on the host during init.
-  By default no physical interfaces are added.
-
- XENGUEST_NETWORK_BRIDGE_CONFIG: This variable defines the configuration file
-  to use to configure the bridge network. By default it points to have file
-  configuring the network using dhcp.
-  You can provide a different file using a bbappend and make this variable
-  point to it if you want to customize your network configuration.
-
- XENGUEST_IMAGE_NETWORK_TYPE: This variable can be set to "bridge" (default),
-  "nat" or "none".
-  The **bridge** type will add the domU vif interface to a bridge which also
-  contains the dom0 physical interface giving the guest direct access to the
-  external network.
-  The **nat** type will setup a private network between dom0 and domU, setup
-  the appropriate routing table, configure and run the kea dhcp4 server
-  on dom0 to serve the domU and apply the iptables rules to allow the guest
-  to acess the external network. The kea dhcp4 server configuration for
-  the guest can be customised by replacing the
-  "meta-arm-autonomy/recipes-extended/xenguest/files/kea-subnet4.json" file
-  in a xenguest-network.bbappend. The kea-subnet4.json file is installed in
-  the xenguest image and copied to
-  "/etc/xenguest/guests/${guestname}/files/kea-subnet4.json" when the guest
-  image is created. It will be consumed by the
-  "/etc/xen/scripts/vif-post.d/00-vif-xenguest.hook" script which is called by
-  "/etc/xen/scripts/vif-nat" script when starting/stopping the xenguest.
-  After guest start, "/etc/xenguest/init.post/xenguest-network-init-post.sh"
-  script is called to reload kea dhcp4 server with updated configuration,
-  after virtual network interface is ready.
-  In the guest project, the NAT port forward can be customised by changing
-  the XENGUEST_IMAGE_HOST_PORT (default: "1000 + ${domid}") and
-  XENGUEST_IMAGE_GUEST_PORT (default: "22") variables in local.conf or
-  xenguest-base-image.bbappend. This configuration is implemented and installed
-  in "/etc/xenguest/guests/${guestname}/files/00-xenguest-nat-port-forward.hook"
-  script which is called by "/etc/xen/scripts/vif-post.d/00-vif-xenguest.hook".
-  The **none** type will not affect any networking setting between on dom0 and
-  domU.
@@ -1,7 +0,0 @@
-# Require extra machine specific settings
-ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE ?= ""
-ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE:n1sdp = "n1sdp-extra-settings.inc"
-ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE:fvp-base = "fvp-base-extra-settings.inc"
-ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE:juno = "juno-extra-settings.inc"
-
-require ${ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE}
@@ -1,39 +0,0 @@
-# Extra machine settings for fvp-base
-
-# FVP uses vda as hard drive and partition 1 is the
-# default rootfs, so use vda2 for guest lvm
-XENGUEST_MANAGER_VOLUME_DEVICE ?= "/dev/vda2"
-
-# We need to extend the wks search path to be able to find the wks file set in
-# ARM_AUTONOMY_WKS_FILE.
-WKS_SEARCH_PATH:prepend := "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic:"
-
-ARM_AUTONOMY_WKS_FILE ?= "arm-autonomy-fvp-base-disk.wks.in"
-# set wks file only if INITRAMFS_IMAGE_BUNDLE is not set
-WKS_FILE = "${@bb.utils.contains('INITRAMFS_IMAGE_BUNDLE', '1', '',\
-                                 '${ARM_AUTONOMY_WKS_FILE}', d)}"
-
-XEN_FILE ?= "xen-fvp-base"
-DTB_FILE ?= "${@ get_xen_dtb_filename(d)}"
-XEN_ADDR ?= "0x84000000"
-DTB_ADDR ?= "0x83000000"
-
-FVP_DATA    += "cluster0.cpu0=${DEPLOY_DIR_IMAGE}/${XEN_FILE}@${XEN_ADDR} \
-                cluster0.cpu0=${DEPLOY_DIR_IMAGE}/${DTB_FILE}@${DTB_ADDR}"
-
-# Set the wks guest partition size and unit. It must be aligned with the sum of
-# all XENGUEST_IMAGE_DISK_SIZE set for the guests. By default, LVM2 metadata is
-# 1 MiB per physical volume, hence it needs to be taken into account when
-# setting GUEST_PART_SIZE. The XENGUEST_IMAGE_DISK_SIZE default value is 4GiB.
-GUEST_PART_SIZE ?= "4097"
-GUEST_PART_SIZE_UNIT ?= "M"
-
-XENGUEST_NETWORK_BRIDGE_MEMBERS ?= "eth0"
-
-# This function uses the "KERNEL_DEVICETREE" variable and manipulates it to
-# return the xen kernel device tree file name.
-def get_xen_dtb_filename(d):
-    kernel_dtb_filename = d.getVar('KERNEL_DEVICETREE',d)
-    xen_dtb_filename = os.path.splitext(os.path.basename(kernel_dtb_filename))[0] + '-xen.dtb'
-    return xen_dtb_filename
-
@@ -1,26 +0,0 @@
-# Extra machine settings for juno
-KERNEL_ALT_IMAGETYPE = "Image.lzma"
-
-# Juno board has 2 network interfaces, add both of them to the bridge
-XENGUEST_NETWORK_BRIDGE_MEMBERS ?= "eth0 eth1"
-XEN_DEVICETREE_DOM0_SIZE ?= "0x02400000"
-
-# We need to extend the wks search path to be able to find the wks file set in
-# ARM_AUTONOMY_WKS_FILE.
-WKS_SEARCH_PATH:prepend := "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic:"
-
-ARM_AUTONOMY_WKS_FILE ?= "arm-autonomy-juno-disk.wks.in"
-# set wks file only if INITRAMFS_IMAGE_BUNDLE is not set
-WKS_FILE = "${@bb.utils.contains('INITRAMFS_IMAGE_BUNDLE', '1', '',\
-                                 '${ARM_AUTONOMY_WKS_FILE}', d)}"
-
-# Set the wks guest partition size and unit. It must be aligned with the sum of
-# all XENGUEST_IMAGE_DISK_SIZE set for the guests. By default, LVM2 metadata is
-# 1 MiB per physical volume, hence it needs to be taken into account when
-# setting GUEST_PART_SIZE. The XENGUEST_IMAGE_DISK_SIZE default value is 4GiB.
-GUEST_PART_SIZE ?= "4097"
-GUEST_PART_SIZE_UNIT ?= "M"
-
-# set wic image type only if INITRAMFS_IMAGE_BUNDLE is not set
-IMAGE_FSTYPES += "${@bb.utils.contains('INITRAMFS_IMAGE_BUNDLE', '1', '',\
-                                       'wic wic.gz wic.bmap', d)}"
@@ -1,94 +0,0 @@
-# Extra machine settings for n1sdp
-
-# We need to extent the wks search path to be able to find the wks file set in
-# ARM_AUTONOMY_WKS_FILE.
-WKS_SEARCH_PATH:prepend := "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic:"
-
-ARM_AUTONOMY_WKS_FILE ?= "arm-autonomy-n1sdp-efidisk.wks.in"
-WKS_FILE = "${ARM_AUTONOMY_WKS_FILE}"
-
-# Set the wks guest partition size and unit. It must be aligned with the sum of
-# all XENGUEST_IMAGE_DISK_SIZE set for the guests. By default, LVM2 metadata is
-# 1 MiB per physical volume, hence it needs to be taken into account when
-# setting GUEST_PART_SIZE. The XENGUEST_IMAGE_DISK_SIZE default value is 4GiB.
-GUEST_PART_SIZE ?= "4097"
-GUEST_PART_SIZE_UNIT ?= "M"
-
-# Set default boot partition size and unit
-BOOT_PART_SIZE ?= "100"
-BOOT_PART_SIZE_UNIT ?= "M"
-
-# The GRUB_CFG_FILE affects arm-autonomy-n1sdp-efidisk.wks.in file
-#
-# When alternate-kernel DISTRO_FEATURE is present we set the
-# arm-autonomy-n1sdp-rt-grub.cfg by default. This GRUB config file has
-# additional entries for booting with the PREEMPT_RT kernel.
-GRUB_CFG_FILE ?= "${@bb.utils.contains('DISTRO_FEATURES','alternate-kernel', \
-                     '${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic/arm-autonomy-n1sdp-rt-grub.cfg', \
-                     '${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic/arm-autonomy-n1sdp-grub.cfg' \
-                     , d)}"
-
-# From arm-autonomy-n1sdp-efidisk.wks.in, the /boot partition is /dev/sda1, and
-# the "/" partition is /dev/sda2.
-XENGUEST_MANAGER_VOLUME_DEVICE ?= "/dev/sda3"
-
-XENGUEST_NETWORK_BRIDGE_MEMBERS ?= "eth0"
-
-# The XEN_DEVICETREE_DEPEND and XEN_DEVICETREE_DTBS variables aftect the
-# xen-devicetree.bb recipe
-XEN_DEVICETREE_DEPEND = "virtual/trusted-firmware-a:do_deploy"
-XEN_DEVICETREE_DTBS ?= "n1sdp-single-chip.dtb"
-# XEN_MOD_DEVICETREE_DTBS are the generated devicetrees for Xen. By default the
-# xen-devicetree.bb recipe adds '-xen' suffix to it
-XEN_MOD_DEVICETREE_DTBS ?= "n1sdp-single-chip-xen.dtb"
-
-# When generating the wic image we need to have the xen deployed
-do_image_wic[depends] += "xen:do_deploy"
-
-# Select the extra files to be included in the boot partition
-IMAGE_EFI_BOOT_FILES += "xen-n1sdp.efi;xen.efi"
-IMAGE_EFI_BOOT_FILES += "${XEN_MOD_DEVICETREE_DTBS}"
-
-# When alternate-kernel DISTRO_FEATURE is present we set the linux-yocto-rt
-# by default
-PREFERRED_PROVIDER_alternate/kernel ?= "\
-${@bb.utils.contains('DISTRO_FEATURES', 'alternate-kernel', \
-'linux-yocto-rt', '', d)}"
-
-KERNEL_PACKAGE_NAME_alternate/kernel ?= "kernel-rt"
-# When alternate-kernel DISTRO_FEATURE is present we set the kernel-rt by
-# default
-KERNEL_PACKAGE_NAME:pn-linux-yocto-rt = "\
-${@ d.getVar('KERNEL_PACKAGE_NAME_alternate/kernel') \
-if bb.utils.contains('DISTRO_FEATURES', 'alternate-kernel', True, False, d) \
-else 'kernel' }"
-
-# Relative path from DEPLOY_DIR_IMAGE of the Kernel PREEMPT_RT deployed Image
-KERNEL_RT_IMAGE ?= "kernel-rt/Image-n1sdp.bin;Image-preempt-rt"
-# Only include the Kernel PREEMPT_RT Image if we are building with
-# alternate-kernel DISTRO_FEATURE
-IMAGE_EFI_BOOT_FILES += "\
-${@ d.getVar('KERNEL_RT_IMAGE',d) or '' \
-if bb.utils.contains('DISTRO_FEATURES', 'alternate-kernel', True, False, d) and \
-d.getVar('PREFERRED_PROVIDER_alternate/kernel') else ''}"
-
-
-EFIDIR ?= "/EFI/BOOT"
-GRUB_CFG_EXTRA_FILE ?= "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic/arm-autonomy-n1sdp-grub.cfg;.${EFIDIR}}"
-
-# When alternate-kernel DISTRO_FEATURE is present we set the
-# arm-autonomy-n1sdp-rt-grub.cfg by default. This GRUB config file has
-# additional entries for booting with the PREEMPT_RT kernel and also includes
-# the main GRUB config file set by GRUB_CFG_EXTRA_FILE.
-IMAGE_EFI_BOOT_FILES += "\
-${@ d.getVar('GRUB_CFG_EXTRA_FILE',d) or '' \
-if bb.utils.contains('DISTRO_FEATURES', 'alternate-kernel', True, False, d) and \
-d.getVar('PREFERRED_PROVIDER_alternate/kernel') else ''}"
-
-# Additionnal kernel modules are necessary for n1sdp to be able to mount FAT
-# filesystems using CP437.
-MACHINE_ESSENTIAL_EXTRA_RDEPENDS:append = " kernel-module-nls-cp437 kernel-module-nls-iso8859-1"
-
-# '-mcpu=' and '-march=' conflicts for xen build
-# lets not set '-march=' and let xen to overwrite '-mcpu='
-TUNE_CCARGS:remove:pn-xen = "${TUNE_CCARGS_MARCH}${TUNE_CCARGS_MARCH_OPTS}"
@@ -1,6 +1,6 @@
 # Use OVERRIDES to minimize the usage of
 # ${@bb.utils.contains('DISTRO_FEATURES', 'xen', ...
-OVERRIDES:append = "${@bb.utils.contains('DISTRO_FEATURES', 'xen', ':xen', '', d)}"
+OVERRIDES_append = "${@bb.utils.contains('DISTRO_FEATURES', 'xen', ':xen', '', d)}"

 # Xen image to put in the image
 # This should point to a file in the deploy image directory
@@ -9,21 +9,21 @@ BOOT_WRAPPER_AARCH64_XEN ??= "xen-${MACHINE}"
 # Xen command line for the image
 BOOT_WRAPPER_AARCH64_XEN_CMDLINE ??= "noreboot dom0_mem=256M"

-BOOT_WRAPPER_AARCH64_XEN_CMDLINE:gem5-arm64 = "noreboot dom0_mem=256M console=dtuart \
+BOOT_WRAPPER_AARCH64_XEN_CMDLINE_gem5-arm64 = "noreboot dom0_mem=256M console=dtuart \
    dtuart=/uart@1c090000 bootscrub=0"

 # Fix command line in the axf file for gem5-arm64 when Xen is present
-BOOT_WRAPPER_AARCH64_CMDLINE_xen:gem5-arm64 = "console=hvc0 root=/dev/vda rw"
+BOOT_WRAPPER_AARCH64_CMDLINE_xen_gem5-arm64 = "console=hvc0 root=/dev/vda rw"

 # Image generated by boot wrapper when Xen is present
-BOOT_WRAPPER_AARCH64_IMAGE:xen ?= "xen-system.axf"
+BOOT_WRAPPER_AARCH64_IMAGE_xen ?= "xen-system.axf"

-EXTRA_OECONF:append:xen = " \
+EXTRA_OECONF_append_xen = " \
 --with-xen=${WORKDIR}/kernel/arch/arm64/boot/Image \
 --with-xen-cmdline="" \
 "

-EXTRA_OEMAKE:append:xen = " \
+EXTRA_OEMAKE_append_xen = " \
 XEN_IMAGE=${DEPLOY_DIR_IMAGE}/${BOOT_WRAPPER_AARCH64_XEN} \
 XEN_CMDLINE="${BOOT_WRAPPER_AARCH64_XEN_CMDLINE}" \
 "
@@ -1,50 +1,21 @@
 # Use OVERRIDES to minimize the usage of
-# ${@bb.utils.contains('DISTRO_FEATURES', 'autonomy-host', ...
-OVERRIDES:append = "${ARM_AUTONOMY_HOST_OVERRIDES}"
+# ${@bb.utils.contains('DISTRO_FEATURES', 'xen', ...
+OVERRIDES_append = "${@bb.utils.contains('DISTRO_FEATURES', 'xen', ':xen', '', d)}"

-FILESEXTRAPATHS:prepend:autonomy-host := "${THISDIR}/${PN}:"
-
-DEPENDS:append:autonomy-host = " dos2unix-native"
-
-SRC_URI:append:autonomy-host = " file://add-xen-support.patch;patchdir=../"
-
-do_install:append:autonomy-host() {
-    mv -v ${D}/${UNPACK_DIR}/SOFTWARE/uEnv.txt \
-          ${D}/${UNPACK_DIR}/SOFTWARE/uenvfile
-    for dir in $(ls ${D}/${UNPACK_DIR}/SITE1/)
-    do
-        unix2dos ${D}/${UNPACK_DIR}/SITE1/${dir}/images.txt
-    done
-}
+FILESEXTRAPATHS_prepend_xen := "${THISDIR}/${PN}:"

 DEPLOY_EXTRA_DEPS ??= ""
-DEPLOY_EXTRA_DEPS:autonomy-host = "xen:do_deploy xen-devicetree:do_deploy"
+DEPLOY_EXTRA_DEPS_xen = "xen:do_deploy xen-devicetree:do_deploy"

 do_deploy[depends] += "${DEPLOY_EXTRA_DEPS}"

-do_deploy:prepend:autonomy-host() {
+do_deploy_prepend_xen() {
    # To avoid dependency loop between firmware-image-juno:do_install,
    # xen:do_deploy and xen-devicetree:do_deploy when
    # INITRAMFS_IMAGE_BUNDLE = "1", we need to handle the xen and
    # xen-devicetree binaries copying in the do_deploy task.
-
-    mkdir -p ${D}/${UNPACK_DIR}/SOFTWARE/XEN
-    cp  -v ${DEPLOY_DIR_IMAGE}/xen-${COMPATIBLE_MACHINE}.efi \
-        ${D}/${UNPACK_DIR}/SOFTWARE/XEN/xen
-
-    for dtb in $(basename -s .dtb ${KERNEL_DEVICETREE})
-    do
-        cp -v ${DEPLOY_DIR_IMAGE}/${dtb}-xen.dtb \
-            ${D}/${UNPACK_DIR}/SOFTWARE/XEN/${dtb}.dtb
-    done
-
-    bbnote "Xen binaries added under SOFTWARE/XEN directory"
-
-    if [ "${INITRAMFS_IMAGE_BUNDLE}" != "1" -a "${KERNEL_ALT_IMAGETYPE}" = "Image.lzma" ]; then
-        # KERNEL_ALT_IMAGETYPE is expected to be Image.lzma,
-        # however NOR flash filesystem is DOS compatible with 8.3 naming,
-        # so we need to replace ".lzma" with ".lzm"
-        cp -L -f ${DEPLOY_DIR_IMAGE}/${KERNEL_ALT_IMAGETYPE} \
-                 ${D}/${UNPACK_DIR}/SOFTWARE/Image.lzm
-    fi
+    cp  ${DEPLOY_DIR_IMAGE}/xen-${COMPATIBLE_MACHINE}.efi \
+        ${D}/${UNPACK_DIR}/SOFTWARE/xen
+    cp ${DEPLOY_DIR_IMAGE}/*xen.dtb \
+        ${D}/${UNPACK_DIR}/SOFTWARE/
 }
@@ -1,173 +0,0 @@
-arm-bsp/firmware-image-juno: add xen support
-
-This patch adds xen and dtbs binaries entries to images-r[012].txt files.
-These images-r[012].txt files contain NOR filesystem entries details,
-like file offset, name, path etc.
-
-It also adds customization for uEnv.txt file, that allows to autoboot xen.
-
-Upstream-Status: Inappropriate [configuration]
-Signed-off-by: Kamil Dziezyk <kamil.dziezyk@arm.com>
-
-diff -u a/images-r0.txt b/images-r0.txt
--- a/images-r0.txt	2020-11-25 20:25:38.677687712 +0100
-+++ b/images-r0.txt	2020-11-25 20:36:55.482194294 +0100
-@@ -1,7 +1,7 @@
- TITLE: Versatile Express Images Configuration File
- 
- [IMAGES]
-TOTALIMAGES: 10                  ;Number of Images (Max: 32)
-+TOTALIMAGES: 11                  ;Number of Images (Max: 32)
- 
- NOR0UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR0ADDRESS: 0x00000000          ;Image Flash Address
-@@ -17,14 +17,14 @@
- 
- NOR2UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR2ADDRESS: 0x00500000          ;Image Flash Address
-NOR2FILE: \SOFTWARE\Image        ;Image File Name
-NOR2NAME: norkern                ;Rename kernel to norkern
-+NOR2FILE: \SOFTWARE\Image.lzm    ;Image File Name
-+NOR2NAME: norkern.lzm            ;Rename kernel to norkern.lzm
- NOR2LOAD: 00000000               ;Image Load Address
- NOR2ENTRY: 00000000              ;Image Entry Point
- 
- NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR3ADDRESS: 0x02900000          ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno.dtb     ;Image File Name
-+NOR3FILE: \SOFTWARE\XEN\juno.dtb ;Image File Name
- NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
- NOR3LOAD: 00000000               ;Image Load Address
- NOR3ENTRY: 00000000              ;Image Entry Point
-@@ -64,8 +64,13 @@
- NOR9UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR9ADDRESS: 0x02A80000          ;Image Flash Address
- NOR9NAME: uEnv.txt
-NOR9FILE: \SOFTWARE\uEnv.txt     ;Image File Name
-+NOR9FILE: \SOFTWARE\uenvfile     ;Image File Name
- NOR9LOAD: 00000000               ;Image Load Address
- NOR9ENTRY: 00000000              ;Image Entry Point
- 
-
-+NOR10UPDATE: AUTO                ;Image Update:NONE/AUTO/FORCE
-+NOR10ADDRESS: 0x03000000         ;Image Flash Address
-+NOR10FILE: \SOFTWARE\XEN\xen     ;Image File Name
-+NOR10NAME: xen
-+NOR10LOAD: 00000000              ;Image Load Address
-+NOR10ENTRY: 00000000             ;Image Entry Point
-diff -u a/images-r1.txt b/images-r1.txt
--- a/images-r1.txt	2020-11-25 20:40:19.005177152 +0100
-+++ b/images-r1.txt	2020-11-25 20:41:17.500886263 +0100
-@@ -1,7 +1,7 @@
- TITLE: Versatile Express Images Configuration File
- 
- [IMAGES]
-TOTALIMAGES: 10                  ;Number of Images (Max: 32)
-+TOTALIMAGES: 11                  ;Number of Images (Max: 32)
- 
- NOR0UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR0ADDRESS: 0x00000000          ;Image Flash Address
-@@ -17,14 +17,14 @@
- 
- NOR2UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR2ADDRESS: 0x00500000          ;Image Flash Address
-NOR2FILE: \SOFTWARE\Image        ;Image File Name
-NOR2NAME: norkern                ;Rename kernel to norkern
-+NOR2FILE: \SOFTWARE\Image.lzm    ;Image File Name
-+NOR2NAME: norkern.lzm            ;Rename kernel to norkern.lzm
- NOR2LOAD: 00000000               ;Image Load Address
- NOR2ENTRY: 00000000              ;Image Entry Point
- 
- NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR3ADDRESS: 0x02900000          ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno-r1.dtb  ;Image File Name
-+NOR3FILE: \SOFTWARE\XEN\juno-r1.dtb ;Image File Name
- NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
- NOR3LOAD: 00000000               ;Image Load Address
- NOR3ENTRY: 00000000              ;Image Entry Point
-@@ -64,8 +64,13 @@
- NOR9UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR9ADDRESS: 0x02A80000          ;Image Flash Address
- NOR9NAME: uEnv.txt
-NOR9FILE: \SOFTWARE\uEnv.txt     ;Image File Name
-+NOR9FILE: \SOFTWARE\uenvfile     ;Image File Name
- NOR9LOAD: 00000000               ;Image Load Address
- NOR9ENTRY: 00000000              ;Image Entry Point
- 
-
-+NOR10UPDATE: AUTO                ;Image Update:NONE/AUTO/FORCE
-+NOR10ADDRESS: 0x03000000         ;Image Flash Address
-+NOR10FILE: \SOFTWARE\XEN\xen     ;Image File Name
-+NOR10NAME: xen
-+NOR10LOAD: 00000000              ;Image Load Address
-+NOR10ENTRY: 00000000             ;Image Entry Point
-diff -u a/images-r2.txt b/images-r2.txt
--- a/images-r2.txt	2020-11-25 20:40:30.625119321 +0100
-+++ b/images-r2.txt	2020-11-25 20:41:30.720820597 +0100
-@@ -1,7 +1,7 @@
- TITLE: Versatile Express Images Configuration File
- 
- [IMAGES]
-TOTALIMAGES: 10                  ;Number of Images (Max: 32)
-+TOTALIMAGES: 11                  ;Number of Images (Max: 32)
- 
- NOR0UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR0ADDRESS: 0x00000000          ;Image Flash Address
-@@ -17,14 +17,14 @@
- 
- NOR2UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR2ADDRESS: 0x00500000          ;Image Flash Address
-NOR2FILE: \SOFTWARE\Image        ;Image File Name
-NOR2NAME: norkern                ;Rename kernel to norkern
-+NOR2FILE: \SOFTWARE\Image.lzm    ;Image File Name
-+NOR2NAME: norkern.lzm            ;Rename kernel to norkern.lzm
- NOR2LOAD: 00000000               ;Image Load Address
- NOR2ENTRY: 00000000              ;Image Entry Point
- 
- NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR3ADDRESS: 0x02900000          ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno-r2.dtb  ;Image File Name
-+NOR3FILE: \SOFTWARE\XEN\juno-r2.dtb ;Image File Name
- NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
- NOR3LOAD: 00000000               ;Image Load Address
- NOR3ENTRY: 00000000              ;Image Entry Point
-@@ -64,8 +64,13 @@
- NOR9UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
- NOR9ADDRESS: 0x02A80000          ;Image Flash Address
- NOR9NAME: uEnv.txt
-NOR9FILE: \SOFTWARE\uEnv.txt     ;Image File Name
-+NOR9FILE: \SOFTWARE\uenvfile     ;Image File Name
- NOR9LOAD: 00000000               ;Image Load Address
- NOR9ENTRY: 00000000              ;Image Entry Point
- 
-
-+NOR10UPDATE: AUTO                ;Image Update:NONE/AUTO/FORCE
-+NOR10ADDRESS: 0x03000000         ;Image Flash Address
-+NOR10FILE: \SOFTWARE\XEN\xen     ;Image File Name
-+NOR10NAME: xen
-+NOR10LOAD: 00000000              ;Image Load Address
-+NOR10ENTRY: 00000000             ;Image Entry Point
-diff -u a/uEnv.txt b/uEnv.txt
--- a/uEnv.txt	2020-11-20 13:48:31.845078690 +0100
-+++ b/uEnv.txt	2020-11-25 20:30:00.572306675 +0100
-@@ -1,11 +1,16 @@
-+xen_name=xen
-+xen_addr=0x84000000
- uenvcmd=run mybootcmd
-+kernel_alt_name=norkern.lzm
-+kernel_comp_addr_r=0x88080000
- mybootcmd=echo Loading custom boot command; \
- echo Loading kernel; \
- afs load ${kernel_name} ${kernel_addr_r} ; \
-if test $? -eq 1; then echo Loading ${kernel_alt_name} instead of ${kernel_name}; afs load ${kernel_alt_name} ${kernel_addr_r}; fi; \
-+if test $? -eq 1; then echo Loading ${kernel_alt_name} instead of ${kernel_name}; afs load ${kernel_alt_name} ${kernel_comp_addr_r}; lzmadec ${kernel_comp_addr_r} ${kernel_addr_r}; fi; \
- echo Loading device tree; \
- afs load  ${fdtfile} ${fdt_addr_r}; \
- if test $? -eq 1; then echo Loading ${fdt_alt_name} instead of ${fdtfile}; \
- afs load ${fdt_alt_name} ${fdt_addr_r}; fi; fdt addr ${fdt_addr_r}; fdt resize; \
-booti ${kernel_addr_r} - ${fdt_addr_r};
-
-+echo Loading Xen; \
-+afs load  ${xen_name} ${xen_addr}; \
-+if test $? -eq 0; then echo Booting Xen; bootefi ${xen_addr} ${fdt_addr_r}; fi;
-
@@ -0,0 +1,78 @@
+TITLE: Versatile Express Images Configuration File
+
+[IMAGES]
+TOTALIMAGES: 11                  ;Number of Images (Max: 32)
+
+NOR0UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR0ADDRESS: 0x00000000          ;Image Flash Address
+NOR0FILE: \SOFTWARE\fip.bin      ;Image File Name
+NOR0LOAD: 00000000               ;Image Load Address
+NOR0ENTRY: 00000000              ;Image Entry Point
+
+NOR1UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR1ADDRESS: 0x03EC0000          ;Image Flash Address
+NOR1FILE: \SOFTWARE\bl1.bin      ;Image File Name
+NOR1LOAD: 00000000               ;Image Load Address
+NOR1ENTRY: 00000000              ;Image Entry Point
+
+NOR2UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR2ADDRESS: 0x00500000          ;Image Flash Address
+NOR2FILE: \SOFTWARE\Image        ;Image File Name
+NOR2NAME: norkern                ;Rename kernel to norkern
+NOR2LOAD: 00000000               ;Image Load Address
+NOR2ENTRY: 00000000              ;Image Entry Point
+
+NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR3ADDRESS: 0x02700000          ;Image Flash Address
+NOR3FILE: \SOFTWARE\juno-xen.dtb ;Image File Name
+NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
+NOR3LOAD: 00000000               ;Image Load Address
+NOR3ENTRY: 00000000              ;Image Entry Point
+
+NOR4UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR4ADDRESS: 0x01D00000          ;Image Flash Address
+NOR4FILE: \SOFTWARE\xen          ;Image File Name
+NOR4NAME: xen
+NOR4LOAD: 00000000               ;Image Load Address
+NOR4ENTRY: 00000000              ;Image Entry Point
+
+NOR5UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR5ADDRESS: 0x025C0000          ;Image Flash Address
+NOR5FILE: \SOFTWARE\hdlcdclk.dat ;Image File Name
+NOR5LOAD: 00000000               ;Image Load Address
+NOR5ENTRY: 00000000              ;Image Entry Point
+
+NOR6UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR6ADDRESS: 0x03E40000          ;Image Flash Address
+NOR6FILE: \SOFTWARE\scp_bl1.bin  ;Image File Name
+NOR6LOAD: 00000000               ;Image Load Address
+NOR6ENTRY: 00000000              ;Image Entry Point
+
+NOR7UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR7ADDRESS: 0x0BF00000          ;Image Flash Address
+NOR7FILE: \SOFTWARE\startup.nsh  ;Image File Name
+NOR7NAME: startup.nsh
+NOR7LOAD: 00000000               ;Image Load Address
+NOR7ENTRY: 00000000              ;Image Entry Point
+
+NOR8UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR8ADDRESS: 0x0BFC0000          ;Image Flash Address
+NOR8FILE: \SOFTWARE\blank.img    ;Image File Name
+NOR8NAME: BOOTENV
+NOR8LOAD: 00000000               ;Image Load Address
+NOR8ENTRY: 00000000              ;Image Entry Point
+
+NOR9UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR9ADDRESS: 0x02600000          ;Image Flash Address
+NOR9FILE: \SOFTWARE\selftest     ;Image File Name
+NOR9LOAD: 00000000               ;Image Load Address
+NOR9ENTRY: 00000000              ;Image Entry Point
+
+NOR10UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR10ADDRESS: 0x02780000          ;Image Flash Address
+NOR10NAME: uEnv.txt
+NOR10FILE: \SOFTWARE\uEnv.txt     ;Image File Name
+NOR10LOAD: 00000000               ;Image Load Address
+NOR10ENTRY: 00000000              ;Image Entry Point
+
+
@@ -0,0 +1,78 @@
+TITLE: Versatile Express Images Configuration File
+
+[IMAGES]
+TOTALIMAGES: 11                  ;Number of Images (Max: 32)
+
+NOR0UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR0ADDRESS: 0x00000000          ;Image Flash Address
+NOR0FILE: \SOFTWARE\fip.bin      ;Image File Name
+NOR0LOAD: 00000000               ;Image Load Address
+NOR0ENTRY: 00000000              ;Image Entry Point
+
+NOR1UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR1ADDRESS: 0x03EC0000          ;Image Flash Address
+NOR1FILE: \SOFTWARE\bl1.bin      ;Image File Name
+NOR1LOAD: 00000000               ;Image Load Address
+NOR1ENTRY: 00000000              ;Image Entry Point
+
+NOR2UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR2ADDRESS: 0x00500000          ;Image Flash Address
+NOR2FILE: \SOFTWARE\Image        ;Image File Name
+NOR2NAME: norkern                ;Rename kernel to norkern
+NOR2LOAD: 00000000               ;Image Load Address
+NOR2ENTRY: 00000000              ;Image Entry Point
+
+NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR3ADDRESS: 0x02700000          ;Image Flash Address
+NOR3FILE: \SOFTWARE\juno-r1-xen.dtb  ;Image File Name
+NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
+NOR3LOAD: 00000000               ;Image Load Address
+NOR3ENTRY: 00000000              ;Image Entry Point
+
+NOR4UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR4ADDRESS: 0x01D00000          ;Image Flash Address
+NOR4FILE: \SOFTWARE\xen          ;Image File Name
+NOR4NAME: xen
+NOR4LOAD: 00000000               ;Image Load Address
+NOR4ENTRY: 00000000              ;Image Entry Point
+
+NOR5UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR5ADDRESS: 0x025C0000          ;Image Flash Address
+NOR5FILE: \SOFTWARE\hdlcdclk.dat ;Image File Name
+NOR5LOAD: 00000000               ;Image Load Address
+NOR5ENTRY: 00000000              ;Image Entry Point
+
+NOR6UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR6ADDRESS: 0x03E40000          ;Image Flash Address
+NOR6FILE: \SOFTWARE\scp_bl1.bin  ;Image File Name
+NOR6LOAD: 00000000               ;Image Load Address
+NOR6ENTRY: 00000000              ;Image Entry Point
+
+NOR7UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR7ADDRESS: 0x0BF00000          ;Image Flash Address
+NOR7FILE: \SOFTWARE\startup.nsh  ;Image File Name
+NOR7NAME: startup.nsh
+NOR7LOAD: 00000000               ;Image Load Address
+NOR7ENTRY: 00000000              ;Image Entry Point
+
+NOR8UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR8ADDRESS: 0x0BFC0000          ;Image Flash Address
+NOR8FILE: \SOFTWARE\blank.img    ;Image File Name
+NOR8NAME: BOOTENV
+NOR8LOAD: 00000000               ;Image Load Address
+NOR8ENTRY: 00000000              ;Image Entry Point
+
+NOR9UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR9ADDRESS: 0x02600000          ;Image Flash Address
+NOR9FILE: \SOFTWARE\selftest     ;Image File Name
+NOR9LOAD: 00000000               ;Image Load Address
+NOR9ENTRY: 00000000              ;Image Entry Point
+
+NOR10UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR10ADDRESS: 0x02780000          ;Image Flash Address
+NOR10NAME: uEnv.txt
+NOR10FILE: \SOFTWARE\uEnv.txt     ;Image File Name
+NOR10LOAD: 00000000               ;Image Load Address
+NOR10ENTRY: 00000000              ;Image Entry Point
+
+
@@ -0,0 +1,78 @@
+TITLE: Versatile Express Images Configuration File
+
+[IMAGES]
+TOTALIMAGES: 11                  ;Number of Images (Max: 32)
+
+NOR0UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR0ADDRESS: 0x00000000          ;Image Flash Address
+NOR0FILE: \SOFTWARE\fip.bin      ;Image File Name
+NOR0LOAD: 00000000               ;Image Load Address
+NOR0ENTRY: 00000000              ;Image Entry Point
+
+NOR1UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR1ADDRESS: 0x03EC0000          ;Image Flash Address
+NOR1FILE: \SOFTWARE\bl1.bin      ;Image File Name
+NOR1LOAD: 00000000               ;Image Load Address
+NOR1ENTRY: 00000000              ;Image Entry Point
+
+NOR2UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR2ADDRESS: 0x00500000          ;Image Flash Address
+NOR2FILE: \SOFTWARE\Image        ;Image File Name
+NOR2NAME: norkern                ;Rename kernel to norkern
+NOR2LOAD: 00000000               ;Image Load Address
+NOR2ENTRY: 00000000              ;Image Entry Point
+
+NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR3ADDRESS: 0x02700000          ;Image Flash Address
+NOR3FILE: \SOFTWARE\juno-r2-xen.dtb  ;Image File Name
+NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
+NOR3LOAD: 00000000               ;Image Load Address
+NOR3ENTRY: 00000000              ;Image Entry Point
+
+NOR4UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR4ADDRESS: 0x01D00000          ;Image Flash Address
+NOR4FILE: \SOFTWARE\xen          ;Image File Name
+NOR4NAME: xen
+NOR4LOAD: 00000000               ;Image Load Address
+NOR4ENTRY: 00000000              ;Image Entry Point
+
+NOR5UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR5ADDRESS: 0x025C0000          ;Image Flash Address
+NOR5FILE: \SOFTWARE\hdlcdclk.dat ;Image File Name
+NOR5LOAD: 00000000               ;Image Load Address
+NOR5ENTRY: 00000000              ;Image Entry Point
+
+NOR6UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR6ADDRESS: 0x03E40000          ;Image Flash Address
+NOR6FILE: \SOFTWARE\scp_bl1.bin  ;Image File Name
+NOR6LOAD: 00000000               ;Image Load Address
+NOR6ENTRY: 00000000              ;Image Entry Point
+
+NOR7UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR7ADDRESS: 0x0BF00000          ;Image Flash Address
+NOR7FILE: \SOFTWARE\startup.nsh  ;Image File Name
+NOR7NAME: startup.nsh
+NOR7LOAD: 00000000               ;Image Load Address
+NOR7ENTRY: 00000000              ;Image Entry Point
+
+NOR8UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR8ADDRESS: 0x0BFC0000          ;Image Flash Address
+NOR8FILE: \SOFTWARE\blank.img    ;Image File Name
+NOR8NAME: BOOTENV
+NOR8LOAD: 00000000               ;Image Load Address
+NOR8ENTRY: 00000000              ;Image Entry Point
+
+NOR9UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR9ADDRESS: 0x02600000          ;Image Flash Address
+NOR9FILE: \SOFTWARE\selftest     ;Image File Name
+NOR9LOAD: 00000000               ;Image Load Address
+NOR9ENTRY: 00000000              ;Image Entry Point
+
+NOR10UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+NOR10ADDRESS: 0x02780000          ;Image Flash Address
+NOR10NAME: uEnv.txt
+NOR10FILE: \SOFTWARE\uEnv.txt     ;Image File Name
+NOR10LOAD: 00000000               ;Image Load Address
+NOR10ENTRY: 00000000              ;Image Entry Point
+
+
@@ -0,0 +1,15 @@
+xen_name=xen
+xen_addr=0x84000000
+uenvcmd=run mybootcmd
+mybootcmd=echo Loading custom boot command; \
+echo Loading kernel; \
+afs load ${kernel_name} ${kernel_addr} ; \
+if test $? -eq 1; then echo Loading ${kernel_alt_name} instead of ${kernel_name}; afs load ${kernel_alt_name} ${kernel_addr}; fi; \
+echo Loading device tree; \
+afs load  ${fdtfile} ${fdt_addr}; \
+if test $? -eq 1; then echo Loading ${fdt_alt_name} instead of ${fdtfile}; \
+afs load ${fdt_alt_name} ${fdt_addr}; fi; fdt addr ${fdt_addr}; fdt resize; \
+echo Loading Xen; \
+afs load  ${xen_name} ${xen_addr}; \
+if test $? -eq 0; then echo Booting Xen; bootefi ${xen_addr} ${fdt_addr}; fi;
+
@@ -1,10 +0,0 @@
-# Use OVERRIDES to minimize the usage of
-# ${@bb.utils.contains('DISTRO_FEATURES', 'autonomy-host', ...
-OVERRIDES:append = "${ARM_AUTONOMY_HOST_OVERRIDES}"
-
-FILESEXTRAPATHS:prepend:autonomy-host:fvp-base := "${THISDIR}/${PN}:"
-
-#
-# FVP BASE
-#
-SRC_URI:append:autonomy-host:fvp-base = " file://xen_u-boot_kernel_addr.patch"
@@ -1,7 +1,7 @@
 # When booting gem5-arm64 with Xen we need to set the cpu as Cortex A53 and
 # remove support for pointer authentification
-GEM5_RUN_EXTRA:append = " \
-${@bb.utils.contains('DISTRO_FEATURES_NATIVE', 'xen', \
+GEM5_RUN_EXTRA_append = " \
+${@bb.utils.contains('DISTRO_FEATURES_NATIVE', 'arm-autonomy-host', \
 '--param=system.cpu_cluster[0].cpus[0].isa[0].midr=0x410fd030 \
 --param=system.cpu_cluster[0].cpus[0].isa[0].id_aa64isar1_el1=0x0', \
 '', d)}"
@@ -11,31 +11,29 @@
    /delete-node/ pmu;
    /delete-node/ spe-pmu;

-    soc {
-        /*
-         * disable IOMMU until we have a proper support in xen
-         */
-        /delete-node/ iommu@4f000000;
-        /delete-node/ iommu@4f400000;
+    /*
+     * disable IOMMU until we have a proper support in xen
+     */
+    /delete-node/ iommu@4f000000;
+    /delete-node/ iommu@4f400000;

-        /*
-         * Set extra registers required for PCI quirks to communicate with SCP
-         * and remove invalid properties due to removal
-        */
-        pcie@68000000 {
-            reg = <0 0x68000000 0 0x1200000>,
-                    <0 0x06000000 0 0x80000>,
-                    <0 0x62000000 0 0x80000>;
-            /delete-property/ msi-map;
-            /delete-property/ iommu-map;
-        };
+    /*
+     * Set extra registers required for PCI quirks to communicate with SCP
+     * and remove invalid properties due to removal
+     */
+    pcie@68000000 {
+        reg = <0 0x68000000 0 0x1200000>,
+                <0 0x06000000 0 0x80000>,
+                <0 0x62000000 0 0x80000>;
+        /delete-property/ msi-map;
+        /delete-property/ iommu-map;
+    };

-        pcie@70000000 {
-            reg = <0 0x70000000 0 0x1200000>,
-                    <0 0x06000000 0 0x80000>,
-                    <0 0x60000000 0 0x80000>;
-            /delete-property/ msi-map;
-            /delete-property/ iommu-map;
-        };
+    pcie@70000000 {
+        reg = <0 0x70000000 0 0x1200000>,
+                <0 0x06000000 0 0x80000>,
+                <0 0x60000000 0 0x80000>;
+        /delete-property/ msi-map;
+        /delete-property/ iommu-map;
    };
 };
@@ -1,23 +1,25 @@
 # Platform dependent parameters

-FILESEXTRAPATHS:prepend := "${THISDIR}/files:"
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"

 # Add a dtb snippet to turn off iommu in dom0 on Juno board
-SRC_URI:append:juno = " file://xen-juno.dtsi"
-XEN_DEVICETREE_DTSI_MERGE:append:juno = " xen-juno.dtsi"
+SRC_URI_append_juno = " file://xen-juno.dtsi"
+XEN_DEVICETREE_DTSI_MERGE_append_juno = " xen-juno.dtsi"

 # Add a dtb snippet to remove pmu and iommu in dom0 on N1SDP
-SRC_URI:append:n1sdp = " file://xen-n1sdp.dtsi"
-XEN_DEVICETREE_DTSI_MERGE:append:n1sdp = " xen-n1sdp.dtsi"
-# For N1SDP, the XEN_DEVICETREE_DEPEND and XEN_DEVICETREE_DTBS variables are
-# being set in meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/n1sdp-extra-settings.inc
+SRC_URI_append_n1sdp = " file://xen-n1sdp.dtsi"
+XEN_DEVICETREE_DTSI_MERGE_append_n1sdp = " xen-n1sdp.dtsi"

 # Board specific configs
-XEN_DEVICETREE_DOM0_BOOTARGS:append:juno = " root=/dev/sda1 rootwait"
-XEN_DEVICETREE_XEN_BOOTARGS:append:juno = " console=dtuart dtuart=serial0 bootscrub=0 iommu=no"
+XEN_DEVICETREE_DOM0_BOOTARGS_append_juno = " root=/dev/sda1 rootwait"
+XEN_DEVICETREE_XEN_BOOTARGS_append_juno = " console=dtuart dtuart=serial0 bootscrub=0 iommu=no"

-XEN_DEVICETREE_DOM0_BOOTARGS:append:n1sdp = " root=/dev/sda2 rootwait"
-XEN_DEVICETREE_XEN_BOOTARGS:append:n1sdp = " console=dtuart dtuart=serial0 bootscrub=0 iommu=no"
+XEN_DEVICETREE_DOM0_BOOTARGS_append_n1sdp = " root=/dev/sda1 rootwait"
+XEN_DEVICETREE_XEN_BOOTARGS_append_n1sdp = " console=dtuart dtuart=serial0 bootscrub=0 iommu=no"
+
+XEN_DEVICETREE_DOM0_BOOTARGS_append_fvp-base = " root=/dev/vda2"
+XEN_DEVICETREE_XEN_BOOTARGS_append_fvp-base = " console=dtuart dtuart=serial0 bootscrub=0"
+
+XEN_DEVICETREE_DOM0_BOOTARGS_append_foundation-armv8 = " root=/dev/vda2"
+XEN_DEVICETREE_XEN_BOOTARGS_append_foundation-armv8 = " console=dtuart dtuart=serial0 bootscrub=0"

-XEN_DEVICETREE_DOM0_BOOTARGS:append:fvp-base = " root=/dev/vda1"
-XEN_DEVICETREE_XEN_BOOTARGS:append:fvp-base = " console=dtuart dtuart=serial0 bootscrub=0"
@@ -0,0 +1,44 @@
+From a41feccdb6c03f12bddb4fb650a0465f0ed6eeca Mon Sep 17 00:00:00 2001
+From: Lukas Juenger <juenger@ice.rwth-aachen.de>
+Date: Fri, 5 Apr 2019 15:54:04 +0200
+Subject: [PATCH] xen/arm: Cap the number of interrupt lines for dom0
+
+Dom0 vGIC will use the same number of interrupt lines as the hardware GIC.
+While the hardware GIC can support up to 1020 interrupt lines,
+the vGIC is only supporting up to 992 interrupt lines.
+This means that Xen will not be able to boot on platforms where the hardware
+GIC supports more than 992 interrupt lines.
+While it would make sense to increase the limits in the vGICs, this is not
+trivial because of the design choices.
+At the moment, only models seem to report the maximum of interrupt lines.
+They also do not have any interrupt wired above the 992 limit.
+So it should be fine to cap the number of interrupt lines for dom0 to 992 lines.
+
+Signed-off-by: Lukas Juenger <juenger@ice.rwth-aachen.de>
+Acked-by: Julien Grall <julien.grall@arm.com>
+---
+ xen/arch/arm/setup.c | 8 +++++++-
+ 1 file changed, 7 insertions(+), 1 deletion(-)
+
+diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
+index 444857a967..ccb0f181ea 100644
+--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
+@@ -888,7 +888,13 @@ void __init start_xen(unsigned long boot_phys_offset,
+     /* Create initial domain 0. */
+     /* The vGIC for DOM0 is exactly emulating the hardware GIC */
+     dom0_cfg.arch.gic_version = XEN_DOMCTL_CONFIG_GIC_NATIVE;
+-    dom0_cfg.arch.nr_spis = gic_number_lines() - 32;
+    /*
+     * Xen vGIC supports a maximum of 992 interrupt lines.
+     * 32 are substracted to cover local IRQs.
+     */
+    dom0_cfg.arch.nr_spis = min(gic_number_lines(), (unsigned int) 992) - 32;
+    if ( gic_number_lines() > 992 )
+        printk(XENLOG_WARNING "Maximum number of vGIC IRQs exceeded.\n");
+     dom0_cfg.max_vcpus = dom0_max_vcpus();
+ 
+     dom0 = domain_create(0, &dom0_cfg, true);
+-- 
+2.17.1
+
@@ -1,2 +0,0 @@
-CONFIG_DEBUG=y
-CONFIG_EARLY_PRINTK_FASTMODEL=y
@@ -0,0 +1,73 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Xen/arm 4.12.0 Configuration
+#
+CONFIG_64BIT=y
+CONFIG_ARM_64=y
+CONFIG_ARM=y
+CONFIG_ARCH_DEFCONFIG="arch/arm/configs/arm64_defconfig"
+
+#
+# Architecture Features
+#
+CONFIG_NR_CPUS=128
+CONFIG_GICV3=y
+CONFIG_HVM=y
+# CONFIG_NEW_VGIC is not set
+CONFIG_SBSA_VUART_CONSOLE=y
+CONFIG_ARM_SSBD=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+
+#
+# ARM errata workaround via the alternative framework
+#
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_834220=y
+CONFIG_ARM64_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_ALL_PLAT=y
+# CONFIG_QEMU is not set
+# CONFIG_RCAR3 is not set
+# CONFIG_MPSOC is not set
+# CONFIG_NO_PLAT is not set
+CONFIG_ALL64_PLAT=y
+# CONFIG_ALL32_PLAT is not set
+CONFIG_MPSOC_PLATFORM=y
+
+#
+# Common Features
+#
+CONFIG_HAS_ALTERNATIVE=y
+CONFIG_HAS_DEVICE_TREE=y
+CONFIG_MEM_ACCESS=y
+CONFIG_HAS_PDX=y
+# CONFIG_XSM is not set
+CONFIG_SCHED_CREDIT=y
+CONFIG_SCHED_CREDIT2=y
+CONFIG_SCHED_RTDS=y
+# CONFIG_SCHED_ARINC653 is not set
+CONFIG_SCHED_NULL=y
+CONFIG_SCHED_DEFAULT="credit2"
+# CONFIG_LIVEPATCH is not set
+CONFIG_SUPPRESS_DUPLICATE_SYMBOL_WARNINGS=y
+CONFIG_CMDLINE=""
+CONFIG_DOM0_MEM=""
+
+#
+# Device Drivers
+#
+CONFIG_HAS_NS16550=y
+CONFIG_HAS_CADENCE_UART=y
+CONFIG_HAS_MVEBU=y
+CONFIG_HAS_PL011=y
+CONFIG_HAS_SCIF=y
+CONFIG_HAS_PASSTHROUGH=y
+CONFIG_ARM_SMMU=y
+CONFIG_DEFCONFIG_LIST="arch/arm/configs/arm64_defconfig"
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
@@ -0,0 +1,73 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Xen/arm 4.12.0 Configuration
+#
+CONFIG_64BIT=y
+CONFIG_ARM_64=y
+CONFIG_ARM=y
+CONFIG_ARCH_DEFCONFIG="arch/arm/configs/arm64_defconfig"
+
+#
+# Architecture Features
+#
+CONFIG_NR_CPUS=128
+CONFIG_GICV3=y
+CONFIG_HVM=y
+# CONFIG_NEW_VGIC is not set
+CONFIG_SBSA_VUART_CONSOLE=y
+CONFIG_ARM_SSBD=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+
+#
+# ARM errata workaround via the alternative framework
+#
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_834220=y
+CONFIG_ARM64_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_ALL_PLAT=y
+# CONFIG_QEMU is not set
+# CONFIG_RCAR3 is not set
+# CONFIG_MPSOC is not set
+# CONFIG_NO_PLAT is not set
+CONFIG_ALL64_PLAT=y
+# CONFIG_ALL32_PLAT is not set
+CONFIG_MPSOC_PLATFORM=y
+
+#
+# Common Features
+#
+CONFIG_HAS_ALTERNATIVE=y
+CONFIG_HAS_DEVICE_TREE=y
+CONFIG_MEM_ACCESS=y
+CONFIG_HAS_PDX=y
+# CONFIG_XSM is not set
+CONFIG_SCHED_CREDIT=y
+CONFIG_SCHED_CREDIT2=y
+CONFIG_SCHED_RTDS=y
+# CONFIG_SCHED_ARINC653 is not set
+CONFIG_SCHED_NULL=y
+CONFIG_SCHED_DEFAULT="credit2"
+# CONFIG_LIVEPATCH is not set
+CONFIG_SUPPRESS_DUPLICATE_SYMBOL_WARNINGS=y
+CONFIG_CMDLINE=""
+CONFIG_DOM0_MEM=""
+
+#
+# Device Drivers
+#
+CONFIG_HAS_NS16550=y
+CONFIG_HAS_CADENCE_UART=y
+CONFIG_HAS_MVEBU=y
+CONFIG_HAS_PL011=y
+CONFIG_HAS_SCIF=y
+CONFIG_HAS_PASSTHROUGH=y
+CONFIG_ARM_SMMU=y
+CONFIG_DEFCONFIG_LIST="arch/arm/configs/arm64_defconfig"
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
@@ -1,2 +0,0 @@
-CONFIG_DEBUG=y
-CONFIG_EARLY_PRINTK_JUNO=y
@@ -0,0 +1,100 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Xen/arm 4.12.2 Configuration
+#
+CONFIG_64BIT=y
+CONFIG_ARM_64=y
+CONFIG_ARM=y
+CONFIG_ARCH_DEFCONFIG="arch/arm/configs/arm64_defconfig"
+
+#
+# Architecture Features
+#
+CONFIG_NR_CPUS=128
+CONFIG_ACPI=y
+CONFIG_GICV3=y
+CONFIG_HAS_ITS=y
+CONFIG_HVM=y
+# CONFIG_NEW_VGIC is not set
+CONFIG_SBSA_VUART_CONSOLE=y
+CONFIG_ARM_SSBD=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+
+#
+# ARM errata workaround via the alternative framework
+#
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_834220=y
+CONFIG_ARM64_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_ALL_PLAT=y
+# CONFIG_QEMU is not set
+# CONFIG_RCAR3 is not set
+# CONFIG_MPSOC is not set
+# CONFIG_NO_PLAT is not set
+CONFIG_ALL64_PLAT=y
+# CONFIG_ALL32_PLAT is not set
+CONFIG_MPSOC_PLATFORM=y
+
+#
+# Common Features
+#
+CONFIG_HAS_ALTERNATIVE=y
+CONFIG_HAS_DEVICE_TREE=y
+# CONFIG_MEM_ACCESS is not set
+CONFIG_HAS_PDX=y
+# CONFIG_TMEM is not set
+CONFIG_XSM=y
+CONFIG_XSM_FLASK=y
+CONFIG_XSM_FLASK_AVC_STATS=y
+# CONFIG_XSM_FLASK_POLICY is not set
+CONFIG_XSM_SILO=y
+# CONFIG_XSM_DUMMY_DEFAULT is not set
+# CONFIG_XSM_FLASK_DEFAULT is not set
+CONFIG_XSM_SILO_DEFAULT=y
+# CONFIG_ARGO is not set
+
+#
+# Schedulers
+#
+CONFIG_SCHED_CREDIT=y
+CONFIG_SCHED_CREDIT2=y
+CONFIG_SCHED_RTDS=y
+# CONFIG_SCHED_ARINC653 is not set
+CONFIG_SCHED_NULL=y
+# CONFIG_SCHED_CREDIT_DEFAULT is not set
+CONFIG_SCHED_CREDIT2_DEFAULT=y
+# CONFIG_SCHED_RTDS_DEFAULT is not set
+# CONFIG_SCHED_NULL_DEFAULT is not set
+CONFIG_SCHED_DEFAULT="credit2"
+# CONFIG_LIVEPATCH is not set
+CONFIG_SUPPRESS_DUPLICATE_SYMBOL_WARNINGS=y
+CONFIG_CMDLINE=""
+CONFIG_DOM0_MEM=""
+
+#
+# Device Drivers
+#
+CONFIG_HAS_NS16550=y
+CONFIG_HAS_CADENCE_UART=y
+CONFIG_HAS_MVEBU=y
+CONFIG_HAS_PL011=y
+CONFIG_HAS_SCIF=y
+CONFIG_HAS_PASSTHROUGH=y
+CONFIG_ARM_SMMU=y
+CONFIG_DEFCONFIG_LIST="arch/arm/configs/arm64_defconfig"
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_COVERAGE is not set
+# CONFIG_LOCK_PROFILE is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VERBOSE_DEBUG=y
+# CONFIG_DEVICE_TREE_DEBUG is not set
+# CONFIG_SCRUB_DEBUG is not set
@@ -1,3 +0,0 @@
-CONFIG_DEBUG=y
-CONFIG_EARLY_UART_CHOICE_PL011=y
-CONFIG_EARLY_UART_BASE_ADDRESS=0x2a400000
@@ -1,5 +0,0 @@
-CONFIG_EXPERT=y
-# Enable ACPI support
-CONFIG_ACPI=y
-# Enable ARM Interrupt Translation Service (ITS) emulation
-CONFIG_HAS_ITS=y
@@ -1,15 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+# Machine specific settings
+XEN_CONFIG_EARLY_PRINTK_juno = "juno"
+XEN_CONFIG_EARLY_PRINTK_gem5-arm64 = "vexpress"
+XEN_CONFIG_EARLY_PRINTK_fvp-base = "fastmodel"
+XEN_CONFIG_EARLY_PRINTK_foundation-armv8 = "fastmodel"
+XEN_CONFIG_EARLY_PRINTK_n1sdp = "pl011,0x2a400000"
+
+# Foundation-armv8 support
+COMPATIBLE_MACHINE_foundation-armv8 = "foundation-armv8"
+
+SRC_URI_append_foundation-armv8 = " file://fvp/defconfig"
+
 # FVP Base support
-COMPATIBLE_MACHINE:fvp-base = "fvp-base"
-FILESEXTRAPATHS:prepend:fvp-base := "${THISDIR}/files:"
-SRC_URI:append:fvp-base = " file://early-printk.cfg"
+COMPATIBLE_MACHINE_fvp-base = "fvp-base"
+
+SRC_URI_append_fvp-base = " file://fvp/defconfig"

 # Juno support
-COMPATIBLE_MACHINE:juno = "juno"
-FILESEXTRAPATHS:prepend:juno := "${THISDIR}/files:"
-SRC_URI:append:juno = " file://early-printk.cfg"
+COMPATIBLE_MACHINE_juno = "juno"
+
+SRC_URI_append_juno = " file://juno/defconfig"
+
+# Gem5 support
+# Fix problem with number of interrupts on gem5
+SRC_URI_append_gem5-arm64 = " file://4.12.0/0001-xen-arm-Cap-the-number-of-interrupt-lines-for-dom0.patch"

 # N1SDP support
-COMPATIBLE_MACHINE:n1sdp = "n1sdp"
-FILESEXTRAPATHS:prepend:n1sdp := "${THISDIR}/files:"
-SRC_URI:append:n1sdp = " file://n1sdp.cfg \
-                         file://early-printk.cfg"
+COMPATIBLE_MACHINE_n1sdp = "n1sdp"
+
+SRC_URI_append_n1sdp = " file://n1sdp/defconfig"
@@ -0,0 +1,6 @@
+# Board specific configuration for the manager
+
+# FVP and Foundation are using vda as hard drive and partition 2 is the
+# default rootfs, so use vda3 for guest lvm
+XENGUEST_MANAGER_VOLUME_DEVICE_foundation-armv8 ?= "/dev/vda3"
+XENGUEST_MANAGER_VOLUME_DEVICE_fvp-base ?= "/dev/vda3"
@@ -0,0 +1,10 @@
+XENGUEST_NETWORK_BRIDGE_MEMBERS_n1sdp ?= "eth0"
+
+XENGUEST_NETWORK_BRIDGE_MEMBERS_fvp-base ?= "eth0"
+
+XENGUEST_NETWORK_BRIDGE_MEMBERS_foundation-armv8 ?= "eth0"
+
+XENGUEST_NETWORK_BRIDGE_MEMBERS_gem5-arm64 ?= "eth0"
+
+# Juno board has 2 network interfaces, add both of them to the bridge
+XENGUEST_NETWORK_BRIDGE_MEMBERS_juno ?= "eth0 eth1"
@@ -0,0 +1,17 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}:"
+
+#
+# arm-autonomy kmeta extra
+#
+SRC_URI_append = " file://arm-autonomy-kmeta-extra;type=kmeta;name=arm-autonomy-kmeta-extra;destsuffix=arm-autonomy-kmeta-extra"
+
+# We need to turn off SVE support in the Linux kernel otherwise Xen is stopping
+# Linux kernel with a coredump while trying to access XEN bit of CPACR1 core
+# register.
+LINUX_ARM_AUTONOMY_DISABLE_ARM64_SVE = "${@bb.utils.contains_any('DISTRO_FEATURES', \
+                                         'arm-autonomy-host arm-autonomy-guest', \
+                                         ' features/arm-autonomy/disable-arm64-sve.scc','',d)}"
+
+KERNEL_FEATURES_append_gem5-arm64 = "${LINUX_ARM_AUTONOMY_DISABLE_ARM64_SVE}"
+KERNEL_FEATURES_append_fvp-base = "${LINUX_ARM_AUTONOMY_DISABLE_ARM64_SVE}"
+KERNEL_FEATURES_append_foundation-armv8 = "${LINUX_ARM_AUTONOMY_DISABLE_ARM64_SVE}"
@@ -1,14 +0,0 @@
-# short-description: Create a disk image
-# long-description: Creates a partitioned disk image that the user
-# can directly dd to boot media.
-
-# For FVP Base first partition is rootfs normally populated as /dev/vda1
-part / --source rootfs --ondisk sda --fstype=ext4 --label root --align 1024
-
-# Second partition to accomodate guests images normally populated as /dev/vda2 (used by XENGUEST_MANAGER_VOLUME_DEVICE)
-part --label guests --source empty --ondisk sda --size="${GUEST_PART_SIZE}${GUEST_PART_SIZE_UNIT}" --system-id 8e --align 1024
-
-# Third partition is user defined entry normally populated as /dev/vda3
-${AUTONOMY_HOST_EXTRA_PARTITION}
-
-bootloader --ptable msdos
@@ -1,14 +0,0 @@
-# short-description: Create a disk image
-# long-description: Creates a partitioned disk image that the user
-# can directly dd to boot media.
-
-# For Juno first partition is rootfs normally populated as /dev/sda1
-part / --source rootfs --ondisk sda --fstype=ext4 --label root --align 1024
-
-# Second partition to accomodate guests images normally populated as /dev/sda2 (used by XENGUEST_MANAGER_VOLUME_DEVICE)
-part --label guests --source empty --ondisk sda --size="${GUEST_PART_SIZE}${GUEST_PART_SIZE_UNIT}" --system-id 8e --align 1024
-
-# Third partition is user defined entry normally populated as /dev/sda3
-${AUTONOMY_HOST_EXTRA_PARTITION}
-
-bootloader --ptable msdos
--- a/Show More
+++ b/Show More