arm/trusted-firmware-a: add branch name for mbedtls

It appears that the mbedtls team have moved the SHA which meta-arm was using from master branch. It is still present in mbedtls-2.16 branch so this is now used. Change-Id: If24915b1a1dc889d55b359863943439c76f6ca85 Signed-off-by: Prabin CA <prabin.ca@arm.com> Signed-off-by: Ross Burton <ross.burton@arm.com>
2026-07-18 16:37:08 +00:00 · 2020-09-09 09:14:55 +01:00 · 2020-09-09 09:14:55 +01:00 · 2020-09-04 11:25:52 -04:00 · 2020-09-04 11:25:52 -04:00 · 2020-09-04 11:25:52 -04:00
383 changed files with 2402 additions and 23318 deletions
@@ -25,26 +25,14 @@ Currently, we only accept patches from the meta-arm mailing list.  For general
 information on how to submit a patch, please read
 https://www.openembedded.org/wiki/How_to_submit_a_patch_to_OpenEmbedded

-E-mail meta-arm@lists.yoctoproject.org with patches created using this process. You can configure git-send-email to automatically use this address for the meta-arm repository with the following git command:
-
-$ git config --local --add sendemail.to meta-arm@lists.yoctoproject.org
-
-Commits and patches added should follow the OpenEmbedded patch guidelines:
-
-https://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines
-
-The component being changed in the shortlog should be prefixed with the layer name (without the meta- prefix), for example:
-
-  arm-bsp/trusted-firmware-a: decrease frobbing level
-
-  arm-toolchain/gcc: enable foobar v2
+E-mail meta-arm@lists.yoctoproject.org with patches created using this process

 Reporting bugs
 --------------
 E-mail meta-arm@lists.yoctoproject.org with the error encountered and the steps
-to reproduce the issue.
+to reproduce the issue
+

 Maintainer(s)
 -------------
 * Jon Mason <jon.mason@arm.com>
-* Ross Burton <ross.burton@arm.com>
@@ -88,5 +88,5 @@ would like to contribute, please contact the maintainers

 Maintainer(s)
 -------------
-* Diego Sueiro <diego.sueiro@arm.com>
 * Bertrand Marquis <bertrand.marquis@arm.com>
+* Filipe Rinaldi <filipe.rinaldi@arm.com>
@@ -12,11 +12,6 @@ inherit xenguest-image
 # recipes, the last recipe setting it will prevail.
 XENGUEST_EXTRA_DTB ??= ""

-# Add a ramdisk file for the guest
-# Only one file should be added, if this is set multiple times or in several
-# recipes, the last recipe setting it will prevail.
-XENGUEST_EXTRA_RAMDISK ??= ""
-
 # Append something to the guest xen configuration
 # All files here will be merged together in the final xen configuration
 # This can contain several files or be used in several recipes
@@ -54,13 +49,6 @@ do_deploy_append() {
        call_xenguest_mkimage partial --xen-device-tree=${XENGUEST_EXTRA_DTB}
    fi

-    if [ -n "${XENGUEST_EXTRA_RAMDISK}" ]; then
-        if [ ! -f ${XENGUEST_EXTRA_RAMDISK} ]; then
-            die "xenguest-image: DTB file ${XENGUEST_EXTRA_RAMDISK} does not exist"
-        fi
-        call_xenguest_mkimage partial --xen-ramdisk=${XENGUEST_EXTRA_RAMDISK}
-    fi
-
    if [ -n "${XENGUEST_EXTRA_XENCONFIG}" ]; then
        for f in ${XENGUEST_EXTRA_XENCONFIG}; do
            if [ ! -f $f ]; then
@@ -58,14 +58,10 @@ XENGUEST_IMAGE_DISK_SIZE ??= "${@ '4' if not d.getVar('INITRAMFS_IMAGE') else '0
 # and containing the root filesystem produced by Yocto
 XENGUEST_IMAGE_DISK_PARTITIONS ??= "1:${XENGUEST_IMAGE_DISK_SIZE}:ext4:rootfs.tar.gz"

-# XENGUEST_IMAGE_NETWORK_TYPE can be set to "bridge", "nat" or "none".
-# The "bridge" type will share the physical eth interface from dom0 with the
-# domU. This will allow the domU to have access to the external network.
-# The "nat" type will setup a virtual network between dom0 and domU and also
-# configure and run the dhcpd on dom0 to serve the domU.
-# The "none" type will not affect any networking setting between on dom0 and
-# domU.
-XENGUEST_IMAGE_NETWORK_TYPE ??= "bridge"
+# XENGUEST_IMAGE_NETWORK_BRIDGE can be set to 1 to have a network interface
+# on the guest connected to host bridged network. This will provide the guest
+# with a network interface connected directly to the external network
+XENGUEST_IMAGE_NETWORK_BRIDGE ??= "1"

 # Sub-directory in wich the guest is created. This is create in deploy as a
 # subdirectory and must be coherent between all components using this class so
@@ -151,10 +147,10 @@ xenguest_image_create() {
        call_xenguest_mkimage update --set-param=GUEST_AUTOBOOT=0
    fi

-    if [ -n "${XENGUEST_IMAGE_NETWORK_TYPE}" ]; then
-        call_xenguest_mkimage update --set-param=XENGUEST_NETWORK_TYPE="${XENGUEST_IMAGE_NETWORK_TYPE}"
+    if [ "${XENGUEST_IMAGE_NETWORK_BRIDGE}" = "1" ]; then
+        call_xenguest_mkimage update --set-param=NETWORK_BRIDGE=1
    else
-        call_xenguest_mkimage update --set-param=XENGUEST_NETWORK_TYPE="none"
+        call_xenguest_mkimage update --set-param=NETWORK_BRIDGE=0
    fi
 }

@@ -9,7 +9,3 @@ IMAGE_FSTYPES += "xenguest"

 # xenguest kernel extension to handle initramfs
 KERNEL_CLASSES += "kernel-xenguest"
-
-IMAGE_INSTALL_append = "${@bb.utils.contains('DISTRO_FEATURES', 'docker', \
-                        ' packagegroup-docker-runtime-minimal', \
-                        '', d)}"
@@ -8,18 +8,3 @@ DISTRO_FEATURES_NATIVE_append = " arm-autonomy-host"
 # If the kernel image is needed in the rootfs the following should be set from
 # a bbappend: RDEPENDS_${KERNEL_PACKAGE_NAME}-base = "${KERNEL_PACKAGE_NAME}-image"
 RDEPENDS_${KERNEL_PACKAGE_NAME}-base ?= ""
-
-# Until we don't move to use the kea dhcp-server we build dhcp_4.4.2.bb recipe
-# which depends on bind_9.11.22.bb recipe.
-PREFERRED_VERSION_bind ?= "9.11%"
-
-# Require extra machine specific settings from meta-arm-bsp dynamic-layers only
-# if meta-arm-bsp is in the bblayers.conf
-# Directory for meta-arm-autonomy/dynamic-layers/meta-arm-bsp machine extra settings
-ARM_AUTONOMY_ARM_BSP_DYNAMIC_EXTRA_CFGDIR = "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/conf/machine"
-ARM_AUTONOMY_MACHINE_EXTRA_REQUIRE ?= \
-"${ARM_AUTONOMY_ARM_BSP_DYNAMIC_EXTRA_CFGDIR}/arm-autonomy-machine-extra-settings.inc"
-
-require ${@bb.utils.contains('BBFILE_COLLECTIONS', 'meta-arm-bsp', \
-                             '${ARM_AUTONOMY_MACHINE_EXTRA_REQUIRE}' , \
-                             '', d)}
@@ -16,23 +16,19 @@ LAYERDEPENDS_meta-arm-autonomy = " \
   openembedded-layer \
   virtualization-layer \
 "
-LAYERSERIES_COMPAT_meta-arm-autonomy = "gatesgarth"
+LAYERSERIES_COMPAT_meta-arm-autonomy = "dunfell"

 # We don't activate virtualization feature from meta-virtualization as it
 # brings in lots of stuff we don't need. We need to disable the sanity check
 # otherwise the user will see a warning on each build.
 SKIP_META_VIRT_SANITY_CHECK = "1"

-ARM_AUTONOMY_LAYERDIR := "${LAYERDIR}"
 # Directory of our distro config files
-ARM_AUTONOMY_DISTRO_CFGDIR = "${ARM_AUTONOMY_LAYERDIR}/conf/distro/include/"
+ARM_AUTONOMY_DISTRO_CFGDIR = "${LAYERDIR}/conf/distro/include/"

 # Add class to handle arm-autonomy distro extensions
 USER_CLASSES_append = " arm-autonomy-features"

 BBFILES_DYNAMIC += " \
    meta-arm-bsp:${LAYERDIR}/dynamic-layers/meta-arm-bsp/*/*/*.bbappend \
-    meta-gem5:${LAYERDIR}/dynamic-layers/meta-gem5/*/*/*.bbappend \
 "
-# Root directory for the meta-arm-autonomy/dynamic-layers/meta-arm-bsp
-ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR = "${ARM_AUTONOMY_LAYERDIR}/dynamic-layers/meta-arm-bsp"
@@ -26,7 +26,6 @@ First you must download the Yocto layers needed:
 - [poky](https://git.yoctoproject.org/poky)
 - [meta-virtualization](https://git.yoctoproject.org/meta-virtualization)
 - [meta-arm](https://git.yoctoproject.org/meta-arm)
- - [meta-kernel](https://gitlab.com/openembedded/community/meta-kernel.git)
 - all other layers you might want to use

 For each of the downloaded layer make sure you checkout the release of Yocto
@@ -57,9 +56,8 @@ Here are the main steps to create an arm-autonomy project:
  bitbake-layers add-layer $LAYERDIR_BASE/meta-poky $LAYERDIR_BASE/meta-yocto-bsp \
   $LAYERDIR_BASE/meta-openembedded/meta-oe $LAYERDIR_BASE/meta-openembedded/meta-python \
   $LAYERDIR_BASE/meta-openembedded/meta-filesystems $LAYERDIR_BASE/meta-openembedded/meta-networking \
-   $LAYERDIR_BASE/meta-virtualization $LAYERDIR_BASE/meta-kernel \
-   $LAYERDIR_BASE/meta-arm/meta-arm $LAYERDIR_BASE/meta-arm/meta-arm-toolchain \
-   $LAYERDIR_BASE/meta-arm/meta-arm-bsp $LAYERDIR_BASE/meta-arm/meta-arm-autonomy \
+   $LAYERDIR_BASE/meta-virtualization $LAYERDIR_BASE/meta-arm/meta-arm-autonomy \
+   $LAYERDIR_BASE/meta-arm/meta-arm $LAYERDIR_BASE/meta-arm/meta-arm-bsp
  ```

  Example of a `conf/bblayers.conf`:
@@ -73,17 +71,12 @@ Here are the main steps to create an arm-autonomy project:
    /home/user/arm-autonomy/meta-openembedded/meta-filesystems \
    /home/user/arm-autonomy/meta-openembedded/meta-networking \
    /home/user/arm-autonomy/meta-virtualization \
-    /home/user/arm-autonomy/meta-kernel \
-    /home/user/arm-autonomy/meta-arm/meta-arm \
-    /home/user/arm-autonomy/meta-arm/meta-arm-toolchain \
-    /home/user/arm-autonomy/meta-arm/meta-arm-bsp \
    /home/user/arm-autonomy/meta-arm/meta-arm-autonomy \
+    /home/user/arm-autonomy/meta-arm/meta-arm \
+    /home/user/arm-autonomy/meta-arm/meta-arm-bsp \
    "
  ```

-  Be aware that changing the order may break some dependencies if editing the
-  config file manually.
-
 Those steps will have to be done for each project you will have to create.

 Host project
@@ -1,29 +0,0 @@
-Customizing Arm Autonomy Host image layout for N1SDP
-====================================================
-
-When buiding with `DISTRO_FEATURES += "arm-autonomy-host"` the user can
-perform a couple of customizations in the generated wic image:
-
-1. Set the guest partition size (default: 4iG) via `GUEST_PART_SIZE` and
-   `GUEST_PART_SIZE_UNIT` (M or G) variables to be set in any conf file. The
-   value of these variables should be aligned with the sum of all
-   XENGUEST_IMAGE_DISK_SIZE set for the guests. By default, LVM2 metadata is
-   1 MiB per physical volume, hence it needs to be taken into account when
-   setting GUEST_PART_SIZE.
-
-2. The wic image partition layout and contents with a custom wks file via
-   `ARM_AUTONOMY_WKS_FILE` variable (default:
-   arm-autonomy-n1sdp-efidisk.wks.in which is affected by GUEST_PART_SIZE,
-   GUEST_PART_SIZE_UNIT and GRUB_CFG_FILE variables).
-
-3. Custom grub.cfg file via `GRUB_CFG_FILE` (default:
-   arm-autonomy-n1sdp-grub.cfg) variable to be set in any conf file. The full
-   path or relative to `ARM_AUTONOMY_WKS_FILE` should be set.
-
-The `arm-autonomy-n1sdp-efidisk.wks.in` and `arm-autonomy-n1sdp-grub.cfg` files
-are located at `meta-arm-autonomy/dynamic-layers/meta-arm-bsp/wic`.
-
-Other variables can also be custmized to set what files need to be included
-in the wic image boot partition. Please refer to
-`meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/n1sdp-extra-settings.inc`
-for more details.
@@ -99,8 +99,6 @@ For a detailed help on available operations, please use:
  times to add several command line options.
 - --xen-device-tree=FILE: add dtb FILE as device tree. This both adding the
  file to the image and modifying the xen configuration to use it.
- --xen-ramdisk=FILE: add ramdisk FILE as guest ramdisk. This both adding the
-  file to the image and modifying the xen configuration to use it.
 - --init-script=FILE: add guest init script. The script is embedded inside the
  image file. Several script can be added and the basename of FILE is used to
  distinguish them (calling the option twice with the same file will update the
@@ -0,0 +1,49 @@
+xenguest network bridge
+=======================
+
+Introduction
+------------
+
+xenguest-network-bridge is creating a network bridge to allow some guests to
+have a direct connection to the external network.
+To do this, a bridge is created on the host using brctl with the network
+interfaces added to it so that the bridge is connected to the external network.
+It is also adding a guest init script which will, for guests configured to use
+it, create a virtual network interface for the guest and connect it to the
+network bridge on the host.
+
+Usage
+-----
+
+On the host the package xenguest-network-bridge must be included in your image.
+
+On the xenguest image of your guest, the parameter NETWORK_BRIDGE must be set
+to 1 (using xenguest-mkimage --set-param=NETWORK_BRIDGE=1).
+
+Bitbake parameters
+------------------
+Several parameters are available to configure the xenguest network bridge
+during Yocto project compilation (those can be set in your project local.conf,
+for example).
+
+The following parameters are available:
+
+- XENGUEST_NETWORK_BRIDGE_NAME: This variable defines the name of the network
+  bridge that is created on the host during init.
+  This is set by default to "xenbr0".
+
+- XENGUEST_NETWORK_BRIDGE_MEMBERS: This variable defines the list of network
+  interfaces that are added to the bridge when it is created on the host during
+  init.
+  This is set by default to "eth0".
+
+- XENGUEST_NETWORK_BRIDGE_CONFIG: This variable defines the configuration file
+  to use to configure the bridge network. By default it points to have file
+  configuring the network using dhcp.
+  You can provide a different file using a bbappend and make this variable
+  point to it if you want to customize your network configuration.
+
+- XENGUEST_IMAGE_NETWORK_BRIDGE: This variable can be set to 0 or 1 on guest
+  projects to enable or not the connection of the guest to the host bridge.
+  This is set by default to "1".
+
@@ -1,76 +0,0 @@
-Xenguest Network
-================
-
-Introduction
------------
-
-The xenguest-network package is primarly creating a network bridge to share
-the host eth physical interfaces with the guests virtual interfaces (vif).
-This way the guests can have access to the external network.
-
-At the moment 3 types of network arrangements are provided:
-
- Bridge: where the guest vif is added to the created bridge interface;
-
- NAT: where a private subnet is created for the guest, a dhcpd is started on
-  the host to serve the guest and the proper iptables rules are created to
-  allow the guest to access the external network;
-
- None: the guest vif is not connected to the bridge.
-
-Usage
-----
-
-On the host project the package xenguest-network must be included in your
-image, and on the guest project the XENGUEST_NETWORK_TYPE needs to be set to
-"bridge", "nat" or "none".
-
-Bitbake parameters
------------------
-
-Several parameters are available to configure the xenguest network bridge
-during Yocto project compilation (those can be set in your project local.conf
-or xenguest-network.bbappend, for example).
-
-The following parameters are available:
-
- XENGUEST_NETWORK_BRIDGE_NAME: This variable defines the name of the network
-  bridge that is created on the host during init.
-  This is set by default to "xenbr0".
-
- XENGUEST_NETWORK_BRIDGE_MEMBERS: This variable defines the list of the
-  physical network interfaces that are added to the bridge when it is created
-  on the host during init.
-  By default no physical interfaces are added.
-
- XENGUEST_NETWORK_BRIDGE_CONFIG: This variable defines the configuration file
-  to use to configure the bridge network. By default it points to have file
-  configuring the network using dhcp.
-  You can provide a different file using a bbappend and make this variable
-  point to it if you want to customize your network configuration.
-
- XENGUEST_IMAGE_NETWORK_TYPE: This variable can be set to "bridge" (default),
-  "nat" or "none".
-  The **bridge** type will add the domU vif interface to a bridge which also
-  contains the dom0 physical interface giving the guest direct access to the
-  external network.
-  The **nat** type will setup a private network between dom0 and domU, setup
-  the appropriate routing table, configure and run the dhcpd on dom0 to serve
-  the domU and apply the iptables rules to allow the guest to acess the
-  external network. The dhcpd configuration for the guest can be customised by
-  replacing the
-  "meta-arm-autonomy/recipes-extended/xenguest/files/dhcpd-params.cfg" file
-  in a xenguest-network.bbappend. The dhcpd-params.cfg file is installed in
-  the xenguest image and copied to
-  "/etc/xenguest/guests/${guestname}/files/dhcpd-params.cfg" when the guest
-  image is created. It will be consumed by the
-  "/etc/xen/scripts/vif-post.d/00-vif-xenguest.hook" script which is called by
-  "/etc/xen/scripts/vif-nat" script when starting/stopping the xenguest.
-  In the guest project, the NAT port forward can be customised by changing
-  the XENGUEST_IMAGE_HOST_PORT (default: "1000 + ${domid}") and
-  XENGUEST_IMAGE_GUEST_PORT (default: "22") variables in local.conf or
-  xenguest-base-image.bbappend. This configuration is implemented and installed
-  in "/etc/xenguest/guests/${guestname}/files/00-xenguest-nat-port-forward.hook"
-  script which is called by "/etc/xen/scripts/vif-post.d/00-vif-xenguest.hook".
-  The **none** type will not affect any networking setting between on dom0 and
-  domU.
@@ -1,7 +0,0 @@
-# Require extra machine specific settings
-ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE ?= ""
-ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE_n1sdp = "n1sdp-extra-settings.inc"
-ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE_fvp-base = "fvp-base-extra-settings.inc"
-ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE_juno = "juno-extra-settings.inc"
-
-require ${ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE}
@@ -1,7 +0,0 @@
-# Extra machine settings for fvp-base
-
-# FVP uses vda as hard drive and partition 2 is the
-# default rootfs, so use vda3 for guest lvm
-XENGUEST_MANAGER_VOLUME_DEVICE ?= "/dev/vda3"
-
-XENGUEST_NETWORK_BRIDGE_MEMBERS ?= "eth0"
@@ -1,4 +0,0 @@
-# Extra machine settings for juno
-
-# Juno board has 2 network interfaces, add both of them to the bridge
-XENGUEST_NETWORK_BRIDGE_MEMBERS ?= "eth0 eth1"
@@ -1,40 +0,0 @@
-# Extra machine settings for n1sdp
-
-# We need to extent the wks search path to be able to find the wks file set in
-# ARM_AUTONOMY_WKS_FILE.
-WKS_SEARCH_PATH_prepend := "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic:"
-
-ARM_AUTONOMY_WKS_FILE ?= "arm-autonomy-n1sdp-efidisk.wks.in"
-WKS_FILE = "${ARM_AUTONOMY_WKS_FILE}"
-
-# Set the wks guest partition size and unit. It must be aligned with the sum of
-# all XENGUEST_IMAGE_DISK_SIZE set for the guests. By default, LVM2 metadata is
-# 1 MiB per physical volume, hence it needs to be taken into account when
-# setting GUEST_PART_SIZE. The XENGUEST_IMAGE_DISK_SIZE default value is 4GiB.
-GUEST_PART_SIZE ?= "4097"
-GUEST_PART_SIZE_UNIT ?= "M"
-
-# The GRUB_CFG_FILE affects arm-autonomy-n1sdp-efidisk.wks.in file
-GRUB_CFG_FILE ?= "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic/arm-autonomy-n1sdp-grub.cfg"
-
-# From arm-autonomy-n1sdp-efidisk.wks.in, the /boot partition is /dev/sda1, and
-# the "/" partition is /dev/sda2.
-XENGUEST_MANAGER_VOLUME_DEVICE ?= "/dev/sda3"
-
-XENGUEST_NETWORK_BRIDGE_MEMBERS ?= "eth0"
-
-# The XEN_DEVICETREE_DEPEND and XEN_DEVICETREE_DTBS variables aftect the
-# xen-devicetree.bb recipe
-XEN_DEVICETREE_DEPEND = "virtual/trusted-firmware-a:do_deploy"
-XEN_DEVICETREE_DTBS ?= "n1sdp-single-chip.dtb"
-# XEN_MOD_DEVICETREE_DTBS are the generated devicetrees for Xen. By default the
-# xen-devicetree.bb recipe adds '-xen' suffix to it
-XEN_MOD_DEVICETREE_DTBS ?= "n1sdp-single-chip-xen.dtb"
-
-# When generating the wic image we need to have the xen deployed
-do_image_wic[depends] += "xen:do_deploy"
-
-# Select the extra files to be included in the boot partition
-IMAGE_EFI_BOOT_FILES += "xen-n1sdp.efi;xen.efi"
-IMAGE_EFI_BOOT_FILES += "${XEN_MOD_DEVICETREE_DTBS}"
-
@@ -11,31 +11,29 @@
    /delete-node/ pmu;
    /delete-node/ spe-pmu;

-    soc {
-        /*
-         * disable IOMMU until we have a proper support in xen
-         */
-        /delete-node/ iommu@4f000000;
-        /delete-node/ iommu@4f400000;
+    /*
+     * disable IOMMU until we have a proper support in xen
+     */
+    /delete-node/ iommu@4f000000;
+    /delete-node/ iommu@4f400000;

-        /*
-         * Set extra registers required for PCI quirks to communicate with SCP
-         * and remove invalid properties due to removal
-        */
-        pcie@68000000 {
-            reg = <0 0x68000000 0 0x1200000>,
-                    <0 0x06000000 0 0x80000>,
-                    <0 0x62000000 0 0x80000>;
-            /delete-property/ msi-map;
-            /delete-property/ iommu-map;
-        };
+    /*
+     * Set extra registers required for PCI quirks to communicate with SCP
+     * and remove invalid properties due to removal
+     */
+    pcie@68000000 {
+        reg = <0 0x68000000 0 0x1200000>,
+                <0 0x06000000 0 0x80000>,
+                <0 0x62000000 0 0x80000>;
+        /delete-property/ msi-map;
+        /delete-property/ iommu-map;
+    };

-        pcie@70000000 {
-            reg = <0 0x70000000 0 0x1200000>,
-                    <0 0x06000000 0 0x80000>,
-                    <0 0x60000000 0 0x80000>;
-            /delete-property/ msi-map;
-            /delete-property/ iommu-map;
-        };
+    pcie@70000000 {
+        reg = <0 0x70000000 0 0x1200000>,
+                <0 0x06000000 0 0x80000>,
+                <0 0x60000000 0 0x80000>;
+        /delete-property/ msi-map;
+        /delete-property/ iommu-map;
    };
 };
@@ -9,15 +9,17 @@ XEN_DEVICETREE_DTSI_MERGE_append_juno = " xen-juno.dtsi"
 # Add a dtb snippet to remove pmu and iommu in dom0 on N1SDP
 SRC_URI_append_n1sdp = " file://xen-n1sdp.dtsi"
 XEN_DEVICETREE_DTSI_MERGE_append_n1sdp = " xen-n1sdp.dtsi"
-# For N1SDP, the XEN_DEVICETREE_DEPEND and XEN_DEVICETREE_DTBS variables are
-# being set in meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/n1sdp-extra-settings.inc

 # Board specific configs
 XEN_DEVICETREE_DOM0_BOOTARGS_append_juno = " root=/dev/sda1 rootwait"
 XEN_DEVICETREE_XEN_BOOTARGS_append_juno = " console=dtuart dtuart=serial0 bootscrub=0 iommu=no"

-XEN_DEVICETREE_DOM0_BOOTARGS_append_n1sdp = " root=/dev/sda2 rootwait"
+XEN_DEVICETREE_DOM0_BOOTARGS_append_n1sdp = " root=/dev/sda1 rootwait"
 XEN_DEVICETREE_XEN_BOOTARGS_append_n1sdp = " console=dtuart dtuart=serial0 bootscrub=0 iommu=no"

 XEN_DEVICETREE_DOM0_BOOTARGS_append_fvp-base = " root=/dev/vda2"
 XEN_DEVICETREE_XEN_BOOTARGS_append_fvp-base = " console=dtuart dtuart=serial0 bootscrub=0"
+
+XEN_DEVICETREE_DOM0_BOOTARGS_append_foundation-armv8 = " root=/dev/vda2"
+XEN_DEVICETREE_XEN_BOOTARGS_append_foundation-armv8 = " console=dtuart dtuart=serial0 bootscrub=0"
+
@@ -0,0 +1,44 @@
+From a41feccdb6c03f12bddb4fb650a0465f0ed6eeca Mon Sep 17 00:00:00 2001
+From: Lukas Juenger <juenger@ice.rwth-aachen.de>
+Date: Fri, 5 Apr 2019 15:54:04 +0200
+Subject: [PATCH] xen/arm: Cap the number of interrupt lines for dom0
+
+Dom0 vGIC will use the same number of interrupt lines as the hardware GIC.
+While the hardware GIC can support up to 1020 interrupt lines,
+the vGIC is only supporting up to 992 interrupt lines.
+This means that Xen will not be able to boot on platforms where the hardware
+GIC supports more than 992 interrupt lines.
+While it would make sense to increase the limits in the vGICs, this is not
+trivial because of the design choices.
+At the moment, only models seem to report the maximum of interrupt lines.
+They also do not have any interrupt wired above the 992 limit.
+So it should be fine to cap the number of interrupt lines for dom0 to 992 lines.
+
+Signed-off-by: Lukas Juenger <juenger@ice.rwth-aachen.de>
+Acked-by: Julien Grall <julien.grall@arm.com>
+---
+ xen/arch/arm/setup.c | 8 +++++++-
+ 1 file changed, 7 insertions(+), 1 deletion(-)
+
+diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
+index 444857a967..ccb0f181ea 100644
+--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
+@@ -888,7 +888,13 @@ void __init start_xen(unsigned long boot_phys_offset,
+     /* Create initial domain 0. */
+     /* The vGIC for DOM0 is exactly emulating the hardware GIC */
+     dom0_cfg.arch.gic_version = XEN_DOMCTL_CONFIG_GIC_NATIVE;
+-    dom0_cfg.arch.nr_spis = gic_number_lines() - 32;
+    /*
+     * Xen vGIC supports a maximum of 992 interrupt lines.
+     * 32 are substracted to cover local IRQs.
+     */
+    dom0_cfg.arch.nr_spis = min(gic_number_lines(), (unsigned int) 992) - 32;
+    if ( gic_number_lines() > 992 )
+        printk(XENLOG_WARNING "Maximum number of vGIC IRQs exceeded.\n");
+     dom0_cfg.max_vcpus = dom0_max_vcpus();
+ 
+     dom0 = domain_create(0, &dom0_cfg, true);
+-- 
+2.17.1
+
@@ -1,2 +0,0 @@
-CONFIG_DEBUG=y
-CONFIG_EARLY_PRINTK_FASTMODEL=y
@@ -0,0 +1,73 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Xen/arm 4.12.0 Configuration
+#
+CONFIG_64BIT=y
+CONFIG_ARM_64=y
+CONFIG_ARM=y
+CONFIG_ARCH_DEFCONFIG="arch/arm/configs/arm64_defconfig"
+
+#
+# Architecture Features
+#
+CONFIG_NR_CPUS=128
+CONFIG_GICV3=y
+CONFIG_HVM=y
+# CONFIG_NEW_VGIC is not set
+CONFIG_SBSA_VUART_CONSOLE=y
+CONFIG_ARM_SSBD=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+
+#
+# ARM errata workaround via the alternative framework
+#
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_834220=y
+CONFIG_ARM64_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_ALL_PLAT=y
+# CONFIG_QEMU is not set
+# CONFIG_RCAR3 is not set
+# CONFIG_MPSOC is not set
+# CONFIG_NO_PLAT is not set
+CONFIG_ALL64_PLAT=y
+# CONFIG_ALL32_PLAT is not set
+CONFIG_MPSOC_PLATFORM=y
+
+#
+# Common Features
+#
+CONFIG_HAS_ALTERNATIVE=y
+CONFIG_HAS_DEVICE_TREE=y
+CONFIG_MEM_ACCESS=y
+CONFIG_HAS_PDX=y
+# CONFIG_XSM is not set
+CONFIG_SCHED_CREDIT=y
+CONFIG_SCHED_CREDIT2=y
+CONFIG_SCHED_RTDS=y
+# CONFIG_SCHED_ARINC653 is not set
+CONFIG_SCHED_NULL=y
+CONFIG_SCHED_DEFAULT="credit2"
+# CONFIG_LIVEPATCH is not set
+CONFIG_SUPPRESS_DUPLICATE_SYMBOL_WARNINGS=y
+CONFIG_CMDLINE=""
+CONFIG_DOM0_MEM=""
+
+#
+# Device Drivers
+#
+CONFIG_HAS_NS16550=y
+CONFIG_HAS_CADENCE_UART=y
+CONFIG_HAS_MVEBU=y
+CONFIG_HAS_PL011=y
+CONFIG_HAS_SCIF=y
+CONFIG_HAS_PASSTHROUGH=y
+CONFIG_ARM_SMMU=y
+CONFIG_DEFCONFIG_LIST="arch/arm/configs/arm64_defconfig"
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
@@ -0,0 +1,73 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Xen/arm 4.12.0 Configuration
+#
+CONFIG_64BIT=y
+CONFIG_ARM_64=y
+CONFIG_ARM=y
+CONFIG_ARCH_DEFCONFIG="arch/arm/configs/arm64_defconfig"
+
+#
+# Architecture Features
+#
+CONFIG_NR_CPUS=128
+CONFIG_GICV3=y
+CONFIG_HVM=y
+# CONFIG_NEW_VGIC is not set
+CONFIG_SBSA_VUART_CONSOLE=y
+CONFIG_ARM_SSBD=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+
+#
+# ARM errata workaround via the alternative framework
+#
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_834220=y
+CONFIG_ARM64_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_ALL_PLAT=y
+# CONFIG_QEMU is not set
+# CONFIG_RCAR3 is not set
+# CONFIG_MPSOC is not set
+# CONFIG_NO_PLAT is not set
+CONFIG_ALL64_PLAT=y
+# CONFIG_ALL32_PLAT is not set
+CONFIG_MPSOC_PLATFORM=y
+
+#
+# Common Features
+#
+CONFIG_HAS_ALTERNATIVE=y
+CONFIG_HAS_DEVICE_TREE=y
+CONFIG_MEM_ACCESS=y
+CONFIG_HAS_PDX=y
+# CONFIG_XSM is not set
+CONFIG_SCHED_CREDIT=y
+CONFIG_SCHED_CREDIT2=y
+CONFIG_SCHED_RTDS=y
+# CONFIG_SCHED_ARINC653 is not set
+CONFIG_SCHED_NULL=y
+CONFIG_SCHED_DEFAULT="credit2"
+# CONFIG_LIVEPATCH is not set
+CONFIG_SUPPRESS_DUPLICATE_SYMBOL_WARNINGS=y
+CONFIG_CMDLINE=""
+CONFIG_DOM0_MEM=""
+
+#
+# Device Drivers
+#
+CONFIG_HAS_NS16550=y
+CONFIG_HAS_CADENCE_UART=y
+CONFIG_HAS_MVEBU=y
+CONFIG_HAS_PL011=y
+CONFIG_HAS_SCIF=y
+CONFIG_HAS_PASSTHROUGH=y
+CONFIG_ARM_SMMU=y
+CONFIG_DEFCONFIG_LIST="arch/arm/configs/arm64_defconfig"
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
@@ -1,2 +0,0 @@
-CONFIG_DEBUG=y
-CONFIG_EARLY_PRINTK_JUNO=y
@@ -0,0 +1,100 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Xen/arm 4.12.2 Configuration
+#
+CONFIG_64BIT=y
+CONFIG_ARM_64=y
+CONFIG_ARM=y
+CONFIG_ARCH_DEFCONFIG="arch/arm/configs/arm64_defconfig"
+
+#
+# Architecture Features
+#
+CONFIG_NR_CPUS=128
+CONFIG_ACPI=y
+CONFIG_GICV3=y
+CONFIG_HAS_ITS=y
+CONFIG_HVM=y
+# CONFIG_NEW_VGIC is not set
+CONFIG_SBSA_VUART_CONSOLE=y
+CONFIG_ARM_SSBD=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+
+#
+# ARM errata workaround via the alternative framework
+#
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_834220=y
+CONFIG_ARM64_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_ALL_PLAT=y
+# CONFIG_QEMU is not set
+# CONFIG_RCAR3 is not set
+# CONFIG_MPSOC is not set
+# CONFIG_NO_PLAT is not set
+CONFIG_ALL64_PLAT=y
+# CONFIG_ALL32_PLAT is not set
+CONFIG_MPSOC_PLATFORM=y
+
+#
+# Common Features
+#
+CONFIG_HAS_ALTERNATIVE=y
+CONFIG_HAS_DEVICE_TREE=y
+# CONFIG_MEM_ACCESS is not set
+CONFIG_HAS_PDX=y
+# CONFIG_TMEM is not set
+CONFIG_XSM=y
+CONFIG_XSM_FLASK=y
+CONFIG_XSM_FLASK_AVC_STATS=y
+# CONFIG_XSM_FLASK_POLICY is not set
+CONFIG_XSM_SILO=y
+# CONFIG_XSM_DUMMY_DEFAULT is not set
+# CONFIG_XSM_FLASK_DEFAULT is not set
+CONFIG_XSM_SILO_DEFAULT=y
+# CONFIG_ARGO is not set
+
+#
+# Schedulers
+#
+CONFIG_SCHED_CREDIT=y
+CONFIG_SCHED_CREDIT2=y
+CONFIG_SCHED_RTDS=y
+# CONFIG_SCHED_ARINC653 is not set
+CONFIG_SCHED_NULL=y
+# CONFIG_SCHED_CREDIT_DEFAULT is not set
+CONFIG_SCHED_CREDIT2_DEFAULT=y
+# CONFIG_SCHED_RTDS_DEFAULT is not set
+# CONFIG_SCHED_NULL_DEFAULT is not set
+CONFIG_SCHED_DEFAULT="credit2"
+# CONFIG_LIVEPATCH is not set
+CONFIG_SUPPRESS_DUPLICATE_SYMBOL_WARNINGS=y
+CONFIG_CMDLINE=""
+CONFIG_DOM0_MEM=""
+
+#
+# Device Drivers
+#
+CONFIG_HAS_NS16550=y
+CONFIG_HAS_CADENCE_UART=y
+CONFIG_HAS_MVEBU=y
+CONFIG_HAS_PL011=y
+CONFIG_HAS_SCIF=y
+CONFIG_HAS_PASSTHROUGH=y
+CONFIG_ARM_SMMU=y
+CONFIG_DEFCONFIG_LIST="arch/arm/configs/arm64_defconfig"
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_COVERAGE is not set
+# CONFIG_LOCK_PROFILE is not set
+# CONFIG_PERF_COUNTERS is not set
+CONFIG_VERBOSE_DEBUG=y
+# CONFIG_DEVICE_TREE_DEBUG is not set
+# CONFIG_SCRUB_DEBUG is not set
@@ -1,3 +0,0 @@
-CONFIG_DEBUG=y
-CONFIG_EARLY_UART_CHOICE_PL011=y
-CONFIG_EARLY_UART_BASE_ADDRESS=0x2a400000
@@ -1,5 +0,0 @@
-CONFIG_EXPERT=y
-# Enable ACPI support
-CONFIG_ACPI=y
-# Enable ARM Interrupt Translation Service (ITS) emulation
-CONFIG_HAS_ITS=y
@@ -1,15 +1,32 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+
+# Machine specific settings
+XEN_CONFIG_EARLY_PRINTK_juno = "juno"
+XEN_CONFIG_EARLY_PRINTK_gem5-arm64 = "vexpress"
+XEN_CONFIG_EARLY_PRINTK_fvp-base = "fastmodel"
+XEN_CONFIG_EARLY_PRINTK_foundation-armv8 = "fastmodel"
+XEN_CONFIG_EARLY_PRINTK_n1sdp = "pl011,0x2a400000"
+
+# Foundation-armv8 support
+COMPATIBLE_MACHINE_foundation-armv8 = "foundation-armv8"
+
+SRC_URI_append_foundation-armv8 = " file://fvp/defconfig"
+
 # FVP Base support
 COMPATIBLE_MACHINE_fvp-base = "fvp-base"
-FILESEXTRAPATHS_prepend_fvp-base := "${THISDIR}/files:"
-SRC_URI_append_fvp-base = " file://early-printk.cfg"
+
+SRC_URI_append_fvp-base = " file://fvp/defconfig"

 # Juno support
 COMPATIBLE_MACHINE_juno = "juno"
-FILESEXTRAPATHS_prepend_juno := "${THISDIR}/files:"
-SRC_URI_append_juno = " file://early-printk.cfg"
+
+SRC_URI_append_juno = " file://juno/defconfig"
+
+# Gem5 support
+# Fix problem with number of interrupts on gem5
+SRC_URI_append_gem5-arm64 = " file://4.12.0/0001-xen-arm-Cap-the-number-of-interrupt-lines-for-dom0.patch"

 # N1SDP support
 COMPATIBLE_MACHINE_n1sdp = "n1sdp"
-FILESEXTRAPATHS_prepend_n1sdp := "${THISDIR}/files:"
-SRC_URI_append_n1sdp = " file://n1sdp.cfg \
-                         file://early-printk.cfg"
+
+SRC_URI_append_n1sdp = " file://n1sdp/defconfig"
@@ -0,0 +1,6 @@
+# Board specific configuration for the manager
+
+# FVP and Foundation are using vda as hard drive and partition 2 is the
+# default rootfs, so use vda3 for guest lvm
+XENGUEST_MANAGER_VOLUME_DEVICE_foundation-armv8 ?= "/dev/vda3"
+XENGUEST_MANAGER_VOLUME_DEVICE_fvp-base ?= "/dev/vda3"
@@ -0,0 +1,10 @@
+XENGUEST_NETWORK_BRIDGE_MEMBERS_n1sdp ?= "eth0"
+
+XENGUEST_NETWORK_BRIDGE_MEMBERS_fvp-base ?= "eth0"
+
+XENGUEST_NETWORK_BRIDGE_MEMBERS_foundation-armv8 ?= "eth0"
+
+XENGUEST_NETWORK_BRIDGE_MEMBERS_gem5-arm64 ?= "eth0"
+
+# Juno board has 2 network interfaces, add both of them to the bridge
+XENGUEST_NETWORK_BRIDGE_MEMBERS_juno ?= "eth0 eth1"
@@ -12,4 +12,6 @@ LINUX_ARM_AUTONOMY_DISABLE_ARM64_SVE = "${@bb.utils.contains_any('DISTRO_FEATURE
                                         'arm-autonomy-host arm-autonomy-guest', \
                                         ' features/arm-autonomy/disable-arm64-sve.scc','',d)}"

+KERNEL_FEATURES_append_gem5-arm64 = "${LINUX_ARM_AUTONOMY_DISABLE_ARM64_SVE}"
 KERNEL_FEATURES_append_fvp-base = "${LINUX_ARM_AUTONOMY_DISABLE_ARM64_SVE}"
+KERNEL_FEATURES_append_foundation-armv8 = "${LINUX_ARM_AUTONOMY_DISABLE_ARM64_SVE}"
@@ -1,14 +0,0 @@
-# short-description: Create an EFI disk image
-# long-description: Creates a partitioned EFI disk image that the user
-# can directly dd to boot media. Uses a custom grub.cfg file to configure the boot.
-
-# First boot partition normally populated as /dev/sda1
-part /boot --source bootimg-efi --sourceparams="loader=grub-efi" --ondisk sda --label msdos --active --align 1024
-
-# Second rootfs partition normally populated as /dev/sda2
-part / --source rootfs --ondisk sda --fstype=ext4 --label root --align 1024
-
-# Third partition to accomodate guests images normally populated as /dev/sda3 (used by XENGUEST_MANAGER_VOLUME_DEVICE)
-part --label guests --source empty --ondisk sda --size="${GUEST_PART_SIZE}${GUEST_PART_SIZE_UNIT}" --system-id 8e --align 1024
-
-bootloader --ptable msdos --configfile="${GRUB_CFG_FILE}"
@@ -1,28 +0,0 @@
-set term="vt100"
-set default="3"
-set timeout="5"
-
-set kernel_cmdline="earlycon=pl011,0x2A400000 console=ttyAMA0,115200 root=/dev/sda2 rootwait"
-
-menuentry 'N1SDP ACPI Boot' {
-    linux /Image $kernel_cmdline acpi=force
-}
-
-menuentry 'N1SDP Single-Chip Boot (Device Tree)' {
-    devicetree /n1sdp-single-chip.dtb
-    linux /Image $kernel_cmdline
-}
-
-menuentry 'N1SDP Multi-Chip Boot (Device Tree)' {
-    devicetree /n1sdp-multi-chip.dtb
-    linux /Image $kernel_cmdline
-}
-
-menuentry 'N1SDP Arm Autonomy (Xen) Single-Chip Boot (Device Tree)' {
-    # no_argumants under here is a workaround for a bug
-    # also any kernel or dom0 cmdline arguments has to be passed via dtb
-    # because any arguments put here will be ignored by xen
-    xen_hypervisor /xen.efi no_arguments=use_dtb_for_xen_or_kernel_cmdline
-    xen_module /Image
-    devicetree /n1sdp-single-chip-xen.dtb
-}
@@ -1,2 +0,0 @@
-CONFIG_DEBUG=y
-CONFIG_EARLY_PRINTK_VEXPRESS=y
@@ -1,4 +0,0 @@
-# gem5-arm64 support
-COMPATIBLE_MACHINE_gem5-arm64 = "gem5-arm64"
-FILESEXTRAPATHS_prepend_gem5-arm64 := "${THISDIR}/files:"
-SRC_URI_append_gem5-arm64 = " file://early-printk.cfg"
@@ -1 +0,0 @@
-XENGUEST_NETWORK_BRIDGE_MEMBERS_gem5-arm64 ?= "eth0"
@@ -1,4 +0,0 @@
-# We need to turn off SVE support in the Linux kernel otherwise Xen is stopping
-# Linux kernel with a coredump while trying to access ZEN bit of CPACR1 core
-# register.
-# CONFIG_ARM64_SVE is not set
@@ -1,3 +0,0 @@
-define KFEATURE_DESCRIPTION "Disable SVE support"
-
-kconf non-hardware disable-arm64-sve.cfg
@@ -1,15 +0,0 @@
-FILESEXTRAPATHS_prepend_gem5-arm64 := "${THISDIR}:"
-
-#
-# arm-autonomy kmeta extra
-#
-SRC_URI_append_gem5-arm64 = " file://arm-autonomy-kmeta-extra-gem5;type=kmeta;name=arm-autonomy-kmeta-extra-gem5;destsuffix=arm-autonomy-kmeta-extra-gem5"
-
-# We need to turn off SVE support in the Linux kernel otherwise Xen is stopping
-# Linux kernel with a coredump while trying to access XEN bit of CPACR1 core
-# register.
-LINUX_ARM_AUTONOMY_DISABLE_ARM64_SVE_gem5-arm64 = "${@bb.utils.contains_any('DISTRO_FEATURES', \
-                                         'arm-autonomy-host arm-autonomy-guest', \
-                                         ' features/arm-autonomy/disable-arm64-sve.scc','',d)}"
-
-KERNEL_FEATURES_append_gem5-arm64 = "${LINUX_ARM_AUTONOMY_DISABLE_ARM64_SVE}"
@@ -1 +0,0 @@
-GRUB_BUILDIN += "${@bb.utils.contains('DISTRO_FEATURES', 'xen', 'xen_boot', '', d)}"
@@ -1,4 +0,0 @@
-For now, arm-autonomy-host-image-minimal installs the dhcp-server package and
-the dchp-4.4.2 depends on bind 9.11 which recipe was copied from oe-core tree
-https://git.openembedded.org/openembedded-core/tree/meta/recipes-connectivity/bind?id=087e4fafeef82cfd3d71402d6b200fe831f48697
-since it got removed in the https://git.openembedded.org/openembedded-core/commit/meta/recipes-connectivity?id=29949cd7cf3a660fb3bcf251f5127a4cdb2804ec patch.
@@ -1,27 +0,0 @@
-From 31dde3562f287429eea94b77250d184818b49063 Mon Sep 17 00:00:00 2001
-From: Chen Qi <Qi.Chen@windriver.com>
-Date: Mon, 15 Oct 2018 16:55:09 +0800
-Subject: [PATCH] avoid start failure with bind user
-
-Upstream-Status: Pending
-
-Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
---
- init.d | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/init.d b/init.d
-index b2eec60..6e03936 100644
--- a/init.d
-+++ b/init.d
-@@ -57,6 +57,7 @@ case "$1" in
- 	modprobe capability >/dev/null 2>&1 || true
- 	if [ ! -f /etc/bind/rndc.key ]; then
- 	    /usr/sbin/rndc-confgen -a -b 512 -r /dev/urandom
-+	    chown root:bind /etc/bind/rndc.key >/dev/null 2>&1 || true
- 	    chmod 0640 /etc/bind/rndc.key
- 	fi
- 	if [ -f /var/run/named/named.pid ]; then
-- 
-2.7.4
-
@@ -1,30 +0,0 @@
-From 2325a92f1896a2a7f586611686801b41fbc91b50 Mon Sep 17 00:00:00 2001
-From: Hongxu Jia <hongxu.jia@windriver.com>
-Date: Mon, 27 Aug 2018 15:00:51 +0800
-Subject: [PATCH] configure.in: remove useless `-L$use_openssl/lib'
-
-Since `--with-openssl=${STAGING_DIR_HOST}${prefix}' is used in bind recipe,
-the `-L$use_openssl/lib' has a hardcoded suffix, removing it is harmless
-and helpful for clean up host build path in isc-config.sh
-
-Upstream-Status: Inappropriate [oe-core specific]
-
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
-
---
- configure.ac | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/configure.ac b/configure.ac
-index e85a5c6..2bbfc58 100644
--- a/configure.ac
-+++ b/configure.ac
-@@ -1631,7 +1631,7 @@ If you don't want OpenSSL, use --without-openssl])
- 				fi
- 				;;
- 			*)
-				DST_OPENSSL_LIBS="-L$use_openssl/lib -lcrypto"
-+				DST_OPENSSL_LIBS="-lcrypto"
- 				;;
- 			esac
- 		fi
@@ -1,34 +0,0 @@
-From a3af4a405baf5ff582e82aaba392dd9667d94bdc Mon Sep 17 00:00:00 2001
-From: Hongxu Jia <hongxu.jia@windriver.com>
-Date: Mon, 27 Aug 2018 21:24:20 +0800
-Subject: [PATCH] `named/lwresd -V' and start log hide build options
-
-The build options expose build path directories, so hide them.
-[snip]
-$ named -V
-|built by make with *** (options are hidden)
-[snip]
-
-Upstream-Status: Inappropriate [oe-core specific]
-
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
---
- bin/named/include/named/globals.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/bin/named/include/named/globals.h b/bin/named/include/named/globals.h
-index ba3457e..7741da7 100644
--- a/bin/named/include/named/globals.h
-+++ b/bin/named/include/named/globals.h
-@@ -68,7 +68,7 @@ EXTERN const char *		ns_g_version		INIT(VERSION);
- EXTERN const char *		ns_g_product		INIT(PRODUCT);
- EXTERN const char *		ns_g_description	INIT(DESCRIPTION);
- EXTERN const char *		ns_g_srcid		INIT(SRCID);
-EXTERN const char *		ns_g_configargs		INIT(CONFIGARGS);
-+EXTERN const char *		ns_g_configargs		INIT("*** (options are hidden)");
- EXTERN const char *		ns_g_builder		INIT(BUILDER);
- EXTERN in_port_t		ns_g_port		INIT(0);
- EXTERN isc_dscp_t		ns_g_dscp		INIT(-1);
-- 
-2.7.4
-
@@ -1,47 +0,0 @@
-From edda20fb5a6e88548f85e39d34d6c074306e15bc Mon Sep 17 00:00:00 2001
-From: Paul Gortmaker <paul.gortmaker@windriver.com>
-Date: Tue, 9 Jun 2015 11:22:00 -0400
-Subject: [PATCH] bind: ensure searching for json headers searches sysroot
-
-Bind can fail configure by detecting headers w/o libs[1], or
-it can fail the host contamination check as per below:
-
-ERROR: This autoconf log indicates errors, it looked at host include and/or library paths while determining system capabilities.
-Rerun configure task after fixing this. The path was 'build/tmp/work/core2-64-poky-linux/bind/9.10.2-r1/build'
-ERROR: Function failed: do_qa_configure
-ERROR: Logfile of failure stored in: build/tmp/work/core2-64-poky-linux/bind/9.10.2-r1/temp/log.do_configure.5242
-ERROR: Task 5 (meta/recipes-connectivity/bind/bind_9.10.2.bb, do_configure) failed with exit code '1'
-NOTE: Tasks Summary: Attempted 773 tasks of which 768 didn't need to be rerun and 1 failed.
-No currently running tasks (773 of 781)
-
-Summary: 1 task failed:
-  /meta/recipes-connectivity/bind/bind_9.10.2.bb, do_configure
-
-One way to fix it would be to unconditionally disable json in bind
-configure[2] but here we fix it by using the path to where we would
-put the header if we had json in the sysroot, in case someone wants
-to make use of the combination some day.
-
-[1] https://trac.macports.org/ticket/45305
-[2] https://trac.macports.org/changeset/126406
-
-Upstream-Status: Inappropriate [OE Specific]
-Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
---
- configure.ac | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/configure.ac b/configure.ac
-index 17392fd..e85a5c6 100644
--- a/configure.ac
-+++ b/configure.ac
-@@ -2449,7 +2449,7 @@ case "$use_libjson" in
- 		libjson_libs=""
- 		;;
- 	auto|yes)
-		for d in /usr /usr/local /opt/local
-+		for d in "${STAGING_INCDIR}"
- 		do
- 			if test -f "${d}/include/json/json.h"
- 			then
@@ -1,2 +0,0 @@
-# startup options for the server
-OPTIONS="-u bind"
@@ -1,330 +0,0 @@
-Upstream-Status: Inappropriate [configuration]
-
-the patch is imported from openembedded project
-
-11/30/2010 - Qing He <qing.he@intel.com>
-
-diff -urN bind-9.3.1.orig/conf/db.0 bind-9.3.1/conf/db.0
--- bind-9.3.1.orig/conf/db.0	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/db.0	2005-07-10 22:14:00.000000000 +0200
-@@ -0,0 +1,12 @@
-+;
-+; BIND reverse data file for broadcast zone
-+;
-+$TTL	604800
-+@	IN	SOA	localhost. root.localhost. (
-+			      1		; Serial
-+			 604800		; Refresh
-+			  86400		; Retry
-+			2419200		; Expire
-+			 604800 )	; Negative Cache TTL
-+;
-+@	IN	NS	localhost.
-diff -urN bind-9.3.1.orig/conf/db.127 bind-9.3.1/conf/db.127
--- bind-9.3.1.orig/conf/db.127	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/db.127	2005-07-10 22:14:00.000000000 +0200
-@@ -0,0 +1,13 @@
-+;
-+; BIND reverse data file for local loopback interface
-+;
-+$TTL	604800
-+@	IN	SOA	localhost. root.localhost. (
-+			      1		; Serial
-+			 604800		; Refresh
-+			  86400		; Retry
-+			2419200		; Expire
-+			 604800 )	; Negative Cache TTL
-+;
-+@	IN	NS	localhost.
-+1.0.0	IN	PTR	localhost.
-diff -urN bind-9.3.1.orig/conf/db.empty bind-9.3.1/conf/db.empty
--- bind-9.3.1.orig/conf/db.empty	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/db.empty	2005-07-10 22:14:00.000000000 +0200
-@@ -0,0 +1,14 @@
-+; BIND reverse data file for empty rfc1918 zone
-+;
-+; DO NOT EDIT THIS FILE - it is used for multiple zones.
-+; Instead, copy it, edit named.conf, and use that copy.
-+;
-+$TTL	86400
-+@	IN	SOA	localhost. root.localhost. (
-+			      1		; Serial
-+			 604800		; Refresh
-+			  86400		; Retry
-+			2419200		; Expire
-+			  86400 )	; Negative Cache TTL
-+;
-+@	IN	NS	localhost.
-diff -urN bind-9.3.1.orig/conf/db.255 bind-9.3.1/conf/db.255
--- bind-9.3.1.orig/conf/db.255	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/db.255	2005-07-10 22:14:00.000000000 +0200
-@@ -0,0 +1,12 @@
-+;
-+; BIND reserve data file for broadcast zone
-+;
-+$TTL	604800
-+@	IN	SOA	localhost. root.localhost. (
-+			      1		; Serial
-+			 604800		; Refresh
-+			  86400		; Retry
-+			2419200		; Expire
-+			 604800 )	; Negative Cache TTL
-+;
-+@	IN	NS	localhost.
-diff -urN bind-9.3.1.orig/conf/db.local bind-9.3.1/conf/db.local
--- bind-9.3.1.orig/conf/db.local	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/db.local	2005-07-10 22:14:00.000000000 +0200
-@@ -0,0 +1,13 @@
-+;
-+; BIND data file for local loopback interface
-+;
-+$TTL	604800
-+@	IN	SOA	localhost. root.localhost. (
-+			      1		; Serial
-+			 604800		; Refresh
-+			  86400		; Retry
-+			2419200		; Expire
-+			 604800 )	; Negative Cache TTL
-+;
-+@	IN	NS	localhost.
-+@	IN	A	127.0.0.1
-diff -urN bind-9.3.1.orig/conf/db.root bind-9.3.1/conf/db.root
--- bind-9.3.1.orig/conf/db.root	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/db.root	2005-07-10 22:14:00.000000000 +0200
-@@ -0,0 +1,45 @@
-+
-+; <<>> DiG 9.2.3 <<>> ns . @a.root-servers.net.
-+;; global options:  printcmd
-+;; Got answer:
-+;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 18944
-+;; flags: qr aa rd; QUERY: 1, ANSWER: 13, AUTHORITY: 0, ADDITIONAL: 13
-+
-+;; QUESTION SECTION:
-+;.				IN	NS
-+
-+;; ANSWER SECTION:
-+.			518400	IN	NS	A.ROOT-SERVERS.NET.
-+.			518400	IN	NS	B.ROOT-SERVERS.NET.
-+.			518400	IN	NS	C.ROOT-SERVERS.NET.
-+.			518400	IN	NS	D.ROOT-SERVERS.NET.
-+.			518400	IN	NS	E.ROOT-SERVERS.NET.
-+.			518400	IN	NS	F.ROOT-SERVERS.NET.
-+.			518400	IN	NS	G.ROOT-SERVERS.NET.
-+.			518400	IN	NS	H.ROOT-SERVERS.NET.
-+.			518400	IN	NS	I.ROOT-SERVERS.NET.
-+.			518400	IN	NS	J.ROOT-SERVERS.NET.
-+.			518400	IN	NS	K.ROOT-SERVERS.NET.
-+.			518400	IN	NS	L.ROOT-SERVERS.NET.
-+.			518400	IN	NS	M.ROOT-SERVERS.NET.
-+
-+;; ADDITIONAL SECTION:
-+A.ROOT-SERVERS.NET.	3600000	IN	A	198.41.0.4
-+B.ROOT-SERVERS.NET.	3600000	IN	A	192.228.79.201
-+C.ROOT-SERVERS.NET.	3600000	IN	A	192.33.4.12
-+D.ROOT-SERVERS.NET.	3600000	IN	A	128.8.10.90
-+E.ROOT-SERVERS.NET.	3600000	IN	A	192.203.230.10
-+F.ROOT-SERVERS.NET.	3600000	IN	A	192.5.5.241
-+G.ROOT-SERVERS.NET.	3600000	IN	A	192.112.36.4
-+H.ROOT-SERVERS.NET.	3600000	IN	A	128.63.2.53
-+I.ROOT-SERVERS.NET.	3600000	IN	A	192.36.148.17
-+J.ROOT-SERVERS.NET.	3600000	IN	A	192.58.128.30
-+K.ROOT-SERVERS.NET.	3600000	IN	A	193.0.14.129
-+L.ROOT-SERVERS.NET.	3600000	IN	A	198.32.64.12
-+M.ROOT-SERVERS.NET.	3600000	IN	A	202.12.27.33
-+
-+;; Query time: 81 msec
-+;; SERVER: 198.41.0.4#53(a.root-servers.net.)
-+;; WHEN: Sun Feb  1 11:27:14 2004
-+;; MSG SIZE  rcvd: 436
-+
-diff -urN bind-9.3.1.orig/conf/named.conf bind-9.3.1/conf/named.conf
--- bind-9.3.1.orig/conf/named.conf	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/named.conf	2005-07-10 22:33:46.000000000 +0200
-@@ -0,0 +1,49 @@
-+// This is the primary configuration file for the BIND DNS server named.
-+//
-+// If you are just adding zones, please do that in /etc/bind/named.conf.local
-+
-+include "/etc/bind/named.conf.options";
-+
-+// prime the server with knowledge of the root servers
-+zone "." {
-+	type hint;
-+	file "/etc/bind/db.root";
-+};
-+
-+// be authoritative for the localhost forward and reverse zones, and for
-+// broadcast zones as per RFC 1912
-+
-+zone "localhost" {
-+	type master;
-+	file "/etc/bind/db.local";
-+};
-+
-+zone "127.in-addr.arpa" {
-+	type master;
-+	file "/etc/bind/db.127";
-+};
-+
-+zone "0.in-addr.arpa" {
-+	type master;
-+	file "/etc/bind/db.0";
-+};
-+
-+zone "255.in-addr.arpa" {
-+	type master;
-+	file "/etc/bind/db.255";
-+};
-+
-+// zone "com" { type delegation-only; };
-+// zone "net" { type delegation-only; };
-+
-+// From the release notes:
-+//  Because many of our users are uncomfortable receiving undelegated answers
-+//  from root or top level domains, other than a few for whom that behaviour
-+//  has been trusted and expected for quite some length of time, we have now
-+//  introduced the "root-delegations-only" feature which applies delegation-only
-+//  logic to all top level domains, and to the root domain.  An exception list
-+//  should be specified, including "MUSEUM" and "DE", and any other top level
-+//  domains from whom undelegated responses are expected and trusted.
-+// root-delegation-only exclude { "DE"; "MUSEUM"; };
-+
-+include "/etc/bind/named.conf.local";
-diff -urN bind-9.3.1.orig/conf/named.conf.local bind-9.3.1/conf/named.conf.local
--- bind-9.3.1.orig/conf/named.conf.local	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/named.conf.local	2005-07-10 22:14:06.000000000 +0200
-@@ -0,0 +1,8 @@
-+//
-+// Do any local configuration here
-+//
-+
-+// Consider adding the 1918 zones here, if they are not used in your
-+// organization
-+//include "/etc/bind/zones.rfc1918";
-+
-diff -urN bind-9.3.1.orig/conf/named.conf.options bind-9.3.1/conf/named.conf.options
--- bind-9.3.1.orig/conf/named.conf.options	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/named.conf.options	2005-07-10 22:14:06.000000000 +0200
-@@ -0,0 +1,24 @@
-+options {
-+	directory "/var/cache/bind";
-+
-+	// If there is a firewall between you and nameservers you want
-+	// to talk to, you might need to uncomment the query-source
-+	// directive below.  Previous versions of BIND always asked
-+	// questions using port 53, but BIND 8.1 and later use an unprivileged
-+	// port by default.
-+
-+	// query-source address * port 53;
-+
-+	// If your ISP provided one or more IP addresses for stable 
-+	// nameservers, you probably want to use them as forwarders.  
-+	// Uncomment the following block, and insert the addresses replacing 
-+	// the all-0's placeholder.
-+
-+	// forwarders {
-+	// 	0.0.0.0;
-+	// };
-+
-+	auth-nxdomain no;    # conform to RFC1035
-+
-+};
-+
-diff -urN bind-9.3.1.orig/conf/zones.rfc1918 bind-9.3.1/conf/zones.rfc1918
--- bind-9.3.1.orig/conf/zones.rfc1918	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/zones.rfc1918	2005-07-10 22:14:10.000000000 +0200
-@@ -0,0 +1,20 @@
-+zone "10.in-addr.arpa"      { type master; file "/etc/bind/db.empty"; };
-+ 
-+zone "16.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "17.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "18.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "19.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "20.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "21.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "22.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "23.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "24.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "25.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "26.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "27.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "28.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "29.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "30.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "31.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+
-+zone "168.192.in-addr.arpa" { type master; file "/etc/bind/db.empty"; };
-diff -urN bind-9.3.1.orig/init.d bind-9.3.1/init.d
--- bind-9.3.1.orig/init.d	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/init.d	2005-07-10 23:09:58.000000000 +0200
-@@ -0,0 +1,70 @@
-+#!/bin/sh
-+
-+PATH=/sbin:/bin:/usr/sbin:/usr/bin
-+
-+# for a chrooted server: "-u bind -t /var/lib/named"
-+# Don't modify this line, change or create /etc/default/bind9.
-+OPTIONS=""
-+
-+test -f /etc/default/bind9 && . /etc/default/bind9
-+
-+test -x /usr/sbin/rndc || exit 0
-+
-+case "$1" in
-+    start)
-+	echo -n "Starting domain name service: named"
-+
-+	modprobe capability >/dev/null 2>&1 || true
-+	if [ ! -f /etc/bind/rndc.key ]; then
-+	    /usr/sbin/rndc-confgen -a -b 512 -r /dev/urandom
-+	    chmod 0640 /etc/bind/rndc.key
-+	fi
-+	if [ -f /var/run/named/named.pid ]; then
-+	    ps `cat /var/run/named/named.pid` > /dev/null && exit 1
-+	fi
-+
-+	# dirs under /var/run can go away on reboots.
-+	mkdir -p /var/run/named
-+	mkdir -p /var/cache/bind
-+	chmod 775 /var/run/named
-+	chown root:bind /var/run/named >/dev/null 2>&1 || true
-+
-+	if [ ! -x /usr/sbin/named ]; then
-+	    echo "named binary missing - not starting"
-+	    exit 1
-+	fi
-+	if start-stop-daemon --start --quiet --exec /usr/sbin/named \
-+		--pidfile /var/run/named/named.pid -- $OPTIONS; then
-+	    if [ -x /sbin/resolvconf ] ; then
-+		echo "nameserver 127.0.0.1" | /sbin/resolvconf -a lo
-+	    fi
-+	fi
-+	echo "."	
-+    ;;
-+
-+    stop)
-+	echo -n "Stopping domain name service: named"
-+	if [ -x /sbin/resolvconf ]; then
-+	    /sbin/resolvconf -d lo
-+	fi
-+	/usr/sbin/rndc stop >/dev/null 2>&1
-+	echo "."	
-+    ;;
-+
-+    reload)
-+	/usr/sbin/rndc reload
-+    ;;
-+
-+    restart|force-reload)
-+	$0 stop
-+	sleep 2
-+	$0 start
-+    ;;
-+    
-+    *)
-+	echo "Usage: /etc/init.d/bind {start|stop|reload|restart|force-reload}" >&2
-+	exit 1
-+    ;;
-+esac
-+
-+exit 0
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-if [ ! -s /etc/bind/rndc.key ]; then
-    echo -n "Generating /etc/bind/rndc.key:"
-    /usr/sbin/rndc-confgen -a -b 512 -r /dev/urandom
-    chown root:bind /etc/bind/rndc.key
-    chmod 0640 /etc/bind/rndc.key
-fi
@@ -1,65 +0,0 @@
-Subject: init.d: add support for read-only rootfs
-
-Upstream-Status: Inappropriate [oe specific]
-
-Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
---
- init.d |   40 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 40 insertions(+)
-
-diff --git a/init.d b/init.d
-index 0111ed4..24677c8 100644
--- a/init.d
-+++ b/init.d
-@@ -6,8 +6,48 @@ PATH=/sbin:/bin:/usr/sbin:/usr/bin
- # Don't modify this line, change or create /etc/default/bind9.
- OPTIONS=""
- 
-+test -f /etc/default/rcS && . /etc/default/rcS
- test -f /etc/default/bind9 && . /etc/default/bind9
- 
-+# This function is here because it's possible that /var and / are on different partitions.
-+is_on_read_only_partition () {
-+    DIRECTORY=$1
-+    dir=`readlink -f $DIRECTORY`
-+    while true; do
-+	if [ ! -d "$dir" ]; then
-+	    echo "ERROR: $dir is not a directory"
-+	    exit 1
-+	else
-+	    for flag in `awk -v dir=$dir '{ if ($2 == dir) { print "FOUND"; split($4,FLAGS,",") } }; \
-+		END { for (f in FLAGS) print FLAGS[f] }' < /proc/mounts`; do
-+		[ "$flag" = "FOUND" ] && partition="read-write"
-+		[ "$flag" = "ro" ] && { partition="read-only"; break; }
-+	    done
-+	    if [ "$dir" = "/" -o -n "$partition" ]; then
-+		break
-+	    else
-+		dir=`dirname $dir`
-+	    fi
-+	fi
-+    done
-+    [ "$partition" = "read-only" ] && echo "yes" || echo "no"
-+}
-+
-+bind_mount () {
-+    olddir=$1
-+    newdir=$2
-+    mkdir -p $olddir
-+    cp -a $newdir/* $olddir
-+    mount --bind $olddir $newdir
-+}
-+
-+# Deal with read-only rootfs
-+if [ "$ROOTFS_READ_ONLY" = "yes" ]; then
-+    [ "$VERBOSE" != "no" ] && echo "WARN: start bind service in read-only rootfs"
-+    [ `is_on_read_only_partition /etc/bind` = "yes" ] && bind_mount /var/volatile/bind/etc /etc/bind
-+    [ `is_on_read_only_partition /var/named` = "yes" ] && bind_mount /var/volatile/bind/named /var/named
-+fi
-+
- test -x /usr/sbin/rndc || exit 0
- 
- case "$1" in
-- 
-1.7.9.5
-
@@ -1,42 +0,0 @@
-bind: make "/etc/init.d/bind stop" work
-
-Upstream-Status: Inappropriate [configuration]
-
-Add some configurations, make rndc command be able to controls
-the named daemon.
-
-Signed-off-by: Roy Li <rongqing.li@windriver.com>
---
- conf/named.conf |    5 +++++
- conf/rndc.conf  |    5 +++++
- 2 files changed, 10 insertions(+), 0 deletions(-)
- create mode 100644 conf/rndc.conf
-
-diff --git a/conf/named.conf b/conf/named.conf
-index 95829cf..c8899e7 100644
--- a/conf/named.conf
-+++ b/conf/named.conf
-@@ -47,3 +47,8 @@ zone "255.in-addr.arpa" {
- // root-delegation-only exclude { "DE"; "MUSEUM"; };
- 
- include "/etc/bind/named.conf.local";
-+include "/etc/bind/rndc.key" ;
-+controls {
-+	inet 127.0.0.1 allow { localhost; }
-+	keys { rndc-key; };
-+};
-diff --git a/conf/rndc.conf b/conf/rndc.conf
-new file mode 100644
-index 0000000..a0b481d
--- /dev/null
-+++ b/conf/rndc.conf
-@@ -0,0 +1,5 @@
-+include "/etc/bind/rndc.key";
-+options {
-+	default-server  localhost;
-+	default-key     rndc-key;
-+};
-
-- 
-1.7.5.4
-
@@ -1,22 +0,0 @@
-[Unit]
-Description=Berkeley Internet Name Domain (DNS)
-Wants=nss-lookup.target
-Before=nss-lookup.target
-After=network.target
-
-[Service]
-Type=forking
-EnvironmentFile=-/etc/default/bind9
-PIDFile=/run/named/named.pid
-
-ExecStartPre=@SBINDIR@/generate-rndc-key.sh
-ExecStart=@SBINDIR@/named $OPTIONS
-
-ExecReload=@BASE_BINDIR@/sh -c '@SBINDIR@/rndc reload > /dev/null 2>&1 || @BASE_BINDIR@/kill -HUP $MAINPID'
-
-ExecStop=@BASE_BINDIR@/sh -c '@SBINDIR@/rndc stop > /dev/null 2>&1 || @BASE_BINDIR@/kill -TERM $MAINPID'
-
-PrivateTmp=true
-
-[Install]
-WantedBy=multi-user.target
@@ -1,140 +0,0 @@
-SUMMARY = "ISC Internet Domain Name Server"
-HOMEPAGE = "http://www.isc.org/sw/bind/"
-SECTION = "console/network"
-
-LICENSE = "ISC & BSD"
-LIC_FILES_CHKSUM = "file://COPYRIGHT;md5=bf39058a7f64b2a934ce14dc9ec1dd45"
-
-DEPENDS = "openssl libcap zlib"
-
-SRC_URI = "https://ftp.isc.org/isc/bind9/${PV}/${BPN}-${PV}.tar.gz \
-           file://conf.patch \
-           file://named.service \
-           file://bind9 \
-           file://generate-rndc-key.sh \
-           file://make-etc-initd-bind-stop-work.patch \
-           file://init.d-add-support-for-read-only-rootfs.patch \
-           file://bind-ensure-searching-for-json-headers-searches-sysr.patch \
-           file://0001-configure.in-remove-useless-L-use_openssl-lib.patch \
-           file://0001-named-lwresd-V-and-start-log-hide-build-options.patch \
-           file://0001-avoid-start-failure-with-bind-user.patch \
-           "
-
-SRC_URI[sha256sum] = "afc6d8015006f1cabf699ff19f517bb8fd9c1811e5231f26baf51c3550262ac9"
-
-UPSTREAM_CHECK_URI = "https://ftp.isc.org/isc/bind9/"
-# stay at 9.11 until 9.16, from 9.16 follow the ESV versions divisible by 4
-UPSTREAM_CHECK_REGEX = "(?P<pver>9.(11|16|20|24|28)(\.\d+)+(-P\d+)*)/"
-
-# BIND >= 9.11.2 need dhcpd >= 4.4.0,
-# don't report it here since dhcpd is already recent enough.
-CVE_CHECK_WHITELIST += "CVE-2019-6470"
-
-inherit autotools update-rc.d systemd useradd pkgconfig multilib_script multilib_header
-
-MULTILIB_SCRIPTS = "${PN}:${bindir}/bind9-config ${PN}:${bindir}/isc-config.sh"
-
-# PACKAGECONFIGs readline and libedit should NOT be set at same time
-PACKAGECONFIG ?= "readline"
-PACKAGECONFIG[httpstats] = "--with-libxml2=${STAGING_DIR_HOST}${prefix},--without-libxml2,libxml2"
-PACKAGECONFIG[readline] = "--with-readline=-lreadline,,readline"
-PACKAGECONFIG[libedit] = "--with-readline=-ledit,,libedit"
-PACKAGECONFIG[urandom] = "--with-randomdev=/dev/urandom,--with-randomdev=/dev/random,,"
-PACKAGECONFIG[python3] = "--with-python=yes --with-python-install-dir=${PYTHON_SITEPACKAGES_DIR} , --without-python, python3-ply-native,"
-
-ENABLE_IPV6 = "--enable-ipv6=${@bb.utils.contains('DISTRO_FEATURES', 'ipv6', 'yes', 'no', d)}"
-EXTRA_OECONF = " ${ENABLE_IPV6} --with-libtool --enable-threads \
-                 --disable-devpoll --enable-epoll --with-gost=no \
-                 --with-gssapi=no --with-ecdsa=yes --with-eddsa=no \
-                 --with-lmdb=no \
-                 --sysconfdir=${sysconfdir}/bind \
-                 --with-openssl=${STAGING_DIR_HOST}${prefix} \
-               "
-
-inherit ${@bb.utils.contains('PACKAGECONFIG', 'python3', 'python3native distutils3-base', '', d)}
-
-# dhcp needs .la so keep them
-REMOVE_LIBTOOL_LA = "0"
-
-USERADD_PACKAGES = "${PN}"
-USERADD_PARAM_${PN} = "--system --home ${localstatedir}/cache/bind --no-create-home \
-                       --user-group bind"
-
-INITSCRIPT_NAME = "bind"
-INITSCRIPT_PARAMS = "defaults"
-
-SYSTEMD_SERVICE_${PN} = "named.service"
-
-do_install_prepend() {
-	# clean host path in isc-config.sh before the hardlink created
-	# by "make install":
-	#   bind9-config -> isc-config.sh
-	sed -i -e "s,${STAGING_LIBDIR},${libdir}," ${B}/isc-config.sh
-}
-
-do_install_append() {
-
-	rmdir "${D}${localstatedir}/run"
-	rmdir --ignore-fail-on-non-empty "${D}${localstatedir}"
-	install -d -o bind "${D}${localstatedir}/cache/bind"
-	install -d "${D}${sysconfdir}/bind"
-	install -d "${D}${sysconfdir}/init.d"
-	install -m 644 ${S}/conf/* "${D}${sysconfdir}/bind/"
-	install -m 755 "${S}/init.d" "${D}${sysconfdir}/init.d/bind"
-        if ${@bb.utils.contains('PACKAGECONFIG', 'python3', 'true', 'false', d)}; then
-		sed -i -e '1s,#!.*python3,#! /usr/bin/python3,' \
-		${D}${sbindir}/dnssec-coverage \
-		${D}${sbindir}/dnssec-checkds \
-		${D}${sbindir}/dnssec-keymgr
-	fi
-
-	# Install systemd related files
-	install -d ${D}${sbindir}
-	install -m 755 ${WORKDIR}/generate-rndc-key.sh ${D}${sbindir}
-	install -d ${D}${systemd_unitdir}/system
-	install -m 0644 ${WORKDIR}/named.service ${D}${systemd_unitdir}/system
-	sed -i -e 's,@BASE_BINDIR@,${base_bindir},g' \
-	       -e 's,@SBINDIR@,${sbindir},g' \
-	       ${D}${systemd_unitdir}/system/named.service
-
-	install -d ${D}${sysconfdir}/default
-	install -m 0644 ${WORKDIR}/bind9 ${D}${sysconfdir}/default
-
-	if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
-		install -d ${D}${sysconfdir}/tmpfiles.d
-		echo "d /run/named 0755 bind bind - -" > ${D}${sysconfdir}/tmpfiles.d/bind.conf
-	fi
-
-    oe_multilib_header isc/platform.h
-}
-
-CONFFILES_${PN} = " \
-	${sysconfdir}/bind/named.conf \
-	${sysconfdir}/bind/named.conf.local \
-	${sysconfdir}/bind/named.conf.options \
-	${sysconfdir}/bind/db.0 \
-	${sysconfdir}/bind/db.127 \
-	${sysconfdir}/bind/db.empty \
-	${sysconfdir}/bind/db.local \
-	${sysconfdir}/bind/db.root \
-	"
-
-ALTERNATIVE_${PN}-utils = "nslookup"
-ALTERNATIVE_LINK_NAME[nslookup] = "${bindir}/nslookup"
-ALTERNATIVE_PRIORITY = "100"
-
-PACKAGE_BEFORE_PN += "${PN}-utils"
-FILES_${PN}-utils = "${bindir}/host ${bindir}/dig ${bindir}/mdig ${bindir}/nslookup ${bindir}/nsupdate"
-FILES_${PN}-dev += "${bindir}/isc-config.h"
-FILES_${PN} += "${sbindir}/generate-rndc-key.sh"
-
-PACKAGE_BEFORE_PN += "${PN}-libs"
-FILES_${PN}-libs = "${libdir}/*.so*"
-FILES_${PN}-staticdev += "${libdir}/*.la"
-
-PACKAGE_BEFORE_PN += "${@bb.utils.contains('PACKAGECONFIG', 'python3', 'python3-bind', '', d)}"
-FILES_python3-bind = "${sbindir}/dnssec-coverage ${sbindir}/dnssec-checkds \
-                ${sbindir}/dnssec-keymgr ${PYTHON_SITEPACKAGES_DIR}"
-
-RDEPENDS_${PN}-dev = ""
-RDEPENDS_python3-bind = "python3-core python3-ply"
@@ -1,3 +0,0 @@
-For now, arm-autonomy-host-image-minimal installs the dhcp-server package and
-the dchp recipe was copied from oe-core tree https://git.openembedded.org/openembedded-core/tree/meta/recipes-connectivity/dhcp?id=087e4fafeef82cfd3d71402d6b200fe831f48697
-since it got removed in the https://git.openembedded.org/openembedded-core/commit/meta/recipes-connectivity?id=7e3357892f204788162747e907d68f857118cf42 patch.
@@ -1,149 +0,0 @@
-SECTION = "console/network"
-SUMMARY = "Internet Software Consortium DHCP package"
-DESCRIPTION = "DHCP (Dynamic Host Configuration Protocol) is a protocol \
-which allows individual devices on an IP network to get their own \
-network configuration information from a server.  DHCP helps make it \
-easier to administer devices."
-
-HOMEPAGE = "http://www.isc.org/"
-
-LICENSE = "ISC"
-LIC_FILES_CHKSUM = "file://LICENSE;beginline=4;md5=004a4db50a1e20972e924a8618747c01"
-
-DEPENDS = "openssl bind"
-
-SRC_URI = "http://ftp.isc.org/isc/dhcp/${PV}/dhcp-${PV}.tar.gz \
-           file://init-relay file://default-relay \
-           file://init-server file://default-server \
-           file://dhclient.conf file://dhcpd.conf \
-           file://dhclient-systemd-wrapper \
-           file://dhclient.service \
-           file://dhcpd.service file://dhcrelay.service \
-           file://dhcpd6.service \
-           "
-UPSTREAM_CHECK_URI = "http://ftp.isc.org/isc/dhcp/"
-UPSTREAM_CHECK_REGEX = "(?P<pver>\d+\.\d+\.(\d+?))/"
-
-inherit autotools-brokensep systemd useradd update-rc.d
-
-USERADD_PACKAGES = "${PN}-server"
-USERADD_PARAM_${PN}-server = "--system --no-create-home --home-dir /var/run/${BPN} --shell /bin/false --user-group ${BPN}"
-
-SYSTEMD_PACKAGES = "${PN}-server ${PN}-relay ${PN}-client"
-SYSTEMD_SERVICE_${PN}-server = "dhcpd.service dhcpd6.service"
-SYSTEMD_AUTO_ENABLE_${PN}-server = "disable"
-
-SYSTEMD_SERVICE_${PN}-relay = "dhcrelay.service"
-SYSTEMD_AUTO_ENABLE_${PN}-relay = "disable"
-
-SYSTEMD_SERVICE_${PN}-client = "dhclient.service"
-SYSTEMD_AUTO_ENABLE_${PN}-client = "disable"
-
-INITSCRIPT_PACKAGES = "dhcp-server"
-INITSCRIPT_NAME_dhcp-server = "dhcp-server"
-INITSCRIPT_PARAMS_dhcp-server = "defaults"
-
-CFLAGS += "-D_GNU_SOURCE"
-EXTRA_OECONF = "--with-srv-lease-file=${localstatedir}/lib/dhcp/dhcpd.leases \
-                --with-srv6-lease-file=${localstatedir}/lib/dhcp/dhcpd6.leases \
-                --with-cli-lease-file=${localstatedir}/lib/dhcp/dhclient.leases \
-                --with-cli6-lease-file=${localstatedir}/lib/dhcp/dhclient6.leases \
-                --enable-paranoia --disable-static \
-                --with-randomdev=/dev/random \
-                --with-libbind=${STAGING_DIR_HOST} \
-		--enable-libtool \
-               "
-
-#Enable shared libs per dhcp README
-do_configure_prepend () {
-	cp configure.ac+lt configure.ac
-}
-
-do_install_append () {
-	install -d ${D}${sysconfdir}/init.d
-	install -d ${D}${sysconfdir}/default
-	install -d ${D}${sysconfdir}/dhcp
-	install -m 0755 ${WORKDIR}/init-relay ${D}${sysconfdir}/init.d/dhcp-relay
-	install -m 0644 ${WORKDIR}/default-relay ${D}${sysconfdir}/default/dhcp-relay
-	install -m 0755 ${WORKDIR}/init-server ${D}${sysconfdir}/init.d/dhcp-server
-	install -m 0644 ${WORKDIR}/default-server ${D}${sysconfdir}/default/dhcp-server
-
-	rm -f ${D}${sysconfdir}/dhclient.conf*
-	rm -f ${D}${sysconfdir}/dhcpd.conf*
-	install -m 0644 ${WORKDIR}/dhclient.conf ${D}${sysconfdir}/dhcp/dhclient.conf
-	install -m 0644 ${WORKDIR}/dhcpd.conf ${D}${sysconfdir}/dhcp/dhcpd.conf
-
-	install -d ${D}${base_sbindir}/
-	if [ "${sbindir}" != "${base_sbindir}" ]; then
-		mv ${D}${sbindir}/dhclient ${D}${base_sbindir}/
-	fi
-	install -m 0755 ${S}/client/scripts/linux ${D}${base_sbindir}/dhclient-script
-
-	# Install systemd unit files
-	install -d ${D}${systemd_unitdir}/system
-	install -m 0644 ${WORKDIR}/dhcpd.service ${D}${systemd_unitdir}/system
-	install -m 0644 ${WORKDIR}/dhcpd6.service ${D}${systemd_unitdir}/system
-	install -m 0644 ${WORKDIR}/dhcrelay.service ${D}${systemd_unitdir}/system
-	sed -i -e 's,@SBINDIR@,${sbindir},g' ${D}${systemd_unitdir}/system/dhcpd*.service ${D}${systemd_unitdir}/system/dhcrelay.service
-	sed -i -e 's,@SYSCONFDIR@,${sysconfdir},g' ${D}${systemd_unitdir}/system/dhcpd*.service
-	sed -i -e 's,@base_bindir@,${base_bindir},g' ${D}${systemd_unitdir}/system/dhcpd*.service
-	sed -i -e 's,@localstatedir@,${localstatedir},g' ${D}${systemd_unitdir}/system/dhcpd*.service
-	sed -i -e 's,@SYSCONFDIR@,${sysconfdir},g' ${D}${systemd_unitdir}/system/dhcrelay.service
-
-	install -d ${D}${base_sbindir}
-	install -m 0755 ${WORKDIR}/dhclient-systemd-wrapper ${D}${base_sbindir}/dhclient-systemd-wrapper
-	install -m 0644 ${WORKDIR}/dhclient.service ${D}${systemd_unitdir}/system
-	sed -i -e 's,@SYSCONFDIR@,${sysconfdir},g' ${D}${systemd_unitdir}/system/dhclient.service
-	sed -i -e 's,@BASE_SBINDIR@,${base_sbindir},g' ${D}${systemd_unitdir}/system/dhclient.service
-}
-
-PACKAGES += "dhcp-libs dhcp-server dhcp-server-config dhcp-client dhcp-relay dhcp-omshell"
-
-PACKAGES_remove = "${PN}"
-RDEPENDS_${PN}-client += "${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'iproute2', '', d)}"
-RDEPENDS_${PN}-dev = ""
-RDEPENDS_${PN}-staticdev = ""
-FILES_${PN}-libs = "${libdir}/libdhcpctl.so.0* ${libdir}/libomapi.so.0* ${libdir}/libdhcp.so.0*"
-
-FILES_${PN}-server = "${sbindir}/dhcpd ${sysconfdir}/init.d/dhcp-server"
-RRECOMMENDS_${PN}-server = "dhcp-server-config"
-
-FILES_${PN}-server-config = "${sysconfdir}/default/dhcp-server ${sysconfdir}/dhcp/dhcpd.conf"
-
-FILES_${PN}-relay = "${sbindir}/dhcrelay ${sysconfdir}/init.d/dhcp-relay ${sysconfdir}/default/dhcp-relay"
-
-FILES_${PN}-client = "${base_sbindir}/dhclient \
-                      ${base_sbindir}/dhclient-script \
-                      ${sysconfdir}/dhcp/dhclient.conf \
-                      ${base_sbindir}/dhclient-systemd-wrapper \
-                     "
-
-FILES_${PN}-omshell = "${bindir}/omshell"
-
-pkg_postinst_dhcp-server() {
-    mkdir -p $D/${localstatedir}/lib/dhcp
-    touch $D/${localstatedir}/lib/dhcp/dhcpd.leases
-    touch $D/${localstatedir}/lib/dhcp/dhcpd6.leases
-}
-
-pkg_postinst_dhcp-client() {
-    mkdir -p $D/${localstatedir}/lib/dhcp
-}
-
-pkg_postrm_dhcp-server() {
-    rm -f $D/${localstatedir}/lib/dhcp/dhcpd.leases
-    rm -f $D/${localstatedir}/lib/dhcp/dhcpd6.leases
-
-    if ! rmdir $D/${localstatedir}/lib/dhcp 2>/dev/null; then
-        echo "Not removing ${localstatedir}/lib/dhcp as it is non-empty."
-    fi
-}
-
-pkg_postrm_dhcp-client() {
-    rm -f $D/${localstatedir}/lib/dhcp/dhclient.leases
-    rm -f $D/${localstatedir}/lib/dhcp/dhclient6.leases
-
-    if ! rmdir $D/${localstatedir}/lib/dhcp 2>/dev/null; then
-        echo "Not removing ${localstatedir}/lib/dhcp as it is non-empty."
-    fi
-}
@@ -1,27 +0,0 @@
-From 7cc29144535a622fc671dc86eb1da65b0473a7c4 Mon Sep 17 00:00:00 2001
-From: Hongxu Jia <hongxu.jia@windriver.com>
-Date: Tue, 15 Aug 2017 16:14:22 +0800
-Subject: [PATCH 01/11] define macro _PATH_DHCPD_CONF and _PATH_DHCLIENT_CONF
-
-Upstream-Status: Inappropriate [OE specific]
-
-Rebase to 4.3.6
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
---
- includes/site.h | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-Index: dhcp-4.4.1/includes/site.h
-===================================================================
--- dhcp-4.4.1.orig/includes/site.h
-+++ dhcp-4.4.1/includes/site.h
-@@ -148,7 +148,8 @@
- /* Define this if you want the dhcpd.conf file to go somewhere other than
-    the default location.   By default, it goes in /etc/dhcpd.conf. */
- 
-/* #define _PATH_DHCPD_CONF	"/etc/dhcpd.conf" */
-+#define _PATH_DHCPD_CONF	"/etc/dhcp/dhcpd.conf"
-+#define _PATH_DHCLIENT_CONF	"/etc/dhcp/dhclient.conf"
- 
- /* Network API definitions.   You do not need to choose one of these - if
-    you don't choose, one will be chosen for you in your system's config
@@ -1,65 +0,0 @@
-From eec0503cfc36f63d777f5cb3f2719cecedcb8468 Mon Sep 17 00:00:00 2001
-From: Haris Okanovic <haris.okanovic@ni.com>
-Date: Mon, 7 Jan 2019 13:22:09 -0600
-Subject: [PATCH] Workaround busybox limitation in Linux dhclient-script
-
-Busybox is a lightweight implementation of coreutils commonly used on
-space-constrained embedded Linux distributions. It's implementation of
-chown and chmod doesn't provide a "--reference" option added to
-client/scripts/linux as of commit 9261cb14. This change works around
-that limitation by using stat to read ownership and permissions flags
-and simple chown/chmod calls supported in both coreutils and busybox.
-
-    modified:   client/scripts/linux
-
-Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
-Upstream-Status: Pending [ISC-Bugs #48771]
---
- client/scripts/linux | 17 +++++++++++++----
- 1 file changed, 13 insertions(+), 4 deletions(-)
-
-diff --git a/client/scripts/linux b/client/scripts/linux
-index 0c429697..2435a44b 100755
--- a/client/scripts/linux
-+++ b/client/scripts/linux
-@@ -32,6 +32,17 @@
- # if your system holds ip tool in a non-standard location.
- ip=/sbin/ip
- 
-+chown_chmod_by_reference() {
-+    local reference_file="$1"
-+    local target_file="$2"
-+
-+    local owner=$(stat -c "%u:%g" "$reference_file")
-+    local perm=$(stat -c "%a" "$reference_file")
-+
-+    chown "$owner" "$target_file"
-+    chmod "$perm" "$target_file"
-+}
-+
- # update /etc/resolv.conf based on received values
- # This updated version mostly follows Debian script by Andrew Pollock et al.
- make_resolv_conf() {
-@@ -74,8 +85,7 @@ make_resolv_conf() {
-         fi
- 
- 	if [ -f /etc/resolv.conf ]; then
-	    chown --reference=/etc/resolv.conf $new_resolv_conf
-	    chmod --reference=/etc/resolv.conf $new_resolv_conf
-+	    chown_chmod_by_reference /etc/resolv.conf $new_resolv_conf
- 	fi
-         mv -f $new_resolv_conf /etc/resolv.conf
-     # DHCPv6
-@@ -101,8 +111,7 @@ make_resolv_conf() {
-         fi
- 
- 	if [ -f /etc/resolv.conf ]; then
-            chown --reference=/etc/resolv.conf $new_resolv_conf
-            chmod --reference=/etc/resolv.conf $new_resolv_conf
-+	    chown_chmod_by_reference /etc/resolv.conf $new_resolv_conf
- 	fi
-         mv -f $new_resolv_conf /etc/resolv.conf
-     fi
-- 
-2.20.0
-
@@ -1,117 +0,0 @@
-From be7540d31c356e80ee02e90e8bf162b7ac6e5ba5 Mon Sep 17 00:00:00 2001
-From: Hongxu Jia <hongxu.jia@windriver.com>
-Date: Tue, 15 Aug 2017 14:56:56 +0800
-Subject: [PATCH 02/11] dhclient dbus
-
-Upstream-Status: Inappropriate [distribution]
-
-Rebase to 4.3.6
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
---
- client/scripts/bsdos   | 5 +++++
- client/scripts/freebsd | 5 +++++
- client/scripts/linux   | 5 +++++
- client/scripts/netbsd  | 5 +++++
- client/scripts/openbsd | 5 +++++
- client/scripts/solaris | 5 +++++
- 6 files changed, 30 insertions(+)
-
-diff --git a/client/scripts/bsdos b/client/scripts/bsdos
-index d69d0d8..095b143 100755
--- a/client/scripts/bsdos
-+++ b/client/scripts/bsdos
-@@ -45,6 +45,11 @@ exit_with_hooks() {
-     . /etc/dhclient-exit-hooks
-   fi
- # probably should do something with exit status of the local script
-+  if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+    dbus-send --system --dest=com.redhat.dhcp \
-+      --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+      'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+  fi
-   exit $exit_status
- }
- 
-diff --git a/client/scripts/freebsd b/client/scripts/freebsd
-index 8f3e2a2..ad7fb44 100755
--- a/client/scripts/freebsd
-+++ b/client/scripts/freebsd
-@@ -89,6 +89,11 @@ exit_with_hooks() {
-     . /etc/dhclient-exit-hooks
-   fi
- # probably should do something with exit status of the local script
-+  if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+    dbus-send --system --dest=com.redhat.dhcp \
-+      --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+      'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+  fi
-   exit $exit_status
- }
- 
-diff --git a/client/scripts/linux b/client/scripts/linux
-index 5fb1612..3d447b6 100755
--- a/client/scripts/linux
-+++ b/client/scripts/linux
-@@ -174,6 +174,11 @@ exit_with_hooks() {
-         exit_status=$?
-     fi
- 
-+    if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+        dbus-send --system --dest=com.redhat.dhcp \
-+           --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+           'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+    fi
-     exit $exit_status
- }
- 
-diff --git a/client/scripts/netbsd b/client/scripts/netbsd
-index 07383b7..aaba8e8 100755
--- a/client/scripts/netbsd
-+++ b/client/scripts/netbsd
-@@ -45,6 +45,11 @@ exit_with_hooks() {
-     . /etc/dhclient-exit-hooks
-   fi
- # probably should do something with exit status of the local script
-+  if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+    dbus-send --system --dest=com.redhat.dhcp \
-+      --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+      'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+  fi
-   exit $exit_status
- }
- 
-diff --git a/client/scripts/openbsd b/client/scripts/openbsd
-index e7f4746..56b980c 100644
--- a/client/scripts/openbsd
-+++ b/client/scripts/openbsd
-@@ -45,6 +45,11 @@ exit_with_hooks() {
-     . /etc/dhclient-exit-hooks
-   fi
- # probably should do something with exit status of the local script
-+  if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+    dbus-send --system --dest=com.redhat.dhcp \
-+      --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+      'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+  fi
-   exit $exit_status
- }
- 
-diff --git a/client/scripts/solaris b/client/scripts/solaris
-index af553b9..4a2aa69 100755
--- a/client/scripts/solaris
-+++ b/client/scripts/solaris
-@@ -26,6 +26,11 @@ exit_with_hooks() {
-     . /etc/dhclient-exit-hooks
-   fi
- # probably should do something with exit status of the local script
-+  if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+    dbus-send --system --dest=com.redhat.dhcp \
-+      --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+      'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+  fi
-   exit $exit_status
- }
- 
-- 
-1.8.3.1
-
@@ -1,35 +0,0 @@
-From d80bd792323dbd56269309f85b4506eb6b1b60e9 Mon Sep 17 00:00:00 2001
-From: Andrei Gherzan <andrei@gherzan.ro>
-Date: Tue, 15 Aug 2017 15:05:47 +0800
-Subject: [PATCH 03/11] link with lcrypto
-
-From 4.2.0 final release, -lcrypto check was removed and we compile
-static libraries
-from bind that are linked to libcrypto. This is why i added a patch in
-order to add
-lcrypto to LIBS.
-
-Upstream-Status: Pending
-Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
-
-Rebase to 4.3.6
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
---
- configure.ac | 4 ++++
- 1 file changed, 4 insertions(+)
-
-Index: dhcp-4.4.1/configure.ac
-===================================================================
--- dhcp-4.4.1.orig/configure.ac
-+++ dhcp-4.4.1/configure.ac
-@@ -612,6 +612,10 @@ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]],
- # Look for optional headers.
- AC_CHECK_HEADERS(sys/socket.h net/if_dl.h net/if6.h regex.h)
- 
-+# find an MD5 library
-+AC_SEARCH_LIBS(MD5_Init, [crypto])
-+AC_SEARCH_LIBS(MD5Init, [crypto])
-+
- # Solaris needs some libraries for functions
- AC_SEARCH_LIBS(socket, [socket])
- AC_SEARCH_LIBS(inet_ntoa, [nsl])
@@ -1,95 +0,0 @@
-From cccec0344d68dac4100b6f260ee24e7c2da9dfda Mon Sep 17 00:00:00 2001
-From: Hongxu Jia <hongxu.jia@windriver.com>
-Date: Tue, 15 Aug 2017 15:08:22 +0800
-Subject: [PATCH 04/11] Fix out of tree builds
-
-Upstream-Status: Pending
-
-RP 2013/03/21
-
-Rebase to 4.3.6
-
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
---
- client/Makefile.am  | 4 ++--
- common/Makefile.am  | 3 ++-
- dhcpctl/Makefile.am | 2 ++
- omapip/Makefile.am  | 1 +
- relay/Makefile.am   | 2 +-
- server/Makefile.am  | 2 +-
- 6 files changed, 9 insertions(+), 5 deletions(-)
-
-Index: dhcp-4.4.1/common/Makefile.am
-===================================================================
--- dhcp-4.4.1.orig/common/Makefile.am
-+++ dhcp-4.4.1/common/Makefile.am
-@@ -1,4 +1,5 @@
-AM_CPPFLAGS = -I$(top_srcdir) -DLOCALSTATEDIR='"@localstatedir@"'
-+AM_CPPFLAGS = -I$(top_srcdir)/includes -I$(top_srcdir) -DLOCALSTATEDIR='"@localstatedir@"'
-+
- AM_CFLAGS = $(LDAP_CFLAGS)
- 
- lib_LIBRARIES = libdhcp.a
-Index: dhcp-4.4.1/dhcpctl/Makefile.am
-===================================================================
--- dhcp-4.4.1.orig/dhcpctl/Makefile.am
-+++ dhcp-4.4.1/dhcpctl/Makefile.am
-@@ -3,6 +3,8 @@ BINDLIBDNSDIR=@BINDLIBDNSDIR@
- BINDLIBISCCFGDIR=@BINDLIBISCCFGDIR@
- BINDLIBISCDIR=@BINDLIBISCDIR@
- 
-+AM_CPPFLAGS = -I$(top_srcdir)/includes -I$(top_srcdir)
-+
- bin_PROGRAMS = omshell
- lib_LIBRARIES = libdhcpctl.a
- noinst_PROGRAMS = cltest
-Index: dhcp-4.4.1/server/Makefile.am
-===================================================================
--- dhcp-4.4.1.orig/server/Makefile.am
-+++ dhcp-4.4.1/server/Makefile.am
-@@ -4,7 +4,7 @@
- # production code. Sadly, we are not there yet.
- SUBDIRS = . tests
- 
-AM_CPPFLAGS = -I.. -DLOCALSTATEDIR='"@localstatedir@"'
-+AM_CPPFLAGS = -I$(top_srcdir) -DLOCALSTATEDIR='"@localstatedir@"' -I$(top_srcdir)/includes
- 
- dist_sysconf_DATA = dhcpd.conf.example
- sbin_PROGRAMS = dhcpd
-Index: dhcp-4.4.1/client/Makefile.am
-===================================================================
--- dhcp-4.4.1.orig/client/Makefile.am
-+++ dhcp-4.4.1/client/Makefile.am
-@@ -5,7 +5,7 @@
- SUBDIRS = . tests
- 
- AM_CPPFLAGS = -DCLIENT_PATH='"PATH=$(sbindir):/sbin:/bin:/usr/sbin:/usr/bin"'
-AM_CPPFLAGS += -DLOCALSTATEDIR='"$(localstatedir)"'
-+AM_CPPFLAGS += -DLOCALSTATEDIR='"$(localstatedir)"' -I$(top_srcdir)/includes
- 
- dist_sysconf_DATA = dhclient.conf.example
- sbin_PROGRAMS = dhclient
-Index: dhcp-4.4.1/omapip/Makefile.am
-===================================================================
--- dhcp-4.4.1.orig/omapip/Makefile.am
-+++ dhcp-4.4.1/omapip/Makefile.am
-@@ -2,6 +2,7 @@ BINDLIBIRSDIR=@BINDLIBIRSDIR@
- BINDLIBDNSDIR=@BINDLIBDNSDIR@
- BINDLIBISCCFGDIR=@BINDLIBISCCFGDIR@
- BINDLIBISCDIR=@BINDLIBISCDIR@
-+AM_CPPFLAGS = -I$(top_srcdir)/includes
- 
- lib_LIBRARIES = libomapi.a
- noinst_PROGRAMS = svtest
-Index: dhcp-4.4.1/relay/Makefile.am
-===================================================================
--- dhcp-4.4.1.orig/relay/Makefile.am
-+++ dhcp-4.4.1/relay/Makefile.am
-@@ -1,6 +1,6 @@
- SUBDIRS = . tests
-
-AM_CPPFLAGS = -DLOCALSTATEDIR='"@localstatedir@"'
-+AM_CPPFLAGS = -DLOCALSTATEDIR='"@localstatedir@"' -I$(top_srcdir)/includes
-
- sbin_PROGRAMS = dhcrelay
- dhcrelay_SOURCES = dhcrelay.c
@@ -1,36 +0,0 @@
-From 2e8ff0e4f6d39e346ea86b8c514ab4ccc78fa359 Mon Sep 17 00:00:00 2001
-From: Hongxu Jia <hongxu.jia@windriver.com>
-Date: Tue, 15 Aug 2017 15:24:14 +0800
-Subject: [PATCH 05/11] dhcp-client: fix invoke dhclient-script failed on
- Read-only file system
-
-In read-only file system, '/etc' is on the readonly partition,
-and '/etc/resolv.conf' is symlinked to a separate writable
-partition.
-
-In this situation, we create temp files 'resolv.conf.dhclient-new'
-in /tmp dir.
-
-Upstream-Status: Pending
-
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
---
- client/scripts/linux | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/client/scripts/linux b/client/scripts/linux
-index 3d447b6..3122a75 100755
--- a/client/scripts/linux
-+++ b/client/scripts/linux
-@@ -40,7 +40,7 @@ make_resolv_conf() {
-     # DHCPv4
-     if [ -n "$new_domain_search" ] || [ -n "$new_domain_name" ] ||
-        [ -n "$new_domain_name_servers" ]; then
-        new_resolv_conf=/etc/resolv.conf.dhclient-new
-+        new_resolv_conf=/tmp/resolv.conf.dhclient-new
-         rm -f $new_resolv_conf
- 
-         if [ -n "$new_domain_name" ]; then
-- 
-1.8.3.1
-
@@ -1,62 +0,0 @@
-From 7107511fd209f08f9a96f8938041ae48f3295895 Mon Sep 17 00:00:00 2001
-From: Christopher Larson <chris_larson@mentor.com>
-Date: Tue, 15 Aug 2017 16:17:49 +0800
-Subject: [PATCH 07/11] Add configure argument to make the libxml2 dependency
- explicit and determinisitic.
-
-Upstream-Status: Pending
-
-Signed-off-by: Christopher Larson <chris_larson@mentor.com>
-
-Rebase to 4.3.6
-
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
---
- configure.ac | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-Index: dhcp-4.4.1/configure.ac
-===================================================================
--- dhcp-4.4.1.orig/configure.ac
-+++ dhcp-4.4.1/configure.ac
-@@ -642,6 +642,17 @@ if test "$have_nanosleep" = "rt"; then
- 	LIBS="-lrt $LIBS"
- fi
- 
-+AC_ARG_WITH(libxml2,
-+	AS_HELP_STRING([--with-libxml2], [link against libxml2. this is needed if bind was built with xml2 support enabled]),
-+	with_libxml2="$withval", with_libxml2="no")
-+
-+if test x$with_libxml2 != xno; then
-+	AC_SEARCH_LIBS(xmlTextWriterStartElement, [xml2],
-+		[if test x$with_libxml2 != xauto; then
-+			AC_MSG_FAILURE([*** Cannot find xmlTextWriterStartElement with -lxml2 and libxml2 was requested])
-+		fi])
-+fi
-+
- # check for /dev/random (declares HAVE_DEV_RANDOM)
- AC_MSG_CHECKING(for random device)
- AC_ARG_WITH(randomdev,
-Index: dhcp-4.4.1/configure.ac+lt
-===================================================================
--- dhcp-4.4.1.orig/configure.ac+lt
-+++ dhcp-4.4.1/configure.ac+lt
-@@ -909,6 +909,18 @@ elif test "$want_libtool" = "yes" -a "$u
- fi
- AM_CONDITIONAL(INSTALL_BIND, test "$want_install_bind" = "yes")
- 
-+AC_ARG_WITH(libxml2,
-+	AS_HELP_STRING([--with-libxml2], [link against libxml2. this is needed if bind was built with xml2 support enabled]),
-+	with_libxml2="$withval", with_libxml2="no")
-+
-+if test x$with_libxml2 != xno; then
-+	AC_SEARCH_LIBS(xmlTextWriterStartElement, [xml2],,
-+		[if test x$with_libxml2 != xauto; then
-+			AC_MSG_FAILURE([*** Cannot find xmlTextWriterStartElement with -lxml2 and libxml2 was requested])
-+		fi])
-+fi
-+
-+
- # OpenLDAP support.
- AC_ARG_WITH(ldap,
-     AS_HELP_STRING([--with-ldap],[enable OpenLDAP support in dhcpd (default is no)]),
@@ -1,28 +0,0 @@
-From f3f8b7726e50e24ef3edf5fa5a17e31d39118d7e Mon Sep 17 00:00:00 2001
-From: Andre McCurdy <armccurdy@gmail.com>
-Date: Tue, 15 Aug 2017 15:49:31 +0800
-Subject: [PATCH 09/11] remove dhclient-script bash dependency
-
-Upstream-Status: Inappropriate [OE specific]
-
-Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
-
-Rebase to 4.3.6
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
---
- client/scripts/linux | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/client/scripts/linux b/client/scripts/linux
-index 3122a75..1712d7d 100755
--- a/client/scripts/linux
-+++ b/client/scripts/linux
-@@ -1,4 +1,4 @@
-#!/bin/bash
-+#!/bin/sh
- # dhclient-script for Linux. Dan Halbert, March, 1997.
- # Updated for Linux 2.[12] by Brian J. Murrell, January 1999.
- # No guarantees about this. I'm a novice at the details of Linux
-- 
-1.8.3.1
-
@@ -1,34 +0,0 @@
-From 501543b3ef715488a142e3d301ff2733aa33eec7 Mon Sep 17 00:00:00 2001
-From: Awais Belal <awais_belal@mentor.com>
-Date: Wed, 25 Oct 2017 21:00:05 +0500
-Subject: [PATCH] dhcp: correct the intention for xml2 lib search
-
-A missing case breaks the build when libxml2 is
-required and found appropriately. The third argument
-to the function AC_SEARCH_LIB is action-if-found which
-was mistakenly been used for the case where the library
-is not found and hence breaks the configure phase
-where it shoud actually pass.
-We now pass on silently when action-if-found is
-executed.
-
-Upstream-Status: Pending
-
-Signed-off-by: Awais Belal <awais_belal@mentor.com>
---
- configure.ac | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-Index: dhcp-4.4.1/configure.ac
-===================================================================
--- dhcp-4.4.1.orig/configure.ac
-+++ dhcp-4.4.1/configure.ac
-@@ -647,7 +647,7 @@ AC_ARG_WITH(libxml2,
- 	with_libxml2="$withval", with_libxml2="no")
- 
- if test x$with_libxml2 != xno; then
-	AC_SEARCH_LIBS(xmlTextWriterStartElement, [xml2],
-+	AC_SEARCH_LIBS(xmlTextWriterStartElement, [xml2],,
- 		[if test x$with_libxml2 != xauto; then
- 			AC_MSG_FAILURE([*** Cannot find xmlTextWriterStartElement with -lxml2 and libxml2 was requested])
- 		fi])
@@ -1,64 +0,0 @@
-lib and include path is hardcoded for use_libbind 
-
-use libdir and includedir vars
-
-Upstream-Status: Pending
-Signed-off-by: Armin Kuster <akuster808@gmail.com>
-
-Index: dhcp-4.4.1/configure.ac+lt
-===================================================================
--- dhcp-4.4.1.orig/configure.ac+lt
-+++ dhcp-4.4.1/configure.ac+lt
-@@ -801,22 +801,22 @@ no)
- 	if test ! -d "$use_libbind"; then
- 		AC_MSG_ERROR([Cannot find bind directory at $use_libbind])
- 	fi
-	if test ! -d "$use_libbind/include" -o \
-	        ! -f "$use_libbind/include/isc/buffer.h"
-+	if test ! -d "$use_libbind/$includedir" -o \
-+	        ! -f "$use_libbind/$includedir/isc/buffer.h"
- 	then
-		AC_MSG_ERROR([Cannot find bind includes at $use_libbind/include])
-+		AC_MSG_ERROR([Cannot find bind includes at $use_libbind/$includedir])
- 	fi
-	if test	! -d "$use_libbind/lib" -o \
-	        \( ! -f "$use_libbind/lib/libisc.a" -a \
-		   ! -f	"$use_libbind/lib/libisc.la" \)
-+	if test	! -d "$use_libbind/$libdir" -o \
-+	        \( ! -f "$use_libbind/$libdir/libisc.a" -a \
-+		   ! -f	"$use_libbind/$libdir/libisc.la" \)
- 	then
-		AC_MSG_ERROR([Cannot find bind libraries at $use_libbind/lib])
-+		AC_MSG_ERROR([Cannot find bind libraries at $use_libbind/$libdir])
- 	fi
- 	BINDDIR="$use_libbind"
-	BINDLIBIRSDIR="$BINDDIR/lib"
-	BINDLIBDNSDIR="$BINDDIR/lib"
-	BINDLIBISCCFGDIR="$BINDDIR/lib"
-	BINDLIBISCDIR="$BINDDIR/lib"	
-+	BINDLIBIRSDIR="$BINDDIR/$libdir"
-+	BINDLIBDNSDIR="$BINDDIR/$libdir"
-+	BINDLIBISCCFGDIR="$BINDDIR/$libdir"
-+	BINDLIBISCDIR="$BINDDIR/$libdir"
- 	DISTCHECK_LIBBIND_CONFIGURE_FLAG="--with-libbind=$use_libbind"
- 	;;
- esac
-@@ -856,14 +856,14 @@ AC_ARG_ENABLE(libtool,
- 
- if test "$use_libbind" != "no"; then
- 	if test "$want_libtool" = "yes" -a \
-	        ! -f "$use_libbind/lib/libisc.la"
-+	        ! -f "$use_libbind/$libdir/libisc.la"
- 	then
-		AC_MSG_ERROR([Cannot find dynamic libraries at $use_libbind/lib])
-+		AC_MSG_ERROR([Cannot find dynamic libraries at $use_libbind/$libdir])
- 	fi
- 	if test "$want_libtool" = "no" -a \
-	        ! -f "$use_libbind/lib/libisc.a"
-+	        ! -f "$use_libbind/$libdir/libisc.a"
- 	then
-		AC_MSG_ERROR([Cannot find static libraries at $use_libbind/lib])
-+		AC_MSG_ERROR([Cannot find static libraries at $use_libbind/$libdir])
- 	fi
- fi
- 
@@ -1,23 +0,0 @@
-require dhcp.inc
-
-SRC_URI += "file://0001-define-macro-_PATH_DHCPD_CONF-and-_PATH_DHCLIENT_CON.patch \
-            file://0002-dhclient-dbus.patch \
-            file://0003-link-with-lcrypto.patch \
-            file://0004-Fix-out-of-tree-builds.patch \
-            file://0005-dhcp-client-fix-invoke-dhclient-script-failed-on-Rea.patch \
-            file://0007-Add-configure-argument-to-make-the-libxml2-dependenc.patch \
-            file://0009-remove-dhclient-script-bash-dependency.patch \
-            file://0012-dhcp-correct-the-intention-for-xml2-lib-search.patch \
-            file://0013-fixup_use_libbind.patch \
-            file://0001-workaround-busybox-limitation-in-linux-dhclient-script.patch \
-"
-
-SRC_URI[md5sum] = "2afdaf8498dc1edaf3012efdd589b3e1"
-SRC_URI[sha256sum] = "1a7ccd64a16e5e68f7b5e0f527fd07240a2892ea53fe245620f4f5f607004521"
-
-LDFLAGS_append = " -pthread"
-
-PACKAGECONFIG ?= ""
-PACKAGECONFIG[bind-httpstats] = "--with-libxml2,--without-libxml2,libxml2"
-
-CFLAGS += "-fcommon"
@@ -1,12 +0,0 @@
-# Defaults for dhcp-relay initscript
-# sourced by /etc/init.d/dhcp-relay
-
-# What servers should the DHCP relay forward requests to?
-# e.g: SERVERS="192.168.0.1"
-SERVERS=""
-
-# On what interfaces should the DHCP relay (dhrelay) serve DHCP requests?
-INTERFACES=""
-
-# Additional options that are passed to the DHCP relay daemon?
-OPTIONS=""
@@ -1,7 +0,0 @@
-# Defaults for dhcp initscript
-# sourced by /etc/init.d/dhcp-server
-# installed at /etc/default/dhcp-server by the maintainer scripts
-
-# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
-#       Separate multiple interfaces with spaces, e.g. "eth0 eth1".
-INTERFACES=""
@@ -1,39 +0,0 @@
-#!/bin/sh
-
-# In case the interface is used for nfs, skip it.
-nfsroot=0
-interfaces=""
-exec 9<&0 < /proc/mounts
-while read dev mtpt fstype rest; do
-    if test $mtpt = "/" ; then
-        case $fstype in
-            nfs | nfs4)
-                nfsroot=1
-                nfs_addr=`echo $rest | sed -e 's/^.*addr=\([0-9.]*\).*$/\1/'`
-                break
-                ;;
-            *)
-                ;;
-        esac
-    fi
-done
-exec 0<&9 9<&-
-
-if [ $nfsroot -eq 0 ]; then
-    interfaces="$INTERFACES"
-else
-    if [ -x /bin/ip -o -x /sbin/ip ] ; then
-	nfs_iface=`ip route get $nfs_addr | grep dev | sed -e 's/^.*dev \([-a-z0-9.]*\).*$/\1/'`
-    fi
-    for i in $INTERFACES; do
-	if test "x$i" = "x$nfs_iface"; then
-            echo "dhclient skipping nfsroot interface $i"
-	else
-	    interfaces="$interfaces $i"
-	fi
-    done
-fi
-
-if test "x$interfaces" != "x"; then
-    /sbin/dhclient -d -cf /etc/dhcp/dhclient.conf -q -lf /var/lib/dhcp/dhclient.leases $interfaces
-fi
@@ -1,50 +0,0 @@
-# Configuration file for /sbin/dhclient, which is included in Debian's
-#	dhcp3-client package.
-#
-# This is a sample configuration file for dhclient. See dhclient.conf's
-#	man page for more information about the syntax of this file
-#	and a more comprehensive list of the parameters understood by
-#	dhclient.
-#
-# Normally, if the DHCP server provides reasonable information and does
-#	not leave anything out (like the domain name, for example), then
-#	few changes must be made to this file, if any.
-#
-
-#send host-name "andare.fugue.com";
-#send dhcp-client-identifier 1:0:a0:24:ab:fb:9c;
-#send dhcp-lease-time 3600;
-#supersede domain-name "fugue.com home.vix.com";
-#prepend domain-name-servers 127.0.0.1;
-request subnet-mask, broadcast-address, time-offset, routers,
-	domain-name, domain-name-servers, host-name,
-	netbios-name-servers, netbios-scope;
-#require subnet-mask, domain-name-servers;
-#timeout 60;
-#retry 60;
-#reboot 10;
-#select-timeout 5;
-#initial-interval 2;
-#script "/etc/dhcp3/dhclient-script";
-#media "-link0 -link1 -link2", "link0 link1";
-#reject 192.33.137.209;
-
-#alias {
-#  interface "eth0";
-#  fixed-address 192.5.5.213;
-#  option subnet-mask 255.255.255.255;
-#}
-
-#lease {
-#  interface "eth0";
-#  fixed-address 192.33.137.200;
-#  medium "link0 link1";
-#  option host-name "andare.swiftmedia.com";
-#  option subnet-mask 255.255.255.0;
-#  option broadcast-address 192.33.137.255;
-#  option routers 192.33.137.250;
-#  option domain-name-servers 127.0.0.1;
-#  renew 2 2000/1/12 00:00:01;
-#  rebind 2 2000/1/12 00:00:01;
-#  expire 2 2000/1/12 00:00:01;
-#}
@@ -1,13 +0,0 @@
-[Unit]
-Description=Dynamic Host Configuration Protocol (DHCP)
-Wants=network.target
-Before=network.target
-After=systemd-udevd.service
-
-[Service]
-EnvironmentFile=-@SYSCONFDIR@/default/dhcp-client
-ExecStart=@BASE_SBINDIR@/dhclient-systemd-wrapper
-RemainAfterExit=yes
-
-[Install]
-WantedBy=multi-user.target
@@ -1,108 +0,0 @@
-#
-# Sample configuration file for ISC dhcpd for Debian
-#
-# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $
-#
-
-# The ddns-updates-style parameter controls whether or not the server will
-# attempt to do a DNS update when a lease is confirmed. We default to the
-# behavior of the version 2 packages ('none', since DHCP v2 didn't
-# have support for DDNS.)
-ddns-update-style none;
-
-# option definitions common to all supported networks...
-option domain-name "example.org";
-option domain-name-servers ns1.example.org, ns2.example.org;
-
-default-lease-time 600;
-max-lease-time 7200;
-
-# If this DHCP server is the official DHCP server for the local
-# network, the authoritative directive should be uncommented.
-#authoritative;
-
-# Use this to send dhcp log messages to a different log file (you also
-# have to hack syslog.conf to complete the redirection).
-log-facility local7;
-
-# No service will be given on this subnet, but declaring it helps the 
-# DHCP server to understand the network topology.
-
-#subnet 10.152.187.0 netmask 255.255.255.0 {
-#}
-
-# This is a very basic subnet declaration.
-
-#subnet 10.254.239.0 netmask 255.255.255.224 {
-#  range 10.254.239.10 10.254.239.20;
-#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
-#}
-
-# This declaration allows BOOTP clients to get dynamic addresses,
-# which we don't really recommend.
-
-#subnet 10.254.239.32 netmask 255.255.255.224 {
-#  range dynamic-bootp 10.254.239.40 10.254.239.60;
-#  option broadcast-address 10.254.239.31;
-#  option routers rtr-239-32-1.example.org;
-#}
-
-# A slightly different configuration for an internal subnet.
-#subnet 10.5.5.0 netmask 255.255.255.224 {
-#  range 10.5.5.26 10.5.5.30;
-#  option domain-name-servers ns1.internal.example.org;
-#  option domain-name "internal.example.org";
-#  option routers 10.5.5.1;
-#  option broadcast-address 10.5.5.31;
-#  default-lease-time 600;
-#  max-lease-time 7200;
-#}
-
-# Hosts which require special configuration options can be listed in
-# host statements.   If no address is specified, the address will be
-# allocated dynamically (if possible), but the host-specific information
-# will still come from the host declaration.
-
-#host passacaglia {
-#  hardware ethernet 0:0:c0:5d:bd:95;
-#  filename "vmunix.passacaglia";
-#  server-name "toccata.fugue.com";
-#}
-
-# Fixed IP addresses can also be specified for hosts.   These addresses
-# should not also be listed as being available for dynamic assignment.
-# Hosts for which fixed IP addresses have been specified can boot using
-# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
-# be booted with DHCP, unless there is an address range on the subnet
-# to which a BOOTP client is connected which has the dynamic-bootp flag
-# set.
-#host fantasia {
-#  hardware ethernet 08:00:07:26:c0:a5;
-#  fixed-address fantasia.fugue.com;
-#}
-
-# You can declare a class of clients and then do address allocation
-# based on that.   The example below shows a case where all clients
-# in a certain class get addresses on the 10.17.224/24 subnet, and all
-# other clients get addresses on the 10.0.29/24 subnet.
-
-#class "foo" {
-#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
-#}
-
-#shared-network 224-29 {
-#  subnet 10.17.224.0 netmask 255.255.255.0 {
-#    option routers rtr-224.example.org;
-#  }
-#  subnet 10.0.29.0 netmask 255.255.255.0 {
-#    option routers rtr-29.example.org;
-#  }
-#  pool {
-#    allow members of "foo";
-#    range 10.17.224.10 10.17.224.250;
-#  }
-#  pool {
-#    deny members of "foo";
-#    range 10.0.29.10 10.0.29.230;
-#  }
-#}
@@ -1,15 +0,0 @@
-[Unit]
-Description=DHCPv4 Server Daemon
-Documentation=man:dhcpd(8) man:dhcpd.conf(5)
-After=network.target
-After=time-sync.target
-
-[Service]
-PIDFile=@localstatedir@/run/dhcpd.pid
-EnvironmentFile=@SYSCONFDIR@/default/dhcp-server
-EnvironmentFile=-@SYSCONFDIR@/sysconfig/dhcp-server
-ExecStartPre=@base_bindir@/touch @localstatedir@/lib/dhcp/dhcpd.leases
-ExecStart=@SBINDIR@/dhcpd -f -cf @SYSCONFDIR@/dhcp/dhcpd.conf -pf @localstatedir@/run/dhcpd.pid $DHCPDARGS -q $INTERFACES
-
-[Install]
-WantedBy=multi-user.target
@@ -1,15 +0,0 @@
-[Unit]
-Description=DHCPv6 Server Daemon
-Documentation=man:dhcpd(8) man:dhcpd.conf(5)
-After=network.target
-After=time-sync.target
-
-[Service]
-PIDFile=@localstatedir@/run/dhcpd6.pid
-EnvironmentFile=@SYSCONFDIR@/default/dhcp-server
-EnvironmentFile=-@SYSCONFDIR@/sysconfig/dhcpd6
-ExecStartPre=@base_bindir@/touch @localstatedir@/lib/dhcp/dhcpd6.leases
-ExecStart=@SBINDIR@/dhcpd -f -6 -cf @SYSCONFDIR@/dhcp/dhcpd6.conf -pf @localstatedir@/run/dhcpd6.pid $DHCPDARGS -q $INTERFACES
-
-[Install]
-WantedBy=multi-user.target
@@ -1,10 +0,0 @@
-[Unit]
-Description=DHCP Relay Agent Daemon
-After=network.target
-
-[Service]
-EnvironmentFile=@SYSCONFDIR@/default/dhcp-relay
-ExecStart=@SBINDIR@/dhcrelay -d --no-pid -q $SERVERS
-
-[Install]
-WantedBy=multi-user.target
@@ -1,44 +0,0 @@
-#!/bin/sh
-#
-# $Id: dhcp3-relay,v 1.1 2004/04/16 15:41:08 ml Exp $
-#
-
-# It is not safe to start if we don't have a default configuration...
-if [ ! -f /etc/default/dhcp-relay ]; then
-	echo "/etc/default/dhcp-relay does not exist! - Aborting..."
-	echo "create this file to fix the problem."
-	exit 1
-fi
-
-# Read init script configuration (interfaces the daemon should listen on
-# and the DHCP server we should forward requests to.)
-. /etc/default/dhcp-relay
-
-# Build command line for interfaces (will be passed to dhrelay below.)
-IFCMD=""
-if test "$INTERFACES" != ""; then
-	for I in $INTERFACES; do
-		IFCMD=${IFCMD}"-i "${I}" "
-	done
-fi
-
-DHCRELAYPID=/var/run/dhcrelay.pid
-
-case "$1" in
-	start)
-		start-stop-daemon -S -x /usr/sbin/dhcrelay -- -q $OPTIONS $IFCMD $SERVERS
-		;;
-	stop)
-		start-stop-daemon -K -x /usr/sbin/dhcrelay
-		;;
-	restart | force-reload)
-		$0 stop
-		sleep 2
-		$0 start
-		;;
-	*)
-		echo "Usage: /etc/init.d/dhcp-relay {start|stop|restart|force-reload}"
-		exit 1 
-esac
-
-exit 0
@@ -1,44 +0,0 @@
-#!/bin/sh
-#
-# $Id: dhcp3-server.init.d,v 1.4 2003/07/13 19:12:41 mdz Exp $
-#
-
-test -f /usr/sbin/dhcpd || exit 0
-
-# It is not safe to start if we don't have a default configuration...
-if [ ! -f /etc/default/dhcp-server ]; then
-	echo "/etc/default/dhcp-server does not exist! - Aborting..."
-	exit 0
-fi
-
-# Read init script configuration (so far only interfaces the daemon
-# should listen on.)
-. /etc/default/dhcp-server
-
-case "$1" in
-	start)
-		echo -n "Starting DHCP server: "
-		test -d /var/lib/dhcp/ || mkdir -p /var/lib/dhcp/
-		test -f /var/lib/dhcp/dhcpd.leases || touch /var/lib/dhcp/dhcpd.leases	
-		start-stop-daemon -S -x /usr/sbin/dhcpd -- -q $INTERFACES -user dhcp -group dhcp
-		echo "."
-		;;
-	stop)
-		echo -n "Stopping DHCP server: dhcpd3"
-		start-stop-daemon -K -x /usr/sbin/dhcpd
-		echo "."
-		;;
-	restart | force-reload)
-		$0 stop
-		sleep 2
-		$0 start
-		if [ "$?" != "0" ]; then
-			exit 1
-		fi
-		;;
-	*)
-		echo "Usage: /etc/init.d/dhcp-server {start|stop|restart|force-reload}"
-		exit 1 
-esac
-
-exit 0
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: MIT
-#
-# Copyright (c) 2020 Arm Limited
-#
-
-SUMMARY = "Docker runtime minimal requirements"
-DESCRIPTION = "The minimal set of packages required for running Docker"
-
-inherit packagegroup
-
-RDEPENDS_${PN} = "\
-    docker-ce \
-    docker-ce-contrib \
-    kernel-module-xt-nat \
-    kernel-module-xt-masquerade \
-    kernel-module-xt-addrtype \
-    kernel-module-xt-conntrack \
-    kernel-module-xt-ipvs \
-   "
@@ -39,9 +39,9 @@ ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUESTS ??= ""
 IMAGE_INSTALL += " \
    packagegroup-core-boot \
    packagegroup-core-ssh-openssh \
-    qemu-system-i386 \
+    qemu-xen \
    xenguest-manager \
-    xenguest-network \
+    xenguest-network-bridge \
    "

 # Build xen binary
@@ -6,7 +6,13 @@ OVERRIDES_append = "${@bb.utils.contains('DISTRO_FEATURES', 'xen', ':xen', '', d
 QEMU_TARGETS_xen = "i386"

 PACKAGECONFIG[noaudio] = "--audio-drv-list='',,"
-PACKAGECONFIG_append_xen = " noaudio"
-PACKAGECONFIG_remove_xen = "fdt sdl kvm"
+PACKAGECONFIG_append_xen = " virtfs noaudio"
+PACKAGECONFIG_remove_xen = "sdl"

-require ${@bb.utils.contains('DISTRO_FEATURES', 'xen', 'recipes-devtools/qemu/${BPN}-package-split.inc', '', d)}
+# Reduce the qemu package size by splitting it into
+# qemu and qemu-xen packages
+PACKAGES_prepend_xen := "${PN}-xen"
+RDEPENDS_${PN}_xen += "${PN}-xen"
+FILES_${PN}-xen_xen = "${bindir}/qemu-system-i386"
+RDEPENDS_${PN}-xen_xen += "xen-tools-libxenstore xen-tools-libxenctrl \
+    xen-tools-libxenguest"
@@ -38,10 +38,10 @@ do_deploy() {
        die "xen.dtsi.in does not exist"
    fi
    cat ${WORKDIR}/xen.dtsi.in \
-        | sed -e "s?###XEN_DOM0_BOOTARGS###?${XEN_DEVICETREE_DOM0_BOOTARGS}?" \
-        | sed -e "s?###XEN_XEN_BOOTARGS###?${XEN_DEVICETREE_XEN_BOOTARGS}?" \
-        | sed -e "s?###XEN_DOM0_ADDR###?${XEN_DEVICETREE_DOM0_ADDR}?" \
-        | sed -e "s?###XEN_DOM0_SIZE###?${XEN_DEVICETREE_DOM0_SIZE}?" \
+        | sed -e "s,###XEN_DOM0_BOOTARGS###,${XEN_DEVICETREE_DOM0_BOOTARGS}," \
+        | sed -e "s,###XEN_XEN_BOOTARGS###,${XEN_DEVICETREE_XEN_BOOTARGS}," \
+        | sed -e "s,###XEN_DOM0_ADDR###,${XEN_DEVICETREE_DOM0_ADDR}," \
+        | sed -e "s,###XEN_DOM0_SIZE###,${XEN_DEVICETREE_DOM0_SIZE}," \
        > ${WORKDIR}/xen.dtsi

    # Generate final dtbs
@@ -1,40 +0,0 @@
-From 3b418b33265402aab0cb1bf2b745a25724bae2d8 Mon Sep 17 00:00:00 2001
-Message-Id: <3b418b33265402aab0cb1bf2b745a25724bae2d8.1602684880.git.diego.sueiro@arm.com>
-From: Bertrand Marquis <bertrand.marquis@arm.com>
-Date: Tue, 18 Aug 2020 14:47:38 +0100
-Subject: [PATCH] arm: Add Neoverse N1 processor identification
-
-Add MIDR and CPU part numbers for Neoverse N1
-
-Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
-Acked-by: Julien Grall <jgrall@amazon.com>
-
-Upstream-Status: Backport
-Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
---
- xen/include/asm-arm/processor.h | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/xen/include/asm-arm/processor.h b/xen/include/asm-arm/processor.h
-index aa642e3..3ca67f8 100644
--- a/xen/include/asm-arm/processor.h
-+++ b/xen/include/asm-arm/processor.h
-@@ -58,6 +58,7 @@
- #define ARM_CPU_PART_CORTEX_A73     0xD09
- #define ARM_CPU_PART_CORTEX_A75     0xD0A
- #define ARM_CPU_PART_CORTEX_A76     0xD0B
-+#define ARM_CPU_PART_NEOVERSE_N1    0xD0C
- 
- #define MIDR_CORTEX_A12 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A12)
- #define MIDR_CORTEX_A17 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A17)
-@@ -68,6 +69,7 @@
- #define MIDR_CORTEX_A73 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A73)
- #define MIDR_CORTEX_A75 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A75)
- #define MIDR_CORTEX_A76 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A76)
-+#define MIDR_NEOVERSE_N1 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N1)
- 
- /* MPIDR Multiprocessor Affinity Register */
- #define _MPIDR_UP           (30)
-- 
-2.7.4
-
@@ -1,42 +0,0 @@
-From 858c0be8c2fa4125a0fa0acaa03ae730e5c7cb3c Mon Sep 17 00:00:00 2001
-Message-Id: <858c0be8c2fa4125a0fa0acaa03ae730e5c7cb3c.1602684183.git.diego.sueiro@arm.com>
-From: Bertrand Marquis <bertrand.marquis@arm.com>
-Date: Tue, 18 Aug 2020 14:47:39 +0100
-Subject: [PATCH] xen/arm: Enable CPU Erratum 1165522 for Neoverse
-
-Enable CPU erratum of Speculative AT on the Neoverse N1 processor
-versions r0p0 to r2p0.
-Also Fix Cortex A76 Erratum string which had a wrong errata number.
-
-Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
-Acked-by: Julien Grall <jgrall@amazon.com>
-
-Upstream-Status: Backport
-Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
---
- xen/arch/arm/cpuerrata.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
-diff --git a/xen/arch/arm/cpuerrata.c b/xen/arch/arm/cpuerrata.c
-index 0248893..6c09017 100644
--- a/xen/arch/arm/cpuerrata.c
-+++ b/xen/arch/arm/cpuerrata.c
-@@ -477,8 +477,14 @@ static const struct arm_cpu_capabilities arm_errata[] = {
-     },
- #endif
-     {
-+        /* Neoverse r0p0 - r2p0 */
-+        .desc = "ARM erratum 1165522",
-+        .capability = ARM64_WORKAROUND_AT_SPECULATE,
-+        MIDR_RANGE(MIDR_NEOVERSE_N1, 0, 2 << MIDR_VARIANT_SHIFT),
-+    },
-+    {
-         /* Cortex-A76 r0p0 - r2p0 */
-        .desc = "ARM erratum 116522",
-+        .desc = "ARM erratum 1165522",
-         .capability = ARM64_WORKAROUND_AT_SPECULATE,
-         MIDR_RANGE(MIDR_CORTEX_A76, 0, 2 << MIDR_VARIANT_SHIFT),
-     },
-- 
-2.7.4
-
@@ -1,35 +0,0 @@
-From 1814a626fb5811184eda64fe22f0055df4600211 Mon Sep 17 00:00:00 2001
-Message-Id: <1814a626fb5811184eda64fe22f0055df4600211.1602684203.git.diego.sueiro@arm.com>
-From: Julien Grall <jgrall@amazon.com>
-Date: Tue, 25 Aug 2020 18:38:10 +0100
-Subject: [PATCH] xen/arm: Update silicon-errata.txt with the Neovers AT
- erratum
-
-Commit 858c0be8c2fa "xen/arm: Enable CPU Erratum 1165522 for Neoverse"
-added a new erratum but forgot to update silicon-errata.txt.
-
-Update the file accordingly to keep track of errata workaround in Xen.
-
-Signed-off-by: Julien Grall <jgrall@amazon.com>
-Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
-Acked-by: Stefano Stabellini <sstabellini@kernel.org>
-
-Upstream-Status: Backport
-Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
---
- docs/misc/arm/silicon-errata.txt | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/docs/misc/arm/silicon-errata.txt b/docs/misc/arm/silicon-errata.txt
-index 11e5a9d..e15d092 100644
--- a/docs/misc/arm/silicon-errata.txt
-+++ b/docs/misc/arm/silicon-errata.txt
-@@ -51,4 +51,5 @@ stable hypervisors.
- | ARM            | Cortex-A57      | #1319537        | N/A                     |
- | ARM            | Cortex-A72      | #1319367        | N/A                     |
- | ARM            | Cortex-A76      | #1165522        | N/A                     |
-+| ARM            | Neoverse-N1     | #1165522        | N/A
- | ARM            | MMU-500         | #842869         | N/A                     |
-- 
-2.7.4
-
@@ -1,51 +0,0 @@
-From 968bb86d04913f52d7678a842474f2a674a8b23e Mon Sep 17 00:00:00 2001
-Message-Id: <968bb86d04913f52d7678a842474f2a674a8b23e.1602683678.git.diego.sueiro@arm.com>
-From: Wei Chen <wei.chen@arm.com>
-Date: Fri, 28 Aug 2020 02:34:03 +0000
-Subject: [PATCH] xen/arm: Missing N1/A76/A75 FP registers in vCPU context
- switch
-
-Xen has cpu_has_fp/cpu_has_simd to detect whether the CPU supports
-FP/SIMD or not. But currently, these two MACROs only consider value 0
-of ID_AA64PFR0_EL1.FP/SIMD as FP/SIMD features enabled. But for CPUs
-that support FP/SIMD and half-precision floating-point arithmetic, the
-ID_AA64PFR0_EL1.FP/SIMD are 1 (see Arm ARM DDI0487F.b, D13.2.64).
-For these CPUs, xen will treat them as no FP/SIMD support, the
-vfp_save/restore_state will not take effect.
-
-From the TRM documents of Cortex-A75/A76/N1, we know these CPUs support
-basic Advanced SIMD/FP and half-precision floating-point arithmetic. In
-this case, on N1/A76/A75 platforms, Xen will always miss the floating
-pointer registers save/restore. If different vCPUs are running on the
-same pCPU, the floating pointer registers will be corrupted randomly.
-
-This patch fixes Xen on these new cores.
-
-Signed-off-by: Wei Chen <wei.chen@arm.com>
-Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
-Reviewed-by: Julien Grall <jgrall@amazon.com>
-
-Upstream-Status: Backport
-Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
---
- xen/include/asm-arm/cpufeature.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/xen/include/asm-arm/cpufeature.h b/xen/include/asm-arm/cpufeature.h
-index 674beb0..10878ea 100644
--- a/xen/include/asm-arm/cpufeature.h
-+++ b/xen/include/asm-arm/cpufeature.h
-@@ -13,8 +13,8 @@
- #define cpu_has_el2_64    (boot_cpu_feature64(el2) >= 1)
- #define cpu_has_el3_32    (boot_cpu_feature64(el3) == 2)
- #define cpu_has_el3_64    (boot_cpu_feature64(el3) >= 1)
-#define cpu_has_fp        (boot_cpu_feature64(fp) == 0)
-#define cpu_has_simd      (boot_cpu_feature64(simd) == 0)
-+#define cpu_has_fp        (boot_cpu_feature64(fp) < 8)
-+#define cpu_has_simd      (boot_cpu_feature64(simd) < 8)
- #define cpu_has_gicv3     (boot_cpu_feature64(gic) == 1)
- #endif
- 
-- 
-2.7.4
-
@@ -1,51 +0,0 @@
-From f4c1a541fa351e4f613471bbf397931f9e1ddd27 Mon Sep 17 00:00:00 2001
-Message-Id: <f4c1a541fa351e4f613471bbf397931f9e1ddd27.1602683707.git.diego.sueiro@arm.com>
-From: Wei Chen <wei.chen@arm.com>
-Date: Fri, 28 Aug 2020 02:34:04 +0000
-Subject: [PATCH] xen/arm: Throw messages for unknown FP/SIMD implement ID
-
-Arm ID_AA64PFR0_EL1 register provides two fields to describe CPU
-FP/SIMD implementations. Currently, we exactly know the meaning of
-0x0, 0x1 and 0xf of these fields. Xen treats value < 8 as FP/SIMD
-features presented. If there is a value 0x2 bumped in the future,
-Xen behaviors for value <= 0x1 can also take effect. But what Xen
-done for value <= 0x1 may not always cover new value 0x2 required.
-We throw these messages to break the silence when Xen detected
-unknown FP/SIMD IDs to notice user to check.
-
-Signed-off-by: Wei Chen <wei.chen@arm.com>
-Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
-Acked-by: Julien Grall <jgrall@amazon.com>
-
-Upstream-Status: Backport
-Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
---
- xen/arch/arm/setup.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
-diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
-index 7968cee..f16b33f 100644
--- a/xen/arch/arm/setup.c
-+++ b/xen/arch/arm/setup.c
-@@ -133,6 +133,18 @@ static void __init processor_id(void)
-            cpu_has_simd ? " AdvancedSIMD" : "",
-            cpu_has_gicv3 ? " GICv3-SysReg" : "");
- 
-+    /* Warn user if we find unknown floating-point features */
-+    if ( cpu_has_fp && (boot_cpu_feature64(fp) >= 2) )
-+        printk(XENLOG_WARNING "WARNING: Unknown Floating-point ID:%d, "
-+               "this may result in corruption on the platform\n",
-+               boot_cpu_feature64(fp));
-+
-+    /* Warn user if we find unknown AdvancedSIMD features */
-+    if ( cpu_has_simd && (boot_cpu_feature64(simd) >= 2) )
-+        printk(XENLOG_WARNING "WARNING: Unknown AdvancedSIMD ID:%d, "
-+               "this may result in corruption on the platform\n",
-+               boot_cpu_feature64(simd));
-+
-     printk("  Debug Features: %016"PRIx64" %016"PRIx64"\n",
-            boot_cpu_data.dbg64.bits[0], boot_cpu_data.dbg64.bits[1]);
-     printk("  Auxiliary Features: %016"PRIx64" %016"PRIx64"\n",
-- 
-2.7.4
-
@@ -1,18 +0,0 @@
-Upstream-Status: Pending
-Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
-
-Setting the hostname is failing because the "$XENBUS_PATH/domain"
-doesn't exist anymore. To fix this we set it to dom$domid
-
-Index: git/tools/hotplug/Linux/vif-nat
-===================================================================
--- git.orig/tools/hotplug/Linux/vif-nat
-+++ git/tools/hotplug/Linux/vif-nat
-@@ -86,6 +86,7 @@ router_ip=$(routing_ip "$ip")
- vif_ip=`echo ${ip} | awk -F/ '{print $1}'`
- 
- hostname=$(xenstore_read "$XENBUS_PATH/domain" | tr -- '_.:/+' '-----')
-+[ -z "${hostname}" ] && hostname=dom$domid
- if [ "$vifid" != "1" ]
- then
-   hostname="$hostname-$vifid"
@@ -1,45 +0,0 @@
-Upstream-Status: Pending
-Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
-
-Copy temp files used to add/remove dhcpd configurations to avoid
-replacing potential symlinks.
-
-Index: git/tools/hotplug/Linux/vif-nat
-===================================================================
--- git.orig/tools/hotplug/Linux/vif-nat
-+++ git/tools/hotplug/Linux/vif-nat
-@@ -99,7 +100,8 @@ dhcparg_remove_entry()
-   then
-     rm "$tmpfile"
-   else
-    mv "$tmpfile" "$dhcpd_arg_file"
-+    cp "$tmpfile" "$dhcpd_arg_file"
-+    rm "$tmpfile"
-   fi
- }
- 
-@@ -109,11 +111,11 @@ dhcparg_add_entry()
-   local tmpfile=$(mktemp)
-   # handle Red Hat, SUSE, and Debian styles, with or without quotes
-   sed -e 's/^DHCPDARGS="*\([^"]*\)"*/DHCPDARGS="\1'"${dev} "'"/' \
-     "$dhcpd_arg_file" >"$tmpfile" && mv "$tmpfile" "$dhcpd_arg_file"
-+     "$dhcpd_arg_file" >"$tmpfile" && cp "$tmpfile" "$dhcpd_arg_file"
-   sed -e 's/^DHCPD_INTERFACE="*\([^"]*\)"*/DHCPD_INTERFACE="\1'"${dev} "'"/' \
-     "$dhcpd_arg_file" >"$tmpfile" && mv "$tmpfile" "$dhcpd_arg_file"
-+     "$dhcpd_arg_file" >"$tmpfile" && cp "$tmpfile" "$dhcpd_arg_file"
-   sed -e 's/^INTERFACES="*\([^"]*\)"*/INTERFACES="\1'"${dev} "'"/' \
-     "$dhcpd_arg_file" >"$tmpfile" && mv "$tmpfile" "$dhcpd_arg_file"
-+     "$dhcpd_arg_file" >"$tmpfile" && cp "$tmpfile" "$dhcpd_arg_file"
-   rm -f "$tmpfile"
- }
- 
-@@ -125,7 +127,8 @@ dhcp_remove_entry()
-   then
-     rm "$tmpfile"
-   else
-    mv "$tmpfile" "$dhcpd_conf_file"
-+    cp "$tmpfile" "$dhcpd_conf_file"
-+    rm "$tmpfile"
-   fi
-   dhcparg_remove_entry
- }
@@ -1,10 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-
-SRC_URI += "file://0001-vif-nat-fix-hostname.patch \
-            file://0002-vif-nat-fix-symlink-removal.patch \
-           "
-
-PACKAGECONFIG_remove = "\
-    ${@bb.utils.contains('DISTRO_FEATURES', \
-                         'arm-autonomy-host', \
-                         'sdl', '', d)}"
@@ -1,9 +1,14 @@
+#
+# Define early console based on board parameters
+#
+
+XEN_CONFIG_EARLY_PRINTK ??= "disable"
+
+EXTRA_OEMAKE += "${@bb.utils.contains('XEN_CONFIG_EARLY_PRINTK', 'disable', \
+    '', ' CONFIG_DEBUG=y CONFIG_EARLY_PRINTK=${XEN_CONFIG_EARLY_PRINTK}',d)}"
+
 # Make Xen machine specific
 # This ensures that sstate is properly handled and that each machine can have
 # its own configuration
 PACKAGE_ARCH = "${MACHINE_ARCH}"

-PACKAGECONFIG_remove = "\
-    ${@bb.utils.contains('DISTRO_FEATURES', \
-                         'arm-autonomy-host', \
-                         'sdl', '', d)}"
@@ -1,9 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-4.14:"
-
-SRC_URI += " \
-    file://0001-arm-Add-Neoverse-N1-processor-identification.patch \
-    file://0002-xen-arm-Enable-CPU-Erratum-1165522-for-Neoverse.patch \
-    file://0003-xen-arm-Update-silicon-errata.txt-with-the-Neovers-A.patch \
-    file://0004-xen-arm-Missing-N1-A76-A75-FP-registers-in-vCPU-cont.patch \
-    file://0005-xen-arm-Throw-messages-for-unknown-FP-SIMD-implement.patch \
-    "
@@ -1,146 +0,0 @@
-#============================================================================
-# ${XEN_SCRIPT_DIR}/vif-post.d/00-vif-xenguest.hook
-#
-# Script for performing local configuration of a vif.
-# This script will be sourced by, e.g., vif-bridge after the hotplugging
-# system calls vif-bridge. The script is here and not simply executed as
-# a udev rule because this allows simple access to several environment
-# variables set by the calling vif-* script.
-#
-# Environment vars:
-# command     (add|remove|online|offline)
-# dev         vif interface name (required).
-# main_ip     IP address of Dom0
-# ip          list of IP networks for the vif, space-separated
-# XENBUS_PATH path to this device's details in the XenStore (required).
-#============================================================================
-
-domid=$(xenstore_read "${XENBUS_PATH}/frontend-id")
-guestname=$(xenstore_read "/local/domain/${domid}/name")
-bridge=$(xenstore_read "${XENBUS_PATH}/bridge")
-
-if [ ! -f /etc/xenguest/guests/${guestname}/params.cfg ]; then
-    log debug "No /etc/xenguest/guests/${guestname}/params.cfg. Exiting."
-    return
-fi
-
-# Source the params file to get the choosen XENGUEST_NETWORK_TYPE
-. /etc/xenguest/guests/${guestname}/params.cfg
-
-# We need to get the xenguest subnet prefix to set the subnet and
-# the fixed ip to assing to the guest.
-get_subnet_prefix() {
-    # ${vif_ip} is set in the vif-nat script
-    echo ${vif_ip} | awk -F. '{print $1"."$2"."$3}'
-}
-
-subnetprefix=$(get_subnet_prefix)
-
-dhcpd_remove_conf_entry()
-{
-    local tmpfile=$(mktemp)
-
-    # Remove the the xenguest dhcpd config file inclusion in the dhcpd
-    # main config
-    grep -v "include \"${XENGUEST_DHCPD_CONF_FILE}\";" \
-            "${dhcpd_conf_file}" >"${tmpfile}"
-    if ! diff "${tmpfile}" "${dhcpd_conf_file}" >/dev/null
-    then
-        cp "${tmpfile}" "${dhcpd_conf_file}"
-    fi
-    rm ${tmpfile}
-
-    # Remove the generated the xenguest dhcpd file
-    rm ${XENGUEST_DHCPD_CONF_FILE}
-}
-
-# This function removes the dhcpd options added by the vif-nat script and
-# adds the user provided options under the ${XENGUEST_DHCPD_HOST_OPTIONS}
-# variable set in "/etc/xenguest/guests/${guestname}/files/dhcpd-params.cfg"
-# file.
-dhcpd_add_conf_entries()
-{
-    # We need to remove the previous added entry from vif-nat script
-    dhcp_remove_entry
-
-    # Include the xenguest dhcpd config file in the dhcpd main config
-    echo >>"${dhcpd_conf_file}" "include \"${XENGUEST_DHCPD_CONF_FILE}\";"
-
-    # Generate the xenguest dhcpd file
-    echo -e "$(eval "echo -e \"$(cat ${XENGUEST_DHCPD_PARAMS_FILE})\"")" \
-            >> "${XENGUEST_DHCPD_CONF_FILE}"
-
-    # Re-add the dhcpargs entries removed by dhcp_remove_entry call
-    dhcparg_add_entry
-}
-
-dhcpd_online(){
-    log debug "dhcpd_online"
-    claim_lock "vif-nat-dhcp"
-    dhcpd_add_conf_entries
-    release_lock "vif-nat-dhcp"
-   "$dhcpd_init_file" restart || true
-}
-
-dhcpd_offline(){
-    log debug "dhcpd_offline"
-    claim_lock "vif-nat-dhcp"
-    dhcpd_remove_conf_entry
-    release_lock "vif-nat-dhcp"
-    "$dhcpd_init_file" restart || true # We need to ignore failure because
-                                       # ISC dhcpd 3 borks if there is nothing
-                                       # for it to do, which is the case if
-                                       # the outgoing interface is not
-                                       # configured to offer leases and there
-                                       # are no vifs.
-}
-
-call_extra_hooks() {
-    for f in /etc/xenguest/guests/${guestname}/files/*.hook; do
-        if [ -x "$f" ]; then
-            log info "Executing $f"
-            . "$f"
-            if [ $? -ne 0 ]; then
-                log err "$f failed."
-            fi
-        else
-            log info "$f is not executable. Skipping."
-        fi
-    done
-}
-
-case "${XENGUEST_NETWORK_TYPE}" in
-    nat)
-        XENGUEST_DHCPD_PARAMS_FILE=${XENGUEST_DHCPD_PARAMS_FILE:-"/etc/xenguest/guests/${guestname}/files/dhcpd-params.cfg"}
-        if [ ! -f ${XENGUEST_DHCPD_PARAMS_FILE} ]; then
-            log debug "No ${XENGUEST_DHCPD_PARAMS_FILE} file. Aborting"
-            return
-        fi
-
-        XENGUEST_DHCPD_CONF_FILE="/etc/dhcp/dhcpd.dom$domid.conf"
-
-        case "$command" in
-            online)
-                dhcpd_online
-
-                # Enable ip forwarding and NAT for the ${bridge} interface
-                sysctl -w net.ipv4.ip_forward=1
-                iptables_w -t nat -A POSTROUTING -o ${bridge} -j MASQUERADE -m comment --comment "dom${domid}"
-                ;;
-            offline)
-                dhcpd_offline
-
-                # Remove the NAT iptables rules created for the dom${domid}
-                guest_ipt_rule=$(iptables_w -t nat -vL POSTROUTING -n --line-number | grep -w dom${domid} | awk '{print $1}' | tac)
-                for rule in ${guest_ipt_rule}; do iptables_w -t nat --delete POSTROUTING ${rule}; done
-
-                # If there is no more NAT iptables rules we disable ip forwarding
-                ipt_nat_rules=$(iptables_w -t nat -vL POSTROUTING -n --line-number | grep MASQUERADE | awk '{print $1}')
-                [ -z "${ipt_nat_rules##*[!0-9]*}" ] && sysctl -w net.ipv4.ip_forward=0
-               ;;
-        esac
-
-        # We might have extra configs to be applied (e.g.: NAT port forward).
-        call_extra_hooks
-        ;;
-esac
@@ -1,48 +0,0 @@
-#============================================================================
-# /etc/xenguest/guests/${guestname}/files/00-xenguest-nat-port-forward.hook
-#
-# Script for performing local configuration related to NAT port forwarding of
-# a vif.
-# This script will be sourced by
-# /etc/xen/scripts/vif-post.d/00-vif-xenguest.hook when
-# XENGUEST_IMAGE_NETWORK_TYPE="nat".
-# The ${bridge} and ${domid} are set in the 00-vif-xenguest.hook context,
-# and ${vip_if} in the vif-nat script context.
-#
-# Environment vars:
-# command     (add|remove|online|offline)
-# dev         vif interface name (required).
-# main_ip     IP address of Dom0
-# ip          list of IP networks for the vif, space-separated
-# XENBUS_PATH path to this device's details in the XenStore (required).
-#============================================================================
-
-host_port="###HOST_PORT###"
-guest_port="###GUEST_PORT###"
-
-port_num_check() {
-    if [ ${host_port} -gt 65535 -o ${guest_port} -gt 65535 ]; then
-        log error "host_port=${host_port} or guest_port=${guest_port} greater than 65535."
-        return 1
-    fi
-    return 0
-}
-
-case "${command}" in
-    online)
-        port_num_check
-        if [ $? -eq 0 ]; then
-            iptables_w -t nat -A PREROUTING -i ${bridge} -p tcp \
-                       --dport ${host_port} -j DNAT \
-                       --to-destination ${vif_ip}:${guest_port} \
-                       -m comment --comment "dom${domid}"
-        fi
-        ;;
-    offline)
-        # Remove the NAT iptables rules created for the dom${domid}
-        guest_ipt_rule=$(iptables_w -t nat -vL PREROUTING -n --line-number \
-                         | grep -w dom${domid} | awk '{print $1}' | tac)
-        for rule in ${guest_ipt_rule}; \
-            do iptables_w -t nat --delete PREROUTING ${rule}; done
-        ;;
-esac
@@ -1,30 +0,0 @@
-# This file holds the guest dhcpd options running on Dom0.
-# The "/etc/xen/scripts/vif-post.d/00-vif-xenguest.hook" called in the end of
-# the vif-nat script will use this file to generate the final dhcpd
-# configuration.
-
-# This file is added in the xenguest image and installed in dom0 under
-# /etc/xenguest/guests/${guestname}/files/dhcpd-params.cfg when the guest
-# image is created.
-# Any customizations to it should be performed by replacing it via a bbappend.
-
-# The \${hostname}, \${mac}, \${vif_ip} and \${router_ip} variables are set in
-# the vif-nat script context. The \${subnetprefix} variable is set in the
-# 00-vif-xenguest.hook script context.
-
-# The "subnet" configuration node is mandatory in order to have the dhcpd
-# properly running.
-
-host ${hostname} {
-    hardware ethernet ${mac};
-    fixed-address ${vif_ip};
-    option routers ${router_ip};
-    option subnet-mask 255.255.255.0;
-    option broadcast-address ${subnetprefix}.255;
-    option domain-name-servers 8.8.8.8;
-    option host-name \"${hostname}\";
-    option domain-name \"example.com\";
-}
-
-subnet ${subnetprefix}.0 netmask 255.255.255.0 {
-}
@@ -9,24 +9,7 @@ BRIDGE_NAME="###BRIDGE_NAME###"
 # get guest parameters
 . ./params.cfg

-case "${XENGUEST_NETWORK_TYPE:-}" in
-    nat)
-        # Create the symlinks for the files that vif-nat script expects
-        if [ ! -f /etc/dhcpd.conf ]; then
-            ln -s dhcp/dhcpd.conf /etc/dhcpd.conf
-        fi
-        if [ ! -f /etc/init.d/dhcp3-server ]; then
-            ln -s dhcp-server /etc/init.d/dhcp3-server
-        fi
-        if [ ! -f /etc/default/dhcp3-server ]; then
-            ln -s dhcp-server /etc/default/dhcp3-server
-        fi
-        echo "vif = ['script=vif-nat']" >> ${guestname}.cfg
-        ;;
-    bridge)
-        echo "vif = ['script=vif-bridge,bridge=${BRIDGE_NAME}']" >> ${guestname}.cfg
-        ;;
-    *)
-        echo "${@}: XENGUEST_NETWORK_TYPE=$XENGUEST_NETWORK_TYPE invalid"
-        ;;
-esac
+if [ "${NETWORK_BRIDGE:-}" = "1" ]; then
+    echo "vif = ['${BRIDGE_NAME}']" >> ${guestname}.cfg
+fi
+
@@ -82,9 +82,6 @@ Xen configuration for the guest
 --xen-device-tree=      disable device tree parameter in xen configuration
 --xen-device-tree=FILE  set guest device tree in xen configuration and add
                         file to xen files
--xen-ramdisk=          disable ramdisk parameter in xen configuration
--xen-ramdisk=FILE      set guest ramdisk in xen configuration and add
-                         file to xen files
 --xen-disk=             disable disk parameter in xen configuration
 --xen-disk=DEV          set guest disk to device DEV (phy:DEV,xvda,w is set)
 --xen-append=FILE       append FILE content to xen configuration
@@ -671,20 +668,6 @@ for arg in "${@}"; do
                install -m 644 ${optarg} ${IMAGE_TMPDIR}/files/guest.dtb
            fi
            ;;
-        --xen-ramdisk=*)
-            if [ -z "${optarg}" ]; then
-                xen_config_disable_param "ramdisk"
-                rm -f ${IMAGE_TMPDIR}/files/ramdisk.img
-            else
-                if [ ! -f ${optarg} ]; then
-                    echo "Error: invalid ramdisk file ${optarg}"
-                    exit 1
-                fi
-                xen_config_set_string "ramdisk" "files/ramdisk.img"
-                mkdir -p ${IMAGE_TMPDIR}/files
-                install -m 644 ${optarg} ${IMAGE_TMPDIR}/files/ramdisk.img
-            fi
-            ;;
        --xen-disk=*)
            if [ -z "${optarg}" ]; then
                xen_config_disable_param "disk"
@@ -23,16 +23,6 @@ LICENSE = "MIT"

 LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"

-# When XENGUEST_IMAGE_NETWORK_TYPE="nat", the "00-xenguest-nat-port-forward.hook"
-# is called by "/etc/xen/scripts/vif-post.d/00-vif-xenguest.hook" to apply NAT
-# port forwarding. Both dom0 and domU ports can be be set by changing the
-# XENGUEST_IMAGE_HOST_PORT and XENGUEST_IMAGE_GUEST_PORT variables in local.conf
-# or xenguest-base-image.bbappend. The XENGUEST_IMAGE_NAT_PORT_FORWARD_SCRIPT
-# can also be replaced in a xenguest-base-image.bbappend
-XENGUEST_IMAGE_HOST_PORT ?= "\$( expr 1000 + \${domid} )"
-XENGUEST_IMAGE_GUEST_PORT ?= "22"
-XENGUEST_IMAGE_NAT_PORT_FORWARD_SCRIPT ?= "00-xenguest-nat-port-forward.hook"
-
 #
 # The following variables can contain SRC_URI compatible entries to add
 # files to the xenguest image.
@@ -45,17 +35,7 @@ XENGUEST_IMAGE_NAT_PORT_FORWARD_SCRIPT ?= "00-xenguest-nat-port-forward.hook"
 XENGUEST_IMAGE_SRC_URI_DISK_FILES ??= ""

 # Add xen files
-# Any extrafiles files to be added to XENGUEST_IMAGE_SRC_URI_XEN_FILES should
-# be performed via XENGUEST_IMAGE_SRC_URI_XEN_FILES_append.
-# The dhcpd-params.cfg holds the dhcpd configuration for Dom0. And it is used
-# when XENGUEST_IMAGE_NETWORK_TYPE="nat". Any customizations to it should be
-# performed by replacing it via a xenguest-network.bbappend.
-# The XENGUEST_IMAGE_NAT_PORT_FORWARD_SCRIPT file is only added if the
-# variable is set.
-XENGUEST_IMAGE_SRC_URI_XEN_FILES = "file://dhcpd-params.cfg \
-    ${@ "file://" + d.getVar('XENGUEST_IMAGE_NAT_PORT_FORWARD_SCRIPT') \
-      if d.getVar('XENGUEST_IMAGE_NAT_PORT_FORWARD_SCRIPT') else "" } \
-    "
+XENGUEST_IMAGE_SRC_URI_XEN_FILES ??= ""

 # Add xen configuration elements
 XENGUEST_IMAGE_SRC_URI_XEN_CONFIG ??= ""
@@ -97,8 +77,8 @@ python __anonymous() {

 # Make sure we are removing old files before redoing a fetch
 do_fetch[cleandirs] += "${WORKDIR}/extend"
-do_fetch[vardeps] += "XENGUEST_IMAGE_HOST_PORT XENGUEST_IMAGE_GUEST_PORT"

+do_configure[noexec] = "1"
 do_compile[noexec] = "1"
 do_install[noexec] = "1"

@@ -122,15 +102,6 @@ add_extend_files() {
    fi
 }

-do_configure() {
-    if [ -f ${WORKDIR}/extend/files/${XENGUEST_IMAGE_NAT_PORT_FORWARD_SCRIPT} ]; then
-        sed -i "s,###HOST_PORT###,${XENGUEST_IMAGE_HOST_PORT}," \
-               ${WORKDIR}/extend/files/${XENGUEST_IMAGE_NAT_PORT_FORWARD_SCRIPT}
-        sed -i "s,###GUEST_PORT###,${XENGUEST_IMAGE_GUEST_PORT}," \
-               ${WORKDIR}/extend/files/${XENGUEST_IMAGE_NAT_PORT_FORWARD_SCRIPT}
-    fi
-}
-
 do_deploy() {
    # Create a new image
    xenguest_image_create
@@ -1,5 +1,5 @@
 # Recipe to handle xenguest network configuration
-DESCRIPTION = "Xenguest Network"
+DESCRIPTION = "XenGuest Network Bridge"

 LICENSE = "MIT"
 LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
@@ -20,7 +20,6 @@ SRC_URI = " \
    file://xenguest-network-bridge.in \
    file://xenguest-network-bridge-dhcp.cfg.in \
    file://network-bridge.sh.in \
-    file://00-vif-xenguest.hook \
    "

 # Bridge configurator needs to run before S01networking init script
@@ -50,21 +49,8 @@ do_install() {
    install -d -m 755 ${D}${sysconfdir}/xenguest/init.pre
    install -m 755 ${WORKDIR}/network-bridge.sh \
        ${D}${sysconfdir}/xenguest/init.pre/.
-
-    install -d ${D}${sysconfdir}/xen/scripts/vif-post.d
-    install -m 755 ${WORKDIR}/00-vif-xenguest.hook \
-        ${D}${sysconfdir}/xen/scripts/vif-post.d/.
 }

-RDEPENDS_${PN} += "bridge-utils \
-                   iptables \
-                   dhcp-server \
-                   kernel-module-xt-tcpudp \
-                   kernel-module-xt-physdev \
-                   kernel-module-xt-comment \
-                   kernel-module-xt-nat \
-                   kernel-module-xt-masquerade \
-                  "
+RDEPENDS_${PN} += "bridge-utils"
 FILES_${PN} += "${sysconfdir}/network/interfaces.d/xenguest-network-bridge.cfg"
 FILES_${PN} += "${sysconfdir}/xenguest/init.pre/network-bridge.sh"
-FILES_${PN} += "${sysconfdir}/xen/scripts/vif-post.d/00-vif-xenguest.hook"
@@ -1,83 +0,0 @@
-From f88af7229f6f22ce7313c11a0bbb9c88317b7c5e Mon Sep 17 00:00:00 2001
-Message-Id: <f88af7229f6f22ce7313c11a0bbb9c88317b7c5e.1602759709.git.diego.sueiro@arm.com>
-From: Stefano Stabellini <stefano.stabellini@xilinx.com>
-Date: Thu, 24 Sep 2020 16:49:55 -0700
-Subject: [PATCH] xen/arm: do not setup the runstate info page if kpti is
- enabled
-
-The VCPUOP_register_runstate_memory_area hypercall takes a virtual
-address of a buffer as a parameter. The semantics of the hypercall are
-such that the virtual address should always be valid.
-
-When KPTI is enabled and we are running userspace code, the virtual
-address is not valid, thus, Linux is violating the semantics of
-VCPUOP_register_runstate_memory_area.
-
-Do not call VCPUOP_register_runstate_memory_area when KPTI is enabled.
-
-Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
-CC: Bertrand Marquis <Bertrand.Marquis@arm.com>
-CC: boris.ostrovsky@oracle.com
-CC: jgross@suse.com
-Link: https://lore.kernel.org/r/20200924234955.15455-1-sstabellini@kernel.org
-Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
-Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
-
-Upstream-Status: Backport
-Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
---
- arch/arm/include/asm/xen/page.h   | 5 +++++
- arch/arm/xen/enlighten.c          | 6 ++++--
- arch/arm64/include/asm/xen/page.h | 6 ++++++
- 3 files changed, 15 insertions(+), 2 deletions(-)
-
-diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h
-index 31bbc80..dc7f6e9 100644
--- a/arch/arm/include/asm/xen/page.h
-+++ b/arch/arm/include/asm/xen/page.h
-@@ -1 +1,6 @@
- #include <xen/arm/page.h>
-+
-+static inline bool xen_kernel_unmapped_at_usr(void)
-+{
-+	return false;
-+}
-diff --git a/arch/arm/xen/enlighten.c b/arch/arm/xen/enlighten.c
-index e93145d..ea76562 100644
--- a/arch/arm/xen/enlighten.c
-+++ b/arch/arm/xen/enlighten.c
-@@ -158,7 +158,8 @@ static int xen_starting_cpu(unsigned int cpu)
- 	BUG_ON(err);
- 	per_cpu(xen_vcpu, cpu) = vcpup;
- 
-	xen_setup_runstate_info(cpu);
-+	if (!xen_kernel_unmapped_at_usr())
-+		xen_setup_runstate_info(cpu);
- 
- after_register_vcpu_info:
- 	enable_percpu_irq(xen_events_irq, 0);
-@@ -387,7 +388,8 @@ static int __init xen_guest_init(void)
- 		return -EINVAL;
- 	}
- 
-	xen_time_setup_guest();
-+	if (!xen_kernel_unmapped_at_usr())
-+		xen_time_setup_guest();
- 
- 	if (xen_initial_domain())
- 		pvclock_gtod_register_notifier(&xen_pvclock_gtod_notifier);
-diff --git a/arch/arm64/include/asm/xen/page.h b/arch/arm64/include/asm/xen/page.h
-index 31bbc80..dffdc77 100644
--- a/arch/arm64/include/asm/xen/page.h
-+++ b/arch/arm64/include/asm/xen/page.h
-@@ -1 +1,7 @@
- #include <xen/arm/page.h>
-+#include <asm/mmu.h>
-+
-+static inline bool xen_kernel_unmapped_at_usr(void)
-+{
-+	return arm64_kernel_unmapped_at_el0();
-+}
-- 
-2.7.4
-
@@ -1,26 +0,0 @@
-CONFIG_NAMESPACES=y
-CONFIG_NET_NS=y
-CONFIG_PID_NS=y
-CONFIG_IPC_NS=y
-CONFIG_UTS_NS=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_CPUSETS=y
-CONFIG_MEMCG=y
-CONFIG_KEYS=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_VETH=y
-CONFIG_IPV6=y
-CONFIG_BRIDGE=y
-CONFIG_BRIDGE_NETFILTER=y
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_NAT=m
-CONFIG_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_IP_VS=y
-CONFIG_NETFILTER_XT_MATCH_IPVS=m
--- a/Show More
+++ b/Show More
				`@@ -1 +0,0 @@`
				`XENGUEST_NETWORK_BRIDGE_MEMBERS_gem5-arm64 ?= "eth0"`
				`@@ -1 +0,0 @@`
				`GRUB_BUILDIN += "${@bb.utils.contains('DISTRO_FEATURES', 'xen', 'xen_boot', '', d)}"`