1f6d3f6ef2
SGI575 throws a config warning when compiling the 5.7 kernel.
WARNING: linux-yocto-5.7.19+gitAUTOINC+b9e6fd082d_6b9830fecd-r0 do_kernel_configcheck: [kernel config]: specified values did not make it into the kernel's final configuration:
[NOTE]: 'CONFIG_USB_CONN_GPIO' last val (m) and .config val (y) do not match
[INFO]: CONFIG_USB_CONN_GPIO : y ## .config: 5334 :configs///defconfig (m)
[INFO]: raw config text:
config USB_CONN_GPIO
tristate "USB GPIO Based Connection Detection Driver"
select USB_ROLE_SWITCH
depends on GPIOLIB && USB_SUPPORT
help
The driver supports USB role switch between host and device via GPIO
based USB cable detection, used typically if an input GPIO is used
to detect USB ID pin, and another input GPIO may be also used to detect
Vbus pin at the same time, it also can be used to enable/disable
device if an input GPIO is only used to detect Vbus pin.
To compile the driver as a module, choose M here: the module will
be called usb-conn-gpio.ko
Config 'USB_CONN_GPIO' has the following Direct dependencies (USB_CONN_GPIO=y):
GPIOLIB(=y) && USB_SUPPORT(=y)
Parent dependencies are:
USB_SUPPORT [y] GPIOLIB [y]
[INFO]: selection details for 'CONFIG_USB_CONN_GPIO':
Symbols currently y-selecting this symbol:
- PHY_TEGRA_XUSB
It is using the defconfig from upstream Linux. So, change that
defconfig to correct the warning by changing USB_CONN_GPIO from 'm' to
'y'.
Change-Id: Ia5080f7f22d0f1aef065b58d8c3b0222625c8f58
Signed-off-by: Jon Mason <jon.mason@arm.com>
Introduction
This repository contains Arm layers for OpenEmbedded
meta-arm: This layer provides support for general recipes for the Arm architecture. Anything that's not needed explicitly for BSPs, the IOTA distribution, or destined to be upstreamed belongs here.
meta-arm-bsp: This layer provides support for Arm reference platforms
meta-arm-iota: This layer provides support for Arm's IOTA Linux Distribution
meta-arm-toolchain: This layer provides support for Arm's GNU-A toolset releases
meta-arm-autonomy: This layer provides a reference stack for autonomous systems.
Contributing
Currently, we only accept patches from the meta-arm mailing list. For general information on how to submit a patch, please read https://www.openembedded.org/wiki/How_to_submit_a_patch_to_OpenEmbedded
E-mail meta-arm@lists.yoctoproject.org with patches created using this process. You can configure git-send-email to automatically use this address for the meta-arm repository with the following git command:
$ git config --local --add sendemail.to meta-arm@lists.yoctoproject.org
Commits and patches added should follow the OpenEmbedded patch guidelines:
https://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines
The component being changed in the shortlog should be prefixed with the layer name (without the meta- prefix), for example:
arm-bsp/trusted-firmware-a: decrease frobbing level
arm-toolchain/gcc: enable foobar v2
Reporting bugs
E-mail meta-arm@lists.yoctoproject.org with the error encountered and the steps to reproduce the issue.
Maintainer(s)
- Jon Mason jon.mason@arm.com
- Ross Burton ross.burton@arm.com