The bcu command can be used to communicate with board control hardware on
NXP EVK development boards to:
- reset / power cycle the board into a specified boot mode.
- monitor the power consumption.
- read / write the eeprom content.
- measure temperatures.
- etc.
Supported boards are e.g.:
- i.MX8MP-EVK
- i.MX8DXL-EVK
- i.MX8ULP-EVK
- i.MX93-EVK
The tool can either be built for the target architecture to control a
board from a system running Yocto (less common) or for the host
architecture to run it via `oe-run-native bcu-native bcu`.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The `panel-mipi-dbi.bbclass` can be used to build a firmware file for use
with the `panel-mipi-dbi` Linux driver.
The class uses the `mipi-dbi-cmd` from `panel-mipi-dbi-native` to
assemble a human readable list of init commands into a firmware file
for use with the `panel-mipi-dbi` Linux driver.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This python script assembles a list of human readable commands into
a firmware blob.
The firmware blob is interpreted by the `panel-mipi-dbi` Linux driver
to initialize a MIPI DBI display panel and its controller.
MIPI DBI is not to be confused with MIPI DSI.
The former is usually used to drive small displays that are attached
via SPI, while the latter is a fast communication standard using
differential signaling, that is also suitable for larger displays.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add a (more helpful) error message in case the Package-Name exceeds a
certain length which would have the softhsm tools error out.
The $PN is used as 'label' in the softhsm, which is a
"CK_UTF8CHAR paddedLabel[32]" in softhsm2-util.cpp,
so it must not be longer.
Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add handling of ca-chains which can consist of more than one
certificate in a .pem file, which need to be split off, processed and
stored separately in the softhsm - as the tool-chain
signing.bbclass::signing_import_cert* -> softhsm -> 'extract-cert'
only supports one-per-file, due to using/expecting "plain" x509
in-/output.
The added signing_import_cert_chain_from_pem function takes a <role>
basename, and iterates through the input .pem file, creating numbered
<role>_1, _2, ... roles as needed.
Afterwards the certificates can be used or extracted one-by-one from
the softhsm, using the numbered roles; the only precondition - or
limitation - is that the PKI structure has to be known beforhand;
e.g. how many certificates are between leaf and root.
Signed-off-by: Johannes Schneider <johannes.schneider@leica-geosystems.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The zfs package content varies depending the host distro.
To fix this, force target distribution ("vendor") to Debian to match
default values for things like: NFS server service name, bash completion
path, configuration files, ...
The Debian values do match the OpenEmbedded ones.
Signed-off-by: Yoann Congal <yoann.congal@smile.fr>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
- add PACKAGECONFIG for lcms2
- fix dependencies for vulkan and vdpau
- replace leftover from autotools EXTRA_OECONF -> EXTRA_OEMESON
- vaapi-x-egl option has been removed
- gl-wayland option has been renamed to egl-wayland
- explicitly disable shaderc which is only required for windows builds
Signed-off-by: Markus Volk <f_l_k@t-online.de>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* this one has 2 versions, so the .inc file cannot be folded into .bb files
but we can at least rename it to start with BPN for consistency
Signed-off-by: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* rename python-rfc3986-validator to BPN python3-rfc3986-validator
which is included in default FILESPATH
Signed-off-by: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* python2 is long dead, kill .inc file as well
* rename python-flask-xstatic to BPN python3-flask-xstatic
which is included in default FILESPATH
Signed-off-by: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* 'files' was always in default FILESPATH, no need to add it again with FILESEXTRAPATHS
Signed-off-by: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* we already have a common directory in default FILESPATH called 'files'
Signed-off-by: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* I thought that PN in FILESEXTRAPATHS worked as everywhere else and
as described in:
https://lore.kernel.org/all/2261745fc01a4e3887ee98f98a425e88@vivavis.com/T/
* but surprisingly (to me)
FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}-2.x:"
ends with effectively ${BPN}-2.x in bitbake -e (and the build doesn't fail
to fetch file://gpio-manager.init in lib32-libgpiod build
* I've tried with kirkstone and dunfell as well and it ends with
"libgpiod-2.x" for all 3 PNs:
dunfell $ grep ^FILESEXTRAPATHS= env.* | sed 's@/OE.*dunfell/@@g'
env.lib32-libgpiod:FILESEXTRAPATHS="meta-oe/meta-oe/recipes-support/libgpiod/libgpiod-2.x:__default:"
env.libgpiod:FILESEXTRAPATHS="meta-oe/meta-oe/recipes-support/libgpiod/libgpiod-2.x:__default:"
env.libgpiod-native:FILESEXTRAPATHS="meta-oe/meta-oe/recipes-support/libgpiod/libgpiod-2.x:__default:"
dunfell $ grep ^PN= env.*
env.lib32-libgpiod:PN="lib32-libgpiod"
env.libgpiod:PN="libgpiod"
env.libgpiod-native:PN="libgpiod-native"
There is the QA check for PN in SRC_URI, maybe I took it a bit
further and updated all FILESEXTRAPATHS references as well in our
layers (in 2023) even when it wasn't causing build failures, e.g.:
https://github.com/webosose/meta-webosose/commit/38d3cbf010a5e4e112d82ee473eecc718d9cc687
* so it's not so important to use BPN, but it's a bit clearer as that's
what it ends evaluated into and what default FILESPATH is using as well:
meta/classes-global/base.bbclass:FILESPATH = "${@base_set_filespath(["${FILE_DIRNAME}/${BP}", "${FILE_DIRNAME}/${BPN}", "${FILE_DIRNAME}/files"], d)}"
meta/conf/bitbake.conf:#FILESPATH = "${FILE_DIRNAME}/${PF}:${FILE_DIRNAME}/${P}:${FILE_DIRNAME}/${PN}:${FILE_DIRNAME}/${BP}:${FILE_DIRNAME}/${BPN}:${FILE_DIRNAME}/files:${FILE_DIRNAME}"
BPN was added in denzil 2009 (and FILESPATH moved to base.bbclass,
bitbake.conf has commented-out value since then):
https://git.openembedded.org/openembedded-core/commit/?h=denzil&id=94c895aad5ad286f172b04bc33ba670220d5eba8
PF was dropped in dylan 2012:
https://git.openembedded.org/openembedded-core/commit/?h=dylan&id=3efa13cd76bbd5611805021945fc9def88d9fd93
P and PN were dropped shortly after in dylan 2012:
https://git.openembedded.org/openembedded-core/commit/?h=dylan&id=fb359583b659cda643973fa285002aaffb729a51
Signed-off-by: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
async_mqtt is an C++ library for asynchronous MQTT communication.
The library is header-only using C++17 and Boost libraries; the main
features are client and server support, MQTT v3.1.1 and v5.0 support,
continuous packet sending and auto acquiring/mapping topic alias is
supported.
Signed-off-by: Andrea Ricchi <andrea.ricchi@amarulasolutions.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The oe-core bbclass for GObject introspection sets GI_DATA_ENABLED if
the relevant distro feature is enabled. That means that it's up to the
inheriting recipe to disable it if needed.
For libgpiod: we only want to enable it if any of the GLib based
packages is being generated (GLib bindings, D-Bus daemon or ptest).
This also effectively reverts commit 78a332939f (libgpiod_2.2: depend
on glib-2.0) which indiscriminately pulls in GLib for all packages
generated by this recipe which feels like shooting a fly with a cannon.
Fixes: 9626e8a2c8 ("libgpiod: update to v2.2")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
New recipe with the static version of the Swagger UI.
This is *not* a NPM version of the website (swagger-ui, swagger-ui-dist, swagger-ui-react).
But the static release.
Plain old HTML/CSS/JS (Standalone)
The folder /dist includes all the HTML, CSS and JS files needed to run SwaggerUI on a static website or CMS, without requiring NPM.
Download the latest release.
Copy the contents of the /dist folder to your server.
Open swagger-initializer.js in your text editor and replace "https://petstore.swagger.io/v2/swagger.json" with the URL for your OpenAPI 3.0 spec.
-- https://github.com/swagger-api/swagger-ui/blob/HEAD/docs/usage/installation.md#plain-old-htmlcssjs-standalone
Signed-off-by: Jan Vermaete <jan.vermaete@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* the default from bitbake.conf:
S = "${WORKDIR}/${BP}"
works better, because it points to correct directory even with e.g. when
building lib32-libgpiod with multilib
Signed-off-by: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add 0002-util-mtp-hotplug.c-Enable-stack-memory-protection.patch:
Use "return 0" instead of "exit(0)" to let the program exit normally
by returning from the main function. This allows the compiler to
perform necessary cleanup operations, including stack canary checks.
Signed-off-by: Hieu Van Nguyen <hieu2.nguyen@lge.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
In my setup a build fails with
| checking for gobject-introspection... configure: error: gobject-introspection-1.0 is not installed
| NOTE: The following config.log files may provide further information.
| NOTE: /var/home/krm/build/oe-core_master/build/tmp/work/cortexa55-tdx-linux/libgpiod/2.2/build/config.log
| ERROR: configure failed
From config.log this seems to be related to glib-2.0 not found:
| configure:22484: $PKG_CONFIG --exists --print-errors "gobject-introspection-1.0"
| Package glib-2.0 was not found in the pkg-config search path.
| Perhaps you should add the directory containing `glib-2.0.pc'
| to the PKG_CONFIG_PATH environment variable
| Package 'glib-2.0', required by 'gobject-introspection-1.0', not found
| configure:22487: $? = 1
| configure:22491: error: gobject-introspection-1.0 is not installed
Note that glib-2.0.pc is present in recipes-sysroot-native but not
in recipes-sysroot.
Adding glib-2.0 to depends allows successful build of libgpiod 2.
Fixes: 117d09ce43c7 ("libgpiod: update to v2.2")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Bug fixes:
Fix handling of fields.Dict() with values unset
Other changes:
Officially support Python 3.13
Drop support for Python 3.8
Signed-off-by: Jan Vermaete <jan.vermaete@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Leonard Göhrs
Johannes Schneider
Yoann Congal
Markus Volk
Martin Jansa
Andrea Ricchi
Bartosz Golaszewski
Jan Vermaete
Hieu Van Nguyen
Alex Kiernan
Max Krummenacher
Khem Raj
J. S.