Eliminate references to syscalls not available
for ARM_EABI. Also add a dependency on libseccomp
which is needed for scfilter to work.
Set PACKAGECONFIG to not enable scfilter, since
kernel CONFIG_SECCOMP is unlikely to be set. This
aligns the usage of libseccomp with that of other packages.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
ERROR: libdnet-1.12-r0 do_fetch: Fetcher failure for URL: 'https://github.com/dugsong/libdnet/archive/libdnet-1.12.tar.gz'. Checksum mismatch!
File: '/home/akuster/oss/downloads/libdnet-1.12.tar.gz' has md5 checksum d2f1b72eac2a1070959667e9e61dcf20 when 9253ef6de1b5e28e9c9a62b882e44cc9 was expected
File: '/home/akuster/oss/downloads/libdnet-1.12.tar.gz' has sha256 checksum b6360659c93fa2e3cde9e0a1fc9c07bc4111f3448c5de856e095eb98315dd424 when 83b33039787cf99990e977cef7f18a5d5e7aaffc4505548a83d31bd3515eb026 was expected
use Gentoo url instead of github
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Error was not caused by RSS but upstream package path renaming without version
bump - tse tse...
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
(cherry picked from commit 3a9e21d928)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
If there is an invalid URL in URLS->buf after a valid one, uri_parse is
called with out pointing after the allocated memory. As uri_parse writes
to *out before returning an error the loop in create_url_list must be
stopped early to prevent an out-of-bound access
Signed-off-by: Andrej Valek <andrej.valek@siemens.com>
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
(cherry picked from commit b4659368a0)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Fixes:
ARNING: gflags-2.1.2-r0 do_fetch: Failed to fetch URL
git://github.com/gflags/gflags.git;branch=master, attempting MIRRORS if
available
ERROR: gflags-2.1.2-r0 do_fetch: Fetcher failure: Unable to find
revision 1a02f2851ee3d48d32d2c8f4d8f390a0bc25565c in branch master even
from upstream
ERROR: gflags-2.1.2-r0 do_fetch: Fetcher failure for URL:
'git://github.com/gflags/gflags.git;branch=master'. Unable to fetch URL
from any source
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
(cherry picked from commit 1ba2436bdd)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
In file included from <staging>/usr/include/c++/6.2.0/type_traits:35:0,
from <staging>/usr/include/sigc++-2.0/sigc++/visit_each.h:22,
from <staging>/usr/include/sigc++-2.0/sigc++/functors/slot.h:6,
from <staging>/usr/include/sigc++-2.0/sigc++/signal_base.h:27,
from <staging>/usr/include/sigc++-2.0/sigc++/signal.h:8,
from <staging>/usr/include/sigc++-2.0/sigc++/sigc++.h:104,
from <staging>/usr/include/glibmm-2.4/glibmm/thread.h:50,
from <staging>/usr/include/glibmm-2.4/glibmm.h:89,
from <staging>/usr/include/gtkmm-2.4/gtkmm.h:87,
from ../../gnome-system-monitor-2.28.2/src/procman.cpp:26:
<staging>/usr/include/c++/6.2.0/bits/c++0x_warning.h:32:2: error: #error This file requires compiler and library support for the ISO C++ 2011 standard. This support must be enabled with the -std=c++11 or -std=gnu++11 compiler options.
#error This file requires compiler and library support \
^~~~~
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
(cherry picked from commit ea4abd908f)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
ERROR: fetchmail-6.3.26-r0 do_checkuri: Fetcher failure for URL: 'http://download.berlios.de/fetchmail/fetchmail-6.3.26.tar.xz'. URL http://download.berlios.de/fetchmail/fetchmail-6.3.26.tar.xz doesn't work
ERROR: fetchmail-6.3.26-r0 do_checkuri: Function failed: do_checkuri
ERROR: Logfile of failure stored in: /home/akuster/oss/maint/poky/build/tmp/work/i586-poky-linux/fetchmail/6.3.26-r0/temp/log.do_checkuri.28438
ERROR: Task (/home/akuster/oss/maint/meta-openembedded/meta-networking/recipes-support/fetchmail/fetchmail_6.3.26.bb:do_checkuri) failed with exit code '1'
per homepage:
NEWS: NOW HOSTED BY SOURCEFORGE.NET AFTER BERLIOS SHUTDOWN
The BerliOS developer's website has shut down in the week following 2014 May 12th, and most of the fetchmail contents have been moved to SourceForge.net, including mailing list subscriptions, archives back to 2004, web site contents, download and Git repository. See http://sourceforge.net/projects/fetchmail/.
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
This should fix:
Making all in ui/gtk
| make[2]: Entering directory '/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5e-oe-linux-gnueabi/wireshark/1_2.2.4-r0/build/ui/gtk'
| /bin/bash: glib-compile-resources: command not found
Fix which glib-compile-resources is picked up. Ensure we use the native glib-2.0p version and not one from the host.
I could not reproduce this but "which glib-compile-resources" pointed out the problem.
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
The following vulnerabilities have been fixed:
* [1]wnpa-sec-2017-01
The ASTERIX dissector could go into an infinite loop. ([2]Bug
13344)
* [3]wnpa-sec-2017-02
The DHCPv6 dissector could go into a large loop. ([4]Bug 13345)
see: https://www.wireshark.org/docs/relnotes/wireshark-2.2.4.html
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Fix packaging of libvlc_vdpau.so since this plugin
does not have soname version
Fixes
QA Issue: non -dev/-dbg/nativesdk- package contains symlink .so: vlc path '/work/cortexa7hf-neon-vfpv4-oe-linux-gnueabi/vlc/2.2.2-r0/packages-split/vlc/usr/lib/vlc/libvlc_vdpau.so' [dev-so]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
(cherry picked from commit 7c670ff337)
Signed-off-by: Armin Kuster <akuster808@gmail.com>
It calls icu-config to detect icu support in file makedefs of postfix.
The compile results are different depends on whether icu has been built
already.
postfix should provide Unicode support, so add dependency icu to solve
the problem.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Issue: LIN8-5177
When 'USE_OPENSSL=1' is configured for crda, key2pub.py doesn't
create "keys-ssl.c" with target's word size. Pass 'SITEINFO_BITS'
from building system to key2pub.py.
(LOCAL REV: NOT UPSTREAM) -- sent to oe-devel on 20161130
Signed-off-by: Haiqing Bai <Haiqing.Bai@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Fixed when len(TMPDIR) = 410:
aclocal: error: cannot open echo [snip]: Argument list too long
This is becuase it has a lot of m4 files, use relative path for them
can fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Fixed when len(TMPDIR) = 410:
aclocal: error: cannot open echo [snip]: Argument list too long
This is becuase it has a lot of m4 files, use relative path for them
can fix the problem.
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
If no network connection appears within DefaultTimeoutStartSec
(~ 90s) after startup, nmbd fails to notify systemd and will
therefore get killed.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Replace the hardcoded path with base_bindir in init
script to fix the error:
/etc/init.d/samba.sh: line 15: /usr/bin/ps: No such file or directory
/etc/init.d/samba.sh: line 17: /usr/bin/sed: No such file or directory
/etc/init.d/samba.sh: line 16: /usr/bin/grep: No such file or directory
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Backport a succeeding commit from net-snmp upstream to fix the issue
introduced by commit
<BUG#a2584: Fix snmptrap to use clientaddr from snmp.conf>.
The missing return will cause crash when binding to a non-exist IPv6
address.
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Under IPv6 IP-multihomed environment, the socket does not bind to the
clientaddr indicated in snmp.conf when sending snmptrap and it might
choose a random one.
Backport the patch from net-snmp upstream to fix it.
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
By defining 'listen-address' in the global dnsmasq.conf file we
prevent other instances of dnsmasq from using the global config as we
will get an error that the address is already in use. Instead we pass
'local-service' when we start the main dnsmasq instance which will
listen on the loopback address as well as any other local
subnets. This will allow the main dnsmasq instance to play nice with
other instances we might start for network-manager, libvirt, lxc...
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
The dnsmasq package installs a ${sysconfigdir}/dnsmasq.d directory but
doesn't currently use any configuration files that might be placed
there. This goes against what the user would expect and doesn't match
what you see in other distros.
We could ensure this config directory is read when dnsmasq is started,
as we are doing here, or by including it in the main dnsmasq.conf
file. By doing it here we can have better reuseability of the main
dnsmasq.conf file by other instances of dnsmasq.
There are currently no files added to the dnsmasq.d directory for core
oe images, so this should not result in any runtime behavior changes.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
curlpp is configured with boost by default. And it searches boost
directory on build machine. If boost is installed on build machine, then
causes qa issue:
| ERROR: curlpp-0.7.3-r0 do_configure: This autoconf log indicates
| errors, it looked at host include and/or library paths while
| determining system capabilities.
Pass the boost directory in ${STAGING_DIR_HOST} to configure script to
disable search on build machine to fix the issue.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Joe Slater
Armin Kuster
Andreas Müller
Khem Raj
Max Krummenacher
Thomas PERROT
Andrej Valek
Ricardo Ribalda Delgado
Oleksandr Kravchuk
Andreas Oberritter
Kai Kang
Armin Kuster
Chai, Chong Yi
Zheng Ruoqin
Chen Qi
Haiqing Bai
Robert Yang
Jackie Huang
Li Zhou
Mark Asselstine