Building samba with sysvinit currently throws a QA warning about
"invalid PACKAGECONFIG: sysv". This fixes that issue.
Signed-off-by: Stephano Cetola <stephanoc@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1) Upgrade opensaf from 4.6.0 to 4.7.0.
2) Delete two patches,since they are not needed any more.
Revert_imma_client_node_replyPending_to_unsigned_char.patch
Fix_GCC_5.1.0_compiler_warning.patch
Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
While building an image I was getting an error during rootfs creation
that ctdb was conflicting with base-files as both were creating
'/var/run':
warning: Removing ctdb-2.5.1-r0@core2_64 due to file /var/run \
conflicting with base-files-3.0.14-r89@genericx86_64
This is normally a volatile directory so we have no need
to include this in the ctdb package, so revert the actions of the
Makefile by deleting the directory.
Although /run and $localstatedir/run are linked to be consistent we
update the .service file to use the latter. To ensure the 'ctdb'
subdir exists we patch the use of RuntimeDirectory= in to the .service
file. This will compensate for our removal of this directory creation
from the Makefile.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Depending on PACKAGECONFIG selection, the /run/samba directory may not
have been created. Make the do_install_append handle both situations
by checking whether these directories exist before attempting to remove
them.
This fixes do_install failing with an error like this:
rmdir: failed to remove '/.../samba/4.1.12-r0/image/run/samba': No such file or directory
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
We should always specify a commit id for git SRCREV or
we will try to access the upstream repo when fetching.
In addition, if our PV is just "git" we will access upstream
when doing archiver functions, so we should specify PV for
xyz_git.bb recipes.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Dnsmasq functions as DHCP and DNS servers by default and listens on all
interfaces. This conflicts with other DHCP or DNS servers already on
the network and corrupts DNS configuration on Windows systems.
We noticed that after installing docker, the Linux system became a
magnet for DNS requests coming from Windows systems. Dnsmasq is a
dependency for lxc which is recommended for docker.
Windows periodically broadcasts DHCPInform and DHCP servers reply with
DHCPAck. If the DHCPAck from the Linux target reaches the Windows
system first, Windows changes its DNS server IP to the Linux system
running dnsmasq. Dnsmasq ends up forwarding the DNS requests to the
official DNS server and replies back the answer to the original
requestor. The Linux system transparently becomes a DNS proxy on the
subnet.
Signed-off-by: Ovidiu Vancea <ovidiu.vancea@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* Adds a new mode for samba cross-compiling:
When both --cross-answers and --cross-execute are set, this means:
- Use cross-answers
- If answer is unknown, then instead of adding UNKNOWN to the cross-answers
file and failing configure, the new mode runs cross-execute to determine the
answer and adds that to the cross-answers file.
* And some fixes and improvements for cross-compiling.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
- The tmpfiles are always installed in /usr/lib
even for multilib.
- It makes no sense to have two tmpfiles in both
/usr/lib/tmpfiles.d and /etc/tmpfiles.d, install
it as one in /etc/tmpfiles.d.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* cifs.idmap links with keyutils as log.do_package shows:
DEBUG: cifs-utils: Dependency libkeyutils.so.1 requires package keyutils (used by files: /home2/mjansa/build/build-starfish-jethro/BUILD/work/h15-starfish-linux-gnueabi/cifs-utils/6.4-r0/packages-split/cifs-utils/usr/sbin/cifs.idmap)
* that causes following QA issue when keyutils are autodetected from
sysroot:
WARNING: QA Issue: cifs-utils rdepends on keyutils, but it isn't a build dependency? [build-deps]
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* otherwise there are unpackaged files:
ERROR: QA Issue: cifs-utils: Files/directories were installed but not shipped in any package:
/usr/lib/security
/usr/lib/security/pam_cifscreds.so
/usr/lib/security/.debug
/usr/lib/security/.debug/pam_cifscreds.so
Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install.
cifs-utils: 4 installed and not shipped files. [installed-vs-shipped]
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
While hostname is numeric, start postfix failed
...
root@qemux86-64:~# hostname 1.2.3.4
root@qemux86-64:~# systemctl restart postfix
|Job for postfix.service failed because the control process exited
with error code. See "systemctl status postfix.service" and
"journalctl -xe" for details.
root@qemux86-64:~# systemctl status postfix -l
Dec 02 08:05:40 1.2.3.4 aliasesdb[535]: /usr/sbin/postconf: fatal: unable to use my own hostname
Dec 02 08:05:41 1.2.3.4 aliasesdb[535]: newaliases: warning: valid_hostname: numeric hostname: 1.2.3.4
Dec 02 08:05:41 1.2.3.4 postfix/sendmail[537]: warning: valid_hostname: numeric hostname: 1.2.3.4
Dec 02 08:05:41 1.2.3.4 aliasesdb[535]: newaliases: fatal: unable to use my own hostname
Dec 02 08:05:42 1.2.3.4 postfix[540]: warning: valid_hostname: numeric hostname: 1.2.3.4
Dec 02 08:05:42 1.2.3.4 postfix[540]: fatal: unable to use my own hostname
...
Refer meta/recipes-core/initscripts/initscripts-1.0/hostname.sh in oe-core,
add check_hostname.sh and invoke it before postfix start, if the hostname
is invalid, set "localhost" to main.cf.
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
samba-pidl is the package containing the perl-extension, so RDEPENDS
must include perl for samba-pidl, not for samba.
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Since entire samba4 package is around 25MB, trying to save some space by
splitting the package into several ones logically grouped as they were
at samba3 in fido.
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
when net-snmp-config is used to configure by other package, and fail since
/libnl3 is not found, in fact, it should be -I/usr/include/libnl3, and is
modified as /libnl3 incorrectly.
instead of modify the net-snmp-config for target, the one under
${bindir_crossscripts} should be replaced with ${TAGING_INCDIR}
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
The element skc_v6_daddr (in struct sock_common) is defined in
kernel source only when CONFIG_IPV6 is enabled. Hence, access
sk_v6_daddr element (i.e __sk_common.skc_v6_daddr) only when CONFIG_IPV6
is defined; to fix below error in world build:
-- snip --
/home/jenkins/oe/world/shr-core/tmp-glibc/work-shared/qemux86/kernel-source/include/net/sock.h:330:33: error: 'struct sock_common' has no member named 'skc_v6_daddr'
-- CUT --
Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Fixes strongswan configure script for systemd >= 209,
where it merged libsystemd-journal and libsystemd-daemon
into libsystemd.
Signed-off-by: Chris Patterson <pattersonc@ainfosec.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
- Add aesni, charon, gmp, openssl, scep, stroke, swanctl, and
systemd-charon.
- Organize the packageconfig list alphabetically.
- Update the default PACKAGECONFIG to match current defaults.
- If swanctl is enabled, use strongswan-swanctl.service instead of
strongswan.service.
Signed-off-by: Chris Patterson <pattersonc@ainfosec.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* Add configure options '--without-valgrind'
* Disable valgrind by default since it doesn't build for all targets
This fixes build errors:
../source3/include/includes.h:156:31: fatal error: \
valgrind/memcheck.h: No such file or directory
compilation terminated.
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* libldb is autodetected from sysroot:
WARN: ctdb: ctdb rdepends on libtdb, but it isn't a build dependency?
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
When compile with gcc 5.x, xl2tpd complains warnings:
| misc.h:68:20: warning: inline function 'swaps' declared but never
defined
| extern inline void swaps (void *, int);
| ^
Backport patch to fix it.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
In ospf6_clean, the variable ospf6 might be NULL causing segment fault
when stopping ospf6d. Check the variable before referencing it.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
7fb5479 added the patch but did not apply it
Rename patch to explicit it differentiate it from other patches
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Since waf doesn't allow override check results via environment, a patch
is needed to remove the bad check when an optional feature is unwanted.
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Since waf configure infrastructure is a body blow compared to reasonable
autoconf script from packager point of view, samba support libs need
feature-disable-patches. This one is for libtevent removing libcap
(introduced by libldap_r) and attr.
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Add a patch to remove the check for openldap but mark prove result negative unless
ldap dependency is enabled explicitely.
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
During fix for distinguishing between lsb flavoured sysv init and pure, on the
rocks version, author introduced a typo.
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
To avoid errors when building dev-images (talloc-dev is missing), and to avoid
insane empty packages for that, rename talloc -> libtalloc as libtevent shows.
With that, remove dependencies to attr/xattr - unless explicitely enabled via
PACKAGECONFIG.
Signed-off-by: Jens Rehsack <sno@netbsd.org>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
mime-construct only provides a perl script and depends on many perl
modules that cause layer meta-networking depends on meta-perl.
Move mime-construct from meta-networking to meta-perl to avoid the
layer dependency.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Update runtime dependencies of mime-construct:
* drop WaitStat.pm and Signal.pm which are from libproc-waitstat-perl
and its dependency libipc-signal-perl
* add patch to return 0 for option '--help'
* replace postfix with msmtp which is more lightweight
* add perl modules which are required for mime-construct to run
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
restore PE
updated comments:
QT is the new default GUI for the binary 'wireshark'. This mode is currently disabled in the build. We build with GTK as the default gui so the resulting binary is now wireshark-gtk.
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Kernel modules may not have the same architecture as user space. So we
tell INSANE_SKIP to skip checking the arch for the modules. This is
consistent with other kernel modules and the kernel recipe.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Richard Purdie
Stephano Cetola
Dai Caiyun
Nate Karstens
Mark Asselstine
Joe Slater
mike.looijmans@topic.nl
Ovidiu Vancea
Jackie Huang
Roy Li
Martin Jansa
Hongxu Jia
Jens Rehsack
Armin Kuster
Jagadeesh Krishnanjanappa
Kai Kang
Chris Patterson
Wenzong Fan
Qi.Chen@windriver.com
Rafaël Carré