Enable KERNEL_64_USERSPACE_32 when powerpc is using 64bit kernel and 32bit
userspace.
Some structs, which is used to communicate between user space and kernel,
have the alignment issue on 64bit kernel with 32 bit userspace. To fix
this issue, ebtables redefines these struct, not use the kernel(sysroot)
include/uapi/linux/netfilter_bridge/ebtables.h, like ebt_entry_target:
The kernel's:
struct ebt_entry_target {
union {
char name[EBT_FUNCTION_MAXNAMELEN];
struct xt_target *target;
} u;
/* size of data */
unsigned int target_size;
unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
};
The ebtables:
struct ebt_entry_target
{
union {
char name[EBT_FUNCTION_MAXNAMELEN];
struct ebt_target *target;
} u;
/* size of data */
unsigned int target_size;
|#ifdef KERNEL_64_USERSPACE_32
unsigned int pad;
|#endif
unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
};
If the MLPREFIX of package matchs "lib.?32", the 32bit multilib package on
64bit kernel is being built, then enable KERNEL_64_USERSPACE_32.
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Update systemd service files of samba. There are no '@BASE_BINDIR@' and
'@SBINDIR@' in these service files, so drop the original replacement.
Command kill is installed to /bin/kill, then correct in the service files.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
netkit-ftp-0.17: Symlink /usr/bin/pftp in netkit-ftp points to TMPDIR [symlink-to-sysroot]
lib32-netkit-ftp-0.17: Symlink /usr/bin/pftp in lib32-netkit-ftp points to TMPDIR [symlink-to-sysroot]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Fixed:
cim-schema-exper-2.39.0: cim-schema-exper: /cim-schema-exper/usr/share/mof/cimv2.39.0/Network/CIM_IPAddressRange.mof is owned by uid 15220, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
cim-schema-final-2.40.0: cim-schema-final: /cim-schema-final/usr/share/mof/cimv2.40.0/Network/CIM_IPAddressRange.mof is owned by uid 15220, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
lib32-cim-schema-exper-2.39.0: lib32-cim-schema-exper: /lib32-cim-schema-exper/usr/share/mof/cimv2.39.0/Network/CIM_IPAddressRange.mof is owned by uid 15220, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
lib32-cim-schema-final-2.40.0: lib32-cim-schema-final: /lib32-cim-schema-final/usr/share/mof/cimv2.40.0/Network/CIM_IPAddressRange.mof is owned by uid 15220, which is the same as the user running bitbake. This may be due to host contamination [host-user-contaminated]
It uses cp -a to install the files, so fix the owner to root:root
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Fixed when build with multilib:
lib32-nbd-3.11: lib32-nbd: Files/directories were installed but not shipped in any package:
/usr/sbin/nbd-client
/usr/bin/nbd-trdump
/usr/bin/nbd-server
Please set FILES such that these items are packaged. Alternatively if they are unneeded, avoid installing them or delete them within do_install.
lib32-nbd: 3 installed and not shipped files. [installed-vs-shipped]
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Wireshark official site keeps in /src only latest
versions of sources, moving them to /src/all-versions
after some time.
Update the SRC_URI string so wireshark can be built
even after few month after release.
Signed-off-by: Ruslan Bilovol <rbilovol@cisco.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Depending on the configuration used to build ntp it is possible to
have an empty libexecdir. This can cause QA issues. Add a test at the
end of install() to remove libexecdir if it is empty, thus avoiding
the possibility of QA issues, regardless of configuration.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
This patch enhances a previously unapplied patch on jethro, plus adds
some flexibility in terms of required deps and a few cleanups.
Signed-off-by: Stephen Arnold <stephen.arnold42@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* Update the checksum of the license text to include all the
license text to instead of the previous only from two to
three line.
* Customize compile option such as CFLAGS= -D_GNU_SOURCE
and the specific install folder.
* Customize pam configuration file for rsh, rexec.
and rlogin to make them work.
* Update the line "server = /usr/bin/tcpd" to
"server = /usr/sbin/tcpd" for /etc/xinetd.d/{rexec,rlogin,rsh}.
* Fix some typo such as replace RPROVIDES_${PN}-rshd = "rshd"
to RPROVIDES_${PN}-server = "rshd"
* Fix host variable when rsh is renamed to other.
* Add rexec to support ipv6.
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* Add oe_runmake line for telnetlogin to make the telnetlogin
folder to be built.
* Add FILES_${PN} line to let ${libdir}/telnetlogin to be
included in netkit-telnet package.
* Customize "install -D -m 4750 ${B}/telnetlogin/telnetlogin
${D}/${libdir}/telnetlogin" to let the telnetlogin to be
installed under /usr/lib64 on 64bit system.
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
QA error fix:
ERROR: QA Issue: ntp: Files/directories were installed but not shipped in any package:
/usr/libexec
CVES addressed:
Bug 2948 / CVE-2015-8158
Bug 2945 / CVE-2015-8138: origin: Zero Origin Timestamp Bypass
Bug 2942 / CVE-2015-7979: Off-path Denial of Service (DoS) attack on authenticated broadcast mode
Bug 2940 / CVE-2015-7978: Stack exhaustion in recursive traversal of restriction list
Bug 2939 / CVE-2015-7977: reslist NULL pointer dereference
Bug 2938 / CVE-2015-7976: ntpq saveconfig command allows dangerous characters in filenames
Bug 2937 / CVE-2015-7975: nextvar() missing length check
Bug 2936 / CVE-2015-7974: Skeleton Key: Missing key check allows impersonation between authenticated peers
Bug 2935 / CVE-2015-7973: Deja Vu: Replay attack on authenticated broadcast mode
Bug 2947 / CVE-2015-8140: ntpq vulnerable to replay attacks
Bug 2946 / CVE-2015-8139: Origin Leak: ntpq and ntpdc, disclose origin
NTP-4.2.8p5
NtpBug2956: Small-step/Big-step CVE-2015-5300
Bug #2829 Clean up pipe_fds in ntpd.c
Bug #2887 stratum -1 config results as showing value 99.
Bug #2932 Update leapsecond file info in miscopt.html.
Bug #2934 tests/ntpd/t-ntp_scanner.c has a magic constant wired in.
Bug #2944 errno is not preserved properly in ntpdate after sendto call.
Bug #2952 peer associations were broken by the fix for NtpBug2901 CVE-2015-7704
Bug #2954 Version 4.2.8p4 crashes on startup on some OSes.
Bug #2957 'unsigned int' vs 'size_t' format clash.
Bug #2958 ntpq: fatal error messages need a final newline.
Bug #2962 truncation of size_t/ptrdiff_t on 64bit targets.
Bug #2965 Local clock didn't work since 4.2.8p4.
Bug #2967 ntpdate command suffers an assertion failure
Bug #2969 Seg fault from ntpq/mrulist when looking at server with lots of clients.
Bug #2971 ntpq bails on ^C: select fails: Interrupted system call
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
This recipe currently relies on EXTRA_OEMAKE having been to set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make
this explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
This recipe currently relies on EXTRA_OEMAKE having been to set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make
this explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
This recipe currently relies on EXTRA_OEMAKE having been to set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make
this explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
This recipe currently relies on EXTRA_OEMAKE having been to set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make
this explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
This recipe currently relies on EXTRA_OEMAKE having been to set to
"-e MAKEFLAGS=" in bitbake.conf to operate. It is necessary to make
this explicit so that the default in bitbake.conf can be changed.
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Building samba with sysvinit currently throws a QA warning about
"invalid PACKAGECONFIG: sysv". This fixes that issue.
Signed-off-by: Stephano Cetola <stephanoc@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1) Upgrade opensaf from 4.6.0 to 4.7.0.
2) Delete two patches,since they are not needed any more.
Revert_imma_client_node_replyPending_to_unsigned_char.patch
Fix_GCC_5.1.0_compiler_warning.patch
Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
While building an image I was getting an error during rootfs creation
that ctdb was conflicting with base-files as both were creating
'/var/run':
warning: Removing ctdb-2.5.1-r0@core2_64 due to file /var/run \
conflicting with base-files-3.0.14-r89@genericx86_64
This is normally a volatile directory so we have no need
to include this in the ctdb package, so revert the actions of the
Makefile by deleting the directory.
Although /run and $localstatedir/run are linked to be consistent we
update the .service file to use the latter. To ensure the 'ctdb'
subdir exists we patch the use of RuntimeDirectory= in to the .service
file. This will compensate for our removal of this directory creation
from the Makefile.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Depending on PACKAGECONFIG selection, the /run/samba directory may not
have been created. Make the do_install_append handle both situations
by checking whether these directories exist before attempting to remove
them.
This fixes do_install failing with an error like this:
rmdir: failed to remove '/.../samba/4.1.12-r0/image/run/samba': No such file or directory
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
We should always specify a commit id for git SRCREV or
we will try to access the upstream repo when fetching.
In addition, if our PV is just "git" we will access upstream
when doing archiver functions, so we should specify PV for
xyz_git.bb recipes.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Dnsmasq functions as DHCP and DNS servers by default and listens on all
interfaces. This conflicts with other DHCP or DNS servers already on
the network and corrupts DNS configuration on Windows systems.
We noticed that after installing docker, the Linux system became a
magnet for DNS requests coming from Windows systems. Dnsmasq is a
dependency for lxc which is recommended for docker.
Windows periodically broadcasts DHCPInform and DHCP servers reply with
DHCPAck. If the DHCPAck from the Linux target reaches the Windows
system first, Windows changes its DNS server IP to the Linux system
running dnsmasq. Dnsmasq ends up forwarding the DNS requests to the
official DNS server and replies back the answer to the original
requestor. The Linux system transparently becomes a DNS proxy on the
subnet.
Signed-off-by: Ovidiu Vancea <ovidiu.vancea@ni.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* Adds a new mode for samba cross-compiling:
When both --cross-answers and --cross-execute are set, this means:
- Use cross-answers
- If answer is unknown, then instead of adding UNKNOWN to the cross-answers
file and failing configure, the new mode runs cross-execute to determine the
answer and adds that to the cross-answers file.
* And some fixes and improvements for cross-compiling.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
- The tmpfiles are always installed in /usr/lib
even for multilib.
- It makes no sense to have two tmpfiles in both
/usr/lib/tmpfiles.d and /etc/tmpfiles.d, install
it as one in /etc/tmpfiles.d.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Roy Li
Kai Kang
George McCollister
Richard Purdie
Robert Yang
Ruslan Bilovol
Mark Asselstine
Joe MacDonald
Stephen Arnold
Mingli Yu
Armin Kuster
Fabio Berton
Mike Crowe
Martin Jansa
Stephano Cetola
Dai Caiyun
Nate Karstens
Joe Slater
mike.looijmans@topic.nl
Ovidiu Vancea
Jackie Huang