kas: split into unique files and add testimage

Refactor the existing kas configuration by splitting it into a shared
base.yml and a set of per-machine include files. This allows for easier
usage and potential CI use cases.

Also, change the readme to reflect the new changes.

Signed-off-by: Jon Mason <jon.mason@arm.com>

README.md

@@ -76,14 +76,31 @@ This layer depends on:
 
 ## Quick Start with kas
 
-1. Install kas build tool from PyPi (sudo pip3 install kas)
-2. Set the `machine: ` in kas-poky-rpi.yml to one of the supported boards (see conf/machine/*.conf)
-3. kas build meta-raspberrypi/kas-poky-rpi.yml
-4. Use bmaptool to copy the generated .wic.bz2 file to the SD card
-5. Boot your RPI
+1. Install the kas build tool from PyPI:
 
-To adjust the build configuration with specific options (I2C, SPI, ...), simply add
-a section as follows:
+   ```
+   pip3 install kas
+   ```
+
+2. Select the appropriate machine configuration file from `kas/`
+   (for example `raspberrypi4.yml`, `raspberrypi3-64.yml`, etc.)
+
+3. Run the build:
+
+   ```
+   kas build meta-raspberrypi/kas/<machine>.yml
+   ```
+
+4. Use `bmaptool` to copy the generated `.wic.bz2` image to the SD card
+
+5. Boot your Raspberry Pi
+
+The kas configuration is split into a shared `base.yml` and per-machine
+configuration files. Machine selection is done by choosing the appropriate
+kas file rather than editing a `machine` variable.
+
+To adjust the build configuration with specific options (I2C, SPI, etc.),
+extend the configuration by adding a `local_conf_header` section, for example:
 
 ```
 local_conf_header:
@@ -92,10 +109,16 @@ local_conf_header:
     RPI_EXTRA_CONFIG = "dtoverlay=disable-bt"
 ```
 
-To configure the machine, you have to update the `machine` variable.
-And the same for the `distro`.
+Additional configurations can be layered by including extra kas files. For example,
+to enable runtime testing with `testimage`:
+
+```
+kas build meta-raspberrypi/kas/raspberrypi4.yml:meta-raspberrypi/kas/testimage.yml
+```
+
+For further details, see the kas documentation:
+https://kas.readthedocs.io/en/latest/index.html
 
-For further information, you can read more at <https://kas.readthedocs.io/en/latest/index.html>
 
 ## Contributing
 

kas/base.yml

@@ -1,40 +1,41 @@
+# yaml-language-server: $schema=https://raw.githubusercontent.com/siemens/kas/master/kas/schema-kas.json
+#
 header:
-  version: 8
+  version: 14
 
-machine: raspberrypi4
+machine: unset
 distro: poky
 target:
   - core-image-base
 
+defaults:
+  repos:
+    branch: master
+
 repos:
   meta-raspberry:
 
   bitbake:
     url: https://git.openembedded.org/bitbake
     path: layers/bitbake
-    branch: master
     layers:
       bitbake: disabled
 
   openembedded-core:
     url: https://git.openembedded.org/openembedded-core
     path: layers/openembedded-core
-    branch: master
     layers:
       meta:
 
   meta-yocto:
     url: https://git.yoctoproject.org/meta-yocto
     path: layers/meta-yocto
-    branch: master
     layers:
       meta-poky:
-      meta-yocto-bsp:
 
   meta-openembedded:
     url: http://git.openembedded.org/meta-openembedded
     path: layers/meta-openembedded
-    branch: master
     layers:
       meta-oe:
       meta-python:
@@ -44,16 +45,20 @@ repos:
   meta-qt5:
     url: https://github.com/meta-qt5/meta-qt5/
     path: layers/meta-qt5
-    branch: master
+
+env:
+  BB_LOGCONFIG: ""
+  BB_HASHSERVE: "auto"
 
 bblayers_conf_header:
   standard: |
     POKY_BBLAYERS_CONF_VERSION = "2"
     BBPATH = "${TOPDIR}"
     BBFILES ?= ""
+
 local_conf_header:
   reduce_diskspace: |
-    INHERIT += "rm_work_and_downloads"
+    INHERIT += "rm_work"
   standard: |
     CONF_VERSION = "2"
     PACKAGE_CLASSES = "package_rpm"
@@ -72,7 +77,3 @@ local_conf_header:
         HALT,${DL_DIR},100M,1K \
         HALT,${SSTATE_DIR},100M,1K \
         HALT,/tmp,10M,1K"
-  license: |
-    # Uncomment next line to allow the license
-    # See: linux-firmware-rpidistro in docs/ipcompliance.md
-    #LICENSE_FLAGS_ACCEPTED = "synaptics-killswitch"

kas/raspberrypi.yml

@@ -0,0 +1,8 @@
+# yaml-language-server: $schema=https://raw.githubusercontent.com/siemens/kas/master/kas/schema-kas.json
+
+header:
+  version: 14
+  includes:
+    - kas/base.yml
+
+machine: raspberrypi

kas/raspberrypi0.yml

@@ -0,0 +1,8 @@
+# yaml-language-server: $schema=https://raw.githubusercontent.com/siemens/kas/master/kas/schema-kas.json
+
+header:
+  version: 14
+  includes:
+    - kas/base.yml
+
+machine: raspberrypi0

kas/raspberrypi2-64.yml

@@ -0,0 +1,8 @@
+# yaml-language-server: $schema=https://raw.githubusercontent.com/siemens/kas/master/kas/schema-kas.json
+
+header:
+  version: 14
+  includes:
+    - kas/base.yml
+
+machine: raspberrypi2-64

kas/raspberrypi2.yml

@@ -0,0 +1,8 @@
+# yaml-language-server: $schema=https://raw.githubusercontent.com/siemens/kas/master/kas/schema-kas.json
+
+header:
+  version: 14
+  includes:
+    - kas/base.yml
+
+machine: raspberrypi2

kas/raspberrypi3-64.yml

@@ -0,0 +1,14 @@
+# yaml-language-server: $schema=https://raw.githubusercontent.com/siemens/kas/master/kas/schema-kas.json
+
+header:
+  version: 14
+  includes:
+    - kas/base.yml
+
+local_conf_header:
+  license: |
+    # Uncomment next line to allow the license
+    # See: linux-firmware-rpidistro in docs/ipcompliance.md
+    LICENSE_FLAGS_ACCEPTED = "synaptics-killswitch"
+
+machine: raspberrypi3-64

kas/raspberrypi3.yml

@@ -0,0 +1,14 @@
+# yaml-language-server: $schema=https://raw.githubusercontent.com/siemens/kas/master/kas/schema-kas.json
+
+header:
+  version: 14
+  includes:
+    - kas/base.yml
+
+local_conf_header:
+  license: |
+    # Uncomment next line to allow the license
+    # See: linux-firmware-rpidistro in docs/ipcompliance.md
+    LICENSE_FLAGS_ACCEPTED = "synaptics-killswitch"
+
+machine: raspberrypi3

kas/raspberrypi4-64.yml

@@ -0,0 +1,14 @@
+# yaml-language-server: $schema=https://raw.githubusercontent.com/siemens/kas/master/kas/schema-kas.json
+
+header:
+  version: 14
+  includes:
+    - kas/base.yml
+
+local_conf_header:
+  license: |
+    # Uncomment next line to allow the license
+    # See: linux-firmware-rpidistro in docs/ipcompliance.md
+    LICENSE_FLAGS_ACCEPTED = "synaptics-killswitch"
+
+machine: raspberrypi4-64

kas/raspberrypi4.yml

@@ -0,0 +1,14 @@
+# yaml-language-server: $schema=https://raw.githubusercontent.com/siemens/kas/master/kas/schema-kas.json
+
+header:
+  version: 14
+  includes:
+    - kas/base.yml
+
+local_conf_header:
+  license: |
+    # Uncomment next line to allow the license
+    # See: linux-firmware-rpidistro in docs/ipcompliance.md
+    LICENSE_FLAGS_ACCEPTED = "synaptics-killswitch"
+
+machine: raspberrypi4

kas/testimage.yml

@@ -0,0 +1,28 @@
+# yaml-language-server: $schema=https://raw.githubusercontent.com/siemens/kas/master/kas/schema-kas.json
+
+header:
+  version: 14
+
+local_conf_header:
+  testimage: |
+    IMAGE_CLASSES += "testimage"
+    TESTIMAGE_AUTO = "1"
+    # Don't testimage initramfs
+    TESTIMAGE_AUTO:pn-core-image-initramfs-boot = "0"
+  kvm: |
+    QEMU_USE_KVM = ""
+  slirp: |
+    TEST_RUNQEMUPARAMS = "slirp"
+  sshd: |
+    IMAGE_FEATURES += "ssh-server-dropbear"
+  sshkeys: |
+    CORE_IMAGE_EXTRA_INSTALL += "ssh-pregen-hostkeys"
+  sshpregen: |
+    # Allow the use of the pregen keys as this is CI so safe
+    COMPATIBLE_MACHINE:pn-ssh-pregen-hostkeys:raspberrypi = "raspberrypi"
+    COMPATIBLE_MACHINE:pn-ssh-pregen-hostkeys:raspberrypi0 = "raspberrypi0"
+    COMPATIBLE_MACHINE:pn-ssh-pregen-hostkeys:raspberrypi2 = "raspberrypi2"
+    COMPATIBLE_MACHINE:pn-ssh-pregen-hostkeys:raspberrypi3-64 = "raspberrypi3-64"
+    COMPATIBLE_MACHINE:pn-ssh-pregen-hostkeys:raspberrypi4-64 = "raspberrypi4-64"
+  failing_tests: |
+    TEST_SUITES:remove = "parselogs"