With current recipe formatting CMDLINE variable contains
many unnecessary white spaces. This patch allow to drop
unnecessary spaces at the moment of writing them to
cmdline.txt. This will improve readability of cmdline.txt,
/proc/cmdline and dmesg output.
Signed-off-by: Bartłomiej Burdukiewicz <bartlomiej.burdukiewicz@gmail.com>
(cherry picked from commit f5fe02c30c)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
By default in case of CM4 IO board, the USB ports (header + built-in)
are disabled. In order to enable them the DWC2 mode needs to be set to
host.
Signed-off-by: Aurelian Zanoschi <aurelian17@gmail.com>
(cherry picked from commit 7193857284)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
* instead of repeating //config.txt
so many times, to make it a bit less error prone (as shown in previous commit)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
(cherry picked from commit 17eb1a2f00)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
It seems like "start_x=1" needs to be earlier in the file to work properly on the Rapberry Pi 4 B.
Fixes: #670
Signed-off-by: SCVready <alejandro.solozabal@outlook.com>
(cherry picked from commit 74deec51de)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
The name `bootfiles` is too generic, we should use `rpi-bootfiles`
instead.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
(cherry picked from commit ba3a417fbb)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
This variable is set in rpi-base.inc and referenced by other recipes
which need to know the location of the bootfiles. If this is overridden
for any reason we need to ensure that the bootfiles recipe deploys to
the correct path.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
(cherry picked from commit b8440b3d26)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Instead of generating cmdline.txt in the kernel recipe, it is generated
in a standalone recipe and pulled in as a dependency of the bootfiles
recipe. This simplifies the process of using a linux-yocto,
linux-mainline or similiar kernel recipe instead of linux-raspberrypi.
In the rpi-cmdline recipe the command line is built from fragments which
can all be easily overridden. The variables `SERIAL` and `CMA` are
renamed to `CMDLINE_SERIAL` and `CMDLINE_CMA` for consistency. The
cmdline.txt file is created in the do_compile step to allow further
customisation via do_compile_append if needed.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
(cherry picked from commit 8827040d9c)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Let's inherit kernel-arch and use ${UBOOT_ARCH} to replace the
hard-coded 'arm'.
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
(cherry picked from commit 26a888d669)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
it uses assembly files .S which needs to be processed with gcc alone
until they are made portable use gcc
Fixes
| armstub7.S:175:2: error: instruction requires: thumb
| cbz r6, 9f @ Skip this section if we are core 0
| ^
Signed-off-by: Khem Raj <raj.khem@gmail.com>
(cherry picked from commit 5db97b41a8)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
Added imx219.dtbo file in the overlays, and added dtoverlay in
/boot/config.txt define based.
To enable Sony Raspberry pi camera imx219 sensor, need to set
the variable RASPBERRYPI_CAMERA_V2 as 1.
In future, we can add any camera overlays here to support and
use them with libcamera.
Signed-off-by: Madhavan Krishnan <madhavan.krishnan@linaro.org>
(cherry picked from commit b70c7b9021)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
With stock u-boot v2020.01 which we use from poky CM3 module won't boot.
We need to apply this patch in order to have platform again working.
Add it only for cm3 to not break anything else.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
The raspberry pi 4 variant has a BCM2711 chip, however it still
uses the same boot files as the BCM2835 used in previous generations.
This change generalizes the naming of the directory generated in the
$DEPLOY_DIR to avoid the implication that the files are only
meant for the BCM2835.
Signed-off-by: Jeff Ithier <ithijme@gmail.com>
Current configuration (16MHz) is made for the PiCAN2 board that uses 16MHz crystal. This setting allows for use of Waveshare RS485 CAN HAT that has 8MHz crystal soldered (although according to Waveshare there is also a 12MHz crystal version of the board).
Signed-off-by: Jakub Luzny <jakub@luzny.cz>
The u-boot-env is provided by u-boot recipe and not by libubootenv, so
right recipe to append is the u-boot.
Adding the rpi-u-boot-scr in DEPENDS variable is wrong because it is
forcing rpi-u-boot-scr to be a dependency, but it'll fail if I have
another recipe that provides bootscript, once both recipes provide the
same file. The default value of u-boot-default-script is rpi-u-boot-scr,
so right way is to use u-boot-default-script and change the
PREFERRED_PROVIDER_u-boot-default-script if needed.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Currently ENABLE_CAN adds mcp2525-can0 to the dtoverlay.
ENABLE_DUAL_CAN was added to also add mcp2515-can1 to the dtoverlay.
This will allow a user to enable dual CAN when using a hat like the
PiCAN 2 Duo board.
Signed-off-by: Colin McAllister <colinmca242@gmail.com>
Add fw_env.config that uses at run-time /boot/uboot.env generated
through the boot scripts (specifically boot.cmd.in) from recipe
rpi-u-boot-scr. This configuration file is required to
successfully run fw_printenv from the user space.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Modify boot.cmd.in from recipe rpi-u-boot-scr to create uboot.env
in the /boot partition when using U-Boot. This change is required
to successfully run fw_printenv from the user space.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Users who want infrared device tree overlays gpio-ir and
gpio-ir-tx to be set in config.txt can now easily do it through
variable ENABLE_IR, for example in local.conf:
ENABLE_IR = "1"
By default the GPIO pin for gpio-ir is set to 18 and the pin for
gpio-ir-tx is 17. Both pins can be easily changed by modifying
variables GPIO_IR and GPIO_IR_TX (for example in local.conf).
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add u-boot-default-script to the PROVIDES variable to make easier to
replace boot script in another layer just by changing
PREFERRED_PROVIDER_u-boot-default-script variable. Set rpi-u-boot-scr as
the default provider for meta-raspberrypi.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Add support for the Adafruit PiTFT Plus 320x240 2.8" TFT with
Capacitive Touchscreen, using the same patterns used for the other
versions of the PiTFT screens.
Signed-off-by: Erik Botö <erik.boto@gmail.com>
All source files in the armstubs directory have a 3-clause BSD license.
The Makefile doesn't appear to use any files from outside this directory
during the build.
Signed-off-by: Paul Barker <paul@betafive.co.uk>
Intuitively, bcm2835-bootfiles:do_deploy should depend on rpi-config:do_deploy.
This indirectly resolves a missing dep between rpi-config:do_deploy and
do_image_rpi_sdimg (on an image recipe inheriting from sdcard_image-rpi.bbclass).
This manifested as changes to rpi-config (e.g. setting or unsetting
ENABLE_* variables) not triggering a rebuild of the SD card image.
Signed-off-by: Chris Laplante <mostthingsweb@gmail.com>
Mike Looijmans
Bartłomiej Burdukiewicz
Martin Jansa
Aurelian Zanoschi
SCVready
Paul Barker
Ming Liu
Khem Raj
Madhavan Krishnan
Marek Belisko
Pierre-Jean Texier
Jeff Ithier
Jakub Luzny
Fabio Berton
colin
Leon Anavi
Erik Botö
Andrei Gherzan
Paul Barker
Patrick Vacek
Chris Laplante