Currently, we are installing the rpi custom txt and fw files whenever
the meta-raspberrypi layer is included in bblayers.conf. This breaks
other machines that need to use the bcm43430 drivers but with alternate
txt or fw files.
Install these files only when "rpi" is in MACHINEOVERRIDES.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
The kernel class is now using $KERNEL_PACKAGE_NAME to set the default
kernel package name in order to allow alternate kernel flavors.
This fixes the following bitbake warning:
Variable key RDEPENDS_${KERNEL_PACKAGE_NAME}-base (${KERNEL_PACKAGE_NAME}-image) replaces original key RDEPENDS_kernel-base ().
Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
This makes the defconfig more consistent with the RPi 3 and
CONFIG_OF_EMBED is needed to get the RPi firmware provided
DTB to function.
Signed-off-by: Drew Moseley <drew.moseley@northern.tech>
Added patch status information in patch header, and re-word of commit
message
Signed-off-by: Mirza Krak <mirza.krak@endian.se>
Sphinx will use the 'alabaster' theme by default when building locally. However,
Read the Docs will use their own theme by default which suits their site better.
By not specifying html_theme we allow both targets to use the appropriate
default theme.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
The variable RPI_EXTRA_CONFIG can be set in local.conf to append text to the
Raspberry Pi config.txt file as described in the documentation.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
* As we now use GitHub for development we should point users at this repo.
* Layer documentation is now published on Read the Docs.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
* KERNEL_DEFCONFIG variable isn't used anywhere since this commit:
https://github.com/agherzan/meta-raspberrypi/commit/88478c38744e6a57361b438095fee1d808690a00
* it was replaced with KBUILD_DEFCONFIG:
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi0-wifi ?= "bcmrpi_defconfig"
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi ?= "bcmrpi_defconfig"
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi2 ?= "bcm2709_defconfig"
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi3 ?= "bcm2709_defconfig"
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi3-64 ?= "bcmrpi3_defconfig"
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
We can't just override KERNEL_IMAGETYPE in machine-specific conf files without
breaking the implementation of RPI_USE_U_BOOT. Instead we need to define a new
KERNEL_IMAGETYPE_DIRECT variable which will control the value when u-boot is not
in use. This new variable may then be overridden as needed without breaking our
u-boot support.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Fixes: 50fd319205 for raspberrypi3-64.
Fixes: #153
For raspberrypi3-64 set default kernel image to "Image".
"zImage" are not supported by arm64 platforms. And ".gz" images are not
handled by bootloader yet.
Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
We used to have this as the default but there was a bug at some point in the
firmware which didn't work with compressed kernel images. We switched to Image
and never changed it back even though that bug is long history.
In this way we will stop carrying 15M of a kernel image. 4M looks much better.
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
This used to work in the past because this machine was based on raspberrypi
one. Now that they are separate, we need a configuration for it too otherwise:
| common/arm/quant-a.S: Assembler messages:
| common/arm/quant-a.S:362: Error: selected processor does not support `rbit
r1,r1' in ARM mode
| common/arm/quant-a.S:363: Error: selected processor does not support `rbit
r1,r1' in ARM mode
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
userland package is the Raspberry Pi provider for the openGL stack.
If selected, it shall provide the gles2 and egl stacks in conjunction
with mesa-gl.
libegl was missing in the RPROVIDES variable, thus some run-time
dependencies were not met when using userland as provider.
Signed-off-by: Francesco Giancane <francescogiancane8@gmail.com>
rpi-backend.so was an attempt to create a specialized
weston backend to be used on raspberry pi like platforms.
At the moment, this backend's support has been dropped in favor
of using the standard drm backend, as the vc4 driver is now mainline
in mesa and in kernel (for kernel support).
As a result, weston on raspberry pi does not require the rpi-backend.so
anymore, nor it is buildable (weston's configure complains about
unrecognized configuration switch).
This patch enables weston to natively run on the DRM backend.
Signed-off-by: Francesco Giancane <francescogiancane8@gmail.com>
* this reverts commit 04b37dbdb7.
* this makes qtbase and everything which depends on some qt* recipe to
be effectivelly MACHINE_ARCH
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This allow for bbappend files to be enabled when specific layers are
included.
Change-Id: Iecbcf0de85a64aad71605b60ecd3d9a2586fae85
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
We need to ensure that the bootloader and firmware files are present in the
deploy directory before creating wic images.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
The timestamp in the rootfs partition image filename may not match the current
timestamp if the do_image_rpi_sdimg step is repeated without repeating the
previous do_image_ext3 (or similar) step.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
These commands are unnecessary and seem to mask failures to find the rootfs.ext3
file when re-running the do_image_rpi_sdimg stage without re-running the
preceeding do_image_ext3 stage.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
For raspberrypi3-64 we need to use the Image or Image.gz format with u-boot
instead of the legacy uImage format. We also need to issue the 'booti' command
to boot the kernel instead of 'bootm'.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
There is no reason to continue supporting pre-4.8 series kernels so we can move
the setting of LOADADDR to the common inc file.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
There is no need to have 2 separate inc files any more and the existing code has
several duplications.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Hugo Hromic
Andrei Gherzan
Andrea Galbusera
Martin Kelly
Ricardo Salveti
Drew Moseley
Mirza Krak
Paul Barker
Martin Jansa
Khem Raj
Loys Ollivier
Francesco Giancane
Michael Gloff
Otavio Salvador