Remove the following unused patches:
1. 0002-Don-t-try-to-acquire-buffer-when-src-pad-isn-t-activ.patch
2. 0003-fix-decoder-flushing.patch
Signed-off-by: Maxin B. John <maxin.john@intel.com>
A previous patch changed the BT serial device to the alias, but did not
update the device dependency resulting in the service failing to start
on boot.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
While wic is not a standard image, adding it to IMAGE_FSTYPES in
local.conf will fail unless a WKS_FILE is provided.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Recently wic was modified to no longer exclude /boot from partitions
added to fstab. The --on parameter in many kickstart specifications
insufficiently resolved the MMC device, resulting in attempts to mount
/dev/mmcblkp1 as boot when the device should be /dev/mmcblk0p1.
With systemd the mount failure is an error and the system drops into
emergency mode.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
If rpi-basic-image is based on rpi-hwup-image, both deprecation warnings are
printed which may be confusing. Therefore let's just copy over the relevant bits
of rpi-hwup-image for now.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
There hasn't been a tagged version of the firmware lately, but there have been
several bugfixes listed in the commit history and we're about to move to v4.14.y
as the default kernel so let's get up-to-date.
The actual commit used is the most recent change to the firmware files as of
2018-02-26, the most recent commits which only change the kernel image and other
files we don't use are ignored.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
As discussed on the issue tracker, it's confusing for meta-raspberrypi to have
its own set of image names filling the same jobs as the core images. Therefore
we are marking these images as deprecated and will be removing them in the
future. The recommended replacement images are as follows:
rpi-hwup-image -> core-image-minimal
rpi-basic-image -> core-image-base
The image 'rpi-test-image' will be kept and is not marked as deprecated, it is
still useful for testing. It it updated to be based on 'core-image-base'.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
The dependency resolution code in bitbake has recently been optimized and this
seems to have slightly changed the behaviour of do_image_rpi_sdimg and
do_image_wic. We ensure that the main build artifacts are present by depending
on the relevant do_deploy and do_populate_sysroot tasks. However, we need to
ensure that other build tasks for these dependencies have also been executed
before we try to create our image. This can be achieved by adding a recursive
dependency on do_build, so that the do_build tasks of all recipes in the
dependency chain of do_image_rpi_sdimg/do_image_wic are executed before the
image function itself is executed.
The original issue seen here was that 'recipedata' files were not copied to
'tmp/deploy/licenses' as do_populate_lic for each dependency had not been ran
before the image creation function. The write_deploy_manifest function from
license.bbclass (listed in IMAGE_POSTPROCESS_COMMAND) therefore failed. Adding
the recursive dependency on do_build fixes this issue, ensuring do_populate_lic
runs before do_image_rpi_sdimg/do_image_wic.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
This makes the defconfig more consistent with the RPi 3 and
CONFIG_OF_EMBED is needed to get the RPi firmware provided
DTB to function.
Recently removed by:
a50e19695f u-boot: drop upstreamed patches in v2018.01
however this change missed the cutoff for v2018.01
Signed-off-by: Drew Moseley <drew.moseley@northern.tech>
Add patch to allow multiple wayland clients per process
userland has limit of one wayland client per process and thereby allow compositors
to launch multiple wayland client apps
Signed-off-by: Jeff Wannamaker <jeff_wannamaker@cable.comcast.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
* samba depends on libpam and it might be useful to disable support
for it in DISTROs without pam in DISTRO_FEATURES
* disable it by default
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Currently, building linux-raspberrypi with "devtool build" breaks
because ${B}.config doesn't yet exist when do_configure_prepend runs.
Fix this by taking some logic from kernel.bbclass do_configure to populate
${B}.config before do_configure_prepend.
The full explanation for why this is necessary is fairly complex:
- In devtool builds, externalsrc.bbclass gets inherited and sets a list of
SRCTREECOVEREDTASKS, which don't get run because they affect the source tree
and, when using devtool, we want the developer's changes to be the single
source of truth. kernel-yocto.bbclass adds do_kernel_configme to
SRCTREECOVEREDTASKS, so it doesn't run in a devtool build., In a normal
non-devtool build, do_kernel_configme creates ${B}.config.
- Normally (e.g. in linux-yocto), it would be OK that do_kernel_configme
doesn't run, because the first few lines of do_configure in kernel.bbclass
populate ${B}.config from either ${S}.config (if it exists) for custom
developer changes, or otherwise from ${WORDIR}/defconfig.
- In linux-raspberrypi, we add do_configure_prepend, which tweaks
${B}.config. Since this runs *before* the kernel.bbclass do_configure,
${B}.config doesn't yet exist and we hit an error. Thus we need to move
the logic from do_configure up to before our do_configure_prepend. Because
we are copying only a portion of do_configure and not the whole thing,
there is no clean way to do it using OE functionality, so we just
copy-and-paste.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
This command is done (with more correct flags) in kernel.bbclass's
kernel_do_configure. Since we inherit that and prepend to it, we don't
need to run it ourselves, as we end up just running it twice.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
Currently, we are installing the rpi custom txt and fw files whenever
the meta-raspberrypi layer is included in bblayers.conf. This breaks
other machines that need to use the bcm43430 drivers but with alternate
txt or fw files.
Install these files only when "rpi" is in MACHINEOVERRIDES.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
The kernel class is now using $KERNEL_PACKAGE_NAME to set the default
kernel package name in order to allow alternate kernel flavors.
This fixes the following bitbake warning:
Variable key RDEPENDS_${KERNEL_PACKAGE_NAME}-base (${KERNEL_PACKAGE_NAME}-image) replaces original key RDEPENDS_kernel-base ().
Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
This makes the defconfig more consistent with the RPi 3 and
CONFIG_OF_EMBED is needed to get the RPi firmware provided
DTB to function.
Signed-off-by: Drew Moseley <drew.moseley@northern.tech>
Added patch status information in patch header, and re-word of commit
message
Signed-off-by: Mirza Krak <mirza.krak@endian.se>
Sphinx will use the 'alabaster' theme by default when building locally. However,
Read the Docs will use their own theme by default which suits their site better.
By not specifying html_theme we allow both targets to use the appropriate
default theme.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
The variable RPI_EXTRA_CONFIG can be set in local.conf to append text to the
Raspberry Pi config.txt file as described in the documentation.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
* As we now use GitHub for development we should point users at this repo.
* Layer documentation is now published on Read the Docs.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
* KERNEL_DEFCONFIG variable isn't used anywhere since this commit:
https://github.com/agherzan/meta-raspberrypi/commit/88478c38744e6a57361b438095fee1d808690a00
* it was replaced with KBUILD_DEFCONFIG:
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi0-wifi ?= "bcmrpi_defconfig"
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi ?= "bcmrpi_defconfig"
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi2 ?= "bcm2709_defconfig"
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi3 ?= "bcm2709_defconfig"
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi3-64 ?= "bcmrpi3_defconfig"
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
We can't just override KERNEL_IMAGETYPE in machine-specific conf files without
breaking the implementation of RPI_USE_U_BOOT. Instead we need to define a new
KERNEL_IMAGETYPE_DIRECT variable which will control the value when u-boot is not
in use. This new variable may then be overridden as needed without breaking our
u-boot support.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Fixes: 50fd319205 for raspberrypi3-64.
Fixes: #153
For raspberrypi3-64 set default kernel image to "Image".
"zImage" are not supported by arm64 platforms. And ".gz" images are not
handled by bootloader yet.
Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
We used to have this as the default but there was a bug at some point in the
firmware which didn't work with compressed kernel images. We switched to Image
and never changed it back even though that bug is long history.
In this way we will stop carrying 15M of a kernel image. 4M looks much better.
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
Khem Raj
Maxin B. John
Peter A. Bigot
Paul Barker
Drew Moseley
Hugo Hromic
Jeff Wannamaker
Martin Jansa
Martin Kelly
Andrei Gherzan
Andrea Galbusera
Ricardo Salveti
Mirza Krak
Loys Ollivier