mirror of
https://git.yoctoproject.org/meta-raspberrypi
synced 2026-06-04 14:09:51 +00:00
Martin Jansa
b422a0ae50
* fixes: | LINK /OE/build/oe-core/tmp-glibc/work/raspberrypi4-oe-linux-gnueabi/perf/1.0-r9/perf-1.0/perf | /OE/build/oe-core/tmp-glibc/work/raspberrypi4-oe-linux-gnueabi/perf/1.0-r9/perf-1.0/libperf.a(libperf-in.o):srcline.c:function find_address_in_section: error: undefined reference to 'bfd_get_section_flags' | /OE/build/oe-core/tmp-glibc/work/raspberrypi4-oe-linux-gnueabi/perf/1.0-r9/perf-1.0/libperf.a(libperf-in.o):srcline.c:function find_address_in_section: error: undefined reference to 'bfd_get_section_vma' | /OE/build/oe-core/tmp-glibc/work/raspberrypi4-oe-linux-gnueabi/perf/1.0-r9/perf-1.0/libperf.a(libperf-in.o):srcline.c:function find_address_in_section: error: undefined reference to 'bfd_get_section_size' | collect2: error: ld returned 1 exit status | make[2]: *** [Makefile.perf:519: /OE/build/oe-core/tmp-glibc/work/raspberrypi4-oe-linux-gnueabi/perf/1.0-r9/perf-1.0/perf] Error 1 | make[1]: *** [Makefile.perf:206: sub-make] Error 2 | make: *** [Makefile:70: all] Error 2 | make: Leaving directory '/OE/build/oe-core/tmp-glibc/work/raspberrypi4-oe-linux-gnueabi/perf/1.0-r9/perf-1.0/tools/perf' | WARNING: exit code 1 from a shell command. Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
meta-raspberrypi
Yocto BSP layer for the Raspberry Pi boards - http://www.raspberrypi.org/.
Quick links
- Git repository web frontend: https://github.com/agherzan/meta-raspberrypi
- Mailing list (yocto mailing list): yocto@yoctoproject.org
- Issues management (Github Issues): https://github.com/agherzan/meta-raspberrypi/issues
- Documentation: http://meta-raspberrypi.readthedocs.io/en/latest/
Description
This is the general hardware specific BSP overlay for the RaspberryPi device.
More information can be found at: http://www.raspberrypi.org/ (Official Site)
The core BSP part of meta-raspberrypi should work with different OpenEmbedded/Yocto distributions and layer stacks, such as:
- Distro-less (only with OE-Core).
- Angstrom.
- Yocto/Poky (main focus of testing).
Dependencies
This layer depends on:
-
URI: git://git.yoctoproject.org/poky
- branch: master
- revision: HEAD
-
URI: git://git.openembedded.org/meta-openembedded
- layers: meta-oe, meta-multimedia, meta-networking, meta-python
- branch: master
- revision: HEAD
Quick Start
- source poky/oe-init-build-env rpi-build
- Add this layer to bblayers.conf and the dependencies above
- Set MACHINE in local.conf to one of the supported boards
- bitbake core-image-base
- dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used)
- Boot your RPI.
Quick Start with kas
- Install kas build tool from PyPi (sudo pip3 install kas)
- kas build meta-raspberrypi/kas-poky-rpi.yml
- dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used)
- Boot your RPI.
To adjust the build configuration with specific options (I2C, SPI, ...), simply add a section as follows:
local_conf_header:
rpi-specific: |
ENABLE_I2C = "1"
RPI_EXTRA_CONFIG = "dtoverlay=pi3-disable-bt"
To configure the machine, you have to update the machine variable.
And the same for the distro.
For further information, you can read more at https://kas.readthedocs.io/en/1.0/index.html
Maintainers
- Andrei Gherzan
<andrei at gherzan.ro>