Leon Anavi
c482e2cc7c
Users who want infrared device tree overlays gpio-ir and gpio-ir-tx to be set in config.txt can now easily do it through variable ENABLE_IR, for example in local.conf: ENABLE_IR = "1" By default the GPIO pin for gpio-ir is set to 18 and the pin for gpio-ir-tx is 17. Both pins can be easily changed by modifying variables GPIO_IR and GPIO_IR_TX (for example in local.conf). Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
meta-raspberrypi
Yocto BSP layer for the Raspberry Pi boards - http://www.raspberrypi.org/.
Quick links
- Git repository web frontend: https://github.com/agherzan/meta-raspberrypi
- Mailing list (yocto mailing list): yocto@yoctoproject.org
- Issues management (Github Issues): https://github.com/agherzan/meta-raspberrypi/issues
- Documentation: http://meta-raspberrypi.readthedocs.io/en/latest/
Description
This is the general hardware specific BSP overlay for the RaspberryPi device.
More information can be found at: http://www.raspberrypi.org/ (Official Site)
The core BSP part of meta-raspberrypi should work with different OpenEmbedded/Yocto distributions and layer stacks, such as:
- Distro-less (only with OE-Core).
- Angstrom.
- Yocto/Poky (main focus of testing).
Dependencies
This layer depends on:
-
URI: git://git.yoctoproject.org/poky
- branch: master
- revision: HEAD
-
URI: git://git.openembedded.org/meta-openembedded
- layers: meta-oe, meta-multimedia, meta-networking, meta-python
- branch: master
- revision: HEAD
Quick Start
- source poky/oe-init-build-env rpi-build
- Add this layer to bblayers.conf and the dependencies above
- Set MACHINE in local.conf to one of the supported boards
- bitbake core-image-base
- Use bmaptool to copy the generated .wic.bz2 file to the SD card
- Boot your RPI
Quick Start with kas
- Install kas build tool from PyPi (sudo pip3 install kas)
- kas build meta-raspberrypi/kas-poky-rpi.yml
- Use bmaptool to copy the generated .wic.bz2 file to the SD card
- Boot your RPI
To adjust the build configuration with specific options (I2C, SPI, ...), simply add a section as follows:
local_conf_header:
rpi-specific: |
ENABLE_I2C = "1"
RPI_EXTRA_CONFIG = "dtoverlay=pi3-disable-bt"
To configure the machine, you have to update the machine variable.
And the same for the distro.
For further information, you can read more at https://kas.readthedocs.io/en/1.0/index.html
Maintainers
- Andrei Gherzan
<andrei at gherzan.ro>