RM_WORK_EXCLUDE was used as a workaround for sourceipk in Arago, which
is long since gone.
Signed-off-by: Denys Dmytriyenko (TI) <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Set additional LAYERRECOMMENDS for dynamic layers.
Signed-off-by: Denys Dmytriyenko (TI) <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Set meta-ti-test layer to explicitly depend on meta-ti-bsp for ti-soc
definition.
Signed-off-by: Denys Dmytriyenko (TI) <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
As discussed on the mailing list, it is not always safe to have a
version-agnostic bbappend, as there could be different versions
of weston recipe provided by downstream layers, not compatible
with our patch, resulting in breakage. Make our bbappend again
version-specific.
Signed-off-by: Denys Dmytriyenko (TI) <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
When I rebased before moving from meta-arago to meta-ti, I accidentally
removed the wrong patch. Net result was this orphaned patch was left
and imported incorrectly. Remove it.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are moving the meta-arago-test layer to meta-ti-test. This commit
imports all check_yocto_rules from meta-arago-test.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are moving the meta-arago-test layer to meta-ti-test. This commit
imports the ti-test packagegroup that uses all of the previous commits..
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are moving the meta-arago-test layer to meta-ti-test. This commit
imports all of the recipes under dynamic-layers.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are moving the meta-arago-test layer to meta-ti-test. This commit
imports all of the recipes under recipes-support.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are moving the meta-arago-test layer to meta-ti-test. This commit
imports all of the recipes under recipes-kernel.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are moving the meta-arago-test layer to meta-ti-test. This commit
imports all of the recipes under recipes-graphics.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are moving the meta-arago-test layer to meta-ti-test. This commit
imports all of the recipes under recipes-extende.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are moving the meta-arago-test layer to meta-ti-test. This commit
imports all of the recipes under recipes-devtools.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are moving the meta-arago-test layer to meta-ti-test. This commit
imports all of the recipes under recipes-connectivity.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are moving the meta-arago-test layer to meta-ti-test. This commit
imports all of the recipes under recipes-bsp.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are moving the meta-arago-test layer to meta-ti-test. This commit
imports all of the recipes under recipes-benchmark.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are moving the meta-arago-test layer to meta-ti-test. This is the
first commit that creates the layer directory structure. Follow on
patches will import all of the various recipes.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The board specific firmware is added in the generic AM69 SoC include
instead of the AM69-SK board configuration. This follows the changes
already made for the J784s4 SoC and EVM board in
commit 27615406 ("conf: machine: j784s4: Move ti-eth-fw-j784s4 to EVM conf")
Move the machine-essential recommend from the SoC include
to the AM69-SK configuration.
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The am62lxx SoC default UART is ttyS0 since it doesn't have the
R5 cores taking up a UART. The k3 default SERIAL_CONSOLES
inherited includes ttyS2, which causes systemd to wait indefinitely
for a console that never appears, significantly increasing boot time
and degrading user experience.
Override SERIAL_CONSOLES to specify only ttyS0, allowing the boot
process to proceed normally without waiting for unavailable consoles.
Signed-off-by: Yogesh Hegde <y-hegde@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
It was pointed out that j722s-evm-k3r5 was incorrectly setup and would
not build correctly out of the box. This is due to the fact that we set
both UBOOT_MACHINE and UBOOT_CONFIG by default. This was a mistake.
While looking into this newish feature I also found that another
platform was using a prepend, when it really should just be setting the
value for tie-test-builds.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The `ti-eth-fw-j784s4` firmware is added in the generic J784s4 SoC
include, which is therefore used for all the J784s4-based machines.
That firmware seems to be developed specifically for the EVM, as it
takes control of pins used for the Ethernet board setup on the EVM. On
non-EVM boards, like the Aquila-AM69, those signals are used for other
functions, so enabling the firmware in the SoC include is too broad
and breaks functionality.
Move the machine-essential recommend from the SoC include
to the EVM configuration.
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The ordering of parameters in SERIAL_CONSOLES matters. The first value
is picked as the KERNEL_CONSOLE and used as the console definition for
grub as of:
9dc647e5 (k3: set console parameter to KERNEL_CONSOLE, 2026-03-18)
Ideally this will be split out into a separate board configuration
parameter in the future, as there are already some board specific
overrides right now.
Signed-off-by: Randolph Sapp <rs@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This patch modifies the load addresses for the kernel fitImage to
provide out-of-box support for 128MiB DDR sizes on AM62l.
The current fitImage uses 0x88000000 as the DTB load address which is
beyond the 128MiB boundary while the kernel load address of 0x82000000
conflicts with U-Boot's SPL load address which causes problems when
enabling falcon mode on the device.
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add BBFILES_DYNAMIC registration for 'tpm-layer' collection to
conditionally include LUKS recipes from dynamic-layers/tpm-layer/
when meta-security/meta-tpm layer is present.
Add tpm-layer to LAYERRECOMMENDS to document the optional
dependency for LUKS functionality.
Update ti-core-initramfs.inc to auto-enable initramfs generation
when DISTRO_FEATURES contains 'luks'.
Signed-off-by: Shiva Tripathi <s-tripathi1@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add initramfs module to dynamic-layers/tpm-layer providing LUKS2 full
disk encryption with TPM-sealed keys for TI K3 platforms. Keys are
sealed by firmware TPM (fTPM) running in OP-TEE and stored in eMMC
RPMB.
Features:
- First-boot in-place encryption with tpm2_getrandom key generation
- TPM-sealed key storage via persistent handle 0x81080001
- Automatic unlock on subsequent boots
- Space verification ensuring 32MB available for LUKS header
The module is built only when meta-tpm layer is present and gets
included in initramfs only when DISTRO_FEATURES='luks' and
MACHINE_FEATURES='optee-ftpm'
LUKS packages (cryptsetup, tpm2-tools, tpm2-tss, optee-ftpm,
e2fsprogs-*) significantly increase initramfs size beyond the default
131072 limit. Increase INITRAMFS_MAXSIZE to 200000 to accommodate
these packages.
Signed-off-by: Shiva Tripathi <s-tripathi1@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add kernel configuration fragment enabling dm-crypt and crypto
algorithms required for LUKS2 full disk encryption. Config is
applied when DISTRO_FEATURES contains 'luks'.
Includes ARM64 crypto optimizations and fTPM support.
Signed-off-by: Shiva Tripathi <s-tripathi1@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The mkfs.ubifs tool was failing with "max_leb_cnt too low (10077 needed)"
error when building tisdk-default-image for am62lxx-evm-rt. Increased
the -c parameter in MKUBIFS_ARGS from 8500 to 12000 to accommodate the
larger filesystem size requirement.
Signed-off-by: Pratham Deshmukh <p-deshmukh@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Set the default value of TI_WKS_BOOTLOADER_APPEND to
"console=${KERNEL_CONSOLE}" to populate the kernel cmdline console
variable for all k3 devices.
Also define SERIAL_CONSOLES for am64xx.inc, since it was previously
overriding TI_WKS_BOOTLOADER_APPEND directly for this functionality.
The KERNEL_CONSOLE variable provided by openembedded-core is a sane
default console parameter automatically populated by the first value in
the SERIAL_CONSOLES variable. Their UKI and EFI flows already use this
variable to ensure the kernel cmdline console value is set to something
machine appropriate.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Package k3-am62x-sk-ecap-capture.dtbo for AM62 LP SK to
enable ECAP in capture mode.
Signed-off-by: Judith Mendez <jm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There have been changes in k3-am62x* overlays due to conflicts
in DT, so update KERNEL_DEVICETREE_PREFIX for AM62A SK appropriately.
Signed-off-by: Judith Mendez <jm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update SRCREV for Jailhouse-enabled U-Boot and Linux kernel
and ti-jailhouse for the bsp-ti-6_18
Changes include:
- u-boot/ti-extras.inc: Update to latest SRCREV
- linux/ti-extras.inc: Update to latest SRCREV
- linux/ti-extras-rt.inc: Update to latest SRCREV
- jailhouse/ti-jailhouse: Update to latest SRCREV
Signed-off-by: Mahammed Sadik Shaik <s-sadik@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
LCPD Automation Script
Denys Dmytriyenko (TI)
Ryan Eatmon
Franz Schnyder
Yogesh Hegde
Antonios Christidis
Randolph Sapp
Anshul Dalal
Shiva Tripathi
Mahammed Sadik Shaik
Pratham Deshmukh
Judith Mendez
Leon Anavi