Currently, the overlay mentioned in KERNEL_DEVICETREE_PREFIX in case
of j722s is "k3-j7200-evm-mcspi-loopback" which is incorrect. Change
the overlay to "k3-am625-sk-mcspi-loopback.dtso" in order to carry
out SPI loopback tests successfully.
Fixes: 13b691a9bc ("conf: machine: j722s: Add overlay to
KERNEL_DEVICETREE_PREFIX")
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the bb_org-6.6 bsp provider to pick the correct version of
mesa-pvr. This probably should have be a part of the previous patch
switching ti bsp logic as well.
Fixes: 0be0a5f6 (ti-bsp: select the graphics 24.2 packages, 2025-01-22)
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the source revision to allow this module to work on kernel 6.12.
Originally this was going to be a separate branch, but considering the
bsp selector logic, this makes just as much sense.
Also enable the sgx driver in the ti_6.12 bsp selector.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add logic to generate UBI filesystem images which can be used to directly
flash into the NAND’s file-system partition.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump up SRCREV of optee-os to ef1ebdc23034a804a72da2207f1a825ce96a1464
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This reverts commit eeb68bcae3.
This patch was accepted to the ti-u-boot repo, so this patch is no
longer needed.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the overlay "k3-j7200-evm-mcspi-loopback.dtso" to the j722s
configuration so that SPI loopback tests can be carried out
successfully.
Signed-off-by: Anurag Dutta <a-dutta@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Relocate the patches for 22.3.5 to the mesa-pvr-22.3.5 subdirectory so
it's more clear what version of mesa they apply to.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
No reason to do this pre install now that my python function can
evaluate file paths. Also, this may have been causing issues with state
when attempting to switch between opencl enabled/disabled builds.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Since this is new logic is in place, switch the k6.6 and k6.12 configs
to use these new libraries. Do not enable GFX on 6.12 just yet. Still
need some kernel patches on the SGX side.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The gfx library provided by rogue can support this never version of mesa
out of the box. Pull it in now that we have ported the SGX side of
things.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the package version for DDK 24.2, this includes a few fixups from
IMG and support for a newer version of mesa.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
A recent patch to ti-u-boot 2025.01 introduces a compile error on
master for am64xx-evm. A patch has been sent to the mailing list
that fixes this, but it will take time before we will see that patch
available to us on master. So we need to carry the patch here.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
ti-linux-kernel tree has several prune config fragments for ARM/ARM64/RT
configurations. Enable the prune config fragments here.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
All current K3 devices use either A53 or A72. Use the compile tune
configuration specific for these to allow the compiler to make
better optimizations.
Default tune here is weakly set to a lowest common denominator of
aarch64, as before, which is a recommended behavior for a BSP layer.
This allows for greater binary reuse (packages, sstate, etc.) across
different platforms of the same architecture in multi-BSP environments.
At the same time, since all the correct tunes are now configured for
K3 devices, one can elevate compiler optimization levels either from
local.conf or own Distro configuration on a per-SoC or per-device
basis, like so:
DEFAULTTUNE:k3 = "armv8a-crc"
DEFAULTTUNE:j721e = "cortexa72-cortexa53"
DEFAULTTUNE:beagleplay = "cortexa72-cortexa53"
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
There were some errors related to ipk postinst. The issues were fixed
by going to the update-alternatives class instead of trying to create
the steps directly in the recipe.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The ti-cgt-arm compiler is a custom TI compiler. It does not
currently support reproducible builds and is provided via a
binary blob download that we cannot patch in the recipe to
address the issue.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update SRCREV to pick up patch that fixes some compile errors:
../git/memplugin_linux.c: In function 'memplugin_alloc':
../git/memplugin_linux.c:69:9: error: implicit declaration of function 'dsp_dce_buf_lock' [-Wimplicit-function-declaration]
69 | dsp_dce_buf_lock(1, &(h->dma_buf_fd));
| ^~~~~~~~~~~~~~~~
../git/memplugin_linux.c:71:9: error: implicit declaration of function 'dce_buf_lock' [-Wimplicit-function-declaration]
71 | dce_buf_lock(1, &(h->dma_buf_fd));
| ^~~~~~~~~~~~
../git/memplugin_linux.c: In function 'memplugin_free':
../git/memplugin_linux.c:91:17: error: implicit declaration of function 'dsp_dce_buf_unlock' [-Wimplicit-function-declaration]
91 | dsp_dce_buf_unlock(1, &(h->dma_buf_fd));
| ^~~~~~~~~~~~~~~~~~
../git/memplugin_linux.c:93:17: error: implicit declaration of function 'dce_buf_unlock' [-Wimplicit-function-declaration]
93 | dce_buf_unlock(1, &(h->dma_buf_fd));
| ^~~~~~~~~~~~~~
../git/memplugin_linux.c:95:13: error: implicit declaration of function 'close'; did you mean 'pclose'? [-Wimplicit-function-declaration]
95 | close(h->dma_buf_fd);
| ^~~~~
| pclose
and
../git/libdce_linux.c: In function 'dce_deinit':
../git/libdce_linux.c:90:9: error: implicit declaration of function 'close'; did you mean 'pclose'? [-Wimplicit-function-declaration]
90 | close(OmapDrm_FD);
| ^~~~~
| pclose
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Like we do with GPU support, GC320 support is conditional on the
kernel we are building and so should be disabled here for kernels
on which it is not functional yet.
We can then remove these disabling lines as the driver is updated
for each supported kernel, instead of blanket disabling in the
distro layer as done currently.
Signed-off-by: Andrew Davis <afd@ti.com>
This might have been useful for building development packages with
the pre-built binaries for deployment elsewhere, but there are
better ways to do this and these are no longer consumed. Remove
this packaging step.
Signed-off-by: Andrew Davis <afd@ti.com>
This might have been useful for building development packages with
the pre-built binaries for deployment elsewhere, but there are
better ways to do this and these are no longer consumed. Remove
this packaging step.
Signed-off-by: Andrew Davis <afd@ti.com>
This was used when the kernel had a different configuration for
the testing kernel. This has not been the case since v5.10 so
drop the systest kernel package as it will be the same as the
normal kernel package now.
Signed-off-by: Andrew Davis <afd@ti.com>
We are moving to 6.12 to be our new LTS, so we are switching the default
BSP to that. You can still access the 6.6 kernel if you need to by using
the BSP system and setting TI_PREFERRED_BSP = "ti-6_6" in your
local.conf.
Current known issues:
- Hardware graphics is disabled until we get a patch that updates the
patches to work with the 6.12 kernel. Falling back to software
rendering.
- am62xxsip-evm and j742s2-evm are not supported in the 2025.01 u-boot
yet. They will fail to build until the u-boot recipe is updated to
point to a commit that fixes their support.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Rather than override the value for SPL_BINARY for all bsps, simply just
set the value to the correct value. This should be ok since all
beaglebone-ai64 variations should use tispl.bin_unsigned.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The defaults for UBOOT_MACHINE and SPL_BINARY are now aligned with the
mainline values and new ti-6_1 values for the previous defaults were
created to capture those. Also updated the meta-beagle beagleplay since
it inherits the beagleplay-ti settings.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The script that sends the automated patch does not currently handle
updating the KERNEL_REPRODUCIBILITY_PATCHES variable with the changes in
the patches.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Rogue graphics driver 24.1 currently fails to build against the kernel
that enables FORTIFY_SOURCE, such as bb.org. Disable this config for now,
until the driver is fixed.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Most Beagle platforms are switching to 6.6 based Linux kernel and U-boot
2024.10. Add corresponding recipes and extend beagle-bsp with required
settings.
BeagleY-AI for now remains on 6.1 BSP with U-boot 2023.04.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Rename "bb_org" BSP recipes to include version in the recipe names.
This way we can support multiple versions.
Also remove 2 unused kernel patches that were needed for 5.10
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Move "bb_org" kernel and U-boot providers that use corresponding official
BeagleBoard.org trees into own meta-beagle layer.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Extract "bb_org" BSP specific settings from beagleplay-ti in meta-ti-bsp and
move them to own beagleplay machine config in meta-beagle.
The differences between 2 configs are minimal, hence beagleplay in meta-beagle
inherits beagleplay-ti from meta-ti-bsp as a base and only adjusts what's
needed.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
OE-Core master has switched from lz4c to lz4 host tool, but a corresponding
change only appears in kernel 6.13. Since bb.org kernels 6.1 and 6.6 enable
LZ4 compression by default, also add a legacy lz4c tool in the list.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
The new meta-beagle will host all supported Beagle platforms that
use TI SoCs and hence need to depend on meta-ti-bsp. The default
BSP for the platforms in this layer will use BeagleBoard.org
official trees for the Linux kernel and U-boot.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
BeaglePlay is officially supported by TI "ti-6_6" BSP and is part
of the TI-SDK releases. Switching BSP to BeagleBoard.org "bb_org"
settings for the same machine is possible within the same layer.
But having different machine configs for the same machine name in
multiple layers can be confusing and prone to errors. Hence rename
the config to indicate BeaglePlay with official TI support in order
to re-use the canonical name in a separate layer.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
All other firmware recipes are in recipes-bsp. There is nothing much
special about this set of firmware so move it to match.
This firmware is the pre-compiled "echo test" example for various
remote cores. The directory name is not very clear on that, so fix
that up too.
Signed-off-by: Andrew Davis <afd@ti.com>
As the patch that added these states, this is an ugly hack, the issues
involved are fixed and no longer relevant, remove this.
Signed-off-by: Andrew Davis <afd@ti.com>
We use the makefile shipped with the firmware to deploy the firmware
instead of just manually moving it in the install step. But the makefile
doesn't do the right thing, so we also modify the makefile. Skip all
this and just move the firmware ourselves.
Signed-off-by: Andrew Davis <afd@ti.com>
