* Move repo to git.ti.com
* Bump PE due to versioning schema change
* Drop init scripts needed back in 3.8 days
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Previous patch introduced a typo, the correct name is am335x_boneblack_config.
Thanks to Diego Sueiro <diego.sueiro@gmail.com> for spotting it.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Using the am335x_boneblack configuration for u-boot allows to save the
environment to the emmc. Else, it is not possible to save the
environment at all.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Update SGX patching, as now being partially upstreamed to the kernel.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Mainline version of 2014.07 will be pushed to mainline OE-Core soon.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
* This machine config is based on dra7xx-evm.conf.
* However, due to differences in the boards a different serial console is used.
* Update port for the am57xx-evm (GP).
Signed-off-by: Franklin S. Cooper Jr <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* These binaries are for the DSP and the strip command in the
ARM compiler does not work on them. Without this the following
error is seen:
* ERROR: runstrip: ''arm-linux-gnueabihf-strip' --remove-section=.comment
--remove-section=.note '<PATH>/dra7-dsp1-fw-radio.xe66'' strip
command failed
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Update to use the dra7xx SOC_FAMILY instead of the specific
dra7xx-evm machine type.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Update the include file used to the dra7xx.inc file which
brings access to the dra7xx SOC_FAMILY
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Add the AM57xx machine type which is used to differentiate
between the AM57xx and the DRA7xx which are derivative devices
with different HW platforms and SoC capabilities.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Create the dra7xx.inc file which inherits the omap-a15.inc file
and then adds the dra7xx as another valid SOC_FAMILY setting.
* The addition of the dra7xx SOC_FAMILY is done while still keeping
access to the omap-a15 family. What this means is that omap-a15
can apply to omap5-evm, dra7xx-evm, and am57xx-evm. Then the
dra7xx family can be used to differentiate between omap5 and
dra7xx based devices.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Acked-by: Franklin Cooper Jr. <fcooper@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Leave 4.9 as the last release providing softfp binaries and x11 support.
Leave 4.5 for now as being widely used on legacy omap3 devices.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
The do_prepsources task runs after do_unpack at which point the
${S}/patches directory has been created. In the last step of
do_prepsources, code should be copied over to ${S} by the release.sh
script. However, this script silently fails if the target directory
(${S}) is not empty---it contains the 'patches' directory. The
failure manifests in the do_patch step when trying to applying patches
against the source which wasn't populated by release.sh.
Here, we pre-emptively clean out the directory release.sh intends to
use. The patch directory is re-created by the do_patch step.
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
A number of recipes in recipes-ti install more files than are
packaged causing lots of QA errors. We choose to ignore these.
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
This recipe use autotools and breaks when built out-of-tree
(${B} != ${S}).
Signed-off-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Critical fixes have been added to the ti-u-boot-2013.10 branch for AM4x.
* Update commit id to point to this new commit.
* For all other platforms nothing should have changed.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Remove old mainline u-boot versions since the latest version
has better support for TI platforms.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* The latest mainline u-boot works well for most TI devices and
we want to enable more people to use and test it. Adding
version 2014.07-rc3 will allow more people to build and use this
u-boot version
* Add a dependency on dtc-native since the latest mainline of u-boot
now requires this and not every build host will have the right
version.
Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Since sgx support is broken for newer kernels and Qt4, disable it for now
until Qt5 becomes default and kernel drivers are updated.
This reverts commit f9253dc88f.
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* It breaks libgles/SGX due to missing omafb/omafb.h header
* Will be switching to 3.14 instead for LTS
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Acked-by: Chase Maupin <chase.maupin@ti.com>
Denys Dmytriyenko
Alexandre Belloni
Franklin S. Cooper Jr
Maupin, Chase
Ash Charles
Cody P Schafer
Scott Ellis
Hao Zhang