The VIP camera capture driver recently ported to ti-linux-5.10.y adds
a DT overlay for the OV10635 camera sensor. Add this to
KERNEL_DEVICTREE so it's added to the artifacts.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We need to control both the source name of the firmware and
the target name, so split the current variable into two and
update the install command.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the ti-rpmsg-char library to 0.4.0 version that enables the
support for j721s2 SoC family remote processors.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are now using binman to generate the images for
K3 AM64 in u-boot.
tools/binman/binman needs python3-setuptools so add it to
DEPENDS.
Reported-by: Praneeth Bajjuri <praneeth@ti.com>
Suggested-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The original recipe listed the compatible platforms to
all of j7, but at this time it is limited to j721s2-evm.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This reverts commit d29025f7e8.
* associated fix in k3-image-gen is picked up now.
commit 892c86501ff7 ("Makefile: Skip signing of binaries for HS combined boot")
hence its no longer needed to carry the same fix from meta-ti here.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update ti-linux-firmware and k3-image-gen to
pick latest TIFS and DM v2022.01
This version also adds support to j721s2
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets fix the missing switch firmware binary to point to ping binary
instead. If we attempt to start alternate CPU, we get a very beserk
system.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add firmware recipe to add the Wave521cl firmware pieces in for j7
platform.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets keep ethernet switch firmware disabled till we can actually
integrate it.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Lets enumerate the C7x target instead of defaulting as a since C7x.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Actual systems may choose to use a different console from the default
Allow the machine configurations to describe the same. Since the
option provided is custom to TI K3, make this a k3 product override
capability.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Actual systems may choose to use a different console from the default
Allow the machine configurations to describe the same.
Since the option provided is custom to TI K3, make this a k3 product
override capability.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the srcrev to pick the latest of ti-img-sgx/1.17.4948957/k5.10.
commit eaa9fcd3acff ("km: support OpenEmbedded hardfp toolchain w/o -gnueabihf suffix")
is not picked up on the sdk-ddk-km repo already, hence removing the patch from here.
commit eda7780bfd52 ("Fix driver config for 5.10 kernel") fixes graphics
init failures on sgx platforms
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
commit ba0ddc5ae9 ("conf: am437xx-evm: Remove non-existent dtb* from
5.10") removed all non-existent dtb* for am437xx-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces following HDMI DTBs.
- am437x-gp-evm-hdmi.dtb
- am43x-epos-evm-hdmi.dtb
The required dts have been added to the 5.10LTS by these two following
commits:
- https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/arch/arm/
boot/dts/am437x-gp-evm-hdmi.dts?h=ti-linux-5.10.y&id=25434078d3f93d1346af5
e52e0f150f9083321d8
- https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/arch/arm/
boot/dts/am43x-epos-evm-hdmi.dts?h=ti-linux-5.10.y&id=c5114144b568e470a8f6
e613f7c6e8b88ad19d7e
Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This reverts commit d5db414172.
We should'nt have to carry patches for u-boot or kernel, since the
upstream is now fixed since 5.14 kernel and u-boot 2021.10 tag onwards,
lets revert the patch to allow upstream to work with 5.15+ kernel and
2021.10 u-boot (from the already applied commit cae609388f
"recipes-bsp: u-boot-ti-mainline: Update to v2021.10 release").
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
This adds up numerous fixes for various k3 platforms.
While at it, bump the ti-upstream-tools repo as this sync up gives us:
config: audio_display: Update cdns-mhdp configs
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
SA2UL GP driver will not work for HS. Need SA2UL HS driver.
Till it is implemented blacklist sa2ul for am64xx hs and j7200 hs
Change Suggested by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
The videnc-test-app provides the video encoder test app
(tienc_encode) for j7-evm.
Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Sidraya <sidraya.bj@pathpartnertech.com>
Found a bug in the PRU_ICSSG examples in PSSP v6.0.0, fixed in v6.0.1.
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
This patch adds support for J721e HS SR1.1
HS SR1.1 requires updated sysfw binary. Both SR1.0 and SR1.1 sysfw
binary will be generated. sysfw.itb will point to SR1.1
This patch requires J7 SR 1.1 support in K3 Image gen.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Add the firmware packaging recipe for the video decoder
for j721e.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
We cannot use j7200 keyword for match b'n j7200-evm and j7200-hs-evm due
to existing j7 keyword, we need to duplicate all the j7200 entries for hs.
Also sign the DM firmware for J7200 similar to J7 HS
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Ryan Eatmon
Kevin Hilman
Hari Nagalla
Roger Quadros
Praneeth Bajjuri
Nishanth Menon
Amjad Ouled-Ameur
Yogesh Siraswar
Sidraya
Nick Saulnier