All of our platforms here support running EFI binaries. We can have wic
generate a simple grub.cfg file for us that will find the root partition
via PARTUUID and utilize the device tree that is already discoverable
via the EFI configuration tables. Assuming the EFI loader is U-Boot,
this device tree can be replaced at run-time by the normal mechanism of
loading in to memory and passing that address as an argument to bootefi.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Build is failing for ti-rtos-firmware when ARAGO_BRAND = "mainline"
with below error:
"ERROR: ti-rtos-firmware-08.00.00.32-r0.0 do_fetch: Fetcher failure:
Unable to find file file://0001-Revert-soc-am64x-Makefile-Move-the-
SPL-Load-address-.patch;patchdir=../imggen anywhere."
This is because the mentioned patch is not present in the current path.
Fix this by updating the path to include ti-sci-fw
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Changes for firmware update( eff643e5 ti-rtos-firmware: update the
source to ti-linux-firmware) were in-complete without soft link.
1) Added soft link missing for the rtos firmware.
2) Updated the IPC am64x firmware name to be consistent with 7.3
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Tested-by: Grygorii Strashko <grygorii.strashko@ti.com>
These are the complete changes in the patch
1) Updated the firmware to fix IPC load issue due to resource_table
placement
2) Added the INC_PR
3) Updated the RTOS version
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Update AM65x SR2.0 prueth firmware to 02.02.09.03 that adds support for
100M HD mode.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
This is temporary change to pick the 08.00.00.026 firmware from
ti-linux-firmware repos:
1) Using the ti-sci-fw to pick the latest firmware and support AUTOREV
in future
2) Kept the destination folder name same to avoid wide-spead changes to
other recipes. Since that will be changed as part of over-all clean-up
TODO:
1) Re-structure rtos firmware repo and update all dependent firmware recipes.
2) Fix the destination folder name to match src folder
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Update u-boot recipe to be on the latest official upstream tag.
This introduces initial support for AM64x which works with v5.13
kernel tag.
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
J721E EdgeAI Kit (EAIK) is a low cost, small form factor board designed
for TI’s J721E SoC. TI’s J721E SoC comprises of dual core A72, high
performance vision accelerators, video codec accelerators, latest C71x
and C66x DSP, high bandwidth real-time IPs for capture and display,
GPU, dedicated safety island and security accelerators.
J721E EAIK supports the following interfaces:
* 4 GB LPDDR4 RAM
* x1 Gigabit Ethernet interface
* x1 USB 3.0 Type-C port
* x3 USB 3.0 Type-A ports
* x1 PCIe M.2 E Key
* x1 PCIe M.2 M Key
* x2 CSI2 Camera interface (RPi and TI Camera connector)
* 40-pin Raspberry Pi compatible GPIO header
J721e EVM and EAIK uses the unified bootloader. Add j721e eaik dtb
for machine=j721e-evm
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
And lets work with the latest kernel and while at it bump the system up
to latest ti-upstream-tools repo to get:
* AM65x SR1.0 overlay support
* EFI configuration to allow for the eventual support
* Few more cleanups for new architectures that have popped in.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Commit 02a2433c ("ti-sci-fw: Update image gen to latest") switched to a
newer commit in k3-image-gen that also picked up TISCI firmware release,
However, does include a change where the SPL address changed.
This switch in address has been queued for upstream in a future release
(v5.14 + u-boot 2021.10) and current mainline formal tags do not support
this address change. As a result, we have a broken AM64x mainline
support.
Revert this specific change from k3-image-gen for mainline alone for
now.
NOTE: This uses ARAGO_BRAND=mainline which is NOT accurate for meta-ti
which is distro independent, hence without appropriate changes while
using alternate distros, this change will not take effect.
Reported-by: Tom Rini <trini@konsulko.com>
Suggested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Just updating imggen to a configuration compatible with latest firmware
should not have been accepted, we should have ensured that firmware
commit has moved correspondingly as well. Fix the same, else we get a
broken system.
Fixes: 406f599822 ("ti-sci-fw: Update imggen to release 08.00.00.001 tag")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Upgrade optee-os to upstream 3.12.0 on dunfell branch.
upstream optee 3.13.0 tag has the following patches.
f50962e3 ta_dev_kit.mk: make sure that libutils is linked second time
73196b58 link.mk: implement support for libnames-after-libgcc variable
36e784f6 libutils: provide empty __getauxval() implementation
Hence removing from here.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Directly take the images from ti-linux-firmware instead of using pdk build,
due to inconsistency of PDK releases vs Linux SDK releases vs different
SoCs.
Update to FW version: REL.CORESDK.08.00.00.20
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Jailhouse support is dropped for K3 platforms, remove the
recipe and corresponding patches.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Jailhouse support is dropped for K3 platforms. So the ivshmem
(inter VM shared memory) based UIO driver and test applications
cannot be build and are not required.
Remove the recipes for the same.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
update linux-firmware to latest which has sync from upstream linux-firmware main branch.
This commit also picks latest version of DisplayPort firmware v2.1.0
commit f99d6a1d579e ("linux-firmware: update firmware for mhdp8546")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
update image gen to latest.
This commit also picks AM64x boot critical fix.
commit e411dc16862b ("soc: am64x: Makefile: Move the SPL Load address to 0x70000000")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
commit 8b206b32ec ("conf: j7-evm: Remove unavailable dtb/o from 5.10 kernel")
removed all non-existent dtb* for j7-evm as they were not
available on linux 5.10 branch at that time.
Since the support for pm1 SOM with tps65917 PMIC is added in ti-linux-5.10.y by
commit dd97d0bbafb7 ("arm64: dts: ti: k3-j721e: Add support for pm1 SOM with tps65917 PMIC")
This patch adds the support back with the supported dtb.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
commit 9ea50db095 ("conf: am65xx-evm: Remove non-existent dtb* from 5.10")
removed all non-existent dtb* for am65xx-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces following display overlays.
- k3-am654-evm-tc358876.dtbo
- k3-am654-evm-oldi-lcd1evm.dtbo
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
This patch adds overlay to support icssg1-dualemac
ie: 1 x CPSW3g ports and 2 x ICSSG1 ports configuration
overlay: k3-am642-evm-icssg1-dualemac.dtbo
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
commit 8b206b32ec ("conf: j7-evm: Remove unavailable dtb/o from 5.10 kernel")
removed all non-existent dtb* for j7-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces k3-j721e-common-proc-board-infotainment.dtbo overlay.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Add prebuilt PRU Ethernet FW for am64xx-evm which is the same as
for AM65x SR2.0.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Added KERNEL_DTB_OVERLAY_SUPPORT to common ti-soc include. This fixes the issue
where the dtbs are build without symbols causing issue with overlays.
Please note this increases the size of the dtb for all platform
derived from ti-soc. So for custom boards disable it from local.conf to
reduce size.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
With U-Boot supporting both am64xx-evm and am64xx-sk with single
defconfig, there is not need for a new machine for am64xx-sk.
So, drop support for am64xx-sk machine.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Tom Rini
Yogesh Siraswar
Vignesh Raghavedra
Denys Dmytriyenko
Nishanth Menon
Sinthu Raja
Lokesh Vutla
Praneeth Bajjuri
Grygorii Strashko
Nikhil Devshatwar