This has 2 problems:
1) | Warning: partition 1 does not end at a cylinder boundary
|
| sfdisk: I don't like these partitions - nothing changed.
2) CCCCCCCCC on the beaglebone, the ROM code doesn't accept it after fixing 1) with --force
This reverts commit ed09701ebe.
Fixes:
* 100% CPU usage when no test is running
* Turn on USB host session before checking for usb-serial device
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Align partitions for SD card performance/wear optimization. For more
details, please see:
http://sakoman.com/OMAP/a-script-for-partitioningformatting-a-bootable-sdmicrosd-card.html
# Modifications to align partitioning by Steve Sakoman
# based on work by Arnd Bergmann
# Align partitions for SD card performance/wear optimization
# FAT partition size is 131072 sectors (64MB) less:
# MBR - 1 sector
# padding to align to the page size of the underlying flash - 127 sectors
# so we start the first partition at sector 128 and make it 131072 - 128 = 130944 sectors
# second partition starts at 131072 and continues to fill the card
Signed-off-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Added:
- Output test status to USB serial port
- Made more verbose
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Enable the PL2303 usb-to-serial driver required for serial output
from the beaglebone tester.
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Acked-by: Jason Kridner <jdk@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
* Updated to latest SRCREV and bump PR.
Added following patches being submitted to PSP currently:
* EEPROM patches required to get EEPROM working correctly on BBB without
breaking support for EVM.
* omap_mux_init_signal patch to safe guard against incorrectly setting up pinmux.
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
This patch fixes the case where the EEPROM is programmed but we still use the
fall back case to detect the bone board. Now that EEPROMs are programmed, we should
correctly detect the bone board instead of relying on fall back to bone mode.
PR bumped
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Updated to latest version to pick up the following changes:
* 9158d7f am335x: Really correct NAND partiton layout
* 4723773 am335x: Wrap spl_board_init in a CONFIG_SPL_BOARD_INIT check
* 40c310c Change CPU to 720MHz and bump VDD1 to 1.26V
* 9c154ee Add missing i2c0 pin mux configuration in spl_board_init
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
* Remove usb gadget modules in advance before running the tests
* Merge Koen's patch - check for command line argument using systemd (hardware tests trigger)
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Fixed a bug where the U-boot environment files are not copied to the boot partition if they
were installed in /boot by other recipes.
We should copy the uEnv.txt and user.txt always without placing a condition for the presence
of anything else in /boot. This is the original behavior of sdcard_image before the recent
wave of changes to it.
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Updated the USER LED patch to include BeagleBone tester specific initialization/code.
Build and run time tested.
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Koen Kooi
Joel A Fernandes
Andreas Müller
Denys Dmytriyenko
Jason Kridner
Khem Raj