RPM does not accept '-' as a character in the PR/version and fails with:
| error: line 4: Illegal char '-' (0x2d) in: Release: sgxrgx-54fd9d7dea098b6f11c2a244b0c6763dc8c5690c.1
The correct approach is to reference SRCPV and not SRCREV and also add it
to PV and not PR. But PV is used in the branch to fetch the sources and
cannot be modified, so use SRCPV in PR w/o any illegal characters.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
With the current implemetation is not possible to remove the '-k3r5'
customization using overrides like below and the '-k3r5' always stay there.
| TMPDIR:remove:k3r5 = "-k3r5"
| or
| TMPDIR:k3r5 = "${TOPDIR}/tmp"
This patch allows to build the core-image-minimal in oe-core master/nanbield
without any issue on a common TMPDIR folder just using the following:
| TI_COMMON_DEPLOY = "${DEPLOY_DIR}"
| TI_TMPDIR_APPEND = ""
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are preparing to migrate our uboot version to 2024.01. As we are still
working on the migration, mark the default preference low for this
version. We will enable building with this uboot in a meta-arago brand
in the near future. Once the migration is complete, we will remove the
2023.04 uboot and make this the default.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We are preparing to migrate our kernel version to 6.6. As we are still
working on the migration, mark the default preference low for this
version. We will enable building with this kernel in a meta-arago brand
in the near future. Once the migration is complete, we will remove the
6.1 kernel and make this the default.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the BB.org kernel to the latest. Also update BeaglePlay device
tree list, as there were some renames and new additions.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
commit [1] created a common LPM wkup sources overlay and removes
k3-am62x-sk-mcu-gpio-wakeup.dtso for am62 device family.
k3-am62x-sk prefix picks this overlay for am62xx, am62axx and am62xxsip already.
This patch picks the necessary overlay for am62xx-lp-evm since it doesnt use
the same prefix as other am62 platforms.
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/?&id=4ba1886b886d
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update SRCREV for ti-jailhouse. All the patches which was being applied via yocto
have been moved to ti-jailhouse repo now. So remove the patches from SRC_URI and
files.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add support for ti-extras for am62pxx to control the kernel and u-boot
repos, branches, and srcrevs via the TI_EXTRAS variable in the local.conf
file.
Also add am62pxx as compatble machine in jailhouse recipe. So the am62pxx
jailhouse build can be done by adding TI_EXTRAS=tie-jailhouse in local.conf.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
A bug was introduced while trying to unify the Mesa version that is used
on SGX GPU's and Rogue GPU's. It manifests itself as an immediate segfault
whenever you try and run something like glmark2-es2-wayland or
weston-simple-egl on certain Rogue based platforms (specifically am62x).
Use different srcrev for Rogue GPU and SGX GPU platforms. The SGX GPU platforms
will use the latest commit. Rogue GPU platforms will use the last good working
commit before SGX related changes were introduced.
This change will be reverted once the issue is rootcaused and a common solution
is found for both Rogue and SGX based GPU platforms.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Anand Balagopalakrishnan <anandb@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Upgrade to v6.3.0 version.
This release adds resources for using AM243x & AM64x PRU cores with cores
running FreeRTOS:
* The RTOS Getting Started Labs
* Examples for using PRU GPIO and the broadside interface
* SORTE_G example (a custom networking interface)
Bug fixes:
* AM64x & AM65x header files, fix the names of extended sections to be in the
format of
ConstantsTableName_0x100
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Nick Saulnier <nsaulnier@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This k3r5 multiconfig builds baremetal components (and corresponding native,
nativesdk and cross tools) and sets TCLIBC accordingly to "baremetal". The
expectation is that those components and tools will use a separate TMPDIR
to isolate from the main Linux build that uses "glibc" TCLIBC and to avoid
potential conflicts.
OE-Core "nodistro" default configuration already sets TCLIBCAPPEND facility
to automatically add a suffix to TMPDIR, resulting in "tmp-baremetal" temp
directory for this multiconfig and "tmp-glibc" for the main Linux one. Other
distros like Arago follow this convention and even extend a bit (e.g. Arago
also adds TCMODE suffix to TMPDIR for external toolchain support separation).
But Poky (and derivative distros, like AGL or YoE) disable TCLIBCAPPEND and
result in a combined TMPDIR, leading to potential conflicts, such as:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=15273
And that's just the beginning, there were other conflicts observed later in
the build, e.g. during nativesdk builds - that's why we also set a unique
SDKPKGSUFFIX here.
To force a separate TMPDIR for k3r5 multiconfig, we have to directly append
a suffix to it. Multiple other options were tested in hopes of making it
slightly cleaner, but they either didn't work or were dismissed. For example,
trying to override TCLIBCAPPEND getting cleared by a distro would require
using a machine/soc-override, which doesn't have enough scope (nativesdk)
or forcing it with :forcevariable would also change the main Linux TMPDIR
and affect existing CI flows. Also, using TCLIBC itself as a suffix to add
to TMPDIR may result in getting it appended twice (tmp-baremetal-baremetal)
when normal TCLIBCAPPEND facility is used. Hence the least invasive/confusing
option is to always append "-k3r5" suffix to this multiconfig TMPDIR. That
results in "tmp-k3r5" in Poky (leaving main TMPDIR as "tmp"), while OE-Core
"nodistro" and Arago would end up with "tmp-baremetal-k3r5" (and "tmp-glibc"
for the main).
Also note, meta-ti-bsp layer.conf sets up images and sdks to be deployed
into a common location outside of TMPDIRs, but TI_COMMON_DEPLOY variable
that controls it is set weakly, allowing to be modified from a distro
configuration or local.conf. It means that all images and sdks can be
deployed into the main TMPDIR if one's CI flow expects tmp/deploy/ as
the final destination, by using := for immediate variable expansion:
TI_COMMON_DEPLOY := "${TMPDIR}/deploy"
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
commit [1] renamed the MCU GPIO wakeup overlay as k3-am62x-sk-mcu-gpio-wakeup.dtbo
k3-am62x-sk prefix picks this overlay for am62xx, am62axx and am62xxsip already.
This patch picks the necessary overlay for am62xx-lp-evm since it doesnt use
the same prefix as other am62 platforms.
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/?&id=24bd6ce832cd
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This was a temporary class to help with the v5.10 to v6.1 kernel
migration, now that we have completed that, remove this class.
Suggested-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We support Linux v6.1 as our official version for Kirkstone. The older
kernel version was kept around during the transition to the newer version,
but we are past that now. Remove this old version.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The SRCREV is auto updated, but the PV still uses the old tag version,
update this to v0.3.
While here, we also now have a proper LICENSE file, use that.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
commit f5851386 ("conf: machine: am62*: Pick common overlays by prefix")
picks common HDMI and CSI overlays for am62 platform variants.
Adding capability to extend the same prefix for common overlays for applicable
am62 platforms in more generic way to include new mcan overlays added [1]
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/?&id=3b01c392627f
given the differences in SK-AM62-LP containing B2B HDMI Samtec connector,
just added the kernel prefix to pick common mcan overlay.
for am62pxx: It has 4 MCANs vs all other am62xx devices have 3 MCANs,
hence keeping this prefix seperate for am62pxx to pick right overlay.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
These are all useful for firmware recipes but some recipes did not have
them. For firmware including ti-linux-fw.inc let's add these all to
one spot and remove them from any recipe that did already have these.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
These defines are specific to a SoC, not any specific board. Move these
to the SoC level for these boards to be consistent with boards already
doing this correctly.
J7200 didn't have these at all, add them while we are here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The common include ti-linux-fw.inc already includes setting this, no need
to set it in each recipe, remove that.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There is no compilation in this simple firmware recipe, no need for
these lines, remove them.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
These are common for all recipes that include ti-linux-fw.inc, add
it to this include file and remove from each recipe.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add support for ti-extras features for rt as it was added for non
rt kernel and u-boot earlier. It will also be accessible via the
TI_EXTRAS variable in the local.conf file.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Don't try to locate TI-TFL license within meta-ti-bsp relative to OE-Core
using COREBASE, as the directory structure of the layers is not guaranteed.
Instead, point to it relative to the recipe itself.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Minor rework of the TI include files used to override both SRCREV and
other settings in the optee recipes for TI SOC parts. The intent is to
make it more clear when we are changing SRCREVs versus changing other
items, and allow for sharing the SRCREV changes for optee-os-tadevkit
which should track the optee-os SRCREV.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the SRCREV to latest commit for both u-boot and linux
extras. Also update SRCREV for jailhouse branch for both psdk
linux and u-boot.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The previous allowance for overriding the value for the kernel is
incorrect. The kernel should not be changed from linux-dummy for the
k3r5 multiconfigs.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
There is a build error under master that is not present in kirkstone
related to .SECONDARY/.NOTINTERMEDIATE being set differently between the
ti-img-rogue-driver repo and the kernel. The long term solution to
allow this code to be built on both kirkstone/master is being
investigated. In the meantime, this patch gets things building on
master.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Move to the 23.2 release branch and bump SRCREV accordingly. This branch
has the proper implementation of the cache coherency fix along with some
other checks that address some system stability issues on Jacinto
devices.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Denys Dmytriyenko
Jose Quaresma
Ryan Eatmon
LCPD Automation Script
Praneeth Bajjuri
Paresh Bhagat
Darren Etheridge
Kamlesh Gurudasani
Andrew Davis
Randolph Sapp