And lets work with the latest kernel and while at it bump the system up
to latest ti-upstream-tools repo to get:
* AM65x SR1.0 overlay support
* EFI configuration to allow for the eventual support
* Few more cleanups for new architectures that have popped in.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Commit 02a2433c ("ti-sci-fw: Update image gen to latest") switched to a
newer commit in k3-image-gen that also picked up TISCI firmware release,
However, does include a change where the SPL address changed.
This switch in address has been queued for upstream in a future release
(v5.14 + u-boot 2021.10) and current mainline formal tags do not support
this address change. As a result, we have a broken AM64x mainline
support.
Revert this specific change from k3-image-gen for mainline alone for
now.
NOTE: This uses ARAGO_BRAND=mainline which is NOT accurate for meta-ti
which is distro independent, hence without appropriate changes while
using alternate distros, this change will not take effect.
Reported-by: Tom Rini <trini@konsulko.com>
Suggested-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Just updating imggen to a configuration compatible with latest firmware
should not have been accepted, we should have ensured that firmware
commit has moved correspondingly as well. Fix the same, else we get a
broken system.
Fixes: 406f599822 ("ti-sci-fw: Update imggen to release 08.00.00.001 tag")
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Upgrade optee-os to upstream 3.12.0 on dunfell branch.
upstream optee 3.13.0 tag has the following patches.
f50962e3 ta_dev_kit.mk: make sure that libutils is linked second time
73196b58 link.mk: implement support for libnames-after-libgcc variable
36e784f6 libutils: provide empty __getauxval() implementation
Hence removing from here.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Directly take the images from ti-linux-firmware instead of using pdk build,
due to inconsistency of PDK releases vs Linux SDK releases vs different
SoCs.
Update to FW version: REL.CORESDK.08.00.00.20
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Jailhouse support is dropped for K3 platforms, remove the
recipe and corresponding patches.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Jailhouse support is dropped for K3 platforms. So the ivshmem
(inter VM shared memory) based UIO driver and test applications
cannot be build and are not required.
Remove the recipes for the same.
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
update linux-firmware to latest which has sync from upstream linux-firmware main branch.
This commit also picks latest version of DisplayPort firmware v2.1.0
commit f99d6a1d579e ("linux-firmware: update firmware for mhdp8546")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
update image gen to latest.
This commit also picks AM64x boot critical fix.
commit e411dc16862b ("soc: am64x: Makefile: Move the SPL Load address to 0x70000000")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
commit 8b206b32ec ("conf: j7-evm: Remove unavailable dtb/o from 5.10 kernel")
removed all non-existent dtb* for j7-evm as they were not
available on linux 5.10 branch at that time.
Since the support for pm1 SOM with tps65917 PMIC is added in ti-linux-5.10.y by
commit dd97d0bbafb7 ("arm64: dts: ti: k3-j721e: Add support for pm1 SOM with tps65917 PMIC")
This patch adds the support back with the supported dtb.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
commit 9ea50db095 ("conf: am65xx-evm: Remove non-existent dtb* from 5.10")
removed all non-existent dtb* for am65xx-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces following display overlays.
- k3-am654-evm-tc358876.dtbo
- k3-am654-evm-oldi-lcd1evm.dtbo
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
This patch adds overlay to support icssg1-dualemac
ie: 1 x CPSW3g ports and 2 x ICSSG1 ports configuration
overlay: k3-am642-evm-icssg1-dualemac.dtbo
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
commit 8b206b32ec ("conf: j7-evm: Remove unavailable dtb/o from 5.10 kernel")
removed all non-existent dtb* for j7-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces k3-j721e-common-proc-board-infotainment.dtbo overlay.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Add prebuilt PRU Ethernet FW for am64xx-evm which is the same as
for AM65x SR2.0.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
Added KERNEL_DTB_OVERLAY_SUPPORT to common ti-soc include. This fixes the issue
where the dtbs are build without symbols causing issue with overlays.
Please note this increases the size of the dtb for all platform
derived from ti-soc. So for custom boards disable it from local.conf to
reduce size.
Signed-off-by: Yogesh Siraswar <yogeshs@ti.com>
With U-Boot supporting both am64xx-evm and am64xx-sk with single
defconfig, there is not need for a new machine for am64xx-sk.
So, drop support for am64xx-sk machine.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
As a step towards unification for am64xx-evm and am64xx-sk,
start including am64xx-sk dtb for machine=am64xx-evm.
Once U-Boot merges support for unified bootloader, am64xx-sk
machine can be dropped.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Commit 159cdb159ad0 ("perf-tests: add bash into RDEPENDS (v5.12-rc5+)")
in upstream openembedded-core layer.
Copying over a snippet of description over:
Commit 1dc481c0b0cf perf test: Change to use bash for daemon test
in upstream kernel
Changes tools/perf/tests/shell/daemon.sh to be explicitly bash
(it was already required, but was just skipped on various
distros).
We add it into our RDEPENDS for perf-tests to fixup 5.12+
builds.
We already have relatively heavy RDEPENDS for perf tests (python3), so
adding bash into the RDEPENDS isn't signifcant even for older perf
builds that use the same recipe.
[OE patch by: Bruce Ashfield <bruce.ashfield@gmail.com>]
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Update u-boot recipe to be on the bleeding upstream tag.
While at it, also update the u-boot source url to point to the new
server as per [1].
While it may be redundant, lets document the usage of URI and
PROTOCOL for those, who (cough), may get tripped otherwise.
[1] a3bbd0b912
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
ReIntroduce AM65x SR1.0 Overlay as the support for it
is added in the ti-linux-5.10.y kernel now.
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
commit 9ea50db095 ("conf: am65xx-evm: Remove non-existent dtb* from 5.10")
removed all non-existent dtb* for am65xx-evm as they were not
available on linux 5.10 branch at that time.
This patch reintroduces overlays present current on ti-linux-5.10.y kernel.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
The update brings the fix for 5.10.x linux kernel.
commit c0039f1fec25 ("cmemk: Fix 5.10 build errors for non Keystone2 platforms")
commit 8aba20e20bf7 ("cmemk: Fix build errors for 5.10+ kernels")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
bump SRCREV to latest to pick build fix for 5.10 kernel.
this update picks
commit 816485e68430 ("Merge pull request #1 in DBG/dsptop from for-5.10 to master")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
bump SRCREV to latest to pick build fix for 5.10 kernel.
this update picks
commit dd0c82fb5763 ("Merge pull request #1 in DBG/gdbc6x from for-5.10 to master")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Suman Anna <s-anna@ti.com>
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- dra7-evm-lcd-osd101t2045.dtb
- dra7-evm-lcd-osd101t2587.dtb
- dra71-evm-nand.dtb
- dra71-evm-lcd-auo-g101evn01.0.dtb
- dra72-evm-lcd-osd101t2045.dtb
- dra72-evm-lcd-osd101t2587.dtb
- dra72-evm-revc-lcd-osd101t2045.dtb
- dra72-evm-revc-lcd-osd101t2587.dtb
- dra76-evm-tfp410.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- am57xx-evm-cam-ov10635.dtb
- am57xx-evm-reva3-cam-ov10635.dtb
- am571x-idk-lcd-osd101t2045.dtb
- am571x-idk-lcd-osd101t2587.dtb
- am572x-idk-lcd-osd101t2045.dtb
- am572x-idk-lcd-osd101t2587.dtb
- am574x-idk-lcd-osd101t2587.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- am437x-gp-evm-hdmi.dtb
- am43x-epos-evm-hdmi.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Remove the non-existent dtb* , as they are not currently present on
ti-linux-5.10.y.
- am335x-icev2-prueth.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Remove the non-existent dtb, as they are not currently present on
ti-linux-5.10.y.
- keystone-k2g-evm-lcd.dtb
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Remove jailhouse overlay as it is not currently available in
ti-linux-5.10.y branch.
Removing for now, and shall be added back once they are
available in 5.10 kernel.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
The following dtb/o are not currently available in
ti-linux-5.10.y branch.
Removing for now, and shall be added back once they are
available in 5.10 kernel.
- ti/k3-j721e-proc-board-tps65917.dtb
- ti/k3-j721e-common-proc-board-infotainment.dtbo
- ti/k3-j721e-pcie-backplane.dtbo
- ti/k3-j721e-common-proc-board-jailhouse.dtbo
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
The eglplatform.h header is updated to account for deprecation of
MESA_EGL_NO_X11_HEADERS macro. Update srcrev to pick this change.
Signed-off-by: Gowtham Tammana <g-tammana@ti.com>
The additional patch for ti-sgx-ddk-km remaps the arm-oe-linux-gnueabi prefix
to the arm-linux-gnueabihf preferred target. Same should be done for the
arm-poky-linux-gnueabi prefix.
Signed-off-by: Zan Dobersek <zan@falconsigh.net>
Reviewed-by: Gowtham Tammana <g-tammana@ti.com>
It appears common-csl-ip-rtos does not require ti-sysbios dependency to build,
but ti-pdk.bbclass adds it by default. While most of PDK-based components do
require ti-sysbios to be built from sources, it is safe to remove it from CSL,
reducing the dependency tree for special cases like PRU FW based on CSL, but
not needing ti-sysbios.
This only affects firmwares built from sources against PDK and CSL, not when
RTOS firmwares are delivered in binary form for newer K3 platforms.
Build-tested on am335x, am57xx, k2g and am65xx.
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
update am64x rtos firmware to keep pinmux and control MMRs
remain unlocked now since linux needs this to be unlock.
this fix the USB and performance degradation issues.
am64xx: 07.03.00.19
Signed-off-by: Shiju Sivasankaran <shiju@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Switch to using all of multi-certificate boot images. This allows us
to create bootable images - in this case, we are missing tiboot3.bin
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
IMAGE type and dependencies can easily be centralized to SoC include
file. This is necessary to make sure that we don't do the duplication
and having multiple places to fix up.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Switch to using all of multi-certificate boot images. This allows us
to create bootable images - in this case, we are missing tiboot3.bin
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
wic and tar dependency on trusted firmware is wrong. It is u-boot build
that depends on trusted firmware deployment and is correctly handled by
u-boot recipe. No point in duplicating that dependency, so just clean it
all up.
Reported-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
We use the default IMAGE_BOOT_FILES configuration which matches up with
legacy boot configuration. Document the same to allow folks to
understand by just looking at the SoC include file.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
We use the default IMAGE_BOOT_FILES configuration which matches up with
legacy boot configuration. Document the same to allow folks to
understand by just looking at the SoC include file.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Lets keep things consistent by providing two possibilities for platforms
to pick from - legacy boot and multi-certificate boot.
In legacy boot, the base bootloader and system firmware are
maintained as separate binaries (tiboot3.bin and sysfw.itb).
In multi-certificate boot that newer K3 devices support, ROM is smarter
and can handle multiple x509 certificate based images: so we can strip
out the sysfw.itb and integrate it as part of tiboot3.bin itself. This
improves authentication and overall system boot times since we are now
able to boot both the system controller and the boot processor in
parallel.
We do have a scheme currently to identify the images necessary for boot
etc, but things are handled on a platform conf file basis. We can
improve that by introducing the pattern at the top level include and use
the relevant pattern in platforms as needed.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Remove duplicate machine-specific redefines of UBOOT_BINARY, UBOOT_IMAGE and
UBOOT_SYMLINK variables, as they are already defined with same values in the
common k3r5.inc file.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Fixes:
.../scripts/secure-binary-image.sh: line 69: openssl: command not found
.../scripts/secure-binary-image.sh: line 78: openssl: command not found
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
U-boot build process requires DM firmware to be signed for J7 HS.
It's better for ti-rtos-firmware package (that delivers DM firmware) to sign
it once and provide signed version to other packages, instead of U-boot needing
to re-sign it during build in staging location.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
OPTEEMACHINE name as defined in the optee_os project [1] for
j721e is k3-j721e.
This patch fixes the name to correct target.
[1]: 87613cf952
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Acked-by: Denys Dmytriyenko <denys@konsulko.com>
ti-upstream-tools[1] repository carries the overlays and defconfig
fragments that we don't wish to overload upstream kernel community with.
The reason for that being these are constantly on churn as our test
coverage increases etc. Currently we reuse the "BRANCH" variable to also
matchup with kernel and ti-upstream-tools repositories as well.
This can tend to be a little painful if we decide to start testing
various kernel configurations - RT etc.. So, lets just split out the
TOOLS_BRANCH separated from the branch we use for kernel. Even though
the branch remains the exact same at this point.
[1] https://git.ti.com/cgit/ti-linux-kernel/ti-upstream-tools/
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Add GNU Multiple Precision Arithmetic Library as a dependency for
mainline linux builds. These are necesary for kernel to handle gcc
plugins for builtins.h
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
The J7200/AM64 ti-sci-fw needs to be installed in the deploy
directory so that it can be packaged in Processor SDK bundle
This is required because the ti-sci-fw is needed in the
installer prebuilt-images in order to build the combined boot
image for J7200/AM64
Signed-off-by: Lucas Weaver <l-weaver@ti.com>
Update the image gen and linux-firmware commit SHAs so that
we pick v2021.01a sysfw and the applicable
DM update with following version
* 07.03.00.21 for J721E and J7200
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
update ti-rtos-metadata and ti-rtos-firmware recipes of meta-ti to
pick AM64x rtos firmware from mcu-plus-sdk instead of PDK.
Other devices such as AM65x, J7 continue to use fw from PDK.
Built and tested both IPC echo test applications - "rpmsg_client_sample”
& “rpmsg_char_simple”. Both tests passed for all remote R5F cores
on AM64x EVM
Signed-off-by: Shiju Sivasankaran <shiju@ti.com>
[praneeth@ti.com: rebase to dunfell/next]
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Boards like the beaglebone currently hardcode "u-boot" as a dependency
for the image and the wic format, and this prevents one from choosing
a different bootloader via:
PREFERRED_PROVIDER_virtual/bootloader = "non-u-boot-bootloader"
Depending on "virtual/bootloader" instead of "u-boot" fixes this.
Signed-off-by: Vivien Didelot <vdidelot@pbsc.com>
Suggested-by: Denys Dmytriyenko <denis@denix.org>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Between j7200 firmware tags 07.03.00.10 to 07.03.00.16
the downloadable weburl link changed
from *processor-sdk-rtos-jacinto7 to *processor-sdk-rtos-j7200.
This patch is to fix the recipe to pick the firmware from the
expected location on the new tag.
Fixes j7200 build error reported due to
77cdfa9f65 ("ti-rtos: Update metadata and versions for RTOS firmware")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
And lets work with the latest kernel
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Bump up our recipe version for ti-upstream-tools for updates in config
files needed for latest kernel
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Update the image gen and linux-firmware commit SHAs so that
am65x, j7200 and j721e also picks v2021.01 sysfw and the applicable
DM update with following version
* 07.03.00.12 for J721E
* 07.03.00.10 for J7200
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Add combined boot flow support for the AM64XX SK device.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
AM642 StarterKit (SK) board is a low cost, small form factor board
designed for TI’s AM642 SoC. Add machine definition for SK board.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Update SRCREV to latest commit that includes AM64xx SK platform
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Latest versions of Linux kernel (5.10) and U-boot (2021.01) are not yet ready
for prime time in meta-ti and some features are still being migrated and causing
issues. The recipes are meant for development and not yet for production.
Normally selection of the version is done with PREFERRED_VERSION by the Distro
(e.g. Arago), but if not specified by a Distro (Poky, distroless, etc.), the
default is to use the latest version. Hence need to change the default to not
automatically pick the latest version that is not ready yet.
This can be removed/reverted once those versions are ready to be picked by
default.
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the image gen and linux-firmware commit SHAs so that
am65x, j7200 and j721e also picks v2020.12a sysfw and the applicable
DM update on j7200 and j721e based on 07.02.00.10 tag
Signed-off-by: Dan Murphy <dmurphy@ti.com>
The 7200-hs-evm does not exist as a machine and if it did then this
directive should have been j7200-hs. So just remove it as it is
unneeded.
From: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the image gen and linux-firmware commit SHAs so that
am65x, j7200 and j721e also picks v2020.12 sysfw and the applicable
DM update on j7200 and j721e based on 07.02.00.05 tag
Dan Murphy - Removed am64xx PV over ride
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
As meta-arm has this version in master, but not in dunfell, temporarily overlay
corresponding patches locally - could be removed for the next release. Need to
alter FILESEXTRAPATHS for bbappend to locate local patches.
Since meta-arm/dunfell has 3.8-specific patches in SRC_URI, let's redefine it
completely to match 3.11-specific patch list in meta-arm/master.
Last, but not least, guard all upstream recipe varibales with "ti-soc" override
to only affect platforms in meta-ti, but not any other BSPs.
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update the image gen and sysfw commit SHAs so that am64x picks
v2020.12 version.
Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update SRCREV to pick latest that includes AM64X support
commit 65dd16b4e ("ti: k3: Introduce lite device board support")
adds support of AM64X platform in ti-atf branch.
This patch updates the SRCREV and also updates the BOARD to "lite" to
build for the mentioned platform.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Suggested-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Update the ti-rpmsg-char library to 0.3.0 version that enables
the support for the various R5F remote processors on AM64x SoCs.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Update to v2.4 tag merge from upstream to keep TF-A in sync.
For major changes in trusted-firmware-a, See:
https://trustedfirmware-a.readthedocs.io/en/latest/change-log.html#version-2-4
TI specific fixups include:
- stub for shutdown (CPUs enter wfi)
- uart console is now configurable.
While at it, update to include PV_k3 as 2.4. We use PV_k3 instead of
PV since this allows meta-ti to not affect other platforms esp in a
multi-BSP configuration.
We also add LIC_FILES_CHKSUM_k3 to make sure that we don't let any
re-licensing in the project pass through unnoticed as that has to
be carefully examined for making sure we have all the right legal
compliance - There has been no change compared to previous versions,
but we introduce this as a protection in case there is a change in the
future.
Reviewed-by: Denys Dmytriyenko <denis@denix.org>
Suggested-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
commit a6904f563f ("Remove redundant YYLOC global declaration")
is in ti-u-boot-2020.01 branch now.
Updating SRCREV of ti-u-boot-2020.01 to pick the patch from there.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Backport a patch from upstream to fix build on distros with gcc10+
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
2020-11-19 10:33:45 -06:00
88 changed files with 490 additions and 436 deletions
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
