Update the SRCREV to the commit when trng support was
added in upstream OP-TEE for am62x platform to access rng.
Also, enable trng support as trng support is added now in OP-TEE
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the HS platform to the compatible list in the recipe.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the HS platform to the compatible list in the recipe.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Changes to support new j784s4-hs platform in:
1) ti-sci-fw_git: Update firmware prefix for j784s4-hs
2) atf: sign the image
4) optee: sign the image
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Sign the firmwares for j784s4 similar to j721s2 hs.
Duplicate all j784s4 entries for j784s4-hs as we cannot use same
keyword for match between j784s4-evm and j784s4-hs-evm.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Machine conf for J784S4 HS platform.
Used J721S2 hs as reference.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Otherwise undefined variable is returned literally as ${TI_SECURE_DEV_PKG_K3}
and the condition won't work.
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Include ti-paths.inc so TI_K3_SECDEV_INSTALL_DIR_RECIPE gets defined and
artifacts are installed in the correct location.
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the source revision for the rogue pvr kernel module.
Source changelog:
- A hack was added to increase stability on J7 platforms while we are
looking into a proper fix for cache coherency issues in this module
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
update firmware name to wave521c_k3_codec_fw.bin to align with
linux-firmware main branch. the following patch is part of
ti-linux-firmware thru mainline sync.
commit 48407ffd ("cnm: update chips&media wave521c firmware.")
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
OP-TEE upstream now has support for sa3ul for j721s2 platform.
Re-enable the trng driver which was disabled earlier.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Change the OP-TEE flavour from default k3-j721e to k3-j784s4
as sa3ul support for j784s4 is upstreamed in OP-TEE and we
can use the same settings in j721s2 to access TRNG.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the new OP-TEE flavour for J784S4 instead of default k3-j721e.
The TI-SCI ID for MCU domain sa2ul/sa3ul are not the same for
J721E and J784S4. So a new flavour is added in upstream OP-TEE.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the SRCREV to the commit when sa3ul support was
added in upstream OP-TEE for J784S4 platform to access rng.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Serial console in J721S2/J784S4 EVM config was set to ttyS10. It should be ttyS2.
This caused sysv based systems (eg, tiny) to apparently hang because of no login prompt.
This didn't show up as a problem on systemd systems (eg, default) because systemd will
automatically setup a serial tty with the console option passed in on the kernel command line
(using console=...), which U-Boot correctly passes in as ttyS2 for J721S2/J784S4.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the graphics recipes source revision and remove the old BVNC
switch. The BVNC is now baked into the platform Makefile that is
selected with PVR_BUILD_DIR / TARGET_PRODUCT.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update the ti-rpmsg-char library to 0.5.1 version that enables the
support for R5F on am62x SoCs.
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Adds support for secure firmware images in J721S2 HS EVM.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Adds support for secure firmware images in J7200 HS EVM.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Adds support for secure firmware images in J721E HS EVM.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
devtool has a long-standing bug where it cannot handle references to ${WORKDIR}
due to externalsrc:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=12677
linux-ti-mainline clones additional ti-upstream-tools repo alongside the kernel
sources into ${WORKDIR}, which exposes this devtool bug.
Work around the issue by moving ti-upstream-tools inside the kernel source tree,
i.e. inside ${S}
Reported-by: Radoslav Pesek <radoslav.pesek@microstep-mis.com>
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The supported device types depends on the SoC, not on any specific
board or EVM. Any board can be populated with any of the 3 supported
AM64x types. Move these into the AM64x common include.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
AM64x devices will only be available as SR2.0 HS-FS. Set this as the
default type provided by the SDK. To allow SR2.0 HS-SE to continue to
boot, like we did with GP, we add an extra machine to build SR2.0 HS-SE
SYSFW. To use on SR2.0 HS-SE boards simply switch out the SYSFW image:
$ cd /mnt/sd-card/boot
$ mv tiboot3-am64x_sr2-hs-evm.bin tiboot3.bin
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
cdns mhdp bridge is present in j721s2 soc.
Add the dependency for the same
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Switch the DEPENDS_append expression to use d.getVar() instead of the
usual variable expansion to prevent the inline Python command from
becoming mangled.
Signed-off-by: Randolph Sapp <rs@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
During resume from low power mode suspend OP-TEE prints some messages
on the UART. It seems this UART is not powered at this point in the
sequence breaking suspend/resume. We should track down the exact
prints and quiet them. Until we get that fix upstream, lets lower
the log level for this platform to unblock the LPM work.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update to the latest upstream master which is 3.18.0.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The regex originally to correct all URLs that were still using the old
git protocol didn't have a check in place to see if the URL was already
using the correct protocol.
This just fixes the two affected URLs.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This platform is similar to the currently supported am62xx-evm, except
that we currently need new defconfigs for u-boot and new dtbs in the
filesystem.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Hari Nagalla <hnagalla@ti.com>
Cc: Andrew Davis <afd@ti.com>
Cc: Praneeth Bajjuri <praneeth@ti.com>
Cc: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
In the latest U-Boot the HS images for AM64x have been renamed to the
default names, and the GP have been changed to *_unsigned. Remove
the overrides to pull the now default HS images.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This is needed for building the latest optee-examples.
While here switch to HTTPS for fetching from Github.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The HS-SE AM64xx machine can now be run on GP devices and built without
needing the TI_SECURE_DEV_PKG for the same. AM64xx will only be available
in the HS-FS type going forward. Make the HS-SE the default and remove
the original GP machine.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This machine was missed when making combined R5 boot the default.
Add this machine to fix build failure.
Reported-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
FIT Image based kernels are valid for all K3 devices, not just HS, deploy
this kernel image type by default so it doesn't have to be appended on
a per-device-type basis.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Use multiconfig to generate a GP SYSFW image. This allows the HS SDK
to be used on GP boards by simply switching out the SYSFW image:
$ cd /mnt/sd-card/boot
$ mv tiboot3-am64x-gp-evm.bin tiboot3.bin
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update to the latest commit of ti-u-boot-2021.01.
As part of this U-Boot update the non-HS AM64x-evm defconfig was removed.
This is okay as building this defconfig without defining TI_SECURE_DEV_PKG
will still result in usable binaries for the non-HS devices. Use the
HS defconfig for both the HS and non-HS machines.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This recipe deploys the raw SYSFW unconditionally which causes issues
when doing multiconfig builds. What should happen is only one deploys
these, select that the same way we select which one deploys the default
SYSFW symlink. Move the deploy step there.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The K3 TI_SECURE_DEV_PKG is the same for all devices, move this out
of each machine file and into the common K3 includes. This doesn't
have any effect on the GP machines as they make no use of it.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add SYSFW_TIBOOT3_SYMLINK and use it the same way we use SYSFW_SYMLINK
for the non-combined boot flow, to allow not setting the default for
some machine types.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Going forward, the combined tiboot3.bin is going to be the standard. Only
AM65x and J721e will still use the split boot.
Set DEPENDS and EXTRA_OEMAKE for combined boot and override only for the
two split boot platforms. This makes it easier to add new platforms and
simplifies deployment logic.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Going forward, the combined tiboot3.bin is going to be the standard. Only
AM65x and J721e will still use the split boot. Set the output of U-Boot
to be u-boot-spl.bin by default and override only for the two split boot
platforms. This makes it easier to add new platforms and simplifies
deployment logic.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This makes sense but looks like was done wrong to match AM65xx which
needed the exact EVM specified due to this only working on SR2.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We already cd into DEPLOYDIR so this is not needed. This now matches the
keystone version below. Also fixes build in some odd situations.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Currently we reuse UBOOT_* names which usually are the same we
want to give to the name of the SYSFW binary. This isn't always
correct, we should use a SYSFW specific variable in case the
UBOOT names are changed.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This allows us to rebuild and re-sign the SYSFW image if needed from
the deploy directory for any SoC type.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The k3-image-gen now has two new helper flags SOC_TYPE and SYSFW_DIR
that we can use to simplify this recipe. With these we do not need to do
anything different here for HS builds, the SOC_TYPE selects this now.
DL_URL also do not need cleared anymore, the k3-image-gen will no longer
download missing files when not needed for the current build type.
do_install and do_deploy can also check for the existence of either
sysfw.itb or tiboot3.bin and install/deploy as needed. k3-image-gen only
gerneates the right one now depending on the SoC. Merge all these
steps for all SoCs.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Only the first two K3 devices do not support multi-cert boot so
lets make multi-cert the default and only add back sysfw.itb
for these two devices.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: lines be preserved?
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
devtool does not work with the current formulation of
the LOCALVERSION variables. We need to use SRCPV to
avoid AUTOREV on bleeding builds, but there will be no
+ in the string, so we cannot split on that. Just
use SRCPV directly.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
With J7200 PG1.0 being deprecated, use PG2.0 sysfw when building images for j7200-hs-evm.
Also update k3-image-gen version to support this change.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
arago-project.org is being shut down in August. This
commit changes the last recipes that point to that
old site to point to git.ti.com, or just rmeove the
reference entirely.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Commit bdceaa05ac added SR1.1 support for
J721e HS with the idea that the default sysfw.itb will point to SR1.1.
For that to work, the config for SR1 has to explicitly disable creating
such symlink.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The test app is not compatible with later versions of j7, so
add COMPATIBLE_MACHINE to lock these recipes down to just
j7-evm and j7-hs-evm.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
For ARAGO_BRAND=mainline with the am43xx machines, avoid the inclusion
of device tree files that do not exist upstream.
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
For ARAGO_BRAND=mainline with the dra7xx-evm MACHINE, avoid the
inclusion of device tree files that do not exist upstream.
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
For ARAGO_BRAND=mainline with the am57xx-evm MACHINE, avoid the
inclusion of device tree files that do not exist upstream.
Signed-off-by: Drew Fustini <dfustini@baylibre.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The following commits in ti-linux-5.10.y kernel has introduced a new dtb.
commit: 9b05b2a89ff ("arm64: dts: ti: Add overlay for GESI to enable main CPSW2G in J721S2")
This patch on j721s2 conf is to include the new dtb.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The SA2UL driver now works on HS devices, unblock this.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The TRNG driver is not currently functional for these two platforms.
Disable the TRNG driver until fixed.
Reported-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
IMAGE_BOOT_FILES was being overwritten in the HS recipes leading to
incomplete binaries in /boot and the naming of the binaries were not
correct.
Fixes /boot partition for HS devices.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
[afd: Extended fix to all HS platforms]
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update to the latest upstream master which is 3.17.
We do this to add HUK and AM64x/AM62x support.
With this we need to also switch OPTEEMACHINE for AM64x/AM62x.
To build against the latest OP-TEE the support recipes need updated also.
Move these here into meta-ti so that builds will still work when not using
meta-arago-distro.
The fix patches do not look to be needed anymore.
While here switch to git checkout with https.
NOTE: The latest OP-TEE requires SYSFW 8.04+
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
For TF-A we work against upstream first, our fork has only been
used in the rare cases we need to ship a feature before we can
get it upstream. This is not currently the case so lets switch
to upstream repo until there is a need for our fork.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add the HS platform to the compatible list in the recipe.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Sign the DM firmware for j721s2 similar to j7200 hs.
Duplicate all j721s2 entries for j721s2-hs as we cannot use same
keyword for match between j721s2-evm and j721s2-hs-evm.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Machine conf for J721S2 HS platform.
Used j7200 hs as reference.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add missing k3-am642-evm-icssg1-dualemac-mii.dtbo.
Reported-by: Judith Mendez <jm@ti.com>
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
2022-06-13 15:19:14 -05:00
123 changed files with 997 additions and 521 deletions
# Check the defconfig file and see if it points to an in kernel
# defconfig that should be used, or if it is a complete config file
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
