linux-am335x-psp: fix typo in the filename to use underscore

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

conf/machine/am180x-evm.conf

@@ -11,9 +11,8 @@ UBOOT_LOADADDRESS = "0xc0008000"
 
 IMAGE_FSTYPES += "tar.gz ubi"
 
-MACHINE_FEATURES = "kernel26 serial ethernet"
-
 SERIAL_CONSOLE = "115200 ttyS2"
 
 PREFERRED_PROVIDER_virtual/kernel = "linux-omapl138-psp"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am180x"
+PREFERRED_PROVIDER_u-boot = "u-boot-am180x"

conf/machine/am335x-evm.conf

@@ -1,23 +1,18 @@
 #@TYPE: Machine
 #@NAME: AM335x EVM
 #@DESCRIPTION: Machine configuration for the TI AM335x EVM
-TARGET_ARCH = "arm"
-
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-video-fbdev"
-
-GUI_MACHINE_CLASS = "smallscreen"
 
 require conf/machine/include/ti33x.inc
 
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen"
+
 IMAGE_FSTYPES += "ubi tar.gz"
 
 SERIAL_CONSOLE = "115200 ttyO0"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti33x-psp"
-
 # UBI information.  Note that this is board and kernel specific.  Changes
 # in your kernel port may require changes in these variables.  For more
 # details about this board please see
@@ -29,7 +24,7 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-ti33x-psp"
 # UBI: logical eraseblock size:    126976 bytes
 # from ubiattach stdout:
 # UBI device number 0, total 1988 LEBs
-MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 1988"
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3836"
 
 # do ubiattach /dev/ubi_ctrl -m 7 -O 2048
 # from dmesg:
@@ -38,10 +33,3 @@ MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 1988"
 # UBI: sub-page size:              512
 # UBI: VID header offset:          2048 (aligned 2048)
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
-
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-UBOOT_ARCH = "arm"
-UBOOT_MACHINE = "am335x_evm_config"
-
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"

conf/machine/am3517-evm.conf

@@ -2,38 +2,28 @@
 #@NAME: AM3517 EVM
 #@DESCRIPTION: Machine configuration for the TI Sitara AM3517 EVM
 
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-input-tslib \
-           xf86-video-omapfb \
-           xf86-input-keyboard"
-
-GUI_MACHINE_CLASS = "smallscreen"
-
 require conf/machine/include/omap3.inc
 
-# Ship all kernel modules
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen ethernet"
 
 IMAGE_FSTYPES += "ubi tar.gz"
 EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 
-SERIAL_CONSOLE = "115200 ttyS2"
+SERIAL_CONSOLE = "115200 ttyO2"
 USE_VT = "2"
 
 PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
 
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am3517"
+PREFERRED_PROVIDER_u-boot = "u-boot-am3517"
 
-UBOOT_ARCH = "arm"
 UBOOT_MACHINE = "am3517_evm_config"
 XLOAD_MACHINE = "am3517evm_config"
 
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen ethernet"
-
 # NOTE: there are NAND and OneNAND versions of this board...
-
 # do ubiattach /dev/ubi_ctrl -m 4
 # From dmesg:
 # UBI: smallest flash I/O unit:    2048
@@ -48,4 +38,3 @@ MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
 # UBI: physical eraseblock size:   131072 bytes (128 KiB)
 # UBI: sub-page size:              512
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
-

conf/machine/am37x-evm.conf

@@ -2,37 +2,23 @@
 #@NAME: AM37x EVM
 #@DESCRIPTION: Machine configuration for the TI AM37x EVM
 
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-input-tslib \
-           xf86-video-omapfb \
-           xf86-input-keyboard"
-
-GUI_MACHINE_CLASS = "smallscreen"
-
 require conf/machine/include/omap3.inc
 
-# Ship all kernel modules
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen ethernet"
 
 IMAGE_FSTYPES += "ubi tar.gz"
 EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 
-SERIAL_CONSOLE = "115200 ttyS0"
+SERIAL_CONSOLE = "115200 ttyO0"
 
 PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
-
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-UBOOT_ARCH = "arm"
-UBOOT_MACHINE = "omap3_evm_config"
-XLOAD_MACHINE = "omap3evm_config"
-
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am37x"
+PREFERRED_PROVIDER_u-boot = "u-boot-am37x"
 
 # NOTE: there are NAND and OneNAND versions of this board...
-
 # do ubiattach /dev/ubi_ctrl -m 4
 # From dmesg:
 # UBI: smallest flash I/O unit:    2048
@@ -47,4 +33,3 @@ MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
 # UBI: physical eraseblock size:   131072 bytes (128 KiB)
 # UBI: sub-page size:              512
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
-

conf/machine/am387x-evm.conf

@@ -1,7 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM389x evm
-#@DESCRIPTION: Machine configuration for the AM389x evm
-
-require conf/machine/include/ti814x.inc
-
-IMAGE_FSTYPES += "ubi tar.gz"

conf/machine/am389x-evm.conf

@@ -1,7 +0,0 @@
-#@TYPE: Machine
-#@NAME: am389x evm
-#@DESCRIPTION: Machine configuration for the am389x evm
-
-require conf/machine/include/ti816x.inc
-
-IMAGE_FSTYPES += "ubi tar.gz"

conf/machine/beagleboard.conf

@@ -2,27 +2,18 @@
 #@NAME: Beagleboard machine
 #@DESCRIPTION: Machine configuration for the http://beagleboard.org/ board 
 
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-video-omapfb \
-           xf86-input-keyboard"
+require conf/machine/include/omap3.inc
 
 # Only has DVI connector for external screen
 GUI_MACHINE_CLASS = "bigscreen"
 
-require conf/machine/include/omap3.inc
-
-# SPL build
-EXTRA_IMAGEDEPENDS = "u-boot"
-
 PREFERRED_PROVIDER_virtual/kernel = "linux-mainline"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-beagleboard"
+PREFERRED_PROVIDER_u-boot = "u-boot-beagleboard"
 
 IMAGE_FSTYPES += "tar.gz ubi"
-EXTRA_IMAGECMD_jffs2 = "-lnp "
+EXTRA_IMAGECMD_jffs2 = "-lnp"
 
-# Guesswork
 SERIAL_CONSOLE = "115200 ttyO2"
 
 UBOOT_MACHINE = "omap3_beagle_config"
@@ -44,8 +35,6 @@ MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
 # UBI: sub-page size:              512
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
 
-# and sdio
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
-
 # For a modularized kernel we want to drag in networking, sound, rtc etc."
-MACHINE_EXTRA_RRECOMMENDS = "kernel-module-smsc95xx kernel-module-snd-soc-twl4030 kernel-module-rtc-twl"
+MACHINE_EXTRA_RRECOMMENDS = "kernel-module-smsc95xx kernel-module-snd-soc-twl4030 kernel-module-rtc-twl \
+  kernel-module-snd-soc-omap kernel-module-snd-soc-omap-mcbsp kernel-module-snd-soc-omap3beagle"

conf/machine/beaglebone.conf

@@ -2,25 +2,13 @@
 #@NAME: BeagleBone machine
 #@DESCRIPTION: Machine configuration for the http://beagleboard.org/bone board 
 
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-video-fbdev"
+require conf/machine/include/ti33x.inc
 
 # Only has DVI connector for external screen
 GUI_MACHINE_CLASS = "bigscreen"
 
-require conf/machine/include/ti33x.inc
-EXTRA_IMAGEDEPENDS = "u-boot"
+IMAGE_FSTYPES += "tar.gz"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti33x-psp"
-
-IMAGE_FSTYPES += "tar.bz2 "
-
-# Guesswork
 SERIAL_CONSOLE = "115200 ttyO0"
 
 UBOOT_MACHINE = "am335x_evm_config"
-
-# and sdio
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"

conf/machine/c6a814x-evm.conf

@@ -1,5 +0,0 @@
-#@TYPE: Machine
-#@NAME: c6a814x evm
-#@DESCRIPTION: Machine configuration for the c6a814x evm
-
-require conf/machine/include/ti814x.inc

conf/machine/c6a816x-evm.conf

@@ -1,5 +0,0 @@
-#@TYPE: Machine
-#@NAME: c6a816x evm
-#@DESCRIPTION: Machine configuration for the c6a816x evm
-
-require conf/machine/include/ti816x.inc

conf/machine/dm814x-evm.conf

@@ -1,5 +0,0 @@
-#@TYPE: Machine
-#@NAME: DM814x evm
-#@DESCRIPTION: Machine configuration for the DM814x evm
-
-require conf/machine/include/ti814x.inc

conf/machine/dra7xx-evm.conf

@@ -0,0 +1,36 @@
+#@TYPE: Machine
+#@NAME: DRA7xx EVM
+#@DESCRIPTION: Machine configuration for the TI DRA7xx EVM
+
+require conf/machine/include/omap-a15.inc
+
+IMAGE_FSTYPES += "ubi tar.gz"
+
+SERIAL_CONSOLE = "115200 ttyO2"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1988 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3836"
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+# UBI: VID header offset:          2048 (aligned 2048)
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
+
+UBOOT_MACHINE = "dra7xx_evm_config"
+
+# Currently removing the sgx machine feature because there is no SGX package
+# available for omap5
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"

conf/machine/hawkboard.conf

@@ -1,29 +0,0 @@
-#@TYPE: Machine
-#@NAME: OMAP-L138 based board
-#@DESCRIPTION: Machine configuration for the TI Hawkboard
-
-require conf/machine/include/davinci.inc
-require conf/machine/include/omapl138.inc
-
-UBOOT_MACHINE = "da850_omapl138_evm_config"
-UBOOT_ENTRYPOINT = "0xc0008000"
-UBOOT_LOADADDRESS = "0xc0008000"
-
-MACHINE_FEATURES = "kernel26 serial ethernet ide screen"
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# From dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: logical eraseblock size:    126976 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 971 LEBs (123293696 bytes, 117.6 MiB), available 958 LEBs (121643008 bytes, 116.0 MiB), LEB size 126976 bytes (124.0 KiB)
-MKUBIFS_ARGS = "-m 2048 -e 126976 -c 948"
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# from dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: physical eraseblock size:   131072 bytes (128 KiB)
-# UBI: sub-page size:              512
-UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
-
-SERIAL_CONSOLE = "115200 ttyS2"

conf/machine/include/davinci.inc

@@ -1,14 +1,13 @@
 require conf/machine/include/tune-arm926ejs.inc
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r51"
-
+MACHINE_KERNEL_PR = "r53"
 
 KERNEL_IMAGETYPE = "uImage"
 
 PREFERRED_PROVIDER_virtual/kernel = "linux-davinci"
-
 PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
+
 UBOOT_MACHINE = "davinci_dvevm_config"
 
 UBOOT_ENTRYPOINT = "0x80008000"
@@ -19,6 +18,4 @@ EXTRA_IMAGEDEPENDS += "u-boot"
 SERIAL_CONSOLE ?= "115200 ttyS0"
 EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
 
-#ROOT_FLASH_SIZE = "29"
-
 MACHINE_FEATURES = "kernel26 serial ethernet usbhost usbgadget mmc alsa"

conf/machine/include/keystone.inc

@@ -2,13 +2,22 @@ SOC_FAMILY = "keystone"
 require conf/machine/include/soc-family.inc
 
 require conf/machine/include/tune-cortexa15.inc
+
 PREFERRED_PROVIDER_virtual/kernel = "linux-keystone"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-keystone"
+PREFERRED_PROVIDER_u-boot = "u-boot-keystone"
+
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r1"
+MACHINE_KERNEL_PR = "r6"
 
 KERNEL_IMAGETYPE = "uImage"
 
+UBOOT_MACHINE = "tci6638_evm_config"
+
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"
 
 EXTRA_IMAGEDEPENDS += "u-boot"
+EXTRA_IMAGEDEPENDS += "boot-monitor"
+
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat"

conf/machine/include/omap-a15.inc

@@ -0,0 +1,26 @@
+SOC_FAMILY = "omap-a15"
+require conf/machine/include/soc-family.inc
+
+require conf/machine/include/tune-cortexa15.inc
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r1"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+KERNEL_IMAGETYPE = "uImage"
+
+UBOOT_ARCH = "arm"
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+EXTRA_IMAGEDEPENDS += "virtual/bootloader"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-video-fbdev"
+
+GUI_MACHINE_CLASS = "smallscreen"

conf/machine/include/omap3.inc

@@ -2,14 +2,37 @@ SOC_FAMILY = "omap3"
 require conf/machine/include/soc-family.inc
 
 require conf/machine/include/tune-cortexa8.inc
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+
+# For built-in LCD, add xf86-input-tslib
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-omapfb \
+           xf86-input-keyboard"
+
+# Default to external video, change to smallscreen for built-in LCD
+GUI_MACHINE_CLASS = "bigscreen"
+
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r122"
+MACHINE_KERNEL_PR = "r125"
 
 KERNEL_IMAGETYPE = "uImage"
 
+# Default providers, may need to override for specific machines
+PREFERRED_PROVIDER_virtual/kernel = "linux-omap"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
+
+UBOOT_ARCH = "arm"
+UBOOT_MACHINE = "omap3_evm_config"
+XLOAD_MACHINE = "omap3evm_config"
+
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"
 
-EXTRA_IMAGEDEPENDS += "u-boot x-load"
+# If SPL is not used, may need to add x-load
+EXTRA_IMAGEDEPENDS += "u-boot"
 
+# List common SoC features, may need to add touchscreen/ethernet for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa sgx"

conf/machine/include/omap4.inc

@@ -20,6 +20,8 @@ MACHINE_KERNEL_PR = "r1"
 
 KERNEL_IMAGETYPE = "uImage"
 
+UBOOT_MACHINE = "omap4_panda_config"
+
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"
 

conf/machine/include/ti33x.inc

@@ -2,13 +2,36 @@ SOC_FAMILY = "ti33x"
 require conf/machine/include/soc-family.inc
 
 require conf/machine/include/tune-cortexa8.inc
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti33x-psp"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+
+# For built-in LCD, add xf86-input-tslib
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-fbdev \
+           xf86-input-keyboard"
+
+# Default to external video, change to smallscreen for built-in LCD
+GUI_MACHINE_CLASS = "bigscreen"
+
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r16"
+MACHINE_KERNEL_PR = "r19"
+
+# Default providers, may need to override for specific machines
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
 
 KERNEL_IMAGETYPE = "uImage"
 
+UBOOT_ARCH = "arm"
+UBOOT_MACHINE = "am335x_evm_config"
+
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"
 
 EXTRA_IMAGEDEPENDS += "u-boot"
+
+# List common SoC features, may need to add touchscreen for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet sgx"

conf/machine/include/ti814x.inc

@@ -1,26 +0,0 @@
-SOC_FAMILY = "ti814x"
-require conf/machine/include/soc-family.inc
-
-require conf/machine/include/tune-cortexa8.inc
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti81xx-psp"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-# Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r2"
-
-KERNEL_IMAGETYPE = "uImage"
-
-UBOOT_ARCH = "arm"
-UBOOT_MACHINE = "ti8148_evm_config_nand"
-UBOOT_ENTRYPOINT = "0x80008000"
-UBOOT_LOADADDRESS = "0x80008000"
-
-# Only build u-boot
-EXTRA_IMAGEDEPENDS += "u-boot"
-
-# Ship all kernel modules
-IMAGE_FSTYPES += "jffs2 tar.bz2"
-EXTRA_IMAGECMD_jffs2 = "-lqn -e 128"
-SERIAL_CONSOLE = "115200 ttyO0"
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 ethernet"

conf/machine/include/ti816x.inc

@@ -1,26 +0,0 @@
-SOC_FAMILY = "ti816x"
-require conf/machine/include/soc-family.inc
-
-require conf/machine/include/tune-cortexa8.inc
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti81xx-psp"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-# Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r2"
-
-KERNEL_IMAGETYPE = "uImage"
-
-UBOOT_ARCH = "arm"
-UBOOT_MACHINE = "ti8168_evm_config"
-UBOOT_ENTRYPOINT = "0x80008000"
-UBOOT_LOADADDRESS = "0x80008000"
-
-# Only build u-boot
-EXTRA_IMAGEDEPENDS += "u-boot"
-
-# Ship all kernel modules
-IMAGE_FSTYPES += "jffs2 tar.bz2"
-EXTRA_IMAGECMD_jffs2 = "-lqn -e 128"
-SERIAL_CONSOLE = "115200 ttyO2"
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 ethernet"

conf/machine/include/tune-cortexa15.inc

@@ -1,4 +1,4 @@
-DEFAULTTUNE ?= "cortexa15-neon"
+DEFAULTTUNE ?= "armv7a-neon"
 
 require conf/machine/include/arm/arch-armv7a.inc
 
@@ -6,19 +6,31 @@ TUNEVALID[cortexa15] = "Enable Cortex-A15 specific processor optimizations"
 TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa15", "-mtune=cortex-a15", "", d)}"
 
 # Little Endian base configs
-AVAILTUNES += "cortexa15 cortexa15t cortexa15-neon"
+AVAILTUNES += "cortexa15 cortexa15t cortexa15-neon cortexa15t-neon"
+ARMPKGARCH_tune-cortexa15 = "cortexa15"
+ARMPKGARCH_tune-cortexa15t = "cortexa15"
+ARMPKGARCH_tune-cortexa15-neon = "cortexa15"
+ARMPKGARCH_tune-cortexa15t-neon = "cortexa15"
 TUNE_FEATURES_tune-cortexa15 = "${TUNE_FEATURES_tune-armv7a} cortexa15"
 TUNE_FEATURES_tune-cortexa15t = "${TUNE_FEATURES_tune-armv7at} cortexa15"
 TUNE_FEATURES_tune-cortexa15-neon = "${TUNE_FEATURES_tune-armv7a-neon} cortexa15"
-PACKAGE_EXTRA_ARCHS_tune-cortexa15 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a}"
-PACKAGE_EXTRA_ARCHS_tune-cortexa15t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at}"
-PACKAGE_EXTRA_ARCHS_tune-cortexa15-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon}"
+TUNE_FEATURES_tune-cortexa15t-neon = "${TUNE_FEATURES_tune-armv7at-neon} cortexa15"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a} cortexa15-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} cortexa15-vfp cortexa15t2-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} cortexa15-vfp cortexa15-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15t-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7at-neon} cortexa15-vfp cortexa15-vfp-neon cortexa15t2-vfp cortexa15t2-vfp-neon"
 
 # VFP Tunes
-AVAILTUNES += "cortexa15hf cortexa15thf cortexa15hf-neon"
+AVAILTUNES += "cortexa15hf cortexa15thf cortexa15hf-neon cortexa15thf-neon"
+ARMPKGARCH_tune-cortexa15hf = "cortexa15"
+ARMPKGARCH_tune-cortexa15thf = "cortexa15"
+ARMPKGARCH_tune-cortexa15hf-neon = "cortexa15"
+ARMPKGARCH_tune-cortexa15thf-neon = "cortexa15"
 TUNE_FEATURES_tune-cortexa15hf ?= "${TUNE_FEATURES_tune-armv7ahf} cortexa15"
 TUNE_FEATURES_tune-cortexa15thf ?= "${TUNE_FEATURES_tune-armv7athf} cortexa15"
 TUNE_FEATURES_tune-cortexa15hf-neon ?= "${TUNE_FEATURES_tune-armv7ahf-neon} cortexa15"
-PACKAGE_EXTRA_ARCHS_tune-cortexa15hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf}"
-PACKAGE_EXTRA_ARCHS_tune-cortexa15thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf}"
-PACKAGE_EXTRA_ARCHS_tune-cortexa15hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon}"
+TUNE_FEATURES_tune-cortexa15thf-neon ?= "${TUNE_FEATURES_tune-armv7athf-neon} cortexa15"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf} cortexa15hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} cortexa15hf-vfp cortexa15t2hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon} cortexa15hf-vfp cortexa15hf-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15thf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon} cortexa15hf-vfp cortexa15hf-vfp-neon cortexa15t2hf-vfp cortexa15t2hf-vfp-neon"

conf/machine/include/tune-cortexa7.inc

@@ -1,4 +1,4 @@
-DEFAULTTUNE ?= "cortexa7-neon"
+DEFAULTTUNE ?= "armv7a-neon"
 
 require conf/machine/include/arm/arch-armv7a.inc
 
@@ -6,19 +6,31 @@ TUNEVALID[cortexa7] = "Enable Cortex-A7 specific processor optimizations"
 TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa7", "-mtune=cortex-a7", "", d)}"
 
 # Little Endian base configs
-AVAILTUNES += "cortexa7 cortexa7t cortexa7-neon"
+AVAILTUNES += "cortexa7 cortexa7t cortexa7-neon cortexa7t-neon"
+ARMPKGARCH_tune-cortexa7 = "cortexa7"
+ARMPKGARCH_tune-cortexa7t = "cortexa7"
+ARMPKGARCH_tune-cortexa7-neon = "cortexa7"
+ARMPKGARCH_tune-cortexa7t-neon = "cortexa7"
 TUNE_FEATURES_tune-cortexa7 = "${TUNE_FEATURES_tune-armv7a} cortexa7"
 TUNE_FEATURES_tune-cortexa7t = "${TUNE_FEATURES_tune-armv7at} cortexa7"
 TUNE_FEATURES_tune-cortexa7-neon = "${TUNE_FEATURES_tune-armv7a-neon} cortexa7"
-PACKAGE_EXTRA_ARCHS_tune-cortexa7 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a}"
-PACKAGE_EXTRA_ARCHS_tune-cortexa7t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at}"
-PACKAGE_EXTRA_ARCHS_tune-cortexa7-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon}"
+TUNE_FEATURES_tune-cortexa7t-neon = "${TUNE_FEATURES_tune-armv7at-neon} cortexa7"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a} cortexa7-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} cortexa7-vfp cortexa7t2-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} cortexa7-vfp cortexa7-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7t-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7at-neon} cortexa7-vfp cortexa7-vfp-neon cortexa7t2-vfp cortexa7t2-vfp-neon"
 
 # VFP Tunes
-AVAILTUNES += "cortexa7hf cortexa7thf cortexa7hf-neon"
+AVAILTUNES += "cortexa7hf cortexa7thf cortexa7hf-neon cortexa7thf-neon"
+ARMPKGARCH_tune-cortexa7hf = "cortexa7"
+ARMPKGARCH_tune-cortexa7thf = "cortexa7"
+ARMPKGARCH_tune-cortexa7hf-neon = "cortexa7"
+ARMPKGARCH_tune-cortexa7thf-neon = "cortexa7"
 TUNE_FEATURES_tune-cortexa7hf ?= "${TUNE_FEATURES_tune-armv7ahf} cortexa7"
 TUNE_FEATURES_tune-cortexa7thf ?= "${TUNE_FEATURES_tune-armv7athf} cortexa7"
 TUNE_FEATURES_tune-cortexa7hf-neon ?= "${TUNE_FEATURES_tune-armv7ahf-neon} cortexa7"
-PACKAGE_EXTRA_ARCHS_tune-cortexa7hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf}"
-PACKAGE_EXTRA_ARCHS_tune-cortexa7thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf}"
-PACKAGE_EXTRA_ARCHS_tune-cortexa7hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon}"
+TUNE_FEATURES_tune-cortexa7thf-neon ?= "${TUNE_FEATURES_tune-armv7athf-neon} cortexa7"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf} cortexa7hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} cortexa7hf-vfp cortexa7t2hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon} cortexa7hf-vfp cortexa7hf-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7thf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon} cortexa7hf-vfp cortexa7hf-vfp-neon cortexa7t2hf-vfp cortexa7t2hf-vfp-neon"

conf/machine/include/tune-cortexa8.inc

@@ -0,0 +1,36 @@
+DEFAULTTUNE ?= "armv7a-neon"
+
+require conf/machine/include/arm/arch-armv7a.inc
+
+TUNEVALID[cortexa8] = "Enable Cortex-A8 specific processor optimizations"
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa8", "-mtune=cortex-a8", "", d)}"
+
+# Little Endian base configs
+AVAILTUNES += "cortexa8 cortexa8t cortexa8-neon cortexa8t-neon"
+ARMPKGARCH_tune-cortexa8 = "cortexa8"
+ARMPKGARCH_tune-cortexa8t = "cortexa8"
+ARMPKGARCH_tune-cortexa8-neon = "cortexa8"
+ARMPKGARCH_tune-cortexa8t-neon = "cortexa8"
+TUNE_FEATURES_tune-cortexa8 = "${TUNE_FEATURES_tune-armv7a} cortexa8"
+TUNE_FEATURES_tune-cortexa8t = "${TUNE_FEATURES_tune-armv7at} cortexa8"
+TUNE_FEATURES_tune-cortexa8-neon = "${TUNE_FEATURES_tune-armv7a-neon} cortexa8"
+TUNE_FEATURES_tune-cortexa8t-neon = "${TUNE_FEATURES_tune-armv7at-neon} cortexa8"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a} cortexa8-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} cortexa8-vfp cortexa8t2-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} cortexa8-vfp cortexa8-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8t-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7at-neon} cortexa8-vfp cortexa8-vfp-neon cortexa8t2-vfp cortexa8t2-vfp-neon"
+
+# VFP Tunes
+AVAILTUNES += "cortexa8hf cortexa8thf cortexa8hf-neon cortexa8thf-neon"
+ARMPKGARCH_tune-cortexa8hf = "cortexa8"
+ARMPKGARCH_tune-cortexa8thf = "cortexa8"
+ARMPKGARCH_tune-cortexa8hf-neon = "cortexa8"
+ARMPKGARCH_tune-cortexa8thf-neon = "cortexa8"
+TUNE_FEATURES_tune-cortexa8hf ?= "${TUNE_FEATURES_tune-armv7ahf} cortexa8"
+TUNE_FEATURES_tune-cortexa8thf ?= "${TUNE_FEATURES_tune-armv7athf} cortexa8"
+TUNE_FEATURES_tune-cortexa8hf-neon ?= "${TUNE_FEATURES_tune-armv7ahf-neon} cortexa8"
+TUNE_FEATURES_tune-cortexa8thf-neon ?= "${TUNE_FEATURES_tune-armv7athf-neon} cortexa8"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf} cortexa8hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} cortexa8hf-vfp cortexa8t2hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon} cortexa8hf-vfp cortexa8hf-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8thf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon} cortexa8hf-vfp cortexa8hf-vfp-neon cortexa8t2hf-vfp cortexa8t2hf-vfp-neon"

conf/machine/include/tune-cortexa9.inc

@@ -0,0 +1,36 @@
+DEFAULTTUNE ?= "armv7a-neon"
+
+require conf/machine/include/arm/arch-armv7a.inc
+
+TUNEVALID[cortexa9] = "Enable Cortex-A9 specific processor optimizations"
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa9", "-mtune=cortex-a9", "", d)}"
+
+# Little Endian base configs
+AVAILTUNES += "cortexa9 cortexa9t cortexa9-neon cortexa9t-neon"
+ARMPKGARCH_tune-cortexa9 = "cortexa9"
+ARMPKGARCH_tune-cortexa9t = "cortexa9"
+ARMPKGARCH_tune-cortexa9-neon = "cortexa9"
+ARMPKGARCH_tune-cortexa9t-neon = "cortexa9"
+TUNE_FEATURES_tune-cortexa9 = "${TUNE_FEATURES_tune-armv7a} cortexa9"
+TUNE_FEATURES_tune-cortexa9t = "${TUNE_FEATURES_tune-armv7at} cortexa9"
+TUNE_FEATURES_tune-cortexa9-neon = "${TUNE_FEATURES_tune-armv7a-neon} cortexa9"
+TUNE_FEATURES_tune-cortexa9t-neon = "${TUNE_FEATURES_tune-armv7at-neon} cortexa9"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a} cortexa9-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} cortexa9-vfp cortexa9t2-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} cortexa9-vfp cortexa9-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9t-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7at-neon} cortexa9-vfp cortexa9-vfp-neon cortexa9t2-vfp cortexa9t2-vfp-neon"
+
+# VFP Tunes
+AVAILTUNES += "cortexa9hf cortexa9thf cortexa9hf-neon cortexa9thf-neon"
+ARMPKGARCH_tune-cortexa9hf = "cortexa9"
+ARMPKGARCH_tune-cortexa9thf = "cortexa9"
+ARMPKGARCH_tune-cortexa9hf-neon = "cortexa9"
+ARMPKGARCH_tune-cortexa9thf-neon = "cortexa9"
+TUNE_FEATURES_tune-cortexa9hf ?= "${TUNE_FEATURES_tune-armv7ahf} cortexa9"
+TUNE_FEATURES_tune-cortexa9thf ?= "${TUNE_FEATURES_tune-armv7athf} cortexa9"
+TUNE_FEATURES_tune-cortexa9hf-neon ?= "${TUNE_FEATURES_tune-armv7ahf-neon} cortexa9"
+TUNE_FEATURES_tune-cortexa9thf-neon ?= "${TUNE_FEATURES_tune-armv7athf-neon} cortexa9"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf} cortexa9hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} cortexa9hf-vfp cortexa9t2hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon} cortexa9hf-vfp cortexa9hf-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9thf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon} cortexa9hf-vfp cortexa9hf-vfp-neon cortexa9t2hf-vfp cortexa9t2hf-vfp-neon"

conf/machine/keystone-evm.conf

@@ -2,22 +2,26 @@
 #@NAME: Keystone 2 machine
 #@DESCRIPTION: Machine configuration for the TI Keystone 2
 
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-video-fbdev"
-
-GUI_MACHINE_CLASS = "bigscreen"
-
 require conf/machine/include/keystone.inc
-#EXTRA_IMAGEDEPENDS = "u-boot"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-keystone"
+IMAGE_FSTYPES += "ubi tar.gz cpio"
 
-IMAGE_FSTYPES += "tar.bz2"
+SERIAL_CONSOLE = "115200 ttyS0"
 
-SERIAL_CONSOLE = "115200 ttyO0"
+SYSVINIT_ENABLED_GETTYS = ""
 
-UBOOT_MACHINE = "tci6638_evm_config"
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 857 LEBs
+# MKUBIFS_ARGS = "-m 2048 -e 129024 -c 857"
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 857"
 
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              2048
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048"

conf/machine/omap3-touchbook.conf

@@ -1,49 +0,0 @@
-#@TYPE: Machine
-#@NAME: Always Innovating touchbook
-#@DESCRIPTION: Machine configuration for the http://www.alwaysinnovating.com/touchbook/
-TARGET_ARCH = "arm"
-
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-input-tslib \
-           xf86-video-fbdev \
-           xf86-video-omapfb \
-           xf86-input-keyboard"
-
-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/omap3.inc
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
-
-IMAGE_FSTYPES += "tar.bz2"
-EXTRA_IMAGECMD_jffs2 = "-lnp "
-
-# Guesswork
-SERIAL_CONSOLE = "115200 ttyS2"
-
-UBOOT_MACHINE = "omap3_beagle_config"
-XLOAD_MACHINE = "beagleboard_config"
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# From dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: logical eraseblock size:    129024 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 1996 LEBs
-MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# from dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: physical eraseblock size:   131072 bytes (128 KiB)
-# UBI: sub-page size:              512
-UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
-
-
-
-# and sdio
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa touchscreen"

conf/machine/omap3evm.conf

@@ -1,23 +1,15 @@
 #@TYPE: Machine
 #@NAME: OMAP3 EVM
 #@DESCRIPTION: Machine configuration for the TI OMAP3 EVM
-TARGET_ARCH = "arm"
-
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-input-tslib \
-           xf86-video-omapfb \
-           xf86-input-keyboard"
-
-GUI_MACHINE_CLASS = "smallscreen"
 
 require conf/machine/include/omap3.inc
 
-# Ship all kernel modules
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen ethernet"
 
-IMAGE_FSTYPES += "jffs2 tar.bz2"
+IMAGE_FSTYPES += "jffs2 tar.gz"
 EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 
 SERIAL_CONSOLE = "115200 ttyS0"
@@ -25,16 +17,9 @@ USE_VT = "0"
 
 PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
 
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
-
-UBOOT_ARCH = "arm"
-UBOOT_MACHINE = "omap3_evm_config"
-XLOAD_MACHINE = "omap3evm_config"
-
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"
+EXTRA_IMAGEDEPENDS += "x-load"
 
 # NOTE: there are NAND and OneNAND versions of this board...
-
 # do ubiattach /dev/ubi_ctrl -m 4
 # From dmesg:
 # UBI: smallest flash I/O unit:    2048
@@ -49,4 +34,3 @@ MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
 # UBI: physical eraseblock size:   131072 bytes (128 KiB)
 # UBI: sub-page size:              512
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
-

conf/machine/omap5-evm.conf

@@ -0,0 +1,36 @@
+#@TYPE: Machine
+#@NAME: OMAP5 EVM
+#@DESCRIPTION: Machine configuration for the TI OMAP5 uEVM
+
+require conf/machine/include/omap-a15.inc
+
+IMAGE_FSTYPES += "ubi tar.gz"
+
+SERIAL_CONSOLE = "115200 ttyO2"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1988 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3836"
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+# UBI: VID header offset:          2048 (aligned 2048)
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
+
+UBOOT_MACHINE = "omap5_uevm_config"
+
+# Currently removing the sgx machine feature because there is no SGX package
+# available for omap5
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"

conf/machine/pandaboard.conf

@@ -4,15 +4,11 @@
 
 require conf/machine/include/omap4.inc
 
-UBOOT_MACHINE = "omap4_panda_config"
-
 GUI_MACHINE_CLASS = "bigscreen"
 
-IMAGE_FSTYPES += "tar.bz2"
+IMAGE_FSTYPES += "tar.gz"
 
 SERIAL_CONSOLE = "115200 ttyO2"
 
 MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
-MACHINE_FEATURES = "kernel26 wifi bluetooth alsa apm ext2 screen touchscreen usbgadget usbhost vfat"
-
-
+MACHINE_FEATURES = "kernel26 wifi bluetooth alsa apm ext2 screen usbgadget usbhost vfat sgx"

recipes-bsp/boot-monitor/boot-monitor_git.bb

@@ -0,0 +1,39 @@
+DESCRIPTION = "Boot Monitor - TI ARM Boot monitor code"
+EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}"
+
+LICENSE = "BSD"
+
+BOOT_MONITOR_BINARY ?= "skern.bin"
+BOOT_MONITOR_IMAGE  ?= "skern-${MACHINE}.bin"
+BOOT_MONITOR_MAKE_TARGET  ?= "all"
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=25fe219a6febf6e5bb45beda1b2eb315"
+
+COMPATIBLE_MACHINE = "keystone-evm"
+
+SRC_URI = "git://arago-project.org/git/projects/boot-monitor.git;protocol=git;branch=${BRANCH}"
+
+PV = "1.0"
+PR = "r1+gitr${SRCPV}"
+
+BRANCH = "master"
+
+S = "${WORKDIR}/git"
+
+SRCREV = "DEV.MCSDK-03.00.00.07"
+
+do_compile () {
+	unset LDFLAGS
+	unset CFLAGS
+	unset CPPFLAGS
+	oe_runmake ${BOOT_MONITOR_MAKE_TARGET}
+}
+
+inherit deploy
+
+addtask deploy before do_build after do_compile
+
+do_deploy () {
+	install -d ${DEPLOYDIR}
+	install ${S}/${BOOT_MONITOR_BINARY} ${DEPLOYDIR}/${BOOT_MONITOR_IMAGE}
+}

recipes-bsp/powervr-drivers/omap3-sgx-modules_4.08.00.01.bb

@@ -0,0 +1,56 @@
+DESCRIPTION = "Kernel drivers for the PowerVR SGX chipset found in the omap3 SoCs"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=ea5743acf520dd81ca172e69f818a3d4"
+
+TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
+require ../../recipes-ti/includes/ti-eula-unpack.inc
+
+SGXPV = "4_08_00_01"
+IMGPV = "1.9.2139099"
+BINFILE = "Graphics_SDK_setuplinux_${SGXPV}.bin"
+
+inherit module
+
+MACHINE_KERNEL_PR_append = "a"
+PR = "${MACHINE_KERNEL_PR}"
+
+DEFAULT_PREFERENCE = "-1"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE}"
+
+SRC_URI[md5sum] = "dd0d994a48ecc4293f272a1fddddf159"
+SRC_URI[sha256sum] = "fd721288c95314e0d676dd89462e1dec994e185cb608bcb8ac4a4b5809f9693a"
+
+TI_BIN_UNPK_WDEXT="/Graphics_SDK_${SGXPV}"
+S = "${WORKDIR}${TI_BIN_UNPK_WDEXT}/GFX_Linux_KM"
+
+PVRBUILD = "release"
+export KERNELDIR = "${STAGING_KERNEL_DIR}"
+
+INHIBIT_PACKAGE_STRIP = "1"
+
+TI_PLATFORM_omap3 = "omap3630"
+TI_PLATFORM_ti814x = "ti81xx"
+TI_PLATFORM_ti816x = "ti81xx"
+TI_PLATFORM_ti33x = "ti335x"
+
+MODULESLOCATION_omap3 = "dc_omapfb3_linux"
+MODULESLOCATION_ti814x = "dc_ti81xx_linux"
+MODULESLOCATION_ti816x = "dc_ti81xx_linux"
+MODULESLOCATION_ti33x = "dc_ti335x_linux"
+
+export SUPPORT_XORG ?= "${@base_contains('DISTRO_FEATURES', 'x11', '1', '0', d)}"
+
+MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=${SUPPORT_XORG}"
+
+do_install() {
+    mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+    cp  ${S}/pvrsrvkm.ko \
+        ${S}/services4/3rdparty/${MODULESLOCATION}/omaplfb.ko  \
+        ${S}/services4/3rdparty/bufferclass_ti/bufferclass_ti.ko \
+        ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+
+    if [ "${SUPPORT_XORG}" = "1" ]; then
+        cp ${S}/services4/3rdparty/linux_drm/drm.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+    fi
+}

recipes-bsp/powervr-drivers/omap3-sgx-modules_4.08.00.02.bb

@@ -0,0 +1,56 @@
+DESCRIPTION = "Kernel drivers for the PowerVR SGX chipset found in the omap3 SoCs"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=ea5743acf520dd81ca172e69f818a3d4"
+
+TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
+require ../../recipes-ti/includes/ti-eula-unpack.inc
+
+SGXPV = "4_08_00_02"
+IMGPV = "1.9.2188537"
+BINFILE = "Graphics_SDK_setuplinux_${SGXPV}_minimal_demos.bin"
+
+inherit module
+
+MACHINE_KERNEL_PR_append = "a"
+PR = "${MACHINE_KERNEL_PR}"
+
+DEFAULT_PREFERENCE = "-1"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE}"
+
+SRC_URI[md5sum] = "0efa3a38266e6f41f8cc4fad0187f0d6"
+SRC_URI[sha256sum] = "c732044b515a598e1fab661b7463aa9c53d4fa37f4980dfa85cd02b7468d0cd9"
+
+TI_BIN_UNPK_WDEXT="/Graphics_SDK_${SGXPV}"
+S = "${WORKDIR}${TI_BIN_UNPK_WDEXT}/GFX_Linux_KM"
+
+PVRBUILD = "release"
+export KERNELDIR = "${STAGING_KERNEL_DIR}"
+
+INHIBIT_PACKAGE_STRIP = "1"
+
+TI_PLATFORM_omap3 = "omap3630"
+TI_PLATFORM_ti814x = "ti81xx"
+TI_PLATFORM_ti816x = "ti81xx"
+TI_PLATFORM_ti33x = "ti335x"
+
+MODULESLOCATION_omap3 = "dc_omapfb3_linux"
+MODULESLOCATION_ti814x = "dc_ti81xx_linux"
+MODULESLOCATION_ti816x = "dc_ti81xx_linux"
+MODULESLOCATION_ti33x = "dc_ti335x_linux"
+
+export SUPPORT_XORG ?= "${@base_contains('DISTRO_FEATURES', 'x11', '1', '0', d)}"
+
+MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=${SUPPORT_XORG}"
+
+do_install() {
+    mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+    cp  ${S}/pvrsrvkm.ko \
+        ${S}/services4/3rdparty/${MODULESLOCATION}/omaplfb.ko  \
+        ${S}/services4/3rdparty/bufferclass_ti/bufferclass_ti.ko \
+        ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+
+    if [ "${SUPPORT_XORG}" = "1" ]; then
+        cp ${S}/services4/3rdparty/linux_drm/drm.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+    fi
+}

recipes-bsp/powervr-drivers/omap3-sgx-modules_4.09.00.01.bb

@@ -0,0 +1,56 @@
+DESCRIPTION = "Kernel drivers for the PowerVR SGX chipset found in the omap3 SoCs"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=ea5743acf520dd81ca172e69f818a3d4"
+
+TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
+require ../../recipes-ti/includes/ti-eula-unpack.inc
+
+SGXPV = "4_09_00_01"
+IMGPV = "1.9.2188537"
+BINFILE = "Graphics_SDK_setuplinux_${SGXPV}_minimal_demos.bin"
+
+inherit module
+
+MACHINE_KERNEL_PR_append = "a"
+PR = "${MACHINE_KERNEL_PR}"
+
+DEFAULT_PREFERENCE = "-1"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE}"
+
+SRC_URI[md5sum] = "bd35e9d8843aff3a2aca9d41e7db1c7d"
+SRC_URI[sha256sum] = "eb37f75ddde4640b09e760fa86e689beb394330ecdf68786188c34f249247647"
+
+TI_BIN_UNPK_WDEXT="/Graphics_SDK_${SGXPV}"
+S = "${WORKDIR}${TI_BIN_UNPK_WDEXT}/GFX_Linux_KM"
+
+PVRBUILD = "release"
+export KERNELDIR = "${STAGING_KERNEL_DIR}"
+
+INHIBIT_PACKAGE_STRIP = "1"
+
+TI_PLATFORM_omap3 = "omap3630"
+TI_PLATFORM_ti814x = "ti81xx"
+TI_PLATFORM_ti816x = "ti81xx"
+TI_PLATFORM_ti33x = "ti335x"
+
+MODULESLOCATION_omap3 = "dc_omapfb3_linux"
+MODULESLOCATION_ti814x = "dc_ti81xx_linux"
+MODULESLOCATION_ti816x = "dc_ti81xx_linux"
+MODULESLOCATION_ti33x = "dc_ti335x_linux"
+
+export SUPPORT_XORG ?= "${@base_contains('DISTRO_FEATURES', 'x11', '1', '0', d)}"
+
+MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=${SUPPORT_XORG}"
+
+do_install() {
+    mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+    cp  ${S}/pvrsrvkm.ko \
+        ${S}/services4/3rdparty/${MODULESLOCATION}/omaplfb.ko  \
+        ${S}/services4/3rdparty/bufferclass_ti/bufferclass_ti.ko \
+        ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+
+    if [ "${SUPPORT_XORG}" = "1" ]; then
+        cp ${S}/services4/3rdparty/linux_drm/drm.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+    fi
+}

recipes-bsp/pru/ti-pru-sw-edma-driver_1.00.00.bb

@@ -0,0 +1,32 @@
+DESCRIPTION = "Builds eDMA module used by eDMA libraries for PRU sw example applications"
+HOMEPAGE = "https://gforge.ti.com/gf/project/pru_sw/"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://edmautils.c;beginline=1;endline=23;md5=312e9cb8a37a044c617c98a9e980ad1b"
+
+COMPATIBLE_MACHINE = "omapl138"
+
+INHIBIT_PACKAGE_STRIP = "1"
+
+MACHINE_KERNEL_PR_append = "a+svnr${SRCPV}"
+PR = "${MACHINE_KERNEL_PR}"
+
+SRC_URI = "svn://gforge.ti.com/svn/pru_sw/;module=trunk;protocol=https;user=anonymous;pswd=''"
+
+SRCREV = "33"
+
+S = "${WORKDIR}/trunk/peripheral_lib/edma_driver/module"
+
+inherit module
+
+EXTRA_OEMAKE += "KERNEL_DIR='${STAGING_KERNEL_DIR}'"
+
+do_compile_prepend () {
+        export CCTOOL_PREFIX="${TOOLCHAIN_PATH}/bin/${TARGET_PREFIX}"
+}
+
+do_install () {
+        install -d ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/pru
+        install -m 0755 ${S}/edmautils.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/pru/
+}
+
+FILES_${PN} = "/lib/modules/${KERNEL_VERSION}/kernel/drivers/pru/edmautils.ko"

recipes-bsp/ti-ocf-crypto-module/ti-ocf-crypto-module_1.0.bb

@@ -0,0 +1,36 @@
+DESCRIPTION = "Builds Crypto module used by OCF-Linux driver in OpenSSL example applications"
+HOMEPAGE = "https://gforge.ti.com/gf/project/arm_crypto/"
+LICENSE = "BSD & GPLv2"
+LIC_FILES_CHKSUM = "file://Makefile;beginline=1;endline=16;md5=acc0590f80e72fd64ad5c16cad8f4f76 \
+                    file://ocf_omap3_crypto.c;beginline=436;endline=438;md5=a52cad5c37c3aa3f27c6391552967304"
+
+COMPATIBLE_MACHINE = "am37x-evm|am3517-evm"
+
+DEPENDS += "virtual/kernel"
+
+SRC_URI = "svn://gforge.ti.com/svn/arm_crypto/;module=trunk;protocol=https;user=anonymous;pswd=''"
+
+#gforge source revision
+SRCREV = "17"
+
+INHIBIT_PACKAGE_STRIP = "1"
+
+S = "${WORKDIR}/trunk"
+
+inherit module
+
+MACHINE_KERNEL_PR_append = "a+svnr${SRCPV}"
+PR = "${MACHINE_KERNEL_PR}"
+
+EXTRA_OEMAKE += "KERNEL_DIR=${STAGING_KERNEL_DIR}"
+
+do_compile_prepend () {
+    sed -i "s/arm-none-linux-gnueabi-/${TARGET_PREFIX}/g" ${S}/Makefile
+}
+
+do_install () {
+        install -d ${D}/lib/modules/${KERNEL_VERSION}/crypto/ocf/
+        install -m 0755 ${S}/ocf_omap3_cryptok.ko ${D}/lib/modules/${KERNEL_VERSION}/crypto/ocf/
+}
+
+FILES_${PN} = "/lib/modules/${KERNEL_VERSION}/crypto/ocf/ocf_omap3_cryptok.ko"

recipes-bsp/ti/am33x-cm3/init-am33x-cm3

@@ -0,0 +1,6 @@
+#!/bin/sh
+
+# Load the PM CM3 firmware
+echo 1 > /sys/devices/ocp.2/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/loading
+cat /lib/firmware/am335x-pm-firmware.bin > /sys/devices/ocp.2/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/data
+echo 0 > /sys/devices/ocp.2/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/loading

recipes-bsp/ti/am33x-cm3_git.bb

@@ -3,10 +3,21 @@ DESCRIPTION = "Cortex-M3 binary blob for suspend-resume"
 LICENSE = "TI-BSD"
 LIC_FILES_CHKSUM = "file://License.txt;md5=858099c817e47ea63559fc6b67ae8d91"
 
-PV = "04.06.00.07"
-SRCREV = "cf07b841d6e8c5e026eecb259d143f3dff412c8e"
+PV = "04.06.00.10"
+PR = "r2"
 
-SRC_URI = "git://arago-project.org/git/projects/am33x-cm3.git"
+# SRCREV corresponds to tag "AM335xPSP_04.06.00.10-rc1"
+SRCREV = "27ca4643e422245a95723de1df0247a00eada45b"
+BRANCH ?= "master"
+
+INITSCRIPT_NAME = "am335x-pm-firmware-load"
+INITSCRIPT_PARAMS = "defaults 96"
+
+inherit update-rc.d
+
+SRC_URI = "git://arago-project.org/git/projects/am33x-cm3.git;protocol=git;branch=${BRANCH} \
+           file://init-am33x-cm3 \
+          "
 
 S = "${WORKDIR}/git"
 
@@ -17,7 +28,11 @@ do_compile() {
 do_install() {
 	install -d ${D}${base_libdir}/firmware
 	install -m 0644 bin/am335x-pm-firmware.bin ${D}${base_libdir}/firmware/
+
+	# Install the init script to load the PM firmware at boot
+	install -d ${D}${sysconfdir}/init.d
+	install -m 0755 ${WORKDIR}/init-am33x-cm3 ${D}${sysconfdir}/init.d/${INITSCRIPT_NAME}
 }
 
-FILES_${PN} = "${base_libdir}/firmware"
+FILES_${PN} += "${base_libdir}/firmware"
 

recipes-bsp/u-boot/u-boot-am180x-2010.12/am180x-evm/0001-da850evm-change-default-memory-to-not-limit-at-32MB.patch

@@ -0,0 +1,34 @@
+From df5c87c4e1be1670475eba1187301a2f7a7aca30 Mon Sep 17 00:00:00 2001
+From: Chase Maupin <Chase.Maupin@ti.com>
+Date: Wed, 22 Jun 2011 12:12:09 -0500
+Subject: [PATCH] da850evm: change default memory to not limit at 32MB
+
+* Change the default mem= option passed to the Linux kernel to
+  not limit the memory to 32MB.
+* This change is used by AM devices that do not need to reserve
+  space for the DSP image.  By removing the mem= option we get
+  access to all of the memory on the system.
+* Limiting the memory to 32MB causes out-of-memory errors
+  when running large applications such as web browsers
+
+Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
+---
+ include/configs/da850evm.h |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
+index 4a1e0af..55badc9 100755
+--- a/include/configs/da850evm.h
++++ b/include/configs/da850evm.h
+@@ -184,7 +184,7 @@
+ #define CONFIG_CMDLINE_TAG
+ #define CONFIG_REVISION_TAG
+ #define CONFIG_SETUP_MEMORY_TAGS
+-#define CONFIG_BOOTARGS		"mem=32M console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootwait ip=off"
++#define CONFIG_BOOTARGS		"console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootwait ip=off"
+ #define CONFIG_BOOTCOMMAND	"if mmc rescan 0; then if fatload mmc 0 0xc0600000 boot.scr; then source 0xc0600000; else fatload mmc 0 0xc0700000 uImage; bootm c0700000; fi; else sf probe 0; sf read 0xc0700000 0x80000 0x220000; bootm 0xc0700000; fi"
+ #define CONFIG_BOOTDELAY	3
+ 
+-- 
+1.7.0.4
+

recipes-bsp/u-boot/u-boot-am180x_2010.12.bb

@@ -0,0 +1,22 @@
+require u-boot-ti.inc
+
+DESCRIPTION = "u-boot bootloader for AM180x devices"
+LIC_FILES_CHKSUM = "file://COPYING;md5=4c6cde5df68eff615d36789dc18edd3b"
+
+COMPATIBLE_MACHINE = "am180x-evm"
+
+PR = "r0"
+
+SRC_URI = "git://arago-project.org/git/projects/u-boot-davinci.git;protocol=git;branch=${BRANCH}"
+
+# For the am180x we want to enable all the memory on the EVM, but for other
+# devices that use the DSP we do not want this change because that memory
+# is used for the DSP
+SRC_URI_append_am180x-evm = " file://0001-da850evm-change-default-memory-to-not-limit-at-32MB.patch"
+
+BRANCH = "03.21.00.03"
+
+# v2010.12_DAVINCIPSP_03.21.00.04
+SRCREV = "1254a0b58d900b7035cfb36bf4e1b05dfbf09997"
+
+UBOOT_SUFFIX = "bin"

recipes-bsp/u-boot/u-boot-am33x_2011.10rc.bb

@@ -1,4 +1,4 @@
-require u-boot.inc
+require u-boot-ti.inc
 
 # No patches for other machines yet
 COMPATIBLE_MACHINE = "(ti33x)"
@@ -8,10 +8,7 @@ DEFAULT_PREFERENCE_ti33x = "99"
 PV = "2011.09+git"
 PR = "r30"
 
-# SPL build
-UBOOT_BINARY = "u-boot.img"
-UBOOT_IMAGE = "u-boot-${MACHINE}-${PV}-${PR}.img"
-UBOOT_SYMLINK = "u-boot-${MACHINE}.img"
+SPL_BINARY = "MLO"
 
 SRC_URI = "git://arago-project.org/git/projects/u-boot-am33x.git;protocol=git;branch=master \
            file://2011.09git/0001-am335x_evm-add-option-to-boot-kernel-from-boot-in-ex.patch \
@@ -28,8 +25,3 @@ SRC_URI = "git://arago-project.org/git/projects/u-boot-am33x.git;protocol=git;br
           "
 
 SRCREV = "dc52533ccff00a12761f793d66b39e4f6a4a3bba"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb"
-
-S = "${WORKDIR}/git"
-

recipes-bsp/u-boot/u-boot-am33x_2013.01.01.bb

@@ -0,0 +1,20 @@
+require u-boot-ti.inc
+
+DESCRIPTION = "u-boot bootloader for ARM MPU devices"
+
+COMPATIBLE_MACHINE = "ti33x"
+
+DEFAULT_PREFERENCE = "-1"
+
+PR = "r5+gitr${SRCPV}"
+
+SRC_URI = "git://git.ti.com/ti-u-boot/ti-u-boot.git;protocol=git;branch=${BRANCH}"
+
+# This version of u-boot is meant for 3.2 kernel which doesn't support device tree.
+BRANCH = "ti-u-boot-2013.01.01-amsdk-05.07.00.00"
+
+# Commit corresponds to tag "v2013.01.01_amsdk-05.07.00.00"
+SRCREV = "8eb15a787c558fee98b0fa2a66ff0849c732edcc"
+
+# Set the name of the SPL that will built so that it is also packaged with u-boot.
+SPL_BINARY = "MLO"

recipes-bsp/u-boot/u-boot-am3517_2011.09.bb

@@ -0,0 +1,19 @@
+require u-boot-ti.inc
+
+DESCRIPTION = "u-boot bootloader for ARM MPU devices"
+
+COMPATIBLE_MACHINE = "omap3"
+
+DEFAULT_PREFERENCE = "-1"
+
+PR = "r0+gitr${SRCPV}"
+
+SRC_URI = "git://arago-project.org/git/projects/u-boot-am33x.git;protocol=git;branch=${BRANCH}"
+
+BRANCH = "AM335XPSP_04.06.00.08"
+
+# Lock to the commit corresponding to tag "v2011.09_AM335xPSP_04.06.00.08"
+SRCREV = "1e4626f0d5f3bb04ec974e76a5d9029875269d31"
+
+# Set the name of the SPL that will built so that it is also packaged with u-boot.
+SPL_BINARY = "MLO"

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch

@@ -0,0 +1,172 @@
+From e0820ccc38315d88192c19e98ea9b59d3ec7d4c8 Mon Sep 17 00:00:00 2001
+From: Tom Rini <trini@ti.com>
+Date: Tue, 8 May 2012 07:29:31 +0000
+Subject: [PATCH] ARM: omap3: Set SPL stack size to 8KB, image to 54KB.
+
+With older toolchains it is possible to not fit entirely into the 45KB
+that we had assigned to SPL.  Adjust to allow for 8KB of stack (which
+should be more than required) and 54KB of text/data.
+
+Cc: Vaibhav Hiremath <hvaibhav@ti.com>
+Cc: Nagendra T S <nagendra@mistralsolutions.com>
+Cc: Thomas Weber <weber@corscience.de>
+Cc: Ilya Yanok <yanok@emcraft.com>
+Cc: Steve Sakoman <sakoman@gmail.com>
+Cc: Stefano Babic <sbabic@denx.de>
+Signed-off-by: Tom Rini <trini@ti.com>
+Acked-by: Stefano Babic <sbabic@denx.de>
+Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
+---
+ doc/SPL/README.omap3               |    4 ++--
+ include/configs/am3517_crane.h     |    2 +-
+ include/configs/am3517_evm.h       |    2 +-
+ include/configs/devkit8000.h       |    2 +-
+ include/configs/mcx.h              |    2 +-
+ include/configs/omap3_beagle.h     |    2 +-
+ include/configs/omap3_evm_common.h |    2 +-
+ include/configs/omap3_overo.h      |    2 +-
+ include/configs/tam3517-common.h   |    2 +-
+ include/configs/tricorder.h        |    2 +-
+ 10 files changed, 11 insertions(+), 11 deletions(-)
+
+diff --git a/doc/SPL/README.omap3 b/doc/SPL/README.omap3
+index cc5d5c0..a543e65 100644
+--- a/doc/SPL/README.omap3
++++ b/doc/SPL/README.omap3
+@@ -34,14 +34,14 @@ DDR1: 0x80000000 - 0xBFFFFFFF
+ 
+ Option 1 (SPL only):
+ 0x40200800 - 0x4020BBFF: Area for SPL text, data and rodata
+-0x4020BC00 - 0x4020FFFC: Area for the SPL stack.
++0x4020E000 - 0x4020FFFC: Area for the SPL stack.
+ 0x80000000 - 0x8007FFFF: Area for the SPL BSS.
+ 0x80100000: CONFIG_SYS_TEXT_BASE of U-Boot
+ 0x80208000 - 0x80307FFF: malloc() pool available to SPL.
+ 
+ Option 2 (SPL or X-Loader):
+ 0x40200800 - 0x4020BBFF: Area for SPL text, data and rodata
+-0x4020BC00 - 0x4020FFFC: Area for the SPL stack.
++0x4020E000 - 0x4020FFFC: Area for the SPL stack.
+ 0x80008000: CONFIG_SYS_TEXT_BASE of U-Boot
+ 0x87000000 - 0x8707FFFF: Area for the SPL BSS.
+ 0x87080000 - 0x870FFFFF: malloc() pool available to SPL.
+diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
+index 71321f3..1233985 100644
+--- a/include/configs/am3517_crane.h
++++ b/include/configs/am3517_crane.h
+@@ -325,7 +325,7 @@
+ #define CONFIG_SPL
+ #define CONFIG_SPL_NAND_SIMPLE
+ #define CONFIG_SPL_TEXT_BASE		0x40200800
+-#define CONFIG_SPL_MAX_SIZE		(45 * 1024)
++#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+ #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+ 
+ #define CONFIG_SPL_BSS_START_ADDR	0x80000000
+diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
+index bbd19de..ff8d1b0 100644
+--- a/include/configs/am3517_evm.h
++++ b/include/configs/am3517_evm.h
+@@ -324,7 +324,7 @@
+ #define CONFIG_SPL
+ #define CONFIG_SPL_NAND_SIMPLE
+ #define CONFIG_SPL_TEXT_BASE		0x40200800
+-#define CONFIG_SPL_MAX_SIZE		(45 * 1024)
++#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+ #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+ 
+ #define CONFIG_SPL_BSS_START_ADDR	0x80000000
+diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
+index eb7c376..248a5b2 100644
+--- a/include/configs/devkit8000.h
++++ b/include/configs/devkit8000.h
+@@ -324,7 +324,7 @@
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+ 
+ #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
+-#define CONFIG_SPL_MAX_SIZE		0xB400  /* 45 K */
++#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+ #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+ 
+ #define CONFIG_SPL_BSS_START_ADDR       0x80000500 /* leave space for bootargs*/
+diff --git a/include/configs/mcx.h b/include/configs/mcx.h
+index e190e3e..f6a83a8 100644
+--- a/include/configs/mcx.h
++++ b/include/configs/mcx.h
+@@ -325,7 +325,7 @@
+ #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+ 
+ #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
+-#define CONFIG_SPL_MAX_SIZE		(45 << 10)
++#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+ #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+ 
+ /* move malloc and bss high to prevent clashing with the main image */
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index ddeb414..6bdc2c3 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -399,7 +399,7 @@
+ #define CONFIG_SPL
+ #define CONFIG_SPL_NAND_SIMPLE
+ #define CONFIG_SPL_TEXT_BASE		0x40200800
+-#define CONFIG_SPL_MAX_SIZE		(45 * 1024)
++#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+ #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+ 
+ #define CONFIG_SPL_BSS_START_ADDR	0x80000000
+diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
+index 4910dda..47ebbef 100644
+--- a/include/configs/omap3_evm_common.h
++++ b/include/configs/omap3_evm_common.h
+@@ -282,7 +282,7 @@
+ /* Defines for SPL */
+ #define CONFIG_SPL
+ #define CONFIG_SPL_TEXT_BASE		0x40200800
+-#define CONFIG_SPL_MAX_SIZE		(45 * 1024)	/* 45 KB */
++#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+ #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+ 
+ #define CONFIG_SPL_BSS_START_ADDR	0x80000000
+diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
+index 64adc74..b0d144f 100644
+--- a/include/configs/omap3_overo.h
++++ b/include/configs/omap3_overo.h
+@@ -303,7 +303,7 @@
+ #define CONFIG_SPL
+ #define CONFIG_SPL_NAND_SIMPLE
+ #define CONFIG_SPL_TEXT_BASE		0x40200800
+-#define CONFIG_SPL_MAX_SIZE		(45 * 1024)
++#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+ #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+ 
+ /* move malloc and bss high to prevent clashing with the main image */
+diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
+index 37eb87b..3fc2c44 100644
+--- a/include/configs/tam3517-common.h
++++ b/include/configs/tam3517-common.h
+@@ -257,7 +257,7 @@
+ #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
+ 
+ #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
+-#define CONFIG_SPL_MAX_SIZE		(45 << 10)	/* 45 K */
++#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+ #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+ 
+ #define CONFIG_SYS_SPL_MALLOC_START	0x8f000000
+diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
+index 801a24f..ab911aa 100644
+--- a/include/configs/tricorder.h
++++ b/include/configs/tricorder.h
+@@ -293,7 +293,7 @@
+ #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+ 
+ #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
+-#define CONFIG_SPL_MAX_SIZE		0xB400  /* 45 K */
++#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
+ #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
+ 
+ #define CONFIG_SPL_BSS_START_ADDR	0x80000000 /*CONFIG_SYS_SDRAM_BASE*/
+-- 
+1.7.0.4
+

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch

@@ -0,0 +1,31 @@
+From 55161fca67023d6be30bdea495cc0fdbae316a64 Mon Sep 17 00:00:00 2001
+From: Tom Rini <trini@ti.com>
+Date: Wed, 9 Nov 2011 11:48:21 -0700
+Subject: [PATCH 1/4] OMAP3 Beagle: Set BOOTDELAY to 3
+
+This is TI Sitara SDK specific (unified user experience, 3s delay).
+
+Upstream-Status: Pending
+    * This will be submitted upstream by Tom Rini
+
+Signed-off-by: Tom Rini <trini@ti.com>
+---
+ include/configs/omap3_beagle.h |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index 58a29b8..ba73aa6 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -213,7 +213,7 @@
+ 							/* partition */
+ 
+ /* Environment information */
+-#define CONFIG_BOOTDELAY		2
++#define CONFIG_BOOTDELAY		3
+ 
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ 	"loadaddr=0x80200000\0" \
+-- 
+1.7.0.4
+

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-omap3_beagle-add-usbethaddr-setting-to-enable-networ.patch

@@ -0,0 +1,40 @@
+From c56786770eb0ccb95204cb72b961c44c65ff343b Mon Sep 17 00:00:00 2001
+From: Chase Maupin <Chase.Maupin@ti.com>
+Date: Thu, 17 May 2012 09:51:50 -0500
+Subject: [PATCH] omap3_beagle: add usbethaddr setting to enable networking
+
+* In order for the SMSC USB ethernet device to work the
+  usbethaddr setting must be set when the "usb start" command
+  is executed and the network device is discovered.
+* Currently set this for de:ad:be:ef until we can start
+  generating random or semi-random MAC addresses.
+* Based on work by Steve Kipisz and Joel Fernandez
+
+Upstream-Status: Not Upstreamable
+    * We cannot upstream this hard coded MAC address setting.
+    * User's should look at the following web page for information on
+      how to generate a MAC address, but this patch enables the out
+      of box experience for the SDK.
+        http://www.denx.de/wiki/view/DULG/WhereCanIGetAValidMACAddress
+
+
+Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
+---
+ include/configs/omap3_beagle.h |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index ddeb414..58a29b8 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -219,6 +219,7 @@
+ 	"loadaddr=0x80200000\0" \
+ 	"rdaddr=0x81000000\0" \
+ 	"usbtty=cdc_acm\0" \
++	"usbethaddr=de:ad:be:ef\0" \
+ 	"bootfile=uImage.beagle\0" \
+ 	"console=ttyO2,115200n8\0" \
+ 	"mpurate=auto\0" \
+-- 
+1.7.0.4
+

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-omap3_evm-Added-function-calls-to-set-volts-speed-on.patch

@@ -0,0 +1,146 @@
+From eff8924b57d21eadfe749e500617340b1a730c17 Mon Sep 17 00:00:00 2001
+From: Schuyler Patton <spatton@ti.com>
+Date: Thu, 30 Jun 2011 13:39:25 -0500
+Subject: [PATCH 1/3] omap3_evm: Added function calls to set volts, speed on OMAP36xx parts
+
+* evm.c
+
+*  Added setup calls to set voltage and speed
+
+*  Added calls in misc_init_r to twl4030_power_mpu_init and set_mpu_clock
+   functions. These set VDD1 to 1.35v and mpu clock to 1GHz respectively.
+   There is a check performed to make sure that this is only called on
+   omap36xx class parts.
+
+* twl4030.c
+
+* Added twl4030_power_mpu_init function to set VDD1 to 1.35 Volts
+
+* This is done to allow omap36xx parts to run at 1GHz.
+
+* clock.c
+
+* Added set_mpu_clk function to allow u-boot to set the clock
+  rate.
+
+* sys_proto.h
+
+* Added the function prototype set_mpu_clock
+
+* twl4030.h
+
+* Added twl4030_power_mpu_init function prototype
+
+Upstream-Status: Pending
+
+Signed-off-by: Schuyler Patton <spatton@ti.com>
+---
+ arch/arm/cpu/armv7/omap3/clock.c            |   15 +++++++++++++++
+ arch/arm/include/asm/arch-omap3/sys_proto.h |    2 ++
+ board/ti/evm/evm.c                          |    5 +++++
+ drivers/power/twl4030.c                     |   12 ++++++++++++
+ include/twl4030.h                           |    3 +++
+ 5 files changed, 37 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
+index 567817e..46a28a3 100644
+--- a/arch/arm/cpu/armv7/omap3/clock.c
++++ b/arch/arm/cpu/armv7/omap3/clock.c
+@@ -35,6 +35,21 @@
+ #include <command.h>
+ 
+ /******************************************************************************
++ * Setting the Clock speed 
++ *
++ *****************************************************************************/
++void set_mpu_clk(int speed)
++{
++	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
++
++
++	/* Set M */
++	sr32(&prcm_base->clksel1_pll_mpu, 8, 11, speed);
++	/* lock mode */
++	sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK);
++}
++
++/******************************************************************************
+  * get_sys_clk_speed() - determine reference oscillator speed
+  *                       based on known 32kHz clock and gptimer.
+  *****************************************************************************/
+diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h
+index 2a89e56..9db13d7 100644
+--- a/arch/arm/include/asm/arch-omap3/sys_proto.h
++++ b/arch/arm/include/asm/arch-omap3/sys_proto.h
+@@ -36,6 +36,8 @@ void prcm_init(void);
+ void per_clocks_enable(void);
+ void ehci_clocks_enable(void);
+ 
++void set_mpu_clk(int speed);
++
+ void memif_init(void);
+ void sdrc_init(void);
+ void do_sdrc_init(u32, u32);
+diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
+index 8497aee..91eb93d 100644
+--- a/board/ti/evm/evm.c
++++ b/board/ti/evm/evm.c
+@@ -39,6 +39,7 @@
+ #include <asm/mach-types.h>
+ #include <linux/mtd/nand.h>
+ #include "evm.h"
++#include <twl4030.h>
+ 
+ #define OMAP3EVM_GPIO_ETH_RST_GEN1		64
+ #define OMAP3EVM_GPIO_ETH_RST_GEN2		7
+@@ -177,6 +178,10 @@ int misc_init_r(void)
+ #endif
+ 	dieid_num_r();
+ 
++        if (get_cpu_family() == CPU_OMAP36XX) {
++   		twl4030_power_mpu_init();
++	        set_mpu_clk(500);
++	}
+ 	return 0;
+ }
+ 
+diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c
+index 36b2144..670b4cb 100644
+--- a/drivers/power/twl4030.c
++++ b/drivers/power/twl4030.c
+@@ -105,6 +105,18 @@ void twl4030_power_init(void)
+ 				TWL4030_PM_RECEIVER_DEV_GRP_P1);
+ }
+ 
++#define VDD1_VSEL_135	0x3C
++
++void twl4030_power_mpu_init(void)
++{
++        unsigned char byte;
++
++        /* 1.4 Volts */
++        byte = VDD1_VSEL_135;
++        twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
++                             TWL4030_PM_RECEIVER_VDD1_VSEL);
++}
++
+ void twl4030_power_mmc_init(void)
+ {
+ 	/* Set VMMC1 to 3.15 Volts */
+diff --git a/include/twl4030.h b/include/twl4030.h
+index 9cd32ab..91d36b8 100644
+--- a/include/twl4030.h
++++ b/include/twl4030.h
+@@ -510,6 +510,9 @@ static inline int twl4030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg)
+  * Power
+  */
+ 
++/*For setting VDD1  */
++void twl4030_power_mpu_init(void);
++
+ /* For hardware resetting */
+ void twl4030_power_reset_init(void);
+ /* For setting device group and voltage */
+-- 
+1.7.0.4
+

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0002-am335x-am3517evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch

@@ -0,0 +1,73 @@
+From 883551659d9b15dfb1ed7ad8ae4b34bfd1fa0fd9 Mon Sep 17 00:00:00 2001
+From: Tom Rini <trini@ti.com>
+Date: Wed, 16 Nov 2011 14:50:49 -0700
+Subject: [PATCH 2/4] am335x/am3517evm/beagleboard/am37x: Add CONFIG_CMD_ASKENV
+
+This is TI Sitara SDK specific (unified user experience, askenv command).
+
+Upstream-Status: Pending
+    * This will be submitted upstream by Tom Rini
+
+Signed-off-by: Tom Rini <trini@ti.com>
+---
+ include/configs/am335x_evm.h   |    2 ++
+ include/configs/am3517_evm.h   |    2 ++
+ include/configs/omap3_beagle.h |    2 ++
+ include/configs/omap3_evm.h    |    2 ++
+ 4 files changed, 8 insertions(+), 0 deletions(-)
+
+diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
+index d0fbc88..5cd7d6d 100644
+--- a/include/configs/am335x_evm.h
++++ b/include/configs/am335x_evm.h
+@@ -26,6 +26,8 @@
+ #include <asm/arch/cpu.h>
+ #include <asm/arch/hardware.h>
+ 
++#define CONFIG_CMD_ASKENV
++
+ #define CONFIG_ENV_SIZE			0x400
+ #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (8 * 1024))
+ #define CONFIG_SYS_PROMPT		"U-Boot# "
+diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
+index b5f75d1..2b3fce7 100644
+--- a/include/configs/am3517_evm.h
++++ b/include/configs/am3517_evm.h
+@@ -137,6 +137,8 @@
+ /* commands to include */
+ #include <config_cmd_default.h>
+ 
++#define CONFIG_CMD_ASKENV
++
+ #define CONFIG_CMD_EXT2		/* EXT2 Support			*/
+ #define CONFIG_CMD_FAT		/* FAT support			*/
+ #define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index ba73aa6..b270598 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -146,6 +146,8 @@
+ /* commands to include */
+ #include <config_cmd_default.h>
+ 
++#define CONFIG_CMD_ASKENV
++
+ #define CONFIG_CMD_CACHE
+ #define CONFIG_CMD_EXT2		/* EXT2 Support			*/
+ #define CONFIG_CMD_FAT		/* FAT support			*/
+diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
+index 1fcb7af..215d67d 100644
+--- a/include/configs/omap3_evm.h
++++ b/include/configs/omap3_evm.h
+@@ -42,6 +42,8 @@
+  */
+ #include <config_cmd_default.h>
+ 
++#define CONFIG_CMD_ASKENV
++
+ #define CONFIG_CMD_EXT2
+ #define CONFIG_CMD_FAT
+ #define CONFIG_CMD_JFFS2
+-- 
+1.7.0.4
+

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0002-omap3evm-Make-the-board-start-at-800MHz.patch

@@ -0,0 +1,36 @@
+From a0f4f7b85d004db36a24cc05e9c34f137186270b Mon Sep 17 00:00:00 2001
+From: Chase Maupin <Chase.Maupin@ti.com>
+Date: Wed, 23 May 2012 09:25:06 -0500
+Subject: [PATCH 2/3] omap3evm: Make the board start at 800MHz
+
+* It is safe to start the the 3630 silicon at 800MHz for all
+  revisions.  Go ahead and bump the speed to 800MHz during boot
+  instead of using the default 500MHz speed.
+* This patch was based on work by Tom Rini <trini@ti.com> at
+  http://arago-project.org/git/projects/?p=u-boot-am33x.git;a=commit;h=ad130035df754931f2939902e453cc3736412f5f
+
+Upstream-Status: Pending
+    * Will be submitted upstream since it is safe for all silicon
+      revisions to boot at 800MHz according to HW team.
+
+Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
+---
+ board/ti/evm/evm.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
+index 91eb93d..0d0b4a2 100644
+--- a/board/ti/evm/evm.c
++++ b/board/ti/evm/evm.c
+@@ -180,7 +180,7 @@ int misc_init_r(void)
+ 
+         if (get_cpu_family() == CPU_OMAP36XX) {
+    		twl4030_power_mpu_init();
+-	        set_mpu_clk(500);
++	        set_mpu_clk(800);
+ 	}
+ 	return 0;
+ }
+-- 
+1.7.0.4
+

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0003-beagleboard-Load-uImage-from-VFAT-by-default.patch

@@ -0,0 +1,34 @@
+From f2a15cd9e96648e05cb39159ba74cbfbfc8ff999 Mon Sep 17 00:00:00 2001
+From: Tom Rini <trini@ti.com>
+Date: Thu, 17 Nov 2011 08:41:42 -0700
+Subject: [PATCH 3/4] beagleboard: Load uImage from VFAT by default.
+
+This is TI Sitara SDK specific (unified user experience, load uImage
+from vfat).
+
+Upstream-Status: Not Appropriate
+    * This patch is to make the u-boot for beagleboard consistent
+      with other versions used in the AMSDK and doesn't make
+      sense up stream.
+
+Signed-off-by: Tom Rini <trini@ti.com>
+---
+ include/configs/omap3_beagle.h |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index b270598..ea62580 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -305,7 +305,7 @@
+ 			"echo Running uenvcmd ...;" \
+ 			"run uenvcmd;" \
+ 		"fi;" \
+-		"if run loaduimage; then " \
++		"if run loaduimagefat; then " \
+ 			"run mmcboot;" \
+ 		"fi;" \
+ 	"fi;" \
+-- 
+1.7.0.4
+

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0003-beagleboard-Make-xM-rev-C-go-to-800MHz.patch

@@ -0,0 +1,34 @@
+From 372d110126f37f9f8b7d4bbedd3f02cf80e587de Mon Sep 17 00:00:00 2001
+From: Tom Rini <trini@ti.com>
+Date: Wed, 30 Nov 2011 16:16:21 -0700
+Subject: [PATCH 3/3] beagleboard: Make xM rev C go to 800MHz
+
+* This is the highest frequency supported on xM without BIAS
+  drivers.
+
+Upstream-Status: Pending
+    * Will be submitted upstream since it is safe for all silicon
+      revisions to boot at 800MHz according to HW team.
+
+Signed-off-by: Tom Rini <trini@ti.com>
+---
+ board/ti/beagle/beagle.c |    3 +++
+ 1 files changed, 3 insertions(+), 0 deletions(-)
+
+diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
+index e26b387..69a7b4e 100644
+--- a/board/ti/beagle/beagle.c
++++ b/board/ti/beagle/beagle.c
+@@ -346,6 +346,9 @@ int misc_init_r(void)
+ 					TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
+ 					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
+ 					TWL4030_PM_RECEIVER_DEV_GRP_P1);
++		/* 800MHz support */
++		twl4030_power_mpu_init();
++		set_mpu_clk(800);
+ 		break;
+ 	default:
+ 		printf("Beagle unknown 0x%02x\n", get_board_revision());
+-- 
+1.7.0.4
+

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0004-beagleboard-Load-uImage-to-the-default-kernel-linux-.patch

@@ -0,0 +1,57 @@
+From 715afb049d2675106e26c5225e7e321374c32f85 Mon Sep 17 00:00:00 2001
+From: Tom Rini <trini@ti.com>
+Date: Thu, 17 Nov 2011 16:54:01 -0700
+Subject: [PATCH 4/4] beagleboard: Load uImage to the default kernel linux address
+
+This is TI Sitara SDK specific (unified user experience, load uImage
+to an 'XIP' location).
+
+Upstream-Status: Pending
+    * This functionality is being discussed upstream and there
+      is not a concensus yet.
+
+Signed-off-by: Tom Rini <trini@ti.com>
+---
+ include/configs/omap3_beagle.h |   13 +++++++------
+ 1 files changed, 7 insertions(+), 6 deletions(-)
+
+diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
+index ea62580..00b2abe 100644
+--- a/include/configs/omap3_beagle.h
++++ b/include/configs/omap3_beagle.h
+@@ -219,6 +219,7 @@
+ 
+ #define CONFIG_EXTRA_ENV_SETTINGS \
+ 	"loadaddr=0x80200000\0" \
++	"kloadaddr=0x80007fc0\0" \
+ 	"rdaddr=0x81000000\0" \
+ 	"usbtty=cdc_acm\0" \
+ 	"usbethaddr=de:ad:be:ef\0" \
+@@ -272,18 +273,18 @@
+ 		"root=${ramroot} " \
+ 		"rootfstype=${ramrootfstype}\0" \
+ 	"loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
+-	"loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+-	"loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} /boot/uImage\0" \
++	"loaduimagefat=fatload mmc ${mmcdev} ${kloadaddr} uImage\0" \
++	"loaduimage=ext2load mmc ${mmcdev}:2 ${kloadaddr} /boot/uImage\0" \
+ 	"mmcboot=echo Booting from mmc ...; " \
+ 		"run mmcargs; " \
+-		"bootm ${loadaddr}\0" \
++		"bootm ${kloadaddr}\0" \
+ 	"nandboot=echo Booting from nand ...; " \
+ 		"run nandargs; " \
+-		"nand read ${loadaddr} 280000 400000; " \
+-		"bootm ${loadaddr}\0" \
++		"nand read ${kloadaddr} 280000 400000; " \
++		"bootm ${kloadaddr}\0" \
+ 	"ramboot=echo Booting from ramdisk ...; " \
+ 		"run ramargs; " \
+-		"bootm ${loadaddr}\0" \
++		"bootm ${kloadaddr}\0" \
+ 	"userbutton=if gpio input 173; then run userbutton_xm; " \
+ 		"else run userbutton_nonxm; fi;\0" \
+ 	"userbutton_xm=gpio input 4;\0" \
+-- 
+1.7.0.4
+

recipes-bsp/u-boot/u-boot-am37x_2012.04.01.bb

@@ -0,0 +1,38 @@
+require u-boot-ti.inc
+
+DESCRIPTION = "u-boot bootloader for ARM MPU devices"
+
+COMPATIBLE_MACHINE = "am37x-evm|beagleboard"
+
+BRANCH ?= "master"
+
+# v2012.04.01
+SRCREV = "415d386877df49eb051b85ef74fa59a16dc17c7d"
+
+SRC_URI = "git://git.denx.de/u-boot.git;protocol=git;branch=${BRANCH}"
+
+# Add patches for the AMSDK
+#  - 0001-omap3-beagle-add-usbethaddr....Not for Upstream
+#  - 0001-OMAP3-Beagle-Set-BOOTDELAY....Pending Upstream
+#  - 0002-am335x-am3517evm-beagleboard....Pending Upstream
+#  - 0003-beagleboard-Load-uImage-from....Not for Upstream
+#  - 0004-beagleboard-Load-uImage-to....Pending Upstream
+#  - 0001-omap3_evm-Added-function....Pending Upstream
+#  - 0002-omap3evm-Make-the-board....Pending Upstream
+#  - 0003-beagleboard-Make-xM-rev....Pending Upstream
+#  - 0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch....Upstreamed
+
+# Add a patch to set a default usbethaddr address to enable the out of box
+# experience.
+SRC_URI += "file://0001-omap3_beagle-add-usbethaddr-setting-to-enable-networ.patch \
+            file://0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch \
+            file://0002-am335x-am3517evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch \
+            file://0003-beagleboard-Load-uImage-from-VFAT-by-default.patch \
+            file://0004-beagleboard-Load-uImage-to-the-default-kernel-linux-.patch \
+            file://0001-omap3_evm-Added-function-calls-to-set-volts-speed-on.patch \
+            file://0002-omap3evm-Make-the-board-start-at-800MHz.patch \
+            file://0003-beagleboard-Make-xM-rev-C-go-to-800MHz.patch \
+            file://0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch \
+            "
+
+SPL_BINARY = "MLO"

recipes-bsp/u-boot/u-boot-beagleboard_2011.09.bb

@@ -1,16 +1,13 @@
-require u-boot.inc
+require u-boot-ti.inc
 
 PR = "r7"
 
-# SPL build
-UBOOT_BINARY = "u-boot.img"
-UBOOT_IMAGE = "u-boot-${MACHINE}-${PV}-${PR}.img"
-UBOOT_SYMLINK = "u-boot-${MACHINE}.img"
+SPL_BINARY = "MLO"
 
 # No patches for other machines yet
 COMPATIBLE_MACHINE = "(beagleboard)"
 
-SRC_URI = "git://www.denx.de/git/u-boot.git;protocol=git \
+SRC_URI = "git://git.denx.de/u-boot.git;protocol=git \
            file://2011.09/0001-omap3-mem-Comment-enable_gpmc_cs_config-more.patch \
            file://2011.09/0002-OMAP3-Update-SDRC-dram_init-to-always-call-make_cs1_.patch \
            file://2011.09/0003-OMAP3-Add-a-helper-function-to-set-timings-in-SDRC.patch \
@@ -37,7 +34,3 @@ SRC_URI = "git://www.denx.de/git/u-boot.git;protocol=git \
           "
 
 SRCREV = "fdbe8b9a2d1858ba35dd6214315563ad44d4a0e3"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb"
-
-S = "${WORKDIR}/git"

recipes-bsp/u-boot/u-boot-keystone_2013.01.bb

@@ -0,0 +1,16 @@
+require u-boot-ti.inc
+
+DESCRIPTION = "u-boot bootloader for Multi-Core BU devices"
+
+COMPATIBLE_MACHINE = "keystone"
+
+PR = "r2+gitr${SRCPV}"
+
+SRC_URI = "git://arago-project.org/git/projects/u-boot-keystone.git;protocol=git;branch=${BRANCH}"
+
+BRANCH = "master"
+
+# DEV.MCSDK-03.00.00.07
+SRCREV = "82f40e857d853165310d0753e79235aefb65d7ba"
+
+UBOOT_SUFFIX = "bin"

recipes-bsp/u-boot/u-boot-ti-staging_2013.01.01.bb

@@ -0,0 +1,14 @@
+require u-boot-ti.inc
+
+DESCRIPTION = "u-boot bootloader for TI devices"
+
+PR = "r4+gitr${SRCPV}"
+
+SRC_URI = "git://git.ti.com/ti-u-boot/ti-u-boot.git;protocol=git;branch=${BRANCH}"
+
+BRANCH ?= "ti-u-boot-2013.01.01"
+
+# This commit corresponds to ti2013.04.00 release tag
+SRCREV = "7552b4c906b0a50fbc5225dc43ed0192618e9d5d"
+
+SPL_BINARY = "MLO"

recipes-bsp/u-boot/u-boot-ti.inc

@@ -0,0 +1,17 @@
+require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot.inc
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/u-boot:"
+
+LICENSE = "GPLv2+"
+LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+PROVIDES += "u-boot"
+PKG_${PN} = "u-boot"
+PKG_${PN}-dev = "u-boot-dev"
+PKG_${PN}-dbg = "u-boot-dbg"
+
+S = "${WORKDIR}/git"
+
+UBOOT_SUFFIX = "img"

recipes-bsp/u-boot/u-boot.inc

@@ -1,68 +0,0 @@
-DESCRIPTION = "U-Boot - the Universal Boot Loader"
-HOMEPAGE = "http://www.denx.de/wiki/U-Boot/WebHome"
-SECTION = "bootloaders"
-LICENSE = "GPLv2+"
-LIC_FILES_CHKSUM = "file://COPYING;md5=4c6cde5df68eff615d36789dc18edd3b"
-
-PROVIDES = "virtual/bootloader"
-
-DEPENDS = "mtd-utils"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-PARALLEL_MAKE=""
-
-EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}"
-
-UBOOT_MACHINE ?= "${MACHINE}_config"
-UBOOT_BINARY ?= "u-boot.bin"
-UBOOT_IMAGE ?= "u-boot-${MACHINE}-${PV}-${PR}.bin"
-UBOOT_SYMLINK ?= "u-boot-${MACHINE}.bin"
-UBOOT_MAKE_TARGET ?= "all"
-
-do_configure () {
-	oe_runmake ${UBOOT_MACHINE}
-}
-
-do_compile () {
-	unset LDFLAGS
-	unset CFLAGS
-	unset CPPFLAGS
-	oe_runmake ${UBOOT_MAKE_TARGET}
-}
-
-do_install () {
-	install -d ${D}/boot
-	install ${S}/${UBOOT_BINARY} ${D}/boot/${UBOOT_IMAGE}
-	ln -sf ${UBOOT_IMAGE} ${D}/boot/${UBOOT_BINARY}
-
-	if [ -e ${WORKDIR}/fw_env.config ] ; then
-		install -d ${D}${sysconfdir}
-		install -m 644 ${WORKDIR}/fw_env.config ${D}${sysconfdir}/fw_env.config
-	fi
-
-}
-
-FILES_${PN} = "/boot ${sysconfdir}"
-# no gnu_hash in uboot.bin, by design, so skip QA
-INSANE_SKIP_${PN} = "1"
-
-inherit deploy
-
-addtask deploy before do_package after do_compile
-
-do_deploy () {
-	install -d ${DEPLOY_DIR_IMAGE}
-	install ${S}/${UBOOT_BINARY} ${DEPLOY_DIR_IMAGE}/${UBOOT_IMAGE}
-
-	cd ${DEPLOY_DIR_IMAGE}
-	rm -f ${UBOOT_BINARY} ${UBOOT_SYMLINK}
-	ln -sf ${UBOOT_IMAGE} ${UBOOT_SYMLINK}
-	ln -sf ${UBOOT_IMAGE} ${UBOOT_BINARY}
-
-	if [ -e ${S}/MLO ] ; then
-		install ${S}/MLO ${DEPLOY_DIR_IMAGE}/MLO-${MACHINE}-${PV}
-		rm -f ${DEPLOY_DIR_IMAGE}/MLO-${MACHINE} ${DEPLOY_DIR_IMAGE}/MLO
-		ln -sf MLO-${MACHINE}-${PV} ${DEPLOY_DIR_IMAGE}/MLO-${MACHINE}
-		ln -sf MLO-${MACHINE}-${PV} ${DEPLOY_DIR_IMAGE}/MLO
-	fi
-}

recipes-bsp/u-boot/u-boot/2011.06/0001-OMAP3-Beagle-Pin-Mux-initialization-glitch-fix.patch

@@ -1,46 +0,0 @@
-From 8892464287ca16f90397f159370f0d42ff6dc879 Mon Sep 17 00:00:00 2001
-From: Bob Feretich <bob.feretich@rafresearch.com>
-Date: Thu, 24 Feb 2011 13:16:44 +0000
-Subject: [PATCH 01/30] OMAP3 Beagle Pin Mux initialization glitch fix
-
-The below patch reverses the order of two segments in the board file.
-Output pins need to have their values initialized, before they are
-exposed to the logic outside the chip.
-
-Signed-off-by: Bob Feretich <bob.feretich@rafresearch.com>
-Cc: Wolfgang Denk <wd@denx.de>
----
- board/ti/beagle/beagle.c |   12 ++++++------
- 1 files changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index ab50514..15d061a 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -301,17 +301,17 @@ int misc_init_r(void)
- 	twl4030_power_init();
- 	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
- 
--	/* Configure GPIOs to output */
--	writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
--	writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
--		GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
--
--	/* Set GPIOs */
-+	/* Set GPIO states before they are made outputs */
- 	writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1,
- 		&gpio6_base->setdataout);
- 	writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
- 		GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
- 
-+	/* Configure GPIOs to output */
-+	writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
-+	writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
-+		GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
-+
- 	dieid_num_r();
- 
- 	return 0;
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0002-OMAP-Remove-omapfb.debug-y-from-Beagle-and-Overo-env.patch

@@ -1,56 +0,0 @@
-From 88ee784eddb634074895d68572b896aebd10bb5d Mon Sep 17 00:00:00 2001
-From: Steve Sakoman <steve@sakoman.com>
-Date: Thu, 30 Dec 2010 07:19:44 +0000
-Subject: [PATCH 02/30] OMAP: Remove omapfb.debug=y from Beagle and Overo env settings
-
-The kernel DSS2 code is mature now, and keeping this setting hurts performance
-
-Signed-off-by: Steve Sakoman <steve@sakoman.com>
----
- include/configs/omap3_beagle.h |    2 --
- include/configs/omap3_overo.h  |    2 --
- 2 files changed, 0 insertions(+), 4 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 9fd80ed..42575f1 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -214,7 +214,6 @@
- 		"mpurate=${mpurate} " \
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
--		"omapfb.debug=y " \
- 		"omapdss.def_disp=${defaultdisplay} " \
- 		"root=${mmcroot} " \
- 		"rootfstype=${mmcrootfstype}\0" \
-@@ -222,7 +221,6 @@
- 		"mpurate=${mpurate} " \
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
--		"omapfb.debug=y " \
- 		"omapdss.def_disp=${defaultdisplay} " \
- 		"root=${nandroot} " \
- 		"rootfstype=${nandrootfstype}\0" \
-diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
-index 242b317..0f64054 100644
---- a/include/configs/omap3_overo.h
-+++ b/include/configs/omap3_overo.h
-@@ -170,7 +170,6 @@
- 		"mpurate=${mpurate} " \
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
--		"omapfb.debug=y " \
- 		"omapdss.def_disp=${defaultdisplay} " \
- 		"root=${mmcroot} " \
- 		"rootfstype=${mmcrootfstype}\0" \
-@@ -178,7 +177,6 @@
- 		"mpurate=${mpurate} " \
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
--		"omapfb.debug=y " \
- 		"omapdss.def_disp=${defaultdisplay} " \
- 		"root=${nandroot} " \
- 		"rootfstype=${nandrootfstype}\0" \
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0003-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch

@@ -1,57 +0,0 @@
-From 89231bb3ed75ea6801a10d3ea618c8dc83d7e483 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Mon, 22 Nov 2010 11:51:32 +0100
-Subject: [PATCH 03/30] OMAP3: beagle: pass expansionboard name in bootargs
-
----
- include/configs/omap3_beagle.h |   13 +++++++++++++
- 1 files changed, 13 insertions(+), 0 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 42575f1..d5f98da 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -202,6 +202,7 @@
- 	"usbtty=cdc_acm\0" \
- 	"console=ttyS2,115200n8\0" \
- 	"mpurate=auto\0" \
-+	"buddy=none "\
- 	"vram=12M\0" \
- 	"dvimode=1024x768MR-16@60\0" \
- 	"defaultdisplay=dvi\0" \
-@@ -212,6 +213,7 @@
- 	"nandrootfstype=jffs2\0" \
- 	"mmcargs=setenv bootargs console=${console} " \
- 		"mpurate=${mpurate} " \
-+		"buddy=${buddy} "\
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
- 		"omapdss.def_disp=${defaultdisplay} " \
-@@ -219,6 +221,7 @@
- 		"rootfstype=${mmcrootfstype}\0" \
- 	"nandargs=setenv bootargs console=${console} " \
- 		"mpurate=${mpurate} " \
-+		"buddy=${buddy} "\
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
- 		"omapdss.def_disp=${defaultdisplay} " \
-@@ -227,6 +230,16 @@
- 	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
- 	"importbootenv=echo Importing environment from mmc ...; " \
- 		"env import -t $loadaddr $filesize\0" \
-+	"ramargs=setenv bootargs console=${console} " \
-+		"${optargs} " \
-+		"mpurate=${mpurate} " \
-+		"buddy=${buddy} "\
-+		"vram=${vram} " \
-+		"omapfb.mode=dvi:${dvimode} " \
-+		"omapdss.def_disp=${defaultdisplay} " \
-+		"root=${ramroot} " \
-+		"rootfstype=${ramrootfstype}\0" \
-+	"loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
- 	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
- 	"mmcboot=echo Booting from mmc ...; " \
- 		"run mmcargs; " \
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0004-beagleboard-add-support-for-xM-revision-C.patch

@@ -1,47 +0,0 @@
-From 9890bd3e5a28645214aff9d8d311d6a5bdec6cf9 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Fri, 17 Jun 2011 09:37:37 +0200
-Subject: [PATCH 04/30] beagleboard: add support for xM revision C
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- board/ti/beagle/beagle.c |   10 ++++++++++
- board/ti/beagle/beagle.h |    1 +
- 2 files changed, 11 insertions(+), 0 deletions(-)
-
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index 15d061a..7768901 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -216,6 +216,16 @@ int misc_init_r(void)
- 					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
- 					TWL4030_PM_RECEIVER_DEV_GRP_P1);
- 		break;
-+	case REVISION_XM_C:
-+		printf("Beagle xM Rev C\n");
-+		setenv("beaglerev", "xMC");
-+		MUX_BEAGLE_XM();
-+		/* Set VAUX2 to 1.8V for EHCI PHY */
-+		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
-+					TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
-+					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
-+					TWL4030_PM_RECEIVER_DEV_GRP_P1);
-+		break;
- 	default:
- 		printf("Beagle unknown 0x%02x\n", get_board_revision());
- 		MUX_BEAGLE_XM();
-diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
-index a7401b1..04247cd 100644
---- a/board/ti/beagle/beagle.h
-+++ b/board/ti/beagle/beagle.h
-@@ -39,6 +39,7 @@ const omap3_sysinfo sysinfo = {
- #define REVISION_C4	0x5
- #define REVISION_XM_A	0x0
- #define REVISION_XM_B	0x1
-+#define REVISION_XM_C	0x2
- 
- /*
-  * IEN  - Input Enable
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0005-Add-support-for-SMSC95XX-USB-2.0-10-100MBit-Ethernet.patch

@@ -1,989 +0,0 @@
-From 00b6a679e3c739567f1383030cd61483a15555f8 Mon Sep 17 00:00:00 2001
-From: Simon Glass <sjg@chromium.org>
-Date: Mon, 13 Jun 2011 13:13:09 +0000
-Subject: [PATCH 05/30] Add support for SMSC95XX USB 2.0 10/100MBit Ethernet Adapter
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The SMSC95XX is a USB hub with a built-in Ethernet adapter. This adds support
-for this, using the USB host network framework.
-
-Changes for v2:
-- Coding style cleanup
-- Changed some comments as suggested
-
-Changes for v3:
-- Change turbo_mode to #define
-
-Changes for v4:
-- Dropped Tegra2 specific bit
-- Fixed a few broken bits in SMSC from my testing
-
-Changes for v5:
-- Code style clean-ups in SMSC
-- Cleaned up debugging of errors in SMSC driver
-
-Changes for v6:
-- Set NET_IP_ALIGN to 0 always
-
-Changes for v8:
-- Add setup of SMSC write_hwaddr function
-
-Signed-off-by: Simon Glass <sjg@chromium.org>
-Tested-by: Eric Bénard <eric@eukrea.com>
----
- drivers/usb/eth/Makefile    |    1 +
- drivers/usb/eth/smsc95xx.c  |  879 +++++++++++++++++++++++++++++++++++++++++++
- drivers/usb/eth/usb_ether.c |    7 +
- include/usb_ether.h         |   13 +
- 4 files changed, 900 insertions(+), 0 deletions(-)
- create mode 100644 drivers/usb/eth/smsc95xx.c
-
-diff --git a/drivers/usb/eth/Makefile b/drivers/usb/eth/Makefile
-index 6a5f25a..e28793d 100644
---- a/drivers/usb/eth/Makefile
-+++ b/drivers/usb/eth/Makefile
-@@ -28,6 +28,7 @@ COBJS-$(CONFIG_USB_HOST_ETHER) += usb_ether.o
- ifdef CONFIG_USB_ETHER_ASIX
- COBJS-y += asix.o
- endif
-+COBJS-$(CONFIG_USB_ETHER_SMSC95XX) += smsc95xx.o
- 
- COBJS	:= $(COBJS-y)
- SRCS	:= $(COBJS:.o=.c)
-diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c
-new file mode 100644
-index 0000000..97f2729
---- /dev/null
-+++ b/drivers/usb/eth/smsc95xx.c
-@@ -0,0 +1,879 @@
-+/*
-+ * Copyright (c) 2011 The Chromium OS Authors.
-+ * Copyright (C) 2009 NVIDIA, Corporation
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <usb.h>
-+#include <linux/mii.h>
-+#include "usb_ether.h"
-+
-+/* SMSC LAN95xx based USB 2.0 Ethernet Devices */
-+
-+/* Tx command words */
-+#define TX_CMD_A_FIRST_SEG_		0x00002000
-+#define TX_CMD_A_LAST_SEG_		0x00001000
-+
-+/* Rx status word */
-+#define RX_STS_FL_			0x3FFF0000	/* Frame Length */
-+#define RX_STS_ES_			0x00008000	/* Error Summary */
-+
-+/* SCSRs */
-+#define ID_REV				0x00
-+
-+#define INT_STS				0x08
-+
-+#define TX_CFG				0x10
-+#define TX_CFG_ON_			0x00000004
-+
-+#define HW_CFG				0x14
-+#define HW_CFG_BIR_			0x00001000
-+#define HW_CFG_RXDOFF_			0x00000600
-+#define HW_CFG_MEF_			0x00000020
-+#define HW_CFG_BCE_			0x00000002
-+#define HW_CFG_LRST_			0x00000008
-+
-+#define PM_CTRL				0x20
-+#define PM_CTL_PHY_RST_			0x00000010
-+
-+#define AFC_CFG				0x2C
-+
-+/*
-+ * Hi watermark = 15.5Kb (~10 mtu pkts)
-+ * low watermark = 3k (~2 mtu pkts)
-+ * backpressure duration = ~ 350us
-+ * Apply FC on any frame.
-+ */
-+#define AFC_CFG_DEFAULT			0x00F830A1
-+
-+#define E2P_CMD				0x30
-+#define E2P_CMD_BUSY_			0x80000000
-+#define E2P_CMD_READ_			0x00000000
-+#define E2P_CMD_TIMEOUT_		0x00000400
-+#define E2P_CMD_LOADED_			0x00000200
-+#define E2P_CMD_ADDR_			0x000001FF
-+
-+#define E2P_DATA			0x34
-+
-+#define BURST_CAP			0x38
-+
-+#define INT_EP_CTL			0x68
-+#define INT_EP_CTL_PHY_INT_		0x00008000
-+
-+#define BULK_IN_DLY			0x6C
-+
-+/* MAC CSRs */
-+#define MAC_CR				0x100
-+#define MAC_CR_MCPAS_			0x00080000
-+#define MAC_CR_PRMS_			0x00040000
-+#define MAC_CR_HPFILT_			0x00002000
-+#define MAC_CR_TXEN_			0x00000008
-+#define MAC_CR_RXEN_			0x00000004
-+
-+#define ADDRH				0x104
-+
-+#define ADDRL				0x108
-+
-+#define MII_ADDR			0x114
-+#define MII_WRITE_			0x02
-+#define MII_BUSY_			0x01
-+#define MII_READ_			0x00 /* ~of MII Write bit */
-+
-+#define MII_DATA			0x118
-+
-+#define FLOW				0x11C
-+
-+#define VLAN1				0x120
-+
-+#define COE_CR				0x130
-+#define Tx_COE_EN_			0x00010000
-+#define Rx_COE_EN_			0x00000001
-+
-+/* Vendor-specific PHY Definitions */
-+#define PHY_INT_SRC			29
-+
-+#define PHY_INT_MASK			30
-+#define PHY_INT_MASK_ANEG_COMP_		((u16)0x0040)
-+#define PHY_INT_MASK_LINK_DOWN_		((u16)0x0010)
-+#define PHY_INT_MASK_DEFAULT_		(PHY_INT_MASK_ANEG_COMP_ | \
-+					 PHY_INT_MASK_LINK_DOWN_)
-+
-+/* USB Vendor Requests */
-+#define USB_VENDOR_REQUEST_WRITE_REGISTER	0xA0
-+#define USB_VENDOR_REQUEST_READ_REGISTER	0xA1
-+
-+/* Some extra defines */
-+#define HS_USB_PKT_SIZE			512
-+#define FS_USB_PKT_SIZE			64
-+#define DEFAULT_HS_BURST_CAP_SIZE	(16 * 1024 + 5 * HS_USB_PKT_SIZE)
-+#define DEFAULT_FS_BURST_CAP_SIZE	(6 * 1024 + 33 * FS_USB_PKT_SIZE)
-+#define DEFAULT_BULK_IN_DELAY		0x00002000
-+#define MAX_SINGLE_PACKET_SIZE		2048
-+#define EEPROM_MAC_OFFSET		0x01
-+#define SMSC95XX_INTERNAL_PHY_ID	1
-+#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
-+
-+/* local defines */
-+#define SMSC95XX_BASE_NAME "sms"
-+#define USB_CTRL_SET_TIMEOUT 5000
-+#define USB_CTRL_GET_TIMEOUT 5000
-+#define USB_BULK_SEND_TIMEOUT 5000
-+#define USB_BULK_RECV_TIMEOUT 5000
-+
-+#define AX_RX_URB_SIZE 2048
-+#define PHY_CONNECT_TIMEOUT 5000
-+
-+#define TURBO_MODE
-+
-+/* local vars */
-+static int curr_eth_dev; /* index for name of next device detected */
-+
-+
-+/*
-+ * Smsc95xx infrastructure commands
-+ */
-+static int smsc95xx_write_reg(struct ueth_data *dev, u32 index, u32 data)
-+{
-+	int len;
-+
-+	cpu_to_le32s(&data);
-+
-+	len = usb_control_msg(dev->pusb_dev, usb_sndctrlpipe(dev->pusb_dev, 0),
-+		USB_VENDOR_REQUEST_WRITE_REGISTER,
-+		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-+		00, index, &data, sizeof(data), USB_CTRL_SET_TIMEOUT);
-+	if (len != sizeof(data)) {
-+		debug("smsc95xx_write_reg failed: index=%d, data=%d, len=%d",
-+		      index, data, len);
-+		return -1;
-+	}
-+	return 0;
-+}
-+
-+static int smsc95xx_read_reg(struct ueth_data *dev, u32 index, u32 *data)
-+{
-+	int len;
-+
-+	len = usb_control_msg(dev->pusb_dev, usb_rcvctrlpipe(dev->pusb_dev, 0),
-+		USB_VENDOR_REQUEST_READ_REGISTER,
-+		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
-+		00, index, data, sizeof(data), USB_CTRL_GET_TIMEOUT);
-+	if (len != sizeof(data)) {
-+		debug("smsc95xx_read_reg failed: index=%d, len=%d",
-+		      index, len);
-+		return -1;
-+	}
-+
-+	le32_to_cpus(data);
-+	return 0;
-+}
-+
-+/* Loop until the read is completed with timeout */
-+static int smsc95xx_phy_wait_not_busy(struct ueth_data *dev)
-+{
-+	unsigned long start_time = get_timer(0);
-+	u32 val;
-+
-+	do {
-+		smsc95xx_read_reg(dev, MII_ADDR, &val);
-+		if (!(val & MII_BUSY_))
-+			return 0;
-+	} while (get_timer(start_time) < 1 * 1000 * 1000);
-+
-+	return -1;
-+}
-+
-+static int smsc95xx_mdio_read(struct ueth_data *dev, int phy_id, int idx)
-+{
-+	u32 val, addr;
-+
-+	/* confirm MII not busy */
-+	if (smsc95xx_phy_wait_not_busy(dev)) {
-+		debug("MII is busy in smsc95xx_mdio_read\n");
-+		return -1;
-+	}
-+
-+	/* set the address, index & direction (read from PHY) */
-+	addr = (phy_id << 11) | (idx << 6) | MII_READ_;
-+	smsc95xx_write_reg(dev, MII_ADDR, addr);
-+
-+	if (smsc95xx_phy_wait_not_busy(dev)) {
-+		debug("Timed out reading MII reg %02X\n", idx);
-+		return -1;
-+	}
-+
-+	smsc95xx_read_reg(dev, MII_DATA, &val);
-+
-+	return (u16)(val & 0xFFFF);
-+}
-+
-+static void smsc95xx_mdio_write(struct ueth_data *dev, int phy_id, int idx,
-+				int regval)
-+{
-+	u32 val, addr;
-+
-+	/* confirm MII not busy */
-+	if (smsc95xx_phy_wait_not_busy(dev)) {
-+		debug("MII is busy in smsc95xx_mdio_write\n");
-+		return;
-+	}
-+
-+	val = regval;
-+	smsc95xx_write_reg(dev, MII_DATA, val);
-+
-+	/* set the address, index & direction (write to PHY) */
-+	addr = (phy_id << 11) | (idx << 6) | MII_WRITE_;
-+	smsc95xx_write_reg(dev, MII_ADDR, addr);
-+
-+	if (smsc95xx_phy_wait_not_busy(dev))
-+		debug("Timed out writing MII reg %02X\n", idx);
-+}
-+
-+static int smsc95xx_eeprom_confirm_not_busy(struct ueth_data *dev)
-+{
-+	unsigned long start_time = get_timer(0);
-+	u32 val;
-+
-+	do {
-+		smsc95xx_read_reg(dev, E2P_CMD, &val);
-+		if (!(val & E2P_CMD_LOADED_)) {
-+			debug("No EEPROM present\n");
-+			return -1;
-+		}
-+		if (!(val & E2P_CMD_BUSY_))
-+			return 0;
-+		udelay(40);
-+	} while (get_timer(start_time) < 1 * 1000 * 1000);
-+
-+	debug("EEPROM is busy\n");
-+	return -1;
-+}
-+
-+static int smsc95xx_wait_eeprom(struct ueth_data *dev)
-+{
-+	unsigned long start_time = get_timer(0);
-+	u32 val;
-+
-+	do {
-+		smsc95xx_read_reg(dev, E2P_CMD, &val);
-+		if (!(val & E2P_CMD_BUSY_) || (val & E2P_CMD_TIMEOUT_))
-+			break;
-+		udelay(40);
-+	} while (get_timer(start_time) < 1 * 1000 * 1000);
-+
-+	if (val & (E2P_CMD_TIMEOUT_ | E2P_CMD_BUSY_)) {
-+		debug("EEPROM read operation timeout\n");
-+		return -1;
-+	}
-+	return 0;
-+}
-+
-+static int smsc95xx_read_eeprom(struct ueth_data *dev, u32 offset, u32 length,
-+				u8 *data)
-+{
-+	u32 val;
-+	int i, ret;
-+
-+	ret = smsc95xx_eeprom_confirm_not_busy(dev);
-+	if (ret)
-+		return ret;
-+
-+	for (i = 0; i < length; i++) {
-+		val = E2P_CMD_BUSY_ | E2P_CMD_READ_ | (offset & E2P_CMD_ADDR_);
-+		smsc95xx_write_reg(dev, E2P_CMD, val);
-+
-+		ret = smsc95xx_wait_eeprom(dev);
-+		if (ret < 0)
-+			return ret;
-+
-+		smsc95xx_read_reg(dev, E2P_DATA, &val);
-+		data[i] = val & 0xFF;
-+		offset++;
-+	}
-+	return 0;
-+}
-+
-+/*
-+ * mii_nway_restart - restart NWay (autonegotiation) for this interface
-+ *
-+ * Returns 0 on success, negative on error.
-+ */
-+static int mii_nway_restart(struct ueth_data *dev)
-+{
-+	int bmcr;
-+	int r = -1;
-+
-+	/* if autoneg is off, it's an error */
-+	bmcr = smsc95xx_mdio_read(dev, dev->phy_id, MII_BMCR);
-+
-+	if (bmcr & BMCR_ANENABLE) {
-+		bmcr |= BMCR_ANRESTART;
-+		smsc95xx_mdio_write(dev, dev->phy_id, MII_BMCR, bmcr);
-+		r = 0;
-+	}
-+	return r;
-+}
-+
-+static int smsc95xx_phy_initialize(struct ueth_data *dev)
-+{
-+	smsc95xx_mdio_write(dev, dev->phy_id, MII_BMCR, BMCR_RESET);
-+	smsc95xx_mdio_write(dev, dev->phy_id, MII_ADVERTISE,
-+		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
-+		ADVERTISE_PAUSE_ASYM);
-+
-+	/* read to clear */
-+	smsc95xx_mdio_read(dev, dev->phy_id, PHY_INT_SRC);
-+
-+	smsc95xx_mdio_write(dev, dev->phy_id, PHY_INT_MASK,
-+		PHY_INT_MASK_DEFAULT_);
-+	mii_nway_restart(dev);
-+
-+	debug("phy initialised succesfully\n");
-+	return 0;
-+}
-+
-+static int smsc95xx_init_mac_address(struct eth_device *eth,
-+		struct ueth_data *dev)
-+{
-+	/* try reading mac address from EEPROM */
-+	if (smsc95xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
-+			eth->enetaddr) == 0) {
-+		if (is_valid_ether_addr(eth->enetaddr)) {
-+			/* eeprom values are valid so use them */
-+			debug("MAC address read from EEPROM\n");
-+			return 0;
-+		}
-+	}
-+
-+	/*
-+	 * No eeprom, or eeprom values are invalid. Generating a random MAC
-+	 * address is not safe. Just return an error.
-+	 */
-+	return -1;
-+}
-+
-+static int smsc95xx_write_hwaddr(struct eth_device *eth)
-+{
-+	struct ueth_data *dev = (struct ueth_data *)eth->priv;
-+	u32 addr_lo, addr_hi;
-+	int ret;
-+
-+	/* set hardware address */
-+	debug("** %s()\n", __func__);
-+	addr_lo = cpu_to_le32(*((u32 *)eth->enetaddr));
-+	addr_hi = cpu_to_le16(*((u16 *)(eth->enetaddr + 4)));
-+	ret = smsc95xx_write_reg(dev, ADDRL, addr_lo);
-+	if (ret < 0) {
-+		debug("Failed to write ADDRL: %d\n", ret);
-+		return ret;
-+	}
-+
-+	ret = smsc95xx_write_reg(dev, ADDRH, addr_hi);
-+	if (ret < 0)
-+		return ret;
-+	debug("MAC %02x:%02x:%02x:%02x:%02x:%02x\n",
-+		eth->enetaddr[0], eth->enetaddr[1],
-+		eth->enetaddr[2], eth->enetaddr[3],
-+		eth->enetaddr[4], eth->enetaddr[5]);
-+	dev->have_hwaddr = 1;
-+	return 0;
-+}
-+
-+/* Enable or disable Tx & Rx checksum offload engines */
-+static int smsc95xx_set_csums(struct ueth_data *dev,
-+		int use_tx_csum, int use_rx_csum)
-+{
-+	u32 read_buf;
-+	int ret = smsc95xx_read_reg(dev, COE_CR, &read_buf);
-+	if (ret < 0)
-+		return ret;
-+
-+	if (use_tx_csum)
-+		read_buf |= Tx_COE_EN_;
-+	else
-+		read_buf &= ~Tx_COE_EN_;
-+
-+	if (use_rx_csum)
-+		read_buf |= Rx_COE_EN_;
-+	else
-+		read_buf &= ~Rx_COE_EN_;
-+
-+	ret = smsc95xx_write_reg(dev, COE_CR, read_buf);
-+	if (ret < 0)
-+		return ret;
-+
-+	debug("COE_CR = 0x%08x\n", read_buf);
-+	return 0;
-+}
-+
-+static void smsc95xx_set_multicast(struct ueth_data *dev)
-+{
-+	/* No multicast in u-boot */
-+	dev->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
-+}
-+
-+/* starts the TX path */
-+static void smsc95xx_start_tx_path(struct ueth_data *dev)
-+{
-+	u32 reg_val;
-+
-+	/* Enable Tx at MAC */
-+	dev->mac_cr |= MAC_CR_TXEN_;
-+
-+	smsc95xx_write_reg(dev, MAC_CR, dev->mac_cr);
-+
-+	/* Enable Tx at SCSRs */
-+	reg_val = TX_CFG_ON_;
-+	smsc95xx_write_reg(dev, TX_CFG, reg_val);
-+}
-+
-+/* Starts the Receive path */
-+static void smsc95xx_start_rx_path(struct ueth_data *dev)
-+{
-+	dev->mac_cr |= MAC_CR_RXEN_;
-+	smsc95xx_write_reg(dev, MAC_CR, dev->mac_cr);
-+}
-+
-+/*
-+ * Smsc95xx callbacks
-+ */
-+static int smsc95xx_init(struct eth_device *eth, bd_t *bd)
-+{
-+	int ret;
-+	u32 write_buf;
-+	u32 read_buf;
-+	u32 burst_cap;
-+	int timeout;
-+	struct ueth_data *dev = (struct ueth_data *)eth->priv;
-+#define TIMEOUT_RESOLUTION 50	/* ms */
-+	int link_detected;
-+
-+	debug("** %s()\n", __func__);
-+	dev->phy_id = SMSC95XX_INTERNAL_PHY_ID; /* fixed phy id */
-+
-+	write_buf = HW_CFG_LRST_;
-+	ret = smsc95xx_write_reg(dev, HW_CFG, write_buf);
-+	if (ret < 0)
-+		return ret;
-+
-+	timeout = 0;
-+	do {
-+		ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
-+		if (ret < 0)
-+			return ret;
-+		udelay(10 * 1000);
-+		timeout++;
-+	} while ((read_buf & HW_CFG_LRST_) && (timeout < 100));
-+
-+	if (timeout >= 100) {
-+		debug("timeout waiting for completion of Lite Reset\n");
-+		return -1;
-+	}
-+
-+	write_buf = PM_CTL_PHY_RST_;
-+	ret = smsc95xx_write_reg(dev, PM_CTRL, write_buf);
-+	if (ret < 0)
-+		return ret;
-+
-+	timeout = 0;
-+	do {
-+		ret = smsc95xx_read_reg(dev, PM_CTRL, &read_buf);
-+		if (ret < 0)
-+			return ret;
-+		udelay(10 * 1000);
-+		timeout++;
-+	} while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100));
-+	if (timeout >= 100) {
-+		debug("timeout waiting for PHY Reset\n");
-+		return -1;
-+	}
-+	if (!dev->have_hwaddr && smsc95xx_init_mac_address(eth, dev) == 0)
-+		dev->have_hwaddr = 1;
-+	if (!dev->have_hwaddr) {
-+		puts("Error: SMSC95xx: No MAC address set - set usbethaddr\n");
-+		return -1;
-+	}
-+	if (smsc95xx_write_hwaddr(eth) < 0)
-+		return -1;
-+
-+	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
-+	if (ret < 0)
-+		return ret;
-+	debug("Read Value from HW_CFG : 0x%08x\n", read_buf);
-+
-+	read_buf |= HW_CFG_BIR_;
-+	ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
-+	if (ret < 0)
-+		return ret;
-+	debug("Read Value from HW_CFG after writing "
-+		"HW_CFG_BIR_: 0x%08x\n", read_buf);
-+
-+#ifdef TURBO_MODE
-+	if (dev->pusb_dev->speed == USB_SPEED_HIGH) {
-+		burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
-+		dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
-+	} else {
-+		burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
-+		dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
-+	}
-+#else
-+	burst_cap = 0;
-+	dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
-+#endif
-+	debug("rx_urb_size=%ld\n", (ulong)dev->rx_urb_size);
-+
-+	ret = smsc95xx_write_reg(dev, BURST_CAP, burst_cap);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = smsc95xx_read_reg(dev, BURST_CAP, &read_buf);
-+	if (ret < 0)
-+		return ret;
-+	debug("Read Value from BURST_CAP after writing: 0x%08x\n", read_buf);
-+
-+	read_buf = DEFAULT_BULK_IN_DELAY;
-+	ret = smsc95xx_write_reg(dev, BULK_IN_DLY, read_buf);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = smsc95xx_read_reg(dev, BULK_IN_DLY, &read_buf);
-+	if (ret < 0)
-+		return ret;
-+	debug("Read Value from BULK_IN_DLY after writing: "
-+			"0x%08x\n", read_buf);
-+
-+	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
-+	if (ret < 0)
-+		return ret;
-+	debug("Read Value from HW_CFG: 0x%08x\n", read_buf);
-+
-+#ifdef TURBO_MODE
-+	read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_);
-+#endif
-+	read_buf &= ~HW_CFG_RXDOFF_;
-+
-+#define NET_IP_ALIGN 0
-+	read_buf |= NET_IP_ALIGN << 9;
-+
-+	ret = smsc95xx_write_reg(dev, HW_CFG, read_buf);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = smsc95xx_read_reg(dev, HW_CFG, &read_buf);
-+	if (ret < 0)
-+		return ret;
-+	debug("Read Value from HW_CFG after writing: 0x%08x\n", read_buf);
-+
-+	write_buf = 0xFFFFFFFF;
-+	ret = smsc95xx_write_reg(dev, INT_STS, write_buf);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = smsc95xx_read_reg(dev, ID_REV, &read_buf);
-+	if (ret < 0)
-+		return ret;
-+	debug("ID_REV = 0x%08x\n", read_buf);
-+
-+	/* Init Tx */
-+	write_buf = 0;
-+	ret = smsc95xx_write_reg(dev, FLOW, write_buf);
-+	if (ret < 0)
-+		return ret;
-+
-+	read_buf = AFC_CFG_DEFAULT;
-+	ret = smsc95xx_write_reg(dev, AFC_CFG, read_buf);
-+	if (ret < 0)
-+		return ret;
-+
-+	ret = smsc95xx_read_reg(dev, MAC_CR, &dev->mac_cr);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* Init Rx. Set Vlan */
-+	write_buf = (u32)ETH_P_8021Q;
-+	ret = smsc95xx_write_reg(dev, VLAN1, write_buf);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* Disable checksum offload engines */
-+	ret = smsc95xx_set_csums(dev, 0, 0);
-+	if (ret < 0) {
-+		debug("Failed to set csum offload: %d\n", ret);
-+		return ret;
-+	}
-+	smsc95xx_set_multicast(dev);
-+
-+	if (smsc95xx_phy_initialize(dev) < 0)
-+		return -1;
-+	ret = smsc95xx_read_reg(dev, INT_EP_CTL, &read_buf);
-+	if (ret < 0)
-+		return ret;
-+
-+	/* enable PHY interrupts */
-+	read_buf |= INT_EP_CTL_PHY_INT_;
-+
-+	ret = smsc95xx_write_reg(dev, INT_EP_CTL, read_buf);
-+	if (ret < 0)
-+		return ret;
-+
-+	smsc95xx_start_tx_path(dev);
-+	smsc95xx_start_rx_path(dev);
-+
-+	timeout = 0;
-+	do {
-+		link_detected = smsc95xx_mdio_read(dev, dev->phy_id, MII_BMSR)
-+			& BMSR_LSTATUS;
-+		if (!link_detected) {
-+			if (timeout == 0)
-+				printf("Waiting for Ethernet connection... ");
-+			udelay(TIMEOUT_RESOLUTION * 1000);
-+			timeout += TIMEOUT_RESOLUTION;
-+		}
-+	} while (!link_detected && timeout < PHY_CONNECT_TIMEOUT);
-+	if (link_detected) {
-+		if (timeout != 0)
-+			printf("done.\n");
-+	} else {
-+		printf("unable to connect.\n");
-+		return -1;
-+	}
-+	return 0;
-+}
-+
-+static int smsc95xx_send(struct eth_device *eth, volatile void* packet,
-+			 int length)
-+{
-+	struct ueth_data *dev = (struct ueth_data *)eth->priv;
-+	int err;
-+	int actual_len;
-+	u32 tx_cmd_a;
-+	u32 tx_cmd_b;
-+	unsigned char msg[PKTSIZE + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)];
-+
-+	debug("** %s(), len %d, buf %#x\n", __func__, length, (int)msg);
-+	if (length > PKTSIZE)
-+		return -1;
-+
-+	tx_cmd_a = (u32)length | TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_;
-+	tx_cmd_b = (u32)length;
-+	cpu_to_le32s(&tx_cmd_a);
-+	cpu_to_le32s(&tx_cmd_b);
-+
-+	/* prepend cmd_a and cmd_b */
-+	memcpy(msg, &tx_cmd_a, sizeof(tx_cmd_a));
-+	memcpy(msg + sizeof(tx_cmd_a), &tx_cmd_b, sizeof(tx_cmd_b));
-+	memcpy(msg + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), (void *)packet,
-+	       length);
-+	err = usb_bulk_msg(dev->pusb_dev,
-+				usb_sndbulkpipe(dev->pusb_dev, dev->ep_out),
-+				(void *)msg,
-+				length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b),
-+				&actual_len,
-+				USB_BULK_SEND_TIMEOUT);
-+	debug("Tx: len = %u, actual = %u, err = %d\n",
-+	      length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b),
-+	      actual_len, err);
-+	return err;
-+}
-+
-+static int smsc95xx_recv(struct eth_device *eth)
-+{
-+	struct ueth_data *dev = (struct ueth_data *)eth->priv;
-+	static unsigned char  recv_buf[AX_RX_URB_SIZE];
-+	unsigned char *buf_ptr;
-+	int err;
-+	int actual_len;
-+	u32 packet_len;
-+	int cur_buf_align;
-+
-+	debug("** %s()\n", __func__);
-+	err = usb_bulk_msg(dev->pusb_dev,
-+				usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in),
-+				(void *)recv_buf,
-+				AX_RX_URB_SIZE,
-+				&actual_len,
-+				USB_BULK_RECV_TIMEOUT);
-+	debug("Rx: len = %u, actual = %u, err = %d\n", AX_RX_URB_SIZE,
-+	      actual_len, err);
-+	if (err != 0) {
-+		debug("Rx: failed to receive\n");
-+		return -1;
-+	}
-+	if (actual_len > AX_RX_URB_SIZE) {
-+		debug("Rx: received too many bytes %d\n", actual_len);
-+		return -1;
-+	}
-+
-+	buf_ptr = recv_buf;
-+	while (actual_len > 0) {
-+		/*
-+		 * 1st 4 bytes contain the length of the actual data plus error
-+		 * info. Extract data length.
-+		 */
-+		if (actual_len < sizeof(packet_len)) {
-+			debug("Rx: incomplete packet length\n");
-+			return -1;
-+		}
-+		memcpy(&packet_len, buf_ptr, sizeof(packet_len));
-+		le32_to_cpus(&packet_len);
-+		if (packet_len & RX_STS_ES_) {
-+			debug("Rx: Error header=%#x", packet_len);
-+			return -1;
-+		}
-+		packet_len = ((packet_len & RX_STS_FL_) >> 16);
-+
-+		if (packet_len > actual_len - sizeof(packet_len)) {
-+			debug("Rx: too large packet: %d\n", packet_len);
-+			return -1;
-+		}
-+
-+		/* Notify net stack */
-+		NetReceive(buf_ptr + sizeof(packet_len), packet_len - 4);
-+
-+		/* Adjust for next iteration */
-+		actual_len -= sizeof(packet_len) + packet_len;
-+		buf_ptr += sizeof(packet_len) + packet_len;
-+		cur_buf_align = (int)buf_ptr - (int)recv_buf;
-+
-+		if (cur_buf_align & 0x03) {
-+			int align = 4 - (cur_buf_align & 0x03);
-+
-+			actual_len -= align;
-+			buf_ptr += align;
-+		}
-+	}
-+	return err;
-+}
-+
-+static void smsc95xx_halt(struct eth_device *eth)
-+{
-+	debug("** %s()\n", __func__);
-+}
-+
-+/*
-+ * SMSC probing functions
-+ */
-+void smsc95xx_eth_before_probe(void)
-+{
-+	curr_eth_dev = 0;
-+}
-+
-+struct smsc95xx_dongle {
-+	unsigned short vendor;
-+	unsigned short product;
-+};
-+
-+static const struct smsc95xx_dongle smsc95xx_dongles[] = {
-+	{ 0x0424, 0xec00 },	/* LAN9512/LAN9514 Ethernet */
-+	{ 0x0424, 0x9500 },	/* LAN9500 Ethernet */
-+	{ 0x0000, 0x0000 }	/* END - Do not remove */
-+};
-+
-+/* Probe to see if a new device is actually an SMSC device */
-+int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum,
-+		      struct ueth_data *ss)
-+{
-+	struct usb_interface *iface;
-+	struct usb_interface_descriptor *iface_desc;
-+	int i;
-+
-+	/* let's examine the device now */
-+	iface = &dev->config.if_desc[ifnum];
-+	iface_desc = &dev->config.if_desc[ifnum].desc;
-+
-+	for (i = 0; smsc95xx_dongles[i].vendor != 0; i++) {
-+		if (dev->descriptor.idVendor == smsc95xx_dongles[i].vendor &&
-+		    dev->descriptor.idProduct == smsc95xx_dongles[i].product)
-+			/* Found a supported dongle */
-+			break;
-+	}
-+	if (smsc95xx_dongles[i].vendor == 0)
-+		return 0;
-+
-+	/* At this point, we know we've got a live one */
-+	debug("\n\nUSB Ethernet device detected\n");
-+	memset(ss, '\0', sizeof(struct ueth_data));
-+
-+	/* Initialize the ueth_data structure with some useful info */
-+	ss->ifnum = ifnum;
-+	ss->pusb_dev = dev;
-+	ss->subclass = iface_desc->bInterfaceSubClass;
-+	ss->protocol = iface_desc->bInterfaceProtocol;
-+
-+	/*
-+	 * We are expecting a minimum of 3 endpoints - in, out (bulk), and int.
-+	 * We will ignore any others.
-+	 */
-+	for (i = 0; i < iface_desc->bNumEndpoints; i++) {
-+		/* is it an BULK endpoint? */
-+		if ((iface->ep_desc[i].bmAttributes &
-+		     USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
-+			if (iface->ep_desc[i].bEndpointAddress & USB_DIR_IN)
-+				ss->ep_in =
-+					iface->ep_desc[i].bEndpointAddress &
-+					USB_ENDPOINT_NUMBER_MASK;
-+			else
-+				ss->ep_out =
-+					iface->ep_desc[i].bEndpointAddress &
-+					USB_ENDPOINT_NUMBER_MASK;
-+		}
-+
-+		/* is it an interrupt endpoint? */
-+		if ((iface->ep_desc[i].bmAttributes &
-+		    USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
-+			ss->ep_int = iface->ep_desc[i].bEndpointAddress &
-+				USB_ENDPOINT_NUMBER_MASK;
-+			ss->irqinterval = iface->ep_desc[i].bInterval;
-+		}
-+	}
-+	debug("Endpoints In %d Out %d Int %d\n",
-+		  ss->ep_in, ss->ep_out, ss->ep_int);
-+
-+	/* Do some basic sanity checks, and bail if we find a problem */
-+	if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) ||
-+	    !ss->ep_in || !ss->ep_out || !ss->ep_int) {
-+		debug("Problems with device\n");
-+		return 0;
-+	}
-+	dev->privptr = (void *)ss;
-+	return 1;
-+}
-+
-+int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
-+				struct eth_device *eth)
-+{
-+	debug("** %s()\n", __func__);
-+	if (!eth) {
-+		debug("%s: missing parameter.\n", __func__);
-+		return 0;
-+	}
-+	sprintf(eth->name, "%s%d", SMSC95XX_BASE_NAME, curr_eth_dev++);
-+	eth->init = smsc95xx_init;
-+	eth->send = smsc95xx_send;
-+	eth->recv = smsc95xx_recv;
-+	eth->halt = smsc95xx_halt;
-+	eth->write_hwaddr = smsc95xx_write_hwaddr;
-+	eth->priv = ss;
-+	return 1;
-+}
-diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c
-index 68a0883..7b55da3 100644
---- a/drivers/usb/eth/usb_ether.c
-+++ b/drivers/usb/eth/usb_ether.c
-@@ -45,6 +45,13 @@ static const struct usb_eth_prob_dev prob_dev[] = {
- 		.get_info = asix_eth_get_info,
- 	},
- #endif
-+#ifdef CONFIG_USB_ETHER_SMSC95XX
-+	{
-+		.before_probe = smsc95xx_eth_before_probe,
-+		.probe = smsc95xx_eth_probe,
-+		.get_info = smsc95xx_eth_get_info,
-+	},
-+#endif
- 	{ },		/* END */
- };
- 
-diff --git a/include/usb_ether.h b/include/usb_ether.h
-index 825c275..a7fb26b 100644
---- a/include/usb_ether.h
-+++ b/include/usb_ether.h
-@@ -51,6 +51,11 @@ struct ueth_data {
- 	unsigned char	irqinterval;	/* Intervall for IRQ Pipe */
- 
- 	/* private fields for each driver can go here if needed */
-+#ifdef CONFIG_USB_ETHER_SMSC95XX
-+	size_t rx_urb_size;  /* maximum USB URB size */
-+	u32 mac_cr;  /* MAC control register value */
-+	int have_hwaddr;  /* 1 if we have a hardware MAC address */
-+#endif
- };
- 
- /*
-@@ -65,4 +70,12 @@ int asix_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
- 		      struct eth_device *eth);
- #endif
- 
-+#ifdef CONFIG_USB_ETHER_SMSC95XX
-+void smsc95xx_eth_before_probe(void);
-+int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum,
-+			struct ueth_data *ss);
-+int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
-+			struct eth_device *eth);
-+#endif
-+
- #endif /* __USB_ETHER_H__ */
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0006-Add-Ethernet-hardware-MAC-address-framework-to-usbne.patch

@@ -1,245 +0,0 @@
-From f8ff7b1760739c33b1b0aa5a88d903e6e8945f1c Mon Sep 17 00:00:00 2001
-From: Simon Glass <sjg@chromium.org>
-Date: Mon, 13 Jun 2011 13:13:10 +0000
-Subject: [PATCH 06/30] Add Ethernet hardware MAC address framework to usbnet
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Built-in Ethernet adapters support setting the mac address by means of a
-ethaddr environment variable for each interface (ethaddr, eth1addr, eth2addr).
-
-This adds similar support to the USB network side, using the names
-usbethaddr, usbeth1addr, etc. They are kept separate since we don't want
-a USB device taking the MAC address of a built-in device or vice versa.
-
-Changes for v2:
-- eth_set_hwaddr -> eth_write_hwaddr
-- tided up other users of eth_getenv_enetaddr_by_index()
-
-Changes for v5:
-- Changed NULL to "eth" in eth_getenv_enetaddr_by_index() API
-
-Signed-off-by: Simon Glass <sjg@chromium.org>
-Tested-by: Eric Bénard <eric@eukrea.com>
----
- board/davinci/common/misc.c |    2 +-
- drivers/net/designware.c    |    2 +-
- drivers/usb/eth/usb_ether.c |    9 +++++-
- include/net.h               |   25 ++++++++++++++++-
- net/eth.c                   |   64 ++++++++++++++++++++++++++-----------------
- 5 files changed, 72 insertions(+), 30 deletions(-)
-
-diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c
-index 2bfdf23..53d6aa1 100644
---- a/board/davinci/common/misc.c
-+++ b/board/davinci/common/misc.c
-@@ -101,7 +101,7 @@ void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr)
- {
- 	uint8_t env_enetaddr[6];
- 
--	eth_getenv_enetaddr_by_index(0, env_enetaddr);
-+	eth_getenv_enetaddr_by_index("eth", 0, env_enetaddr);
- 	if (!memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) {
- 		/* There is no MAC address in the environment, so we initialize
- 		 * it from the value in the EEPROM. */
-diff --git a/drivers/net/designware.c b/drivers/net/designware.c
-index 3f5eeb7..02ba393 100644
---- a/drivers/net/designware.c
-+++ b/drivers/net/designware.c
-@@ -500,7 +500,7 @@ int designware_initialize(u32 id, ulong base_addr, u32 phy_addr)
- 	dev->iobase = (int)base_addr;
- 	dev->priv = priv;
- 
--	eth_getenv_enetaddr_by_index(id, &dev->enetaddr[0]);
-+	eth_getenv_enetaddr_by_index("eth", id, &dev->enetaddr[0]);
- 
- 	priv->dev = dev;
- 	priv->mac_regs_p = (struct eth_mac_regs *)base_addr;
-diff --git a/drivers/usb/eth/usb_ether.c b/drivers/usb/eth/usb_ether.c
-index 7b55da3..6565ea5 100644
---- a/drivers/usb/eth/usb_ether.c
-+++ b/drivers/usb/eth/usb_ether.c
-@@ -80,6 +80,7 @@ int is_eth_dev_on_usb_host(void)
-  */
- static void probe_valid_drivers(struct usb_device *dev)
- {
-+	struct eth_device *eth;
- 	int j;
- 
- 	for (j = 0; prob_dev[j].probe && prob_dev[j].get_info; j++) {
-@@ -88,9 +89,10 @@ static void probe_valid_drivers(struct usb_device *dev)
- 		/*
- 		 * ok, it is a supported eth device. Get info and fill it in
- 		 */
-+		eth = &usb_eth[usb_max_eth_dev].eth_dev;
- 		if (prob_dev[j].get_info(dev,
- 			&usb_eth[usb_max_eth_dev],
--			&usb_eth[usb_max_eth_dev].eth_dev)) {
-+			eth)) {
- 			/* found proper driver */
- 			/* register with networking stack */
- 			usb_max_eth_dev++;
-@@ -100,7 +102,10 @@ static void probe_valid_drivers(struct usb_device *dev)
- 			 * call since eth_current_changed (internally called)
- 			 * relies on it
- 			 */
--			eth_register(&usb_eth[usb_max_eth_dev - 1].eth_dev);
-+			eth_register(eth);
-+			if (eth_write_hwaddr(eth, "usbeth",
-+					usb_max_eth_dev - 1))
-+				puts("Warning: failed to set MAC address\n");
- 			break;
- 			}
- 		}
-diff --git a/include/net.h b/include/net.h
-index 018a744..ce54825 100644
---- a/include/net.h
-+++ b/include/net.h
-@@ -128,7 +128,18 @@ extern int eth_get_dev_index (void);		/* get the device index */
- extern void eth_parse_enetaddr(const char *addr, uchar *enetaddr);
- extern int eth_getenv_enetaddr(char *name, uchar *enetaddr);
- extern int eth_setenv_enetaddr(char *name, const uchar *enetaddr);
--extern int eth_getenv_enetaddr_by_index(int index, uchar *enetaddr);
-+
-+/*
-+ * Get the hardware address for an ethernet interface .
-+ * Args:
-+ *	base_name - base name for device (normally "eth")
-+ *	index - device index number (0 for first)
-+ *	enetaddr - returns 6 byte hardware address
-+ * Returns:
-+ *	Return true if the address is valid.
-+ */
-+extern int eth_getenv_enetaddr_by_index(const char *base_name, int index,
-+					uchar *enetaddr);
- 
- extern int usb_eth_initialize(bd_t *bi);
- extern int eth_init(bd_t *bis);			/* Initialize the device */
-@@ -141,6 +152,18 @@ extern int eth_rx(void);			/* Check for received packets */
- extern void eth_halt(void);			/* stop SCC */
- extern char *eth_get_name(void);		/* get name of current device */
- 
-+/*
-+ * Set the hardware address for an ethernet interface based on 'eth%daddr'
-+ * environment variable (or just 'ethaddr' if eth_number is 0).
-+ * Args:
-+ *	base_name - base name for device (normally "eth")
-+ *	eth_number - value of %d (0 for first device of this type)
-+ * Returns:
-+ *	0 is success, non-zero is error status from driver.
-+ */
-+int eth_write_hwaddr(struct eth_device *dev, const char *base_name,
-+		     int eth_number);
-+
- #ifdef CONFIG_MCAST_TFTP
- int eth_mcast_join( IPaddr_t mcast_addr, u8 join);
- u32 ether_crc (size_t len, unsigned char const *p);
-diff --git a/net/eth.c b/net/eth.c
-index 6523834..b3ea565 100644
---- a/net/eth.c
-+++ b/net/eth.c
-@@ -54,10 +54,11 @@ int eth_setenv_enetaddr(char *name, const uchar *enetaddr)
- 	return setenv(name, buf);
- }
- 
--int eth_getenv_enetaddr_by_index(int index, uchar *enetaddr)
-+int eth_getenv_enetaddr_by_index(const char *base_name, int index,
-+				 uchar *enetaddr)
- {
- 	char enetvar[32];
--	sprintf(enetvar, index ? "eth%daddr" : "ethaddr", index);
-+	sprintf(enetvar, index ? "%s%daddr" : "%saddr", base_name, index);
- 	return eth_getenv_enetaddr(enetvar, enetaddr);
- }
- 
-@@ -188,6 +189,38 @@ static void eth_current_changed(void)
- #endif
- }
- 
-+int eth_write_hwaddr(struct eth_device *dev, const char *base_name,
-+		   int eth_number)
-+{
-+	unsigned char env_enetaddr[6];
-+	int ret = 0;
-+
-+	if (!eth_getenv_enetaddr_by_index(base_name, eth_number, env_enetaddr))
-+		return -1;
-+
-+	if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) {
-+		if (memcmp(dev->enetaddr, "\0\0\0\0\0\0", 6) &&
-+			memcmp(dev->enetaddr, env_enetaddr, 6)) {
-+			printf("\nWarning: %s MAC addresses don't match:\n",
-+				dev->name);
-+			printf("Address in SROM is         %pM\n",
-+				dev->enetaddr);
-+			printf("Address in environment is  %pM\n",
-+				env_enetaddr);
-+		}
-+
-+		memcpy(dev->enetaddr, env_enetaddr, 6);
-+	}
-+
-+	if (dev->write_hwaddr &&
-+		!eth_mac_skip(eth_number) &&
-+		is_valid_ether_addr(dev->enetaddr)) {
-+		ret = dev->write_hwaddr(dev);
-+	}
-+
-+	return ret;
-+}
-+
- int eth_register(struct eth_device *dev)
- {
- 	struct eth_device *d;
-@@ -208,7 +241,6 @@ int eth_register(struct eth_device *dev)
- 
- int eth_initialize(bd_t *bis)
- {
--	unsigned char env_enetaddr[6];
- 	int eth_number = 0;
- 
- 	eth_devices = NULL;
-@@ -264,27 +296,8 @@ int eth_initialize(bd_t *bis)
- 			if (strchr(dev->name, ' '))
- 				puts("\nWarning: eth device name has a space!\n");
- 
--			eth_getenv_enetaddr_by_index(eth_number, env_enetaddr);
--
--			if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) {
--				if (memcmp(dev->enetaddr, "\0\0\0\0\0\0", 6) &&
--				    memcmp(dev->enetaddr, env_enetaddr, 6))
--				{
--					printf ("\nWarning: %s MAC addresses don't match:\n",
--						dev->name);
--					printf ("Address in SROM is         %pM\n",
--						dev->enetaddr);
--					printf ("Address in environment is  %pM\n",
--						env_enetaddr);
--				}
--
--				memcpy(dev->enetaddr, env_enetaddr, 6);
--			}
--			if (dev->write_hwaddr &&
--				!eth_mac_skip(eth_number) &&
--				is_valid_ether_addr(dev->enetaddr)) {
--				dev->write_hwaddr(dev);
--			}
-+			if (eth_write_hwaddr(dev, NULL, eth_number))
-+				puts("Warning: failed to set MAC address\n");
- 
- 			eth_number++;
- 			dev = dev->next;
-@@ -359,7 +372,8 @@ int eth_init(bd_t *bis)
- 	do {
- 		uchar env_enetaddr[6];
- 
--		if (eth_getenv_enetaddr_by_index(eth_number, env_enetaddr))
-+		if (eth_getenv_enetaddr_by_index("eth", eth_number,
-+						 env_enetaddr))
- 			memcpy(dev->enetaddr, env_enetaddr, 6);
- 
- 		++eth_number;
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0007-Add-documentation-for-USB-Host-Networking.patch

@@ -1,188 +0,0 @@
-From 48938b9136e85d7399b8cc831731acd26dfb2e08 Mon Sep 17 00:00:00 2001
-From: Simon Glass <sjg@chromium.org>
-Date: Mon, 13 Jun 2011 13:13:11 +0000
-Subject: [PATCH 07/30] Add documentation for USB Host Networking
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This describes what it is for, devices supported, how to enable for your
-board in U-Boot, setting up the server, and notes about MAC addresses.
-
-Changes for v6:
-- Adjust documentation file according to Wolfgang's comments
-
-Signed-off-by: Simon Glass <sjg@chromium.org>
-Tested-by: Eric Bénard <eric@eukrea.com>
----
- doc/README.usb |  157 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-
- 1 files changed, 156 insertions(+), 1 deletions(-)
-
-diff --git a/doc/README.usb b/doc/README.usb
-index 9aa4f62..a8a4058 100644
---- a/doc/README.usb
-+++ b/doc/README.usb
-@@ -79,4 +79,159 @@ CONFIG_USB_UHCI	    defines the lowlevel part.A lowlevel part must be defined
- 		    if using CONFIG_CMD_USB
- CONFIG_USB_KEYBOARD enables the USB Keyboard
- CONFIG_USB_STORAGE  enables the USB storage devices
--CONFIG_USB_HOST_ETHER	enables USB ethernet dongle support
-+CONFIG_USB_HOST_ETHER	enables USB ethernet adapter support
-+
-+
-+USB Host Networking
-+===================
-+
-+If you have a supported USB Ethernet adapter you can use it in U-Boot
-+to obtain an IP address and load a kernel from a network server.
-+
-+Note: USB Host Networking is not the same as making your board act as a USB
-+client. In that case your board is pretending to be an Ethernet adapter
-+and will appear as a network interface to an attached computer. In that
-+case the connection is via a USB cable with the computer acting as the host.
-+
-+With USB Host Networking, your board is the USB host. It controls the
-+Ethernet adapter to which it is directly connected and the connection to
-+the outside world is your adapter's Ethernet cable. Your board becomes an
-+independent network device, able to connect and perform network operations
-+independently of your computer.
-+
-+
-+Device support
-+--------------
-+
-+Currently supported devices are listed in the drivers according to
-+their vendor and product IDs. You can check your device by connecting it
-+to a Linux machine and typing 'lsusb'. The drivers are in
-+drivers/usb/eth.
-+
-+For example this lsusb output line shows a device with Vendor ID 0x0x95
-+and product ID 0x7720:
-+
-+Bus 002 Device 010: ID 0b95:7720 ASIX Electronics Corp. AX88772
-+
-+If you look at drivers/usb/eth/asix.c you will see this line within the
-+supported device list, so we know this adapter is supported.
-+
-+        { 0x0b95, 0x7720 },     /* Trendnet TU2-ET100 V3.0R */
-+
-+If your adapter is not listed there is a still a chance that it will
-+work. Try looking up the manufacturer of the chip inside your adapter.
-+or take the adapter apart and look for chip markings. Then add a line
-+for your vendor/product ID into the table of the appropriate driver,
-+build U-Boot and see if it works. If not then there might be differences
-+between the chip in your adapter and the driver. You could try to get a
-+datasheet for your device and add support for it to U-Boot. This is not
-+particularly difficult - you only need to provide support for four basic
-+functions: init, halt, send and recv.
-+
-+
-+Enabling USB Host Networking
-+----------------------------
-+
-+The normal U-Boot commands are used with USB networking, but you must
-+start USB first. For example:
-+
-+usb start
-+setenv bootfile /tftpboot/uImage
-+bootp
-+
-+
-+To enable USB Host Ethernet in U-Boot, your platform must of course
-+support USB with CONFIG_CMD_USB enabled and working. You will need to
-+add some config settings to your board header file:
-+
-+#define CONFIG_USB_HOST_ETHER   /* Enable USB Ethernet adapters */
-+#define CONFIG_USB_ETHER_ASIX   /* Asix, or whatever driver(s) you want */
-+
-+As with built-in networking, you will also want to enable some network
-+commands, for example:
-+
-+#define CONFIG_CMD_NET
-+#define CONFIG_NET_MULTI
-+#define CONFIG_CMD_PING
-+#define CONFIG_CMD_DHCP
-+
-+and some bootp options, which tell your board to obtain its subnet,
-+gateway IP, host name and boot path from the bootp/dhcp server. These
-+settings should start you off:
-+
-+#define CONFIG_BOOTP_SUBNETMASK
-+#define CONFIG_BOOTP_GATEWAY
-+#define CONFIG_BOOTP_HOSTNAME
-+#define CONFIG_BOOTP_BOOTPATH
-+
-+You can also set the default IP address of your board and the server
-+as well as the default file to load when a 'bootp' command is issued.
-+All of these can be obtained from the bootp server if not set.
-+
-+#define CONFIG_IPADDR           10.0.0.2  (replace with your value)
-+#define CONFIG_SERVERIP         10.0.0.1  (replace with your value)
-+#define CONFIG_BOOTFILE         uImage
-+
-+
-+The 'usb start' command should identify the adapter something like this:
-+
-+CrOS> usb start
-+(Re)start USB...
-+USB EHCI 1.00
-+scanning bus for devices... 3 USB Device(s) found
-+       scanning bus for storage devices... 0 Storage Device(s) found
-+       scanning bus for ethernet devices... 1 Ethernet Device(s) found
-+CrOS> print ethact
-+ethact=asx0
-+
-+You can see that it found an ethernet device and we can print out the
-+device name (asx0 in this case).
-+
-+Then 'bootp' or 'dhcp' should use it to obtain an IP address from DHCP,
-+perhaps something like this:
-+
-+CrOS> bootp
-+Waiting for Ethernet connection... done.
-+BOOTP broadcast 1
-+BOOTP broadcast 2
-+DHCP client bound to address 172.22.73.81
-+Using asx0 device
-+TFTP from server 172.22.72.144; our IP address is 172.22.73.81
-+Filename '/tftpboot/uImage-sjg-seaboard-261347'.
-+Load address: 0x40c000
-+Loading: #################################################################
-+         #################################################################
-+         #################################################################
-+         ################################################
-+done
-+Bytes transferred = 3557464 (364858 hex)
-+CrOS>
-+
-+
-+Another way of doing this is to issue a tftp command, which will cause the
-+bootp to happen automatically.
-+
-+
-+MAC Addresses
-+-------------
-+
-+Most Ethernet dongles have a built-in MAC address which is unique in the
-+world. This is important so that devices on the network can be
-+distinguised from each other. MAC address conflicts are evil and
-+generally result in strange and eratic behaviour.
-+
-+Some boards have USB Ethernet chips on-board, and these sometimes do not
-+have an assigned MAC address. In this case it is up to you to assign
-+one which is unique. You should obtain a valid MAC address from a range
-+assigned to you before you ship the product.
-+
-+Built-in Ethernet adapters support setting the MAC address by means of
-+an ethaddr environment variable for each interface (ethaddr, eth1addr,
-+eth2addr). There is similar support on the USB network side, using the
-+names usbethaddr, usbeth1addr, etc. They are kept separate since we
-+don't want a USB device taking the MAC address of a built-in device or
-+vice versa.
-+
-+So if your USB Ethernet chip doesn't have a MAC address available then
-+you must set usbethaddr to a suitable MAC address. At the time of
-+writing this functionality is only supported by the SMSC driver.
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0008-dm3730-enable-dpll5.patch

@@ -1,31 +0,0 @@
-From a13358a747c33ecda28a976ed9450b9351827c2a Mon Sep 17 00:00:00 2001
-From: Eric Benard <eric@eukrea.com>
-Date: Fri, 10 Jun 2011 12:21:52 +0000
-Subject: [PATCH 08/30] dm3730: enable dpll5
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-which is used to provide 120MHz to USB EHCI
-This allows EHCI to work on BeagleBoard XM
-
-Signed-off-by: Eric Bénard <eric@eukrea.com>
----
- arch/arm/cpu/armv7/omap3/clock.c |    1 +
- 1 files changed, 1 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
-index 3d38d08..6a9edcf 100644
---- a/arch/arm/cpu/armv7/omap3/clock.c
-+++ b/arch/arm/cpu/armv7/omap3/clock.c
-@@ -579,6 +579,7 @@ void prcm_init(void)
- 
- 		dpll3_init_36xx(0, clk_index);
- 		dpll4_init_36xx(0, clk_index);
-+		dpll5_init_34xx(0, clk_index);
- 		iva_init_36xx(0, clk_index);
- 		mpu_init_36xx(0, clk_index);
- 
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0009-beagleboard-enable-HUB-power-on-XM-boards.patch

@@ -1,40 +0,0 @@
-From 48f6f945c028a83725ab962cbff5120ac5280cd0 Mon Sep 17 00:00:00 2001
-From: Eric Benard <eric@eukrea.com>
-Date: Fri, 17 Jun 2011 09:24:24 +0200
-Subject: [PATCH 09/30] beagleboard: enable HUB power on XM boards
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-LEDA needs to be at level 0 to enable HUB_3V3
-
-Signed-off-by: Eric Bénard <eric@eukrea.com>
----
- board/ti/beagle/beagle.c |   11 +++++++++--
- 1 files changed, 9 insertions(+), 2 deletions(-)
-
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index 7768901..a6ce5a8 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -309,8 +309,15 @@ int misc_init_r(void)
- 		setenv(expansion_config.env_var, expansion_config.env_setting);
- 
- 	twl4030_power_init();
--	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
--
-+	switch (get_board_revision()) {
-+		case REVISION_C4:
-+		case REVISION_XM_C:
-+			twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
-+			break;
-+		default:
-+			twl4030_led_init(TWL4030_LED_LEDEN_LEDBON);
-+			break;
-+	}
- 	/* Set GPIO states before they are made outputs */
- 	writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1,
- 		&gpio6_base->setdataout);
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0010-beagleboard-turn-off-clocks-in-ehci_stop.patch

@@ -1,32 +0,0 @@
-From 9ae080a8b4f2a580c2bf3fb790fb141e1e618ef7 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Fri, 17 Jun 2011 09:26:17 +0200
-Subject: [PATCH 10/30] beagleboard: turn off clocks in ehci_stop
-
-This fixes display problems in linux
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- board/ti/beagle/beagle.c |    6 ++++++
- 1 files changed, 6 insertions(+), 0 deletions(-)
-
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index a6ce5a8..a290f89 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -363,6 +363,12 @@ int ehci_hcd_stop(void)
- 	pr_debug("Resetting OMAP3 EHCI\n");
- 	omap_set_gpio_dataout(GPIO_PHY_RESET, 0);
- 	writel(OMAP_UHH_SYSCONFIG_SOFTRESET, OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG);
-+	/* disable USB clocks */
-+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
-+	sr32(&prcm_base->iclken_usbhost, 0, 1, 0);
-+	sr32(&prcm_base->fclken_usbhost, 0, 2, 0);
-+	sr32(&prcm_base->iclken3_core, 2, 1, 0);
-+	sr32(&prcm_base->fclken3_core, 2, 1, 0);
- 	return 0;
- }
- 
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0011-beagleboard-enable-networking.patch

@@ -1,45 +0,0 @@
-From c3d4be5f60700c3e30f00818211775a2c8398e2f Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Fri, 17 Jun 2011 09:31:09 +0200
-Subject: [PATCH 11/30] beagleboard: enable networking
-
----
- include/configs/omap3_beagle.h |   10 ++++++++--
- 1 files changed, 8 insertions(+), 2 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index d5f98da..2daf06d 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -129,6 +129,10 @@
- #define CONFIG_CMD_USB
- #define CONFIG_USB_EHCI
- #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
-+#define CONFIG_USB_HOST_ETHER
-+#define CONFIG_USB_ETHER_SMSC95XX
-+
-+#define CONFIG_NET_MULTI
- 
- /* commands to include */
- #include <config_cmd_default.h>
-@@ -149,13 +153,15 @@
- #define CONFIG_USB_STORAGE	/* USB storage support		*/
- #define CONFIG_CMD_NAND		/* NAND support			*/
- #define CONFIG_CMD_LED		/* LED support			*/
-+#define CONFIG_CMD_NET      /* bootp, tftpboot, rarpboot    */
-+#define CONFIG_CMD_NFS      /* NFS support          */
-+#define CONFIG_CMD_PING
-+
- 
- #undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
- #undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
- #undef CONFIG_CMD_IMI		/* iminfo			*/
- #undef CONFIG_CMD_IMLS		/* List all found images	*/
--#undef CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
--#undef CONFIG_CMD_NFS		/* NFS support			*/
- 
- #define CONFIG_SYS_NO_FLASH
- #define CONFIG_HARD_I2C			1
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0012-beagleboard-switch-to-ttyO2-as-console.patch

@@ -1,26 +0,0 @@
-From 04a20a72599d016785d751381fb1ea5112fb0de8 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Fri, 17 Jun 2011 09:32:17 +0200
-Subject: [PATCH 12/30] beagleboard: switch to ttyO2 as console
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/omap3_beagle.h |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 2daf06d..9a161cf 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -206,7 +206,7 @@
- #define CONFIG_EXTRA_ENV_SETTINGS \
- 	"loadaddr=0x82000000\0" \
- 	"usbtty=cdc_acm\0" \
--	"console=ttyS2,115200n8\0" \
-+	"console=ttyO2,115200n8\0" \
- 	"mpurate=auto\0" \
- 	"buddy=none "\
- 	"vram=12M\0" \
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0013-beagleboard-load-kernel-from-MMC-ext-not-FAT.patch

@@ -1,27 +0,0 @@
-From 91da655eb768b52d085fac42648e6bcf342a1f7f Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Fri, 17 Jun 2011 09:33:03 +0200
-Subject: [PATCH 13/30] beagleboard: load kernel from MMC ext, not FAT
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/omap3_beagle.h |    3 ++-
- 1 files changed, 2 insertions(+), 1 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 9a161cf..dbb77fb 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -246,7 +246,8 @@
- 		"root=${ramroot} " \
- 		"rootfstype=${ramrootfstype}\0" \
- 	"loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
--	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
-+	"loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
-+	"loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} /boot/uImage\0" \
- 	"mmcboot=echo Booting from mmc ...; " \
- 		"run mmcargs; " \
- 		"bootm ${loadaddr}\0" \
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0014-beagleboard-enable-asix-driver-and-dhcp.patch

@@ -1,34 +0,0 @@
-From b8f56a9f7ab18641dd0f4529333b00918d34c95d Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Fri, 17 Jun 2011 09:47:08 +0200
-Subject: [PATCH 14/30] beagleboard: enable asix driver and dhcp
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/omap3_beagle.h |    3 ++-
- 1 files changed, 2 insertions(+), 1 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index dbb77fb..49e9dd3 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -131,6 +131,7 @@
- #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
- #define CONFIG_USB_HOST_ETHER
- #define CONFIG_USB_ETHER_SMSC95XX
-+#define CONFIG_USB_ETHER_ASIX
- 
- #define CONFIG_NET_MULTI
- 
-@@ -156,7 +157,7 @@
- #define CONFIG_CMD_NET      /* bootp, tftpboot, rarpboot    */
- #define CONFIG_CMD_NFS      /* NFS support          */
- #define CONFIG_CMD_PING
--
-+#define CONFIG_CMD_DHCP
- 
- #undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
- #undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0015-beagleboard-hardcode-MAC-for-onboard-SMSC-and-use-uI.patch

@@ -1,26 +0,0 @@
-From 2a713d6b62248a18ee798d08bbc7850accfc2e83 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Fri, 17 Jun 2011 10:02:21 +0200
-Subject: [PATCH 15/30] beagleboard: hardcode MAC for onboard SMSC and use uImage.beagle fot tftp
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/omap3_beagle.h |    2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 49e9dd3..894a071 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -207,6 +207,8 @@
- #define CONFIG_EXTRA_ENV_SETTINGS \
- 	"loadaddr=0x82000000\0" \
- 	"usbtty=cdc_acm\0" \
-+	"usbethaddr=de:ad:be:ef\0" \
-+	"bootfile=uImage.beagle\0" \
- 	"console=ttyO2,115200n8\0" \
- 	"mpurate=auto\0" \
- 	"buddy=none "\
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0016-beagleboard-decrease-bootdelay-to-2-seconds.patch

@@ -1,26 +0,0 @@
-From ea8ed1da87f4612bdcbc611e6d4ccb9b7ea4d2ff Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Fri, 17 Jun 2011 10:03:06 +0200
-Subject: [PATCH 16/30] beagleboard: decrease bootdelay to 2 seconds
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/omap3_beagle.h |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 894a071..5c32265 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -202,7 +202,7 @@
- 							/* partition */
- 
- /* Environment information */
--#define CONFIG_BOOTDELAY		10
-+#define CONFIG_BOOTDELAY		2
- 
- #define CONFIG_EXTRA_ENV_SETTINGS \
- 	"loadaddr=0x82000000\0" \
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0017-USB-Remove-__attribute__-packed-for-struct-ehci_hccr.patch

@@ -1,58 +0,0 @@
-From 4099bd50da694cc35c489547ad0d8a30bd99006a Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Wed, 20 Apr 2011 08:54:16 -0500
-Subject: [PATCH 17/30] USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor
-
-Remove __attribute__ ((packed)) to prevent byte access to soc
-registers in some gcc versions.
-
-Having patches to enable ehci for the BeagleBoard lying around for
-several month, this one was the show-stopper.
-
-Credits have to go to Laine Walker-Avina <lwalkera@ieee.org> for
-finding the problem.
-
-Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
-Cc: Alexander Holler <holler@ahsoftware.de>
-Cc: Sandeep Paulraj <s-paulraj@ti.com>
----
-Changes for v2:
-* Original and v2 were provided by Alexander Holler.
-* v1 was http://patchwork.ozlabs.org/patch/89358/
-* v2 was http://patchwork.ozlabs.org/patch/89362/
-
-Changes for v3:
-* Switched to align(4), rather than remove the attribute, per suggestion
-  from Alexander.
-
-Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- drivers/usb/host/ehci.h |    4 ++--
- 1 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
-index 945ab64..3d0ad0c 100644
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -55,7 +55,7 @@ struct ehci_hccr {
- #define HCS_N_PORTS(p)		(((p) >> 0) & 0xf)
- 	uint32_t cr_hccparams;
- 	uint8_t cr_hcsp_portrt[8];
--} __attribute__ ((packed));
-+} __attribute__ ((packed, aligned(4)));
- 
- struct ehci_hcor {
- 	uint32_t or_usbcmd;
-@@ -85,7 +85,7 @@ struct ehci_hcor {
- #define FLAG_CF		(1 << 0)	/* true:  we'll support "high speed" */
- 	uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS];
- 	uint32_t or_systune;
--} __attribute__ ((packed));
-+} __attribute__ ((packed, aligned(4)));
- 
- #define USBMODE		0x68		/* USB Device mode */
- #define USBMODE_SDIS	(1 << 3)	/* Stream disable */
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0018-usb-Some-EHCI-chipsets-are-slow-to-respond.patch

@@ -1,29 +0,0 @@
-From 7378bf55a895a957a5ea31c5fac5b53a844778d2 Mon Sep 17 00:00:00 2001
-From: Jason Cooper <u-boot@lakedaemon.net>
-Date: Tue, 14 Jun 2011 05:58:12 +0000
-Subject: [PATCH 18/30] usb: Some EHCI chipsets are slow to respond.
-
-This fixes 'EHCI timed out on TD...' on the dreamplug board.
-
-Signed-off-by: Jason Cooper <u-boot@lakedaemon.net>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/usb.h |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/include/usb.h b/include/usb.h
-index 53603a5..168e2b2 100644
---- a/include/usb.h
-+++ b/include/usb.h
-@@ -46,7 +46,7 @@
-  * This is the timeout to allow for submitting an urb in ms. We allow more
-  * time for a BULK device to react - some are slow.
-  */
--#define USB_TIMEOUT_MS(pipe) (usb_pipebulk(pipe) ? 5000 : 100)
-+#define USB_TIMEOUT_MS(pipe) (usb_pipebulk(pipe) ? 5000 : 500)
- 
- /* device request (setup) */
- struct devrequest {
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0019-OMAP3-Add-DSS-driver-for-OMAP3.patch

@@ -1,349 +0,0 @@
-From e6e189b6062f7af6b993420b9de9656e36739e66 Mon Sep 17 00:00:00 2001
-From: Syed Mohammed Khasim <khasim@ti.com>
-Date: Tue, 12 Jan 2010 23:57:28 +0530
-Subject: [PATCH 19/30] OMAP3: Add DSS driver for OMAP3
-
-Supports dynamic panel configuration
-Supports dynamic tv standard selection
-Adds support for DSS register access through generic APIs
-
-Incorporated DSS register access using structures.
-
-Previous discussions are here
-http://www.mail-archive.com/u-boot@lists.denx.de/msg27150.html
----
-v2 updates:
-  * Enable panel output for BeagleBoard
-  * BeagleBoard: Update DVI-D orange screen frequencies for xM
-
-v3 updates:
-  * Remove non-platform (OMAP3) updates
-
-Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
-Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- arch/arm/include/asm/arch-omap3/dss.h |  173 +++++++++++++++++++++++++++++++++
- drivers/video/omap3_dss.c             |  130 +++++++++++++++++++++++++
- 2 files changed, 303 insertions(+), 0 deletions(-)
- create mode 100644 arch/arm/include/asm/arch-omap3/dss.h
- create mode 100644 drivers/video/omap3_dss.c
-
-diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h
-new file mode 100644
-index 0000000..e5e3b0d
---- /dev/null
-+++ b/arch/arm/include/asm/arch-omap3/dss.h
-@@ -0,0 +1,173 @@
-+/*
-+ * (C) Copyright 2010
-+ * Texas Instruments, <www.ti.com>
-+ * Syed Mohammed Khasim <khasim@ti.com>
-+ *
-+ * Referred to Linux DSS driver files for OMAP3
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation's version 2 of
-+ * the License.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef DSS_H
-+#define DSS_H
-+
-+/*
-+ * DSS Base Registers
-+ */
-+#define OMAP3_DSS_BASE		0x48050040
-+#define OMAP3_DISPC_BASE	0x48050440
-+#define OMAP3_VENC_BASE		0x48050C00
-+
-+/* DSS Registers */
-+struct dss_regs {
-+	u32 control;				/* 0x40 */
-+	u32 sdi_control;			/* 0x44 */
-+	u32 pll_control;			/* 0x48 */
-+};
-+
-+/* DISPC Registers */
-+struct dispc_regs {
-+	u32 control;				/* 0x40 */
-+	u32 config;				/* 0x44 */
-+	u32 reserve_2;				/* 0x48 */
-+	u32 default_color0;			/* 0x4C */
-+	u32 default_color1;			/* 0x50 */
-+	u32 trans_color0;			/* 0x54 */
-+	u32 trans_color1;			/* 0x58 */
-+	u32 line_status;			/* 0x5C */
-+	u32 line_number;			/* 0x60 */
-+	u32 timing_h;				/* 0x64 */
-+	u32 timing_v;				/* 0x68 */
-+	u32 pol_freq;				/* 0x6C */
-+	u32 divisor;				/* 0x70 */
-+	u32 global_alpha;			/* 0x74 */
-+	u32 size_dig;				/* 0x78 */
-+	u32 size_lcd;				/* 0x7C */
-+};
-+
-+/* VENC Registers */
-+struct venc_regs {
-+	u32 rev_id;				/* 0x00 */
-+	u32 status;				/* 0x04 */
-+	u32 f_control;				/* 0x08 */
-+	u32 reserve_1;				/* 0x0C */
-+	u32 vidout_ctrl;			/* 0x10 */
-+	u32 sync_ctrl;				/* 0x14 */
-+	u32 reserve_2;				/* 0x18 */
-+	u32 llen;				/* 0x1C */
-+	u32 flens;				/* 0x20 */
-+	u32 hfltr_ctrl;				/* 0x24 */
-+	u32 cc_carr_wss_carr;			/* 0x28 */
-+	u32 c_phase;				/* 0x2C */
-+	u32 gain_u;				/* 0x30 */
-+	u32 gain_v;				/* 0x34 */
-+	u32 gain_y;				/* 0x38 */
-+	u32 black_level;			/* 0x3C */
-+	u32 blank_level;			/* 0x40 */
-+	u32 x_color;				/* 0x44 */
-+	u32 m_control;				/* 0x48 */
-+	u32 bstamp_wss_data;			/* 0x4C */
-+	u32 s_carr;				/* 0x50 */
-+	u32 line21;				/* 0x54 */
-+	u32 ln_sel;				/* 0x58 */
-+	u32 l21__wc_ctl;			/* 0x5C */
-+	u32 htrigger_vtrigger;			/* 0x60 */
-+	u32 savid__eavid;			/* 0x64 */
-+	u32 flen__fal;				/* 0x68 */
-+	u32 lal__phase_reset;			/* 0x6C */
-+	u32 hs_int_start_stop_x;		/* 0x70 */
-+	u32 hs_ext_start_stop_x;		/* 0x74 */
-+	u32 vs_int_start_x;			/* 0x78 */
-+	u32 vs_int_stop_x__vs_int_start_y;	/* 0x7C */
-+	u32 vs_int_stop_y__vs_ext_start_x;	/* 0x80 */
-+	u32 vs_ext_stop_x__vs_ext_start_y;	/* 0x84 */
-+	u32 vs_ext_stop_y;			/* 0x88 */
-+	u32 reserve_3;				/* 0x8C */
-+	u32 avid_start_stop_x;			/* 0x90 */
-+	u32 avid_start_stop_y;			/* 0x94 */
-+	u32 reserve_4;				/* 0x98 */
-+	u32 reserve_5;				/* 0x9C */
-+	u32 fid_int_start_x__fid_int_start_y;	/* 0xA0 */
-+	u32 fid_int_offset_y__fid_ext_start_x;	/* 0xA4 */
-+	u32 fid_ext_start_y__fid_ext_offset_y;	/* 0xA8 */
-+	u32 reserve_6;				/* 0xAC */
-+	u32 tvdetgp_int_start_stop_x;		/* 0xB0 */
-+	u32 tvdetgp_int_start_stop_y;		/* 0xB4 */
-+	u32 gen_ctrl;				/* 0xB8 */
-+	u32 reserve_7;				/* 0xBC */
-+	u32 reserve_8;				/* 0xC0 */
-+	u32 output_control;			/* 0xC4 */
-+	u32 dac_b__dac_c;			/* 0xC8 */
-+	u32 height_width;			/* 0xCC */
-+};
-+
-+/* Few Register Offsets */
-+#define FRAME_MODE_SHIFT			1
-+#define TFTSTN_SHIFT				3
-+#define DATALINES_SHIFT				8
-+
-+/* Enabling Display controller */
-+#define LCD_ENABLE				1
-+#define DIG_ENABLE				(1 << 1)
-+#define GO_LCD					(1 << 5)
-+#define GO_DIG					(1 << 6)
-+#define GP_OUT0					(1 << 15)
-+#define GP_OUT1					(1 << 16)
-+
-+#define DISPC_ENABLE				(LCD_ENABLE | \
-+						 DIG_ENABLE | \
-+						 GO_LCD | \
-+						 GO_DIG | \
-+						 GP_OUT0| \
-+						 GP_OUT1)
-+
-+/* Configure VENC DSS Params */
-+#define VENC_CLK_ENABLE				(1 << 3)
-+#define DAC_DEMEN				(1 << 4)
-+#define DAC_POWERDN				(1 << 5)
-+#define VENC_OUT_SEL				(1 << 6)
-+#define DIG_LPP_SHIFT				16
-+#define VENC_DSS_CONFIG				(VENC_CLK_ENABLE | \
-+						 DAC_DEMEN | \
-+						 DAC_POWERDN | \
-+						 VENC_OUT_SEL)
-+/*
-+ * Panel Configuration
-+ */
-+struct panel_config {
-+	u32 timing_h;
-+	u32 timing_v;
-+	u32 pol_freq;
-+	u32 divisor;
-+	u32 lcd_size;
-+	u32 panel_type;
-+	u32 data_lines;
-+	u32 load_mode;
-+	u32 panel_color;
-+};
-+
-+/*
-+ * Generic DSS Functions
-+ */
-+void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
-+			u32 height, u32 width);
-+void omap3_dss_panel_config(const struct panel_config *panel_cfg);
-+void omap3_dss_enable(void);
-+
-+#endif /* DSS_H */
-diff --git a/drivers/video/omap3_dss.c b/drivers/video/omap3_dss.c
-new file mode 100644
-index 0000000..69c705a
---- /dev/null
-+++ b/drivers/video/omap3_dss.c
-@@ -0,0 +1,130 @@
-+/*
-+ * (C) Copyright 2010
-+ * Texas Instruments, <www.ti.com>
-+ * Syed Mohammed Khasim <khasim@ti.com>
-+ *
-+ * Referred to Linux DSS driver files for OMAP3
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation's version 2 of
-+ * the License.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch/dss.h>
-+
-+/*
-+ * Configure VENC for a given Mode (NTSC / PAL)
-+ */
-+void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
-+				u32 height, u32 width)
-+{
-+	struct venc_regs *venc = (struct venc_regs *) OMAP3_VENC_BASE;
-+	struct dss_regs *dss = (struct dss_regs *) OMAP3_DSS_BASE;
-+	struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
-+
-+	writel(venc_cfg->status, &venc->status);
-+	writel(venc_cfg->f_control, &venc->f_control);
-+	writel(venc_cfg->vidout_ctrl, &venc->vidout_ctrl);
-+	writel(venc_cfg->sync_ctrl, &venc->sync_ctrl);
-+	writel(venc_cfg->llen, &venc->llen);
-+	writel(venc_cfg->flens, &venc->flens);
-+	writel(venc_cfg->hfltr_ctrl, &venc->hfltr_ctrl);
-+	writel(venc_cfg->cc_carr_wss_carr, &venc->cc_carr_wss_carr);
-+	writel(venc_cfg->c_phase, &venc->c_phase);
-+	writel(venc_cfg->gain_u, &venc->gain_u);
-+	writel(venc_cfg->gain_v, &venc->gain_v);
-+	writel(venc_cfg->gain_y, &venc->gain_y);
-+	writel(venc_cfg->black_level, &venc->black_level);
-+	writel(venc_cfg->blank_level, &venc->blank_level);
-+	writel(venc_cfg->x_color, &venc->x_color);
-+	writel(venc_cfg->m_control, &venc->m_control);
-+	writel(venc_cfg->bstamp_wss_data, &venc->bstamp_wss_data);
-+	writel(venc_cfg->s_carr, &venc->s_carr);
-+	writel(venc_cfg->line21, &venc->line21);
-+	writel(venc_cfg->ln_sel, &venc->ln_sel);
-+	writel(venc_cfg->l21__wc_ctl, &venc->l21__wc_ctl);
-+	writel(venc_cfg->htrigger_vtrigger, &venc->htrigger_vtrigger);
-+	writel(venc_cfg->savid__eavid, &venc->savid__eavid);
-+	writel(venc_cfg->flen__fal, &venc->flen__fal);
-+	writel(venc_cfg->lal__phase_reset, &venc->lal__phase_reset);
-+	writel(venc_cfg->hs_int_start_stop_x,
-+				&venc->hs_int_start_stop_x);
-+	writel(venc_cfg->hs_ext_start_stop_x,
-+				&venc->hs_ext_start_stop_x);
-+	writel(venc_cfg->vs_int_start_x, &venc->vs_int_start_x);
-+	writel(venc_cfg->vs_int_stop_x__vs_int_start_y,
-+			&venc->vs_int_stop_x__vs_int_start_y);
-+	writel(venc_cfg->vs_int_stop_y__vs_ext_start_x,
-+			&venc->vs_int_stop_y__vs_ext_start_x);
-+	writel(venc_cfg->vs_ext_stop_x__vs_ext_start_y,
-+			&venc->vs_ext_stop_x__vs_ext_start_y);
-+	writel(venc_cfg->vs_ext_stop_y, &venc->vs_ext_stop_y);
-+	writel(venc_cfg->avid_start_stop_x, &venc->avid_start_stop_x);
-+	writel(venc_cfg->avid_start_stop_y, &venc->avid_start_stop_y);
-+	writel(venc_cfg->fid_int_start_x__fid_int_start_y,
-+				&venc->fid_int_start_x__fid_int_start_y);
-+	writel(venc_cfg->fid_int_offset_y__fid_ext_start_x,
-+				&venc->fid_int_offset_y__fid_ext_start_x);
-+	writel(venc_cfg->fid_ext_start_y__fid_ext_offset_y,
-+				&venc->fid_ext_start_y__fid_ext_offset_y);
-+	writel(venc_cfg->tvdetgp_int_start_stop_x,
-+				&venc->tvdetgp_int_start_stop_x);
-+	writel(venc_cfg->tvdetgp_int_start_stop_y,
-+				&venc->tvdetgp_int_start_stop_y);
-+	writel(venc_cfg->gen_ctrl, &venc->gen_ctrl);
-+	writel(venc_cfg->output_control, &venc->output_control);
-+	writel(venc_cfg->dac_b__dac_c, &venc->dac_b__dac_c);
-+
-+	/* Configure DSS for VENC Settings */
-+	writel(VENC_DSS_CONFIG, &dss->control);
-+
-+	/* Configure height and width for Digital out */
-+	writel(((height << DIG_LPP_SHIFT) | width), &dispc->size_dig);
-+}
-+
-+/*
-+ * Configure Panel Specific Parameters
-+ */
-+void omap3_dss_panel_config(const struct panel_config *panel_cfg)
-+{
-+	struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
-+
-+	writel(panel_cfg->timing_h, &dispc->timing_h);
-+	writel(panel_cfg->timing_v, &dispc->timing_v);
-+	writel(panel_cfg->pol_freq, &dispc->pol_freq);
-+	writel(panel_cfg->divisor, &dispc->divisor);
-+	writel(panel_cfg->lcd_size, &dispc->size_lcd);
-+	writel((panel_cfg->load_mode << FRAME_MODE_SHIFT), &dispc->config);
-+	writel(((panel_cfg->panel_type << TFTSTN_SHIFT) |
-+		(panel_cfg->data_lines << DATALINES_SHIFT)), &dispc->control);
-+	writel(panel_cfg->panel_color, &dispc->default_color0);
-+}
-+
-+/*
-+ * Enable LCD and DIGITAL OUT in DSS
-+ */
-+void omap3_dss_enable(void)
-+{
-+	struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
-+	u32 l = 0;
-+
-+	l = readl(&dispc->control);
-+	l |= DISPC_ENABLE;
-+	writel(l, &dispc->control);
-+}
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0020-video-DSS-makefile-update.patch

@@ -1,30 +0,0 @@
-From ce6813c7f4006331dd661cd25178bb258d1e9469 Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Tue, 19 Apr 2011 14:00:34 -0500
-Subject: [PATCH 20/30] video: DSS makefile update
-
-Adding the OMAP3 DSS video driver to the Makefile.  The patch applied to
-u-boot-ti didn't include this for some reason.
-
-Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- drivers/video/Makefile |    2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/video/Makefile b/drivers/video/Makefile
-index 086dc05..226684a 100644
---- a/drivers/video/Makefile
-+++ b/drivers/video/Makefile
-@@ -41,6 +41,8 @@ COBJS-$(CONFIG_SED156X) += sed156x.o
- COBJS-$(CONFIG_VIDEO_SM501) += sm501.o
- COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o
- COBJS-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
-+COBJS-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o
-+COBJS-y += videomodes.o
- 
- COBJS	:= $(COBJS-y)
- SRCS	:= $(COBJS:.o=.c)
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0021-BeagleBoard-Configure-DVI-S-video.patch

@@ -1,170 +0,0 @@
-From ebabfd9f1e6f712aafc2bba5ddfae530be4119ee Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Tue, 19 Apr 2011 14:01:13 -0500
-Subject: [PATCH 21/30] BeagleBoard: Configure DVI/S-video
-
-Based on patches from Syed Mohammed Khasim (khasim@ti.com).
-
-Configures the output of the BeagleBoard DVI to be orange.
-Configures the output of the BeagleBoard S-Video to be a colorbar.
----
-Updates for this version
-* Rebased on u-boot-ti.
-
-v3
-* Rebased again.
-
-Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- board/ti/beagle/beagle.c |   24 +++++++++++++
- board/ti/beagle/beagle.h |   86 ++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 110 insertions(+), 0 deletions(-)
-
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index a290f89..39d9038 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -164,6 +164,28 @@ unsigned int get_expansion_id(void)
- }
- 
- /*
-+ * Configure DSS to display background color on DVID
-+ * Configure VENC to display color bar on S-Video
-+ */
-+void display_init(void)
-+{
-+	omap3_dss_venc_config(&venc_config_std_tv, VENC_HEIGHT, VENC_WIDTH);
-+	switch (get_board_revision()) {
-+	case REVISION_AXBX:
-+	case REVISION_CX:
-+	case REVISION_C4:
-+		omap3_dss_panel_config(&dvid_cfg);
-+		break;
-+	case REVISION_XM_A:
-+	case REVISION_XM_B:
-+	case REVISION_XM_C:
-+	default:
-+		omap3_dss_panel_config(&dvid_cfg_xm);
-+		break;
-+	}
-+}
-+
-+/*
-  * Routine: misc_init_r
-  * Description: Configure board specific parts
-  */
-@@ -330,6 +352,8 @@ int misc_init_r(void)
- 		GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
- 
- 	dieid_num_r();
-+	display_init();
-+	omap3_dss_enable();
- 
- 	return 0;
- }
-diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
-index 04247cd..18bfaa8 100644
---- a/board/ti/beagle/beagle.h
-+++ b/board/ti/beagle/beagle.h
-@@ -23,6 +23,8 @@
- #ifndef _BEAGLE_H_
- #define _BEAGLE_H_
- 
-+#include <asm/arch/dss.h>
-+
- const omap3_sysinfo sysinfo = {
- 	DDR_STACKED,
- 	"OMAP3 Beagle board",
-@@ -472,4 +474,88 @@ const omap3_sysinfo sysinfo = {
- 	MUX_VAL(CP(MMC2_DAT6),      (IDIS | PTU | EN  | M4)) /*GPIO_138 BT_EN*/\
- 	MUX_VAL(CP(MMC2_DAT7),      (IDIS | PTU | EN  | M4)) /*GPIO_139 WLAN_EN*/
- 
-+/*
-+ * Display Configuration
-+ */
-+
-+#define DVI_BEAGLE_ORANGE_COL		0x00FF8000
-+#define VENC_HEIGHT			0x00ef
-+#define VENC_WIDTH			0x027f
-+
-+/*
-+ * Configure VENC in DSS for Beagle to generate Color Bar
-+ *
-+ * Kindly refer to OMAP TRM for definition of these values.
-+ */
-+static const struct venc_regs venc_config_std_tv = {
-+	.status					= 0x0000001B,
-+	.f_control				= 0x00000040,
-+	.vidout_ctrl				= 0x00000000,
-+	.sync_ctrl				= 0x00008000,
-+	.llen					= 0x00008359,
-+	.flens					= 0x0000020C,
-+	.hfltr_ctrl				= 0x00000000,
-+	.cc_carr_wss_carr			= 0x043F2631,
-+	.c_phase				= 0x00000024,
-+	.gain_u					= 0x00000130,
-+	.gain_v					= 0x00000198,
-+	.gain_y					= 0x000001C0,
-+	.black_level				= 0x0000006A,
-+	.blank_level				= 0x0000005C,
-+	.x_color				= 0x00000000,
-+	.m_control				= 0x00000001,
-+	.bstamp_wss_data			= 0x0000003F,
-+	.s_carr					= 0x21F07C1F,
-+	.line21					= 0x00000000,
-+	.ln_sel					= 0x00000015,
-+	.l21__wc_ctl				= 0x00001400,
-+	.htrigger_vtrigger			= 0x00000000,
-+	.savid__eavid				= 0x069300F4,
-+	.flen__fal				= 0x0016020C,
-+	.lal__phase_reset			= 0x00060107,
-+	.hs_int_start_stop_x			= 0x008D034E,
-+	.hs_ext_start_stop_x			= 0x000F0359,
-+	.vs_int_start_x				= 0x01A00000,
-+	.vs_int_stop_x__vs_int_start_y		= 0x020501A0,
-+	.vs_int_stop_y__vs_ext_start_x		= 0x01AC0024,
-+	.vs_ext_stop_x__vs_ext_start_y		= 0x020D01AC,
-+	.vs_ext_stop_y				= 0x00000006,
-+	.avid_start_stop_x			= 0x03480079,
-+	.avid_start_stop_y			= 0x02040024,
-+	.fid_int_start_x__fid_int_start_y	= 0x0001008A,
-+	.fid_int_offset_y__fid_ext_start_x	= 0x01AC0106,
-+	.fid_ext_start_y__fid_ext_offset_y	= 0x01060006,
-+	.tvdetgp_int_start_stop_x		= 0x00140001,
-+	.tvdetgp_int_start_stop_y		= 0x00010001,
-+	.gen_ctrl				= 0x00FF0000,
-+	.output_control				= 0x0000000D,
-+	.dac_b__dac_c				= 0x00000000
-+};
-+
-+/*
-+ * Configure Timings for DVI D
-+ */
-+static const struct panel_config dvid_cfg = {
-+	.timing_h	= 0x0ff03f31, /* Horizantal timing */
-+	.timing_v	= 0x01400504, /* Vertical timing */
-+	.pol_freq	= 0x00007028, /* Pol Freq */
-+	.divisor	= 0x00010006, /* 72Mhz Pixel Clock */
-+	.lcd_size	= 0x02ff03ff, /* 1024x768 */
-+	.panel_type	= 0x01, /* TFT */
-+	.data_lines	= 0x03, /* 24 Bit RGB */
-+	.load_mode	= 0x02, /* Frame Mode */
-+	.panel_color	= DVI_BEAGLE_ORANGE_COL /* ORANGE */
-+};
-+
-+static const struct panel_config dvid_cfg_xm = {
-+	.timing_h	= 0x1a4024c9, /* Horizantal timing */
-+	.timing_v	= 0x02c00509, /* Vertical timing */
-+	.pol_freq	= 0x00007028, /* Pol Freq */
-+	.divisor	= 0x00010001, /* 96MHz Pixel Clock */
-+	.lcd_size	= 0x02ff03ff, /* 1024x768 */
-+	.panel_type	= 0x01, /* TFT */
-+	.data_lines	= 0x03, /* 24 Bit RGB */
-+	.load_mode	= 0x02, /* Frame Mode */
-+	.panel_color	= DVI_BEAGLE_ORANGE_COL /* ORANGE */
-+};
- #endif
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0022-BeagleBoard-config-enable-DSS.patch

@@ -1,25 +0,0 @@
-From 79b347db36d583b0fde360baa780877b3a7ae754 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Tue, 21 Jun 2011 22:18:01 +0200
-Subject: [PATCH 22/30] BeagleBoard: config: enable DSS
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/omap3_beagle.h |    1 +
- 1 files changed, 1 insertions(+), 0 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 5c32265..6c842ad 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -172,6 +172,7 @@
- #define CONFIG_SYS_I2C_BUS_SELECT	1
- #define CONFIG_I2C_MULTI_BUS		1
- #define CONFIG_DRIVER_OMAP34XX_I2C	1
-+#define CONFIG_VIDEO_OMAP3	/* DSS Support			*/
- 
- /*
-  * TWL4030
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0023-BeagleBoard-Added-userbutton-command.patch

@@ -1,107 +0,0 @@
-From b6082310a74ef48b8c2c4c67092896563141a4ad Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Wed, 21 Jul 2010 07:41:25 -0500
-Subject: [PATCH 23/30] BeagleBoard: Added userbutton command
-
-Based on commit f1099c7c43caf5bac3bf6a65aa266fade4747072
-    Author: Greg Turner <gregturner@ti.com>
-    Date:   Tue May 25 09:19:06 2010 -0500
-
-    New u-boot command for status of USER button on BeagleBoard-xM
-
-         Modified bootcmd to check the staus at boot time and set
-	 filename of the boot script.
-
-* Moved to a BeagleBoard specific file.
-* Removed changes to default boot command from adding userbutton
-  command.
-* Made to handle pre-xM boards.
-* Flipped polarity of the return value to avoid confusion.  Success (0)
-  is when the button is pressed.  Failure (1) is when the button is NOT
-  pressed.
-* Used latest revision getting function.
-* Used latest macros for board revision.
---
-v2 update:
-* Added xM-C revision definition (optional, since it was default)
-
-Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- board/ti/beagle/beagle.c |   56 ++++++++++++++++++++++++++++++++++++++++++++++
- 1 files changed, 56 insertions(+), 0 deletions(-)
-
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index 39d9038..4798194 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -50,6 +50,7 @@ extern struct ehci_hccr *hccr;
- extern volatile struct ehci_hcor *hcor;
- #endif
- #include "beagle.h"
-+#include <command.h>
- 
- #define pr_debug(fmt, args...) debug(fmt, ##args)
- 
-@@ -477,3 +478,58 @@ int ehci_hcd_init(void)
- }
- 
- #endif /* CONFIG_USB_EHCI */
-+
-+/*
-+ * This command returns the status of the user button on beagle xM
-+ * Input - none
-+ * Returns - 	1 if button is held down
-+ *		0 if button is not held down
-+ */
-+int do_userbutton (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+	int     button = 0;
-+	int	gpio;
-+
-+	/*
-+	 * pass address parameter as argv[0] (aka command name),
-+	 * and all remaining args
-+	 */
-+	switch (get_board_revision()) {
-+	case REVISION_AXBX:
-+	case REVISION_CX:
-+	case REVISION_C4:
-+		gpio = 7;
-+		break;
-+	case REVISION_XM_A:
-+	case REVISION_XM_B:
-+	case REVISION_XM_C:
-+	default:
-+		gpio = 4;
-+		break;
-+	}
-+	omap_request_gpio(gpio);
-+	omap_set_gpio_direction(gpio, 1);
-+	printf("The user button is currently ");
-+	if(omap_get_gpio_datain(gpio))
-+	{
-+		button = 1;
-+		printf("PRESSED.\n");
-+	}
-+	else
-+	{
-+		button = 0;
-+		printf("NOT pressed.\n");
-+	}
-+
-+	omap_free_gpio(gpio);
-+
-+	return !button;
-+}
-+
-+/* -------------------------------------------------------------------- */
-+
-+U_BOOT_CMD(
-+	userbutton, CONFIG_SYS_MAXARGS, 1,	do_userbutton,
-+	"Return the status of the BeagleBoard USER button",
-+	""
-+);
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0024-Corrected-LED-name-match-finding-avoiding-extraneous.patch

@@ -1,44 +0,0 @@
-From 657f4308df123f3d2bd82c87bf667dd529d0f7c6 Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Tue, 8 Mar 2011 20:42:01 -0600
-Subject: [PATCH 24/30] Corrected LED name match finding avoiding extraneous Usage printouts
-
-Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- common/cmd_led.c |    5 +++--
- 1 files changed, 3 insertions(+), 2 deletions(-)
-
-diff --git a/common/cmd_led.c b/common/cmd_led.c
-index c53195f..8b46848 100644
---- a/common/cmd_led.c
-+++ b/common/cmd_led.c
-@@ -83,7 +83,7 @@ int str_onoff (char *var)
- 
- int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
- {
--	int state, i;
-+	int state, i, match = 0;
- 
- 	/* Validate arguments */
- 	if ((argc != 3)) {
-@@ -98,6 +98,7 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
- 	for (i = 0; led_commands[i].string; i++) {
- 		if ((strcmp("all", argv[1]) == 0) ||
- 		    (strcmp(led_commands[i].string, argv[1]) == 0)) {
-+		    	match = 1;
- 			if (led_commands[i].on) {
- 				if (state) {
- 					led_commands[i].on();
-@@ -112,7 +113,7 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
- 	}
- 
- 	/* If we ran out of matches, print Usage */
--	if (!led_commands[i].string && !(strcmp("all", argv[1]) == 0)) {
-+	if (!match) {
- 		return cmd_usage(cmdtp);
- 	}
- 
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0025-BeagleBoard-fix-LED-0-1-in-driver.patch

@@ -1,31 +0,0 @@
-From c510bdc2684b5a755c4526071f1f3ca726ac1d1d Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Tue, 19 Apr 2011 10:55:26 -0500
-Subject: [PATCH 25/30] BeagleBoard: fix LED 0/1 in driver
-
-Fixed USR0/USR1 to be LED 0/1 respectively
-
-Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- board/ti/beagle/led.c |    4 ++--
- 1 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/board/ti/beagle/led.c b/board/ti/beagle/led.c
-index 08f95a0..d3de51f 100644
---- a/board/ti/beagle/led.c
-+++ b/board/ti/beagle/led.c
-@@ -27,8 +27,8 @@
- static unsigned int saved_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF};
- 
- /* GPIO pins for the LEDs */
--#define BEAGLE_LED_USR0	149
--#define BEAGLE_LED_USR1	150
-+#define BEAGLE_LED_USR0	150
-+#define BEAGLE_LED_USR1	149
- 
- #ifdef STATUS_LED_GREEN
- void green_LED_off (void)
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0026-led-added-cmd_led-to-Makefile.patch

@@ -1,29 +0,0 @@
-From 6aac1cb7f47d7126be80df2e06042d37f1affce2 Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Wed, 20 Apr 2011 18:11:38 -0500
-Subject: [PATCH 26/30] led: added cmd_led to Makefile
-
-Addition of cmd_led into the Makefile wasn't included in the patch
-applied to u-boot-ti.
-
-Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- common/Makefile |    1 +
- 1 files changed, 1 insertions(+), 0 deletions(-)
-
-diff --git a/common/Makefile b/common/Makefile
-index 224b7cc..7445ccc 100644
---- a/common/Makefile
-+++ b/common/Makefile
-@@ -107,6 +107,7 @@ COBJS-$(CONFIG_CMD_ITEST) += cmd_itest.o
- COBJS-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o
- COBJS-$(CONFIG_CMD_CRAMFS) += cmd_cramfs.o
- COBJS-$(CONFIG_CMD_LDRINFO) += cmd_ldrinfo.o
-+COBJS-$(CONFIG_CMD_LED) += cmd_led.o
- COBJS-$(CONFIG_CMD_LICENSE) += cmd_license.o
- COBJS-y += cmd_load.o
- COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0027-led-correct-off-on-locations-in-structure.patch

@@ -1,36 +0,0 @@
-From 48393aa0119882009df057c974f0dec6051eff79 Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Wed, 20 Apr 2011 18:13:49 -0500
-Subject: [PATCH 27/30] led: correct off/on locations in structure
-
-Although the initialization should probably be done with names, the
-existing implementation has these structures filled in the opposite
-order.
-
-Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
---
-v2 changes:
-* Corrected comment as well.
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- common/cmd_led.c |    4 ++--
- 1 files changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/common/cmd_led.c b/common/cmd_led.c
-index 8b46848..d14dd5a 100644
---- a/common/cmd_led.c
-+++ b/common/cmd_led.c
-@@ -34,8 +34,8 @@
- struct led_tbl_s {
- 	char		*string;	/* String for use in the command */
- 	led_id_t	mask;		/* Mask used for calling __led_set() */
--	void		(*on)(void);	/* Optional fucntion for turning LED on */
--	void		(*off)(void);	/* Optional fucntion for turning LED on */
-+	void		(*off)(void);	/* Optional function for turning LED off */
-+	void		(*on)(void);	/* Optional function for turning LED on */
- };
- 
- typedef struct led_tbl_s led_tbl_t;
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0028-BeagleBoard-config-make-mtest-run.patch

@@ -1,36 +0,0 @@
-From 747f8f93a4e1d461340ddc04d3843d58565bab30 Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Tue, 19 Apr 2011 11:58:54 -0500
-Subject: [PATCH 28/30] BeagleBoard: config: make mtest run
-
-Utilize the alternate mtest and define a valid region.
-
-Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/omap3_beagle.h |    9 +++++----
- 1 files changed, 5 insertions(+), 4 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 6c842ad..3bbc235 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -292,10 +292,11 @@
- /* Boot Argument Buffer Size */
- #define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
- 
--#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
--								/* works on */
--#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
--					0x01F00000) /* 31MB */
-+#define CONFIG_SYS_ALT_MEMTEST		1
-+#define CONFIG_SYS_MEMTEST_START	(0x82000000)		/* memtest */
-+								/* defaults */
-+#define CONFIG_SYS_MEMTEST_END		(0x87FFFFFF) 		/* 128MB */
-+#define CONFIG_SYS_MEMTEST_SCRATCH	(0x81000000)	/* dummy address */
- 
- #define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
- 							/* load address */
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0029-BeagleBoard-config-increase-command-line-functionali.patch

@@ -1,42 +0,0 @@
-From c75471405166cba2327680cc4e4d204f05007c54 Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Tue, 19 Apr 2011 11:50:55 -0500
-Subject: [PATCH 29/30] BeagleBoard: config: increase command-line functionality
-
-Enable the expression evaluator.
-
-Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/omap3_beagle.h |    5 +++--
- 1 files changed, 3 insertions(+), 2 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 3bbc235..55973fb 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -158,6 +158,7 @@
- #define CONFIG_CMD_NFS      /* NFS support          */
- #define CONFIG_CMD_PING
- #define CONFIG_CMD_DHCP
-+#define CONFIG_CMD_SETEXPR	/* Evaluate expressions		*/
- 
- #undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
- #undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
-@@ -284,11 +285,11 @@
- #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
- #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
- #define CONFIG_SYS_PROMPT		"OMAP3 beagleboard.org # "
--#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-+#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
- /* Print Buffer Size */
- #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
- 					sizeof(CONFIG_SYS_PROMPT) + 16)
--#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-+#define CONFIG_SYS_MAXARGS		32	/* max number of command args */
- /* Boot Argument Buffer Size */
- #define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
- 
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0030-BeagleBoard-config-add-optargs-buddy-camera.patch

@@ -1,51 +0,0 @@
-From 0e384ea7bc94d8626c0280f7c0151f99fbc83008 Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Tue, 19 Apr 2011 12:09:18 -0500
-Subject: [PATCH 30/30] BeagleBoard: config: add optargs/buddy/camera
-
-buddy and camera are used to configure peripherals in the kernel at boot
-time that cannot easily be detected by the kernel.
-
-Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/omap3_beagle.h |    6 ++++++
- 1 files changed, 6 insertions(+), 0 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 55973fb..024cb9a 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -214,6 +214,8 @@
- 	"console=ttyO2,115200n8\0" \
- 	"mpurate=auto\0" \
- 	"buddy=none "\
-+	"optargs=\0" \
-+	"camera=none\0" \
- 	"vram=12M\0" \
- 	"dvimode=1024x768MR-16@60\0" \
- 	"defaultdisplay=dvi\0" \
-@@ -223,16 +225,20 @@
- 	"nandroot=/dev/mtdblock4 rw\0" \
- 	"nandrootfstype=jffs2\0" \
- 	"mmcargs=setenv bootargs console=${console} " \
-+		"${optargs} " \
- 		"mpurate=${mpurate} " \
- 		"buddy=${buddy} "\
-+		"camera=${camera} "\
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
- 		"omapdss.def_disp=${defaultdisplay} " \
- 		"root=${mmcroot} " \
- 		"rootfstype=${mmcrootfstype}\0" \
- 	"nandargs=setenv bootargs console=${console} " \
-+		"${optargs} " \
- 		"mpurate=${mpurate} " \
- 		"buddy=${buddy} "\
-+		"camera=${camera} "\
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
- 		"omapdss.def_disp=${defaultdisplay} " \
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0031-omap4-add-support-for-gpios.patch

@@ -1,306 +0,0 @@
-From b2395bf32d0475dd4a729155e94e5d1605c54362 Mon Sep 17 00:00:00 2001
-From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
-Date: Mon, 9 May 2011 18:04:49 -0300
-Subject: [PATCH 31/35] omap4: add support for gpios
-
-Copied from omap3.
-
-Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- arch/arm/cpu/armv7/omap4/Makefile      |    1 +
- arch/arm/cpu/armv7/omap4/gpio.c        |  169 ++++++++++++++++++++++++++++++++
- arch/arm/include/asm/arch-omap4/gpio.h |   93 +++++++++++++++++
- 3 files changed, 263 insertions(+), 0 deletions(-)
- create mode 100644 arch/arm/cpu/armv7/omap4/gpio.c
- create mode 100644 arch/arm/include/asm/arch-omap4/gpio.h
-
-diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile
-index 987dc9d..c39693a 100644
---- a/arch/arm/cpu/armv7/omap4/Makefile
-+++ b/arch/arm/cpu/armv7/omap4/Makefile
-@@ -29,6 +29,7 @@ SOBJS	+= lowlevel_init.o
- 
- COBJS	+= board.o
- COBJS	+= mem.o
-+COBJS	+= gpio.o
- COBJS	+= sys_info.o
- 
- SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-diff --git a/arch/arm/cpu/armv7/omap4/gpio.c b/arch/arm/cpu/armv7/omap4/gpio.c
-new file mode 100644
-index 0000000..40f1d5e
---- /dev/null
-+++ b/arch/arm/cpu/armv7/omap4/gpio.c
-@@ -0,0 +1,169 @@
-+/*
-+ * Lifted from arch/arm/cpu/armv7/omap3/gpio.c
-+ *
-+ * Original Copyright (c) 2009 Wind River Systems, Inc.
-+ * Tom Rix <Tom.Rix@windriver.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ *
-+ * This work is derived from the linux 2.6.27 kernel source
-+ * To fetch, use the kernel repository
-+ * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
-+ * Use the v2.6.27 tag.
-+ *
-+ * Below is the original's header including its copyright
-+ *
-+ *  linux/arch/arm/plat-omap/gpio.c
-+ *
-+ * Support functions for OMAP GPIO
-+ *
-+ * Copyright (C) 2003-2005 Nokia Corporation
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <common.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/io.h>
-+#include <asm/errno.h>
-+
-+/*
-+ * OMAP44XX  specific GPIO registers
-+ */
-+#define OMAP44XX_GPIO1_BASE             0x4a310000
-+#define OMAP44XX_GPIO2_BASE             0x48055000
-+#define OMAP44XX_GPIO3_BASE             0x48057000
-+#define OMAP44XX_GPIO4_BASE             0x48059000
-+#define OMAP44XX_GPIO5_BASE             0x4805B000
-+#define OMAP44XX_GPIO6_BASE             0x4805D000
-+
-+static const struct gpio_bank gpio_bank_44xx[6] = {
-+	{ (void *)OMAP44XX_GPIO1_BASE },
-+	{ (void *)OMAP44XX_GPIO2_BASE },
-+	{ (void *)OMAP44XX_GPIO3_BASE },
-+	{ (void *)OMAP44XX_GPIO4_BASE },
-+	{ (void *)OMAP44XX_GPIO5_BASE },
-+	{ (void *)OMAP44XX_GPIO6_BASE },
-+};
-+
-+static struct gpio_bank *gpio_bank = &gpio_bank_44xx[0];
-+
-+static inline struct gpio_bank *get_gpio_bank(int gpio)
-+{
-+	return &gpio_bank[gpio >> 5];
-+}
-+
-+static inline int get_gpio_index(int gpio)
-+{
-+	return gpio & 0x1f;
-+}
-+
-+static inline int gpio_valid(int gpio)
-+{
-+	if (gpio < 0)
-+		return -1;
-+	if (gpio < 192)
-+		return 0;
-+	return -1;
-+}
-+
-+static int check_gpio(int gpio)
-+{
-+	if (gpio_valid(gpio) < 0) {
-+		printf("ERROR : check_gpio: invalid GPIO %d\n", gpio);
-+		return -1;
-+	}
-+	return 0;
-+}
-+
-+static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
-+{
-+	void *reg;
-+	u32 l;
-+
-+	reg = bank->base + OMAP4_GPIO_OE;
-+	l = __raw_readl(reg);
-+	if (is_input)
-+		l |= 1 << gpio;
-+	else
-+		l &= ~(1 << gpio);
-+	__raw_writel(l, reg);
-+}
-+
-+void omap_set_gpio_direction(int gpio, int is_input)
-+{
-+	struct gpio_bank *bank;
-+
-+	if (check_gpio(gpio) < 0)
-+		return;
-+	bank = get_gpio_bank(gpio);
-+	_set_gpio_direction(bank, get_gpio_index(gpio), is_input);
-+}
-+
-+static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
-+{
-+	if (enable)
-+		__raw_writel(1 << gpio, bank->base + OMAP4_GPIO_SETDATAOUT);
-+	else
-+		__raw_writel(1 << gpio, bank->base + OMAP4_GPIO_CLEARDATAOUT);
-+}
-+
-+void omap_set_gpio_dataout(int gpio, int enable)
-+{
-+	struct gpio_bank *bank;
-+
-+	if (check_gpio(gpio) < 0)
-+		return;
-+	bank = get_gpio_bank(gpio);
-+	_set_gpio_dataout(bank, get_gpio_index(gpio), enable);
-+}
-+
-+int omap_get_gpio_datain(int gpio)
-+{
-+	struct gpio_bank *bank;
-+
-+	if (check_gpio(gpio) < 0)
-+		return -EINVAL;
-+	bank = get_gpio_bank(gpio);
-+	return (__raw_readl(bank->base + OMAP4_GPIO_DATAIN)
-+		& (1 << get_gpio_index(gpio))) != 0;
-+}
-+
-+static void _reset_gpio(struct gpio_bank *bank, int gpio)
-+{
-+	_set_gpio_direction(bank, get_gpio_index(gpio), 1);
-+}
-+
-+int omap_request_gpio(int gpio)
-+{
-+	if (check_gpio(gpio) < 0)
-+		return -EINVAL;
-+
-+	return 0;
-+}
-+
-+void omap_free_gpio(int gpio)
-+{
-+	struct gpio_bank *bank;
-+
-+	if (check_gpio(gpio) < 0)
-+		return;
-+	bank = get_gpio_bank(gpio);
-+
-+	_reset_gpio(bank, gpio);
-+}
-diff --git a/arch/arm/include/asm/arch-omap4/gpio.h b/arch/arm/include/asm/arch-omap4/gpio.h
-new file mode 100644
-index 0000000..d4dbea4
---- /dev/null
-+++ b/arch/arm/include/asm/arch-omap4/gpio.h
-@@ -0,0 +1,93 @@
-+/*
-+ * Copyright (c) 2009 Wind River Systems, Inc.
-+ * Tom Rix <Tom.Rix@windriver.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ *
-+ * This work is derived from the linux 2.6.27 kernel source
-+ * To fetch, use the kernel repository
-+ * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
-+ * Use the v2.6.27 tag.
-+ *
-+ * Below is the original's header including its copyright
-+ *
-+ *  linux/arch/arm/plat-omap/gpio.c
-+ *
-+ * Support functions for OMAP GPIO
-+ *
-+ * Copyright (C) 2003-2005 Nokia Corporation
-+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef _GPIO_H
-+#define _GPIO_H
-+
-+#define OMAP4_GPIO_REVISION		0x0000
-+#define OMAP4_GPIO_SYSCONFIG		0x0010
-+#define OMAP4_GPIO_EOI			0x0020
-+#define OMAP4_GPIO_IRQSTATUSRAW0	0x0024
-+#define OMAP4_GPIO_IRQSTATUSRAW1	0x0028
-+#define OMAP4_GPIO_IRQSTATUS0		0x002c
-+#define OMAP4_GPIO_IRQSTATUS1		0x0030
-+#define OMAP4_GPIO_IRQSTATUSSET0	0x0034
-+#define OMAP4_GPIO_IRQSTATUSSET1	0x0038
-+#define OMAP4_GPIO_IRQSTATUSCLR0	0x003c
-+#define OMAP4_GPIO_IRQSTATUSCLR1	0x0040
-+#define OMAP4_GPIO_IRQWAKEN0		0x0044
-+#define OMAP4_GPIO_IRQWAKEN1		0x0048
-+#define OMAP4_GPIO_SYSSTATUS		0x0114
-+#define OMAP4_GPIO_IRQENABLE1		0x011c
-+#define OMAP4_GPIO_WAKE_EN		0x0120
-+#define OMAP4_GPIO_IRQSTATUS2		0x0128
-+#define OMAP4_GPIO_IRQENABLE2		0x012c
-+#define OMAP4_GPIO_CTRL			0x0130
-+#define OMAP4_GPIO_OE			0x0134
-+#define OMAP4_GPIO_DATAIN		0x0138
-+#define OMAP4_GPIO_DATAOUT		0x013c
-+#define OMAP4_GPIO_LEVELDETECT0		0x0140
-+#define OMAP4_GPIO_LEVELDETECT1		0x0144
-+#define OMAP4_GPIO_RISINGDETECT		0x0148
-+#define OMAP4_GPIO_FALLINGDETECT	0x014c
-+#define OMAP4_GPIO_DEBOUNCENABLE	0x0150
-+#define OMAP4_GPIO_DEBOUNCINGTIME	0x0154
-+#define OMAP4_GPIO_CLEARIRQENABLE1	0x0160
-+#define OMAP4_GPIO_SETIRQENABLE1	0x0164
-+#define OMAP4_GPIO_CLEARWKUENA		0x0180
-+#define OMAP4_GPIO_SETWKUENA		0x0184
-+#define OMAP4_GPIO_CLEARDATAOUT		0x0190
-+#define OMAP4_GPIO_SETDATAOUT		0x0194
-+
-+struct gpio_bank {
-+	void *base;
-+};
-+
-+/* This is the interface */
-+
-+/* Request a gpio before using it */
-+int omap_request_gpio(int gpio);
-+/* Reset and free a gpio after using it */
-+void omap_free_gpio(int gpio);
-+/* Sets the gpio as input or output */
-+void omap_set_gpio_direction(int gpio, int is_input);
-+/* Set or clear a gpio output */
-+void omap_set_gpio_dataout(int gpio, int enable);
-+/* Get the value of a gpio input */
-+int omap_get_gpio_datain(int gpio);
-+
-+#endif /* _GPIO_H_ */
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0032-omap4-add-support-for-EHCI.patch

@@ -1,322 +0,0 @@
-From a2536d64065297279726a71e0af04a5f677f675c Mon Sep 17 00:00:00 2001
-From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
-Date: Mon, 9 May 2011 23:04:50 +0200
-Subject: [PATCH 32/35] omap4: add support for EHCI
-
-As board may need some specific support, implement inner functions
-to be called by the boards implementaions of ehci_hcd_start,
-ehci_hcd_stop.
-
-Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- arch/arm/include/asm/arch-omap4/ehci.h |    8 +
- drivers/usb/host/Makefile              |    1 +
- drivers/usb/host/ehci-omap4.c          |  268 ++++++++++++++++++++++++++++++++
- 3 files changed, 277 insertions(+), 0 deletions(-)
- create mode 100644 arch/arm/include/asm/arch-omap4/ehci.h
- create mode 100644 drivers/usb/host/ehci-omap4.c
-
-diff --git a/arch/arm/include/asm/arch-omap4/ehci.h b/arch/arm/include/asm/arch-omap4/ehci.h
-new file mode 100644
-index 0000000..fc84f6a
---- /dev/null
-+++ b/arch/arm/include/asm/arch-omap4/ehci.h
-@@ -0,0 +1,8 @@
-+#ifndef EHCI_H
-+#define EHCI_H
-+
-+int omap4_ehci_hcd_init(void);
-+
-+int omap4_ehci_hcd_stop(void);
-+
-+#endif /* EHCI_H */
-diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
-index 51b2494..5a5b971 100644
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -46,6 +46,7 @@ COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
- COBJS-$(CONFIG_USB_EHCI_KIRKWOOD) += ehci-kirkwood.o
- COBJS-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
- COBJS-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
-+COBJS-$(CONFIG_USB_EHCI_OMAP4) += ehci-omap4.o
- 
- COBJS	:= $(COBJS-y)
- SRCS	:= $(COBJS:.o=.c)
-diff --git a/drivers/usb/host/ehci-omap4.c b/drivers/usb/host/ehci-omap4.c
-new file mode 100644
-index 0000000..19cd286
---- /dev/null
-+++ b/drivers/usb/host/ehci-omap4.c
-@@ -0,0 +1,268 @@
-+/*
-+ * OMAP4 EHCI port, copied from linux/drivers/usb/host/ehci-omap.c
-+ *
-+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
-+ *	Author: Vikram Pandita <vikram.pandita@ti.com>
-+ *	Author: Anand Gadiyar <gadiyar@ti.com>
-+ */
-+
-+#include <common.h>
-+#include <usb.h>
-+#include <errno.h>
-+#include <asm/io.h>
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/omap4.h>
-+#include <asm/arch/sys_proto.h>
-+
-+#include "ehci.h"
-+#include "ehci-core.h"
-+
-+#define EHCI_BASE (OMAP44XX_L4_CORE_BASE + 0x64C00)
-+#define UHH_BASE (OMAP44XX_L4_CORE_BASE + 0x64000)
-+#define TLL_BASE (OMAP44XX_L4_CORE_BASE + 0x62000)
-+
-+/* ULPI */
-+#define ULPI_SET(a)				(a + 1)
-+#define ULPI_CLR(a)				(a + 2)
-+
-+#define ULPI_FUNC_CTRL				0x04
-+
-+#define ULPI_FUNC_CTRL_RESET			(1 << 5)
-+
-+/* TLL Register Set */
-+#define	OMAP_USBTLL_REVISION				(0x00)
-+#define	OMAP_USBTLL_SYSCONFIG				(0x10)
-+#define	OMAP_USBTLL_SYSCONFIG_CACTIVITY			(1 << 8)
-+#define	OMAP_USBTLL_SYSCONFIG_SIDLEMODE			(1 << 3)
-+#define	OMAP_USBTLL_SYSCONFIG_ENAWAKEUP			(1 << 2)
-+#define	OMAP_USBTLL_SYSCONFIG_SOFTRESET			(1 << 1)
-+#define	OMAP_USBTLL_SYSCONFIG_AUTOIDLE			(1 << 0)
-+
-+#define	OMAP_USBTLL_SYSSTATUS				(0x14)
-+#define	OMAP_USBTLL_SYSSTATUS_RESETDONE			(1 << 0)
-+
-+#define	OMAP_USBTLL_IRQSTATUS				(0x18)
-+#define	OMAP_USBTLL_IRQENABLE				(0x1C)
-+
-+#define	OMAP_TLL_SHARED_CONF				(0x30)
-+#define	OMAP_TLL_SHARED_CONF_USB_90D_DDR_EN		(1 << 6)
-+#define	OMAP_TLL_SHARED_CONF_USB_180D_SDR_EN		(1 << 5)
-+#define	OMAP_TLL_SHARED_CONF_USB_DIVRATION		(1 << 2)
-+#define	OMAP_TLL_SHARED_CONF_FCLK_REQ			(1 << 1)
-+#define	OMAP_TLL_SHARED_CONF_FCLK_IS_ON			(1 << 0)
-+
-+#define	OMAP_TLL_CHANNEL_CONF(num)			(0x040 + 0x004 * num)
-+#define	OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF		(1 << 11)
-+#define	OMAP_TLL_CHANNEL_CONF_ULPI_ULPIAUTOIDLE		(1 << 10)
-+#define	OMAP_TLL_CHANNEL_CONF_UTMIAUTOIDLE		(1 << 9)
-+#define	OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE		(1 << 8)
-+#define	OMAP_TLL_CHANNEL_CONF_CHANEN			(1 << 0)
-+
-+#define	OMAP_TLL_ULPI_FUNCTION_CTRL(num)		(0x804 + 0x100 * num)
-+#define	OMAP_TLL_ULPI_INTERFACE_CTRL(num)		(0x807 + 0x100 * num)
-+#define	OMAP_TLL_ULPI_OTG_CTRL(num)			(0x80A + 0x100 * num)
-+#define	OMAP_TLL_ULPI_INT_EN_RISE(num)			(0x80D + 0x100 * num)
-+#define	OMAP_TLL_ULPI_INT_EN_FALL(num)			(0x810 + 0x100 * num)
-+#define	OMAP_TLL_ULPI_INT_STATUS(num)			(0x813 + 0x100 * num)
-+#define	OMAP_TLL_ULPI_INT_LATCH(num)			(0x814 + 0x100 * num)
-+#define	OMAP_TLL_ULPI_DEBUG(num)			(0x815 + 0x100 * num)
-+#define	OMAP_TLL_ULPI_SCRATCH_REGISTER(num)		(0x816 + 0x100 * num)
-+
-+#define OMAP_TLL_CHANNEL_COUNT				3
-+#define OMAP_TLL_CHANNEL_1_EN_MASK			(1 << 1)
-+#define OMAP_TLL_CHANNEL_2_EN_MASK			(1 << 2)
-+#define OMAP_TLL_CHANNEL_3_EN_MASK			(1 << 4)
-+
-+/* UHH Register Set */
-+#define	OMAP_UHH_REVISION				(0x00)
-+#define	OMAP_UHH_SYSCONFIG				(0x10)
-+#define	OMAP_UHH_SYSCONFIG_MIDLEMODE			(1 << 12)
-+#define	OMAP_UHH_SYSCONFIG_CACTIVITY			(1 << 8)
-+#define	OMAP_UHH_SYSCONFIG_SIDLEMODE			(1 << 3)
-+#define	OMAP_UHH_SYSCONFIG_ENAWAKEUP			(1 << 2)
-+#define	OMAP_UHH_SYSCONFIG_SOFTRESET			(1 << 1)
-+#define	OMAP_UHH_SYSCONFIG_AUTOIDLE			(1 << 0)
-+
-+#define	OMAP_UHH_SYSSTATUS				(0x14)
-+#define	OMAP_UHH_HOSTCONFIG				(0x40)
-+#define	OMAP_UHH_HOSTCONFIG_ULPI_BYPASS			(1 << 0)
-+#define	OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS		(1 << 0)
-+#define	OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS		(1 << 11)
-+#define	OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS		(1 << 12)
-+#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN		(1 << 2)
-+#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN		(1 << 3)
-+#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN		(1 << 4)
-+#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN		(1 << 5)
-+#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS		(1 << 8)
-+#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS		(1 << 9)
-+#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS		(1 << 10)
-+
-+/* OMAP4-specific defines */
-+#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR		(3 << 2)
-+#define OMAP4_UHH_SYSCONFIG_NOIDLE			(1 << 2)
-+
-+#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR		(3 << 4)
-+#define OMAP4_UHH_SYSCONFIG_NOSTDBY			(1 << 4)
-+#define OMAP4_UHH_SYSCONFIG_SOFTRESET			(1 << 0)
-+
-+#define OMAP4_P1_MODE_CLEAR				(3 << 16)
-+#define OMAP4_P1_MODE_TLL				(1 << 16)
-+#define OMAP4_P1_MODE_HSIC				(3 << 16)
-+#define OMAP4_P2_MODE_CLEAR				(3 << 18)
-+#define OMAP4_P2_MODE_TLL				(1 << 18)
-+#define OMAP4_P2_MODE_HSIC				(3 << 18)
-+
-+#define OMAP_REV2_TLL_CHANNEL_COUNT			2
-+
-+#define	OMAP_UHH_DEBUG_CSR				(0x44)
-+
-+/* EHCI Register Set */
-+#define EHCI_INSNREG04					(0xA0)
-+#define EHCI_INSNREG04_DISABLE_UNSUSPEND		(1 << 5)
-+#define	EHCI_INSNREG05_ULPI				(0xA4)
-+#define	EHCI_INSNREG05_ULPI_CONTROL_SHIFT		31
-+#define	EHCI_INSNREG05_ULPI_PORTSEL_SHIFT		24
-+#define	EHCI_INSNREG05_ULPI_OPSEL_SHIFT			22
-+#define	EHCI_INSNREG05_ULPI_REGADD_SHIFT		16
-+#define	EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT		8
-+#define	EHCI_INSNREG05_ULPI_WRDATA_SHIFT		0
-+
-+int omap4_ehci_hcd_init(void)
-+{
-+	unsigned long base = get_timer(0);
-+	unsigned reg = 0, port = 0;
-+	int rc;
-+
-+	/* USB host, with clock from external phy as port 1 UTMI clock */
-+	sr32((void *)0x4A009358, 0, 32, 0x01000002);
-+
-+	/* FSUSB clk */
-+	sr32((void *)0x4a0093d0, 0, 32, 0x2);
-+
-+	/* USB TLL clock */
-+	sr32((void *)0x4a009368, 0, 32, 0x1);
-+
-+	/* enable the 32K, 48M optional clocks and enable the module */
-+	sr32((void *)0x4a0093e0, 0, 32, 0x301);
-+
-+	/* perform TLL soft reset, and wait until reset is complete */
-+	writel(OMAP_USBTLL_SYSCONFIG_SOFTRESET,
-+	       TLL_BASE + OMAP_USBTLL_SYSCONFIG);
-+
-+	/* Wait for TLL reset to complete */
-+	while (!(readl(TLL_BASE + OMAP_USBTLL_SYSSTATUS)
-+		 & OMAP_USBTLL_SYSSTATUS_RESETDONE))
-+		if (get_timer(base) > CONFIG_SYS_HZ) {
-+			printf("OMAP4 EHCI error: timeout resetting TLL\n");
-+			return -1;
-+		}
-+
-+	writel(OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
-+	       OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
-+	       OMAP_USBTLL_SYSCONFIG_CACTIVITY,
-+	       TLL_BASE + OMAP_USBTLL_SYSCONFIG);
-+
-+	/* Put UHH in NoIdle/NoStandby mode */
-+	reg = readl(UHH_BASE + OMAP_UHH_SYSCONFIG);
-+	reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
-+	reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
-+	reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
-+	reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
-+	writel(reg, UHH_BASE + OMAP_UHH_SYSCONFIG);
-+
-+	reg = readl(UHH_BASE + OMAP_UHH_HOSTCONFIG);
-+
-+	/* setup ULPI bypass and burst configurations */
-+	reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
-+			| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
-+			| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
-+	reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
-+
-+	/* Clear port mode fields for PHY mode*/
-+	reg &= ~OMAP4_P1_MODE_CLEAR;
-+	reg &= ~OMAP4_P2_MODE_CLEAR;
-+	writel(reg, UHH_BASE + OMAP_UHH_HOSTCONFIG);
-+
-+	/*
-+	 * An undocumented "feature" in the OMAP3 EHCI controller,
-+	 * causes suspended ports to be taken out of suspend when
-+	 * the USBCMD.Run/Stop bit is cleared (for example when
-+	 * we do ehci_bus_suspend).
-+	 * This breaks suspend-resume if the root-hub is allowed
-+	 * to suspend. Writing 1 to this undocumented register bit
-+	 * disables this feature and restores normal behavior.
-+	 */
-+	writel(EHCI_INSNREG04_DISABLE_UNSUSPEND, EHCI_BASE + EHCI_INSNREG04);
-+
-+	reg = ULPI_FUNC_CTRL_RESET
-+		/* FUNCTION_CTRL_SET register */
-+		| (ULPI_SET(ULPI_FUNC_CTRL) << EHCI_INSNREG05_ULPI_REGADD_SHIFT)
-+		/* Write */
-+		| (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT)
-+		/* PORTn */
-+		| ((port + 1) << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT)
-+		/* start ULPI access*/
-+		| (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT);
-+
-+	base = get_timer(0);
-+
-+	writel(reg, EHCI_BASE + EHCI_INSNREG05_ULPI);
-+
-+	/* Wait for ULPI access completion */
-+	while ((readl(EHCI_BASE + EHCI_INSNREG05_ULPI)
-+		& (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT)))
-+		if (get_timer(base) > CONFIG_SYS_HZ) {
-+			printf("OMAP4 EHCI error: timeout resetting phy\n");
-+			return -1;
-+		}
-+
-+	hccr = (struct ehci_hccr *)(EHCI_BASE);
-+	hcor = (struct ehci_hcor *)((uint32_t) hccr
-+			+ HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
-+	return 0;
-+}
-+
-+int omap4_ehci_hcd_stop(void)
-+{
-+	unsigned base = get_timer(0);
-+
-+	writel(OMAP4_UHH_SYSCONFIG_SOFTRESET, UHH_BASE + OMAP_UHH_SYSCONFIG);
-+
-+#if 0
-+	/* We get timeout here */
-+	while (!(readl(UHH_BASE + OMAP_UHH_SYSSTATUS) & (1 << 0)))
-+		if (get_timer(base) > CONFIG_SYS_HZ) {
-+			printf("OMAP4 EHCI error: reset UHH 0 timeout\n");
-+			return -ETIMEDOUT;
-+		}
-+
-+	while (!(readl(UHH_BASE + OMAP_UHH_SYSSTATUS) & (1 << 1)))
-+		if (get_timer(base) > CONFIG_SYS_HZ) {
-+			printf("OMAP4 EHCI error: reset UHH 1 timeout\n");
-+			return -ETIMEDOUT;
-+		}
-+
-+	while (!(readl(UHH_BASE + OMAP_UHH_SYSSTATUS) & (1 << 2)))
-+		if (get_timer(base) > CONFIG_SYS_HZ) {
-+			printf("OMAP4 EHCI error: reset UHH 2 timeout\n");
-+			return -ETIMEDOUT;
-+		}
-+#endif
-+
-+
-+	writel((1 << 1), TLL_BASE + OMAP_USBTLL_SYSCONFIG);
-+
-+	while (!(readl(TLL_BASE + OMAP_USBTLL_SYSSTATUS) & (1 << 0)))
-+		if (get_timer(base) > CONFIG_SYS_HZ) {
-+			printf("OMAP4 EHCI error: reset TLL timeout\n");
-+			return -ETIMEDOUT;
-+		}
-+
-+	/* Disable clocks */
-+	sr32((void *)0x4a0093e0, 0, 32, 0);
-+	sr32((void *)0x4a009368, 0, 32, 0);
-+	sr32((void *)0x4a0093d0, 0, 32, 0);
-+	sr32((void *)0x4A009358, 0, 32, 0);
-+
-+	return 0;
-+}
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0033-omap4_panda-add-support-for-EHCI.patch

@@ -1,97 +0,0 @@
-From 0d730b18792cdbd31ec47bd7b5793b26f884c796 Mon Sep 17 00:00:00 2001
-From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
-Date: Mon, 9 May 2011 23:04:51 +0200
-Subject: [PATCH 33/35] omap4_panda: add support for EHCI
-
-Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
-Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- board/ti/panda/Makefile     |    4 ++-
- board/ti/panda/ehci-panda.c |   59 +++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 62 insertions(+), 1 deletions(-)
- create mode 100644 board/ti/panda/ehci-panda.c
-
-diff --git a/board/ti/panda/Makefile b/board/ti/panda/Makefile
-index 2186403..253567c 100644
---- a/board/ti/panda/Makefile
-+++ b/board/ti/panda/Makefile
-@@ -25,7 +25,9 @@ include $(TOPDIR)/config.mk
- 
- LIB	= $(obj)lib$(BOARD).o
- 
--COBJS	:= panda.o
-+COBJS-$(CONFIG_USB_EHCI) += ehci-panda.o
-+
-+COBJS	:= $(COBJS-y) panda.o
- 
- SRCS	:= $(COBJS:.o=.c)
- OBJS	:= $(addprefix $(obj),$(COBJS))
-diff --git a/board/ti/panda/ehci-panda.c b/board/ti/panda/ehci-panda.c
-new file mode 100644
-index 0000000..b1e247c
---- /dev/null
-+++ b/board/ti/panda/ehci-panda.c
-@@ -0,0 +1,59 @@
-+/*
-+ * OMAP4 EHCI port, copied from linux/drivers/usb/host/ehci-omap.c
-+ *
-+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
-+ *	Author: Vikram Pandita <vikram.pandita@ti.com>
-+ *	Author: Anand Gadiyar <gadiyar@ti.com>
-+ */
-+
-+#include <asm/arch/gpio.h>
-+#include <asm/arch/ehci.h>
-+
-+#define GPIO_HUB_POWER		1
-+#define GPIO_HUB_NRESET		62
-+
-+int ehci_hcd_init(void)
-+{
-+	unsigned long base = get_timer(0);
-+	unsigned reg = 0, port = 0;
-+	int rc;
-+
-+	/* disable the power to the usb hub prior to init */
-+	rc = omap_request_gpio(GPIO_HUB_POWER);
-+	if (rc < 0) {
-+		printf("Could not request gpio %d\n", GPIO_HUB_POWER);
-+		return rc;
-+	}
-+
-+	rc = omap_request_gpio(GPIO_HUB_NRESET);
-+	if (rc < 0) {
-+		printf("Could not request gpio %d\n", GPIO_HUB_NRESET);
-+		omap_free_gpio(GPIO_HUB_POWER);
-+		return rc;
-+	}
-+
-+	omap_set_gpio_direction(GPIO_HUB_POWER, 0);
-+	omap_set_gpio_dataout(GPIO_HUB_POWER, 0);
-+	omap_set_gpio_direction(GPIO_HUB_NRESET, 0);
-+	omap_set_gpio_dataout(GPIO_HUB_NRESET, 0);
-+	omap_set_gpio_dataout(GPIO_HUB_NRESET, 1);
-+
-+	rc = omap4_ehci_hcd_init();
-+
-+	if (rc < 0)
-+		return rc;
-+
-+	omap_set_gpio_dataout(GPIO_HUB_POWER, 1);
-+
-+	return 0;
-+}
-+
-+int ehci_hcd_stop(void)
-+{
-+	omap4_ehci_hcd_stop();
-+
-+	omap_set_gpio_dataout(GPIO_HUB_POWER, 0);
-+	omap_set_gpio_dataout(GPIO_HUB_NRESET, 0);
-+	omap_free_gpio(GPIO_HUB_POWER);
-+	omap_free_gpio(GPIO_HUB_NRESET);
-+}
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0034-omap4_panda-adding-support-for-smsc-and-tftp-boot.patch

@@ -1,66 +0,0 @@
-From 1005120d214c98fde62dba9365e24519de001f50 Mon Sep 17 00:00:00 2001
-From: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com>
-Date: Thu, 19 May 2011 10:17:15 -0300
-Subject: [PATCH 34/35] omap4_panda: adding support for smsc and tftp boot
-
-Signed-off-by: Ricardo Salveti de Araujo <ricardo.salveti@canonical.com>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/omap4_panda.h |   20 +++++++++++++++++++-
- 1 files changed, 19 insertions(+), 1 deletions(-)
-
-diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
-index b4e7f41..0fcdf46 100644
---- a/include/configs/omap4_panda.h
-+++ b/include/configs/omap4_panda.h
-@@ -120,6 +120,19 @@
- #define CONFIG_USB_DEVICE		1
- #define CONFIG_USB_TTY			1
- #define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
-+#define CONFIG_CMD_USB			1
-+#define CONFIG_USB_STORAGE		1
-+#define CONFIG_USB_HOST_ETHER		1
-+#define CONFIG_USB_EHCI			1
-+#define CONFIG_USB_EHCI_OMAP4		1
-+#define CONFIG_USB_HOST			1
-+#define CONFIG_USB_ETHER_SMSC95XX	1
-+
-+/* Ethernet */
-+#define CONFIG_NET_MULTI		1
-+#define CONFIG_CMD_PING			1
-+#define CONFIG_CMD_DHCP			1
-+#define CONFIG_BOOTFILE			"uImage"
- 
- /* Flash */
- #define CONFIG_SYS_NO_FLASH	1
-@@ -134,7 +147,6 @@
- #define CONFIG_CMD_MMC		/* MMC support                  */
- 
- /* Disabled commands */
--#undef CONFIG_CMD_NET
- #undef CONFIG_CMD_NFS
- #undef CONFIG_CMD_FPGA		/* FPGA configuration Support   */
- #undef CONFIG_CMD_IMLS		/* List all found images        */
-@@ -152,6 +164,8 @@
- 	"console=ttyS2,115200n8\0" \
- 	"usbtty=cdc_acm\0" \
- 	"vram=16M\0" \
-+	"usbethaddr=00:02:03:04:05:06\0" \
-+	"hostname=panda\0" \
- 	"mmcdev=0\0" \
- 	"mmcroot=/dev/mmcblk0p2 rw\0" \
- 	"mmcrootfstype=ext3 rootwait\0" \
-@@ -176,6 +190,10 @@
- 				"run mmcboot; " \
- 			"fi; " \
- 		"fi; " \
-+	"fi; " \
-+	"if usb start; then " \
-+		"bootp; "\
-+		"source ${loadaddr};" \
- 	"fi"
- 
- #define CONFIG_AUTO_COMPLETE		1
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.06/0035-omap4_panda-use-uImage.panda-for-tftp.patch

@@ -1,26 +0,0 @@
-From b2ed58548de12a9bd9b23f51ade86793ae44b74f Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Mon, 11 Jul 2011 09:47:17 +0200
-Subject: [PATCH 35/35] omap4_panda: use uImage.panda for tftp
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- include/configs/omap4_panda.h |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
-index 0fcdf46..454a6b0 100644
---- a/include/configs/omap4_panda.h
-+++ b/include/configs/omap4_panda.h
-@@ -132,7 +132,7 @@
- #define CONFIG_NET_MULTI		1
- #define CONFIG_CMD_PING			1
- #define CONFIG_CMD_DHCP			1
--#define CONFIG_BOOTFILE			"uImage"
-+#define CONFIG_BOOTFILE			"uImage.panda"
- 
- /* Flash */
- #define CONFIG_SYS_NO_FLASH	1
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/omap3-touchbook/fw_env.config

@@ -1,6 +0,0 @@
-# Configuration file for fw_(printenv/saveenv) utility.
-# Up to two entries are valid, in this case the redundand
-# environment sector is assumed present.
-
-# MTD device name	Device offset	Env. size	Flash sector size
-/dev/mtd2		0x0000		0x20000		0x20000

recipes-bsp/u-boot/u-boot/touchbook-config.patch

@@ -1,25 +0,0 @@
-From eb13d25ad907314a5dd712ad7de59ca260968e61 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Sat, 8 Jan 2011 19:17:24 +0100
-Subject: [PATCH 10/10] touchbook-config.patch
-
----
- board/omap3/beagle/beagle.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/board/omap3/beagle/beagle.c b/board/omap3/beagle/beagle.c
-index d5ec63e..cc6e20d 100644
---- a/board/omap3/beagle/beagle.c
-+++ b/board/omap3/beagle/beagle.c
-@@ -186,7 +186,7 @@ int board_init(void)
- 
- 	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
- 	/* board id for Linux */
--	gd->bd->bi_arch_number = MACH_TYPE_OMAP3_BEAGLE;
-+	gd->bd->bi_arch_number = 2393;
- 	/* boot param addr */
- 	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
- 
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot_2010.06-psp.bb

@@ -1,17 +0,0 @@
-require u-boot.inc
-
-FILESPATHPKG =. "u-boot-psp-git:"
-
-COMPATIBLE_MACHINE = "am387x-evm|am389x-evm|c6a814x-evm|c6a816x-evm|dm814x-evm"
-
-SRC_URI = "git://arago-project.org/git/projects/u-boot-omap3.git;branch=${BRANCH};protocol=git"
-
-BRANCH_ti814x = "ti81xx-master"
-SRCREV_pn-${PN}_ti814x = "5fcf46a405fe8e8a59a04d3cebdafd39ac0c4bd0"
-LIC_FILES_CHKSUM_pn-${PN}_ti814x = "file://COPYING;md5=4c6cde5df68eff615d36789dc18edd3b"
-
-BRANCH_ti816x = "ti81xx-master"
-SRCREV_pn-${PN}_ti816x = "5fcf46a405fe8e8a59a04d3cebdafd39ac0c4bd0"
-LIC_FILES_CHKSUM_pn-${PN}_ti816x = "file://COPYING;md5=4c6cde5df68eff615d36789dc18edd3b"
-
-S = "${WORKDIR}/git"

recipes-bsp/u-boot/u-boot_2011.06.bb

@@ -1,51 +0,0 @@
-require u-boot.inc
-
-# No patches for other machines yet
-COMPATIBLE_MACHINE = "(beagleboard)"
-
-SRC_URI = "git://www.denx.de/git/u-boot.git;protocol=git \
-           file://2011.06/0001-OMAP3-Beagle-Pin-Mux-initialization-glitch-fix.patch \
-           file://2011.06/0002-OMAP-Remove-omapfb.debug-y-from-Beagle-and-Overo-env.patch \
-           file://2011.06/0003-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch \
-           file://2011.06/0004-beagleboard-add-support-for-xM-revision-C.patch \
-           file://2011.06/0005-Add-support-for-SMSC95XX-USB-2.0-10-100MBit-Ethernet.patch \
-           file://2011.06/0006-Add-Ethernet-hardware-MAC-address-framework-to-usbne.patch \
-           file://2011.06/0007-Add-documentation-for-USB-Host-Networking.patch \
-           file://2011.06/0008-dm3730-enable-dpll5.patch \
-           file://2011.06/0009-beagleboard-enable-HUB-power-on-XM-boards.patch \
-           file://2011.06/0010-beagleboard-turn-off-clocks-in-ehci_stop.patch \
-           file://2011.06/0011-beagleboard-enable-networking.patch \
-           file://2011.06/0012-beagleboard-switch-to-ttyO2-as-console.patch \
-           file://2011.06/0013-beagleboard-load-kernel-from-MMC-ext-not-FAT.patch \
-           file://2011.06/0014-beagleboard-enable-asix-driver-and-dhcp.patch \
-           file://2011.06/0015-beagleboard-hardcode-MAC-for-onboard-SMSC-and-use-uI.patch \
-           file://2011.06/0016-beagleboard-decrease-bootdelay-to-2-seconds.patch \
-           file://2011.06/0017-USB-Remove-__attribute__-packed-for-struct-ehci_hccr.patch \
-           file://2011.06/0018-usb-Some-EHCI-chipsets-are-slow-to-respond.patch \
-           file://2011.06/0019-OMAP3-Add-DSS-driver-for-OMAP3.patch \
-           file://2011.06/0020-video-DSS-makefile-update.patch \
-           file://2011.06/0021-BeagleBoard-Configure-DVI-S-video.patch \
-           file://2011.06/0022-BeagleBoard-config-enable-DSS.patch \
-           file://2011.06/0023-BeagleBoard-Added-userbutton-command.patch \
-           file://2011.06/0024-Corrected-LED-name-match-finding-avoiding-extraneous.patch \
-           file://2011.06/0025-BeagleBoard-fix-LED-0-1-in-driver.patch \
-           file://2011.06/0026-led-added-cmd_led-to-Makefile.patch \
-           file://2011.06/0027-led-correct-off-on-locations-in-structure.patch \
-           file://2011.06/0028-BeagleBoard-config-make-mtest-run.patch \
-           file://2011.06/0029-BeagleBoard-config-increase-command-line-functionali.patch \
-           file://2011.06/0030-BeagleBoard-config-add-optargs-buddy-camera.patch \
-           file://2011.06/0031-omap4-add-support-for-gpios.patch \
-           file://2011.06/0032-omap4-add-support-for-EHCI.patch \
-           file://2011.06/0033-omap4_panda-add-support-for-EHCI.patch \
-           file://2011.06/0034-omap4_panda-adding-support-for-smsc-and-tftp-boot.patch \
-           file://2011.06/0035-omap4_panda-use-uImage.panda-for-tftp.patch \
-           file://fw_env.config \
-          "
-# v2011.06 tag -> b1af6f532e0d348b153d5c148369229d24af361a
-SRCREV = "b1af6f532e0d348b153d5c148369229d24af361a"
-PV = "2011.06"
-PR = "r1"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb"
-
-S = "${WORKDIR}/git"

recipes-bsp/u-boot/u-boot_2011.09-psp04.06.00.08.bb

@@ -1,29 +0,0 @@
-# Use the version of u-boot.inc in oe-core not the meta-ti version
-require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot.inc
-
-DESCRIPTION = "u-boot bootloader for ARM MPU devices"
-LICENSE = "GPLv2+"
-LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb"
-
-COMPATIBLE_MACHINE = "ti33x|omap3"
-
-DEFAULT_PREFERENCE = "-1"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-PR = "r0+gitr${SRCPV}"
-
-SRC_URI = "git://arago-project.org/git/projects/u-boot-am33x.git;protocol=git;branch=${BRANCH}"
-
-BRANCH = "AM335XPSP_04.06.00.08"
-
-# Lock to the commit corresponding to TAG:
-# v2011.09_AM335xPSP_04.06.00.08
-SRCREV = "1e4626f0d5f3bb04ec974e76a5d9029875269d31"
-
-S = "${WORKDIR}/git"
-
-UBOOT_SUFFIX = "img"
-
-# Set the name of the SPL that will built so that it is also packaged with u-boot.
-SPL_BINARY = "MLO"

recipes-bsp/u-boot/u-boot_2011.12.bb

@@ -1,15 +1,10 @@
-require u-boot.inc
+require u-boot-ti.inc
 
-# SPL build
-UBOOT_BINARY = "u-boot.img"
-UBOOT_IMAGE = "u-boot-${MACHINE}-${PV}-${PR}.img"
-UBOOT_SYMLINK = "u-boot-${MACHINE}.img"
+SPL_BINARY = "MLO"
 
-PV = "2011.12"
 PR = "r8"
 
-# No patches for other machines yet
-COMPATIBLE_MACHINE = "(beagleboard|pandaboard|hawkboard|am3517-evm|am37x-evm|omap3evm)"
+COMPATIBLE_MACHINE = "(beagleboard|pandaboard|am3517-evm|am37x-evm|omap3evm)"
 
 # Non-omap4 platforms need outer cache turned on
 CACHEFIX = "file://2011.12/0008-Revert-armv7-disable-L2-cache-in-cleanup_before_linu.patch"
@@ -19,7 +14,7 @@ CACHEFIX_omap4 = ""
 FWENV_beagleboard = "file://fw_env.config"
 FWENV = ""
 
-SRC_URI = "git://www.denx.de/git/u-boot.git;protocol=git \
+SRC_URI = "git://git.denx.de/u-boot.git;protocol=git \
            file://2011.12/0001-beagleboard-mount-rootfs-RO-instead-of-RW-at-boot.patch \
            file://2011.12/0002-beagleboard-add-support-for-TCT-Beacon-board.patch \
            file://2011.12/0003-beagleboard-add-support-for-scanning-loop-through-ex.patch \
@@ -36,12 +31,7 @@ SRC_URI = "git://www.denx.de/git/u-boot.git;protocol=git \
            ${FWENV} \
           "
 
-
 # v2011.12 tag
 SRCREV = "cba9a894fdb1cb49b60fcd1d1d6919cbd7995dd5"
 
-LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb"
-
-S = "${WORKDIR}/git"
-
 RRECOMMENDS_${PN}_beagleboard = "u-boot-fw-utils"

recipes-bsp/u-boot/u-boot_2012.07.bb

@@ -1,23 +0,0 @@
-require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot.inc
-
-DESCRIPTION = "u-boot bootloader for Multi-Core BU devices"
-LICENSE = "GPLv2+"
-LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb"
-
-COMPATIBLE_MACHINE = "keystone"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-PR = "r0+gitr${SRCPV}"
-
-SRC_URI = "git://gtgit01.gt.design.ti.com/git/projects/u-boot-keystone.git;protocol=git;branch=${BRANCH}"
-
-BRANCH = "master"
-
-SRCREV = "6e710c61dba2665e01c900470a0a63743ff431c6"
-
-EXTRA_OEMAKE = 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}"'
-
-S = "${WORKDIR}/git"
-
-UBOOT_SUFFIX = "bin"