ti-sgx-ddk-um: fixup packageconfig params

Fix the package config params to make it obvious what combinations are
allowed. Also, rework the way we are inheriting init related classes so
that we don't accidentally do any additional postinstall steps. While
we're at it, don't execute anything for the compile or configure stage.

Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>

meta-ti-bsp/README

@@ -8,11 +8,11 @@ This layer depends on:
 
 URI: git://git.openembedded.org/openembedded-core
 layers: meta
-branch: master
+branch: kirkstone
 
 URI: git://git.yoctoproject.org/meta-arm
 layers: meta-arm
-branch: master
+branch: kirkstone
 
 
 The base BSP part of meta-ti should work with different OpenEmbedded/Yocto

meta-ti-bsp/SECURITY

@@ -0,0 +1,20 @@
+How to Report a Potential Vulnerability?
+========================================
+
+If you would like to report a public issue (for example, one with a released
+CVE number), please report it to the mailing list:
+
+  https://lists.yoctoproject.org/g/meta-ti
+
+If you are dealing with a not-yet released or urgent issue, please send a
+message to one of the maintainers listed in the README.  Include as many
+details as possible:
+  - the layer or software module affected
+  - the recipe and its version
+  - any example code, if available
+
+Branches maintained with security fixes
+---------------------------------------
+
+See https://wiki.yoctoproject.org/wiki/Releases for the list of current
+releases.  We only accept patches for the LTS releases and the master branch.

meta-ti-bsp/classes/kernel-fitimage-ti-u-boot.bbclass

@@ -1,214 +0,0 @@
-
-inherit ti-secdev
-
-# The TI u-boot requires that the kernel image is signed.  To not overload the
-# entire kernel-fitimage.bbclass from oe-core, we just overwrite one function
-# and do the signing in there.
-
-#
-# Assemble fitImage
-#
-# $1 ... .its filename
-# $2 ... fitImage name
-# $3 ... include ramdisk
-fitimage_assemble() {
-	kernelcount=1
-	dtbcount=""
-	DTBS=""
-	ramdiskcount=$3
-	setupcount=""
-	bootscr_id=""
-	rm -f $1 arch/${ARCH}/boot/$2
-
-	if [ -n "${UBOOT_SIGN_IMG_KEYNAME}" -a "${UBOOT_SIGN_KEYNAME}" = "${UBOOT_SIGN_IMG_KEYNAME}" ]; then
-		bbfatal "Keys used to sign images and configuration nodes must be different."
-	fi
-
-	fitimage_emit_fit_header $1
-
-	#
-	# Step 1: Prepare a kernel image section.
-	#
-	fitimage_emit_section_maint $1 imagestart
-
-	uboot_prep_kimage
-	fitimage_ti_secure linux.bin linux.bin.sec
-	fitimage_emit_section_kernel $1 $kernelcount linux.bin.sec "$linux_comp"
-
-	#
-	# Step 2: Prepare a DTB image section
-	#
-
-	if [ -n "${KERNEL_DEVICETREE}" ]; then
-		dtbcount=1
-		for DTB in ${KERNEL_DEVICETREE}; do
-			if echo $DTB | grep -q '/dts/'; then
-				bbwarn "$DTB contains the full path to the the dts file, but only the dtb name should be used."
-				DTB=`basename $DTB | sed 's,\.dts$,.dtb,g'`
-			fi
-
-			# Skip ${DTB} if it's also provided in ${EXTERNAL_KERNEL_DEVICETREE}
-			if [ -n "${EXTERNAL_KERNEL_DEVICETREE}" ] && [ -s ${EXTERNAL_KERNEL_DEVICETREE}/${DTB} ]; then
-				continue
-			fi
-
-			DTB_PATH="arch/${ARCH}/boot/dts/$DTB"
-			if [ ! -e "$DTB_PATH" ]; then
-				DTB_PATH="arch/${ARCH}/boot/$DTB"
-			fi
-
-			DTB=$(echo "$DTB" | tr '/' '_')
-
-			# Skip DTB if we've picked it up previously
-			echo "$DTBS" | tr ' ' '\n' | grep -xq "$DTB" && continue
-
-			fitimage_ti_secure ${DTB_PATH} ${DTB_PATH}.sec
-
-            DTBS="$DTBS $DTB"
-			fitimage_emit_section_dtb $1 $DTB ${DTB_PATH}.sec
-		done
-	fi
-
-	if [ -n "${EXTERNAL_KERNEL_DEVICETREE}" ]; then
-		dtbcount=1
-		for DTB in $(find "${EXTERNAL_KERNEL_DEVICETREE}" -name '*.dtb' -printf '%P\n' | sort) \
-		$(find "${EXTERNAL_KERNEL_DEVICETREE}" -name '*.dtbo' -printf '%P\n' | sort); do
-			DTB=$(echo "$DTB" | tr '/' '_')
-
-			# Skip DTB/DTBO if we've picked it up previously
-			echo "$DTBS" | tr ' ' '\n' | grep -xq "$DTB" && continue
-
-			fitimage_ti_secure ${EXTERNAL_KERNEL_DEVICETREE}/${DTB} ${EXTERNAL_KERNEL_DEVICETREE}/${DTB}.sec
-
-			DTBS="$DTBS $DTB"
-			fitimage_emit_section_dtb $1 $DTB "${EXTERNAL_KERNEL_DEVICETREE}/${DTB}.sec"
-		done
-	fi
-
-	#
-	# Step 3: Prepare a u-boot script section
-	#
-
-	if [ -n "${UBOOT_ENV}" ] && [ -d "${STAGING_DIR_HOST}/boot" ]; then
-		if [ -e "${STAGING_DIR_HOST}/boot/${UBOOT_ENV_BINARY}" ]; then
-			cp ${STAGING_DIR_HOST}/boot/${UBOOT_ENV_BINARY} ${B}
-			bootscr_id="${UBOOT_ENV_BINARY}"
-			fitimage_emit_section_boot_script $1 "$bootscr_id" ${UBOOT_ENV_BINARY}
-		else
-			bbwarn "${STAGING_DIR_HOST}/boot/${UBOOT_ENV_BINARY} not found."
-		fi
-	fi
-
-	#
-	# Step 4: Prepare a setup section. (For x86)
-	#
-	if [ -e arch/${ARCH}/boot/setup.bin ]; then
-		setupcount=1
-		fitimage_emit_section_setup $1 $setupcount arch/${ARCH}/boot/setup.bin
-	fi
-
-	#
-	# Step 5: Prepare a ramdisk section.
-	#
-	if [ "x${ramdiskcount}" = "x1" ] && [ "${INITRAMFS_IMAGE_BUNDLE}" != "1" ]; then
-		# Find and use the first initramfs image archive type we find
-		found=
-		for img in ${FIT_SUPPORTED_INITRAMFS_FSTYPES}; do
-			initramfs_path="${DEPLOY_DIR_IMAGE}/${INITRAMFS_IMAGE_NAME}.$img"
-			initramfs_local="usr/${INITRAMFS_IMAGE_NAME}.$img"
-			if [ -e "$initramfs_path" ]; then
-				bbnote "Found initramfs image: $initramfs_path"
-				found=true
-				fitimage_ti_secure ${initramfs_path} ${initramfs_local}.sec
-
-				fitimage_emit_section_ramdisk $1 "$ramdiskcount" "${initramfs_local}.sec"
-				break
-			else
-				bbnote "Did not find initramfs image: $initramfs_path"
-			fi
-		done
-
-		if [ -z "$found" ]; then
-			bbfatal "Could not find a valid initramfs type for ${INITRAMFS_IMAGE_NAME}, the supported types are: ${FIT_SUPPORTED_INITRAMFS_FSTYPES}"
-		fi
-	fi
-
-	fitimage_emit_section_maint $1 sectend
-
-	# Force the first Kernel and DTB in the default config
-	kernelcount=1
-	if [ -n "$dtbcount" ]; then
-		dtbcount=1
-	fi
-
-	#
-	# Step 6: Prepare a configurations section
-	#
-	fitimage_emit_section_maint $1 confstart
-
-	# kernel-fitimage.bbclass currently only supports a single kernel (no less or
-	# more) to be added to the FIT image along with 0 or more device trees and
-	# 0 or 1 ramdisk.
-        # It is also possible to include an initramfs bundle (kernel and rootfs in one binary)
-        # When the initramfs bundle is used ramdisk is disabled.
-	# If a device tree is to be part of the FIT image, then select
-	# the default configuration to be used is based on the dtbcount. If there is
-	# no dtb present than select the default configuation to be based on
-	# the kernelcount.
-	if [ -n "$DTBS" ]; then
-		i=1
-		for DTB in ${DTBS}; do
-			dtb_ext=${DTB##*.}
-			if [ "$dtb_ext" = "dtbo" ]; then
-				fitimage_emit_section_config $1 "" "$DTB" "" "$bootscr_id" "" "`expr $i = $dtbcount`"
-			else
-				fitimage_emit_section_config $1 $kernelcount "$DTB" "$ramdiskcount" "$bootscr_id" "$setupcount" "`expr $i = $dtbcount`"
-			fi
-			i=`expr $i + 1`
-		done
-	else
-		defaultconfigcount=1
-		fitimage_emit_section_config $1 $kernelcount "" "$ramdiskcount" "$bootscr_id"  "$setupcount" $defaultconfigcount
-	fi
-
-	fitimage_emit_section_maint $1 sectend
-
-	fitimage_emit_section_maint $1 fitend
-
-	#
-	# Step 7: Assemble the image
-	#
-	${UBOOT_MKIMAGE} \
-		${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \
-		-f $1 \
-		arch/${ARCH}/boot/$2
-
-	#
-	# Step 8: Sign the image and add public key to U-Boot dtb
-	#
-	if [ "x${UBOOT_SIGN_ENABLE}" = "x1" ] ; then
-		add_key_to_u_boot=""
-		if [ -n "${UBOOT_DTB_BINARY}" ]; then
-			# The u-boot.dtb is a symlink to UBOOT_DTB_IMAGE, so we need copy
-			# both of them, and don't dereference the symlink.
-			cp -P ${STAGING_DATADIR}/u-boot*.dtb ${B}
-			add_key_to_u_boot="-K ${B}/${UBOOT_DTB_BINARY}"
-		fi
-		${UBOOT_MKIMAGE_SIGN} \
-			${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \
-			-F -k "${UBOOT_SIGN_KEYDIR}" \
-			$add_key_to_u_boot \
-			-r arch/${ARCH}/boot/$2 \
-			${UBOOT_MKIMAGE_SIGN_ARGS}
-	fi
-}
-
-fitimage_ti_secure() {
-	if test -n "${TI_SECURE_DEV_PKG}"; then
-		export TI_SECURE_DEV_PKG=${TI_SECURE_DEV_PKG}
-		${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh $1 $2
-	else
-		cp $1 $2
-	fi
-}
-

meta-ti-bsp/conf/machine/am57xx-evm.conf

@@ -10,6 +10,7 @@ SERIAL_CONSOLES = "115200;ttyS2"
 
 KERNEL_DEVICETREE_PREFIX = " \
     am57 \
+    ov10635 \
     ti/am57 \
     ti/lcd \
     ti/ov10635 \

meta-ti-bsp/conf/machine/am62axx-evm.conf

@@ -6,9 +6,9 @@ require conf/machine/include/am62axx.inc
 
 KERNEL_DEVICETREE_PREFIX = " \
     ti/k3-am62a7 \
-    ti/k3-am62x-sk-csi2 \
-    ti/k3-am62x-sk-hdmi \
+    ti/k3-am62x-sk \
     ti/k3-fpdlink \
+    ti/k3-v3link \
 "
 
 KERNEL_DEVICETREE = " \

meta-ti-bsp/conf/machine/am62pxx-evm-k3r5.conf

@@ -3,6 +3,7 @@
 #@DESCRIPTION: Machine configuration for the TI AM62Px EVM (R5F core)
 
 require conf/machine/include/k3r5.inc
+require conf/machine/include/ti-extras.inc
 
 SYSFW_SOC = "am62px"
 SYSFW_CONFIG = "evm"

meta-ti-bsp/conf/machine/am62pxx-evm.conf

@@ -3,11 +3,13 @@
 #@DESCRIPTION: Machine configuration for the TI AM62PX EVM
 
 require conf/machine/include/am62pxx.inc
+require conf/machine/include/ti-extras.inc
 
 KERNEL_DEVICETREE_PREFIX = " \
     ti/k3-am62p5 \
     ti/k3-am62x-sk-csi2 \
     ti/k3-am62x-sk-hdmi \
+    ti/k3-am62x-sk-lpm \
 "
 
 KERNEL_DEVICETREE = " \
@@ -15,3 +17,10 @@ KERNEL_DEVICETREE = " \
 "
 
 UBOOT_MACHINE = "am62px_evm_a53_defconfig"
+
+# UBOOT_CONFIG_FRAGMENTS holds the list of u-boot config fragments which has to be build
+# along with the base defconfig mentioned in UBOOT_MACHINE. Refer u-boot-mergeconfig.inc
+# under meta-ti-bsp/recipes-bsp/u-boot/ for more details.
+# For AM62P tisdk-display-cluster image, splash screen is handled by SBL.
+# Hence, disable the A53 based splash screen using the am62px_evm_prune_splashscreen.config fragment present in ti-u-boot tree
+UBOOT_CONFIG_FRAGMENTS = "${@oe.utils.conditional('DISPLAY_CLUSTER_ENABLE', '1', 'am62px_evm_prune_splashscreen.config', '', d)}"

meta-ti-bsp/conf/machine/am62xx-evm.conf

@@ -7,8 +7,7 @@ require conf/machine/include/ti-extras.inc
 
 KERNEL_DEVICETREE_PREFIX = " \
     ti/k3-am625 \
-    ti/k3-am62x-sk-csi2 \
-    ti/k3-am62x-sk-hdmi \
+    ti/k3-am62x-sk \
 "
 
 KERNEL_DEVICETREE = " \

meta-ti-bsp/conf/machine/am62xx-lp-evm-k3r5.conf

@@ -3,6 +3,7 @@
 #@DESCRIPTION: Machine configuration for the TI AM62xx LP GP EVM (R5F core)
 
 require conf/machine/include/k3r5.inc
+require conf/machine/include/ti-extras.inc
 
 SYSFW_SOC = "am62x"
 SYSFW_CONFIG = "evm"

meta-ti-bsp/conf/machine/am62xx-lp-evm.conf

@@ -3,11 +3,14 @@
 #@DESCRIPTION: Machine configuration for the TI AM62XX LP EVM
 
 require conf/machine/include/am62xx.inc
+require conf/machine/include/ti-extras.inc
 
 KERNEL_DEVICETREE_PREFIX = " \
     ti/k3-am62-lp \
     ti/k3-am625-sk \
     ti/k3-am62x-sk-hdmi \
+    ti/k3-am62x-sk-lpm \
+    ti/k3-am62x-sk-mcan \
 "
 
 KERNEL_DEVICETREE = " \

meta-ti-bsp/conf/machine/am62xxsip-evm.conf

@@ -6,8 +6,7 @@ require conf/machine/include/am62xx.inc
 
 KERNEL_DEVICETREE_PREFIX = " \
     ti/k3-am625 \
-    ti/k3-am62x-sk-csi2 \
-    ti/k3-am62x-sk-hdmi \
+    ti/k3-am62x-sk \
 "
 
 KERNEL_DEVICETREE = " \

meta-ti-bsp/conf/machine/beagle-x15.conf

@@ -9,9 +9,11 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-bb.org"
 KERNEL_DEVICETREE_PREFIX = "am57xx-beagle-x15"
 
 KERNEL_DEVICETREE = " \
-    am57xx-beagle-x15.dtb \
-    am57xx-beagle-x15-revb1.dtb \
-    am57xx-beagle-x15-revc.dtb \
+am57xx-beagle-x15.dtb \
+am57xx-beagle-x15-revb1.dtb \
+am57xx-beagle-x15-revc.dtb \
+am57xx-idk-lcd-osd101t2045.dtbo \
+am57xx-idk-lcd-osd101t2587.dtbo \
 "
 
 MACHINE_GUI_CLASS = "bigscreen"

meta-ti-bsp/conf/machine/beaglebone-ai64-k3r5.conf

@@ -15,3 +15,9 @@ UBOOT_IMAGE = "tiboot3-${MAINMACHINE}-${PV}-${PR}.${UBOOT_SUFFIX}"
 UBOOT_SYMLINK = "tiboot3-${MAINMACHINE}.${UBOOT_SUFFIX}"
 
 UBOOT_MACHINE = "j721e_evm_r5_defconfig"
+
+
+# UBOOT_CONFIG_FRAGMENTS holds the list of u-boot config fragments which has to be build
+# along with the base defconfig mentioned in UBOOT_MACHINE. Refer u-boot-mergeconfig.inc
+# under meta-ti-bsp/recipes-bsp/u-boot/ for more details.
+UBOOT_CONFIG_FRAGMENTS = "j721e_beagleboneai64_r5.config"

meta-ti-bsp/conf/machine/beaglebone-ai64.conf

@@ -6,21 +6,30 @@ require conf/machine/include/j721e.inc
 
 UBOOT_MACHINE = "j721e_evm_a72_config"
 
+
+# UBOOT_CONFIG_FRAGMENTS holds the list of u-boot config fragments which has to be build
+# along with the base defconfig mentioned in UBOOT_MACHINE. Refer u-boot-mergeconfig.inc
+# under meta-ti-bsp/recipes-bsp/u-boot/ for more details.
+UBOOT_CONFIG_FRAGMENTS = "j721e_beagleboneai64_a72.config"
+
 PREFERRED_PROVIDER_virtual/kernel = "linux-bb.org"
 
 KERNEL_DEVICETREE = " \
 ti/k3-j721e-beagleboneai64.dtb \
 ti/k3-j721e-common-proc-board.dtb \
+ti/k3-j721e-beagleboneai64-dsi-rpi-7inch-panel.dtbo \
+ti/k3-j721e-common-proc-board-infotainment.dtbo \
 ti/k3-j721e-evm-csi2-ov5640.dtbo \
 ti/k3-j721e-evm-fusion.dtbo \
 ti/k3-j721e-evm-gesi-exp-board.dtbo \
+ti/k3-j721e-evm-pcie0-ep.dtbo \
 ti/k3-j721e-evm-quad-port-eth-exp.dtbo \
 ti/k3-j721e-evm-virt-mac-client.dtbo \
+ti/k3-j721e-sk.dtb \
 ti/k3-j721e-sk-csi2-ov5640.dtbo \
 ti/k3-j721e-sk-csi2-rpi-imx219.dtbo \
 ti/k3-j721e-sk-fusion.dtbo \
 ti/k3-j721e-sk-rpi-hdr-ehrpwm.dtbo \
-ti/k3-j721e-sk.dtb \
 "
 
 MACHINE_GUI_CLASS = "bigscreen"

meta-ti-bsp/conf/machine/beaglebone.conf

@@ -9,12 +9,57 @@ PREFERRED_PROVIDER_virtual/kernel = "linux-bb.org"
 KERNEL_DEVICETREE_PREFIX = "am335x-bone"
 
 KERNEL_DEVICETREE = " \
-    am335x-bone.dtb \
-    am335x-boneblue.dtb \
-    am335x-boneblack.dtb \
-    am335x-boneblack-wireless.dtb \
-    am335x-bonegreen.dtb \
-    am335x-bonegreen-wireless.dtb \
+am335x-bone.dtb \
+am335x-boneblack.dtb \
+am335x-boneblack-pps.dtb \
+am335x-boneblack-uboot.dtb \
+am335x-boneblack-uboot-univ.dtb \
+am335x-boneblack-wireless.dtb \
+am335x-boneblue.dtb \
+am335x-bonegreen.dtb \
+am335x-bonegreen-gateway.dtb \
+am335x-bonegreen-wireless.dtb \
+am335x-bonegreen-wireless-uboot-univ.dtb \
+am335x-pocketbeagle.dtb \
+am335x-sancloud-bbe.dtb \
+am335x-sancloud-bbe-extended-wifi.dtb \
+am335x-sancloud-bbe-lite.dtb \
+"
+
+# Extra DT overlays/capes
+KERNEL_DEVICETREE += " \
+AM335X-PRU-UIO-00A0.dtbo \
+BB-ADC-00A0.dtbo \
+BB-BBBW-WL1835-00A0.dtbo \
+BB-BBGG-WL1835-00A0.dtbo \
+BB-BBGW-WL1835-00A0.dtbo \
+BB-BONE-4D5R-01-00A1.dtbo \
+BB-BONE-eMMC1-01-00A0.dtbo \
+BB-BONE-LCD4-01-00A1.dtbo \
+BB-BONE-NH7C-01-A0.dtbo \
+BB-CAPE-DISP-CT4-00A0.dtbo \
+BB-HDMI-TDA998x-00A0.dtbo \
+BB-I2C1-MCP7940X-00A0.dtbo \
+BB-I2C1-RTC-DS3231.dtbo \
+BB-I2C1-RTC-PCF8563.dtbo \
+BB-I2C2-BME680.dtbo \
+BB-I2C2-MPU6050.dtbo \
+BB-LCD-ADAFRUIT-24-SPI1-00A0.dtbo \
+BB-NHDMI-TDA998x-00A0.dtbo \
+BBORG_COMMS-00A2.dtbo \
+BBORG_FAN-A000.dtbo \
+BBORG_RELAY-00A2.dtbo \
+BB-SPIDEV0-00A0.dtbo \
+BB-SPIDEV1-00A0.dtbo \
+BB-UART1-00A0.dtbo \
+BB-UART2-00A0.dtbo \
+BB-UART4-00A0.dtbo \
+BB-W1-P9.12-00A0.dtbo \
+BONE-ADC.dtbo \
+M-BB-BBG-00A0.dtbo \
+M-BB-BBGG-00A0.dtbo \
+PB-MIKROBUS-0.dtbo \
+PB-MIKROBUS-1.dtbo \
 "
 
 MACHINE_GUI_CLASS = "bigscreen"

meta-ti-bsp/conf/machine/beagleplay-k3r5.conf

@@ -12,3 +12,8 @@ SYSFW_CONFIG = "evm"
 SYSFW_SUFFIX = "gp"
 
 UBOOT_MACHINE = "am62x_evm_r5_defconfig"
+
+# UBOOT_CONFIG_FRAGMENTS holds the list of u-boot config fragments which has to be build
+# along with the base defconfig mentioned in UBOOT_MACHINE. Refer u-boot-mergeconfig.inc
+# under meta-ti-bsp/recipes-bsp/u-boot/ for more details.
+UBOOT_CONFIG_FRAGMENTS = "am625_beagleplay_r5.config"

meta-ti-bsp/conf/machine/beagleplay.conf

@@ -20,6 +20,11 @@ OPTEEMACHINE = "k3-am62x"
 
 UBOOT_MACHINE = "am62x_evm_a53_defconfig"
 
+# UBOOT_CONFIG_FRAGMENTS holds the list of u-boot config fragments which has to be build
+# along with the base defconfig mentioned in UBOOT_MACHINE. Refer u-boot-mergeconfig.inc
+# under meta-ti-bsp/recipes-bsp/u-boot/ for more details.
+UBOOT_CONFIG_FRAGMENTS = "am625_beagleplay_a53.config"
+
 PREFERRED_PROVIDER_virtual/kernel = "linux-bb.org"
 PREFERRED_PROVIDER_virtual/bootloader = "u-boot-bb.org"
 PREFERRED_PROVIDER_u-boot = "u-boot-bb.org"
@@ -28,17 +33,40 @@ KERNEL_DEVICETREE = " \
 ti/k3-am625-beagleplay.dtb \
 ti/k3-am625-beagleplay-csi2-ov5640.dtbo \
 ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtbo \
+ti/k3-am625-beagleplay-lincolntech-lcd185-panel.dtbo \
+ti/k3-am625-beaglemod.dtb \
+ti/k3-am625-beaglemod-audio.dtbo \
+ti/k3-am625-beaglemod-can0.dtbo \
+ti/k3-am625-beaglemod-can1.dtbo \
+ti/k3-am625-beaglemod-csi0-ov5640.dtbo \
+ti/k3-am625-beaglemod-eeprom.dtbo \
+ti/k3-am625-beaglemod-eth.dtbo \
+ti/k3-am625-beaglemod-hdmi.dtbo \
+ti/k3-am625-beaglemod-io-expand.dtbo \
+ti/k3-am625-beaglemod-lt-lcd185.dtbo \
+ti/k3-am625-beaglemod-ospi-flash.dtbo \
+ti/k3-am625-beaglemod-rs485-1.dtbo \
+ti/k3-am625-beaglemod-rs485-2.dtbo \
+ti/k3-am625-beaglemod-rtc.dtbo \
+ti/k3-am625-beaglemod-wl1835.dtbo \
 ti/k3-am625-sk.dtb \
-ti/k3-am625-sk-csi2-ov5640.dtbo \
-ti/k3-am625-sk-csi2-tevi-ov5640.dtbo \
 ti/k3-am625-sk-dmtimer-pwm.dtbo \
 ti/k3-am625-sk-ecap-capture.dtbo \
-ti/k3-am625-sk-hdmi-audio.dtbo \
-ti/k3-am625-sk-mcan.dtbo \
+ti/k3-am625-sk-lincolntech-lcd185-panel.dtbo \
 ti/k3-am625-sk-mcspi-loopback.dtbo \
-ti/k3-am625-sk-mcu-gpio-wakeup.dtbo \
 ti/k3-am625-sk-microtips-mf101hie-panel.dtbo \
-ti/k3-am625-sk-rpi-hdr-pwm.dtbo \
+ti/k3-am625-sk-microtips-mf103hie-lcd2.dtbo \
+ti/k3-am625-sk-pwm.dtbo \
+ti/k3-am625-sk-rpi-hdr-ehrpwm.dtbo \
+ti/k3-am62x-sk-csi2-imx219.dtbo \
+ti/k3-am62x-sk-csi2-ov5640.dtbo \
+ti/k3-am62x-sk-csi2-tevi-ov5640.dtbo \
+ti/k3-am62x-sk-csi2-v3link-fusion.dtbo \
+ti/k3-am62x-sk-eqep.dtbo \
+ti/k3-am62x-sk-hdmi-audio.dtbo \
+ti/k3-am62x-sk-hdmi-disable-fastboot.dtbo \
+ti/k3-am62x-sk-lpm-wkup-sources.dtbo \
+ti/k3-am62x-sk-mcan.dtbo \
 "
 
 MACHINE_GUI_CLASS = "bigscreen"

meta-ti-bsp/conf/machine/include/am62pxx.inc

@@ -17,3 +17,6 @@ OPTEEMACHINE = "k3-am62x"
 MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "cnm-wave-fw"
 
 SERIAL_CONSOLES = "115200;ttyS2"
+
+# Bitmap image tarball for early splashscreen
+IMAGE_BOOT_FILES += "ti_logo_414x97_32bpp.bmp.gz"

meta-ti-bsp/conf/machine/include/j7200.inc

@@ -1,6 +1,21 @@
 require conf/machine/include/k3.inc
 SOC_FAMILY:append = ":j7200"
 
+# Default tiboot3.bin on J7200 is for GP
+IMAGE_BOOT_FILES += "tiboot3-j7200-gp-evm.bin"
+
+# Since default tiboot3.bin on J7200 is for GP, add a version for SR1.0 HS-FS
+IMAGE_BOOT_FILES += "tiboot3-j7200-hs-fs-evm.bin"
+
+# Since default tiboot3.bin on J7200 is for GP, add a version for SR1.0 HS-SE
+IMAGE_BOOT_FILES += "tiboot3-j7200-hs-evm.bin"
+
+# Since default tiboot3.bin on J7200 is for GP, add a version for SR2.0 HS-FS
+IMAGE_BOOT_FILES += "tiboot3-j7200_sr2-hs-fs-evm.bin"
+
+# Since default tiboot3.bin on J721e is for GP, add a version for SR2.0 HS-SE
+IMAGE_BOOT_FILES += "tiboot3-j7200_sr2-hs-evm.bin"
+
 TFA_BOARD = "generic"
 
 OPTEEMACHINE = "k3-j721e"

meta-ti-bsp/conf/machine/include/j721e.inc

@@ -12,13 +12,21 @@ IMAGE_BOOT_FILES += "sysfw.itb"
 IMAGE_BOOT_FILES += "tiboot3-j721e-gp-evm.bin"
 IMAGE_BOOT_FILES += "sysfw-j721e-gp-evm.itb"
 
-# Since default on J721e is for GP, add a version for HS-FS
+# Since default on J721e is for GP, add a version for SR1.1 HS-FS
+IMAGE_BOOT_FILES += "tiboot3-j721e_sr1_1-hs-fs-evm.bin"
+IMAGE_BOOT_FILES += "sysfw-j721e_sr1_1-hs-fs-evm.itb"
+
+# Since default on J721e is for GP, add a version for SR1.1 HS-SE
+IMAGE_BOOT_FILES += "tiboot3-j721e_sr1_1-hs-evm.bin"
+IMAGE_BOOT_FILES += "sysfw-j721e_sr1_1-hs-evm.itb"
+
+# Since default on J721e is for GP, add a version for SR2.0 HS-FS
 IMAGE_BOOT_FILES += "tiboot3-j721e_sr2-hs-fs-evm.bin"
 IMAGE_BOOT_FILES += "sysfw-j721e_sr2-hs-fs-evm.itb"
 
-# Since default on J721e is for GP, add a version for HS-SE
-IMAGE_BOOT_FILES += "tiboot3-j721e_sr1_1-hs-evm.bin"
-IMAGE_BOOT_FILES += "sysfw-j721e_sr1_1-hs-evm.itb"
+# Since default on J721e is for GP, add a version for SR2.0 HS-SE
+IMAGE_BOOT_FILES += "tiboot3-j721e_sr2-hs-evm.bin"
+IMAGE_BOOT_FILES += "sysfw-j721e_sr2-hs-evm.itb"
 
 TFA_BOARD = "generic"
 

meta-ti-bsp/conf/machine/include/j721s2.inc

@@ -6,6 +6,15 @@ MACHINE_FEATURES += "screen gpu"
 require conf/machine/include/mesa-pvr.inc
 PREFERRED_PROVIDER_virtual/gpudriver ?= "ti-img-rogue-driver"
 
+# Default tiboot3.bin on J721S2 is for GP
+IMAGE_BOOT_FILES += "tiboot3-j721s2-gp-evm.bin"
+
+# Since default tiboot3.bin on J721S2 is for GP, add a version for SR1.0 HS-FS
+IMAGE_BOOT_FILES += "tiboot3-j721s2-hs-fs-evm.bin"
+
+# Since default tiboot3.bin on J721S2 is for GP, add a version for SR1.0 HS-SE
+IMAGE_BOOT_FILES += "tiboot3-j721s2-hs-evm.bin"
+
 TFA_BOARD = "generic"
 
 OPTEEMACHINE = "k3-j784s4"

meta-ti-bsp/conf/machine/include/j722s.inc

@@ -0,0 +1,22 @@
+require conf/machine/include/k3.inc
+SOC_FAMILY:append = ":j722s"
+
+MACHINE_FEATURES += "screen gpu"
+
+require conf/machine/include/mesa-pvr.inc
+PREFERRED_PROVIDER_virtual/gpudriver ?= "ti-img-rogue-driver"
+
+# Default tiboot3.bin on J722S is for HS-FS
+IMAGE_BOOT_FILES += "tiboot3-j722s-hs-fs-evm.bin"
+
+# Since default tiboot3.bin on J722S is for HS-FS, add a version for HS-SE
+IMAGE_BOOT_FILES += "tiboot3-j722s-hs-evm.bin"
+
+TFA_BOARD = "lite"
+TFA_K3_SYSTEM_SUSPEND = "1"
+
+OPTEEMACHINE = "k3-am62x"
+
+MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "cnm-wave-fw"
+
+SERIAL_CONSOLES = "115200;ttyS2"

meta-ti-bsp/conf/machine/include/j784s4.inc

@@ -6,6 +6,15 @@ MACHINE_FEATURES += "screen gpu"
 require conf/machine/include/mesa-pvr.inc
 PREFERRED_PROVIDER_virtual/gpudriver ?= "ti-img-rogue-driver"
 
+# Default tiboot3.bin on J784S4 is for GP
+IMAGE_BOOT_FILES += "tiboot3-j784s4-gp-evm.bin"
+
+# Since default tiboot3.bin on J784S4 is for GP, add a version for SR1.0 HS-FS
+IMAGE_BOOT_FILES += "tiboot3-j784s4-hs-fs-evm.bin"
+
+# Since default tiboot3.bin on J784S4 is for GP, add a version for SR1.0 HS-SE
+IMAGE_BOOT_FILES += "tiboot3-j784s4-hs-evm.bin"
+
 TFA_BOARD = "j784s4"
 
 OPTEEMACHINE = "k3-j784s4"

meta-ti-bsp/conf/machine/include/k3r5.inc

@@ -11,7 +11,7 @@ require conf/machine/include/arm/armv7a/tune-cortexa8.inc
 # https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/doc/board/ti/j721e_evm.rst
 # https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/doc/board/ti/am62x_sk.rst
 # https://git.ti.com/cgit/ti-u-boot/ti-u-boot/tree/doc/board/ti/k3.rst
-PREFERRED_PROVIDER_virtual/kernel ?= "linux-dummy"
+PREFERRED_PROVIDER_virtual/kernel = "linux-dummy"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-ti-staging"
 PREFERRED_PROVIDER_u-boot ?= "u-boot-ti-staging"
 

meta-ti-bsp/conf/machine/include/omap-a15.inc

@@ -53,5 +53,6 @@ MACHINE_FEATURES = "apm usbgadget usbhost vfat ext2 screen alsa gpu mmip dsp gc3
 
 IMAGE_FSTYPES += "tar.xz wic.xz wic.bmap"
 WKS_FILE ?= "sdimage-2part.wks"
-IMAGE_BOOT_FILES ?= "${SPL_BINARY} u-boot.${UBOOT_SUFFIX} ${UBOOT_EXTLINUX_BOOT_FILES}"
+IMAGE_BOOT_FILES ?= "${SPL_BINARY} u-boot.${UBOOT_SUFFIX} ${UBOOT_EXTLINUX_BOOT_FILES} ipc/dra7-ipu1-fw.xem4;dra7-ipu1-fw.xem4"
 do_image_wic[depends] += "virtual/bootloader:do_deploy"
+do_image_wic[depends] += "ti-ipc-rtos:do_deploy"

meta-ti-bsp/conf/machine/j721s2-evm.conf

@@ -12,6 +12,7 @@ KERNEL_DEVICETREE_PREFIX = " \
     ti/k3-fpdlink \
     ti/k3-j7200-evm-mcspi-loopback \
     ti/k3-am68-sk \
+    ti/k3-v3link \
 "
 
 KERNEL_DEVICETREE = " \
@@ -19,9 +20,3 @@ KERNEL_DEVICETREE = " \
 "
 
 UBOOT_MACHINE = "j721s2_evm_a72_defconfig"
-
-# Default tiboot3.bin on J721S2 is for GP
-IMAGE_BOOT_FILES += "tiboot3-j721s2-gp-evm.bin"
-
-# Since default tiboot3.bin on J721S2 is for GP, add a version for SR1.0 HS-FS
-IMAGE_BOOT_FILES += "tiboot3-j721s2-hs-fs-evm.bin"

meta-ti-bsp/conf/machine/j722s-evm-k3r5.conf

@@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME: J722S EVM (R5F)
+#@DESCRIPTION: Machine configuration for the TI J722S EVM (R5F core)
+
+require conf/machine/include/k3r5.inc
+
+SYSFW_SOC = "j722s"
+SYSFW_CONFIG = "evm"
+SYSFW_SUFFIX = "hs-fs"
+
+UBOOT_MACHINE = "j722s_evm_r5_defconfig"

meta-ti-bsp/conf/machine/j722s-evm.conf

@@ -0,0 +1,15 @@
+#@TYPE: Machine
+#@NAME: J722S EVM
+#@DESCRIPTION: Machine configuration for the TI J722S EVM
+
+require conf/machine/include/j722s.inc
+
+KERNEL_DEVICETREE_PREFIX = " \
+    ti/k3-j722s \
+    ti/k3-fpdlink \
+    ti/k3-v3link \
+"
+
+KERNEL_DEVICETREE = ""
+
+UBOOT_MACHINE = "j722s_evm_a53_defconfig"

meta-ti-bsp/conf/machine/j784s4-evm.conf

@@ -12,6 +12,7 @@ KERNEL_DEVICETREE_PREFIX = " \
     ti/k3-fpdlink \
     ti/k3-j7200-evm-mcspi-loopback \
     ti/k3-am69-sk \
+    ti/k3-v3link \
 "
 
 KERNEL_DEVICETREE = " \
@@ -19,9 +20,3 @@ KERNEL_DEVICETREE = " \
 "
 
 UBOOT_MACHINE = "j784s4_evm_a72_defconfig"
-
-# Default tiboot3.bin on J784S4 is for GP
-IMAGE_BOOT_FILES += "tiboot3-j784s4-gp-evm.bin"
-
-# Since default tiboot3.bin on J784S4 is for GP, add a version for SR1.0 HS-FS
-IMAGE_BOOT_FILES += "tiboot3-j784s4-hs-fs-evm.bin"

meta-ti-bsp/conf/multiconfig/k3r5.conf

@@ -4,4 +4,7 @@ DEPLOY_DIR_IMAGE:k3r5 = "${TI_COMMON_DEPLOY}/images/${MAINMACHINE}"
 
 MACHINE:append = "-k3r5"
 TCLIBC = "baremetal"
+TI_TMPDIR_APPEND ?= "-k3r5"
+TMPDIR:append = "${TI_TMPDIR_APPEND}"
+
 SDKPKGSUFFIX = "k3r5-nativesdk"

meta-ti-bsp/recipes-bsp/cadence-mhdp-fw/cadence-mhdp-fw_git.bb

@@ -8,18 +8,13 @@ LIC_FILES_CHKSUM = "file://LICENCE.cadence;md5=009f46816f6956cfb75ede13d3e1cee0"
 PV = "${CADENCE_MHDP_FW_VERSION}"
 PR = "${INC_PR}.0"
 
-CLEANBROKEN = "1"
-
 COMPATIBLE_MACHINE = "j721e|j721s2|j784s4"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
-S = "${WORKDIR}/git"
 TARGET = "mhdp8546.bin"
 
 do_install() {
 	install -d ${D}${nonarch_base_libdir}/firmware/cadence
 	install -m 0644 ${S}/cadence/${TARGET} ${D}${nonarch_base_libdir}/firmware/cadence/${TARGET}
 }
-
-FILES:${PN} = "${nonarch_base_libdir}/firmware"

meta-ti-bsp/recipes-bsp/cnm-wave-fw/cnm-wave-fw_git.bb

@@ -2,7 +2,6 @@ SUMMARY = "Chips&Media codec firmware files"
 
 require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
 
-inherit deploy
 inherit update-alternatives
 
 LICENSE = "BSD-3-Clause"
@@ -11,13 +10,10 @@ LIC_FILES_CHKSUM = "file://LICENCE.cnm;md5=93b67e6bac7f8fec22b96b8ad0a1a9d0"
 PV = "${CNM_WAVE521_FW_VERSION}"
 PR = "${INC_PR}.1"
 
-CLEANBROKEN = "1"
-
-COMPATIBLE_MACHINE = "j721s2|j784s4|am62axx|am62pxx"
+COMPATIBLE_MACHINE = "j721s2|j784s4|j722s|am62axx|am62pxx"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
-S = "${WORKDIR}/git"
 TARGET_WAVE521C = "wave521c_codec_fw.bin"
 
 SOURCE_WAVE521C = "wave521c_k3_codec_fw.bin"
@@ -33,10 +29,3 @@ do_install() {
 	install -d ${D}${nonarch_base_libdir}/firmware/cnm
 	install -m 0644 ${S}/cnm/${SOURCE_WAVE521C} ${D}${nonarch_base_libdir}/firmware/cnm/${TARGET_WAVE521C}
 }
-
-# make sure that lib/firmware, and all its contents are part of the package
-FILES:${PN} = "${nonarch_base_libdir}/firmware"
-
-# we don't want to configure and build the source code
-do_compile[noexec] = "1"
-do_configure[noexec] = "1"

meta-ti-bsp/recipes-bsp/cpsw9g-eth-fw/cpsw9g-eth-fw_git.bb

@@ -6,7 +6,6 @@ LIC_FILES_CHKSUM = "file://LICENSE.ti;md5=04ad0a015d4bb63c2b9e7b112debf3db"
 PV = "6.2+git${SRCPV}"
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
-inherit deploy
 inherit update-alternatives
 
 PROTOCOL = "https"

meta-ti-bsp/recipes-bsp/goodix-fw/goodix-fw_git.bb

@@ -8,13 +8,10 @@ LIC_FILES_CHKSUM = "file://LICENCE.Spectrum-GT9271;md5=2a6de6be7af1fe46370c684da
 PV = "${GOODIX_FW_VERSION}"
 PR = "${INC_PR}.0"
 
-CLEANBROKEN = "1"
-
 COMPATIBLE_MACHINE = "dra7xx"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
-S = "${WORKDIR}/git"
 ORIGIN = "DRA71x-RevA-GT9271_SpecDig_Config.bin"
 TARGET = "goodix_9271_cfg.bin"
 
@@ -22,5 +19,3 @@ do_install() {
 	install -d ${D}${nonarch_base_libdir}/firmware
 	install -m 0644 ${S}/ti-evm/${ORIGIN} ${D}${nonarch_base_libdir}/firmware/${TARGET}
 }
-
-FILES:${PN} = "${nonarch_base_libdir}/firmware"

meta-ti-bsp/recipes-bsp/powervr-drivers/ti-img-rogue-driver_23.3.6512818.bb

@@ -12,7 +12,7 @@ PR = "${MACHINE_KERNEL_PR}"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
-COMPATIBLE_MACHINE = "j721e|j721s2|j784s4|am62xx|am62pxx"
+COMPATIBLE_MACHINE = "j721e|j721s2|j784s4|am62xx|am62pxx|j722s"
 
 DEPENDS = "virtual/kernel"
 
@@ -22,13 +22,14 @@ SRC_URI = "git://git.ti.com/git/graphics/ti-img-rogue-driver.git;protocol=https;
 
 S = "${WORKDIR}/git"
 
-SRCREV = "778aa5d1e104f36c7f7c1f50e99f8499cbbdadbb"
+SRCREV = "c89c1efa4a1ee5da64fd525f45e9e33728cf6181"
 
 TARGET_PRODUCT:j721e = "j721e_linux"
 TARGET_PRODUCT:j721s2 = "j721s2_linux"
 TARGET_PRODUCT:j784s4 = "j784s4_linux"
 TARGET_PRODUCT:am62xx = "am62_linux"
 TARGET_PRODUCT:am62pxx = "am62p_linux"
+TARGET_PRODUCT:j722s = "j722s_linux"
 PVR_BUILD = "release"
 PVR_WS = "lws-generic"
 

meta-ti-bsp/recipes-bsp/powervr-drivers/ti-sgx-ddk-km_1.17.4948957.bb

@@ -22,7 +22,7 @@ SRC_URI = "git://git.ti.com/git/graphics/omap5-sgx-ddk-linux.git;protocol=https;
 
 S = "${WORKDIR}/git"
 
-SRCREV = "2cb2c9609b7740cb2c348e669a96f26e1cc858da"
+SRCREV = "652ae16657cc4acda664e669d0c9b4891252f37f"
 
 TARGET_PRODUCT:omap-a15 = "ti572x_linux"
 TARGET_PRODUCT:ti33x = "ti335x_linux"

meta-ti-bsp/recipes-bsp/prueth-fw/prueth-fw-am65x-sr2_git.bb

@@ -5,14 +5,10 @@ require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
 PV = "${PRUETH_FW_AM65X_SR2_VERSION}"
 PR = "${INC_PR}.0"
 
-CLEANBROKEN = "1"
-
 COMPATIBLE_MACHINE = "am65xx-evm|am64xx"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
-S = "${WORKDIR}/git"
-
 TARGET = " \
     am65x-sr2-pru0-prueth-fw.elf \
     am65x-sr2-pru1-prueth-fw.elf \
@@ -28,7 +24,3 @@ do_install() {
 		install -m 0644 ${S}/ti-pruss/$f ${D}${nonarch_base_libdir}/firmware/ti-pruss/$f
 	done
 }
-
-FILES:${PN} = "${nonarch_base_libdir}/firmware"
-
-INSANE_SKIP:${PN} = "arch"

meta-ti-bsp/recipes-bsp/prueth-fw/prueth-fw-am65x_git.bb

@@ -5,14 +5,10 @@ require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
 PV = "${PRUETH_FW_AM65X_VERSION}"
 PR = "${INC_PR}.0"
 
-CLEANBROKEN = "1"
-
 COMPATIBLE_MACHINE = "am65xx"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
-S = "${WORKDIR}/git"
-
 TARGET = " \
     am65x-pru0-prueth-fw.elf \
     am65x-pru1-prueth-fw.elf \
@@ -26,7 +22,3 @@ do_install() {
 		install -m 0644 ${S}/ti-pruss/$f ${D}${nonarch_base_libdir}/firmware/ti-pruss/$f
 	done
 }
-
-FILES:${PN} = "${nonarch_base_libdir}/firmware"
-
-INSANE_SKIP:${PN} = "arch"

meta-ti-bsp/recipes-bsp/prueth-fw/prueth-fw_5.6.15.bb

@@ -4,14 +4,10 @@ require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
 
 PR = "${INC_PR}.0"
 
-CLEANBROKEN = "1"
-
 COMPATIBLE_MACHINE = "ti33x|ti43x|am57xx"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
-S = "${WORKDIR}/git"
-
 TARGET = ""
 TARGET:ti33x = "am335x-pru0-prueth-fw.elf am335x-pru1-prueth-fw.elf"
 TARGET:ti43x = "am437x-pru0-prueth-fw.elf am437x-pru1-prueth-fw.elf"
@@ -23,8 +19,3 @@ do_install() {
 		install -m 0644 ${S}/ti-pruss/$f ${D}${nonarch_base_libdir}/firmware/ti-pruss/$f
 	done
 }
-
-
-FILES:${PN} = "${nonarch_base_libdir}/firmware"
-
-INSANE_SKIP:${PN} = "arch"

meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw-am65x-sr2_git.bb

@@ -5,14 +5,10 @@ require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
 PV = "${PRUETH_FW_AM65X_SR2_VERSION}"
 PR = "${INC_PR}.0"
 
-CLEANBROKEN = "1"
-
 COMPATIBLE_MACHINE = "am65xx-evm|am64xx"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
-S = "${WORKDIR}/git"
-
 TARGET = " \
     am65x-sr2-pru0-pruhsr-fw.elf \
     am65x-sr2-pru1-pruhsr-fw.elf \
@@ -28,7 +24,3 @@ do_install() {
 		install -m 0644 ${S}/ti-pruss/$f ${D}${nonarch_base_libdir}/firmware/ti-pruss/$f
 	done
 }
-
-FILES:${PN} = "${nonarch_base_libdir}/firmware"
-
-INSANE_SKIP:${PN} = "arch"

meta-ti-bsp/recipes-bsp/pruhsr-fw/pruhsr-fw_2.17.25.bb

@@ -5,14 +5,10 @@ require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
 PE = "1"
 PR = "${INC_PR}.0"
 
-CLEANBROKEN = "1"
-
 COMPATIBLE_MACHINE = "ti33x|ti43x|am57xx"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
-S = "${WORKDIR}/git"
-
 TARGET = ""
 TARGET:ti33x = "am335x-pru0-pruhsr-fw.elf am335x-pru1-pruhsr-fw.elf"
 TARGET:ti43x = "am437x-pru0-pruhsr-fw.elf am437x-pru1-pruhsr-fw.elf"
@@ -24,7 +20,3 @@ do_install() {
 		install -m 0644 ${S}/ti-pruss/$f ${D}${nonarch_base_libdir}/firmware/ti-pruss/$f
 	done
 }
-
-FILES:${PN} = "${nonarch_base_libdir}/firmware"
-
-INSANE_SKIP:${PN} = "arch"

meta-ti-bsp/recipes-bsp/pruprp-fw/pruprp-fw_2.17.25.bb

@@ -5,14 +5,10 @@ require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
 PE = "1"
 PR = "${INC_PR}.0"
 
-CLEANBROKEN = "1"
-
 COMPATIBLE_MACHINE = "ti33x|ti43x|am57xx"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
-S = "${WORKDIR}/git"
-
 TARGET = ""
 TARGET:ti33x = "am335x-pru0-pruprp-fw.elf am335x-pru1-pruprp-fw.elf"
 TARGET:ti43x = "am437x-pru0-pruprp-fw.elf am437x-pru1-pruprp-fw.elf"
@@ -24,7 +20,3 @@ do_install() {
 		install -m 0644 ${S}/ti-pruss/$f ${D}${nonarch_base_libdir}/firmware/ti-pruss/$f
 	done
 }
-
-FILES:${PN} = "${nonarch_base_libdir}/firmware"
-
-INSANE_SKIP:${PN} = "arch"

meta-ti-bsp/recipes-bsp/prusw-fw/prusw-fw-am65x-sr2_git.bb

@@ -5,14 +5,10 @@ require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
 PV = "${PRUETH_FW_AM65X_SR2_VERSION}"
 PR = "${INC_PR}.0"
 
-CLEANBROKEN = "1"
-
 COMPATIBLE_MACHINE = "am65xx-evm|am64xx"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
-S = "${WORKDIR}/git"
-
 TARGET = " \
     am65x-sr2-pru0-prusw-fw.elf \
     am65x-sr2-pru1-prusw-fw.elf \
@@ -28,7 +24,3 @@ do_install() {
 		install -m 0644 ${S}/ti-pruss/$f ${D}${nonarch_base_libdir}/firmware/ti-pruss/$f
 	done
 }
-
-FILES:${PN} = "${nonarch_base_libdir}/firmware"
-
-INSANE_SKIP:${PN} = "arch"

meta-ti-bsp/recipes-bsp/prusw-fw/prusw-fw_3.2.9.bb

@@ -4,14 +4,10 @@ require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
 
 PR = "${INC_PR}.0"
 
-CLEANBROKEN = "1"
-
 COMPATIBLE_MACHINE = "ti33x|ti43x|am57xx"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
-S = "${WORKDIR}/git"
-
 TARGET = ""
 TARGET:ti33x = "am335x-pru0-prusw-fw.elf am335x-pru1-prusw-fw.elf"
 TARGET:ti43x = "am437x-pru0-prusw-fw.elf am437x-pru1-prusw-fw.elf"
@@ -23,8 +19,3 @@ do_install() {
 		install -m 0644 ${S}/ti-pruss/$f ${D}${nonarch_base_libdir}/firmware/ti-pruss/$f
 	done
 }
-
-
-FILES:${PN} = "${nonarch_base_libdir}/firmware"
-
-INSANE_SKIP:${PN} = "arch"

meta-ti-bsp/recipes-bsp/ti-dm-fw/ti-dm-fw.bb

@@ -1,7 +1,7 @@
 SUMMARY = "TI DM prebuilt binary firmware images"
 
 LICENSE = "TI-TFL"
-LIC_FILES_CHKSUM = "file://${COREBASE}/../meta-ti/licenses/TI-TFL;md5=a1b59cb7ba626b9dbbcbf00f3fbc438a"
+LIC_FILES_CHKSUM = "file://${THISDIR}/../../licenses/TI-TFL;md5=a1b59cb7ba626b9dbbcbf00f3fbc438a"
 
 COMPATIBLE_MACHINE = "k3"
 
@@ -17,8 +17,6 @@ require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
 PV = "${TI_DM_FW_VERSION}"
 PR = "${INC_PR}.0"
 
-CLEANBROKEN = "1"
-
 # Secure Build
 inherit ti-secdev
 
@@ -27,6 +25,7 @@ PLAT_SFX:j721e = "j721e"
 PLAT_SFX:j7200 = "j7200"
 PLAT_SFX:j721s2 = "j721s2"
 PLAT_SFX:j784s4 = "j784s4"
+PLAT_SFX:j722s = "j722s"
 PLAT_SFX:am65xx = "am65xx"
 PLAT_SFX:am64xx = "am64xx"
 PLAT_SFX:am62xx = "am62xx"
@@ -44,6 +43,7 @@ DM_FW_LIST:j721e =   "${DM_FIRMWARE}"
 DM_FW_LIST:j7200 =   "${DM_FIRMWARE}"
 DM_FW_LIST:j721s2 =  "${DM_FIRMWARE}"
 DM_FW_LIST:j784s4 =  "${DM_FIRMWARE}"
+DM_FW_LIST:j722s =   "${DM_FIRMWARE}"
 DM_FW_LIST:am65xx =  ""
 DM_FW_LIST:am64xx =  ""
 DM_FW_LIST:am62xx =  "${DM_FIRMWARE}"
@@ -85,6 +85,7 @@ ALTERNATIVE:${PN}:j721e   = "j7-mcu-r5f0_0-fw"
 ALTERNATIVE:${PN}:j7200   = "j7200-mcu-r5f0_0-fw"
 ALTERNATIVE:${PN}:j721s2  = "j721s2-mcu-r5f0_0-fw"
 ALTERNATIVE:${PN}:j784s4  = "j784s4-mcu-r5f0_0-fw"
+ALTERNATIVE:${PN}:j722s   = "j722s-wkup-r5f0_0-fw"
 
 # Set up link names for the firmwares
 ALTERNATIVE_LINK_NAME[am62-main-r5f0_0-fw]  = "${nonarch_base_libdir}/firmware/am62-main-r5f0_0-fw"
@@ -94,6 +95,7 @@ ALTERNATIVE_LINK_NAME[j7-mcu-r5f0_0-fw]     = "${nonarch_base_libdir}/firmware/j
 ALTERNATIVE_LINK_NAME[j7200-mcu-r5f0_0-fw]  = "${nonarch_base_libdir}/firmware/j7200-mcu-r5f0_0-fw"
 ALTERNATIVE_LINK_NAME[j721s2-mcu-r5f0_0-fw] = "${nonarch_base_libdir}/firmware/j721s2-mcu-r5f0_0-fw"
 ALTERNATIVE_LINK_NAME[j784s4-mcu-r5f0_0-fw] = "${nonarch_base_libdir}/firmware/j784s4-mcu-r5f0_0-fw"
+ALTERNATIVE_LINK_NAME[j722s-wkup-r5f0_0-fw] = "${nonarch_base_libdir}/firmware/j722s-wkup-r5f0_0-fw"
 
 # Create the firmware alternatives
 ALTERNATIVE_TARGET[am62-main-r5f0_0-fw]  = "${INSTALL_DM_FW_DIR}/${DM_FIRMWARE}"
@@ -103,22 +105,8 @@ ALTERNATIVE_TARGET[j7-mcu-r5f0_0-fw]     = "${INSTALL_DM_FW_DIR}/${DM_FIRMWARE}"
 ALTERNATIVE_TARGET[j7200-mcu-r5f0_0-fw]  = "${INSTALL_DM_FW_DIR}/${DM_FIRMWARE}"
 ALTERNATIVE_TARGET[j721s2-mcu-r5f0_0-fw] = "${INSTALL_DM_FW_DIR}/${DM_FIRMWARE}"
 ALTERNATIVE_TARGET[j784s4-mcu-r5f0_0-fw] = "${INSTALL_DM_FW_DIR}/${DM_FIRMWARE}"
+ALTERNATIVE_TARGET[j722s-wkup-r5f0_0-fw] = "${INSTALL_DM_FW_DIR}/${DM_FIRMWARE}"
 
 ALTERNATIVE_PRIORITY = "10"
 
-# make sure that lib/firmware, and all its contents are part of the package
-FILES:${PN} += "${nonarch_base_libdir}/firmware"
-
-# This is used to prevent the build system to_strip the executables
-INHIBIT_PACKAGE_STRIP = "1"
-INHIBIT_SYSROOT_STRIP = "1"
-# This is used to prevent the build system to split the debug info in a separate file
-INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
-# As it likely to be a different arch from the Yocto build, disable checking by adding "arch" to INSANE_SKIP
-INSANE_SKIP:${PN} += "arch"
-
-# we don't want to configure and build the source code
-do_compile[noexec] = "1"
-do_configure[noexec] = "1"
-
 addtask deploy after do_install

meta-ti-bsp/recipes-bsp/ti-eth-fw/ti-eth-fw.bb

@@ -1,7 +1,7 @@
 SUMMARY = "TI Ethernet prebuilt binary firmware images"
 
 LICENSE = "TI-TFL"
-LIC_FILES_CHKSUM = "file://${COREBASE}/../meta-ti/licenses/TI-TFL;md5=a1b59cb7ba626b9dbbcbf00f3fbc438a"
+LIC_FILES_CHKSUM = "file://${THISDIR}/../../licenses/TI-TFL;md5=a1b59cb7ba626b9dbbcbf00f3fbc438a"
 
 COMPATIBLE_MACHINE = "k3"
 
@@ -9,7 +9,6 @@ PACKAGE_ARCH = "${MACHINE_ARCH}"
 
 INHIBIT_DEFAULT_DEPS = "1"
 
-inherit deploy
 inherit update-alternatives
 
 require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
@@ -17,8 +16,6 @@ require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
 PV = "${CORESDK_RTOS_VERSION}"
 PR = "${INC_PR}.0"
 
-CLEANBROKEN = "1"
-
 # Secure Build
 inherit ti-secdev
 
@@ -27,6 +24,7 @@ PLAT_SFX:j721e = "j721e"
 PLAT_SFX:j7200 = "j7200"
 PLAT_SFX:j721s2 = "j721s2"
 PLAT_SFX:j784s4 = "j784s4"
+PLAT_SFX:j722s = "j722s"
 PLAT_SFX:am65xx = "am65xx"
 PLAT_SFX:am64xx = "am64xx"
 PLAT_SFX:am62xx = "am62xx"
@@ -44,10 +42,11 @@ ETH_FW_LIST:j721e =   "${ETH_FW}"
 ETH_FW_LIST:j7200 =   "${ETH_FW}"
 ETH_FW_LIST:j721s2 =  ""
 ETH_FW_LIST:j784s4 =  "${ETH_FW}"
+ETH_FW_LIST:j722s =   ""
 ETH_FW_LIST:am65xx =  ""
 ETH_FW_LIST:am64xx =  ""
 ETH_FW_LIST:am62xx =  ""
-ETH_FW_LIST:am62pxx =  ""
+ETH_FW_LIST:am62pxx = ""
 ETH_FW_LIST:am62axx = ""
 
 do_install() {
@@ -103,18 +102,3 @@ ALTERNATIVE_TARGET[j784s4-main-r5f0_0-fw]     = "${INSTALL_ETH_FW_DIR}/${ETH_FW}
 ALTERNATIVE_TARGET[j784s4-main-r5f0_0-fw-sec] = "${INSTALL_ETH_FW_DIR}/${ETH_FW}.signed"
 
 ALTERNATIVE_PRIORITY = "5"
-
-# make sure that lib/firmware, and all its contents are part of the package
-FILES:${PN} += "${nonarch_base_libdir}/firmware"
-
-# This is used to prevent the build system to_strip the executables
-INHIBIT_PACKAGE_STRIP = "1"
-INHIBIT_SYSROOT_STRIP = "1"
-# This is used to prevent the build system to split the debug info in a separate file
-INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
-# As it likely to be a different arch from the Yocto build, disable checking by adding "arch" to INSANE_SKIP
-INSANE_SKIP:${PN} += "arch"
-
-# we don't want to configure and build the source code
-do_compile[noexec] = "1"
-do_configure[noexec] = "1"

meta-ti-bsp/recipes-bsp/ti-img-encode-decode/vxd-dec-fw_git.bb

@@ -7,18 +7,13 @@ require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
 PV = "${IMG_DEC_FW_VERSION}"
 PR = "${INC_PR}.0"
 
-CLEANBROKEN = "1"
-
 COMPATIBLE_MACHINE = "j721e"
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
-S = "${WORKDIR}/git"
 TARGET = "pvdec_full_bin.fw"
 
 do_install() {
         install -d ${D}${nonarch_base_libdir}/firmware
         install -m 0644 ${S}/ti-img/${TARGET} ${D}${nonarch_base_libdir}/firmware/${TARGET}
 }
-
-FILES:${PN} = "${nonarch_base_libdir}/firmware"

meta-ti-bsp/recipes-bsp/ti-linux-fw/ti-linux-fw.inc

@@ -9,15 +9,15 @@ INC_PR = "r4"
 # Firmware versions
 CORESDK_RTOS_VERSION = "08.02.00.04"
 PRUETH_FW_AM65X_VERSION = "08.00.00.20"
-PRUETH_FW_AM65X_SR2_VERSION = "02.02.11.02"
+PRUETH_FW_AM65X_SR2_VERSION = "02.02.15.00"
 GOODIX_FW_VERSION = "1.0.0.0"
 CADENCE_MHDP_FW_VERSION = "2.1.0"
 IMG_DEC_FW_VERSION = "1.0"
-CNM_WAVE521_FW_VERSION = "1.0.00"
-TI_DM_FW_VERSION = "08.06.04"
-TI_SYSFW_VERSION = "08.06.04"
+CNM_WAVE521_FW_VERSION = "1.0.5"
+TI_DM_FW_VERSION = "10.01.03"
+TI_SYSFW_VERSION = "10.01.08"
 
-TI_LINUX_FW_SRCREV ?= "fc8e9ddf23ba6cf071c1c225e78c2bd8733d7780"
+TI_LINUX_FW_SRCREV ?= "1eaf07dc4ec5cdeb98078f17a9d4635e88f43f75"
 SRCREV = "${TI_LINUX_FW_SRCREV}"
 
 BRANCH ?= "ti-linux-firmware"
@@ -25,3 +25,22 @@ BRANCH ?= "ti-linux-firmware"
 SRC_URI = "git://git.ti.com/git/processor-firmware/ti-linux-firmware.git;protocol=https;branch=${BRANCH}"
 
 S = "${WORKDIR}/git"
+
+CLEANBROKEN = "1"
+
+# Make sure that lib/firmware, and all its contents are part of the package
+FILES:${PN} = "${nonarch_base_libdir}/firmware"
+
+# This is used to prevent the build system from stripping the firmwares
+INHIBIT_PACKAGE_STRIP = "1"
+INHIBIT_SYSROOT_STRIP = "1"
+
+# This is used to prevent the build system from splitting out the firmware debug info into a separate file
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+
+# Disable arch checking as firmware is likely to be a different arch from the Yocto build
+INSANE_SKIP:${PN} += "arch"
+
+# Firmware in Linux Firmware has no configure nor build steps
+do_compile[noexec] = "1"
+do_configure[noexec] = "1"

meta-ti-bsp/recipes-bsp/ti-sci-fw/ti-sci-fw_git.bb

@@ -6,16 +6,9 @@ require recipes-bsp/ti-linux-fw/ti-linux-fw.inc
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
-CFLAGS[unexport] = "1"
-LDFLAGS[unexport] = "1"
-AS[unexport] = "1"
-LD[unexport] = "1"
-
 PV = "${TI_SYSFW_VERSION}"
 PR = "${INC_PR}.0"
 
-CLEANBROKEN = "1"
-
 do_install() {
 	install -d ${D}${nonarch_base_libdir}/firmware/ti-sysfw
 	install -m 644 ${S}/ti-sysfw/ti-sci-firmware-* ${D}${nonarch_base_libdir}/firmware/ti-sysfw
@@ -23,8 +16,6 @@ do_install() {
 	install -m 644 ${S}/ti-sysfw/ti-fs-stub-firmware-* ${D}${nonarch_base_libdir}/firmware/ti-sysfw
 }
 
-FILES:${PN} = "${nonarch_base_libdir}/firmware"
-
 do_deploy(){
 }
 

meta-ti-bsp/recipes-bsp/trusted-firmware-a/trusted-firmware-a-ti.inc

@@ -1,5 +1,5 @@
-PV:k3 = "2.9+git${SRCPV}"
-SRCREV_tfa:k3 = "d7a7135d32a8c7da004c0c19b75bd4e2813f9759"
+PV:k3 = "2.10+git${SRCPV}"
+SRCREV_tfa:k3 = "00f1ec6b8740ccd403e641131e294aabacf2a48b"
 SRC_URI:k3 = "git://git.trustedfirmware.org/TF-A/trusted-firmware-a.git;protocol=https;name=tfa;branch=master"
 COMPATIBLE_MACHINE:k3 = "k3"
 TFA_BUILD_TARGET:k3 = "all"

meta-ti-bsp/recipes-bsp/u-boot/ti-extras.inc

@@ -1,12 +1,12 @@
 
 # This will have priority over generic uboot path
 
-COMPATIBLE_MACHINE = "am62xx"
+COMPATIBLE_MACHINE = "am62xx|am62pxx"
 
 BRANCH = "ti-u-boot-2023.04"
 BRANCH:tie-jailhouse = "ti-u-boot-2023.04-jailhouse"
 
-SRCREV = "010afc1fe7a1412f92363c8af69c848d76a53e42"
-SRCREV:tie-jailhouse = "79615e1c99b9aa73948f811f5f866cff2e34dc37"
+SRCREV = "b0d868ee086eb5c96a3d32f72a7cb9670abf5b90"
+SRCREV:tie-jailhouse = "765cab112d16fcf68a3266738073663dae67a55d"
 
 UBOOT_GIT_URI = "git://git.ti.com/git/processor-sdk/u-boot.git"

meta-ti-bsp/recipes-bsp/u-boot/u-boot-bb.org_git.bb

@@ -8,10 +8,10 @@ PV = "2023.04"
 
 UBOOT_GIT_URI = "git://github.com/beagleboard/u-boot.git"
 UBOOT_GIT_PROTOCOL = "https"
-BRANCH = "v2023.04-ti-09.00.00.011"
-SRCREV = "4b8f8be8870f03d92a2b01d0d30ab912118adc82"
+BRANCH = "v2023.04-ti-09.01.00.008"
+SRCREV = "b0d717b732ee28e446baf94522b3491e590f7fbb"
 
-BRANCH:beagleplay = "v2023.04-ti-09.00.00.011-BeaglePlay"
-BRANCH:beagleplay-k3r5 = "v2023.04-ti-09.00.00.011-BeaglePlay"
-SRCREV:beagleplay = "10afea462ea1113701f6f0f8853fdff985aa275d"
-SRCREV:beagleplay-k3r5 = "10afea462ea1113701f6f0f8853fdff985aa275d"
+BRANCH:beagleplay = "v2023.04-ti-09.01.00.008-BeaglePlay"
+BRANCH:beagleplay-k3r5 = "v2023.04-ti-09.01.00.008-BeaglePlay"
+SRCREV:beagleplay = "43791d945f4e5c25bcc19b9c778e8f9d194dc16e"
+SRCREV:beagleplay-k3r5 = "43791d945f4e5c25bcc19b9c778e8f9d194dc16e"

meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-mainline_git.bb

@@ -2,7 +2,7 @@ require u-boot-ti.inc
 
 PR = "r0"
 
-PV = "2023.07"
+PV = "2024.01"
 
 # For the un-initiated:
 # The actual URL you'd use with a git clone for example would be:
@@ -13,4 +13,4 @@ PV = "2023.07"
 # b) and we want git fetcher to use https protocol, hence GIT_PROTOCOL as https
 UBOOT_GIT_URI = "git://source.denx.de/u-boot/u-boot.git"
 UBOOT_GIT_PROTOCOL = "https"
-SRCREV = "83cdab8b2c6ea0fc0860f8444d083353b47f1d5c"
+SRCREV = "866ca972d6c3cabeaf6dbac431e8e08bb30b3c8e"

meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti-staging_2023.04.bb

@@ -6,14 +6,4 @@ PR = "r0"
 
 BRANCH = "ti-u-boot-2023.04"
 
-SRCREV = "b0d868ee086eb5c96a3d32f72a7cb9670abf5b90"
-
-do_install:append:am62xx() {
-	install -d ${D}/boot
-	install -m 0644 ${S}/tools/logos/ti_logo_414x97_32bpp.bmp.gz ${D}/boot
-}
-
-do_deploy:append:am62xx() {
-	install -d ${DEPLOYDIR}
-	install -m 0644 ${S}/tools/logos/ti_logo_414x97_32bpp.bmp.gz ${DEPLOYDIR}
-}
+SRCREV = "2bedcd265ca6de803c90505df5962cbd70cda611"

meta-ti-bsp/recipes-bsp/u-boot/u-boot-ti.inc

@@ -1,6 +1,9 @@
-# UBOOT_LOCALVERSION can be set to add a tag to the end of the
-# U-boot version string.  such as the commit id
-UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).replace('AUTOINC+','')[:10]}"
+do_compile:prepend () {
+    scm_version=$(printf '%s%s' -ti-g $(git -C ${S} rev-parse --verify HEAD 2>/dev/null | cut -c1-12))
+
+    echo ${scm_version} > ${B}/.scmversion
+    echo ${scm_version} > ${S}/.scmversion
+}
 
 UBOOT_SUFFIX ?= "img"
 SPL_BINARY ?= "MLO"
@@ -40,6 +43,7 @@ PLAT_SFX:j721e = "j721e"
 PLAT_SFX:j7200 = "j7200"
 PLAT_SFX:j721s2 = "j721s2"
 PLAT_SFX:j784s4 = "j784s4"
+PLAT_SFX:j722s = "j722s"
 PLAT_SFX:am65xx = "am65xx"
 PLAT_SFX:am64xx = "am64xx"
 PLAT_SFX:am62xx = "am62xx"
@@ -55,6 +59,7 @@ PACKAGECONFIG:append:j721e = " dm"
 PACKAGECONFIG:append:j7200 = " dm"
 PACKAGECONFIG:append:j721s2 = " dm"
 PACKAGECONFIG:append:j784s4 = " dm"
+PACKAGECONFIG:append:j722s = " dm"
 PACKAGECONFIG:append:am62xx = " dm"
 PACKAGECONFIG:append:am62axx = " dm"
 PACKAGECONFIG:append:am62pxx = " dm"
@@ -216,6 +221,13 @@ do_deploy:append:k3r5 () {
 			install -m 644 $f ${DEPLOYDIR}/
 		fi
 	done
+
+	rm ${DEPLOYDIR}/u-boot-initial-env || true
+	rm ${DEPLOYDIR}/${PN}-initial-env || true
+	rm ${DEPLOYDIR}/u-boot-initial-env-${MACHINE} || true
+	rm ${DEPLOYDIR}/${PN}-initial-env-${MACHINE} || true
+	rm ${DEPLOYDIR}/u-boot-initial-env-${MACHINE}-${PV}-${PR} || true
+	rm ${DEPLOYDIR}/${PN}-initial-env-${MACHINE}-${PV}-${PR} || true
 }
 
 do_deploy:append () {
@@ -320,13 +332,26 @@ do_deploy:append () {
 			ln -sf ${UBOOT_HS_2ND_IMAGE} ${UBOOT_HS_2ND_BINARY}
 		fi
 	fi
+}
 
-	rm ${DEPLOYDIR}/u-boot-initial-env || true
-	rm ${DEPLOYDIR}/${PN}-initial-env || true
-	rm ${DEPLOYDIR}/u-boot-initial-env-${MACHINE} || true
-	rm ${DEPLOYDIR}/${PN}-initial-env-${MACHINE} || true
-	rm ${DEPLOYDIR}/u-boot-initial-env-${MACHINE}-${PV}-${PR} || true
-	rm ${DEPLOYDIR}/${PN}-initial-env-${MACHINE}-${PV}-${PR} || true
+do_install:append:am62xx() {
+	install -d ${D}/boot
+	install -m 0644 ${S}/tools/logos/ti_logo_414x97_32bpp.bmp.gz ${D}/boot
+}
+
+do_deploy:append:am62xx() {
+	install -d ${DEPLOYDIR}
+	install -m 0644 ${S}/tools/logos/ti_logo_414x97_32bpp.bmp.gz ${DEPLOYDIR}
+}
+
+do_install:append:am62pxx() {
+	install -d ${D}/boot
+	install -m 0644 ${S}/tools/logos/ti_logo_414x97_32bpp.bmp.gz ${D}/boot
+}
+
+do_deploy:append:am62pxx() {
+	install -d ${DEPLOYDIR}
+	install -m 0644 ${S}/tools/logos/ti_logo_414x97_32bpp.bmp.gz ${DEPLOYDIR}
 }
 
 TOOLCHAIN = "gcc"

meta-ti-bsp/recipes-bsp/vpdma-fw/vpdma-fw_03-2012.bb

@@ -6,8 +6,6 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=fd463c9500441ed91d07a0331baa635c"
 COMPATIBLE_MACHINE = "dra7xx"
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
-DEPENDS += "virtual/kernel"
-
 SRC_URI = "http://downloads.ti.com/dsps/dsps_public_sw/glsdk/vpdma-fw/03-2012/exports/vpdma-fw_03-2012.tar.gz;protocol=http;name=dra7xx-evm"
 SRC_URI[dra7xx-evm.md5sum] = "80176df1350c21d9efa90171789c546e"
 SRC_URI[dra7xx-evm.sha256sum] = "a0b254ffd0c7f481cb3989e632088f5e4a233c73a1c676faa3061721ea60dc90"

meta-ti-bsp/recipes-devtools/k3conf/k3conf_git.bb

@@ -1,18 +1,17 @@
 SUMMARY = "Diagnostic tool for TI K3 processors"
 
 LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://common/k3conf.c;beginline=1;endline=34;md5=7154c0ffcd418064ffa528e34e70ca9d"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=a56bddef00b39fb0f45488fdc4ce108f"
 
 inherit cmake
 
-PV = "0.2+git${SRCPV}"
+PV = "0.3+git${SRCPV}"
 
 COMPATIBLE_MACHINE = "k3"
 
 BRANCH ?= "master"
-SRCREV = "de06befe878be061a40540d2127d4273320b35bc"
+SRCREV = "30a1d5b2d08c0da39d4e62b3ebee591a9882fa21"
 
 SRC_URI = "git://git.ti.com/git/k3conf/k3conf.git;protocol=https;branch=${BRANCH}"
 
 S = "${WORKDIR}/git"
-

meta-ti-bsp/recipes-graphics/mesa/mesa-pvr_22.3.5.bb

@@ -23,13 +23,13 @@ SRC_URI = " \
 
 S = "${WORKDIR}/git"
 
-SRCREV = "7c9522a4147836064f582278e4f7115735c16868"
-
 PACKAGECONFIG:append = " \
     ${@bb.utils.contains('PREFERRED_PROVIDER_virtual/gpudriver', 'ti-img-rogue-driver', 'pvr', '', d)} \
     ${@bb.utils.contains('PREFERRED_PROVIDER_virtual/gpudriver', 'ti-sgx-ddk-km', 'sgx', '', d)} \
 "
 
+SRCREV = "c9f0919367589b38f5682183846de9d60eec082d"
+
 PVR_DISPLAY_CONTROLLER_ALIAS ??= "tidss"
 PACKAGECONFIG[pvr] = "-Dgallium-pvr-alias=${PVR_DISPLAY_CONTROLLER_ALIAS},"
 PACKAGECONFIG[sgx] = "-Dgallium-sgx-alias=${PVR_DISPLAY_CONTROLLER_ALIAS},"

meta-ti-bsp/recipes-graphics/powervr-umlibs/ti-img-rogue-umlibs_23.3.6512818.bb

@@ -6,13 +6,13 @@ LIC_FILES_CHKSUM = "file://${WORKDIR}/git/LICENSE;md5=7232b98c1c58f99e3baa03de52
 inherit bin_package
 
 PACKAGE_ARCH = "${MACHINE_ARCH}"
-COMPATIBLE_MACHINE = "j721e|j721s2|j784s4|am62xx|am62pxx"
+COMPATIBLE_MACHINE = "j721e|j721s2|j784s4|am62xx|am62pxx|j722s"
 
 PR = "r2"
 
 BRANCH = "linuxws/kirkstone/k6.1/${PV}"
 SRC_URI = "git://git.ti.com/git/graphics/ti-img-rogue-umlibs.git;protocol=https;branch=${BRANCH}"
-SRCREV = "d0543929cc6fe53959a64c60285896e2c14ed314"
+SRCREV = "0b9e64254269be2fa95c4f3e1dd925d6e4d58199"
 S = "${WORKDIR}/git/targetfs/${TARGET_PRODUCT}/${PVR_WS}/${PVR_BUILD}"
 
 TARGET_PRODUCT:j721e = "j721e_linux"
@@ -20,6 +20,7 @@ TARGET_PRODUCT:j721s2 = "j721s2_linux"
 TARGET_PRODUCT:j784s4 = "j784s4_linux"
 TARGET_PRODUCT:am62xx = "am62_linux"
 TARGET_PRODUCT:am62pxx = "am62p_linux"
+TARGET_PRODUCT:j722s = "j722s_linux"
 PVR_BUILD = "release"
 PVR_WS = "lws-generic"
 
@@ -30,7 +31,7 @@ RDEPENDS:${PN} = " \
 "
 
 PACKAGECONFIG ?= " \
-    ${@bb.utils.contains('DISTRO_FEATURES', 'vulkan x11 wayland', 'vulkan', '', d)} \
+    ${@bb.utils.contains('DISTRO_FEATURES', 'vulkan wayland', 'vulkan', '', d)} \
     ${@bb.utils.filter('DISTRO_FEATURES', 'opengl opencl', d)} \
 "
 
@@ -118,7 +119,7 @@ RDEPENDS:libgles2-rogue += "mesa-megadriver"
 
 # vulkan specific shared objects and configs
 FILES:libvk-rogue = "${libdir}/libVK_IMG.so* ${datadir}/vulkan"
-RDEPENDS:libvk-rogue += "vulkan-loader libx11-xcb wayland libdrm"
+RDEPENDS:libvk-rogue += "vulkan-loader wayland libdrm"
 
 # opencl specific shared objects and configs
 FILES:libopencl-rogue = "${libdir}/libPVROCL.so* ${sysconfdir}/OpenCL"

meta-ti-bsp/recipes-graphics/powervr-umlibs/ti-sgx-ddk-um_1.17.4948957.bb

@@ -13,18 +13,27 @@ BRANCH = "${PV}/mesa/glibc-2.35"
 SRC_URI = " \
     git://git.ti.com/git/graphics/omap5-sgx-ddk-um-linux.git;protocol=https;branch=${BRANCH} \
 "
-SRCREV = "70364424dd496833fad5b243c9e6cc8b077f04ac"
+SRCREV = "84a396a4fb379f10931421e489ac8a199d6a9f2c"
 
 INITSCRIPT_NAME = "rc.pvr"
 INITSCRIPT_PARAMS = "defaults 8"
+SYSTEMD_SERVICE:${PN} = "pvrsrvctl.service"
 
+# Prefer udev rules over everything, but we do have init services if necessary
 PACKAGECONFIG ??= "udev"
-PACKAGECONFIG[udev] = "UDEV=true,,,udev"
+PACKAGECONFIG[udev] = "UDEV=true,UDEV=false,,udev,,sysvinit systemd"
+PACKAGECONFIG[systemd] = "SYSTEMD=true,SYSTEMD=false,,,,udev sysvinit"
+PACKAGECONFIG[sysvinit] = ",,,,,udev systemd"
 
-def use_sysvinit(d):
-    return d.getVar('VIRTUAL-RUNTIME_init_manager') == 'sysvinit'
+def pick_init(d):
+    packageconfig = d.getVar('PACKAGECONFIG').split()
+    if 'udev' not in packageconfig:
+        if d.getVar('VIRTUAL-RUNTIME_init_manager') == 'sysvinit':
+            return "update-rc.d"
+        return "systemd"
+    return ""
 
-inherit ${@oe.utils.ifelse(use_sysvinit(d), 'update-rc.d', '')}
+inherit ${@pick_init(d)}
 
 TARGET_PRODUCT:ti33x = "ti335x_linux"
 TARGET_PRODUCT:ti43x = "ti437x_linux"
@@ -39,6 +48,8 @@ S = "${WORKDIR}/git"
 
 EXTRA_OEMAKE += "DESTDIR=${D} TARGET_PRODUCT=${TARGET_PRODUCT} ${PACKAGECONFIG_CONFARGS}"
 
+do_configure[noexec] = "1"
+do_compile[noexec] = "1"
 do_install() {
     oe_runmake install
 }

meta-ti-bsp/recipes-kernel/linux/ffa-debugfs/ffa-debugfs-mod_%.bbappend

@@ -1,5 +0,0 @@
-# Added my meta-arm, this needs ceetain backports in 5.10
-# Disable until kernel upgrades to newer than 5.10 where it
-# is already upstreamed
-# Revisit when kernel is upgraded to 5.15 or newer e.g.
-COMPATIBLE_HOST:ti-soc = "null"

meta-ti-bsp/recipes-kernel/linux/files/0001-ata-ahci-fix-enum-constants-for-gcc-13.patch

@@ -1,351 +0,0 @@
-From f07788079f515ca4a681c5f595bdad19cfbd7b1d Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Sat, 3 Dec 2022 11:54:25 +0100
-Subject: [PATCH] ata: ahci: fix enum constants for gcc-13
-
-gcc-13 slightly changes the type of constant expressions that are defined
-in an enum, which triggers a compile time sanity check in libata:
-
-linux/drivers/ata/libahci.c: In function 'ahci_led_store':
-linux/include/linux/compiler_types.h:357:45: error: call to '__compiletime_assert_302' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long)
-357 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
-
-The new behavior is that sizeof() returns the same value for the
-constant as it does for the enum type, which is generally more sensible
-and consistent.
-
-The problem in libata is that it contains a single enum definition for
-lots of unrelated constants, some of which are large positive (unsigned)
-integers like 0xffffffff, while others like (1<<31) are interpreted as
-negative integers, and this forces the enum type to become 64 bit wide
-even though most constants would still fit into a signed 32-bit 'int'.
-
-Fix this by changing the entire enum definition to use BIT(x) in place
-of (1<<x), which results in all values being seen as 'unsigned' and
-fitting into an unsigned 32-bit type.
-
-Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107917
-Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107405
-Reported-by: Luis Machado <luis.machado@arm.com>
-Cc: linux-ide@vger.kernel.org
-Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
-Cc: stable@vger.kernel.org
-Cc: Randy Dunlap <rdunlap@infradead.org>
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Tested-by: Luis Machado <luis.machado@arm.com>
-Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
----
- drivers/ata/ahci.h | 245 +++++++++++++++++++++++----------------------
- 1 file changed, 123 insertions(+), 122 deletions(-)
-
---- a/drivers/ata/ahci.h
-+++ b/drivers/ata/ahci.h
-@@ -24,6 +24,7 @@
- #include <linux/libata.h>
- #include <linux/phy/phy.h>
- #include <linux/regulator/consumer.h>
-+#include <linux/bits.h>
-
- /* Enclosure Management Control */
- #define EM_CTRL_MSG_TYPE              0x000f0000
-@@ -54,12 +55,12 @@ enum {
-	AHCI_PORT_PRIV_FBS_DMA_SZ	= AHCI_CMD_SLOT_SZ +
-					  AHCI_CMD_TBL_AR_SZ +
-					  (AHCI_RX_FIS_SZ * 16),
--	AHCI_IRQ_ON_SG		= (1 << 31),
--	AHCI_CMD_ATAPI		= (1 << 5),
--	AHCI_CMD_WRITE		= (1 << 6),
--	AHCI_CMD_PREFETCH	= (1 << 7),
--	AHCI_CMD_RESET		= (1 << 8),
--	AHCI_CMD_CLR_BUSY	= (1 << 10),
-+	AHCI_IRQ_ON_SG		= BIT(31),
-+	AHCI_CMD_ATAPI		= BIT(5),
-+	AHCI_CMD_WRITE		= BIT(6),
-+	AHCI_CMD_PREFETCH	= BIT(7),
-+	AHCI_CMD_RESET		= BIT(8),
-+	AHCI_CMD_CLR_BUSY	= BIT(10),
-
-	RX_FIS_PIO_SETUP	= 0x20,	/* offset of PIO Setup FIS data */
-	RX_FIS_D2H_REG		= 0x40,	/* offset of D2H Register FIS data */
-@@ -77,37 +78,37 @@ enum {
-	HOST_CAP2		= 0x24, /* host capabilities, extended */
-
-	/* HOST_CTL bits */
--	HOST_RESET		= (1 << 0),  /* reset controller; self-clear */
--	HOST_IRQ_EN		= (1 << 1),  /* global IRQ enable */
--	HOST_MRSM		= (1 << 2),  /* MSI Revert to Single Message */
--	HOST_AHCI_EN		= (1 << 31), /* AHCI enabled */
-+	HOST_RESET		= BIT(0),  /* reset controller; self-clear */
-+	HOST_IRQ_EN		= BIT(1),  /* global IRQ enable */
-+	HOST_MRSM		= BIT(2),  /* MSI Revert to Single Message */
-+	HOST_AHCI_EN		= BIT(31), /* AHCI enabled */
-
-	/* HOST_CAP bits */
--	HOST_CAP_SXS		= (1 << 5),  /* Supports External SATA */
--	HOST_CAP_EMS		= (1 << 6),  /* Enclosure Management support */
--	HOST_CAP_CCC		= (1 << 7),  /* Command Completion Coalescing */
--	HOST_CAP_PART		= (1 << 13), /* Partial state capable */
--	HOST_CAP_SSC		= (1 << 14), /* Slumber state capable */
--	HOST_CAP_PIO_MULTI	= (1 << 15), /* PIO multiple DRQ support */
--	HOST_CAP_FBS		= (1 << 16), /* FIS-based switching support */
--	HOST_CAP_PMP		= (1 << 17), /* Port Multiplier support */
--	HOST_CAP_ONLY		= (1 << 18), /* Supports AHCI mode only */
--	HOST_CAP_CLO		= (1 << 24), /* Command List Override support */
--	HOST_CAP_LED		= (1 << 25), /* Supports activity LED */
--	HOST_CAP_ALPM		= (1 << 26), /* Aggressive Link PM support */
--	HOST_CAP_SSS		= (1 << 27), /* Staggered Spin-up */
--	HOST_CAP_MPS		= (1 << 28), /* Mechanical presence switch */
--	HOST_CAP_SNTF		= (1 << 29), /* SNotification register */
--	HOST_CAP_NCQ		= (1 << 30), /* Native Command Queueing */
--	HOST_CAP_64		= (1 << 31), /* PCI DAC (64-bit DMA) support */
-+	HOST_CAP_SXS		= BIT(5),  /* Supports External SATA */
-+	HOST_CAP_EMS		= BIT(6),  /* Enclosure Management support */
-+	HOST_CAP_CCC		= BIT(7),  /* Command Completion Coalescing */
-+	HOST_CAP_PART		= BIT(13), /* Partial state capable */
-+	HOST_CAP_SSC		= BIT(14), /* Slumber state capable */
-+	HOST_CAP_PIO_MULTI	= BIT(15), /* PIO multiple DRQ support */
-+	HOST_CAP_FBS		= BIT(16), /* FIS-based switching support */
-+	HOST_CAP_PMP		= BIT(17), /* Port Multiplier support */
-+	HOST_CAP_ONLY		= BIT(18), /* Supports AHCI mode only */
-+	HOST_CAP_CLO		= BIT(24), /* Command List Override support */
-+	HOST_CAP_LED		= BIT(25), /* Supports activity LED */
-+	HOST_CAP_ALPM		= BIT(26), /* Aggressive Link PM support */
-+	HOST_CAP_SSS		= BIT(27), /* Staggered Spin-up */
-+	HOST_CAP_MPS		= BIT(28), /* Mechanical presence switch */
-+	HOST_CAP_SNTF		= BIT(29), /* SNotification register */
-+	HOST_CAP_NCQ		= BIT(30), /* Native Command Queueing */
-+	HOST_CAP_64		= BIT(31), /* PCI DAC (64-bit DMA) support */
-
-	/* HOST_CAP2 bits */
--	HOST_CAP2_BOH		= (1 << 0),  /* BIOS/OS handoff supported */
--	HOST_CAP2_NVMHCI	= (1 << 1),  /* NVMHCI supported */
--	HOST_CAP2_APST		= (1 << 2),  /* Automatic partial to slumber */
--	HOST_CAP2_SDS		= (1 << 3),  /* Support device sleep */
--	HOST_CAP2_SADM		= (1 << 4),  /* Support aggressive DevSlp */
--	HOST_CAP2_DESO		= (1 << 5),  /* DevSlp from slumber only */
-+	HOST_CAP2_BOH		= BIT(0),  /* BIOS/OS handoff supported */
-+	HOST_CAP2_NVMHCI	= BIT(1),  /* NVMHCI supported */
-+	HOST_CAP2_APST		= BIT(2),  /* Automatic partial to slumber */
-+	HOST_CAP2_SDS		= BIT(3),  /* Support device sleep */
-+	HOST_CAP2_SADM		= BIT(4),  /* Support aggressive DevSlp */
-+	HOST_CAP2_DESO		= BIT(5),  /* DevSlp from slumber only */
-
-	/* registers for each SATA port */
-	PORT_LST_ADDR		= 0x00, /* command list DMA addr */
-@@ -129,24 +130,24 @@ enum {
-	PORT_DEVSLP		= 0x44, /* device sleep */
-
-	/* PORT_IRQ_{STAT,MASK} bits */
--	PORT_IRQ_COLD_PRES	= (1 << 31), /* cold presence detect */
--	PORT_IRQ_TF_ERR		= (1 << 30), /* task file error */
--	PORT_IRQ_HBUS_ERR	= (1 << 29), /* host bus fatal error */
--	PORT_IRQ_HBUS_DATA_ERR	= (1 << 28), /* host bus data error */
--	PORT_IRQ_IF_ERR		= (1 << 27), /* interface fatal error */
--	PORT_IRQ_IF_NONFATAL	= (1 << 26), /* interface non-fatal error */
--	PORT_IRQ_OVERFLOW	= (1 << 24), /* xfer exhausted available S/G */
--	PORT_IRQ_BAD_PMP	= (1 << 23), /* incorrect port multiplier */
--
--	PORT_IRQ_PHYRDY		= (1 << 22), /* PhyRdy changed */
--	PORT_IRQ_DEV_ILCK	= (1 << 7), /* device interlock */
--	PORT_IRQ_CONNECT	= (1 << 6), /* port connect change status */
--	PORT_IRQ_SG_DONE	= (1 << 5), /* descriptor processed */
--	PORT_IRQ_UNK_FIS	= (1 << 4), /* unknown FIS rx'd */
--	PORT_IRQ_SDB_FIS	= (1 << 3), /* Set Device Bits FIS rx'd */
--	PORT_IRQ_DMAS_FIS	= (1 << 2), /* DMA Setup FIS rx'd */
--	PORT_IRQ_PIOS_FIS	= (1 << 1), /* PIO Setup FIS rx'd */
--	PORT_IRQ_D2H_REG_FIS	= (1 << 0), /* D2H Register FIS rx'd */
-+	PORT_IRQ_COLD_PRES	= BIT(31), /* cold presence detect */
-+	PORT_IRQ_TF_ERR		= BIT(30), /* task file error */
-+	PORT_IRQ_HBUS_ERR	= BIT(29), /* host bus fatal error */
-+	PORT_IRQ_HBUS_DATA_ERR	= BIT(28), /* host bus data error */
-+	PORT_IRQ_IF_ERR		= BIT(27), /* interface fatal error */
-+	PORT_IRQ_IF_NONFATAL	= BIT(26), /* interface non-fatal error */
-+	PORT_IRQ_OVERFLOW	= BIT(24), /* xfer exhausted available S/G */
-+	PORT_IRQ_BAD_PMP	= BIT(23), /* incorrect port multiplier */
-+
-+	PORT_IRQ_PHYRDY		= BIT(22), /* PhyRdy changed */
-+	PORT_IRQ_DEV_ILCK	= BIT(7), /* device interlock */
-+	PORT_IRQ_CONNECT	= BIT(6), /* port connect change status */
-+	PORT_IRQ_SG_DONE	= BIT(5), /* descriptor processed */
-+	PORT_IRQ_UNK_FIS	= BIT(4), /* unknown FIS rx'd */
-+	PORT_IRQ_SDB_FIS	= BIT(3), /* Set Device Bits FIS rx'd */
-+	PORT_IRQ_DMAS_FIS	= BIT(2), /* DMA Setup FIS rx'd */
-+	PORT_IRQ_PIOS_FIS	= BIT(1), /* PIO Setup FIS rx'd */
-+	PORT_IRQ_D2H_REG_FIS	= BIT(0), /* D2H Register FIS rx'd */
-
-	PORT_IRQ_FREEZE		= PORT_IRQ_HBUS_ERR |
-				  PORT_IRQ_IF_ERR |
-@@ -162,34 +163,34 @@ enum {
-				  PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
-
-	/* PORT_CMD bits */
--	PORT_CMD_ASP		= (1 << 27), /* Aggressive Slumber/Partial */
--	PORT_CMD_ALPE		= (1 << 26), /* Aggressive Link PM enable */
--	PORT_CMD_ATAPI		= (1 << 24), /* Device is ATAPI */
--	PORT_CMD_FBSCP		= (1 << 22), /* FBS Capable Port */
--	PORT_CMD_ESP		= (1 << 21), /* External Sata Port */
--	PORT_CMD_HPCP		= (1 << 18), /* HotPlug Capable Port */
--	PORT_CMD_PMP		= (1 << 17), /* PMP attached */
--	PORT_CMD_LIST_ON	= (1 << 15), /* cmd list DMA engine running */
--	PORT_CMD_FIS_ON		= (1 << 14), /* FIS DMA engine running */
--	PORT_CMD_FIS_RX		= (1 << 4), /* Enable FIS receive DMA engine */
--	PORT_CMD_CLO		= (1 << 3), /* Command list override */
--	PORT_CMD_POWER_ON	= (1 << 2), /* Power up device */
--	PORT_CMD_SPIN_UP	= (1 << 1), /* Spin up device */
--	PORT_CMD_START		= (1 << 0), /* Enable port DMA engine */
--
--	PORT_CMD_ICC_MASK	= (0xf << 28), /* i/f ICC state mask */
--	PORT_CMD_ICC_ACTIVE	= (0x1 << 28), /* Put i/f in active state */
--	PORT_CMD_ICC_PARTIAL	= (0x2 << 28), /* Put i/f in partial state */
--	PORT_CMD_ICC_SLUMBER	= (0x6 << 28), /* Put i/f in slumber state */
-+	PORT_CMD_ASP		= BIT(27), /* Aggressive Slumber/Partial */
-+	PORT_CMD_ALPE		= BIT(26), /* Aggressive Link PM enable */
-+	PORT_CMD_ATAPI		= BIT(24), /* Device is ATAPI */
-+	PORT_CMD_FBSCP		= BIT(22), /* FBS Capable Port */
-+	PORT_CMD_ESP		= BIT(21), /* External Sata Port */
-+	PORT_CMD_HPCP		= BIT(18), /* HotPlug Capable Port */
-+	PORT_CMD_PMP		= BIT(17), /* PMP attached */
-+	PORT_CMD_LIST_ON	= BIT(15), /* cmd list DMA engine running */
-+	PORT_CMD_FIS_ON		= BIT(14), /* FIS DMA engine running */
-+	PORT_CMD_FIS_RX		= BIT(4), /* Enable FIS receive DMA engine */
-+	PORT_CMD_CLO		= BIT(3), /* Command list override */
-+	PORT_CMD_POWER_ON	= BIT(2), /* Power up device */
-+	PORT_CMD_SPIN_UP	= BIT(1), /* Spin up device */
-+	PORT_CMD_START		= BIT(0), /* Enable port DMA engine */
-+
-+	PORT_CMD_ICC_MASK	= (0xfu << 28), /* i/f ICC state mask */
-+	PORT_CMD_ICC_ACTIVE	= (0x1u << 28), /* Put i/f in active state */
-+	PORT_CMD_ICC_PARTIAL	= (0x2u << 28), /* Put i/f in partial state */
-+	PORT_CMD_ICC_SLUMBER	= (0x6u << 28), /* Put i/f in slumber state */
-
-	/* PORT_FBS bits */
-	PORT_FBS_DWE_OFFSET	= 16, /* FBS device with error offset */
-	PORT_FBS_ADO_OFFSET	= 12, /* FBS active dev optimization offset */
-	PORT_FBS_DEV_OFFSET	= 8,  /* FBS device to issue offset */
-	PORT_FBS_DEV_MASK	= (0xf << PORT_FBS_DEV_OFFSET),  /* FBS.DEV */
--	PORT_FBS_SDE		= (1 << 2), /* FBS single device error */
--	PORT_FBS_DEC		= (1 << 1), /* FBS device error clear */
--	PORT_FBS_EN		= (1 << 0), /* Enable FBS */
-+	PORT_FBS_SDE		= BIT(2), /* FBS single device error */
-+	PORT_FBS_DEC		= BIT(1), /* FBS device error clear */
-+	PORT_FBS_EN		= BIT(0), /* Enable FBS */
-
-	/* PORT_DEVSLP bits */
-	PORT_DEVSLP_DM_OFFSET	= 25,             /* DITO multiplier offset */
-@@ -197,52 +198,52 @@ enum {
-	PORT_DEVSLP_DITO_OFFSET	= 15,             /* DITO offset */
-	PORT_DEVSLP_MDAT_OFFSET	= 10,             /* Minimum assertion time */
-	PORT_DEVSLP_DETO_OFFSET	= 2,              /* DevSlp exit timeout */
--	PORT_DEVSLP_DSP		= (1 << 1),       /* DevSlp present */
--	PORT_DEVSLP_ADSE	= (1 << 0),       /* Aggressive DevSlp enable */
-+	PORT_DEVSLP_DSP		= BIT(1),       /* DevSlp present */
-+	PORT_DEVSLP_ADSE	= BIT(0),       /* Aggressive DevSlp enable */
-
-	/* hpriv->flags bits */
-
- #define AHCI_HFLAGS(flags)		.private_data	= (void *)(flags)
-
--	AHCI_HFLAG_NO_NCQ		= (1 << 0),
--	AHCI_HFLAG_IGN_IRQ_IF_ERR	= (1 << 1), /* ignore IRQ_IF_ERR */
--	AHCI_HFLAG_IGN_SERR_INTERNAL	= (1 << 2), /* ignore SERR_INTERNAL */
--	AHCI_HFLAG_32BIT_ONLY		= (1 << 3), /* force 32bit */
--	AHCI_HFLAG_MV_PATA		= (1 << 4), /* PATA port */
--	AHCI_HFLAG_NO_MSI		= (1 << 5), /* no PCI MSI */
--	AHCI_HFLAG_NO_PMP		= (1 << 6), /* no PMP */
--	AHCI_HFLAG_SECT255		= (1 << 8), /* max 255 sectors */
--	AHCI_HFLAG_YES_NCQ		= (1 << 9), /* force NCQ cap on */
--	AHCI_HFLAG_NO_SUSPEND		= (1 << 10), /* don't suspend */
--	AHCI_HFLAG_SRST_TOUT_IS_OFFLINE	= (1 << 11), /* treat SRST timeout as
-+	AHCI_HFLAG_NO_NCQ		= BIT(0),
-+	AHCI_HFLAG_IGN_IRQ_IF_ERR	= BIT(1), /* ignore IRQ_IF_ERR */
-+	AHCI_HFLAG_IGN_SERR_INTERNAL	= BIT(2), /* ignore SERR_INTERNAL */
-+	AHCI_HFLAG_32BIT_ONLY		= BIT(3), /* force 32bit */
-+	AHCI_HFLAG_MV_PATA		= BIT(4), /* PATA port */
-+	AHCI_HFLAG_NO_MSI		= BIT(5), /* no PCI MSI */
-+	AHCI_HFLAG_NO_PMP		= BIT(6), /* no PMP */
-+	AHCI_HFLAG_SECT255		= BIT(8), /* max 255 sectors */
-+	AHCI_HFLAG_YES_NCQ		= BIT(9), /* force NCQ cap on */
-+	AHCI_HFLAG_NO_SUSPEND		= BIT(10), /* don't suspend */
-+	AHCI_HFLAG_SRST_TOUT_IS_OFFLINE	= BIT(11), /* treat SRST timeout as
-							link offline */
--	AHCI_HFLAG_NO_SNTF		= (1 << 12), /* no sntf */
--	AHCI_HFLAG_NO_FPDMA_AA		= (1 << 13), /* no FPDMA AA */
--	AHCI_HFLAG_YES_FBS		= (1 << 14), /* force FBS cap on */
--	AHCI_HFLAG_DELAY_ENGINE		= (1 << 15), /* do not start engine on
-+	AHCI_HFLAG_NO_SNTF		= BIT(12), /* no sntf */
-+	AHCI_HFLAG_NO_FPDMA_AA		= BIT(13), /* no FPDMA AA */
-+	AHCI_HFLAG_YES_FBS		= BIT(14), /* force FBS cap on */
-+	AHCI_HFLAG_DELAY_ENGINE		= BIT(15), /* do not start engine on
-						        port start (wait until
-						        error-handling stage) */
--	AHCI_HFLAG_NO_DEVSLP		= (1 << 17), /* no device sleep */
--	AHCI_HFLAG_NO_FBS		= (1 << 18), /* no FBS */
-+	AHCI_HFLAG_NO_DEVSLP		= BIT(17), /* no device sleep */
-+	AHCI_HFLAG_NO_FBS		= BIT(18), /* no FBS */
-
- #ifdef CONFIG_PCI_MSI
--	AHCI_HFLAG_MULTI_MSI		= (1 << 20), /* per-port MSI(-X) */
-+	AHCI_HFLAG_MULTI_MSI		= BIT(20), /* per-port MSI(-X) */
- #else
-	/* compile out MSI infrastructure */
-	AHCI_HFLAG_MULTI_MSI		= 0,
- #endif
--	AHCI_HFLAG_WAKE_BEFORE_STOP	= (1 << 22), /* wake before DMA stop */
--	AHCI_HFLAG_YES_ALPM		= (1 << 23), /* force ALPM cap on */
--	AHCI_HFLAG_NO_WRITE_TO_RO	= (1 << 24), /* don't write to read
-+	AHCI_HFLAG_WAKE_BEFORE_STOP	= BIT(22), /* wake before DMA stop */
-+	AHCI_HFLAG_YES_ALPM		= BIT(23), /* force ALPM cap on */
-+	AHCI_HFLAG_NO_WRITE_TO_RO	= BIT(24), /* don't write to read
-							only registers */
--	AHCI_HFLAG_IS_MOBILE		= (1 << 25), /* mobile chipset, use
-+	AHCI_HFLAG_IS_MOBILE		= BIT(25), /* mobile chipset, use
-							SATA_MOBILE_LPM_POLICY
-							as default lpm_policy */
--	AHCI_HFLAG_SUSPEND_PHYS		= (1 << 26), /* handle PHYs during
-+	AHCI_HFLAG_SUSPEND_PHYS		= BIT(26), /* handle PHYs during
-							suspend/resume */
--	AHCI_HFLAG_IGN_NOTSUPP_POWER_ON	= (1 << 27), /* ignore -EOPNOTSUPP
-+	AHCI_HFLAG_IGN_NOTSUPP_POWER_ON	= BIT(27), /* ignore -EOPNOTSUPP
-							from phy_power_on() */
--	AHCI_HFLAG_NO_SXS		= (1 << 28), /* SXS not supported */
-+	AHCI_HFLAG_NO_SXS		= BIT(28), /* SXS not supported */
-
-	/* ap->flags bits */
-
-@@ -258,22 +259,22 @@ enum {
-	EM_MAX_RETRY			= 5,
-
-	/* em_ctl bits */
--	EM_CTL_RST		= (1 << 9), /* Reset */
--	EM_CTL_TM		= (1 << 8), /* Transmit Message */
--	EM_CTL_MR		= (1 << 0), /* Message Received */
--	EM_CTL_ALHD		= (1 << 26), /* Activity LED */
--	EM_CTL_XMT		= (1 << 25), /* Transmit Only */
--	EM_CTL_SMB		= (1 << 24), /* Single Message Buffer */
--	EM_CTL_SGPIO		= (1 << 19), /* SGPIO messages supported */
--	EM_CTL_SES		= (1 << 18), /* SES-2 messages supported */
--	EM_CTL_SAFTE		= (1 << 17), /* SAF-TE messages supported */
--	EM_CTL_LED		= (1 << 16), /* LED messages supported */
-+	EM_CTL_RST		= BIT(9), /* Reset */
-+	EM_CTL_TM		= BIT(8), /* Transmit Message */
-+	EM_CTL_MR		= BIT(0), /* Message Received */
-+	EM_CTL_ALHD		= BIT(26), /* Activity LED */
-+	EM_CTL_XMT		= BIT(25), /* Transmit Only */
-+	EM_CTL_SMB		= BIT(24), /* Single Message Buffer */
-+	EM_CTL_SGPIO		= BIT(19), /* SGPIO messages supported */
-+	EM_CTL_SES		= BIT(18), /* SES-2 messages supported */
-+	EM_CTL_SAFTE		= BIT(17), /* SAF-TE messages supported */
-+	EM_CTL_LED		= BIT(16), /* LED messages supported */
-
-	/* em message type */
--	EM_MSG_TYPE_LED		= (1 << 0), /* LED */
--	EM_MSG_TYPE_SAFTE	= (1 << 1), /* SAF-TE */
--	EM_MSG_TYPE_SES2	= (1 << 2), /* SES-2 */
--	EM_MSG_TYPE_SGPIO	= (1 << 3), /* SGPIO */
-+	EM_MSG_TYPE_LED		= BIT(0), /* LED */
-+	EM_MSG_TYPE_SAFTE	= BIT(1), /* SAF-TE */
-+	EM_MSG_TYPE_SES2	= BIT(2), /* SES-2 */
-+	EM_MSG_TYPE_SGPIO	= BIT(3), /* SGPIO */
- };
-
- struct ahci_cmd_hdr {

meta-ti-bsp/recipes-kernel/linux/linux-bb.org_git.bb

@@ -10,24 +10,21 @@ inherit kernel
 require recipes-kernel/linux/setup-defconfig.inc
 require recipes-kernel/linux/ti-kernel.inc
 
-# BB.org hasn't switched to "vendored" DTB layout by default yet
-KERNEL_DTBVENDORED = "0"
-
 DEPENDS += "gmp-native libmpc-native"
 
 KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT} ${EXTRA_DTC_ARGS}"
 
 S = "${WORKDIR}/git"
 
-# 6.1.33 version for 32-bit
-SRCREV:armv7a = "feb1c153a9693d44dec5772d134bd2c7986ff95d"
-PV:armv7a = "6.1.33+git${SRCPV}"
-BRANCH:armv7a = "v6.1.33-ti-r7"
+# 6.1.80 version for 32-bit
+SRCREV:armv7a = "4ca9ea30768d58c8d4d56d03dd1eaf8c8feb7ef9"
+PV:armv7a = "6.1.80+git${SRCPV}"
+BRANCH:armv7a = "v6.1.80-ti-r34"
 
-# 6.1.46 version for 64-bit
-SRCREV:aarch64 = "0a1e93a38c699fdd3c629d57f5cd015f90ab0d36"
-PV:aarch64 = "6.1.46+git${SRCPV}"
-BRANCH:aarch64 = "v6.1.46-ti-arm64-r9"
+# 6.1.80 version for 64-bit
+SRCREV:aarch64 = "977c75e082620f15c06c72bcced30f787c14b390"
+PV:aarch64 = "6.1.80+git${SRCPV}"
+BRANCH:aarch64 = "v6.1.80-ti-arm64-r49"
 
 SRC_URI = " \
     git://github.com/beagleboard/linux.git;protocol=https;branch=${BRANCH} \

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-5.10/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_omap2_release

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-5.10/dra7xx/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_dra7x_release

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-5.10/k3/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_arm64_release

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-5.10/omapl138/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_omapl138_release

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-5.10/ti33x/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_am3x_release

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-5.10/ti43x/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_am4x_release

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-rt-5.10/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_omap2_rt_release

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-rt-5.10/dra7xx/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_dra7x_rt_release

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-rt-5.10/k3/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_arm64_rt_release

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-rt-5.10/ti33x/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_am3x_rt_release

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-rt-5.10/ti43x/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_am4x_rt_release

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-rt_5.10.bb

@@ -1,10 +0,0 @@
-require linux-ti-staging_5.10.bb
-
-# Look in the generic major.minor directory for files
-# This will have priority over generic non-rt path
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}-5.10:"
-
-BRANCH = "ti-rt-linux-5.10.y"
-
-SRCREV = "101d44260b8dfbab27763581e4bbd534dd36ae33"
-PV = "5.10.168+git${SRCPV}"

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-rt_6.1.bb

@@ -1,10 +1,15 @@
 require linux-ti-staging_6.1.bb
 
+KERNEL_LOCALVERSION:append = "-rt"
+
 # Look in the generic major.minor directory for files
 # This will have priority over generic non-rt path
 FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}-6.1:"
 
 BRANCH = "ti-rt-linux-6.1.y"
 
-SRCREV = "eda9974e8513cdd2c5cc20c3c6b851f9977acd4d"
-PV = "6.1.46+git${SRCPV}"
+SRCREV = "9e8992fb839c642e3c20ee8ce69a30dbaae7f498"
+
+include ${@ 'recipes-kernel/linux/ti-extras-rt.inc' if d.getVar('TI_EXTRAS') else ''}
+
+PV = "6.1.119+git${SRCPV}"

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-systest-5.10/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_omap2_debug

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-systest-5.10/dra7xx/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_dra7x_debug

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-systest-5.10/k3/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_arm64_debug

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-systest-5.10/omapl138/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_omapl138_debug

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-systest-5.10/ti33x/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_am3x_debug

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-systest-5.10/ti43x/defconfig

@@ -1 +0,0 @@
-use-tisdk-config=ti_sdk_am4x_debug

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging-systest_5.10.bb

@@ -1,5 +0,0 @@
-require linux-ti-staging_5.10.bb
-
-# Look in the generic major.minor directory for files
-# This will have priority over generic non-rt path
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}-5.10:"

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging_5.10.bb

@@ -1,47 +0,0 @@
-SECTION = "kernel"
-SUMMARY = "Linux kernel for TI devices"
-LICENSE = "GPL-2.0-only"
-LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
-
-KERNEL_CLASSES += "${@bb.utils.contains('TFA_PLATFORM', 'k3', 'kernel-fitimage-ti-u-boot', '', d)}"
-
-inherit kernel
-
-DEFCONFIG_BUILDER = "${S}/ti_config_fragments/defconfig_builder.sh"
-require recipes-kernel/linux/setup-defconfig.inc
-require recipes-kernel/linux/ti-kernel.inc
-include ${@ 'recipes-kernel/linux/ti-kernel-devicetree-prefix.inc' if d.getVar('KERNEL_DEVICETREE_PREFIX') else ''}
-
-DEPENDS += "gmp-native libmpc-native"
-
-# Look in the generic major.minor directory for files
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}-5.10:"
-
-KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT} \
-		      ${EXTRA_DTC_ARGS}"
-
-S = "${WORKDIR}/git"
-
-BRANCH = "ti-linux-5.10.y"
-
-SRCREV = "991c5ce91e43cb620f534dc9fe7b0ad21f4f4388"
-PV = "5.10.168+git${SRCPV}"
-
-# Append to the MACHINE_KERNEL_PR so that a new SRCREV will cause a rebuild
-MACHINE_KERNEL_PR:append = "b"
-PR = "${MACHINE_KERNEL_PR}"
-
-KERNEL_GIT_URI = "git://git.ti.com/git/ti-linux-kernel/ti-linux-kernel.git"
-KERNEL_GIT_PROTOCOL = "https"
-SRC_URI += "${KERNEL_GIT_URI};protocol=${KERNEL_GIT_PROTOCOL};branch=${BRANCH} \
-            file://0001-ata-ahci-fix-enum-constants-for-gcc-13.patch \
-            file://defconfig"
-
-FILES:${KERNEL_PACKAGE_NAME}-devicetree += "/${KERNEL_IMAGEDEST}/*.itb"
-
-# Special configuration for remoteproc/rpmsg IPC modules
-module_conf_rpmsg_client_sample = "blacklist rpmsg_client_sample"
-module_conf_ti_k3_r5_remoteproc = "softdep ti_k3_r5_remoteproc pre: virtio_rpmsg_bus"
-module_conf_ti_k3_dsp_remoteproc = "softdep ti_k3_dsp_remoteproc pre: virtio_rpmsg_bus"
-KERNEL_MODULE_PROBECONF += "rpmsg_client_sample ti_k3_r5_remoteproc ti_k3_dsp_remoteproc"
-KERNEL_MODULE_AUTOLOAD:append:j721e = " rpmsg_kdrv_switch"

meta-ti-bsp/recipes-kernel/linux/linux-ti-staging_6.1.bb

@@ -23,8 +23,8 @@ S = "${WORKDIR}/git"
 
 BRANCH ?= "ti-linux-6.1.y"
 
-SRCREV ?= "7d494fe58c8e5d41a6bd886c9a628a7fff5763f9"
-PV = "6.1.46+git${SRCPV}"
+SRCREV ?= "e4e8b16e66f592749984b2d287e0479e93ef35b3"
+PV = "6.1.119+git${SRCPV}"
 
 # Append to the MACHINE_KERNEL_PR so that a new SRCREV will cause a rebuild
 MACHINE_KERNEL_PR:append = "b"

meta-ti-bsp/recipes-kernel/linux/setup-defconfig.inc

@@ -1,6 +1,4 @@
-# KERNEL_LOCALVERSION can be set to add a tag to the end of the
-# kernel version string.  such as the commit id
-KERNEL_LOCALVERSION = "-g${@d.getVar('SRCPV', True).replace('AUTOINC+','')[:10]}"
+KERNEL_LOCALVERSION = "-ti"
 
 # Check the defconfig file and see if it points to an in kernel
 # defconfig that should be used, or if it is a complete config file
@@ -13,8 +11,10 @@ do_configure() {
     # tree config
     cp ${WORKDIR}/defconfig ${B}/.config
 
-    echo ${KERNEL_LOCALVERSION} > ${B}/.scmversion
-    echo ${KERNEL_LOCALVERSION} > ${S}/.scmversion
+    scm_version=$(printf '%s%s' -g $(git -C ${S} rev-parse --verify HEAD 2>/dev/null | cut -c1-12))
+
+    echo ${scm_version} > ${B}/.scmversion
+    echo ${scm_version} > ${S}/.scmversion
 
     # Zero, when using "tisdk" configs, pass control to defconfig_builder
     config=`cat ${B}/.config | grep use-tisdk-config | cut -d= -f2`

meta-ti-bsp/recipes-kernel/linux/ti-extras-rt.inc

@@ -0,0 +1,11 @@
+
+# Use different commit, repo and branch for TI extras build
+# This will have priority over generic rt path
+
+COMPATIBLE_MACHINE = "am62xx|am62pxx"
+
+BRANCH = "ti-rt-linux-6.1.y"
+BRANCH:tie-jailhouse = "ti-rt-linux-6.1.y-jailhouse"
+
+SRCREV = "685e77152461bd6b791500f717bec62d17c1b36d"
+SRCREV:tie-jailhouse = "a74088b40b4d27478a2af5c20cdc0b4ec8ed9470"

meta-ti-bsp/recipes-kernel/linux/ti-extras.inc

@@ -2,13 +2,13 @@
 # Use different commit, repo and branch for TI extras build
 # This will have priority over generic rt path
 
-COMPATIBLE_MACHINE = "am62xx"
+COMPATIBLE_MACHINE = "am62xx|am62pxx"
 
 BRANCH = "ti-linux-6.1.y"
 BRANCH:tie-jailhouse = "ti-linux-6.1.y-jailhouse"
 
-SRCREV = "30bcc25e7cb1b25667db88d61828728f0f0b5f4b"
-SRCREV:tie-jailhouse = "0ed0dec2462b805b0188fe080895adc437871549"
+SRCREV = "ec058c3ddc5377c629e988a95ef84826b14a3307"
+SRCREV:tie-jailhouse = "d035e0cc72399f1c087a63c4210d29e79a7a66e4"
 
 KERNEL_GIT_URI = "git://git.ti.com/git/processor-sdk/linux.git"
 

meta-ti-bsp/recipes-security/optee/optee-client-ti-overrides.inc

@@ -1,6 +1,3 @@
-PV = "4.0.0+git${SRCPV}"
-SRCREV = "acb0885c117e73cb6c5c9b1dd9054cb3f93507ee"
-
 inherit pkgconfig
 DEPENDS += "util-linux"
 

meta-ti-bsp/recipes-security/optee/optee-client-ti-version.inc

@@ -0,0 +1,2 @@
+PV = "4.1.0+git${SRCPV}"
+SRCREV = "f7e4ced15d1fefd073bbfc484fe0e1f74afe96c2"

meta-ti-bsp/recipes-security/optee/optee-client_3.16%.bbappend

@@ -1,4 +1,9 @@
-OPTEE_TI = ""
-OPTEE_TI:ti-soc = "${BPN}-ti.inc"
+OPTEE_TI_VERSION = ""
+OPTEE_TI_VERSION:ti-soc = "${BPN}-ti-version.inc"
 
-require ${OPTEE_TI}
+require ${OPTEE_TI_VERSION}
+
+OPTEE_TI_OVERRIDES = ""
+OPTEE_TI_OVERRIDES:ti-soc = "${BPN}-ti-overrides.inc"
+
+require ${OPTEE_TI_OVERRIDES}

meta-ti-bsp/recipes-security/optee/optee-examples_%.bbappend

@@ -1,4 +1,4 @@
-OPTEE_TI = ""
-OPTEE_TI:ti-soc = "${BPN}-ti.inc"
+OPTEE_TI_VERSION = ""
+OPTEE_TI_VERSION:ti-soc = "${BPN}-ti-version.inc"
 
-require ${OPTEE_TI}
+require ${OPTEE_TI_VERSION}

meta-ti-bsp/recipes-security/optee/optee-os-tadevkit-ti.inc

@@ -1,3 +0,0 @@
-PV = "4.0.0+git${SRCPV}"
-SRCREV = "2a5b1d1232f582056184367fb58a425ac7478ec6"
-

meta-ti-bsp/recipes-security/optee/optee-os-tadevkit_%.bbappend

@@ -1,4 +1,4 @@
-OPTEE_TI = ""
-OPTEE_TI:ti-soc = "${BPN}-ti.inc"
+OPTEE_TI_VERSION = ""
+OPTEE_TI_VERSION:ti-soc = "optee-os-ti-version.inc"
 
-require ${OPTEE_TI}
+require ${OPTEE_TI_VERSION}

meta-ti-bsp/recipes-security/optee/optee-os-ti-overrides.inc

@@ -1,14 +1,12 @@
-PV = "4.0.0+git${SRCPV}"
-SRCREV = "2a5b1d1232f582056184367fb58a425ac7478ec6"
-
 # Use TI SECDEV for signing
 inherit ti-secdev
 
 EXTRA_OEMAKE:append:k3 = "${@ ' CFG_CONSOLE_UART='+ d.getVar('OPTEE_K3_USART') if d.getVar('OPTEE_K3_USART') else ''}"
 
-EXTRA_OEMAKE:append:am62xx = " CFG_WITH_SOFTWARE_PRNG=y CFG_TEE_CORE_LOG_LEVEL=1"
+EXTRA_OEMAKE:append:am62xx = " CFG_TEE_CORE_LOG_LEVEL=1"
 EXTRA_OEMAKE:append:am62pxx = " CFG_WITH_SOFTWARE_PRNG=y CFG_TEE_CORE_LOG_LEVEL=1"
 EXTRA_OEMAKE:append:am62axx = " CFG_TEE_CORE_LOG_LEVEL=1"
+EXTRA_OEMAKE:append:j722s = " CFG_WITH_SOFTWARE_PRNG=y CFG_TEE_CORE_LOG_LEVEL=1"
 
 do_compile:append:k3() {
     cp ${B}/core/tee-pager_v2.bin ${B}/bl32.bin

meta-ti-bsp/recipes-security/optee/optee-os-ti-version.inc

@@ -0,0 +1,2 @@
+PV = "4.1.0+git${SRCPV}"
+SRCREV = "012cdca49db398693903e05c42a254a3a0c0d8f2"

meta-ti-bsp/recipes-security/optee/optee-os_3.16%.bbappend

@@ -1,4 +1,9 @@
-OPTEE_TI = ""
-OPTEE_TI:ti-soc = "${BPN}-ti.inc"
+OPTEE_TI_VERSION = ""
+OPTEE_TI_VERSION:ti-soc = "${BPN}-ti-version.inc"
 
-require ${OPTEE_TI}
+require ${OPTEE_TI_VERSION}
+
+OPTEE_TI_OVERRIDES = ""
+OPTEE_TI_OVERRIDES:ti-soc = "${BPN}-ti-overrides.inc"
+
+require ${OPTEE_TI_OVERRIDES}

meta-ti-bsp/recipes-security/optee/optee-test-ti-overrides.inc

@@ -1,6 +1,2 @@
-PV = "4.0.0+git${SRCPV}"
-SRCREV = "1c3d6be5eaa6174e3dbabf60928d15628e39b994"
-
 EXTRA_OEMAKE:append = " OPTEE_OPENSSL_EXPORT=${STAGING_INCDIR}"
 DEPENDS:append = " openssl"
-

meta-ti-bsp/recipes-security/optee/optee-test-ti-version.inc

@@ -0,0 +1,2 @@
+PV = "4.1.0+git${SRCPV}"
+SRCREV = "2e1e7a9c9d659585566a75fc8802f4758c42bcb2"