u-boot-ti-staging:_2013.10: Update to pull in critical fixes

* Critical fixes have been added to the ti-u-boot-2013.10 branch for AM4x.
* Update commit id to point to this new commit.
* For all other platforms nothing should have changed.

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

README

@@ -11,12 +11,6 @@ layers: meta
 branch: master
 
 
-When not depending on meta-openembedded and not using systemd, you may need to
-mask few miscellaneous recipes requiring systemd, by adding this to local.conf:
-
-BBMASK = "meta-ti/recipes-misc"
-
-
 The base BSP part of meta-ti should work with different OpenEmbedded/Yocto
 distributions and layer stacks, such as:
 distro-less (only with OE-Core), with Yocto/Poky, with Angstrom or Arago.
@@ -27,4 +21,3 @@ Please follow the recommended setup procedures of your OE distribution.
 Send pull requests, patches, comments or questions to meta-ti@yoctoproject.org
 
 Maintainers: Denys Dmytriyenko <denys@ti.com>
-             Koen Kooi <koen@dominion.thruhere.net>

classes/sdcard_image.bbclass

@@ -1,156 +0,0 @@
-inherit image
-
-# Add the fstypes we need
-IMAGE_FSTYPES_append = " tar.bz2 sdimg"
-
-# Ensure required utilities are present
-IMAGE_DEPENDS_sdimg = "genext2fs-native e2fsprogs-native"
-
-# Change this to match your host distro
-LOSETUP ?= "/sbin/losetup"
-
-# Since these need to go in /etc/fstab we can hardcode them
-# Since the vars are weakly assigned, you can override them from your local.conf
-LOOPDEV ?= "/dev/loop1"
-LOOPDEV_BOOT ?= "/dev/loop2"
-LOOPDEV_FS ?= "/dev/loop3"
-
-# Default to 4GiB images
-SDIMG_SIZE ?= "444" 
-
-# FS type for rootfs
-ROOTFSTYPE ?= "ext4"
-
-BOOTPARTNAME_beaglebone = "BEAGLE_BONE"
-BOOTPARTNAME ?= "${MACHINE}"
-
-IMAGEDATESTAMP = "${@time.strftime('%Y.%m.%d',time.gmtime())}"
-
-# Files and/or directories to be copied into the vfat partition
-FATPAYLOAD ?= ""
-
-IMAGE_CMD_sdimg () {
-	SDIMG=${WORKDIR}/sd.img
-
-	# sanity check fstab entry for boot partition mounting
-	if [ "x$(cat /etc/fstab | grep ${LOOPDEV_BOOT} | grep ${WORKDIR}/tmp-mnt-boot | grep user || true)" = "x" ]; then
-		echo "/etc/fstab entries need to be created with the user flag for the loop devices like:"
-		echo "${LOOPDEV_BOOT} ${WORKDIR}/tmp-mnt-boot vfat user 0 0"
-        false
-	fi
-
-	# cleanup loops
-	for loop in ${LOOPDEV} ${LOOPDEV_BOOT} ${LOOPDEV_FS} ; do
-		${LOSETUP} -d $loop || true
-	done
-
-	# If an SD image is already present, reuse and reformat it
-	if [ ! -e ${SDIMG} ] ; then
-		dd if=/dev/zero of=${SDIMG} bs=$(echo '255 * 63 * 512' | bc) count=${SDIMG_SIZE}
-	fi
-
-	${LOSETUP} ${LOOPDEV} ${SDIMG}
-
-	# Create partition table
-	dd if=/dev/zero of=${LOOPDEV} bs=1024 count=1024
-	SIZE=$(/sbin/fdisk -l ${LOOPDEV} | grep Disk | grep bytes | awk '{print $5}')
-	CYLINDERS=$(echo $SIZE/255/63/512 | bc)
-	{
-	echo ,9,0x0C,*
-	echo ,,,-
-	} | /sbin/sfdisk -D -H 255 -S 63 -C ${CYLINDERS} ${LOOPDEV}
-
-	# Prepare loop devices for boot and filesystem partitions
-	BOOT_OFFSET=32256
-	FS_OFFSET_SECT=$(/sbin/fdisk -l -u ${LOOPDEV} 2>&1 | grep Linux | perl -p -i -e "s/\s+/ /"|cut -d " " -f 2)
-	FS_OFFSET=$(echo "$FS_OFFSET_SECT * 512" | bc)
-	FS_SIZE_BLOCKS=$(/sbin/fdisk -l -u ${LOOPDEV} 2>&1 | grep Linux | perl -p -i -e "s/\s+/ /g" \ 
-	|cut -d " " -f 4 | cut -d "+" -f 1)
- 
-	LOOPDEV_BLOCKS=$(/sbin/fdisk -l -u ${LOOPDEV} 2>&1 | grep FAT | perl -p -i -e "s/\s+/ /g"|cut -d " " -f 5)
-	LOOPDEV_BYTES=$(echo "$LOOPDEV_BLOCKS * 1024" | bc)
-
-	${LOSETUP} -d ${LOOPDEV}
-
-	${LOSETUP} ${LOOPDEV_BOOT} ${SDIMG} -o ${BOOT_OFFSET} 
-
-	/sbin/mkfs.vfat ${LOOPDEV_BOOT} -n ${BOOTPARTNAME} $LOOPDEV_BLOCKS
-
-	# Prepare filesystem partition
-	# Copy ubi used by flashing scripts
-	if [ -e  ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ] ; then
-		echo "Copying UBIFS image to file system"
-		cp ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ${IMAGE_ROOTFS}/boot/fs.ubi
-	fi
-
-	# Prepare boot partion. First mount the boot partition, and copy the boot loader and supporting files
-	# from the root filesystem
-
-	mkdir -p ${WORKDIR}/tmp-mnt-boot
-	mount $LOOPDEV_BOOT ${WORKDIR}/tmp-mnt-boot
-
-	echo "Copying bootloaders into the boot partition"
-	if [ -e ${IMAGE_ROOTFS}/boot/MLO ] ; then
-		cp -v ${IMAGE_ROOTFS}/boot/MLO ${WORKDIR}/tmp-mnt-boot 
-	else
-		cp -v ${DEPLOY_DIR_IMAGE}/MLO ${WORKDIR}/tmp-mnt-boot
-	fi
-
-	# Check for u-boot SPL
-	if [ -e ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.img ] ; then
-		suffix=img
-	else
-		suffix=bin
-	fi
-
-	cp -v ${IMAGE_ROOTFS}/boot/uEnv.txt ${WORKDIR}/tmp-mnt-boot || true
-	cp -v ${IMAGE_ROOTFS}/boot/user.txt ${WORKDIR}/tmp-mnt-boot || true
-	cp -v ${IMAGE_ROOTFS}/boot/uImage ${WORKDIR}/tmp-mnt-boot || true
-
-	if [ -e ${IMAGE_ROOTFS}/boot/u-boot.$suffix ] ; then
-		cp -v ${IMAGE_ROOTFS}/boot/{u-boot.$suffix} ${WORKDIR}/tmp-mnt-boot || true
-	else
-		cp -v ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.$suffix ${WORKDIR}/tmp-mnt-boot/u-boot.$suffix 
-	fi
-
-	if [ -n ${FATPAYLOAD} ] ; then
-		echo "Copying payload into VFAT"
-		for entry in ${FATPAYLOAD} ; do
-				# add the || true to stop aborting on vfat issues like not supporting .~lock files
-				cp -av ${IMAGE_ROOTFS}$entry ${WORKDIR}/tmp-mnt-boot || true
-		done
-	fi
-
-	echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${IMAGE_ROOTFS}/etc/image-version-info
-
-	# Cleanup VFAT mount
-	echo "Cleaning up VFAT mount"
-	umount ${WORKDIR}/tmp-mnt-boot
-	${LOSETUP} -d ${LOOPDEV_BOOT} || true
-
-	# Prepare rootfs parition
-	echo "Creating rootfs loopback"
-	${LOSETUP} ${LOOPDEV_FS} ${SDIMG} -o ${FS_OFFSET}
-
-	FS_NUM_INODES=$(echo $FS_SIZE_BLOCKS / 4 | bc)
-
-	case "${ROOTFSTYPE}" in
-		ext3)
-				genext2fs -z -N $FS_NUM_INODES -b $FS_SIZE_BLOCKS -d ${IMAGE_ROOTFS} ${LOOPDEV_FS}
-				tune2fs -L ${IMAGE_NAME} -j ${LOOPDEV_FS}
-				;;
-		ext4)
-				genext2fs -z -N $FS_NUM_INODES -b $FS_SIZE_BLOCKS -d ${IMAGE_ROOTFS} ${LOOPDEV_FS}
-				tune2fs -L ${IMAGE_NAME} -j -O extents,uninit_bg,dir_index ${LOOPDEV_FS}
-				;;
-		*)
-				echo "Please set ROOTFSTYPE to something supported"
-				exit 1
-				;;
-	esac
-
-	${LOSETUP} -d ${LOOPDEV_FS} || true
-
-	gzip -c ${WORKDIR}/sd.img > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}-${IMAGEDATESTAMP}.img.gz
-	rm -f ${WORKDIR}/sd.img
-}

conf/layer.conf

@@ -7,3 +7,5 @@ BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
 BBFILE_COLLECTIONS += "meta-ti"
 BBFILE_PATTERN_meta-ti := "^${LAYERDIR}/"
 BBFILE_PRIORITY_meta-ti = "6"
+
+LICENSE_PATH += "${LAYERDIR}/licenses"

conf/machine/am180x-evm.conf

@@ -9,7 +9,7 @@ UBOOT_MACHINE = "da850evm_config"
 UBOOT_ENTRYPOINT = "0xc0008000"
 UBOOT_LOADADDRESS = "0xc0008000"
 
-IMAGE_FSTYPES += "tar.gz ubi"
+IMAGE_FSTYPES += "tar.gz"
 
 SERIAL_CONSOLE = "115200 ttyS2"
 

conf/machine/am437x-evm.conf

@@ -0,0 +1,35 @@
+#@TYPE: Machine
+#@NAME: AM437x EVM
+#@DESCRIPTION: Machine configuration for the TI AM437x EVM
+
+require conf/machine/include/ti43x.inc
+
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen"
+
+IMAGE_FSTYPES += "ubi tar.gz"
+
+SERIAL_CONSOLE = "115200 ttyO0"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 11 -O 4096
+# From dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: logical eraseblock size:    253952 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 994 LEBs
+MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 1918"
+
+# do ubiattach /dev/ubi_ctrl -m 11 -O 4096
+# from dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: physical eraseblock size:   262144 bytes (256 KiB)
+# UBI: sub-page size:              4096
+# UBI: VID header offset:          4096 (aligned 4096)
+UBINIZE_ARGS = "-m 4096 -p 256KiB -s 4096 -O 4096"

conf/machine/dra7xx-evm.conf

@@ -8,9 +8,6 @@ IMAGE_FSTYPES += "ubi tar.gz"
 
 SERIAL_CONSOLE = "115200 ttyO0"
 
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-dra7xx"
-PREFERRED_PROVIDER_u-boot = "u-boot-dra7xx"
-
 UBOOT_MACHINE = "dra7xx_evm_config"
 
 # UBI information.  Note that this is board and kernel specific.  Changes

conf/machine/include/keystone.inc

@@ -8,16 +8,14 @@ PREFERRED_PROVIDER_virtual/bootloader = "u-boot-keystone"
 PREFERRED_PROVIDER_u-boot = "u-boot-keystone"
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r6"
+MACHINE_KERNEL_PR = "r7"
 
 KERNEL_IMAGETYPE = "uImage"
 
-UBOOT_MACHINE = "tci6638_evm_config"
-
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"
 
 EXTRA_IMAGEDEPENDS += "u-boot"
 EXTRA_IMAGEDEPENDS += "boot-monitor"
 
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat"
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat pci"

conf/machine/include/omap-a15.inc

@@ -4,13 +4,13 @@ require conf/machine/include/soc-family.inc
 require conf/machine/include/tune-cortexa15.inc
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r1"
+MACHINE_KERNEL_PR = "r3"
 
 PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
 PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
 PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
 
-KERNEL_IMAGETYPE = "uImage"
+KERNEL_IMAGETYPE = "zImage"
 
 UBOOT_ARCH = "arm"
 UBOOT_ENTRYPOINT = "0x80008000"
@@ -24,3 +24,7 @@ XSERVER = "xserver-xorg \
            xf86-video-fbdev"
 
 GUI_MACHINE_CLASS = "smallscreen"
+
+# Use the expected value of the ubifs filesystem's volume name in the kernel
+# and u-boot.
+UBI_VOLNAME = "rootfs"

conf/machine/include/omap4.inc

@@ -8,9 +8,6 @@ PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
 
 PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
 XSERVER = "xserver-xorg \
-           xserver-xorg-extension-dri \
-           xserver-xorg-extension-dri2 \
-           xserver-xorg-extension-glx \
            xserver-xorg-module-exa \
            xf86-input-evdev \
            xf86-video-omap"

conf/machine/include/ti33x.inc

@@ -16,14 +16,14 @@ XSERVER = "xserver-xorg \
 GUI_MACHINE_CLASS = "bigscreen"
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r19"
+MACHINE_KERNEL_PR = "r21"
 
 # Default providers, may need to override for specific machines
 PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
 PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
 PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
 
-KERNEL_IMAGETYPE = "uImage"
+KERNEL_IMAGETYPE = "zImage"
 
 UBOOT_ARCH = "arm"
 UBOOT_MACHINE = "am335x_evm_config"
@@ -31,6 +31,10 @@ UBOOT_MACHINE = "am335x_evm_config"
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"
 
+# Use the expected value of the ubifs filesystem's volume name in the kernel
+# and u-boot.
+UBI_VOLNAME = "rootfs"
+
 EXTRA_IMAGEDEPENDS += "u-boot"
 
 # List common SoC features, may need to add touchscreen for specific machines

conf/machine/include/ti43x.inc

@@ -0,0 +1,41 @@
+SOC_FAMILY = "ti43x"
+require conf/machine/include/soc-family.inc
+
+require conf/machine/include/tune-cortexa9.inc
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+
+# For built-in LCD, add xf86-input-tslib
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-fbdev \
+           xf86-input-keyboard"
+
+# Default to external video, change to smallscreen for built-in LCD
+GUI_MACHINE_CLASS = "bigscreen"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r2"
+
+# Default providers, may need to override for specific machines
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+KERNEL_IMAGETYPE = "zImage"
+
+UBOOT_ARCH = "arm"
+UBOOT_MACHINE = "am43xx_evm_config"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+# Use the expected value of the ubifs filesystem's volume name in the kernel
+# and u-boot.
+UBI_VOLNAME = "rootfs"
+
+EXTRA_IMAGEDEPENDS += "u-boot"
+
+# List common SoC features, may need to add touchscreen for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet sgx"

conf/machine/include/tune-cortexa15.inc

@@ -1,36 +0,0 @@
-DEFAULTTUNE ?= "armv7a-neon"
-
-require conf/machine/include/arm/arch-armv7a.inc
-
-TUNEVALID[cortexa15] = "Enable Cortex-A15 specific processor optimizations"
-TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa15", "-mtune=cortex-a15", "", d)}"
-
-# Little Endian base configs
-AVAILTUNES += "cortexa15 cortexa15t cortexa15-neon cortexa15t-neon"
-ARMPKGARCH_tune-cortexa15 = "cortexa15"
-ARMPKGARCH_tune-cortexa15t = "cortexa15"
-ARMPKGARCH_tune-cortexa15-neon = "cortexa15"
-ARMPKGARCH_tune-cortexa15t-neon = "cortexa15"
-TUNE_FEATURES_tune-cortexa15 = "${TUNE_FEATURES_tune-armv7a} cortexa15"
-TUNE_FEATURES_tune-cortexa15t = "${TUNE_FEATURES_tune-armv7at} cortexa15"
-TUNE_FEATURES_tune-cortexa15-neon = "${TUNE_FEATURES_tune-armv7a-neon} cortexa15"
-TUNE_FEATURES_tune-cortexa15t-neon = "${TUNE_FEATURES_tune-armv7at-neon} cortexa15"
-PACKAGE_EXTRA_ARCHS_tune-cortexa15 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a} cortexa15-vfp"
-PACKAGE_EXTRA_ARCHS_tune-cortexa15t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} cortexa15-vfp cortexa15t2-vfp"
-PACKAGE_EXTRA_ARCHS_tune-cortexa15-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} cortexa15-vfp cortexa15-vfp-neon"
-PACKAGE_EXTRA_ARCHS_tune-cortexa15t-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7at-neon} cortexa15-vfp cortexa15-vfp-neon cortexa15t2-vfp cortexa15t2-vfp-neon"
-
-# VFP Tunes
-AVAILTUNES += "cortexa15hf cortexa15thf cortexa15hf-neon cortexa15thf-neon"
-ARMPKGARCH_tune-cortexa15hf = "cortexa15"
-ARMPKGARCH_tune-cortexa15thf = "cortexa15"
-ARMPKGARCH_tune-cortexa15hf-neon = "cortexa15"
-ARMPKGARCH_tune-cortexa15thf-neon = "cortexa15"
-TUNE_FEATURES_tune-cortexa15hf ?= "${TUNE_FEATURES_tune-armv7ahf} cortexa15"
-TUNE_FEATURES_tune-cortexa15thf ?= "${TUNE_FEATURES_tune-armv7athf} cortexa15"
-TUNE_FEATURES_tune-cortexa15hf-neon ?= "${TUNE_FEATURES_tune-armv7ahf-neon} cortexa15"
-TUNE_FEATURES_tune-cortexa15thf-neon ?= "${TUNE_FEATURES_tune-armv7athf-neon} cortexa15"
-PACKAGE_EXTRA_ARCHS_tune-cortexa15hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf} cortexa15hf-vfp"
-PACKAGE_EXTRA_ARCHS_tune-cortexa15thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} cortexa15hf-vfp cortexa15t2hf-vfp"
-PACKAGE_EXTRA_ARCHS_tune-cortexa15hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon} cortexa15hf-vfp cortexa15hf-vfp-neon"
-PACKAGE_EXTRA_ARCHS_tune-cortexa15thf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon} cortexa15hf-vfp cortexa15hf-vfp-neon cortexa15t2hf-vfp cortexa15t2hf-vfp-neon"

conf/machine/include/tune-cortexa7.inc

@@ -1,36 +0,0 @@
-DEFAULTTUNE ?= "armv7a-neon"
-
-require conf/machine/include/arm/arch-armv7a.inc
-
-TUNEVALID[cortexa7] = "Enable Cortex-A7 specific processor optimizations"
-TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa7", "-mtune=cortex-a7", "", d)}"
-
-# Little Endian base configs
-AVAILTUNES += "cortexa7 cortexa7t cortexa7-neon cortexa7t-neon"
-ARMPKGARCH_tune-cortexa7 = "cortexa7"
-ARMPKGARCH_tune-cortexa7t = "cortexa7"
-ARMPKGARCH_tune-cortexa7-neon = "cortexa7"
-ARMPKGARCH_tune-cortexa7t-neon = "cortexa7"
-TUNE_FEATURES_tune-cortexa7 = "${TUNE_FEATURES_tune-armv7a} cortexa7"
-TUNE_FEATURES_tune-cortexa7t = "${TUNE_FEATURES_tune-armv7at} cortexa7"
-TUNE_FEATURES_tune-cortexa7-neon = "${TUNE_FEATURES_tune-armv7a-neon} cortexa7"
-TUNE_FEATURES_tune-cortexa7t-neon = "${TUNE_FEATURES_tune-armv7at-neon} cortexa7"
-PACKAGE_EXTRA_ARCHS_tune-cortexa7 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a} cortexa7-vfp"
-PACKAGE_EXTRA_ARCHS_tune-cortexa7t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} cortexa7-vfp cortexa7t2-vfp"
-PACKAGE_EXTRA_ARCHS_tune-cortexa7-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} cortexa7-vfp cortexa7-vfp-neon"
-PACKAGE_EXTRA_ARCHS_tune-cortexa7t-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7at-neon} cortexa7-vfp cortexa7-vfp-neon cortexa7t2-vfp cortexa7t2-vfp-neon"
-
-# VFP Tunes
-AVAILTUNES += "cortexa7hf cortexa7thf cortexa7hf-neon cortexa7thf-neon"
-ARMPKGARCH_tune-cortexa7hf = "cortexa7"
-ARMPKGARCH_tune-cortexa7thf = "cortexa7"
-ARMPKGARCH_tune-cortexa7hf-neon = "cortexa7"
-ARMPKGARCH_tune-cortexa7thf-neon = "cortexa7"
-TUNE_FEATURES_tune-cortexa7hf ?= "${TUNE_FEATURES_tune-armv7ahf} cortexa7"
-TUNE_FEATURES_tune-cortexa7thf ?= "${TUNE_FEATURES_tune-armv7athf} cortexa7"
-TUNE_FEATURES_tune-cortexa7hf-neon ?= "${TUNE_FEATURES_tune-armv7ahf-neon} cortexa7"
-TUNE_FEATURES_tune-cortexa7thf-neon ?= "${TUNE_FEATURES_tune-armv7athf-neon} cortexa7"
-PACKAGE_EXTRA_ARCHS_tune-cortexa7hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf} cortexa7hf-vfp"
-PACKAGE_EXTRA_ARCHS_tune-cortexa7thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} cortexa7hf-vfp cortexa7t2hf-vfp"
-PACKAGE_EXTRA_ARCHS_tune-cortexa7hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon} cortexa7hf-vfp cortexa7hf-vfp-neon"
-PACKAGE_EXTRA_ARCHS_tune-cortexa7thf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon} cortexa7hf-vfp cortexa7hf-vfp-neon cortexa7t2hf-vfp cortexa7t2hf-vfp-neon"

conf/machine/include/tune-cortexa8.inc

@@ -1,36 +0,0 @@
-DEFAULTTUNE ?= "armv7a-neon"
-
-require conf/machine/include/arm/arch-armv7a.inc
-
-TUNEVALID[cortexa8] = "Enable Cortex-A8 specific processor optimizations"
-TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa8", "-mtune=cortex-a8", "", d)}"
-
-# Little Endian base configs
-AVAILTUNES += "cortexa8 cortexa8t cortexa8-neon cortexa8t-neon"
-ARMPKGARCH_tune-cortexa8 = "cortexa8"
-ARMPKGARCH_tune-cortexa8t = "cortexa8"
-ARMPKGARCH_tune-cortexa8-neon = "cortexa8"
-ARMPKGARCH_tune-cortexa8t-neon = "cortexa8"
-TUNE_FEATURES_tune-cortexa8 = "${TUNE_FEATURES_tune-armv7a} cortexa8"
-TUNE_FEATURES_tune-cortexa8t = "${TUNE_FEATURES_tune-armv7at} cortexa8"
-TUNE_FEATURES_tune-cortexa8-neon = "${TUNE_FEATURES_tune-armv7a-neon} cortexa8"
-TUNE_FEATURES_tune-cortexa8t-neon = "${TUNE_FEATURES_tune-armv7at-neon} cortexa8"
-PACKAGE_EXTRA_ARCHS_tune-cortexa8 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a} cortexa8-vfp"
-PACKAGE_EXTRA_ARCHS_tune-cortexa8t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} cortexa8-vfp cortexa8t2-vfp"
-PACKAGE_EXTRA_ARCHS_tune-cortexa8-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} cortexa8-vfp cortexa8-vfp-neon"
-PACKAGE_EXTRA_ARCHS_tune-cortexa8t-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7at-neon} cortexa8-vfp cortexa8-vfp-neon cortexa8t2-vfp cortexa8t2-vfp-neon"
-
-# VFP Tunes
-AVAILTUNES += "cortexa8hf cortexa8thf cortexa8hf-neon cortexa8thf-neon"
-ARMPKGARCH_tune-cortexa8hf = "cortexa8"
-ARMPKGARCH_tune-cortexa8thf = "cortexa8"
-ARMPKGARCH_tune-cortexa8hf-neon = "cortexa8"
-ARMPKGARCH_tune-cortexa8thf-neon = "cortexa8"
-TUNE_FEATURES_tune-cortexa8hf ?= "${TUNE_FEATURES_tune-armv7ahf} cortexa8"
-TUNE_FEATURES_tune-cortexa8thf ?= "${TUNE_FEATURES_tune-armv7athf} cortexa8"
-TUNE_FEATURES_tune-cortexa8hf-neon ?= "${TUNE_FEATURES_tune-armv7ahf-neon} cortexa8"
-TUNE_FEATURES_tune-cortexa8thf-neon ?= "${TUNE_FEATURES_tune-armv7athf-neon} cortexa8"
-PACKAGE_EXTRA_ARCHS_tune-cortexa8hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf} cortexa8hf-vfp"
-PACKAGE_EXTRA_ARCHS_tune-cortexa8thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} cortexa8hf-vfp cortexa8t2hf-vfp"
-PACKAGE_EXTRA_ARCHS_tune-cortexa8hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon} cortexa8hf-vfp cortexa8hf-vfp-neon"
-PACKAGE_EXTRA_ARCHS_tune-cortexa8thf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon} cortexa8hf-vfp cortexa8hf-vfp-neon cortexa8t2hf-vfp cortexa8t2hf-vfp-neon"

conf/machine/include/tune-cortexa9.inc

@@ -1,36 +0,0 @@
-DEFAULTTUNE ?= "armv7a-neon"
-
-require conf/machine/include/arm/arch-armv7a.inc
-
-TUNEVALID[cortexa9] = "Enable Cortex-A9 specific processor optimizations"
-TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa9", "-mtune=cortex-a9", "", d)}"
-
-# Little Endian base configs
-AVAILTUNES += "cortexa9 cortexa9t cortexa9-neon cortexa9t-neon"
-ARMPKGARCH_tune-cortexa9 = "cortexa9"
-ARMPKGARCH_tune-cortexa9t = "cortexa9"
-ARMPKGARCH_tune-cortexa9-neon = "cortexa9"
-ARMPKGARCH_tune-cortexa9t-neon = "cortexa9"
-TUNE_FEATURES_tune-cortexa9 = "${TUNE_FEATURES_tune-armv7a} cortexa9"
-TUNE_FEATURES_tune-cortexa9t = "${TUNE_FEATURES_tune-armv7at} cortexa9"
-TUNE_FEATURES_tune-cortexa9-neon = "${TUNE_FEATURES_tune-armv7a-neon} cortexa9"
-TUNE_FEATURES_tune-cortexa9t-neon = "${TUNE_FEATURES_tune-armv7at-neon} cortexa9"
-PACKAGE_EXTRA_ARCHS_tune-cortexa9 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a} cortexa9-vfp"
-PACKAGE_EXTRA_ARCHS_tune-cortexa9t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} cortexa9-vfp cortexa9t2-vfp"
-PACKAGE_EXTRA_ARCHS_tune-cortexa9-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} cortexa9-vfp cortexa9-vfp-neon"
-PACKAGE_EXTRA_ARCHS_tune-cortexa9t-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7at-neon} cortexa9-vfp cortexa9-vfp-neon cortexa9t2-vfp cortexa9t2-vfp-neon"
-
-# VFP Tunes
-AVAILTUNES += "cortexa9hf cortexa9thf cortexa9hf-neon cortexa9thf-neon"
-ARMPKGARCH_tune-cortexa9hf = "cortexa9"
-ARMPKGARCH_tune-cortexa9thf = "cortexa9"
-ARMPKGARCH_tune-cortexa9hf-neon = "cortexa9"
-ARMPKGARCH_tune-cortexa9thf-neon = "cortexa9"
-TUNE_FEATURES_tune-cortexa9hf ?= "${TUNE_FEATURES_tune-armv7ahf} cortexa9"
-TUNE_FEATURES_tune-cortexa9thf ?= "${TUNE_FEATURES_tune-armv7athf} cortexa9"
-TUNE_FEATURES_tune-cortexa9hf-neon ?= "${TUNE_FEATURES_tune-armv7ahf-neon} cortexa9"
-TUNE_FEATURES_tune-cortexa9thf-neon ?= "${TUNE_FEATURES_tune-armv7athf-neon} cortexa9"
-PACKAGE_EXTRA_ARCHS_tune-cortexa9hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf} cortexa9hf-vfp"
-PACKAGE_EXTRA_ARCHS_tune-cortexa9thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} cortexa9hf-vfp cortexa9t2hf-vfp"
-PACKAGE_EXTRA_ARCHS_tune-cortexa9hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon} cortexa9hf-vfp cortexa9hf-vfp-neon"
-PACKAGE_EXTRA_ARCHS_tune-cortexa9thf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon} cortexa9hf-vfp cortexa9hf-vfp-neon cortexa9t2hf-vfp cortexa9t2hf-vfp-neon"

conf/machine/k2e-evm.conf

@@ -1,9 +1,13 @@
 #@TYPE: Machine
-#@NAME: Keystone 2 machine
-#@DESCRIPTION: Machine configuration for the TI Keystone 2
+#@NAME: Keystone 2 K2E machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2E EVM
 
 require conf/machine/include/keystone.inc
 
+UBOOT_MACHINE = "k2e_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2e"
+
 IMAGE_FSTYPES += "ubi tar.gz cpio"
 
 SERIAL_CONSOLE = "115200 ttyS0"
@@ -15,9 +19,8 @@ SYSVINIT_ENABLED_GETTYS = ""
 # UBI: smallest flash I/O unit:    2048
 # UBI: logical eraseblock size:    126976 bytes
 # from ubiattach stdout:
-# UBI device number 0, total 857 LEBs
-# MKUBIFS_ARGS = "-m 2048 -e 129024 -c 857"
-MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 857"
+# UBI device number 0, total 3856 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3856"
 
 # do ubiattach /dev/ubi_ctrl -m 4
 # from dmesg:

conf/machine/k2hk-evm.conf

@@ -0,0 +1,30 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2HK machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2HK EVM
+
+require conf/machine/include/keystone.inc
+
+UBOOT_MACHINE = "k2hk_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2hk"
+
+IMAGE_FSTYPES += "ubi tar.gz cpio"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 3856 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3856"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              2048
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048"

conf/machine/k2l-evm.conf

@@ -0,0 +1,30 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2L machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2L EVM
+
+require conf/machine/include/keystone.inc
+
+UBOOT_MACHINE = "k2l_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2l"
+
+IMAGE_FSTYPES += "ubi tar.gz cpio"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: logical eraseblock size:    253952 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1926 LEBs
+MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 1926"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: physical eraseblock size:   256 KiB
+# UBI: sub-page size:              4096
+UBINIZE_ARGS = "-m 4096 -p 256KiB -s 4096 -O 4096"

licenses/TI-TFL

@@ -0,0 +1,62 @@
+TEXAS INSTRUMENTS TEXT FILE LICENSE
+
+Copyright (c) [earliest year] - [latest year] Texas Instruments Incorporated
+
+All rights reserved not granted herein.
+
+Limited License.
+
+Texas Instruments Incorporated grants a world-wide, royalty-free,
+non-exclusive license under copyrights and patents it now or hereafter owns
+or controls to make, have made, use, import, offer to sell and sell
+("Utilize") this software subject to the terms herein.  With respect to the
+foregoing patent license, such license is granted  solely to the extent that
+any such patent is necessary to Utilize the software alone.  The patent
+license shall not apply to any combinations which include this software,
+other than combinations with devices manufactured by or for TI ("TI
+Devices").  No hardware patent is licensed hereunder.
+
+Redistributions must preserve existing copyright notices and reproduce this
+license (including the above copyright notice and the disclaimer and (if
+applicable) source code license limitations below) in the documentation
+and/or other materials provided with the distribution
+
+Redistribution and use in binary form, without modification, are permitted
+provided that the following conditions are met:
+
+* No reverse engineering, decompilation, or disassembly of this software is
+permitted with respect to any software provided in binary form.
+
+* any redistribution and use are licensed by TI for use only with TI
+Devices.
+
+* Nothing shall obligate TI to provide you with source code for the software
+licensed and provided to you in object code.
+
+If software source code is provided to you, modification and redistribution
+of the source code are permitted provided that the following conditions are
+met:
+
+* any redistribution and use of the source code, including any resulting
+derivative works, are licensed by TI for use only with TI Devices.
+
+* any redistribution and use of any object code compiled from the source
+code and any resulting derivative works, are licensed by TI for use only
+with TI Devices.
+
+Neither the name of Texas Instruments Incorporated nor the names of its
+suppliers may be used to endorse or promote products derived from this
+software without specific prior written permission.
+
+DISCLAIMER.
+
+THIS SOFTWARE IS PROVIDED BY TI AND TI'S LICENSORS "AS IS" AND ANY EXPRESS
+OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+NO EVENT SHALL TI AND TI'S LICENSORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

licenses/TI-TSPA

@@ -0,0 +1,206 @@
+Texas Instruments Incorporated
+Technology and Software Publicly Available
+Software License Agreement
+
+
+Important - Please read the following license agreement carefully.  This is
+a legally binding agreement.  Do not click "i have read and agree" or use
+(as applicable) the Licensed Materials unless: (1) you are authorized to
+accept and agree to the terms of this license agreement on behalf of
+yourself or your company (as applicable) and (2) you intend to be bound by
+the terms of this license agreement on behalf of yourself or your company
+(as applicable).
+
+This Software License Agreement ("Agreement") is a legal agreement between
+you (either an individual or entity) and Texas Instruments Incorporated
+("TI"), 12500 TI Boulevard, Dallas, Texas 75243.  The "Licensed Materials"
+subject to this Agreement include the software programs (in whole or in
+part), that accompany this Agreement and set forth in the applicable
+software manifest and which you access "on-line" and/or electronic
+documentation (in whole or in part) associated and provided with these
+software programs.  By installing, copying or otherwise using the Licensed
+Materials you agree to abide by the terms of this Agreement.  If you choose
+not to accept or agree with these terms, do not download or install the
+Licensed Materials.
+
+Note Regarding Possible Access to Open Source Software:  The Licensed
+Materials may be bundled with Open Source Software.  "Open Source Software"
+means any software licensed under terms requiring that (A) other software
+("Proprietary Software") incorporated, combined or distributed with such
+software or developed using such software: (i) be disclosed or distributed
+in source code form; or (ii) otherwise be licensed on terms inconsistent
+with the terms of this Agreement, including but not limited to permitting
+use of the Proprietary Software on or with devices other than TI Devices, or
+(B) require the owner of Proprietary Software to license any of its patents
+to users of the Open Source Software and/or Proprietary Software
+incorporated, combined or distributed with such Open Source Software or
+developed using such Open Source Software.
+
+You may gain access to Open Source Software, in which case such Open Source
+Software will be listed in the applicable software manifest (in whole or in
+part, the "Open Source Materials").  Your use of the Open Source Materials
+is subject to the separate licensing terms applicable to such Open Source
+Materials as specified in the applicable software manifest.  For
+clarification, this Agreement does not limit your rights under, or grant you
+rights that supersede, the license terms of any applicable Open Source
+Materials license agreement.  If any of the Open Source Materials have been
+provided to you in object code only, TI will provide to you or show you
+where can access the source code versions of such Open Source Materials if
+you contact TI at Texas Instruments Incorporated, 12500 TI Boulevard, Mail
+Station 8638, Dallas, Texas 75243, Attention: Contracts Manager.  You may
+terminate this Agreement in the event you choose not to accept or agree with
+the terms in any applicable Open Source Materials license agreement,
+provided that such termination occurs within five (5) calendar days of
+acceptance of this Agreement and you abide by all applicable license terms
+in this Agreement until such termination.
+
+1. License.
+
+a. Source Code License.  For the Licensed Materials provided in source code
+format, TI hereby grants to you a limited, non-exclusive license to
+reproduce, use, and create modified or derivative works of the Licensed
+Materials provided to you in source code format and to distribute an
+unlimited number of copies of such source code Licensed Materials, or any
+derivatives thereof, in any format.
+
+b.  Object Code License.  For the Licensed Materials provided in object code
+format, TI hereby grants to you a limited, non-exclusive license to
+reproduce and use the Licensed Materials provided to you in object code
+format and to distribute an unlimited number of object or executable copies
+of such object code Licensed Materials.
+
+2. Termination.  This Agreement is effective until terminated.  Without
+prejudice to any other rights, TI may terminate your right to use the
+Licensed Materials under this Agreement if you fail to comply with the terms
+of this Agreement.  In such event, you shall destroy all copies of the
+Licensed Materials, including all portions and derivatives thereof.
+
+3. Intellectual Property Rights.
+
+a. The Licensed Materials being provided to you hereunder are being made
+publicly available by TI, even though they contain copyrighted material of
+TI and its licensors, if applicable.   In no event may you alter, remove or
+destroy any copyright notice included in the Licensed Materials.  To the
+extent that any of the Licensed Materials are provided in binary or object
+code only, you may not unlock, decompile, reverse engineer, disassemble or
+otherwise translate such binary or object code to human-perceivable form.
+The source code of such reverse engineered code may contain TI trade secret
+and other proprietary information. TI reserves all rights not specifically
+granted under this Agreement.
+
+b. Certain Licensed Materials may (i) require patent licenses from third
+parties claiming patent rights covering implementation of the Licensed
+Materials or (ii) be based on industry recognized standards or software
+programs published by industry recognized standards bodies and certain third
+parties may claim to own patents or copyrights that cover implementation of
+those standards.  You acknowledge and agree that this Agreement does not
+convey a license to any such third party patents and copyrights.
+
+c. YOU ACKNOWLEDGE AND AGREE THAT TI SHALL NOT BE LIABLE FOR AND SHALL NOT
+DEFEND OR INDEMNIFY YOU AGAINST ANY THIRD PARTY INFRINGEMENT CLAIM THAT
+RELATES TO OR IS BASED ON YOUR MANUFACTURE, USE, OR DISTRIBUTION OF THE
+LICENSED MATERIALS OR YOUR MANUFACTURE, USE, OFFER FOR SALE, SALE,
+IMPORTATION OR DISTRIBUTION OF YOUR PRODUCTS THAT INCLUDE OR INCORPORATE THE
+LICENSED MATERIALS.
+
+d. You acknowledge and agree that you are responsible for any fees or
+royalties that may be payable to any third party based on such third party's
+interests in the Licensed Materials described in Section 3(b) above (the
+"Third Party Payment Obligations").  You agree to indemnify TI against any
+Third Party Payment Obligations and will defend any claim, suit or
+proceeding brought against TI insofar as such claim, suit or proceeding is
+based on your failure to pay any Third Party Payment Obligations.
+
+4. Warranties and Limitations.  THE LICENSED MATERIALS ARE PROVIDED "AS IS".
+TI AND ITS LICENSORS MAKE NO WARRANTY OR REPRESENTATION, EXPRESS, IMPLIED OR
+STATUTORY, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTIBILITY, FITNESS FOR
+A PARTICULAR PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS OF
+RESPONSES, RESULTS AND LACK OF NEGLIGENCE.  TI DISCLAIMS ANY WARRANTY OF
+TITLE, QUIET ENJOYMENT, QUIET POSESSION, AND NON-INFRINGEMENT OF ANY THIRD
+PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO THE LICENSED MATERIALS OR
+USE OF THOSE MATERIALS.
+
+YOU ACKNOWLEDGE AND AGREE THAT THE LICENSED MATERIALS MAY NOT BE INTENDED
+FOR PRODUCTION APPLICATIONS AND MAY CONTAIN IRREGULARITIES AND DEFECTS NOT
+FOUND IN PRODUCTION SOFTWARE.  FURTHERMORE, YOU ACKNOWLEDGE AND AGREE THAT
+THE LICENSED MATERIALS HAVE NOT BEEN TESTED OR CERTIFIED BY ANY GOVERNMENT
+AGENCY OR INDUSTRY REGULATORY ORGANIZATION OR ANY OTHER THIRD PARTY
+ORGANIZATION.  YOU AGREE THAT PRIOR TO USING, INCORPORATING OR DISTRIBUTING
+THE LICENSED MATERIALS IN OR WITH ANY COMMERCIAL PRODUCT THAT YOU WILL
+THOROUGHLY TEST THE PRODUCT AND THE FUNCTIONALITY OF THE LICENSED MATERIALS
+IN OR WITH THAT PRODUCT AND BE SOLELY RESPONSIBLE FOR ANY PROBLEMS OR
+FAILURES.
+
+IN NO EVENT SHALL TI OR ITS LICENSORS BE LIABLE FOR ANY SPECIAL, INDIRECT,
+INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED ON ANY THEORY
+OF LIABILITY, ARISING IN ANY WAY OUT OF THIS AGREEMENT, OR YOUR USE OF THE
+LICENSED MATERIALS, WHETHER OR NOT TI HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.  EXCLUDED DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, COST OF
+REMOVAL OR REINSTALLATION, OUTSIDE COMPUTER TIME, LABOR COSTS, LOSS OR
+CORRUPTION OF DATA, LOSS OF GOODWILL, LOSS OF PROFITS, LOSS OF SAVINGS, OR
+LOSS OF USE OR INTERRUPTION OF BUSINESS OR ANY OTHER ECONOMIC LOSS.  IN NO
+EVENT WILL TI'S AGGREGATE LIABILITY UNDER THIS AGREEMENT OR ARISING OUT OF
+YOUR USE OF THE LICENSED MATERIALS EXCEED FIVE HUNDRED U.S. DOLLARS
+(US$500).
+
+Because some jurisdictions do not allow the exclusion or limitation of
+incidental or consequential damages or limitation on how long an implied
+warranty lasts, the above limitations or exclusions may not apply to you.
+
+5. Export Control.  The Licensed Materials may be subject to the export or
+import regulations of certain countries. You agree to comply with all such
+regulations and acknowledge that you have the responsibility to obtain any
+licenses or other authorizations that may be required to export, re-export
+or import the Licensed Materials.
+
+6. Governing Law, Jurisdiction and Severability.  This Agreement will be
+governed by and interpreted in accordance with the laws of the State of
+Texas, without reference to conflict of laws principles.  If for any reason
+a court of competent jurisdiction finds any provision of the Agreement to be
+unenforceable, that provision will be enforced to the maximum extent
+possible to effectuate the intent of the parties and the remainder of the
+Agreement shall continue in full force and effect. This Agreement shall not
+be governed by the United Nations Convention on Contracts for the
+International Sale of Goods, or by the Uniform Computer Information
+Transactions Act (UCITA). The parties agree that non-exclusive jurisdiction
+for any dispute arising out of or relating to this Agreement lies within the
+courts located in the State of Texas.  Notwithstanding the foregoing, any
+judgment may be enforced in any United States or foreign court, and either
+party may seek injunctive relief in any United States or foreign court.
+Failure by TI to enforce any provision of this Agreement shall not be deemed
+a waiver of future enforcement of that or any other provision in this
+Agreement or any other agreement that may be in place between the parties.
+
+7. PRC Provisions.  If you are located in the People's Republic of China
+("PRC") or if the Licensed Materials will be sent to the PRC, the following
+provisions shall apply:
+
+a. Registration Requirements.  You shall be solely responsible for
+performing all acts and obtaining all approvals that may be required in
+connection with this Agreement by the government of the PRC, including but
+not limited to registering pursuant to, and otherwise complying with, the
+PRC Measures on the Administration of Software Products, Management
+Regulations on Technology Import-Export, and Technology Import and Export
+Contract Registration Management Rules.  Upon receipt of such approvals from
+the government authorities, you shall forward evidence of all such approvals
+to TI for its records.  In the event that you fail to obtain any such
+approval or registration, you shall be solely responsible for any and all
+losses, damages or costs resulting therefrom, and shall indemnify TI for all
+such losses, damages or costs.
+
+b. Governing Language.  This Agreement is written and executed in the
+English language.  If a translation of this Agreement is required for any
+purpose, including but not limited to registration of the Agreement pursuant
+to any governmental laws, regulations or rules, you shall be solely
+responsible for creating such translation.  Any translation of this
+Agreement into a language other than English is intended solely in order to
+comply with such laws or for reference purposes, and the English language
+version shall be authoritative and controlling.
+
+8. Entire Agreement.  This is the entire agreement between you and TI and
+supersedes any prior agreement between the parties related to the subject
+matter of this Agreement. No amendment or modification of this Agreement
+will be effective unless in writing and signed by a duly authorized
+representative of TI.  You hereby warrant and represent that you have
+obtained all authorizations and other applicable consents required
+empowering you to enter into this Agreement.

recipes-bsp/abefw/abefw_1.0.14.bb

@@ -0,0 +1,23 @@
+SUMMARY = "Firmware for OMAP4 and OMAP5 ABE"
+HOMEPAGE = "http://git.ti.com"
+LICENSE = "BSD | GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=923db086ed9463ab3215b24d87e05ec5"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+COMPATIBLE_MACHINE = "pandaboard|omap5-evm"
+
+SRC_URI = "git://git.ti.com/glsdk/abefw-omap4plus.git;protocol=git"
+
+S = "${WORKDIR}/git"
+
+SRCREV = "ceccc0332264e39bdc51e54f80ea7256a3886c58"
+
+PR = "r0"
+
+do_install() {
+        mkdir -p ${D}/lib/firmware
+        cp ${S}/firmware/omap4_abe_new ${D}/lib/firmware/
+}
+
+FILES_${PN} += "/lib/firmware/omap4_abe_new"

recipes-bsp/boot-monitor/boot-monitor_git.bb

@@ -5,22 +5,22 @@ LICENSE = "BSD"
 
 BOOT_MONITOR_BINARY ?= "skern.bin"
 BOOT_MONITOR_IMAGE  ?= "skern-${MACHINE}.bin"
-BOOT_MONITOR_MAKE_TARGET  ?= "all"
 
 LIC_FILES_CHKSUM = "file://COPYING;md5=25fe219a6febf6e5bb45beda1b2eb315"
 
-COMPATIBLE_MACHINE = "keystone-evm"
+COMPATIBLE_MACHINE = "keystone"
 
-SRC_URI = "git://arago-project.org/git/projects/boot-monitor.git;protocol=git;branch=${BRANCH}"
+SRC_URI = "git://git.ti.com/keystone-linux/boot-monitor.git;protocol=git;branch=${BRANCH}"
 
-PV = "1.0"
+PV = "2.0"
 PR = "r1+gitr${SRCPV}"
 
 BRANCH = "master"
 
 S = "${WORKDIR}/git"
 
-SRCREV = "DEV.MCSDK-03.00.00.07"
+#Tag "K2_BM_14.05"
+SRCREV = "0e3ffe1ea4a0cee38ae2406901b7cf4d5324b5e9"
 
 do_compile () {
 	unset LDFLAGS

recipes-bsp/cmem/cmem-mod_git.bb

@@ -0,0 +1,12 @@
+DESCRIPTION = "Kernel module for contiguous memory allocation from userspace"
+
+include cmem.inc
+
+# This package builds a kernel module, use kernel PR as base and append a local
+MACHINE_KERNEL_PR_append = "a+gitr${SRCPV}"
+PR = "${MACHINE_KERNEL_PR}"
+
+inherit module
+
+EXTRA_OEMAKE += '-f lu.mak KERNEL_INSTALL_DIR="${STAGING_KERNEL_DIR}" TOOLCHAIN_PREFIX="${TOOLCHAIN_PREFIX}" EXEC_DIR="${D}/lib/modules/${KERNEL_VERSION}/extra"'
+MAKE_TARGETS = "module"

recipes-bsp/cmem/cmem.inc

@@ -0,0 +1,12 @@
+HOMEPAGE = "http://processors.wiki.ti.com/index.php/Category:CMEM"
+
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://include/ti/cmem.h;beginline=1;endline=30;md5=b86138d4028fb8310b3b983024edc620"
+
+BRANCH ?= "master"
+# This corresponds to version 4.00.01.08
+SRCREV = "0b68dfe9f155a1978cdb2178e052dc0d6f1e705b"
+
+SRC_URI = "git://git.ti.com/ipc/ludev.git;protocol=git;branch=${BRANCH}"
+
+S = "${WORKDIR}/git"

recipes-bsp/cmem/cmem_git.bb

@@ -0,0 +1,13 @@
+DESCRIPTION = "The cmem component supports contiguous memory allocation from userspace"
+
+include cmem.inc
+
+RDEPENDS_${PN} = "cmem-mod"
+
+PR = "r0+gitr${SRCPV}"
+
+PACKAGES =+ "${PN}-test"
+
+FILES_${PN}-test = "${bindir}/*"
+
+inherit autotools

recipes-bsp/formfactor/formfactor_0.0.bbappend

@@ -1,3 +1,2 @@
-THISDIR := "${@os.path.dirname(bb.data.getVar('FILE', d, True))}"
-FILESPATH =. "${@base_set_filespath(["${THISDIR}/${PN}"], d)}:"
-
+PRINC := "${@int(PRINC) + 1}"
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"

recipes-bsp/powervr-drivers/omap3-sgx-modules-x11_4.09.00.01.bb

@@ -0,0 +1,81 @@
+DESCRIPTION = "Kernel drivers for the PowerVR SGX chipset found in the omap3 SoCs (for X11)"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=ea5743acf520dd81ca172e69f818a3d4"
+
+TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
+require ../../recipes-ti/includes/ti-eula-unpack.inc
+
+SGXPV = "4_09_00_01"
+IMGPV = "1.9.2188537"
+
+inherit module
+
+MACHINE_KERNEL_PR_append = "d"
+PR = "${MACHINE_KERNEL_PR}"
+
+# Select the corresponding hardfp/softfp filename and checksums based on tune flags
+BINFILE_SOFTFP = "Graphics_SDK_setuplinux_${SGXPV}_minimal_demos.bin"
+MD5SUM_SOFTFP = "bd35e9d8843aff3a2aca9d41e7db1c7d"
+SHA256SUM_SOFTFP = "eb37f75ddde4640b09e760fa86e689beb394330ecdf68786188c34f249247647"
+
+BINFILE_HARDFP = "Graphics_SDK_setuplinux_${SGXPV}_hardfp_minimal_demos.bin"
+MD5SUM_HARDFP = "c9f656dce062d1ab10afffd4dfb71b67"
+SHA256SUM_HARDFP = "dbfeba8e1298f139495816334edec1455e6b49b1e11bd1b2aa0a888e5788bb6b"
+
+BINFILE = "${@base_contains('TUNE_FEATURES', 'callconvention-hard', '${BINFILE_HARDFP}', '${BINFILE_SOFTFP}', d)}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE}"
+
+SRC_URI[md5sum] := "${@base_contains('TUNE_FEATURES', 'callconvention-hard', '${MD5SUM_HARDFP}', '${MD5SUM_SOFTFP}', d)}"
+SRC_URI[sha256sum] := "${@base_contains('TUNE_FEATURES', 'callconvention-hard', '${SHA256SUM_HARDFP}', '${SHA256SUM_SOFTFP}', d)}"
+
+TI_BIN_UNPK_WDEXT="/Graphics_SDK_${SGXPV}"
+S = "${WORKDIR}${TI_BIN_UNPK_WDEXT}/GFX_Linux_KM"
+
+PVRBUILD = "release"
+export KERNELDIR = "${STAGING_KERNEL_DIR}"
+
+INHIBIT_PACKAGE_STRIP = "1"
+
+TI_PLATFORM_omap3 = "omap3630"
+TI_PLATFORM_ti814x = "ti81xx"
+TI_PLATFORM_ti816x = "ti81xx"
+TI_PLATFORM_ti33x = "ti335x"
+
+MODULESLOCATION_omap3 = "dc_omapfb3_linux"
+MODULESLOCATION_ti814x = "dc_ti81xx_linux"
+MODULESLOCATION_ti816x = "dc_ti81xx_linux"
+MODULESLOCATION_ti33x = "dc_ti335x_linux"
+
+export SUPPORT_XORG ?= "1"
+
+MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=${SUPPORT_XORG}"
+
+do_compile() {
+	export TOOLCHAIN="${TOOLCHAIN_PATH}"
+	export PLAT_CC="${CC}"
+	export PLAT_CPP="${CXX}"
+	export PLAR_AR="${AR}"
+	for kernelver in ${WORKDIR}/../../${PREFERRED_PROVIDER_virtual/kernel}/* ; do
+		cp -f $kernelver/git/drivers/gpu/drm/*.c ${S}/services4/3rdparty/linux_drm/
+	done
+	if [ $(echo -e "${KERNEL_VERSION}\n3.3" | sort --version-sort | head -1) = "3.3" ] ; then
+		cp -f ${S}/services4/3rdparty/linux_drm/Kbuild_3.3 \
+			${S}/services4/3rdparty/linux_drm/Kbuild || true
+	else 
+		if [ $(echo -e "${KERNEL_VERSION}\n3.2" | sort --version-sort | head -1) = "3.2" ] ; then
+			cp -f ${S}/services4/3rdparty/linux_drm/Kbuild_3.2 \
+				${S}/services4/3rdparty/linux_drm/Kbuild || true
+		fi
+	fi
+	oe_runmake BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=${SUPPORT_XORG}
+}
+
+do_install() {
+    mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+    cp  ${S}/pvrsrvkm.ko \
+         ${S}/services4/3rdparty/bufferclass_ti/bufferclass_ti.ko \
+        ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+
+    cp ${S}/services4/3rdparty/linux_drm/drm.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+}

recipes-bsp/powervr-drivers/omap3-sgx-modules/kernel-30.patch

@@ -1,38 +1,38 @@
-From: Steve Sakoman
-Subject: omap3-sgx-modules: Fix build for Linux 3.0
-
-This patch implements the header change from plat/display.h to video/omapdss.h
-
-Signed-off-by: Steve Sakoman <steve@sakoman.com>
-
---- GFX_Linux_KM/services4/3rdparty/dc_omap3430_linux/omaplfb_linux.c-orig	2011-08-01 07:21:45.000000000 -0700
-+++ GFX_Linux_KM/services4/3rdparty/dc_omap3430_linux/omaplfb_linux.c	2011-08-01 07:29:32.000000000 -0700
-@@ -47,12 +47,12 @@
- #if defined (SUPPORT_TI_DSS_FW)
- #include <asm/io.h>
- 
--#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,26))
--#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,31))
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,39)))
-+#include <video/omapdss.h>
-+#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,31))
- #include <plat/display.h>
--#else 
-+#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,26))
- #include <mach/display.h>
--#endif 
- #else 
- #include <asm/arch-omap/display.h>
- #endif 
-@@ -64,7 +64,11 @@ extern int omap_dispc_request_irq(unsign
- extern void omap_dispc_free_irq(unsigned long, void (*)(void *), void *);
- extern void omap_dispc_set_plane_base(int plane, IMG_UINT32 phys_addr);
- #else
-+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,39))
-+#include <video/omapdss.h>
-+#else
- #include <plat/display.h>
-+#endif
- #include <linux/console.h>
- #include <linux/fb.h>
- static omap_dispc_isr_t *pOMAPLFBVSyncISRHandle = NULL;
+From: Steve Sakoman
+Subject: omap3-sgx-modules: Fix build for Linux 3.0
+
+This patch implements the header change from plat/display.h to video/omapdss.h
+
+Signed-off-by: Steve Sakoman <steve at sakoman.com>
+
+--- GFX_Linux_KM/services4/3rdparty/dc_omap3430_linux/omaplfb_linux.c-orig	2011-08-01 07:21:45.000000000 -0700
++++ GFX_Linux_KM/services4/3rdparty/dc_omap3430_linux/omaplfb_linux.c	2011-08-01 07:29:32.000000000 -0700
+@@ -47,12 +47,12 @@
+ #if defined (SUPPORT_TI_DSS_FW)
+ #include <asm/io.h>
+ 
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,26))
+-#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,31))
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,39)))
++#include <video/omapdss.h>
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,31))
+ #include <plat/display.h>
+-#else 
++#elif (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,26))
+ #include <mach/display.h>
+-#endif 
+ #else 
+ #include <asm/arch-omap/display.h>
+ #endif 
+@@ -64,7 +64,11 @@ extern int omap_dispc_request_irq(unsign
+ extern void omap_dispc_free_irq(unsigned long, void (*)(void *), void *);
+ extern void omap_dispc_set_plane_base(int plane, IMG_UINT32 phys_addr);
+ #else
++#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,6,39))
++#include <video/omapdss.h>
++#else
+ #include <plat/display.h>
++#endif
+ #include <linux/console.h>
+ #include <linux/fb.h>
+ static omap_dispc_isr_t *pOMAPLFBVSyncISRHandle = NULL;

recipes-bsp/powervr-drivers/omap3-sgx-modules_1.6.16.3977.bb

@@ -1,45 +0,0 @@
-DESCRIPTION = "Kernel drivers for the PowerVR SGX chipset found in the omap3 SoCs"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=21228a42e27d1d104b31a83f7c9da935"
-
-TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
-require ../../recipes-ti/includes/ti-eula-unpack.inc
-
-SGXPV = "4_03_00_02"
-IMGPV = "1.6.16.3977"
-BINFILE := "Graphics_SDK_setuplinux_${SGXPV}.bin"
-
-inherit module
-
-MACHINE_KERNEL_PR_append = "b"
-PR = "${MACHINE_KERNEL_PR}"
-
-SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE} \
-           file://Compile-fixes-for-38-kernel.patch \
-           file://kernel-30.patch \
-          "
-SRC_URI[md5sum] = "ff8c1f2b8e4cb42f4ced6a613b081ada"
-SRC_URI[sha256sum] = "cdb0bd3964e107733d632aa8224e0537b05c1ffac34befc036423458c8d75255"
-TI_BIN_UNPK_WDEXT="/Graphics_SDK_${SGXPV}"
-S = "${WORKDIR}${TI_BIN_UNPK_WDEXT}/GFX_Linux_KM"
-
-PVRBUILD = "release"
-export KERNELDIR = "${STAGING_KERNEL_DIR}"
-
-INHIBIT_PACKAGE_STRIP = "1"
-
-TI_PLATFORM_omap3 = "omap3630"
-TI_PLATFORM_ti816x = "ti81xx"
-
-MODULESLOCATION_omap3 = "dc_omap3430_linux"
-MODULESLOCATION_ti816x = "dc_ti81xx_linux"
-
-MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM}"
-
-do_install() {
-	mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
-	cp ${S}/pvrsrvkm.ko \
-	   ${S}/services4/3rdparty/${MODULESLOCATION}/omaplfb.ko  \
-	   ${S}/services4/3rdparty/bufferclass_ti/bufferclass_ti.ko \
-	   ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
-}

recipes-bsp/powervr-drivers/omap3-sgx-modules_4.05.00.03.bb

@@ -13,6 +13,8 @@ inherit module
 MACHINE_KERNEL_PR_append = "b"
 PR = "${MACHINE_KERNEL_PR}"
 
+DEFAULT_PREFERENCE_omap3 = "99"
+
 SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/Graphics_SDK_setuplinux_${SGXPV}.bin \
           "
 SRC_URI[md5sum] = "0e651eaa92bb91760f0b40a17697a7dc"

recipes-bsp/powervr-drivers/omap3-sgx-modules_4.08.00.01.bb

@@ -14,8 +14,6 @@ inherit module
 MACHINE_KERNEL_PR_append = "a"
 PR = "${MACHINE_KERNEL_PR}"
 
-DEFAULT_PREFERENCE = "-1"
-
 SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE}"
 
 SRC_URI[md5sum] = "dd0d994a48ecc4293f272a1fddddf159"

recipes-bsp/powervr-drivers/omap3-sgx-modules_4.08.00.02.bb

@@ -14,8 +14,6 @@ inherit module
 MACHINE_KERNEL_PR_append = "a"
 PR = "${MACHINE_KERNEL_PR}"
 
-DEFAULT_PREFERENCE = "-1"
-
 SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE}"
 
 SRC_URI[md5sum] = "0efa3a38266e6f41f8cc4fad0187f0d6"

recipes-bsp/powervr-drivers/omap3-sgx-modules_4.09.00.01.bb

@@ -7,19 +7,29 @@ require ../../recipes-ti/includes/ti-eula-unpack.inc
 
 SGXPV = "4_09_00_01"
 IMGPV = "1.9.2188537"
-BINFILE = "Graphics_SDK_setuplinux_${SGXPV}_minimal_demos.bin"
 
 inherit module
 
-MACHINE_KERNEL_PR_append = "a"
+MACHINE_KERNEL_PR_append = "c"
 PR = "${MACHINE_KERNEL_PR}"
 
 DEFAULT_PREFERENCE = "-1"
 
+# Select the corresponding hardfp/softfp filename and checksums based on tune flags
+BINFILE_SOFTFP = "Graphics_SDK_setuplinux_${SGXPV}_minimal_demos.bin"
+MD5SUM_SOFTFP = "bd35e9d8843aff3a2aca9d41e7db1c7d"
+SHA256SUM_SOFTFP = "eb37f75ddde4640b09e760fa86e689beb394330ecdf68786188c34f249247647"
+
+BINFILE_HARDFP = "Graphics_SDK_setuplinux_${SGXPV}_hardfp_minimal_demos.bin"
+MD5SUM_HARDFP = "c9f656dce062d1ab10afffd4dfb71b67"
+SHA256SUM_HARDFP = "dbfeba8e1298f139495816334edec1455e6b49b1e11bd1b2aa0a888e5788bb6b"
+
+BINFILE = "${@base_contains('TUNE_FEATURES', 'callconvention-hard', '${BINFILE_HARDFP}', '${BINFILE_SOFTFP}', d)}"
+
 SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE}"
 
-SRC_URI[md5sum] = "bd35e9d8843aff3a2aca9d41e7db1c7d"
-SRC_URI[sha256sum] = "eb37f75ddde4640b09e760fa86e689beb394330ecdf68786188c34f249247647"
+SRC_URI[md5sum] := "${@base_contains('TUNE_FEATURES', 'callconvention-hard', '${MD5SUM_HARDFP}', '${MD5SUM_SOFTFP}', d)}"
+SRC_URI[sha256sum] := "${@base_contains('TUNE_FEATURES', 'callconvention-hard', '${SHA256SUM_HARDFP}', '${SHA256SUM_SOFTFP}', d)}"
 
 TI_BIN_UNPK_WDEXT="/Graphics_SDK_${SGXPV}"
 S = "${WORKDIR}${TI_BIN_UNPK_WDEXT}/GFX_Linux_KM"
@@ -39,9 +49,9 @@ MODULESLOCATION_ti814x = "dc_ti81xx_linux"
 MODULESLOCATION_ti816x = "dc_ti81xx_linux"
 MODULESLOCATION_ti33x = "dc_ti335x_linux"
 
-export SUPPORT_XORG ?= "${@base_contains('DISTRO_FEATURES', 'x11', '1', '0', d)}"
+MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=0"
 
-MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=${SUPPORT_XORG}"
+MAKE_TARGETS_append_ti33x = " PM_RUNTIME=1"
 
 do_install() {
     mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
@@ -49,8 +59,4 @@ do_install() {
         ${S}/services4/3rdparty/${MODULESLOCATION}/omaplfb.ko  \
         ${S}/services4/3rdparty/bufferclass_ti/bufferclass_ti.ko \
         ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
-
-    if [ "${SUPPORT_XORG}" = "1" ]; then
-        cp ${S}/services4/3rdparty/linux_drm/drm.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
-    fi
 }

recipes-bsp/powervr-drivers/omap3-sgx-modules_5.00.00.01.bb

@@ -0,0 +1,67 @@
+DESCRIPTION = "Kernel drivers for the PowerVR SGX chipset found in the omap3 SoCs"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://GPL-COPYING;md5=60422928ba677faaa13d6ab5f5baaa1e"
+
+TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
+require ../../recipes-ti/includes/ti-eula-unpack.inc
+
+SGXPV = "5_00_00_01"
+IMGPV = "1.10.2359475"
+
+inherit module
+
+MACHINE_KERNEL_PR_append = "a"
+PR = "${MACHINE_KERNEL_PR}"
+
+BINFILE_HARDFP = "Graphics_SDK_setuplinux_${SGXPV}_alpha_hardfp_minimal_demos.bin"
+MD5SUM_HARDFP = "ae6125d7f8a313ea5c02afded893052d"
+SHA256SUM_HARDFP = "c2782a2f85024741722b936ec9dca66b858ae8561aa71b693f11e12d8c0385e0"
+
+# For now we only have hardfp version
+python __anonymous() {
+    tunes = bb.data.getVar("TUNE_FEATURES", d, 1)
+    if not tunes:
+        return
+    pkgn = bb.data.getVar("PN", d, 1)
+    pkgv = bb.data.getVar("PV", d, 1)
+    if "callconvention-hard" not in tunes:
+        bb.warn("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
+        raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
+}
+
+BINFILE := "${BINFILE_HARDFP}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/gfxsdk/${SGXPV}/exports/${BINFILE}"
+
+SRC_URI[md5sum] := "${MD5SUM_HARDFP}"
+SRC_URI[sha256sum] := "${SHA256SUM_HARDFP}"
+
+TI_BIN_UNPK_WDEXT="/Graphics_SDK_${SGXPV}"
+S = "${WORKDIR}${TI_BIN_UNPK_WDEXT}/GFX_Linux_KM"
+
+PVRBUILD = "release"
+export KERNELDIR = "${STAGING_KERNEL_DIR}"
+
+INHIBIT_PACKAGE_STRIP = "1"
+
+TI_PLATFORM_omap3 = "omap3630"
+TI_PLATFORM_ti814x = "ti81xx"
+TI_PLATFORM_ti816x = "ti81xx"
+TI_PLATFORM_ti33x = "ti335x"
+TI_PLATFORM_ti43x = "ti43xx"
+
+MODULESLOCATION_omap3 = "dc_omapfb3_linux"
+MODULESLOCATION_ti814x = "dc_ti81xx_linux"
+MODULESLOCATION_ti816x = "dc_ti81xx_linux"
+MODULESLOCATION_ti33x = "dc_ti335x_linux"
+MODULESLOCATION_ti43x = "dc_ti43xx_linux"
+
+MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=${SUPPORT_XORG}"
+
+do_install() {
+    mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+    cp  ${S}/pvrsrvkm.ko \
+        ${S}/services4/3rdparty/${MODULESLOCATION}/omaplfb.ko  \
+        ${S}/services4/3rdparty/bufferclass_ti/bufferclass_ti.ko \
+        ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+}

recipes-bsp/powervr-drivers/omap3-sgx-modules_5.01.00.01.bb

@@ -0,0 +1,67 @@
+DESCRIPTION = "Kernel drivers for the PowerVR SGX chipset found in the omap3 SoCs"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://GPL-COPYING;md5=60422928ba677faaa13d6ab5f5baaa1e"
+
+TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
+require ../../recipes-ti/includes/ti-eula-unpack.inc
+
+SGXPV = "5_01_00_01"
+IMGPV = "1.10.2359475"
+
+inherit module
+
+MACHINE_KERNEL_PR_append = "a"
+PR = "${MACHINE_KERNEL_PR}"
+
+BINFILE_HARDFP = "Graphics_SDK_setuplinux_hardfp_${SGXPV}.bin"
+MD5SUM_HARDFP = "0ee7d59808330d442a51c0990c2cb30e"
+SHA256SUM_HARDFP = "769daae439677a7a85bbbced14cee4f85b19823e0b99560078d0a864c525c128"
+
+# For now we only have hardfp version
+python __anonymous() {
+    tunes = bb.data.getVar("TUNE_FEATURES", d, 1)
+    if not tunes:
+        return
+    pkgn = bb.data.getVar("PN", d, 1)
+    pkgv = bb.data.getVar("PV", d, 1)
+    if "callconvention-hard" not in tunes:
+        bb.warn("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
+        raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
+}
+
+BINFILE := "${BINFILE_HARDFP}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/gfxsdk/${SGXPV}/exports/${BINFILE}"
+
+SRC_URI[md5sum] := "${MD5SUM_HARDFP}"
+SRC_URI[sha256sum] := "${SHA256SUM_HARDFP}"
+
+TI_BIN_UNPK_WDEXT="/Graphics_SDK_${SGXPV}"
+S = "${WORKDIR}${TI_BIN_UNPK_WDEXT}/GFX_Linux_KM"
+
+PVRBUILD = "release"
+export KERNELDIR = "${STAGING_KERNEL_DIR}"
+
+INHIBIT_PACKAGE_STRIP = "1"
+
+TI_PLATFORM_omap3 = "omap3630"
+TI_PLATFORM_ti814x = "ti81xx"
+TI_PLATFORM_ti816x = "ti81xx"
+TI_PLATFORM_ti33x = "ti335x"
+TI_PLATFORM_ti43x = "ti43xx"
+
+MODULESLOCATION_omap3 = "dc_omapfb3_linux"
+MODULESLOCATION_ti814x = "dc_ti81xx_linux"
+MODULESLOCATION_ti816x = "dc_ti81xx_linux"
+MODULESLOCATION_ti33x = "dc_ti335x_linux"
+MODULESLOCATION_ti43x = "dc_ti43xx_linux"
+
+MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=${SUPPORT_XORG}"
+
+do_install() {
+    mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+    cp  ${S}/pvrsrvkm.ko \
+        ${S}/services4/3rdparty/${MODULESLOCATION}/omaplfb.ko  \
+        ${S}/services4/3rdparty/bufferclass_ti/bufferclass_ti.ko \
+        ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+}

recipes-bsp/powervr-drivers/omap3-sgx-modules_5.01.01.01.bb

@@ -0,0 +1,67 @@
+DESCRIPTION = "Kernel drivers for the PowerVR SGX chipset found in the omap3 SoCs"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://GPL-COPYING;md5=60422928ba677faaa13d6ab5f5baaa1e"
+
+TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
+require ../../recipes-ti/includes/ti-eula-unpack.inc
+
+SGXPV = "5_01_01_01"
+IMGPV = "1.10.2359475"
+
+inherit module
+
+MACHINE_KERNEL_PR_append = "a"
+PR = "${MACHINE_KERNEL_PR}"
+
+BINFILE_HARDFP = "Graphics_SDK_setuplinux_hardfp_${SGXPV}.bin"
+MD5SUM_HARDFP = "94acdbd20152c905939c2448d5e80a72"
+SHA256SUM_HARDFP = "7f647bf45a5ce8ba9aaa28c4afe85fced4275f9a4567a1886d4460b76c9051ae"
+
+# For now we only have hardfp version
+python __anonymous() {
+    tunes = bb.data.getVar("TUNE_FEATURES", d, 1)
+    if not tunes:
+        return
+    pkgn = bb.data.getVar("PN", d, 1)
+    pkgv = bb.data.getVar("PV", d, 1)
+    if "callconvention-hard" not in tunes:
+        bb.warn("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
+        raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
+}
+
+BINFILE := "${BINFILE_HARDFP}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/gfxsdk/${SGXPV}/exports/${BINFILE}"
+
+SRC_URI[md5sum] := "${MD5SUM_HARDFP}"
+SRC_URI[sha256sum] := "${SHA256SUM_HARDFP}"
+
+TI_BIN_UNPK_WDEXT="/Graphics_SDK_${SGXPV}"
+S = "${WORKDIR}${TI_BIN_UNPK_WDEXT}/GFX_Linux_KM"
+
+PVRBUILD = "release"
+export KERNELDIR = "${STAGING_KERNEL_DIR}"
+
+INHIBIT_PACKAGE_STRIP = "1"
+
+TI_PLATFORM_omap3 = "omap3630"
+TI_PLATFORM_ti814x = "ti81xx"
+TI_PLATFORM_ti816x = "ti81xx"
+TI_PLATFORM_ti33x = "ti335x"
+TI_PLATFORM_ti43x = "ti43xx"
+
+MODULESLOCATION_omap3 = "dc_omapfb3_linux"
+MODULESLOCATION_ti814x = "dc_ti81xx_linux"
+MODULESLOCATION_ti816x = "dc_ti81xx_linux"
+MODULESLOCATION_ti33x = "dc_ti335x_linux"
+MODULESLOCATION_ti43x = "dc_ti43xx_linux"
+
+MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=${SUPPORT_XORG}"
+
+do_install() {
+    mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+    cp  ${S}/pvrsrvkm.ko \
+        ${S}/services4/3rdparty/${MODULESLOCATION}/omaplfb.ko  \
+        ${S}/services4/3rdparty/bufferclass_ti/bufferclass_ti.ko \
+        ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
+}

recipes-bsp/powervr-drivers/omapdrm-pvr_1.9.2253347.bb

@@ -0,0 +1,26 @@
+DESCRIPTION =  "Kernel drivers for the PowerVR SGX chipset found in the omap5 SoCs"
+HOMEPAGE = "http://git.ti.com"
+LICENSE = "MIT | GPLv2"
+LIC_FILES_CHKSUM = "file://README;beginline=13;endline=22;md5=74506d9b8e5edbce66c2747c50fcef12"
+
+inherit module
+
+MACHINE_KERNEL_PR_append = "a"
+PR = "${MACHINE_KERNEL_PR}"
+
+SRC_URI = "git://git.ti.com/graphics/omap5-sgx-ddk-linux.git;protocol=git"
+S = "${WORKDIR}/git"
+
+SRCREV = "86a4ffae3458c51f0a58e44b17b7a4fd92d2b8c6"
+
+EXTRA_OEMAKE += 'KERNELDIR="${STAGING_KERNEL_DIR}"'
+
+do_compile_prepend() {
+    cd ${S}/eurasiacon/build/linux2/omap5430_linux
+}
+
+do_install() {
+    mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/extra/
+    cp ${S}/eurasiacon/binary2_omap5430_linux_release/target/kbuild/omapdrm_pvr.ko \
+    ${D}/lib/modules/${KERNEL_VERSION}/extra/
+}

recipes-bsp/pru/ti-pru-sw-edma-driver_1.00.00.bb

@@ -7,7 +7,7 @@ COMPATIBLE_MACHINE = "omapl138"
 
 INHIBIT_PACKAGE_STRIP = "1"
 
-MACHINE_KERNEL_PR_append = "a+svnr${SRCPV}"
+MACHINE_KERNEL_PR_append = "b+svnr${SRCPV}"
 PR = "${MACHINE_KERNEL_PR}"
 
 SRC_URI = "svn://gforge.ti.com/svn/pru_sw/;module=trunk;protocol=https;user=anonymous;pswd=''"
@@ -28,5 +28,3 @@ do_install () {
         install -d ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/pru
         install -m 0755 ${S}/edmautils.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/pru/
 }
-
-FILES_${PN} = "/lib/modules/${KERNEL_VERSION}/kernel/drivers/pru/edmautils.ko"

recipes-bsp/ti-ocf-crypto-module/ti-ocf-crypto-module_1.0.bb

@@ -19,7 +19,7 @@ S = "${WORKDIR}/trunk"
 
 inherit module
 
-MACHINE_KERNEL_PR_append = "a+svnr${SRCPV}"
+MACHINE_KERNEL_PR_append = "b+svnr${SRCPV}"
 PR = "${MACHINE_KERNEL_PR}"
 
 EXTRA_OEMAKE += "KERNEL_DIR=${STAGING_KERNEL_DIR}"
@@ -32,5 +32,3 @@ do_install () {
         install -d ${D}/lib/modules/${KERNEL_VERSION}/crypto/ocf/
         install -m 0755 ${S}/ocf_omap3_cryptok.ko ${D}/lib/modules/${KERNEL_VERSION}/crypto/ocf/
 }
-
-FILES_${PN} = "/lib/modules/${KERNEL_VERSION}/crypto/ocf/ocf_omap3_cryptok.ko"

recipes-bsp/ti/am33x-cm3/init-am43x-cm3

@@ -0,0 +1,6 @@
+#!/bin/sh
+
+# Load the PM CM3 firmware
+echo 1 > /sys/devices/44000000.ocp/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/loading
+cat /lib/firmware/am335x-pm-firmware.bin > /sys/devices/44000000.ocp/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/data
+echo 0 > /sys/devices/44000000.ocp/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/loading

recipes-bsp/ti/am33x-cm3_git.bb

@@ -1,15 +1,21 @@
 DESCRIPTION = "Cortex-M3 binary blob for suspend-resume"
 
-LICENSE = "TI-BSD"
-LIC_FILES_CHKSUM = "file://License.txt;md5=858099c817e47ea63559fc6b67ae8d91"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://License.txt;md5=7bdc54a749ab7a7dea999d25d99a41b8"
 
-PV = "04.06.00.11"
-PR = "r4"
+PV = "05.00.00.03"
+PR = "r1"
 
-# SRCREV corresponds to tag "AM335xPSP_04.06.00.11"
-SRCREV = "750362868d914702086187096ec2c67b68eac101"
+# Make package machine specific due to different init scripts
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+# SRCREV corresponds to tag v05.00.00.03
+SRCREV = "a0ddffb63147e2079a08944c0e399c75538201a9"
 BRANCH ?= "master"
 
+# This init script is only used for older kernels that do not support
+# hotplug of the firmware.  Newer kernels do not require the initscript
+# package.
 INITSCRIPT_NAME = "am335x-pm-firmware-load"
 INITSCRIPT_PARAMS = "defaults 96"
 
@@ -21,12 +27,16 @@ RDEPENDS_${PN}-initscript = "am33x-cm3"
 
 SRC_URI = "git://arago-project.org/git/projects/am33x-cm3.git;protocol=git;branch=${BRANCH} \
            file://init-am33x-cm3 \
+           file://init-am43x-cm3 \
           "
 
+SCRIPT_ti33x = "init-am33x-cm3"
+SCRIPT_ti43x = "init-am43x-cm3"
+
 S = "${WORKDIR}/git"
 
 do_compile() {
-	make CC="${TARGET_CC}" CROSS_COMPILE="${TARGET_PREFIX}"
+	make CROSS_COMPILE="${TARGET_PREFIX}"
 }
 
 do_install() {
@@ -35,7 +45,7 @@ do_install() {
 
 	# Install the init script to load the PM firmware at boot
 	install -d ${D}${sysconfdir}/init.d
-	install -m 0755 ${WORKDIR}/init-am33x-cm3 ${D}${sysconfdir}/init.d/${INITSCRIPT_NAME}
+	install -m 0755 ${WORKDIR}/${SCRIPT} ${D}${sysconfdir}/init.d/${INITSCRIPT_NAME}
 }
 
 PACKAGES =+ "${PN}-initscript"

recipes-bsp/ti/vpe-vpdma_git.bb

@@ -0,0 +1,29 @@
+DESCRIPTION = "VPE VPDMA firmware and test program"
+
+DEPENDS += "virtual/kernel"
+
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://COPYING;md5=74d2f71d8898c54e3d1c9d0058c484aa"
+
+COMPATIBLE_MACHINE = "dra7xx-evm"
+
+PV = "1b8"
+PR = "r1"
+
+SRCREV = "e3d8db1aa935775f9d196ad7428e0cd9864a36ca"
+BRANCH ?= "master"
+
+SRC_URI = "git://git.ti.com/vpe_tests/vpe_tests.git;protocol=git;branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
+
+# The test application needs additional include headers from the kernel
+EXTRA_OEMAKE = 'CROSS_COMPILE="${TARGET_PREFIX}" KDIR="${STAGING_KERNEL_DIR}/include/uapi -I${STAGING_KERNEL_DIR}/include"'
+
+do_install() {
+    oe_runmake DESTDIR="${D}" install
+}
+
+# Separate the firmware into it's own package.
+PACKAGES =+ "${PN}-fw"
+FILES_${PN}-fw += "${base_libdir}/firmware"

recipes-bsp/u-boot/u-boot-dra7xx_2013.04.bb

@@ -1,16 +0,0 @@
-require u-boot-ti.inc
-
-DESCRIPTION = "u-boot bootloader for TI devices"
-
-COMPATIBLE_MACHINE = "dra7xx-evm"
-
-PR = "r1+gitr${SRCPV}"
-
-SRC_URI = "git://git.ti.com/ti-u-boot/ti-u-boot.git;protocol=git;branch=${BRANCH}"
-
-BRANCH ?= "ti-u-boot-2013.04+"
-
-# This commit corresponds to ti2013.04.02 release tag
-SRCREV = "ca435c914e069f5b74f05f667e2064784943a0ac"
-
-SPL_BINARY = "MLO"

recipes-bsp/u-boot/u-boot-glsdk_2013.01.01.bb

@@ -2,15 +2,15 @@ require u-boot-ti.inc
 
 DESCRIPTION = "u-boot bootloader for TI devices supported by the GLSDK product"
 
-PR = "r0+gitr${SRCPV}"
+PR = "r1+gitr${SRCPV}"
 
 DEFAULT_PREFERENCE = "-1"
 
-SRC_URI = "git://git.ti.com/glsdk/glsdk-u-boot.git;protocol=git;branch=${BRANCH}"
+SRC_URI = "git://git.omapzoom.org/repo/u-boot.git;protocol=git;branch=${BRANCH}"
 
-BRANCH ?= "master"
+BRANCH ?= "p-ti-u-boot-2013.04"
 
-SRCREV = "81836e8cc84bd6523d9a4e187965dcd1633c4bc9"
+SRCREV = "76447484441a4b8e00840a2bde74e66dbac9e631"
 
 SPL_BINARY = "MLO"
 SPL_UART_BINARY = "u-boot-spl.bin"

recipes-bsp/u-boot/u-boot-keystone_2013.01.bb

@@ -4,13 +4,67 @@ DESCRIPTION = "u-boot bootloader for Multi-Core BU devices"
 
 COMPATIBLE_MACHINE = "keystone"
 
-PR = "r2+gitr${SRCPV}"
-
-SRC_URI = "git://arago-project.org/git/projects/u-boot-keystone.git;protocol=git;branch=${BRANCH}"
+PR = "r5+gitr${SRCPV}"
 
+# Tag "K2_UBOOT_2013_01_14.05_16"
+SRCREV = "fee500417b989fc9906d86e377b4d3d96033d54e"
 BRANCH = "master"
 
-# DEV.MCSDK-03.00.00.07
-SRCREV = "82f40e857d853165310d0753e79235aefb65d7ba"
+SRC_URI = "git://git.ti.com/keystone-linux/u-boot.git;protocol=git;branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
 
 UBOOT_SUFFIX = "bin"
+UBOOT_MAKE_TARGET = "u-boot-spi.gph u-boot-nand.gph"
+
+# SPI NOR Flash binaries
+UBOOT_SPI_SPL_BINARY = "u-boot-spl.bin"
+UBOOT_SPI_BINARY = "u-boot.img"
+UBOOT_SPI_GPH_BINARY = "u-boot-spi.gph"
+UBOOT_NAND_GPH_BINARY = "u-boot-nand.gph"
+
+# SPI NOR Flash deployed images
+UBOOT_SPI_SPL_IMAGE = "u-boot-spl-${MACHINE}-${PV}-${PR}.bin"
+UBOOT_SPI_SPL_SYMLINK = "u-boot-spl-${MACHINE}.bin"
+UBOOT_SPI_IMAGE = "u-boot-${MACHINE}-${PV}-${PR}.img"
+UBOOT_SPI_SYMLINK = "u-boot-${MACHINE}.img"
+UBOOT_SPI_GPH_IMAGE = "u-boot-spi-${MACHINE}-${PV}-${PR}.gph"
+UBOOT_SPI_GPH_SYMLINK = "u-boot-spi-${MACHINE}.gph"
+UBOOT_NAND_GPH_IMAGE = "u-boot-nand-${MACHINE}-${PV}-${PR}.gph"
+UBOOT_NAND_GPH_SYMLINK = "u-boot-nand-${MACHINE}.gph"
+
+do_install_append () {
+	install ${S}/spl/${UBOOT_SPI_SPL_BINARY} ${D}/boot/${UBOOT_SPI_SPL_IMAGE}
+	ln -sf ${UBOOT_SPI_SPL_IMAGE} ${D}/boot/${UBOOT_SPI_SPL_BINARY}
+
+	install ${S}/${UBOOT_SPI_BINARY} ${D}/boot/${UBOOT_SPI_IMAGE}
+	ln -sf ${UBOOT_SPI_IMAGE} ${D}/boot/${UBOOT_SPI_BINARY}
+
+	install ${S}/${UBOOT_SPI_GPH_BINARY} ${D}/boot/${UBOOT_SPI_GPH_IMAGE}
+	ln -sf ${UBOOT_SPI_GPH_IMAGE} ${D}/boot/${UBOOT_SPI_GPH_BINARY}
+
+        install ${S}/${UBOOT_NAND_GPH_BINARY} ${D}/boot/${UBOOT_NAND_GPH_IMAGE}
+        ln -sf ${UBOOT_NAND_GPH_IMAGE} ${D}/boot/${UBOOT_NAND_GPH_BINARY}
+}
+
+do_deploy_append () {
+	install ${S}/spl/${UBOOT_SPI_SPL_BINARY} ${DEPLOYDIR}/${UBOOT_SPI_SPL_IMAGE}
+	rm -f ${UBOOT_SPI_SPL_BINARY} ${UBOOT_SPI_SPL_SYMLINK}
+	ln -sf ${UBOOT_SPI_SPL_IMAGE} ${UBOOT_SPI_SPL_SYMLINK}
+	ln -sf ${UBOOT_SPI_SPL_IMAGE} ${UBOOT_SPI_SPL_BINARY}
+
+	install ${S}/${UBOOT_SPI_BINARY} ${DEPLOYDIR}/${UBOOT_SPI_IMAGE}
+	rm -f ${UBOOT_SPI_BINARY} ${UBOOT_SPI_SYMLINK}
+	ln -sf ${UBOOT_SPI_IMAGE} ${UBOOT_SPI_SYMLINK}
+	ln -sf ${UBOOT_SPI_IMAGE} ${UBOOT_SPI_BINARY}
+
+	install ${S}/${UBOOT_SPI_GPH_BINARY} ${DEPLOYDIR}/${UBOOT_SPI_GPH_IMAGE}
+	rm -f ${UBOOT_SPI_GPH_BINARY} ${UBOOT_SPI_GPH_SYMLINK}
+	ln -sf ${UBOOT_SPI_GPH_IMAGE} ${UBOOT_SPI_GPH_SYMLINK}
+	ln -sf ${UBOOT_SPI_GPH_IMAGE} ${UBOOT_SPI_GPH_BINARY}
+
+        install ${S}/${UBOOT_NAND_GPH_BINARY} ${DEPLOYDIR}/${UBOOT_NAND_GPH_IMAGE}
+        rm -f ${UBOOT_NAND_GPH_BINARY} ${UBOOT_NAND_GPH_SYMLINK}
+        ln -sf ${UBOOT_NAND_GPH_IMAGE} ${UBOOT_NAND_GPH_SYMLINK}
+        ln -sf ${UBOOT_NAND_GPH_IMAGE} ${UBOOT_NAND_GPH_BINARY}
+}

recipes-bsp/u-boot/u-boot-ti-staging_2013.10.bb

@@ -0,0 +1,18 @@
+require u-boot-ti.inc
+
+DESCRIPTION = "u-boot bootloader for TI devices"
+
+LIC_FILES_CHKSUM = "file://Licenses/README;md5=025bf9f768cbcb1a165dbe1a110babfb"
+
+PV = "2013.10"
+PR = "r8+gitr${SRCPV}"
+
+SRC_URI = "git://git.ti.com/ti-u-boot/ti-u-boot.git;protocol=git;branch=${BRANCH}"
+
+BRANCH ?= "ti-u-boot-2013.10"
+
+# Corresponds to tag ti2013.12.01_amsdk-07.01
+SRCREV = "259ff9a577cc66cb40e3cdff3e41628e466f0fef"
+
+SPL_BINARY = "MLO"
+SPL_UART_BINARY = "u-boot-spl.bin"

recipes-core/packagegroups/packagegroup-ti-test.bb

@@ -1,8 +1,8 @@
 DESCRIPTION = "Extended task to get System Test specific apps"
 LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://${COREBASE}/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58"
+PR = "r1"
 
-inherit allarch packagegroup
+inherit packagegroup
 
 TEST = "\
     bonnie++ \
@@ -11,6 +11,9 @@ TEST = "\
     iperf \
     lmbench \
     rt-tests \
+    evtest \
+    bc \
+    memtester \
     "
 
 TI_TEST = "\
@@ -21,4 +24,3 @@ RDEPENDS_${PN} = "\
     ${TEST} \
     ${TI_TEST} \
     "
-

recipes-graphics/bltsville/bltsville_git.bb

@@ -0,0 +1,22 @@
+DESCRIPTION = "Userspace libraries and headers for TI BLTsville implementation"
+HOMEPAGE = "http://omapzoom.org/?p=platform/external/bltsville.git;a=summary"
+LICENSE = "BSD-3-Clause & TI-TSPA"
+LIC_FILES_CHKSUM = "file://COPYING;md5=10a9abb9c5bb19edd83a8cf66eef7148 \
+                    file://ticpu/license;md5=0bb831850a0de80e32a63772d89c6562"
+
+PR = "r2"
+
+SRCREV = "016586280ecdae201fd6e340ec8c4f8a9605cc94"
+
+inherit autotools pkgconfig
+
+SRC_URI = "git://git.omapzoom.org/platform/external/bltsville.git;protocol=git"
+
+S = "${WORKDIR}/git"
+
+do_configure() {
+	chmod +x autogen.sh
+	./autogen.sh --prefix=${prefix} --with-libtool-sysroot=${STAGING_DIR_TARGET}
+}
+
+FILES_${PN} += "${libdir}/libbltsville_ticpu_license.txt"   

recipes-graphics/drm/libdrm_2.4.39.bbappend

@@ -1,3 +0,0 @@
-COMPATIBLE_MACHINE = "omap4|omap-a15"
-
-EXTRA_OECONF += "--enable-omap-experimental-api"

recipes-graphics/libgles/libgles-omap3-5.00.00.01/rc.pvr

@@ -0,0 +1,134 @@
+#!/bin/sh
+PATH=$PATH:/usr/sbin
+
+# Check if an fb device is available.  If not then just go ahead and
+# exit because we have no display.
+fbset > /dev/null 2>&1
+if [ "$?" == "1" ]
+then
+	# looks like there is no display, so let's exit
+	exit 0
+fi
+
+BITSPERPIXEL="$(fbset | grep geom | awk '{print $6}')"
+YRES="$(fbset | grep geom | awk '{print $3}')"
+
+CPUTYPE="$(cputype)"
+
+if [ "$1" = "" ]; then
+	echo PVR-INIT: Please use start, stop, or restart.
+	exit 1
+fi
+
+if [ "$1" = "stop" -o  "$1" = "restart" ]; then
+	echo Stopping PVR
+	rmmod bufferclass_ti
+	rmmod omaplfb 2>/dev/null
+	rmmod pvrsrvkm 2>/dev/null
+fi
+
+if [ "$1" = "stop" ]; then
+	exit 0
+fi
+
+# Set RGBA ordering to something the drivers like
+if [ "$BITSPERPIXEL" = "32" ] ; then
+	fbset -rgba 8/16,8/8,8/0,8/24
+fi
+
+# Try to enable triple buffering when there's enough VRAM
+fbset -vyres $(expr $YRES \* 3)
+
+sgxprepare () {
+	echo Starting PVR
+
+	lsmod | grep pvrsrvkm > /dev/null
+
+	if [ "$?" != "0" ]
+	then
+		insmod $(busybox find /lib/modules/$(uname -r) -name "pvrsrvkm.ko")
+
+		if [ "$?" != "0" ]
+		then
+			echo "Could not find pvrsrvkm driver"
+			exit 1
+		fi
+	fi
+
+	modprobe omaplfb
+	modprobe bufferclass_ti
+
+	pvr_maj=`grep "pvrsrvkm$" /proc/devices | cut -b1,2,3`
+	bc_maj=`grep "bc" /proc/devices | cut -b1,2,3`
+
+	if [ -e /dev/pvrsrvkm ] ; then
+		rm -f /dev/pvrsrvkm
+	fi
+
+	mknod /dev/pvrsrvkm c $pvr_maj 0
+	chmod 666 /dev/pvrsrvkm
+
+	touch /etc/powervr-esrev
+
+	SAVED_ESREVISION="$(cat /etc/powervr-esrev)"
+}
+
+sgxfinish () {
+	# Fix up a bug in opkg
+	if [ $(readlink /usr/lib/libsrv_um.so) != $(readlink /usr/lib/libsrv_um.so.1) ] ; then
+		cd /usr/lib
+		ln -sf $(readlink /usr/lib/libsrv_um.so.1) libsrv_um.so
+	fi
+
+	if [ "${ES_REVISION}" != "${SAVED_ESREVISION}" ] ; then
+		echo -n "Starting SGX fixup for"
+		echo " ES${ES_REVISION}.x"
+		cp -a /usr/lib/ES${ES_REVISION}.0/* /usr/lib
+		cp -a /usr/bin/ES${ES_REVISION}.0/* /usr/bin
+		echo "${ES_REVISION}" > /etc/powervr-esrev
+	fi
+
+	if ! /usr/bin/pvrsrvctl --start --no-module; then return; fi
+}
+
+case $CPUTYPE in
+"OMAP3530")
+	sgxprepare
+
+	devmem2 0x48004B48 w 0x2 > /dev/null
+	devmem2 0x48004B10 w 0x1 > /dev/null
+	devmem2 0x48004B00 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x50000014 | sed -e s:0x00010205:5: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI33XX")
+	sgxprepare
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:8: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI43XX")
+	sgxprepare
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:8: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI816x")
+	sgxprepare
+
+	devmem2 0x48180F04 w 0x0 > /dev/null
+	devmem2 0x48180900 w 0x2 > /dev/null
+	devmem2 0x48180920 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:6: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+*)
+	echo No SGX hardware, not starting PVR
+	;;
+esac

recipes-graphics/libgles/libgles-omap3-5.00.00.01/rc_dri.pvr

@@ -0,0 +1,145 @@
+#!/bin/sh
+PATH=$PATH:/usr/sbin
+
+# Check if an fb device is available.  If not then just go ahead and
+# exit because we have no display.
+fbset > /dev/null 2>&1
+if [ "$?" == "1" ]
+then
+	# looks like there is no display, so let's exit
+	exit 0
+fi
+
+BITSPERPIXEL="$(fbset | grep geom | awk '{print $6}')"
+YRES="$(fbset | grep geom | awk '{print $3}')"
+
+CPUTYPE="$(cputype)"
+
+if [ "$1" = "" ]; then
+	echo PVR-INIT: Please use start, stop, or restart.
+	exit 1
+fi
+
+if [ "$1" = "stop" -o  "$1" = "restart" ]; then
+	echo Stopping PVR
+
+	# Stop the X Server.
+	#
+	[ -f /tmp/.X0-lock ] && read XPID < /tmp/.X0-lock && [ -n "$XPID" ] && kill $XPID && while [ -e /proc/$XPID ] ; do sleep 1; done
+
+	rmmod bufferclass_ti
+	rmmod pvrsrvkm 2>/dev/null
+	rmmod drm 2>/dev/null
+fi
+
+if [ "$1" = "stop" ]; then
+	exit 0
+fi
+
+# Set RGBA ordering to something the drivers like
+if [ "$BITSPERPIXEL" = "32" ] ; then
+	fbset -rgba 8/16,8/8,8/0,8/24
+fi
+
+# Try to enable triple buffering when there's enough VRAM
+fbset -vyres $(expr $YRES \* 3)
+
+sgxprepare () {
+	echo Starting PVR
+
+	# Start the X Server.
+	# The X Server will load the PVR Services module.
+	#
+	/usr/local/XSGX/bin/X -verbose -config /usr/local/XSGX/etc/xorg.conf &
+
+	modprobe drm
+
+	lsmod | grep pvrsrvkm > /dev/null
+
+	if [ "$?" != "0" ]
+	then
+		insmod $(busybox find /lib/modules/$(uname -r) -name "pvrsrvkm.ko")
+
+		if [ "$?" != "0" ]
+		then
+			echo "Could not find pvrsrvkm driver"
+			exit 1
+		fi
+	fi
+
+	modprobe bufferclass_ti
+
+	pvr_maj=`grep "pvrsrvkm$" /proc/devices | cut -b1,2,3`
+        bc_maj=`grep "bc" /proc/devices | cut -b1,2,3`
+
+	if [ -e /dev/pvrsrvkm ] ; then
+		rm -f /dev/pvrsrvkm
+	fi
+
+	mknod /dev/pvrsrvkm c $pvr_maj 0
+	chmod 666 /dev/pvrsrvkm
+
+	touch /etc/powervr-esrev
+
+	SAVED_ESREVISION="$(cat /etc/powervr-esrev)"
+}
+
+sgxfinish () {
+	# Fix up a bug in opkg
+	if [ $(readlink /usr/lib/libsrv_um.so) != $(readlink /usr/lib/libsrv_um.so.1) ] ; then
+		cd /usr/lib
+		ln -sf $(readlink /usr/lib/libsrv_um.so.1) libsrv_um.so
+	fi
+
+	if [ "${ES_REVISION}" != "${SAVED_ESREVISION}" ] ; then
+		echo -n "Starting SGX fixup for"
+		echo " ES${ES_REVISION}.x"
+		cp -a /usr/lib/ES${ES_REVISION}.0/* /usr/lib
+		cp -a /usr/bin/ES${ES_REVISION}.0/* /usr/bin
+		echo "${ES_REVISION}" > /etc/powervr-esrev
+	fi
+
+	if ! /usr/bin/pvrsrvctl --start --no-module; then return; fi
+}
+
+case $CPUTYPE in
+"OMAP3530")
+	sgxprepare
+
+	devmem2 0x48004B48 w 0x2 > /dev/null
+	devmem2 0x48004B10 w 0x1 > /dev/null
+	devmem2 0x48004B00 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x50000014 | sed -e s:0x00010205:5: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI33XX")
+	sgxprepare
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:8: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI43XX")
+	sgxprepare
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:8: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI816x")
+	sgxprepare
+
+	devmem2 0x48180F04 w 0x0 > /dev/null
+	devmem2 0x48180900 w 0x2 > /dev/null
+	devmem2 0x48180920 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:6: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+*)
+	echo No SGX hardware, not starting PVR
+	;;
+esac

recipes-graphics/libgles/libgles-omap3-5.01.00.01/rc.pvr

@@ -0,0 +1,134 @@
+#!/bin/sh
+PATH=$PATH:/usr/sbin
+
+# Check if an fb device is available.  If not then just go ahead and
+# exit because we have no display.
+fbset > /dev/null 2>&1
+if [ "$?" == "1" ]
+then
+	# looks like there is no display, so let's exit
+	exit 0
+fi
+
+BITSPERPIXEL="$(fbset | grep geom | awk '{print $6}')"
+YRES="$(fbset | grep geom | awk '{print $3}')"
+
+CPUTYPE="$(cputype)"
+
+if [ "$1" = "" ]; then
+	echo PVR-INIT: Please use start, stop, or restart.
+	exit 1
+fi
+
+if [ "$1" = "stop" -o  "$1" = "restart" ]; then
+	echo Stopping PVR
+	rmmod bufferclass_ti
+	rmmod omaplfb 2>/dev/null
+	rmmod pvrsrvkm 2>/dev/null
+fi
+
+if [ "$1" = "stop" ]; then
+	exit 0
+fi
+
+# Set RGBA ordering to something the drivers like
+if [ "$BITSPERPIXEL" = "32" ] ; then
+	fbset -rgba 8/16,8/8,8/0,8/24
+fi
+
+# Try to enable triple buffering when there's enough VRAM
+fbset -vyres $(expr $YRES \* 3)
+
+sgxprepare () {
+	echo Starting PVR
+
+	lsmod | grep pvrsrvkm > /dev/null
+
+	if [ "$?" != "0" ]
+	then
+		insmod $(busybox find /lib/modules/$(uname -r) -name "pvrsrvkm.ko")
+
+		if [ "$?" != "0" ]
+		then
+			echo "Could not find pvrsrvkm driver"
+			exit 1
+		fi
+	fi
+
+	modprobe omaplfb
+	modprobe bufferclass_ti
+
+	pvr_maj=`grep "pvrsrvkm$" /proc/devices | cut -b1,2,3`
+	bc_maj=`grep "bc" /proc/devices | cut -b1,2,3`
+
+	if [ -e /dev/pvrsrvkm ] ; then
+		rm -f /dev/pvrsrvkm
+	fi
+
+	mknod /dev/pvrsrvkm c $pvr_maj 0
+	chmod 666 /dev/pvrsrvkm
+
+	touch /etc/powervr-esrev
+
+	SAVED_ESREVISION="$(cat /etc/powervr-esrev)"
+}
+
+sgxfinish () {
+	# Fix up a bug in opkg
+	if [ $(readlink /usr/lib/libsrv_um.so) != $(readlink /usr/lib/libsrv_um.so.1) ] ; then
+		cd /usr/lib
+		ln -sf $(readlink /usr/lib/libsrv_um.so.1) libsrv_um.so
+	fi
+
+	if [ "${ES_REVISION}" != "${SAVED_ESREVISION}" ] ; then
+		echo -n "Starting SGX fixup for"
+		echo " ES${ES_REVISION}.x"
+		cp -a /usr/lib/ES${ES_REVISION}.0/* /usr/lib
+		cp -a /usr/bin/ES${ES_REVISION}.0/* /usr/bin
+		echo "${ES_REVISION}" > /etc/powervr-esrev
+	fi
+
+	if ! /usr/bin/pvrsrvctl --start --no-module; then return; fi
+}
+
+case $CPUTYPE in
+"OMAP3530")
+	sgxprepare
+
+	devmem2 0x48004B48 w 0x2 > /dev/null
+	devmem2 0x48004B10 w 0x1 > /dev/null
+	devmem2 0x48004B00 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x50000014 | sed -e s:0x00010205:5: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI33XX")
+	sgxprepare
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:8: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI43XX")
+	sgxprepare
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:8: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI816x")
+	sgxprepare
+
+	devmem2 0x48180F04 w 0x0 > /dev/null
+	devmem2 0x48180900 w 0x2 > /dev/null
+	devmem2 0x48180920 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:6: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+*)
+	echo No SGX hardware, not starting PVR
+	;;
+esac

recipes-graphics/libgles/libgles-omap3-5.01.00.01/rc_dri.pvr

@@ -0,0 +1,145 @@
+#!/bin/sh
+PATH=$PATH:/usr/sbin
+
+# Check if an fb device is available.  If not then just go ahead and
+# exit because we have no display.
+fbset > /dev/null 2>&1
+if [ "$?" == "1" ]
+then
+	# looks like there is no display, so let's exit
+	exit 0
+fi
+
+BITSPERPIXEL="$(fbset | grep geom | awk '{print $6}')"
+YRES="$(fbset | grep geom | awk '{print $3}')"
+
+CPUTYPE="$(cputype)"
+
+if [ "$1" = "" ]; then
+	echo PVR-INIT: Please use start, stop, or restart.
+	exit 1
+fi
+
+if [ "$1" = "stop" -o  "$1" = "restart" ]; then
+	echo Stopping PVR
+
+	# Stop the X Server.
+	#
+	[ -f /tmp/.X0-lock ] && read XPID < /tmp/.X0-lock && [ -n "$XPID" ] && kill $XPID && while [ -e /proc/$XPID ] ; do sleep 1; done
+
+	rmmod bufferclass_ti
+	rmmod pvrsrvkm 2>/dev/null
+	rmmod drm 2>/dev/null
+fi
+
+if [ "$1" = "stop" ]; then
+	exit 0
+fi
+
+# Set RGBA ordering to something the drivers like
+if [ "$BITSPERPIXEL" = "32" ] ; then
+	fbset -rgba 8/16,8/8,8/0,8/24
+fi
+
+# Try to enable triple buffering when there's enough VRAM
+fbset -vyres $(expr $YRES \* 3)
+
+sgxprepare () {
+	echo Starting PVR
+
+	# Start the X Server.
+	# The X Server will load the PVR Services module.
+	#
+	/usr/local/XSGX/bin/X -verbose -config /usr/local/XSGX/etc/xorg.conf &
+
+	modprobe drm
+
+	lsmod | grep pvrsrvkm > /dev/null
+
+	if [ "$?" != "0" ]
+	then
+		insmod $(busybox find /lib/modules/$(uname -r) -name "pvrsrvkm.ko")
+
+		if [ "$?" != "0" ]
+		then
+			echo "Could not find pvrsrvkm driver"
+			exit 1
+		fi
+	fi
+
+	modprobe bufferclass_ti
+
+	pvr_maj=`grep "pvrsrvkm$" /proc/devices | cut -b1,2,3`
+        bc_maj=`grep "bc" /proc/devices | cut -b1,2,3`
+
+	if [ -e /dev/pvrsrvkm ] ; then
+		rm -f /dev/pvrsrvkm
+	fi
+
+	mknod /dev/pvrsrvkm c $pvr_maj 0
+	chmod 666 /dev/pvrsrvkm
+
+	touch /etc/powervr-esrev
+
+	SAVED_ESREVISION="$(cat /etc/powervr-esrev)"
+}
+
+sgxfinish () {
+	# Fix up a bug in opkg
+	if [ $(readlink /usr/lib/libsrv_um.so) != $(readlink /usr/lib/libsrv_um.so.1) ] ; then
+		cd /usr/lib
+		ln -sf $(readlink /usr/lib/libsrv_um.so.1) libsrv_um.so
+	fi
+
+	if [ "${ES_REVISION}" != "${SAVED_ESREVISION}" ] ; then
+		echo -n "Starting SGX fixup for"
+		echo " ES${ES_REVISION}.x"
+		cp -a /usr/lib/ES${ES_REVISION}.0/* /usr/lib
+		cp -a /usr/bin/ES${ES_REVISION}.0/* /usr/bin
+		echo "${ES_REVISION}" > /etc/powervr-esrev
+	fi
+
+	if ! /usr/bin/pvrsrvctl --start --no-module; then return; fi
+}
+
+case $CPUTYPE in
+"OMAP3530")
+	sgxprepare
+
+	devmem2 0x48004B48 w 0x2 > /dev/null
+	devmem2 0x48004B10 w 0x1 > /dev/null
+	devmem2 0x48004B00 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x50000014 | sed -e s:0x00010205:5: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI33XX")
+	sgxprepare
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:8: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI43XX")
+	sgxprepare
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:8: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI816x")
+	sgxprepare
+
+	devmem2 0x48180F04 w 0x0 > /dev/null
+	devmem2 0x48180900 w 0x2 > /dev/null
+	devmem2 0x48180920 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:6: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+*)
+	echo No SGX hardware, not starting PVR
+	;;
+esac

recipes-graphics/libgles/libgles-omap3-5.01.01.01/rc.pvr

@@ -0,0 +1,134 @@
+#!/bin/sh
+PATH=$PATH:/usr/sbin
+
+# Check if an fb device is available.  If not then just go ahead and
+# exit because we have no display.
+fbset > /dev/null 2>&1
+if [ "$?" == "1" ]
+then
+	# looks like there is no display, so let's exit
+	exit 0
+fi
+
+BITSPERPIXEL="$(fbset | grep geom | awk '{print $6}')"
+YRES="$(fbset | grep geom | awk '{print $3}')"
+
+CPUTYPE="$(cputype)"
+
+if [ "$1" = "" ]; then
+	echo PVR-INIT: Please use start, stop, or restart.
+	exit 1
+fi
+
+if [ "$1" = "stop" -o  "$1" = "restart" ]; then
+	echo Stopping PVR
+	rmmod bufferclass_ti
+	rmmod omaplfb 2>/dev/null
+	rmmod pvrsrvkm 2>/dev/null
+fi
+
+if [ "$1" = "stop" ]; then
+	exit 0
+fi
+
+# Set RGBA ordering to something the drivers like
+if [ "$BITSPERPIXEL" = "32" ] ; then
+	fbset -rgba 8/16,8/8,8/0,8/24
+fi
+
+# Try to enable triple buffering when there's enough VRAM
+fbset -vyres $(expr $YRES \* 3)
+
+sgxprepare () {
+	echo Starting PVR
+
+	lsmod | grep pvrsrvkm > /dev/null
+
+	if [ "$?" != "0" ]
+	then
+		insmod $(busybox find /lib/modules/$(uname -r) -name "pvrsrvkm.ko")
+
+		if [ "$?" != "0" ]
+		then
+			echo "Could not find pvrsrvkm driver"
+			exit 1
+		fi
+	fi
+
+	modprobe omaplfb
+	modprobe bufferclass_ti
+
+	pvr_maj=`grep "pvrsrvkm$" /proc/devices | cut -b1,2,3`
+	bc_maj=`grep "bc" /proc/devices | cut -b1,2,3`
+
+	if [ -e /dev/pvrsrvkm ] ; then
+		rm -f /dev/pvrsrvkm
+	fi
+
+	mknod /dev/pvrsrvkm c $pvr_maj 0
+	chmod 666 /dev/pvrsrvkm
+
+	touch /etc/powervr-esrev
+
+	SAVED_ESREVISION="$(cat /etc/powervr-esrev)"
+}
+
+sgxfinish () {
+	# Fix up a bug in opkg
+	if [ $(readlink /usr/lib/libsrv_um.so) != $(readlink /usr/lib/libsrv_um.so.1) ] ; then
+		cd /usr/lib
+		ln -sf $(readlink /usr/lib/libsrv_um.so.1) libsrv_um.so
+	fi
+
+	if [ "${ES_REVISION}" != "${SAVED_ESREVISION}" ] ; then
+		echo -n "Starting SGX fixup for"
+		echo " ES${ES_REVISION}.x"
+		cp -a /usr/lib/ES${ES_REVISION}.0/* /usr/lib
+		cp -a /usr/bin/ES${ES_REVISION}.0/* /usr/bin
+		echo "${ES_REVISION}" > /etc/powervr-esrev
+	fi
+
+	if ! /usr/bin/pvrsrvctl --start --no-module; then return; fi
+}
+
+case $CPUTYPE in
+"OMAP3530")
+	sgxprepare
+
+	devmem2 0x48004B48 w 0x2 > /dev/null
+	devmem2 0x48004B10 w 0x1 > /dev/null
+	devmem2 0x48004B00 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x50000014 | sed -e s:0x00010205:5: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI33XX")
+	sgxprepare
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:8: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI43XX")
+	sgxprepare
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:8: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI816x")
+	sgxprepare
+
+	devmem2 0x48180F04 w 0x0 > /dev/null
+	devmem2 0x48180900 w 0x2 > /dev/null
+	devmem2 0x48180920 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:6: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+*)
+	echo No SGX hardware, not starting PVR
+	;;
+esac

recipes-graphics/libgles/libgles-omap3-5.01.01.01/rc_dri.pvr

@@ -0,0 +1,145 @@
+#!/bin/sh
+PATH=$PATH:/usr/sbin
+
+# Check if an fb device is available.  If not then just go ahead and
+# exit because we have no display.
+fbset > /dev/null 2>&1
+if [ "$?" == "1" ]
+then
+	# looks like there is no display, so let's exit
+	exit 0
+fi
+
+BITSPERPIXEL="$(fbset | grep geom | awk '{print $6}')"
+YRES="$(fbset | grep geom | awk '{print $3}')"
+
+CPUTYPE="$(cputype)"
+
+if [ "$1" = "" ]; then
+	echo PVR-INIT: Please use start, stop, or restart.
+	exit 1
+fi
+
+if [ "$1" = "stop" -o  "$1" = "restart" ]; then
+	echo Stopping PVR
+
+	# Stop the X Server.
+	#
+	[ -f /tmp/.X0-lock ] && read XPID < /tmp/.X0-lock && [ -n "$XPID" ] && kill $XPID && while [ -e /proc/$XPID ] ; do sleep 1; done
+
+	rmmod bufferclass_ti
+	rmmod pvrsrvkm 2>/dev/null
+	rmmod drm 2>/dev/null
+fi
+
+if [ "$1" = "stop" ]; then
+	exit 0
+fi
+
+# Set RGBA ordering to something the drivers like
+if [ "$BITSPERPIXEL" = "32" ] ; then
+	fbset -rgba 8/16,8/8,8/0,8/24
+fi
+
+# Try to enable triple buffering when there's enough VRAM
+fbset -vyres $(expr $YRES \* 3)
+
+sgxprepare () {
+	echo Starting PVR
+
+	# Start the X Server.
+	# The X Server will load the PVR Services module.
+	#
+	/usr/local/XSGX/bin/X -verbose -config /usr/local/XSGX/etc/xorg.conf &
+
+	modprobe drm
+
+	lsmod | grep pvrsrvkm > /dev/null
+
+	if [ "$?" != "0" ]
+	then
+		insmod $(busybox find /lib/modules/$(uname -r) -name "pvrsrvkm.ko")
+
+		if [ "$?" != "0" ]
+		then
+			echo "Could not find pvrsrvkm driver"
+			exit 1
+		fi
+	fi
+
+	modprobe bufferclass_ti
+
+	pvr_maj=`grep "pvrsrvkm$" /proc/devices | cut -b1,2,3`
+        bc_maj=`grep "bc" /proc/devices | cut -b1,2,3`
+
+	if [ -e /dev/pvrsrvkm ] ; then
+		rm -f /dev/pvrsrvkm
+	fi
+
+	mknod /dev/pvrsrvkm c $pvr_maj 0
+	chmod 666 /dev/pvrsrvkm
+
+	touch /etc/powervr-esrev
+
+	SAVED_ESREVISION="$(cat /etc/powervr-esrev)"
+}
+
+sgxfinish () {
+	# Fix up a bug in opkg
+	if [ $(readlink /usr/lib/libsrv_um.so) != $(readlink /usr/lib/libsrv_um.so.1) ] ; then
+		cd /usr/lib
+		ln -sf $(readlink /usr/lib/libsrv_um.so.1) libsrv_um.so
+	fi
+
+	if [ "${ES_REVISION}" != "${SAVED_ESREVISION}" ] ; then
+		echo -n "Starting SGX fixup for"
+		echo " ES${ES_REVISION}.x"
+		cp -a /usr/lib/ES${ES_REVISION}.0/* /usr/lib
+		cp -a /usr/bin/ES${ES_REVISION}.0/* /usr/bin
+		echo "${ES_REVISION}" > /etc/powervr-esrev
+	fi
+
+	if ! /usr/bin/pvrsrvctl --start --no-module; then return; fi
+}
+
+case $CPUTYPE in
+"OMAP3530")
+	sgxprepare
+
+	devmem2 0x48004B48 w 0x2 > /dev/null
+	devmem2 0x48004B10 w 0x1 > /dev/null
+	devmem2 0x48004B00 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x50000014 | sed -e s:0x00010205:5: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI33XX")
+	sgxprepare
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:8: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI43XX")
+	sgxprepare
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:8: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI816x")
+	sgxprepare
+
+	devmem2 0x48180F04 w 0x0 > /dev/null
+	devmem2 0x48180900 w 0x2 > /dev/null
+	devmem2 0x48180920 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:6: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+*)
+	echo No SGX hardware, not starting PVR
+	;;
+esac

recipes-graphics/libgles/libgles-omap3-no-x.inc

@@ -0,0 +1,332 @@
+DESCRIPTION = "libGLES for the omap3"
+LICENSE = "proprietary-binary"
+# 'TSPA.txt' might not be the best file to md5sum
+LIC_FILES_CHKSUM = "file://TSPA.txt;md5=c0d5d9c1e38b41677144c4e24d6ddee1"
+
+INC_PR = "r38"
+
+EXCLUDE_FROM_WORLD = "1"
+
+COMPATIBLE_MACHINE = "(omap3|ti814x|ti816x|ti33x|ti43x)"
+
+PVR_INIT ?= "pvrsrvinit"
+
+PROVIDES += "virtual/egl virtual/libgles1 virtual/libgles2"
+
+RREPLACES_${PN} = "libegl libgles1 libgles2"
+RREPLACES_${PN}-dev = "libegl-dev libgles1-dev libgles2-dev"
+RREPLACES_${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg"
+
+RPROVIDES_${PN} = "libegl libgles1 libgles2"
+RPROVIDES_${PN}-dev = "libegl-dev libgles1-dev libgles2-dev"
+RPROVIDES_${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg"
+
+RCONFLICTS_${PN} = "libegl libgles1 libgles2"
+RCONFLICTS_${PN}-dev = "libegl-dev libgles1-dev libgles2-dev"
+RCONFLICTS_${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE} \
+		   file://cputype \
+		   file://rc.pvr \
+		   file://99-bufferclass.rules  \
+"
+
+S = "${WORKDIR}/OMAP35x_Graphics_SDK_${SGXPV}"
+
+# Logic to unpack installjammer file
+TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
+require ../../recipes-ti/includes/ti-eula-unpack.inc
+
+export BINLOCATION ?= "${S}/gfx_rel"
+export ES3LOCATION ?= "${S}/gfx_rel_es3.x"
+export ES5LOCATION ?= "${S}/gfx_rel_es5.x"
+export ES6LOCATION ?= "${S}/gfx_rel_es6.x"
+export ES8LOCATION ?= "${S}/gfx_rel_es8.x"
+export ES9LOCATION ?= "${S}/gfx_rel_es9.x"
+
+LIBGLESWINDOWSYSTEM ?= "libpvrPVR2D_FRONTWSEGL.so.1"
+
+do_configure() {
+	# Attempt to fix up the worst offenders for file permissions
+	for i in $(find ${S} -name "*.h") $(find ${S} -name "*.c") $(find ${S} -name "Make*") ; do
+		chmod 0644 $i
+	done
+
+	# Attempt to create proper library softlinks
+	for sofile in $(find ${S} -name "lib*Open*.so") $(find ${S} -name "lib*srv*.so") $(find ${S} -name "lib*gl*.so") $(find ${S} -name "libpvr*.so") $(find ${S} -name "lib*GL*.so"); do
+		if [ "$(readlink -n ${sofile})" = "" ] ; then
+			mv $sofile ${sofile}.${IMGPV}
+			ln -sf $(basename ${sofile}.${IMGPV}) ${sofile}
+			ln -sf $(basename ${sofile}.${IMGPV}) ${sofile}$(echo ${IMGPV} | awk -F. '{print "." $1}')
+			ln -sf $(basename ${sofile}.${IMGPV}) ${sofile}$(echo ${IMGPV} | awk -F. '{print "." $1 "." $2}')
+		fi
+	done
+
+	# Due to recursive make PLAT_* isn't always passed down correctly, so use sed to fix those
+	for mak in $(find ${S} -name "*.mak") ; do
+		sed -i -e s:arm-none-linux-gnueabi-:${TARGET_PREFIX}:g $mak
+	done
+
+	# clear out old stuff
+	find Binaries/ | xargs rm -f || true
+}
+
+# Force in GNU_HASH and paths to libs
+TARGET_CC_ARCH += " ${TARGET_LINK_HASH_STYLE} -Wl,-rpath-link,${BINLOCATION} -L${BINLOCATION} \
+-L${STAGING_DIR_TARGET}${libdir} -Wl,-rpath-link,${STAGING_DIR_TARGET}${libdir}"
+PARALLEL_MAKE = ""
+
+PLATFORM ?= "LinuxOMAP3"
+
+do_compile() {
+	export TOOLCHAIN="${TOOLCHAIN_PATH}"
+	export PLAT_CC="${CC}"
+	export PLAT_CPP="${CXX}"
+	export PLAR_AR="${AR}"
+
+	mkdir -p ${S}/demos/raw
+	mkdir -p ${S}/trainingcourses/raw
+
+	# Rebuild demos
+	for demo in ${S}/GFX_Linux_SDK/OGLES/SDKPackage/Demos/* ; do
+		cd $demo/OGLES/Build/LinuxGeneric
+		oe_runmake Common=1 PLATFORM=${PLATFORM} X11BUILD=0
+		rm $demo/OGLES/Build/${PLATFORM}/Release*/*.o
+
+		install -m 0755 $demo/OGLES/Build/${PLATFORM}/ReleaseRaw/* ${S}/demos/raw || true
+	done
+
+	for demo in ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/Demos/* ; do
+		cd $demo/OGLES2/Build/LinuxGeneric
+		oe_runmake Common=1 PLATFORM=${PLATFORM} X11BUILD=0
+		rm -f $demo/OGLES2/Build/${PLATFORM}/Release*/*.o
+
+		install -m 0755 $demo/OGLES2/Build/${PLATFORM}/ReleaseRaw/* ${S}/demos/raw || true
+	done
+
+	find ${S} -name "*_org" -delete
+
+	# Build OGLES2 Trainingcourses
+		for training in ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/TrainingCourse/* ; do
+			if [ -e $training/OGLES2/Build/LinuxGeneric/Makefile ] ; then
+				cd $training/OGLES2/Build/LinuxGeneric
+			fi
+
+			if [ -e $training/OGLES2/Build/${PLATFORM}/Makefile ] ; then
+				cd $training/OGLES2/Build/${PLATFORM}
+			fi
+
+			oe_runmake Common=1 PLATFORM=${PLATFORM} X11BUILD=0
+			rm -f $training/OGLES2/Build/${PLATFORM}/Release*/*.o
+
+			install -m 0755 $training/OGLES2/Build/${PLATFORM}/ReleaseRaw/* ${S}/trainingcourses/raw || true
+		done
+
+}
+
+do_install () {
+	install -d ${D}${libdir}
+	cp -pPR ${BINLOCATION}/*.so* ${D}${libdir}
+	rm ${D}${libdir}/libpvrPVR2D_DRIWSEGL.so*
+	rm ${D}${libdir}/libsrv_um_dri.so*
+	rm ${D}${libdir}/pvr_drv.so* 
+
+	install -m 0644 ${BINLOCATION}/*.a ${D}${libdir}
+
+	install -d ${D}${bindir}/
+	install -m 0755 ${WORKDIR}/cputype ${D}${bindir}/
+
+	install -m 0755 ${BINLOCATION}/*_test ${D}${bindir}/
+	install -m 0755 ${BINLOCATION}/gl* ${D}${bindir}/
+	install -m 0755 ${BINLOCATION}/${PVR_INIT} ${D}${bindir}/
+
+	install -d ${D}${includedir}
+	cp -pPR ${S}/GFX_Linux_KM/include4 ${D}${includedir}/
+	cp -pPR ${S}/GFX_Linux_KM/services4 ${D}${includedir}/
+
+	cp -pPr ${S}/include/pvr2d/*.h ${D}${includedir}
+	cp -pPr ${S}/include/OGLES2/* ${D}${includedir}/
+	cp -pPr ${S}/include/wsegl/*.h ${D}${includedir}/
+	
+	install -d ${D}${sysconfdir}/init.d/
+	cp -pP ${WORKDIR}/rc.pvr ${D}${sysconfdir}/init.d/pvr-init
+	chmod +x ${D}${sysconfdir}/init.d/pvr-init
+
+	install -d ${D}${sysconfdir}
+	echo "[default]" > ${D}${sysconfdir}/powervr.ini
+	echo "WindowSystem=${LIBGLESWINDOWSYSTEM}" >> ${D}${sysconfdir}/powervr.ini
+
+	#Create different folders for ease of installing into different platforms with different display drivers/ SGX core
+
+	shared_prog="eglinfo pvr2d_test ${PVR_INIT} services_test sgx_blit_test sgx_clipblit_test sgx_flip_test sgx_init_test sgx_render_flip_test"
+	raw_prog="gles1test1 gles2test1"
+
+	for esrev in 3 5 6 8 9 ; do
+		ESLOCATION=$(eval echo $(echo \$\{ES${esrev}LOCATION\}))
+		if [ -e ${ESLOCATION} ] ; then
+			install -d ${D}${libdir}/ES${esrev}.0
+			install -d ${D}${bindir}/ES${esrev}.0
+			cp -pPR ${ESLOCATION}/lib*${IMGPV} ${ESLOCATION}/pvr_drv.so ${ESLOCATION}/*.a ${D}${libdir}/ES${esrev}.0/
+			for esprog in $shared_prog $raw_prog ; do
+				install -m 0755 ${ESLOCATION}/$esprog ${D}${bindir}/ES${esrev}.0/ 2>/dev/null || true
+			done
+		fi
+	done
+
+	rm ${D}${bindir}/ES*/*.h ${D}${bindir}/ES*/pdsasm ${D}${bindir}/pdsasm -f || true
+
+	install -d ${D}${bindir}/SGX/demos/Raw/
+	install -m 0755 ${S}/demos/raw/* ${D}${bindir}/SGX/demos/Raw/
+	install -d ${D}${bindir}/SGX/trainingcourses/Raw 2>/dev/null || true
+	install -m 0755 ${S}/trainingcourses/raw/* ${D}${bindir}/SGX/trainingcourses/Raw/ 2>/dev/null || true
+
+
+	# Delete objects and linker scripts hidden between the headers
+	find ${D} -name "*.o" -delete
+	find ${D} -name "*.o.cmd" -delete
+
+	install -d ${D}${sysconfdir}/udev/rules.d
+	install -m 0644 ${WORKDIR}/99-bufferclass.rules ${D}${sysconfdir}/udev/rules.d/
+
+}
+
+PACKAGES =+ "${PN}-rawdemos ${PN}-rawtrainingcourses ${PN}-tests"
+# Package the base libraries per silicon revision
+PACKAGES =+ "${PN}-es3 ${PN}-es5 ${PN}-es6 ${PN}-es8 ${PN}-es9"
+RRECOMMENDS_${PN} += "${PN}-es3 ${PN}-es5 ${PN}-es6 ${PN}-es8 ${PN}-es9"
+FILES_${PN}-es3 = "${libdir}/ES3*/* ${bindir}/ES3*/*"
+FILES_${PN}-es5 = "${libdir}/ES5*/* ${bindir}/ES5*/*"
+FILES_${PN}-es6 = "${libdir}/ES6*/* ${bindir}/ES6*/*"
+FILES_${PN}-es8 = "${libdir}/ES8*/* ${bindir}/ES8*/*"
+FILES_${PN}-es9 = "${libdir}/ES9*/* ${bindir}/ES9*/*"
+
+# Stop shlib code from picking a subpackage
+PRIVATE_LIBS_${PN}-es3 = "libGLESv2.so libIMGegl.so libsrv_um.so libpvr2d.so libsrv_init.so libEGL.so libsrv_um_dri.so libglslcompiler.so libGLES_CM.so"
+PRIVATE_LIBS_${PN}-es5 = "libGLESv2.so libIMGegl.so libsrv_um.so libpvr2d.so libsrv_init.so libEGL.so libsrv_um_dri.so libglslcompiler.so libGLES_CM.so"
+PRIVATE_LIBS_${PN}-es6 = "libGLESv2.so libIMGegl.so libsrv_um.so libpvr2d.so libsrv_init.so libEGL.so libsrv_um_dri.so libglslcompiler.so libGLES_CM.so"
+PRIVATE_LIBS_${PN}-es8 = "libGLESv2.so libIMGegl.so libsrv_um.so libpvr2d.so libsrv_init.so libEGL.so libsrv_um_dri.so libglslcompiler.so libGLES_CM.so"
+PRIVATE_LIBS_${PN}-es9 = "libGLESv2.so libIMGegl.so libsrv_um.so libpvr2d.so libsrv_init.so libEGL.so libsrv_um_dri.so libglslcompiler.so libGLES_CM.so"
+
+
+RPROVIDES_${PN} += "libGLESv2.so libEGL.so libGLES_CM.so libpvr2d.so libIMGegl.so libsrv_init.so libsrv_um.so libsrv_um_dri.so libglslcompiler.so"
+
+PACKAGES =+ "${PN}-blitwsegl ${PN}-flipwsegl ${PN}-frontwsegl ${PN}-linuxfbwsegl"
+FILES_${PN}-blitwsegl = "${libdir}/libpvrPVR2D_BLITWSEGL.so.*"
+FILES_${PN}-flipwsegl = "${libdir}/libpvrPVR2D_FLIPWSEGL.so.*"
+FILES_${PN}-frontwsegl = "${libdir}/libpvrPVR2D_FRONTWSEGL.so.*"
+FILES_${PN}-linuxfbwsegl = "${libdir}/libpvrPVR2D_LINUXFBWSEGL.so.*"
+
+PACKAGES =+ "${PN}-blitwsegl-es3 ${PN}-blitwsegl-es5 ${PN}-blitwsegl-es6 ${PN}-blitwsegl-es8 ${PN}-blitwsegl-es9 ${PN}-flipwsegl-es3 ${PN}-flipwsegl-es5 ${PN}-flipwsegl-es6 ${PN}-flipwsegl-es8 ${PN}-flipwsegl-es9 ${PN}-frontwsegl-es3 ${PN}-frontwsegl-es5 ${PN}-frontwsegl-es6 ${PN}-frontwsegl-es8 ${PN}-frontwsegl-es9 ${PN}-linuxfbwsegl-es3 ${PN}-linuxfbwsegl-es5 ${PN}-linuxfbwsegl-es6 ${PN}-linuxfbwsegl-es8 ${PN}-linuxfbwsegl-es9"
+
+FILES_${PN}-blitwsegl-es3 = "${libdir}/ES3*/libpvrPVR2D_BLITWSEGL.so.*"
+FILES_${PN}-blitwsegl-es5 = "${libdir}/ES5*/libpvrPVR2D_BLITWSEGL.so.*"
+FILES_${PN}-blitwsegl-es6 = "${libdir}/ES6*/libpvrPVR2D_BLITWSEGL.so.*"
+FILES_${PN}-blitwsegl-es8 = "${libdir}/ES8*/libpvrPVR2D_BLITWSEGL.so.*"
+FILES_${PN}-blitwsegl-es9 = "${libdir}/ES9*/libpvrPVR2D_BLITWSEGL.so.*"
+RRECOMMENDS_${PN}-blitwsegl = " ${PN}-blitwsegl-es3 ${PN}-blitwsegl-es5 ${PN}-blitwsegl-es6 ${PN}-blitwsegl-es8 ${PN}-blitwsegl-es9"
+
+FILES_${PN}-flipwsegl-es3 = "${libdir}/ES3*/libpvrPVR2D_FLIPWSEGL.so.*"
+FILES_${PN}-flipwsegl-es5 = "${libdir}/ES5*/libpvrPVR2D_FLIPWSEGL.so.*"
+FILES_${PN}-flipwsegl-es6 = "${libdir}/ES6*/libpvrPVR2D_FLIPWSEGL.so.*"
+FILES_${PN}-flipwsegl-es8 = "${libdir}/ES8*/libpvrPVR2D_FLIPWSEGL.so.*"
+FILES_${PN}-flipwsegl-es9 = "${libdir}/ES9*/libpvrPVR2D_FLIPWSEGL.so.*"
+RRECOMMENDS_${PN}-flipwsegl = " ${PN}-flipwsegl-es3 ${PN}-flipwsegl-es5 ${PN}-flipwsegl-es6 ${PN}-flipwsegl-es8 ${PN}-flipwsegl-es9"
+
+FILES_${PN}-frontwsegl-es3 = "${libdir}/ES3*/libpvrPVR2D_FRONTWSEGL.so.*"
+FILES_${PN}-frontwsegl-es5 = "${libdir}/ES5*/libpvrPVR2D_FRONTWSEGL.so.*"
+FILES_${PN}-frontwsegl-es6 = "${libdir}/ES6*/libpvrPVR2D_FRONTWSEGL.so.*"
+FILES_${PN}-frontwsegl-es8 = "${libdir}/ES8*/libpvrPVR2D_FRONTWSEGL.so.*"
+FILES_${PN}-frontwsegl-es9 = "${libdir}/ES9*/libpvrPVR2D_FRONTWSEGL.so.*"
+RRECOMMENDS_${PN}-frontwsegl = " ${PN}-frontwsegl-es3 ${PN}-frontwsegl-es5 ${PN}-frontwsegl-es6 ${PN}-frontwsegl-es8 ${PN}-frontwsegl-es9"
+
+FILES_${PN}-linuxfbwsegl-es3 = "${libdir}/ES3*/libpvrPVR2D_LINUXFBWSEGL.so.*"
+FILES_${PN}-linuxfbwsegl-es5 = "${libdir}/ES5*/libpvrPVR2D_LINUXFBWSEGL.so.*"
+FILES_${PN}-linuxfbwsegl-es6 = "${libdir}/ES6*/libpvrPVR2D_LINUXFBWSEGL.so.*"
+FILES_${PN}-linuxfbwsegl-es8 = "${libdir}/ES8*/libpvrPVR2D_LINUXFBWSEGL.so.*"
+FILES_${PN}-linuxfbwsegl-es9 = "${libdir}/ES9*/libpvrPVR2D_LINUXFBWSEGL.so.*"
+RRECOMMENDS_${PN}-linuxfbwsegl = " ${PN}-linuxfbwsegl-es3 ${PN}-linuxfbwsegl-es5 ${PN}-linuxfbwsegl-es6 ${PN}-linuxfbwsegl-es8 ${PN}-linuxfbwsegl-es9"
+
+CONFFILES_${PN} = "${sysconfdir}/powervr.ini"
+
+FILES_${PN} = "${sysconfdir} ${libdir}/*.so* ${bindir}/${PVR_INIT} ${bindir}/cputype ${bindir}/*"
+
+FILES_${PN}-tests = "${bindir}/*test*"
+FILES_${PN}-dbg = "${libdir}/.debug/* ${bindir}/.debug/* \
+                   ${libdir}/ES*/.debug ${bindir}/*/.debug\
+                   ${bindir}/SGX/demos/*/.debug/* \
+                   ${bindir}/SGX/trainingcourses/*/.debug/* \
+"
+
+FILES_${PN}-rawdemos = "${bindir}/SGX/demos/Raw/*"
+
+FILES_${PN}-rawtrainingcourses = "${bindir}/SGX/trainingcourses/Raw/*"
+
+# The libs need the kernel-modules
+RRECOMMENDS_${PN} += "omap3-sgx-modules"
+
+# The initscript calls fbset, cputype calls devmem2
+RDEPENDS_${PN} += "fbset devmem2"
+
+#HACK! These are binaries, so we can't guarantee that LDFLAGS match :(
+INSANE_SKIP_${PN} = "ldflags dev-so"
+INSANE_SKIP_${PN}-es3 = "ldflags dev-so staticdev"
+INSANE_SKIP_${PN}-es5 = "ldflags dev-so staticdev"
+INSANE_SKIP_${PN}-es6 = "ldflags dev-so staticdev"
+INSANE_SKIP_${PN}-es8 = "ldflags dev-so staticdev"
+INSANE_SKIP_${PN}-es9 = "ldflags dev-so staticdev"
+INSANE_SKIP_${PN}-rawdemos = "ldflags dev-so useless-rpaths"
+INSANE_SKIP_${PN}-blitwsegl = "ldflags"
+INSANE_SKIP_${PN}-blitwsegl-es3 = "ldflags"
+INSANE_SKIP_${PN}-blitwsegl-es5 = "ldflags"
+INSANE_SKIP_${PN}-blitwsegl-es6 = "ldflags"
+INSANE_SKIP_${PN}-blitwsegl-es8 = "ldflags"
+INSANE_SKIP_${PN}-blitwsegl-es9 = "ldflags"
+INSANE_SKIP_${PN}-flipwsegl = "ldflags"
+INSANE_SKIP_${PN}-flipwsegl-es3 = "ldflags"
+INSANE_SKIP_${PN}-flipwsegl-es5 = "ldflags"
+INSANE_SKIP_${PN}-flipwsegl-es6 = "ldflags"
+INSANE_SKIP_${PN}-flipwsegl-es8 = "ldflags"
+INSANE_SKIP_${PN}-flipwsegl-es9 = "ldflags"
+INSANE_SKIP_${PN}-frontwsegl = "ldflags"
+INSANE_SKIP_${PN}-frontwsegl-es3 = "ldflags"
+INSANE_SKIP_${PN}-frontwsegl-es5 = "ldflags"
+INSANE_SKIP_${PN}-frontwsegl-es6 = "ldflags"
+INSANE_SKIP_${PN}-frontwsegl-es8 = "ldflags"
+INSANE_SKIP_${PN}-frontwsegl-es9 = "ldflags"
+INSANE_SKIP_${PN}-linuxfbwsegl = "ldflags"
+INSANE_SKIP_${PN}-linuxfbwsegl-es3 = "ldflags"
+INSANE_SKIP_${PN}-linuxfbwsegl-es5 = "ldflags"
+INSANE_SKIP_${PN}-linuxfbwsegl-es6 = "ldflags"
+INSANE_SKIP_${PN}-linuxfbwsegl-es8 = "ldflags"
+INSANE_SKIP_${PN}-linuxfbwsegl-es9 = "ldflags"
+INSANE_SKIP_${PN}-tests = "ldflags"
+
+# Quality control is really poor on these SDKs, so hack around the latest madness:
+FILES_${PN} += "${libdir}/*.so "
+FILES_${PN}-dev = "${includedir}"
+
+inherit update-rc.d
+
+INITSCRIPT_NAME = "pvr-init"
+INITSCRIPT_PARAMS = "start 30 5 2 . stop 40 0 1 6 ."
+
+# Append to update-rc.d postinst
+pkg_postinst_${PN}_append() {
+rm -f $D${sysconfdir}/powervr-esrev
+
+}
+
+pkg_postinst_${PN}-blitwsegl() {
+rm -f $D${sysconfdir}/powervr-esrev
+}
+
+pkg_postinst_${PN}-flipwsegl() {
+rm -f $D${sysconfdir}/powervr-esrev
+}
+
+pkg_postinst_${PN}-frontwsegl() {
+rm -f $D${sysconfdir}/powervr-esrev
+}
+pkg_postinst_${PN}-linuxfbwsegl() {
+rm -f $D${sysconfdir}/powervr-esrev
+}

recipes-graphics/libgles/libgles-omap3-x11-4.09.00.01/99-bufferclass.rules

@@ -0,0 +1,7 @@
+# Give everyone access to bufferclass nodes and make a compatibility symlink for the first one
+SUBSYSTEM=="bccat", MODE="0666"
+KERNEL=="bccat0", SYMLINK+="bc_cat", MODE="0666"
+
+# Give everyone access to v4l nodes
+SUBSYSTEM=="video4linux", MODE="0666"
+

recipes-graphics/libgles/libgles-omap3-x11-4.09.00.01/cputype

@@ -0,0 +1,17 @@
+#!/bin/sh
+
+machine_id() { # return the machine ID
+	awk 'BEGIN { FS=": " } /Hardware/ \
+		{ gsub(" ", "_", $2); print tolower($2) } ' </proc/cpuinfo
+}
+
+if [ "$(machine_id)" = "ti8168evm" ] ; then
+	echo TI816x
+elif [ "$(machine_id)" = "am335xevm" ] ; then
+    echo TI33XX
+else
+	devmem2 0x4800244c | \
+	grep 'Read at address' | \
+	sed -e 's/.*): //' | \
+	sed -e 's/0x00005C00/OMAP3503/' -e 's/0x00001C00/OMAP3515/' -e 's/0x00004C00/OMAP3525/' -e 's/0x00000C00/OMAP3530/' -e 's/0x00005E00/OMAP3503/' -e 's/0x00001E00/OMAP3515/' -e 's/0x00004E00/OMAP3525/' -e 's/0x00000E00/OMAP3530/' -e 's/0x00000CC0/OMAP3530/'
+fi

recipes-graphics/libgles/libgles-omap3-x11-4.09.00.01/rc.pvr

@@ -0,0 +1,125 @@
+#!/bin/sh
+PATH=$PATH:/usr/sbin
+
+# Check if an fb device is available.  If not then just go ahead and
+# exit because we have no display.
+fbset > /dev/null 2>&1
+if [ "$?" == "1" ]
+then
+    # looks like there is no display, so let's exit
+    exit 0
+fi
+
+BITSPERPIXEL="$(fbset | grep geom | awk '{print $6}')"
+YRES="$(fbset | grep geom | awk '{print $3}')"
+
+CPUTYPE="$(cputype)"
+
+if [ "$1" = "" ]; then
+	echo PVR-INIT: Please use start, stop, or restart.
+	exit 1
+fi
+
+if [ "$1" = "stop" -o  "$1" = "restart" ]; then
+	echo Stopping PVR
+	rmmod bufferclass_ti
+	rmmod omaplfb 2>/dev/null
+	rmmod pvrsrvkm 2>/dev/null
+fi
+
+if [ "$1" = "stop" ]; then
+	exit 0
+fi
+
+# Set RGBA ordering to something the drivers like
+if [ "$BITSPERPIXEL" = "32" ] ; then
+	fbset -rgba 8/16,8/8,8/0,8/24
+fi
+
+# Try to enable triple buffering when there's enough VRAM
+fbset -vyres $(expr $YRES \* 3)
+
+sgxprepare () {
+	echo Starting PVR
+	insmod $(busybox find /lib/modules/$(uname -r) -name "pvrsrvkm.ko")
+
+    if [ "$?" != "0" ]
+    then
+        echo "Could not find pvrsrvkm driver"
+        exit 1
+    fi
+
+	modprobe omaplfb
+	modprobe bufferclass_ti
+
+	pvr_maj=`grep "pvrsrvkm$" /proc/devices | cut -b1,2,3`
+        bc_maj=`grep "bc" /proc/devices | cut -b1,2,3`
+
+	if [ -e /dev/pvrsrvkm ] ; then
+		rm -f /dev/pvrsrvkm
+	fi
+
+	mknod /dev/pvrsrvkm c $pvr_maj 0
+	chmod 666 /dev/pvrsrvkm
+
+	touch /etc/powervr-esrev
+
+	SAVED_ESREVISION="$(cat /etc/powervr-esrev)"
+}
+
+sgxfinish () {
+	# Fix up a bug in opkg
+	if [ $(readlink /usr/lib/libsrv_um.so) != $(readlink /usr/lib/libsrv_um.so.1) ] ; then
+		cd /usr/lib
+		ln -sf $(readlink /usr/lib/libsrv_um.so.1) libsrv_um.so
+	fi
+
+	if [ "${ES_REVISION}" != "${SAVED_ESREVISION}" ] ; then
+		echo -n "Starting SGX fixup for"
+		echo " ES${ES_REVISION}.x"
+		cp -a /usr/lib/ES${ES_REVISION}.0/* /usr/lib
+		cp -a /usr/bin/ES${ES_REVISION}.0/* /usr/bin
+		echo "${ES_REVISION}" > /etc/powervr-esrev
+	fi
+
+	if ! /usr/bin/pvrsrvctl --start --no-module; then return; fi 
+}
+
+case $CPUTYPE in
+"OMAP3530")
+	sgxprepare
+
+	devmem2 0x48004B48 w 0x2 > /dev/null
+	devmem2 0x48004B10 w 0x1 > /dev/null
+	devmem2 0x48004B00 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x50000014 | sed -e s:0x00010205:5: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI33XX")
+	sgxprepare
+
+	devmem2 0x44e01104 w 0x0 > /dev/null
+	devmem2 0x44e00904 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:8: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI816x")
+	sgxprepare
+
+	devmem2 0x48180F04 w 0x0 > /dev/null
+	devmem2 0x48180900 w 0x2 > /dev/null
+	devmem2 0x48180920 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:6: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+*)
+	echo No SGX hardware, not starting PVR
+	;;
+esac
+

recipes-graphics/libgles/libgles-omap3-x11-4.09.00.01/rc_dri.pvr

@@ -0,0 +1,137 @@
+#!/bin/sh
+PATH=$PATH:/usr/sbin
+
+# Check if an fb device is available.  If not then just go ahead and
+# exit because we have no display.
+fbset > /dev/null 2>&1
+if [ "$?" == "1" ]
+then
+    # looks like there is no display, so let's exit
+    exit 0
+fi
+
+BITSPERPIXEL="$(fbset | grep geom | awk '{print $6}')"
+YRES="$(fbset | grep geom | awk '{print $3}')"
+
+CPUTYPE="$(cputype)"
+
+if [ "$1" = "" ]; then
+	echo PVR-INIT: Please use start, stop, or restart.
+	exit 1
+fi
+
+if [ "$1" = "stop" -o  "$1" = "restart" ]; then
+	echo Stopping PVR
+
+	# Stop the X Server.
+	#
+	[ -f /tmp/.X0-lock ] && read XPID < /tmp/.X0-lock && [ -n "$XPID" ] && kill $XPID && while [ -e /proc/$XPID ] ; do sleep 1; done
+
+	rmmod bufferclass_ti
+	rmmod pvrsrvkm 2>/dev/null
+    rmmod drm 2>/dev/null
+fi
+
+if [ "$1" = "stop" ]; then
+	exit 0
+fi
+
+# Set RGBA ordering to something the drivers like
+if [ "$BITSPERPIXEL" = "32" ] ; then
+	fbset -rgba 8/16,8/8,8/0,8/24
+fi
+
+# Try to enable triple buffering when there's enough VRAM
+fbset -vyres $(expr $YRES \* 3)
+
+sgxprepare () {
+	echo Starting PVR
+
+	# Start the X Server. 
+	# The X Server will load the PVR Services module.
+	#
+	/usr/local/XSGX/bin/X -verbose -config /usr/local/XSGX/etc/xorg.conf &
+
+	modprobe drm
+
+	insmod $(busybox find /lib/modules/$(uname -r) -name "pvrsrvkm.ko")
+
+    if [ "$?" != "0" ]
+    then
+        echo "Could not find pvrsrvkm driver"
+        exit 1
+    fi
+
+	modprobe bufferclass_ti
+
+	pvr_maj=`grep "pvrsrvkm$" /proc/devices | cut -b1,2,3`
+        bc_maj=`grep "bc" /proc/devices | cut -b1,2,3`
+
+	if [ -e /dev/pvrsrvkm ] ; then
+		rm -f /dev/pvrsrvkm
+	fi
+
+	mknod /dev/pvrsrvkm c $pvr_maj 0
+	chmod 666 /dev/pvrsrvkm
+
+	touch /etc/powervr-esrev
+
+	SAVED_ESREVISION="$(cat /etc/powervr-esrev)"
+}
+
+sgxfinish () {
+	# Fix up a bug in opkg
+	if [ $(readlink /usr/lib/libsrv_um.so) != $(readlink /usr/lib/libsrv_um.so.1) ] ; then
+		cd /usr/lib
+		ln -sf $(readlink /usr/lib/libsrv_um.so.1) libsrv_um.so
+	fi
+
+	if [ "${ES_REVISION}" != "${SAVED_ESREVISION}" ] ; then
+		echo -n "Starting SGX fixup for"
+		echo " ES${ES_REVISION}.x"
+		cp -a /usr/lib/ES${ES_REVISION}.0/* /usr/lib
+		cp -a /usr/bin/ES${ES_REVISION}.0/* /usr/bin
+		echo "${ES_REVISION}" > /etc/powervr-esrev
+	fi
+
+	if ! /usr/bin/pvrsrvctl --start --no-module; then return; fi 
+}
+
+case $CPUTYPE in
+"OMAP3530")
+	sgxprepare
+
+	devmem2 0x48004B48 w 0x2 > /dev/null
+	devmem2 0x48004B10 w 0x1 > /dev/null
+	devmem2 0x48004B00 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x50000014 | sed -e s:0x00010205:5: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI33XX")
+	sgxprepare
+
+	devmem2 0x44e01104 w 0x0 > /dev/null
+	devmem2 0x44e00904 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:8: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+"TI816x")
+	sgxprepare
+
+	devmem2 0x48180F04 w 0x0 > /dev/null
+	devmem2 0x48180900 w 0x2 > /dev/null
+	devmem2 0x48180920 w 0x2 > /dev/null
+
+	ES_REVISION="$(devmem2 0x56000014 | sed -e s:0x00010205:6: -e s:0x00010201:3: -e s:0x00010003:2: | tail -n1 | awk -F': ' '{print $2}')"
+
+	sgxfinish
+	;;
+*)
+	echo No SGX hardware, not starting PVR
+	;;
+esac
+

recipes-graphics/libgles/libgles-omap3-x11-4.09.00.01/sample.desktop

@@ -0,0 +1,8 @@
+[Desktop Entry]
+Name=NAME Demo
+Comment=OGLES Demo
+Exec=EXEC
+Icon=star
+Type=Application
+Categories=Graphics;
+

recipes-graphics/libgles/libgles-omap3-x11.inc

@@ -0,0 +1,333 @@
+DESCRIPTION = "libGLES for the omap3 (X11)"
+LICENSE = "proprietary-binary"
+# 'TSPA.txt' might not be the best file to md5sum
+LIC_FILES_CHKSUM = "file://TSPA.txt;md5=c0d5d9c1e38b41677144c4e24d6ddee1"
+
+INC_PR = "r38"
+
+EXCLUDE_FROM_WORLD = "1"
+
+COMPATIBLE_MACHINE = "(omap3|ti814x|ti816x|ti33x|ti43x)"
+
+DEPENDS = "virtual/libx11 libxau libxdmcp libdrm"
+
+export SUPPORT_XORG ?= "1"
+PVR_INIT ?= "pvrsrvinit"
+
+PROVIDES += "libgles-omap3 virtual/egl virtual/libgles1 virtual/libgles2"
+
+RREPLACES_${PN} = "libegl libgles1 libgles2"
+RREPLACES_${PN}-dev = "libegl-dev libgles1-dev libgles2-dev"
+RREPLACES_${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg"
+
+RPROVIDES_${PN} = "libegl libgles1 libgles2"
+RPROVIDES_${PN}-dev = "libegl-dev libgles1-dev libgles2-dev"
+RPROVIDES_${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg"
+
+RCONFLICTS_${PN} = "libegl libgles1 libgles2"
+RCONFLICTS_${PN}-dev = "libegl-dev libgles1-dev libgles2-dev"
+RCONFLICTS_${PN}-dbg = "libegl-dbg libgles1-dbg libgles2-dbg"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE} \
+		   file://cputype \
+		   file://rc_dri.pvr \
+		   file://sample.desktop \
+		   file://99-bufferclass.rules  \
+"
+
+S = "${WORKDIR}/OMAP35x_Graphics_SDK_${SGXPV}"
+
+# Logic to unpack installjammer file
+TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
+require ../../recipes-ti/includes/ti-eula-unpack.inc
+
+export BINLOCATION ?= "${S}/gfx_rel"
+export ES3LOCATION ?= "${S}/gfx_rel_es3.x"
+export ES5LOCATION ?= "${S}/gfx_rel_es5.x"
+export ES6LOCATION ?= "${S}/gfx_rel_es6.x"
+export ES8LOCATION ?= "${S}/gfx_rel_es8.x"
+export ES9LOCATION ?= "${S}/gfx_rel_es9.x"
+
+LIBGLESWINDOWSYSTEM ?= "libpvrPVR2D_DRIWSEGL.so"
+
+python __anonymous() {
+    if "x11" not in d.getVar("DISTRO_FEATURES", True).split():
+        raise bb.parse.SkipPackage("Recipe is x11-specific, skipping")
+}
+
+do_configure() {
+	# Attempt to fix up the worst offenders for file permissions
+	for i in $(find ${S} -name "*.h") $(find ${S} -name "*.c") $(find ${S} -name "Make*") ; do
+		chmod 0644 $i
+	done
+
+	# Attempt to create proper library softlinks
+	for sofile in $(find ${S} -name "lib*Open*.so") $(find ${S} -name "lib*srv*.so") $(find ${S} -name "lib*gl*.so") $(find ${S} -name "libpvr*.so") $(find ${S} -name "lib*GL*.so"); do
+		if [ "$(readlink -n ${sofile})" = "" ] ; then
+			mv $sofile ${sofile}.${IMGPV}
+			ln -sf $(basename ${sofile}.${IMGPV}) ${sofile}
+			ln -sf $(basename ${sofile}.${IMGPV}) ${sofile}$(echo ${IMGPV} | awk -F. '{print "." $1}')
+			ln -sf $(basename ${sofile}.${IMGPV}) ${sofile}$(echo ${IMGPV} | awk -F. '{print "." $1 "." $2}')
+		fi
+	done
+
+	# Due to recursive make PLAT_* isn't always passed down correctly, so use sed to fix those
+	for mak in $(find ${S} -name "*.mak") ; do
+		sed -i -e s:arm-none-linux-gnueabi-:${TARGET_PREFIX}:g $mak
+	done
+
+	# clear out old stuff
+	find Binaries/ | xargs rm -f || true
+}
+
+# Force in GNU_HASH and paths to libs
+TARGET_CC_ARCH += " ${TARGET_LINK_HASH_STYLE} -Wl,-rpath-link,${BINLOCATION} -L${BINLOCATION} \
+-L${STAGING_DIR_TARGET}${libdir} -Wl,-rpath-link,${STAGING_DIR_TARGET}${libdir}"
+PARALLEL_MAKE = ""
+
+PLATFORM ?= "LinuxOMAP3"
+
+do_compile() {
+	export TOOLCHAIN="${TOOLCHAIN_PATH}"
+	export PLAT_CC="${CC}"
+	export PLAT_CPP="${CXX}"
+	export PLAR_AR="${AR}"
+
+	export X11ROOT="${STAGING_DIR_HOST}/usr"
+	mkdir -p ${S}/demos/x11
+	mkdir -p ${S}/trainingcourses/x11
+
+	mkdir -p ${S}/demos/raw
+	mkdir -p ${S}/trainingcourses/raw
+
+	# Rebuild demos
+		for demo in ${S}/GFX_Linux_SDK/OGLES/SDKPackage/Demos/* ; do
+			cd $demo/OGLES/Build/LinuxGeneric
+			oe_runmake Common=1 PLATFORM=${PLATFORM} X11BUILD=1
+			rm $demo/OGLES/Build/${PLATFORM}/Release*/*.o
+
+			install -m 0755 $demo/OGLES/Build/${PLATFORM}/ReleaseX11/* ${S}/demos/x11 || true
+			sed -e s:NAME:$(basename $demo): \
+			    -e s:EXEC:${bindir}/SGX/demos/X11/$(basename $demo/OGLES/Build/${PLATFORM}/ReleaseX11/*): \
+			    ${WORKDIR}/sample.desktop > ${WORKDIR}/$(basename $demo).desktop
+		done
+
+		for demo in ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/Demos/* ; do
+			cd $demo/OGLES2/Build/LinuxGeneric
+			oe_runmake Common=1 PLATFORM=${PLATFORM} X11BUILD=1
+			rm -f $demo/OGLES2/Build/${PLATFORM}/Release*/*.o
+
+			install -m 0755 $demo/OGLES2/Build/${PLATFORM}/ReleaseX11/* ${S}/demos/x11 || true
+			sed -e s:NAME:$(basename $demo): \
+			    -e s:EXEC:${bindir}/SGX/demos/X11/$(basename $demo/OGLES2/Build/${PLATFORM}/ReleaseX11/*): \
+			    ${WORKDIR}/sample.desktop > ${WORKDIR}/$(basename $demo).desktop
+		done
+
+
+	find ${S} -name "*_org" -delete
+
+	# Build OGLES2 Trainingcourses
+		for training in ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/TrainingCourse/* ; do
+			if [ -e $training/OGLES2/Build/LinuxGeneric/Makefile ] ; then
+				cd $training/OGLES2/Build/LinuxGeneric
+			fi
+
+			if [ -e $training/OGLES2/Build/${PLATFORM}/Makefile ] ; then
+				cd $training/OGLES2/Build/${PLATFORM}
+			fi
+
+			oe_runmake Common=1 PLATFORM=${PLATFORM} X11BUILD=1
+			rm -f $training/OGLES2/Build/${PLATFORM}/Release*/*.o
+
+			install -m 0755 $training/OGLES2/Build/${PLATFORM}/ReleaseX11/* ${S}/trainingcourses/x11 || true
+		done
+}
+
+do_install () {
+	install -d ${D}${libdir}
+	cp -pPR ${BINLOCATION}/*.so* ${D}${libdir}
+	install -m 0644 ${BINLOCATION}/*.a ${D}${libdir}
+
+	install -d ${D}${bindir}/
+	install -m 0755 ${WORKDIR}/cputype ${D}${bindir}/
+
+	install -m 0755 ${BINLOCATION}/*_test ${D}${bindir}/
+	install -m 0755 ${BINLOCATION}/gl* ${D}${bindir}/
+	install -m 0755 ${BINLOCATION}/${PVR_INIT} ${D}${bindir}/
+
+	install -m 0755 ${BINLOCATION}/xgles1test1 ${D}${bindir}/
+
+	install -d ${D}${includedir}
+	cp -pPR ${S}/GFX_Linux_KM/include4 ${D}${includedir}/
+	cp -pPR ${S}/GFX_Linux_KM/services4 ${D}${includedir}/
+
+	cp -pPR ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/Builds/OGLES2/Include/* ${D}${includedir}/
+	cp -pPR ${S}/GFX_Linux_SDK/OGLES/SDKPackage/Builds/OGLES/Include/* ${D}${includedir}/
+	cp -pPR ${S}/GFX_Linux_SDK/OGLES/SDKPackage/Builds/OGLES/${PLATFORM}/Include/GLES/* ${D}${includedir}/GLES/ 2>/dev/null || true
+	cp -pPr ${S}/GFX_Linux_SDK/OGLES2/SDKPackage/Builds/OGLES2/${PLATFORM}/Include/GLES/* ${D}${includedir}/GLES2/ 2>/dev/null || true
+	cp -pPr ${S}/include/wsegl/*.h ${D}${includedir} || true
+	
+	install -d ${D}${sysconfdir}/init.d/
+
+	install -d ${D}${sysconfdir}
+	echo "[default]" > ${D}${sysconfdir}/powervr.ini
+	echo "WindowSystem=${LIBGLESWINDOWSYSTEM}" >> ${D}${sysconfdir}/powervr.ini
+
+	# The ES3.x, ES5.x and ES6.x CPUs have different SGX hardware, so we need to install multiple sets of userspace
+
+	install -d ${D}${libdir}/ES9.0
+	install -d ${D}${libdir}/ES8.0
+	install -d ${D}${libdir}/ES6.0
+	install -d ${D}${libdir}/ES5.0
+	install -d ${D}${libdir}/ES3.0
+
+	install -d ${D}${bindir}/ES9.0
+	install -d ${D}${bindir}/ES8.0
+	install -d ${D}${bindir}/ES6.0
+	install -d ${D}${bindir}/ES5.0
+	install -d ${D}${bindir}/ES3.0
+
+	x11_prog="eglinfo_x xgles1test1 xgles2test1 xmultiegltest"
+
+	for esrev in 3 5 6 8 9; do
+		ESLOCATION=$(eval echo $(echo \$\{ES${esrev}LOCATION\}))
+		if [ -e ${ESLOCATION} ] ; then
+			cp -pPR ${ESLOCATION}/lib*${IMGPV} ${ESLOCATION}/pvr_drv.so ${ESLOCATION}/*.a ${D}${libdir}/ES${esrev}.0/
+			for esprog in $x11_prog ; do
+				install -m 0755 ${ESLOCATION}/$esprog ${D}${bindir}/ES${esrev}.0/ 2>/dev/null || true
+			done
+		fi
+	done
+
+	rm ${D}${bindir}/ES*/*.h ${D}${bindir}/ES*/pdsasm ${D}${bindir}/pdsasm -f || true
+
+	install -d ${D}${prefix}/share/applications
+	cp ${WORKDIR}/*.desktop ${D}${prefix}/share/applications
+	rm ${D}${prefix}/share/applications/sample.desktop
+
+	install -d ${D}${bindir}/SGX/demos/X11/
+	install -m 0755 ${S}/demos/x11/* ${D}${bindir}/SGX/demos/X11/
+	install -d ${D}${bindir}/SGX/trainingcourses/X11  2>/dev/null || true
+	install -m 0755 ${S}/trainingcourses/x11/* ${D}${bindir}/SGX/trainingcourses/X11/ 2>/dev/null || true
+
+	# Delete objects and linker scripts hidden between the headers
+	find ${D} -name "*.o" -delete
+	find ${D} -name "*.o.cmd" -delete
+
+	install -d ${D}${sysconfdir}/udev/rules.d
+	install -m 0644 ${WORKDIR}/99-bufferclass.rules ${D}${sysconfdir}/udev/rules.d/
+
+}
+
+PACKAGES =+ "${PN}-x11demos ${PN}-x11trainingcourses xserver-kdrive-powervrsgx"
+
+# Package the base libraries per silicon revision
+PACKAGES =+ "${PN}-es3 ${PN}-es5 ${PN}-es6 ${PN}-es8 ${PN}-es9"
+RRECOMMENDS_${PN} += "${PN}-es3 ${PN}-es5 ${PN}-es6 ${PN}-es8 ${PN}-es9"
+FILES_${PN}-es3 = "${libdir}/ES3*/* ${bindir}/ES3*/*"
+FILES_${PN}-es5 = "${libdir}/ES5*/* ${bindir}/ES5*/*"
+FILES_${PN}-es6 = "${libdir}/ES6*/* ${bindir}/ES6*/*"
+FILES_${PN}-es8 = "${libdir}/ES8*/* ${bindir}/ES8*/*"
+FILES_${PN}-es9 = "${libdir}/ES9*/* ${bindir}/ES9*/*"
+
+# Stop shlib code from picking a subpackage
+PRIVATE_LIBS_${PN}-es3 = "libGLESv2.so libIMGegl.so libsrv_um.so libOpenVG.so libpvr2d.so libsrv_init.so libEGL.so libsrv_um_dri.so libOpenVGU.so libglslcompiler.so libGLES_CM.so"
+PRIVATE_LIBS_${PN}-es5 = "libGLESv2.so libIMGegl.so libsrv_um.so libOpenVG.so libpvr2d.so libsrv_init.so libEGL.so libsrv_um_dri.so libOpenVGU.so libglslcompiler.so libGLES_CM.so"
+PRIVATE_LIBS_${PN}-es6 = "libGLESv2.so libIMGegl.so libsrv_um.so libOpenVG.so libpvr2d.so libsrv_init.so libEGL.so libsrv_um_dri.so libOpenVGU.so libglslcompiler.so libGLES_CM.so"
+PRIVATE_LIBS_${PN}-es8 = "libGLESv2.so libIMGegl.so libsrv_um.so libOpenVG.so libpvr2d.so libsrv_init.so libEGL.so libsrv_um_dri.so libOpenVGU.so libglslcompiler.so libGLES_CM.so"
+PRIVATE_LIBS_${PN}-es9 = "libGLESv2.so libIMGegl.so libsrv_um.so libOpenVG.so libpvr2d.so libsrv_init.so libEGL.so libsrv_um_dri.so libOpenVGU.so libglslcompiler.so libGLES_CM.so"
+
+PACKAGES =+ "${PN}-x11wsegl ${PN}-driwsegl"
+FILES_${PN}-x11wsegl = "${libdir}/libpvrPVR2D_X11WSEGL.so* ${bindir}/x* ${bindir}/*x"
+FILES_${PN}-driwsegl = "${libdir}/libpvrPVR2D_DRIWSEGL.so* ${libdir}/libsrv_um_dri*"
+
+X11_SEGL = " ${PN}-x11wsegl-es2 ${PN}-x11wsegl-es3 ${PN}-x11wsegl-es5 ${PN}-x11wsegl-es6 ${PN}-x11wsegl-es8 ${PN}-x11wsegl-es9 ${PN}-driwsegl-es2 ${PN}-driwsegl-es3 ${PN}-driwsegl-es5 ${PN}-driwsegl-es6 ${PN}-driwsegl-es8 ${PN}-driwsegl-es9"
+PACKAGES =+ "${X11_SEGL}"
+FILES_${PN}-x11wsegl-es2 = "${libdir}/ES2*/libpvrPVR2D_X11WSEGL.so.* ${bindir}/ES2*/x* ${bindir}/ES2*/*x"
+FILES_${PN}-x11wsegl-es3 = "${libdir}/ES3*/libpvrPVR2D_X11WSEGL.so.* ${bindir}/ES3*/x* ${bindir}/ES3*/*x"
+FILES_${PN}-x11wsegl-es5 = "${libdir}/ES5*/libpvrPVR2D_X11WSEGL.so.* ${bindir}/ES5*/x* ${bindir}/ES5*/*x"
+FILES_${PN}-x11wsegl-es6 = "${libdir}/ES6*/libpvrPVR2D_X11WSEGL.so.* ${bindir}/ES6*/x* ${bindir}/ES6*/*x"
+FILES_${PN}-x11wsegl-es8 = "${libdir}/ES8*/libpvrPVR2D_X11WSEGL.so.* ${bindir}/ES8*/x* ${bindir}/ES8*/*x"
+FILES_${PN}-x11wsegl-es9 = "${libdir}/ES9*/libpvrPVR2D_X11WSEGL.so.* ${bindir}/ES9*/x* ${bindir}/ES9*/*x"
+RRECOMMENDS_${PN}-x11wsegl = " ${PN}-x11wsegl-es2 ${PN}-x11wsegl-es3 ${PN}-x11wsegl-es5 ${PN}-x11wsegl-es6 ${PN}-x11wsegl-es8 ${PN}-x11wsegl-es9"
+
+FILES_${PN}-driwsegl-es2 = "${libdir}/ES2*/libpvrPVR2D_DRIWSEGL.so.* ${libdir}/ES2*/libsrv_um_dri*"
+FILES_${PN}-driwsegl-es3 = "${libdir}/ES3*/libpvrPVR2D_DRIWSEGL.so.* ${libdir}/ES3*/libsrv_um_dri*"
+FILES_${PN}-driwsegl-es5 = "${libdir}/ES5*/libpvrPVR2D_DRIWSEGL.so.* ${libdir}/ES5*/libsrv_um_dri*"
+FILES_${PN}-driwsegl-es6 = "${libdir}/ES6*/libpvrPVR2D_DRIWSEGL.so.* ${libdir}/ES6*/libsrv_um_dri*"
+FILES_${PN}-driwsegl-es8 = "${libdir}/ES8*/libpvrPVR2D_DRIWSEGL.so.* ${libdir}/ES8*/libsrv_um_dri*"
+FILES_${PN}-driwsegl-es9 = "${libdir}/ES9*/libpvrPVR2D_DRIWSEGL.so.* ${libdir}/ES9*/libsrv_um_dri*"
+RRECOMMENDS_${PN}-driwsegl = " ${PN}-driwsegl-es2 ${PN}-driwsegl-es3 ${PN}-driwsegl-es5 ${PN}-driwsegl-es6 ${PN}-driwsegl-es8 ${PN}-driwsegl-es9"
+
+CONFFILES_${PN} = "${sysconfdir}/powervr.ini"
+
+FILES_${PN} = "${sysconfdir} ${libdir}/*.so* ${bindir}/${PVR_INIT} ${bindir}/cputype ${bindir}/*"
+
+FILES_xserver-kdrive-powervrsgx = "${bindir}/Xsgx"
+FILES_${PN}-tests = "${bindir}/*test*"
+FILES_${PN}-dbg = "${libdir}/.debug/* ${bindir}/.debug/* \
+                   ${libdir}/ES*/.debug ${bindir}/*/.debug\
+                   ${bindir}/SGX/demos/*/.debug/* \
+                   ${bindir}/SGX/trainingcourses/*/.debug/* \
+"
+
+FILES_${PN}-x11demos = "${bindir}/SGX/demos/X11/* ${prefix}/share/applications "
+RRECOMMENDS_${PN}-x11demos = "${PN}-x11wsegl"
+
+FILES_${PN}-x11trainingcourses = "${bindir}/SGX/trainingcourses/X11/*"
+RRECOMMENDS_${PN}-x11trainingcourses = "${PN}-x11wsegl"
+
+# The libs need the kernel-modules
+RRECOMMENDS_${PN} += "omap3-sgx-modules-x11"
+
+# The initscript calls fbset, cputype calls devmem2
+RDEPENDS_${PN} += "fbset devmem2"
+
+#HACK! These are binaries, so we can't guarantee that LDFLAGS match :(
+INSANE_SKIP_${PN} = "ldflags dev-so"
+INSANE_SKIP_${PN}-es3 = "ldflags dev-so staticdev"
+INSANE_SKIP_${PN}-es5 = "ldflags dev-so staticdev"
+INSANE_SKIP_${PN}-es6 = "ldflags dev-so staticdev"
+INSANE_SKIP_${PN}-es8 = "ldflags dev-so staticdev"
+INSANE_SKIP_${PN}-es9 = "ldflags dev-so staticdev"
+INSANE_SKIP_${PN}-x11demos = "ldflags dev-so useless-rpaths"
+INSANE_SKIP_${PN}-x11wsegl = "ldflags dev-so"
+INSANE_SKIP_${PN}-x11wsegl-es3 = "ldflags dev-so"
+INSANE_SKIP_${PN}-x11wsegl-es5 = "ldflags dev-so"
+INSANE_SKIP_${PN}-x11wsegl-es6 = "ldflags dev-so"
+INSANE_SKIP_${PN}-x11wsegl-es8 = "ldflags dev-so"
+INSANE_SKIP_${PN}-x11wsegl-es9 = "ldflags dev-so"
+INSANE_SKIP_${PN}-driwsegl = "ldflags dev-so"
+INSANE_SKIP_${PN}-driwsegl-es3 = "ldflags dev-so"
+INSANE_SKIP_${PN}-driwsegl-es5 = "ldflags dev-so"
+INSANE_SKIP_${PN}-driwsegl-es6 = "ldflags dev-so"
+INSANE_SKIP_${PN}-driwsegl-es8 = "ldflags dev-so"
+INSANE_SKIP_${PN}-driwsegl-es9 = "ldflags dev-so"
+INSANE_SKIP_${PN}-tests = "ldflags"
+INSANE_SKIP_xserver-kdrive-powervrsgx = "ldflags"
+INSANE_SKIP_${PN}-dev = "ldflags dev-so"
+
+inherit update-rc.d
+
+INITSCRIPT_NAME = "pvr-init"
+INITSCRIPT_PARAMS = "start 30 5 2 . stop 40 0 1 6 ."
+
+# Append to update-rc.d postinst
+pkg_postinst_${PN}_append() {
+rm -f $D${sysconfdir}/powervr-esrev
+
+ln -sf /usr/lib/libXdmcp.so.6.0.0 /usr/lib/libXdmcp.so.0
+ln -sf /usr/lib/libXau.so.6.0.0 /usr/lib/libXau.so.0
+
+}
+
+pkg_postinst_${PN}-x11wsegl() {
+rm -f $D${sysconfdir}/powervr-esrev
+
+echo "[default]" > $D${sysconfdir}/powervr.ini
+echo "WindowSystem=libpvrPVR2D_X11WSEGL.so.1" >> $D${sysconfdir}/powervr.ini
+}
+
+pkg_postinst_${PN}-driwsegl() {
+rm -f $D${sysconfdir}/powervr-esrev
+}

recipes-graphics/libgles/libgles-omap3-x11_4.09.00.01.bb

@@ -0,0 +1,90 @@
+require libgles-omap3-x11.inc
+
+LICENSE = "TI-TSPA"
+
+PR = "${INC_PR}.3"
+
+DEFAULT_PREFERENCE = "-1"
+
+BINLOCATION_omap3 = "${S}/gfx_rel_es3.x"
+BINLOCATION_ti816x = "${S}/gfx_rel_es6.x"
+BINLOCATION_ti814x = "${S}/gfx_rel_es6.x"
+BINLOCATION_ti33x = "${S}/gfx_rel_es8.x"
+
+PLATFORM = "LinuxARMV7"
+PVR_INIT = "pvrsrvctl"
+
+# download required binary distribution from:
+# http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/latest/index_FDS.html
+# see libgles-omap3.inc for detailed installation instructions
+
+SGXPV = "4_09_00_01"
+IMGPV = "1.9.2188537"
+
+TI_BIN_UNPK_WDEXT := "/Graphics_SDK_${SGXPV}"
+
+# Select the corresponding hardfp/softfp filename and checksums based on tune flags
+BINFILE_SOFTFP = "Graphics_SDK_setuplinux_${SGXPV}_minimal_demos.bin"
+MD5SUM_SOFTFP = "bd35e9d8843aff3a2aca9d41e7db1c7d"
+SHA256SUM_SOFTFP = "eb37f75ddde4640b09e760fa86e689beb394330ecdf68786188c34f249247647"
+
+BINFILE_HARDFP = "Graphics_SDK_setuplinux_${SGXPV}_hardfp_minimal_demos.bin"
+MD5SUM_HARDFP = "c9f656dce062d1ab10afffd4dfb71b67"
+SHA256SUM_HARDFP = "dbfeba8e1298f139495816334edec1455e6b49b1e11bd1b2aa0a888e5788bb6b"
+
+BINFILE = "${@base_contains('TUNE_FEATURES', 'callconvention-hard', '${BINFILE_HARDFP}', '${BINFILE_SOFTFP}', d)}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE} \
+           file://cputype \
+           file://rc.pvr \
+           file://rc_dri.pvr \
+           file://sample.desktop \
+           file://99-bufferclass.rules  \
+"
+
+SRC_URI[md5sum] := "${@base_contains('TUNE_FEATURES', 'callconvention-hard', '${MD5SUM_HARDFP}', '${MD5SUM_SOFTFP}', d)}"
+SRC_URI[sha256sum] := "${@base_contains('TUNE_FEATURES', 'callconvention-hard', '${SHA256SUM_HARDFP}', '${SHA256SUM_SOFTFP}', d)}"
+
+S = "${WORKDIR}/Graphics_SDK_${SGXPV}"
+
+LIBGLESWINDOWSYSTEM ?= "libpvrPVR2D_DRIWSEGL.so"
+
+do_configure_append() {
+
+    # Change PVR server's user mode library to point to DRI
+    for drifile in $(find ${S} -name "libsrv_um_dri.so"); do
+    if [ "$drifile" != "" ]
+    then
+        dir=$(dirname ${drifile})
+        if [ "$SUPPORT_XORG" = "1" ]
+        then
+            mv ${dir}/libsrv_um_dri.so ${dir}/libsrv_um.so
+        else
+            rm -rf ${dir}/libsrv_um_dri.so
+        fi
+    fi
+
+    done
+}
+
+do_install_append() {
+
+    # In this version of the graphics SDK the following directories do not exist:
+    #    /GFX_Linux_SDK/OGLES/SDKPackage/Builds/OGLES/Include/pvr2d.h (doesn't exist)
+    #    /GFX_Linux_SDK/OGLES/SDKPackage/Builds/OGLES/Include/GLES/egltypes.h (doesn't exist)
+    # Therefore, need to copy these files manually at the only location that they do exist
+    cp -pPr ${S}/include/pvr2d/*.h ${D}${includedir}
+    cp -pPr ${S}/include/OGLES/GLES ${D}${includedir}/
+
+    rm -f ${D}${sysconfdir}/init.d/pvr-init
+
+    if [ "$SUPPORT_XORG" = "1" ]; then
+        cp -pP ${WORKDIR}/rc_dri.pvr ${D}${sysconfdir}/init.d/pvr-init
+    else
+        cp -pP ${WORKDIR}/rc.pvr ${D}${sysconfdir}/init.d/pvr-init
+    fi
+
+}
+
+RRECOMMENDS_${PN}-x11demos = "${PN}-driwsegl"
+RRECOMMENDS_${PN}-x11trainingcourses = "${PN}-driwsegl"

recipes-graphics/libgles/libgles-omap3.inc

@@ -437,4 +437,3 @@ echo "WindowSystem=libpvrPVR2D_X11WSEGL.so.1" >> $D${sysconfdir}/powervr.ini
 pkg_postinst_${PN}-driwsegl() {
 rm -f $D${sysconfdir}/powervr-esrev
 }
-

recipes-graphics/libgles/libgles-omap3/cputype

@@ -1,17 +1,25 @@
 #!/bin/sh
 
-machine_id() { # return the machine ID
+legacy_machine_id() { # return the machine ID
 	awk 'BEGIN { FS=": " } /Hardware/ \
 		{ gsub(" ", "_", $2); print tolower($2) } ' </proc/cpuinfo
 }
 
-if [ "$(machine_id)" = "ti8168evm" ] ; then
+machine_id() { # return the machine ID
+	cat /proc/cpuinfo | grep Hardware | awk -F" " '{ print $4 }'
+}
+
+if [ "$(machine_id)" = "ti8168evm" -o "$(legacy_machine_id)" = "ti8168evm" ] ; then
 	echo TI816x
-elif [ "$(machine_id)" = "am335xevm" ] ; then
-    echo TI33XX
+elif [ "$(machine_id)" = "AM33XX" -o "$(legacy_machine_id)" = "am335xevm" ] ; then
+	echo TI33XX
+elif [ "$(machine_id)" = "AM43" ] ; then
+	echo TI43XX
 else
 	devmem2 0x4800244c | \
 	grep 'Read at address' | \
 	sed -e 's/.*): //' | \
-	sed -e 's/0x00005C00/OMAP3503/' -e 's/0x00001C00/OMAP3515/' -e 's/0x00004C00/OMAP3525/' -e 's/0x00000C00/OMAP3530/' -e 's/0x00005E00/OMAP3503/' -e 's/0x00001E00/OMAP3515/' -e 's/0x00004E00/OMAP3525/' -e 's/0x00000E00/OMAP3530/' -e 's/0x00000CC0/OMAP3530/'
+	sed -e 's/0x00005C00/OMAP3503/' -e 's/0x00001C00/OMAP3515/' -e 's/0x00004C00/OMAP3525/' -e 's/0x00000C00/OMAP3530/' \
+		-e 's/0x00005E00/OMAP3503/' -e 's/0x00001E00/OMAP3515/' -e 's/0x00004E00/OMAP3525/' -e 's/0x00000E00/OMAP3530/' \
+		-e 's/0x00000CC0/OMAP3530/'
 fi

recipes-graphics/libgles/libgles-omap3_4.03.00.02.bb

@@ -1,30 +0,0 @@
-BINLOCATION_omap3  = "${S}/gfx_rel_es3.x"
-BINLOCATION_ti816x = "${S}/gfx_rel_es6.x"
-
-ES2LOCATION = "${S}/gfx_rel_es2.x"
-ES3LOCATION = "${S}/gfx_rel_es3.x"
-ES5LOCATION = "${S}/gfx_rel_es5.x"
-ES6LOCATION = "${S}/gfx_rel_es6.x"
-
-require libgles-omap3.inc
-
-# download required binary distribution from:
-# http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/latest/index_FDS.html
-# see libgles-omap3.inc for detailed installation instructions
-
-SGXPV = "4_03_00_02"
-IMGPV = "1.6.16.3977"
-BINFILE := "Graphics_SDK_setuplinux_${SGXPV}.bin"
-TI_BIN_UNPK_WDEXT := "/Graphics_SDK_${SGXPV}"
-
-SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE} \
-                   file://cputype \
-                   file://rc.pvr \
-                   file://sample.desktop \
-                   file://99-bufferclass.rules  \
-"
-
-SRC_URI[md5sum] = "ff8c1f2b8e4cb42f4ced6a613b081ada"
-SRC_URI[sha256sum] = "cdb0bd3964e107733d632aa8224e0537b05c1ffac34befc036423458c8d75255"
-
-S = "${WORKDIR}/Graphics_SDK_${SGXPV}"

recipes-graphics/libgles/libgles-omap3_4.05.00.03.bb

@@ -5,6 +5,8 @@ BINLOCATION_ti33x = "${S}/gfx_rel_es8.x"
 
 require libgles-omap3.inc
 
+DEFAULT_PREFERENCE_omap3 = "99"
+
 # download required binary distribution from:
 # http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/latest/index_FDS.html
 # see libgles-omap3.inc for detailed installation instructions

recipes-graphics/libgles/libgles-omap3_4.08.00.01.bb

@@ -1,8 +1,6 @@
 require libgles-omap3.inc
 
-LICENSE = "TSPA"
-
-DEFAULT_PREFERENCE = "-1"
+LICENSE = "TI-TSPA"
 
 BINLOCATION_omap3  = "${S}/gfx_rel_es3.x"
 BINLOCATION_ti816x = "${S}/gfx_rel_es6.x"

recipes-graphics/libgles/libgles-omap3_4.08.00.02.bb

@@ -1,8 +1,6 @@
 require libgles-omap3.inc
 
-LICENSE = "TSPA"
-
-DEFAULT_PREFERENCE = "-1"
+LICENSE = "TI-TSPA"
 
 BINLOCATION_omap3  = "${S}/gfx_rel_es3.x"
 BINLOCATION_ti816x = "${S}/gfx_rel_es6.x"

recipes-graphics/libgles/libgles-omap3_4.09.00.01.bb

@@ -1,10 +1,10 @@
-require libgles-omap3.inc
+require libgles-omap3-no-x.inc
 
-LICENSE = "TSPA"
+LICENSE = "TI-TSPA"
 
-DEFAULT_PREFERENCE = "-1"
+PR = "${INC_PR}.3"
 
-BINLOCATION_omap3  = "${S}/gfx_rel_es3.x"
+BINLOCATION_omap3 = "${S}/gfx_rel_es3.x"
 BINLOCATION_ti816x = "${S}/gfx_rel_es6.x"
 BINLOCATION_ti814x = "${S}/gfx_rel_es6.x"
 BINLOCATION_ti33x = "${S}/gfx_rel_es8.x"
@@ -18,58 +18,29 @@ PVR_INIT = "pvrsrvctl"
 
 SGXPV = "4_09_00_01"
 IMGPV = "1.9.2188537"
-BINFILE = "Graphics_SDK_setuplinux_${SGXPV}_minimal_demos.bin"
+
 TI_BIN_UNPK_WDEXT := "/Graphics_SDK_${SGXPV}"
+
+# Select the corresponding hardfp/softfp filename and checksums based on tune flags
+BINFILE_SOFTFP = "Graphics_SDK_setuplinux_${SGXPV}_minimal_demos.bin"
+MD5SUM_SOFTFP = "bd35e9d8843aff3a2aca9d41e7db1c7d"
+SHA256SUM_SOFTFP = "eb37f75ddde4640b09e760fa86e689beb394330ecdf68786188c34f249247647"
+
+BINFILE_HARDFP = "Graphics_SDK_setuplinux_${SGXPV}_hardfp_minimal_demos.bin"
+MD5SUM_HARDFP = "c9f656dce062d1ab10afffd4dfb71b67"
+SHA256SUM_HARDFP = "dbfeba8e1298f139495816334edec1455e6b49b1e11bd1b2aa0a888e5788bb6b"
+
+BINFILE = "${@base_contains('TUNE_FEATURES', 'callconvention-hard', '${BINFILE_HARDFP}', '${BINFILE_SOFTFP}', d)}"
+
 SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE} \
            file://cputype \
            file://rc.pvr \
-           file://rc_dri.pvr \
-           file://sample.desktop \
            file://99-bufferclass.rules  \
 "
-SRC_URI[md5sum] = "bd35e9d8843aff3a2aca9d41e7db1c7d"
-SRC_URI[sha256sum] = "eb37f75ddde4640b09e760fa86e689beb394330ecdf68786188c34f249247647"
+
+SRC_URI[md5sum] := "${@base_contains('TUNE_FEATURES', 'callconvention-hard', '${MD5SUM_HARDFP}', '${MD5SUM_SOFTFP}', d)}"
+SRC_URI[sha256sum] := "${@base_contains('TUNE_FEATURES', 'callconvention-hard', '${SHA256SUM_HARDFP}', '${SHA256SUM_SOFTFP}', d)}"
 
 S = "${WORKDIR}/Graphics_SDK_${SGXPV}"
 
-LIBGLESWINDOWSYSTEM ?= "${@base_contains('DISTRO_FEATURES', 'x11',"libpvrPVR2D_DRIWSEGL.so" ,"libpvrPVR2D_FRONTWSEGL.so.1", d)}"
-
-do_configure_append() {
-
-    # Change PVR server's user mode library to point to DRI
-    for drifile in $(find ${S} -name "libsrv_um_dri.so"); do
-    if [ "$drifile" != "" ]
-    then
-        dir=$(dirname ${drifile})
-        if [ "$SUPPORT_XORG" = "1" ]
-        then
-            mv ${dir}/libsrv_um_dri.so ${dir}/libsrv_um.so
-        else
-            rm -rf ${dir}/libsrv_um_dri.so
-        fi
-    fi
-
-    done
-}
-
-do_install_append() {
-
-    # In this version of the graphics SDK the following directories do not exist:
-    #    /GFX_Linux_SDK/OGLES/SDKPackage/Builds/OGLES/Include/pvr2d.h (doesn't exist)
-    #    /GFX_Linux_SDK/OGLES/SDKPackage/Builds/OGLES/Include/GLES/egltypes.h (doesn't exist)
-    # Therefore, need to copy these files manually at the only location that they do exist
-    cp -pPr ${S}/include/pvr2d/*.h ${D}${includedir}
-    cp -pPr ${S}/include/OGLES/GLES ${D}${includedir}/
-
-    rm ${D}${sysconfdir}/init.d/pvr-init
-
-    if [ "$SUPPORT_XORG" = "1" ]; then
-        cp -pP ${WORKDIR}/rc_dri.pvr ${D}${sysconfdir}/init.d/pvr-init
-    else
-        cp -pP ${WORKDIR}/rc.pvr ${D}${sysconfdir}/init.d/pvr-init
-    fi
-
-}
-
-RRECOMMENDS_${PN}-x11demos = "${PN}-driwsegl"
-RRECOMMENDS_${PN}-x11trainingcourses = "${PN}-driwsegl"
+LIBGLESWINDOWSYSTEM ?= "libpvrPVR2D_FRONTWSEGL.so.1"

recipes-graphics/libgles/libgles-omap3_5.00.00.01.bb

@@ -0,0 +1,50 @@
+require libgles-omap3-no-x.inc
+
+LICENSE = "TI-TSPA"
+
+PR = "${INC_PR}.2"
+
+BINLOCATION_omap3 = "${S}/gfx_rel_es3.x"
+BINLOCATION_ti816x = "${S}/gfx_rel_es6.x"
+BINLOCATION_ti814x = "${S}/gfx_rel_es6.x"
+BINLOCATION_ti33x = "${S}/gfx_rel_es8.x"
+BINLOCATION_ti43x = "${S}/gfx_rel_es9.x"
+
+PLATFORM = "LinuxARMV7"
+PVR_INIT = "pvrsrvctl"
+
+SGXPV = "5_00_00_01"
+IMGPV = "1.10.2359475"
+
+TI_BIN_UNPK_WDEXT := "/Graphics_SDK_${SGXPV}"
+
+BINFILE_HARDFP = "Graphics_SDK_setuplinux_${SGXPV}_alpha_hardfp_minimal_demos.bin"
+MD5SUM_HARDFP = "ae6125d7f8a313ea5c02afded893052d"
+SHA256SUM_HARDFP = "c2782a2f85024741722b936ec9dca66b858ae8561aa71b693f11e12d8c0385e0"
+
+# For now we only have hardfp version
+python __anonymous() {
+    tunes = bb.data.getVar("TUNE_FEATURES", d, 1)
+    if not tunes:
+        return
+    pkgn = bb.data.getVar("PN", d, 1)
+    pkgv = bb.data.getVar("PV", d, 1)
+    if "callconvention-hard" not in tunes:
+        bb.warn("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
+        raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
+}
+
+BINFILE := "${BINFILE_HARDFP}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/gfxsdk/${SGXPV}/exports/${BINFILE} \
+           file://cputype \
+           file://rc.pvr \
+           file://99-bufferclass.rules  \
+"
+
+SRC_URI[md5sum] := "${MD5SUM_HARDFP}"
+SRC_URI[sha256sum] := "${SHA256SUM_HARDFP}"
+
+S = "${WORKDIR}/Graphics_SDK_${SGXPV}"
+
+LIBGLESWINDOWSYSTEM ?= "libpvrPVR2D_FRONTWSEGL.so.1"

recipes-graphics/libgles/libgles-omap3_5.01.00.01.bb

@@ -0,0 +1,50 @@
+require libgles-omap3-no-x.inc
+
+LICENSE = "TI-TSPA"
+
+PR = "${INC_PR}.2"
+
+BINLOCATION_omap3 = "${S}/gfx_rel_es3.x"
+BINLOCATION_ti816x = "${S}/gfx_rel_es6.x"
+BINLOCATION_ti814x = "${S}/gfx_rel_es6.x"
+BINLOCATION_ti33x = "${S}/gfx_rel_es8.x"
+BINLOCATION_ti43x = "${S}/gfx_rel_es9.x"
+
+PLATFORM = "LinuxARMV7"
+PVR_INIT = "pvrsrvctl"
+
+SGXPV = "5_01_00_01"
+IMGPV = "1.10.2359475"
+
+TI_BIN_UNPK_WDEXT := "/Graphics_SDK_${SGXPV}"
+
+BINFILE_HARDFP = "Graphics_SDK_setuplinux_hardfp_${SGXPV}.bin"
+MD5SUM_HARDFP = "0ee7d59808330d442a51c0990c2cb30e"
+SHA256SUM_HARDFP = "769daae439677a7a85bbbced14cee4f85b19823e0b99560078d0a864c525c128"
+
+# For now we only have hardfp version
+python __anonymous() {
+    tunes = bb.data.getVar("TUNE_FEATURES", d, 1)
+    if not tunes:
+        return
+    pkgn = bb.data.getVar("PN", d, 1)
+    pkgv = bb.data.getVar("PV", d, 1)
+    if "callconvention-hard" not in tunes:
+        bb.warn("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
+        raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
+}
+
+BINFILE := "${BINFILE_HARDFP}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/gfxsdk/${SGXPV}/exports/${BINFILE} \
+           file://cputype \
+           file://rc.pvr \
+           file://99-bufferclass.rules  \
+"
+
+SRC_URI[md5sum] := "${MD5SUM_HARDFP}"
+SRC_URI[sha256sum] := "${SHA256SUM_HARDFP}"
+
+S = "${WORKDIR}/Graphics_SDK_${SGXPV}"
+
+LIBGLESWINDOWSYSTEM ?= "libpvrPVR2D_FRONTWSEGL.so.1"

recipes-graphics/libgles/libgles-omap3_5.01.01.01.bb

@@ -0,0 +1,50 @@
+require libgles-omap3-no-x.inc
+
+LICENSE = "TI-TSPA"
+
+PR = "${INC_PR}.1"
+
+BINLOCATION_omap3 = "${S}/gfx_rel_es3.x"
+BINLOCATION_ti816x = "${S}/gfx_rel_es6.x"
+BINLOCATION_ti814x = "${S}/gfx_rel_es6.x"
+BINLOCATION_ti33x = "${S}/gfx_rel_es8.x"
+BINLOCATION_ti43x = "${S}/gfx_rel_es9.x"
+
+PLATFORM = "LinuxARMV7"
+PVR_INIT = "pvrsrvctl"
+
+SGXPV = "5_01_01_01"
+IMGPV = "1.10.2359475"
+
+TI_BIN_UNPK_WDEXT := "/Graphics_SDK_${SGXPV}"
+
+BINFILE_HARDFP = "Graphics_SDK_setuplinux_hardfp_${SGXPV}.bin"
+MD5SUM_HARDFP = "94acdbd20152c905939c2448d5e80a72"
+SHA256SUM_HARDFP = "7f647bf45a5ce8ba9aaa28c4afe85fced4275f9a4567a1886d4460b76c9051ae"
+
+# For now we only have hardfp version
+python __anonymous() {
+    tunes = bb.data.getVar("TUNE_FEATURES", d, 1)
+    if not tunes:
+        return
+    pkgn = bb.data.getVar("PN", d, 1)
+    pkgv = bb.data.getVar("PV", d, 1)
+    if "callconvention-hard" not in tunes:
+        bb.warn("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
+        raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
+}
+
+BINFILE := "${BINFILE_HARDFP}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/gfxsdk/${SGXPV}/exports/${BINFILE} \
+           file://cputype \
+           file://rc.pvr \
+           file://99-bufferclass.rules  \
+"
+
+SRC_URI[md5sum] := "${MD5SUM_HARDFP}"
+SRC_URI[sha256sum] := "${SHA256SUM_HARDFP}"
+
+S = "${WORKDIR}/Graphics_SDK_${SGXPV}"
+
+LIBGLESWINDOWSYSTEM ?= "libpvrPVR2D_FRONTWSEGL.so.1"

recipes-graphics/libgles/omap5-sgx-ddk-um-linux_1.9.0.12.bb

@@ -0,0 +1,28 @@
+DESCRIPTION = "Userspace libraries for SGX"
+HOMEPAGE = "http://downloads.ti.com/dsps/dsps_public_sw/gfxsdk"
+LICENSE = "TI-TSPA"
+LIC_FILES_CHKSUM = "file://OMAP5-Linux-Graphics-DDK-UM-Manifest.doc;md5=360d293df455e4f2d363bb4014a49603"
+
+SRC_URI = "git://git.ti.com/graphics/omap5-sgx-ddk-um-linux.git;protocol=git"
+SRCREV = "994922a5655c63b05343a9238cb30e6ef61744be"
+
+PR = "r2"
+PROVIDES += "virtual/egl virtual/libgles1 virtual/libgles2"
+
+RREPLACES_${PN} = "libegl libgles1 libgles2"
+RREPLACES_${PN}-dev = "libegl-dev libgles1-dev libgles2-dev"
+RREPLACES_${PN}-dbg = "libegl-dbg"
+
+S = "${WORKDIR}/git"
+
+do_install () {
+    oe_runmake install DESTDIR=${D}
+}
+
+FILES_${PN} =  "${bindir}/*"
+FILES_${PN} += " ${libdir}/*"
+FILES_${PN} +=  "${includedir}/* /usr/share/sgx-lib/"
+
+INHIBIT_PACKAGE_STRIP = "1"
+
+INSANE_SKIP_${PN} += "dev-so"

recipes-graphics/mesa/mesa-dri_8.0.4.bbappend

@@ -1 +0,0 @@
-require mesa-omap3-common.inc

recipes-graphics/mesa/mesa-dri_git.bbappend

@@ -1 +0,0 @@
-require mesa-omap3-common.inc

recipes-graphics/mesa/mesa-omap3-common.inc

@@ -1,7 +0,0 @@
-PRINC := "${@int(PRINC) + 1}"
-
-# avoid providing conflicts for libgles-omap3 compatibles
-PROVIDES_omap3 = "virtual/libgl"
-PROVIDES_ti814x = "virtual/libgl"
-PROVIDES_ti816x = "virtual/libgl"
-PROVIDES_ti33x = "virtual/libgl"

recipes-graphics/xorg-driver/xf86-video-omap_git.bb

@@ -1,31 +0,0 @@
-require recipes-graphics/xorg-driver/xorg-driver-video.inc
-
-SUMMARY = "X.Org X server -- TI OMAP integrated graphics chipsets driver"
-
-DESCRIPTION = "Open-source X.org graphics driver for TI OMAP graphics \
-Currently relies on a closed-source submodule for EXA acceleration on \
-the following chipsets: \
-  + OMAP3430 \
-  + OMAP3630 \
-  + OMAP4430 \
-  + OMAP4460 \
-  + OMAP5430 \
-  + OMAP5432 \
-\
-NOTE: this driver is work in progress..  you probably don't want to try \
-and use it yet.  The API/ABI between driver and kernel, and driver and \
-acceleration submodules is not stable yet.  This driver requires the \
-omapdrm kernel driver w/ GEM support. \
-"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=10ce5de3b111315ea652a5f74ec0c602"
-
-DEPENDS += "virtual/libx11 drm xf86driproto udev"
-
-SRCREV = "653ccadb38c87be565df3fbf2ff24a0cbe5a5e98"
-PR = "${INC_PR}.1"
-PV = "0.4.2+gitr${SRCPV}"
-
-SRC_URI = "git://anongit.freedesktop.org/xorg/driver/xf86-video-omap;protocol=git"
-
-S = "${WORKDIR}/git"

recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend

@@ -1,5 +1,2 @@
-PRINC = "2"
-
-THISDIR := "${@os.path.dirname(bb.data.getVar('FILE', d, True))}"
-FILESPATH =. "${@base_set_filespath(["${THISDIR}/${PN}"], d)}:"
-
+PRINC := "${@int(PRINC) + 1}"
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"

recipes-kernel/linux/linux-3.0+3.1rc/beagle/0001-UNFINISHED-OMAP3-beagle-add-support-for-expansionboa.patch

@@ -1,340 +0,0 @@
-From 3721255965a94417996df6f2402a288aa09cb5b2 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Thu, 21 Jul 2011 14:29:42 +0200
-Subject: [PATCH 1/3] UNFINISHED: OMAP3: beagle: add support for expansionboards
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- arch/arm/mach-omap2/board-omap3beagle.c |  266 +++++++++++++++++++++++++++++++
- 1 files changed, 266 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
-index 32f5f89..f26a9a8 100644
---- a/arch/arm/mach-omap2/board-omap3beagle.c
-+++ b/arch/arm/mach-omap2/board-omap3beagle.c
-@@ -21,6 +21,7 @@
- #include <linux/io.h>
- #include <linux/leds.h>
- #include <linux/gpio.h>
-+#include <linux/irq.h>
- #include <linux/input.h>
- #include <linux/gpio_keys.h>
- #include <linux/opp.h>
-@@ -156,6 +157,167 @@ static void __init omap3_beagle_init_rev(void)
- 	}
- }
- 
-+char expansionboard_name[16];
-+
-+#if defined(CONFIG_WL12XX) || defined(CONFIG_WL12XX_MODULE)
-+#include <linux/regulator/fixed.h>
-+#include <linux/wl12xx.h>
-+
-+#define OMAP_BEAGLE_WLAN_EN_GPIO    (139)
-+#define OMAP_BEAGLE_BT_EN_GPIO      (138)
-+#define OMAP_BEAGLE_WLAN_IRQ_GPIO   (137)
-+#define OMAP_BEAGLE_FM_EN_BT_WU     (136)
-+
-+struct wl12xx_platform_data omap_beagle_wlan_data __initdata = {
-+	.irq = OMAP_GPIO_IRQ(OMAP_BEAGLE_WLAN_IRQ_GPIO),
-+	.board_ref_clock = 2, /* 38.4 MHz */
-+};
-+
-+static int gpios[] = {OMAP_BEAGLE_BT_EN_GPIO, OMAP_BEAGLE_FM_EN_BT_WU, -1};
-+static struct platform_device wl12xx_device = {
-+		.name		= "kim",
-+		.id			= -1,
-+		.dev.platform_data = &gpios,
-+};
-+
-+static struct omap2_hsmmc_info mmcbbt[] = {
-+ 	{
-+ 		.mmc		= 1,
-+ 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-+ 		.gpio_wp	= 29,
-+ 	},
-+	{
-+		.name		= "wl1271",
-+		.mmc		= 2,
-+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-+		.gpio_wp	= -EINVAL,
-+		.gpio_cd	= -EINVAL,
-+		.ocr_mask	= MMC_VDD_165_195,
-+		.nonremovable	= true,
-+	},
-+ 	{}	/* Terminator */
-+ };
-+
-+static struct regulator_consumer_supply beagle_vmmc2_supply = 
-+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
-+
-+static struct regulator_init_data beagle_vmmc2 = {
-+	.constraints = {
-+		.min_uV			= 1850000,
-+		.max_uV			= 1850000,
-+		.apply_uV		= true,
-+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-+					| REGULATOR_MODE_STANDBY,
-+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-+					| REGULATOR_CHANGE_STATUS,
-+	},
-+	.num_consumer_supplies = 1,
-+	.consumer_supplies = &beagle_vmmc2_supply,
-+};
-+
-+static struct fixed_voltage_config beagle_vwlan = {
-+	.supply_name = "vwl1271",
-+	.microvolts = 1800000,  /* 1.8V */
-+	.gpio = OMAP_BEAGLE_WLAN_EN_GPIO,
-+	.startup_delay = 70000, /* 70ms */
-+	.enable_high = 1,
-+	.enabled_at_boot = 0,
-+	.init_data = &beagle_vmmc2,
-+};
-+
-+static struct platform_device omap_vwlan_device = {
-+	.name           = "reg-fixed-voltage",
-+	.id             = 1,
-+	.dev = {
-+		.platform_data = &beagle_vwlan,
-+	},
-+};
-+#endif
-+
-+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
-+
-+#include <plat/mcspi.h>
-+#include <linux/spi/spi.h>
-+
-+#define OMAP3BEAGLE_GPIO_ENC28J60_IRQ 157
-+
-+static struct omap2_mcspi_device_config enc28j60_spi_chip_info = {
-+	.turbo_mode	= 0,
-+	.single_channel	= 1,	/* 0: slave, 1: master */
-+};
-+
-+static struct spi_board_info omap3beagle_zippy_spi_board_info[] __initdata = {
-+	{
-+		.modalias		= "enc28j60",
-+		.bus_num		= 4,
-+		.chip_select		= 0,
-+		.max_speed_hz		= 20000000,
-+		.controller_data	= &enc28j60_spi_chip_info,
-+	},
-+};
-+
-+static void __init omap3beagle_enc28j60_init(void)
-+{
-+	if ((gpio_request(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, "ENC28J60_IRQ") == 0) &&
-+	    (gpio_direction_input(OMAP3BEAGLE_GPIO_ENC28J60_IRQ) == 0)) {
-+		gpio_export(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, 0);
-+		omap3beagle_zippy_spi_board_info[0].irq	= OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_ENC28J60_IRQ);
-+		irq_set_irq_type(omap3beagle_zippy_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING);
-+	} else {
-+		printk(KERN_ERR "could not obtain gpio for ENC28J60_IRQ\n");
-+		return;
-+	}
-+
-+	spi_register_board_info(omap3beagle_zippy_spi_board_info,
-+			ARRAY_SIZE(omap3beagle_zippy_spi_board_info));
-+}
-+
-+#else
-+static inline void __init omap3beagle_enc28j60_init(void) { return; }
-+#endif
-+
-+#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
-+
-+#include <plat/mcspi.h>
-+#include <linux/spi/spi.h>
-+
-+#define OMAP3BEAGLE_GPIO_KS8851_IRQ 157
-+
-+static struct omap2_mcspi_device_config ks8851_spi_chip_info = {
-+	.turbo_mode	= 0,
-+	.single_channel	= 1,	/* 0: slave, 1: master */
-+};
-+
-+static struct spi_board_info omap3beagle_zippy2_spi_board_info[] __initdata = {
-+	{
-+		.modalias		= "ks8851",
-+		.bus_num		= 4,
-+		.chip_select		= 0,
-+		.max_speed_hz		= 36000000,
-+		.controller_data	= &ks8851_spi_chip_info,
-+	},
-+};
-+
-+static void __init omap3beagle_ks8851_init(void)
-+{
-+	if ((gpio_request(OMAP3BEAGLE_GPIO_KS8851_IRQ, "KS8851_IRQ") == 0) &&
-+	    (gpio_direction_input(OMAP3BEAGLE_GPIO_KS8851_IRQ) == 0)) {
-+		gpio_export(OMAP3BEAGLE_GPIO_KS8851_IRQ, 0);
-+		omap3beagle_zippy2_spi_board_info[0].irq	= OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_KS8851_IRQ);
-+		irq_set_irq_type(omap3beagle_zippy2_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING);
-+	} else {
-+		printk(KERN_ERR "could not obtain gpio for KS8851_IRQ\n");
-+		return;
-+	}
-+	
-+	spi_register_board_info(omap3beagle_zippy2_spi_board_info,
-+							ARRAY_SIZE(omap3beagle_zippy2_spi_board_info));
-+}
-+
-+#else
-+static inline void __init omap3beagle_ks8851_init(void) { return; }
-+#endif
-+
- static struct mtd_partition omap3beagle_nand_partitions[] = {
- 	/* All the partition sizes are listed in terms of NAND block size */
- 	{
-@@ -254,6 +416,12 @@ static struct omap2_hsmmc_info mmc[] = {
- 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
- 		.gpio_wp	= -EINVAL,
- 	},
-+	{
-+		.mmc		= 2,
-+		.caps       = MMC_CAP_4_BIT_DATA,
-+		.transceiver	= true,
-+		.ocr_mask	= 0x00100000,	/* 3.3V */
-+	},
- 	{}	/* Terminator */
- };
- 
-@@ -277,7 +445,15 @@ static int beagle_twl_gpio_setup(struct device *dev,
- 	mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
- 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
- 	mmc[0].gpio_cd = gpio + 0;
-+#if defined(CONFIG_WL12XX) || defined(CONFIG_WL12XX_MODULE)
-+	if(!strcmp(expansionboard_name, "bbtoys-wifi")) { 
-+		omap2_hsmmc_init(mmcbbt);
-+	} else {
-+		omap2_hsmmc_init(mmc);
-+	}
-+#else
- 	omap2_hsmmc_init(mmc);
-+#endif
- 
- 	/*
- 	 * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
-@@ -375,6 +551,19 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
-        },
- };
- 
-+#if defined(CONFIG_RTC_DRV_DS1307) || \
-+	defined(CONFIG_RTC_DRV_DS1307_MODULE)
-+
-+static struct i2c_board_info __initdata beagle_i2c2_zippy[] = {
-+	{
-+		I2C_BOARD_INFO("eeprom", 0x50),
-+		I2C_BOARD_INFO("ds1307", 0x68),
-+	},
-+};
-+#else
-+static struct i2c_board_info __initdata beagle_i2c2_zippy[] = {};
-+#endif
-+
- static int __init omap3_beagle_i2c_init(void)
- {
- 	omap3_pmic_get_config(&beagle_twldata,
-@@ -479,6 +668,15 @@ static struct omap_board_mux board_mux[] __initdata = {
- };
- #endif
- 
-+static int __init expansionboard_setup(char *str)
-+{
-+	if (!str)
-+		return -EINVAL;
-+	strncpy(expansionboard_name, str, 16);
-+	printk(KERN_INFO "Beagle expansionboard: %s\n", expansionboard_name);
-+	return 0;
-+}
-+
- static void __init beagle_opp_init(void)
- {
- 	int r = 0;
-@@ -542,6 +740,72 @@ static void __init omap3_beagle_init(void)
- 	/* REVISIT leave DVI powered down until it's needed ... */
- 	gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
- 
-+	if(!strcmp(expansionboard_name, "zippy")) 
-+	{
-+		printk(KERN_INFO "Beagle expansionboard: initializing enc28j60\n");
-+		omap3beagle_enc28j60_init();
-+		printk(KERN_INFO "Beagle expansionboard: assigning GPIO 141 and 162 to MMC1\n");
-+		mmc[1].gpio_wp = 141;
-+		mmc[1].gpio_cd = 162;
-+		printk(KERN_INFO "Beagle expansionboard: registering I2C2 for zippy board\n");
-+		omap_register_i2c_bus(2, 400,  beagle_i2c2_zippy,
-+							ARRAY_SIZE(beagle_i2c2_zippy));
-+
-+	}
-+	
-+	if(!strcmp(expansionboard_name, "zippy2")) 
-+	{
-+		printk(KERN_INFO "Beagle expansionboard: initializing ks_8851\n");
-+		omap3beagle_ks8851_init();
-+		printk(KERN_INFO "Beagle expansionboard: assigning GPIO 141 and 162 to MMC1\n");
-+		mmc[1].gpio_wp = 141;
-+		mmc[1].gpio_cd = 162;
-+		printk(KERN_INFO "Beagle expansionboard: registering I2C2 for zippy2 board\n");
-+		omap_register_i2c_bus(2, 400,  beagle_i2c2_zippy,
-+							ARRAY_SIZE(beagle_i2c2_zippy));		
-+	}
-+
-+	if(!strcmp(expansionboard_name, "trainer"))
-+	{
-+		printk(KERN_INFO "Beagle expansionboard: exporting GPIOs 130-141,162 to userspace\n");
-+		gpio_request(130, "sysfs");
-+		gpio_export(130, 1);
-+		gpio_request(131, "sysfs");
-+		gpio_export(131, 1);
-+		gpio_request(132, "sysfs");
-+		gpio_export(132, 1);
-+		gpio_request(133, "sysfs");
-+		gpio_export(133, 1);
-+		gpio_request(134, "sysfs");
-+		gpio_export(134, 1);
-+		gpio_request(135, "sysfs");
-+		gpio_export(135, 1);
-+		gpio_request(136, "sysfs");
-+		gpio_export(136, 1);
-+		gpio_request(137, "sysfs");
-+		gpio_export(137, 1);
-+		gpio_request(138, "sysfs");
-+		gpio_export(138, 1);
-+		gpio_request(139, "sysfs");
-+		gpio_export(139, 1);
-+		gpio_request(140, "sysfs");
-+		gpio_export(140, 1);
-+		gpio_request(141, "sysfs");
-+		gpio_export(141, 1);
-+		gpio_request(162, "sysfs");
-+		gpio_export(162, 1);
-+	}
-+
-+	if(!strcmp(expansionboard_name, "bbtoys-wifi"))
-+	{
-+		if (wl12xx_set_platform_data(&omap_beagle_wlan_data))
-+			pr_err("error setting wl12xx data\n");
-+		printk(KERN_INFO "Beagle expansionboard: registering wl12xx bt platform device\n");
-+		platform_device_register(&wl12xx_device);
-+		printk(KERN_INFO "Beagle expansionboard: registering wl12xx wifi platform device\n");
-+		platform_device_register(&omap_vwlan_device);
-+	}
-+
- 	usb_musb_init(NULL);
- 	usbhs_init(&usbhs_bdata);
- 	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
-@@ -558,6 +822,8 @@ static void __init omap3_beagle_init(void)
- 	beagle_opp_init();
- }
- 
-+early_param("buddy", expansionboard_setup);
-+
- MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
- 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
- 	.boot_params	= 0x80000100,
--- 
-1.6.6.1
-

recipes-kernel/linux/linux-3.0+3.1rc/beagle/0002-HACK-OMAP3-beagle-switch-to-GPTIMER1.patch

@@ -1,26 +0,0 @@
-From 6bdb8e890f8e5d11be3c4953d7d10f4a5f160cd4 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Thu, 21 Jul 2011 12:59:20 +0200
-Subject: [PATCH 2/3] HACK: OMAP3: beagle: switch to GPTIMER1
-
-Breaks with B3 and older due to clock noise
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- arch/arm/mach-omap2/board-omap3beagle.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
-index f26a9a8..a04f5a0 100644
---- a/arch/arm/mach-omap2/board-omap3beagle.c
-+++ b/arch/arm/mach-omap2/board-omap3beagle.c
-@@ -832,5 +832,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
- 	.init_early	= omap3_beagle_init_early,
- 	.init_irq	= omap3_beagle_init_irq,
- 	.init_machine	= omap3_beagle_init,
--	.timer		= &omap3_secure_timer,
-+	.timer		= &omap3_timer,
- MACHINE_END
--- 
-1.6.6.1
-

recipes-kernel/linux/linux-3.0+3.1rc/beagle/0003-OMAP3-beagle-HACK-add-in-1GHz-OPP.patch

@@ -1,31 +0,0 @@
-From 6667757c5f8a473b9cbbe5f6d64eee65a52aad54 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Wed, 25 May 2011 08:57:40 +0200
-Subject: [PATCH 3/3] OMAP3: beagle: HACK! add in 1GHz OPP
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- arch/arm/mach-omap2/board-omap3beagle.c |    2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
-index a04f5a0..5e1d9f9 100644
---- a/arch/arm/mach-omap2/board-omap3beagle.c
-+++ b/arch/arm/mach-omap2/board-omap3beagle.c
-@@ -701,11 +701,13 @@ static void __init beagle_opp_init(void)
- 		/* Enable MPU 1GHz and lower opps */
- 		dev = &mh->od->pdev.dev;
- 		r = opp_enable(dev, 800000000);
-+		r |= opp_enable(dev, 1000000000);
- 		/* TODO: MPU 1GHz needs SR and ABB */
- 
- 		/* Enable IVA 800MHz and lower opps */
- 		dev = &dh->od->pdev.dev;
- 		r |= opp_enable(dev, 660000000);
-+		r |= opp_enable(dev, 800000000);
- 		/* TODO: DSP 800MHz needs SR and ABB */
- 		if (r) {
- 			pr_err("%s: failed to enable higher opp %d\n",
--- 
-1.6.6.1
-

recipes-kernel/linux/linux-3.0+3.1rc/fixes/vout.patch

@@ -1,79 +0,0 @@
-Delivered-To: koen@dominion.thruhere.net
-Received: by 10.236.157.72 with SMTP id n48cs4581yhk;
-        Fri, 5 Aug 2011 00:10:45 -0700 (PDT)
-Received: by 10.147.146.12 with SMTP id y12mr1585882yan.12.1312528245335;
-        Fri, 05 Aug 2011 00:10:45 -0700 (PDT)
-Return-Path: <archit@ti.com>
-Received: from bear.ext.ti.com (bear.ext.ti.com [192.94.94.41])
-        by mx.google.com with ESMTPS id x20si3422127ani.205.2011.08.05.00.10.45
-        (version=TLSv1/SSLv3 cipher=OTHER);
-        Fri, 05 Aug 2011 00:10:45 -0700 (PDT)
-Received-SPF: pass (google.com: domain of archit@ti.com designates 192.94.94.41 as permitted sender) client-ip=192.94.94.41;
-Authentication-Results: mx.google.com; spf=pass (google.com: domain of archit@ti.com designates 192.94.94.41 as permitted sender) smtp.mail=archit@ti.com
-Received: from dlep33.itg.ti.com ([157.170.170.112])
-	by bear.ext.ti.com (8.13.7/8.13.7) with ESMTP id p757AiHb023389
-	(version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=NO);
-	Fri, 5 Aug 2011 02:10:44 -0500
-Received: from dlep26.itg.ti.com (smtp-le.itg.ti.com [157.170.170.27])
-	by dlep33.itg.ti.com (8.13.7/8.13.8) with ESMTP id p757AiWp004418;
-	Fri, 5 Aug 2011 02:10:44 -0500 (CDT)
-Received: from dlee73.ent.ti.com (localhost [127.0.0.1])
-	by dlep26.itg.ti.com (8.13.8/8.13.8) with ESMTP id p757AiBJ012377;
-	Fri, 5 Aug 2011 02:10:44 -0500 (CDT)
-Received: from dlelxv23.itg.ti.com (172.17.1.198) by DLEE73.ent.ti.com
- (157.170.170.88) with Microsoft SMTP Server id 8.3.106.1; Fri, 5 Aug 2011
- 02:10:44 -0500
-Received: from legion.dal.design.ti.com (legion.dal.design.ti.com
- [128.247.22.53])	by dlelxv23.itg.ti.com (8.13.8/8.13.8) with ESMTP id
- p757Ai9V018852;	Fri, 5 Aug 2011 02:10:44 -0500
-Received: from localhost (a0393947pc.apr.dhcp.ti.com [172.24.137.144])	by
- legion.dal.design.ti.com (8.11.7p1+Sun/8.11.7) with ESMTP id p757Aef10060;
-	Fri, 5 Aug 2011 02:10:41 -0500 (CDT)
-From: Archit Taneja <archit@ti.com>
-To: <hvaibhav@ti.com>, <linux-media@vger.kernel.org>
-CC: <koen@dominion.thruhere.net>, <tomi.valkeinen@ti.com>,
-        <linux-omap@vger.kernel.org>, Archit Taneja <archit@ti.com>
-Subject: [PATCH] [media] OMAP_VOUT: Fix build break caused by update_mode removal in DSS2
-Date: Fri, 5 Aug 2011 12:49:21 +0530
-Message-ID: <1312528761-18241-1-git-send-email-archit@ti.com>
-X-Mailer: git-send-email 1.7.1
-MIME-Version: 1.0
-Content-Type: text/plain
-
-The DSS2 driver does not support the configuration of the update_mode of a
-panel anymore. Remove the setting of update_mode done in omap_vout_probe().
-Ignore configuration of TE since omap_vout driver doesn't support manual update
-displays anyway.
-
-Signed-off-by: Archit Taneja <archit@ti.com>
----
- drivers/media/video/omap/omap_vout.c |   13 -------------
- 1 files changed, 0 insertions(+), 13 deletions(-)
-
-diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
-index b5ef362..b3a5ecd 100644
---- a/drivers/media/video/omap/omap_vout.c
-+++ b/drivers/media/video/omap/omap_vout.c
-@@ -2194,19 +2194,6 @@ static int __init omap_vout_probe(struct platform_device *pdev)
- 					"'%s' Display already enabled\n",
- 					def_display->name);
- 			}
--			/* set the update mode */
--			if (def_display->caps &
--					OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
--				if (dssdrv->enable_te)
--					dssdrv->enable_te(def_display, 0);
--				if (dssdrv->set_update_mode)
--					dssdrv->set_update_mode(def_display,
--							OMAP_DSS_UPDATE_MANUAL);
--			} else {
--				if (dssdrv->set_update_mode)
--					dssdrv->set_update_mode(def_display,
--							OMAP_DSS_UPDATE_AUTO);
--			}
- 		}
- 	}
- 
--- 
-1.7.1
-

recipes-kernel/linux/linux-3.0+3.1rc/madc/0001-Enabling-Hwmon-driver-for-twl4030-madc.patch

@@ -1,46 +0,0 @@
-From 428afa6e7a96419f6f17158a9ac38ab24d664997 Mon Sep 17 00:00:00 2001
-From: Keerthy <j-keerthy@ti.com>
-Date: Wed, 4 May 2011 01:14:50 +0530
-Subject: [PATCH 1/2] Enabling Hwmon driver for twl4030-madc
-
-Signed-off-by: Keerthy <j-keerthy@ti.com>
----
- drivers/mfd/twl-core.c |   15 +++++++++++++++
- 1 files changed, 15 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
-index a2eddc7..81fcf18 100644
---- a/drivers/mfd/twl-core.c
-+++ b/drivers/mfd/twl-core.c
-@@ -83,6 +83,13 @@
- #define twl_has_madc()	false
- #endif
- 
-+#if defined(CONFIG_SENSORS_TWL4030_MADC) ||\
-+	 defined(CONFIG_SENSORS_TWL4030_MADC_MODULE)
-+#define twl_has_madc_hwmon()  true
-+#else
-+#define twl_has_madc_hwmon()  false
-+#endif
-+
- #ifdef CONFIG_TWL4030_POWER
- #define twl_has_power()        true
- #else
-@@ -669,6 +676,14 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
- 			return PTR_ERR(child);
- 	}
- 
-+if (twl_has_madc_hwmon()) {
-+		child = add_child(2, "twl4030_madc_hwmon",
-+				NULL, 0,
-+				true, pdata->irq_base + MADC_INTR_OFFSET, 0);
-+		if (IS_ERR(child))
-+			return PTR_ERR(child);
-+	}
-+
- 	if (twl_has_rtc()) {
- 		/*
- 		 * REVISIT platform_data here currently might expose the
--- 
-1.6.6.1
-

recipes-kernel/linux/linux-3.0+3.1rc/madc/0002-mfd-twl-core-enable-madc-clock.patch

@@ -1,54 +0,0 @@
-From fbfdf09f148219d48ee35e830923ca75bbd0b91b Mon Sep 17 00:00:00 2001
-From: Steve Sakoman <steve@sakoman.com>
-Date: Sat, 23 Jan 2010 06:26:54 -0800
-Subject: [PATCH 2/2] mfd: twl-core: enable madc clock
-
-Now that the madc driver has been merged it is also necessary to enable the clock to the madc block
-
-Signed-off-by: Steve Sakoman <steve@sakoman.com>
----
- drivers/mfd/twl-core.c  |    8 ++++++++
- include/linux/i2c/twl.h |    1 +
- 2 files changed, 9 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c
-index 81fcf18..08aa64f 100644
---- a/drivers/mfd/twl-core.c
-+++ b/drivers/mfd/twl-core.c
-@@ -217,6 +217,11 @@
- 
- /* Few power values */
- #define R_CFG_BOOT			0x05
-+#define R_GPBR1				0x0C
-+
-+/* MADC clock values for R_GPBR1 */
-+#define MADC_HFCLK_EN			0x80
-+#define DEFAULT_MADC_CLK_EN		0x10
- 
- /* some fields in R_CFG_BOOT */
- #define HFCLK_FREQ_19p2_MHZ		(1 << 0)
-@@ -1151,6 +1156,9 @@ static void clocks_init(struct device *dev,
- 
- 	e |= unprotect_pm_master();
- 	/* effect->MADC+USB ck en */
-+	if (twl_has_madc())
-+		e |= twl_i2c_write_u8(TWL_MODULE_INTBR,
-+				MADC_HFCLK_EN | DEFAULT_MADC_CLK_EN, R_GPBR1);
- 	e |= twl_i2c_write_u8(TWL_MODULE_PM_MASTER, ctrl, R_CFG_BOOT);
- 	e |= protect_pm_master();
- 
-diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
-index 114c0f6..f060751 100644
---- a/include/linux/i2c/twl.h
-+++ b/include/linux/i2c/twl.h
-@@ -74,6 +74,7 @@
- 
- #define TWL_MODULE_USB		TWL4030_MODULE_USB
- #define TWL_MODULE_AUDIO_VOICE	TWL4030_MODULE_AUDIO_VOICE
-+#define TWL_MODULE_INTBR	TWL4030_MODULE_INTBR
- #define TWL_MODULE_PIH		TWL4030_MODULE_PIH
- #define TWL_MODULE_MADC		TWL4030_MODULE_MADC
- #define TWL_MODULE_MAIN_CHARGE	TWL4030_MODULE_MAIN_CHARGE
--- 
-1.6.6.1
-

recipes-kernel/linux/linux-3.0+3.1rc/patch.sh

@@ -1,27 +0,0 @@
-#!/bin/bash
-# (c) 2009 - 2011 Koen Kooi <koen@dominion.thruhere.net>
-# This script will take a set of directories with patches and make a git tree out of it
-# After all the patches are applied it will output a SRC_URI fragment you can copy/paste into a recipe
-
-TAG="mainline/master"
-EXTRATAG="-3.1"
-
-git fetch mainline
-git am --abort
-git reset --hard ${TAG}
-rm export -rf
-
-previous=${TAG}
-PATCHSET="beagle madc sgx"
-
-# apply patches
-for patchset in ${PATCHSET} ; do
-	git am $patchset/* && git tag "${patchset}${EXTRATAG}" -f
-done
-
-# export patches and output SRC_URI for them
-for patchset in ${PATCHSET} ; do
-	mkdir export/$patchset -p
-	( cd export/$patchset && git format-patch ${previous}..${patchset}${EXTRATAG} >& /dev/null && for i in *.patch ; do echo "            file://${patchset}/$i \\" ; done )
-	previous=${patchset}${EXTRATAG}
-done

recipes-kernel/linux/linux-3.0+3.1rc/sgx/0001-ARM-L2-Add-and-export-outer_clean_all.patch

@@ -1,67 +0,0 @@
-From 927d1d96b5c4d3439a301b73804ade67b8cdd81a Mon Sep 17 00:00:00 2001
-From: Vikram Pandita <vikram.pandita@ti.com>
-Date: Tue, 31 May 2011 09:24:58 +0100
-Subject: [PATCH] ARM: L2: Add and export outer_clean_all
-
-The Errata 588369 and 539766 demands that clean all operation be done
-as clean each way at a time
-
-This patch also raps the implementation under the CONFIG errata
-macro so that for non-errata version silicon it can be disabled
-
-Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
-Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
-Cc: Woodruff, Richard <r-woodruff2@ti.com>
----
- arch/arm/include/asm/outercache.h |    8 ++++++++
- arch/arm/mm/cache-l2x0.c          |    1 +
- 2 files changed, 9 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h
-index d838743..fa8cbd8 100644
---- a/arch/arm/include/asm/outercache.h
-+++ b/arch/arm/include/asm/outercache.h
-@@ -28,6 +28,7 @@ struct outer_cache_fns {
- 	void (*clean_range)(unsigned long, unsigned long);
- 	void (*flush_range)(unsigned long, unsigned long);
- 	void (*flush_all)(void);
-+	void (*clean_all)(void);
- 	void (*inv_all)(void);
- 	void (*disable)(void);
- #ifdef CONFIG_OUTER_CACHE_SYNC
-@@ -61,6 +62,11 @@ static inline void outer_flush_all(void)
- 	if (outer_cache.flush_all)
- 		outer_cache.flush_all();
- }
-+static inline void outer_clean_all(void)
-+{
-+	if (outer_cache.clean_all)
-+		outer_cache.clean_all();
-+}
- 
- static inline void outer_inv_all(void)
- {
-@@ -97,6 +103,8 @@ static inline void outer_sync(void)
- #else
- static inline void outer_sync(void)
- { }
-+static inline void outer_clean_all(void)
-+{ }
- #endif
- 
- #endif	/* __ASM_OUTERCACHE_H */
-diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
-index 44c0867..10b79d6 100644
---- a/arch/arm/mm/cache-l2x0.c
-+++ b/arch/arm/mm/cache-l2x0.c
-@@ -346,6 +346,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
- 	outer_cache.inv_all = l2x0_inv_all;
- 	outer_cache.disable = l2x0_disable;
- 	outer_cache.set_debug = l2x0_set_debug;
-+	outer_cache.clean_all = l2x0_clean_all;
- 
- 	printk(KERN_INFO "%s cache controller enabled\n", type);
- 	printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
--- 
-1.6.6.1
-

recipes-kernel/linux/linux-3.0/beagle/0001-OMAP3-beagle-add-support-for-beagleboard-xM-revision.patch

@@ -1,196 +0,0 @@
-From ba3e97075ad35eeaf35191c4e5c2b90de5d96209 Mon Sep 17 00:00:00 2001
-From: Fernandes, Joel A <joelagnel@ti.com>
-Date: Tue, 7 Jun 2011 15:54:45 -0500
-Subject: [PATCH 01/10] OMAP3: beagle: add support for beagleboard xM revision C
-
-OMAP3: beagle: add support for beagleboard xM revision C
-
-The USB enable GPIO has been in beagleboard xM revision C.
-The USER button has been moved since beagleboard xM.
-Also, board specific initialization has been moved to beagle_config struct
-and initialized in omap3_beagle_init_rev. Default values in struct are for xMC.
-
-Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- arch/arm/mach-omap2/board-omap3beagle.c |   78 ++++++++++++++++++++-----------
- 1 files changed, 51 insertions(+), 27 deletions(-)
-
-diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
-index 34f8411..32f5f89 100644
---- a/arch/arm/mach-omap2/board-omap3beagle.c
-+++ b/arch/arm/mach-omap2/board-omap3beagle.c
-@@ -60,7 +60,8 @@
-  *	AXBX	= GPIO173, GPIO172, GPIO171: 1 1 1
-  *	C1_3	= GPIO173, GPIO172, GPIO171: 1 1 0
-  *	C4	= GPIO173, GPIO172, GPIO171: 1 0 1
-- *	XM	= GPIO173, GPIO172, GPIO171: 0 0 0
-+ *	XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0
-+ *	XMC = GPIO173, GPIO172, GPIO171: 0 1 0
-  */
- enum {
- 	OMAP3BEAGLE_BOARD_UNKN = 0,
-@@ -68,14 +69,26 @@ enum {
- 	OMAP3BEAGLE_BOARD_C1_3,
- 	OMAP3BEAGLE_BOARD_C4,
- 	OMAP3BEAGLE_BOARD_XM,
-+	OMAP3BEAGLE_BOARD_XMC,
- };
- 
- static u8 omap3_beagle_version;
- 
--static u8 omap3_beagle_get_rev(void)
--{
--	return omap3_beagle_version;
--}
-+/*
-+ * Board-specific configuration
-+ * Defaults to BeagleBoard-xMC
-+ */
-+static struct {
-+	int mmc1_gpio_wp;
-+	int usb_pwr_level;
-+	int reset_gpio;
-+	int usr_button_gpio;
-+} beagle_config = {
-+	.mmc1_gpio_wp = -EINVAL,
-+	.usb_pwr_level = GPIOF_OUT_INIT_LOW,
-+	.reset_gpio = 129,
-+	.usr_button_gpio = 4,
-+};
- 
- static struct gpio omap3_beagle_rev_gpios[] __initdata = {
- 	{ 171, GPIOF_IN, "rev_id_0"    },
-@@ -110,18 +123,32 @@ static void __init omap3_beagle_init_rev(void)
- 	case 7:
- 		printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
- 		omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
-+		beagle_config.mmc1_gpio_wp = 29;
-+		beagle_config.reset_gpio = 170;
-+		beagle_config.usr_button_gpio = 7;
- 		break;
- 	case 6:
- 		printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
- 		omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
-+		beagle_config.mmc1_gpio_wp = 23;
-+		beagle_config.reset_gpio = 170;
-+		beagle_config.usr_button_gpio = 7;
- 		break;
- 	case 5:
- 		printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
- 		omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
-+		beagle_config.mmc1_gpio_wp = 23;
-+		beagle_config.reset_gpio = 170;
-+		beagle_config.usr_button_gpio = 7;
- 		break;
- 	case 0:
--		printk(KERN_INFO "OMAP3 Beagle Rev: xM\n");
-+		printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
- 		omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
-+		beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
-+		break;
-+	case 2:
-+		printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
-+		omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
- 		break;
- 	default:
- 		printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
-@@ -225,7 +252,7 @@ static struct omap2_hsmmc_info mmc[] = {
- 	{
- 		.mmc		= 1,
- 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
--		.gpio_wp	= 29,
-+		.gpio_wp	= -EINVAL,
- 	},
- 	{}	/* Terminator */
- };
-@@ -243,17 +270,11 @@ static struct gpio_led gpio_leds[];
- static int beagle_twl_gpio_setup(struct device *dev,
- 		unsigned gpio, unsigned ngpio)
- {
--	int r, usb_pwr_level;
--
--	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
--		mmc[0].gpio_wp = -EINVAL;
--	} else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) ||
--		(omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) {
--		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
--		mmc[0].gpio_wp = 23;
--	} else {
--		omap_mux_init_gpio(29, OMAP_PIN_INPUT);
--	}
-+	int r;
-+
-+	if (beagle_config.mmc1_gpio_wp != -EINVAL)
-+		omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
-+	mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
- 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
- 	mmc[0].gpio_cd = gpio + 0;
- 	omap2_hsmmc_init(mmc);
-@@ -263,9 +284,8 @@ static int beagle_twl_gpio_setup(struct device *dev,
- 	 * high / others active low)
- 	 * DVI reset GPIO is different between beagle revisions
- 	 */
--	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
--		usb_pwr_level = GPIOF_OUT_INIT_HIGH;
--		beagle_dvi_device.reset_gpio = 129;
-+	/* Valid for all -xM revisions */
-+	if (cpu_is_omap3630()) {
- 		/*
- 		 * gpio + 1 on Xm controls the TFP410's enable line (active low)
- 		 * gpio + 2 control varies depending on the board rev as below:
-@@ -283,8 +303,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
- 			pr_err("%s: unable to configure DVI_LDO_EN\n",
- 				__func__);
- 	} else {
--		usb_pwr_level = GPIOF_OUT_INIT_LOW;
--		beagle_dvi_device.reset_gpio = 170;
- 		/*
- 		 * REVISIT: need ehci-omap hooks for external VBUS
- 		 * power switch and overcurrent detect
-@@ -292,8 +310,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
- 		if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
- 			pr_err("%s: unable to configure EHCI_nOC\n", __func__);
- 	}
-+	beagle_dvi_device.reset_gpio = beagle_config.reset_gpio;
- 
--	gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR");
-+	gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
-+			"nEN_USB_PWR");
- 
- 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
- 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-@@ -404,7 +424,8 @@ static struct platform_device leds_gpio = {
- static struct gpio_keys_button gpio_buttons[] = {
- 	{
- 		.code			= BTN_EXTRA,
--		.gpio			= 7,
-+		/* Dynamically assigned depending on board */
-+		.gpio			= -EINVAL,
- 		.desc			= "user",
- 		.wakeup			= 1,
- 	},
-@@ -468,8 +489,8 @@ static void __init beagle_opp_init(void)
- 		return;
- 	}
- 
--	/* Custom OPP enabled for XM */
--	if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) {
-+	/* Custom OPP enabled for all xM versions */
-+	if (cpu_is_omap3630()) {
- 		struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
- 		struct omap_hwmod *dh = omap_hwmod_lookup("iva");
- 		struct device *dev;
-@@ -509,6 +530,9 @@ static void __init omap3_beagle_init(void)
- 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- 	omap3_beagle_init_rev();
- 	omap3_beagle_i2c_init();
-+
-+	gpio_buttons[0].gpio = beagle_config.usr_button_gpio;
-+
- 	platform_add_devices(omap3_beagle_devices,
- 			ARRAY_SIZE(omap3_beagle_devices));
- 	omap_display_init(&beagle_dss_data);
--- 
-1.7.2.5
-

recipes-kernel/linux/linux-3.0/beagle/0002-UNFINISHED-OMAP3-beagle-add-support-for-expansionboa.patch

@@ -1,340 +0,0 @@
-From 73366785ad8400aa22ffc0822ecc701349477de9 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Thu, 21 Jul 2011 14:29:42 +0200
-Subject: [PATCH 02/10] UNFINISHED: OMAP3: beagle: add support for expansionboards
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- arch/arm/mach-omap2/board-omap3beagle.c |  266 +++++++++++++++++++++++++++++++
- 1 files changed, 266 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
-index 32f5f89..f26a9a8 100644
---- a/arch/arm/mach-omap2/board-omap3beagle.c
-+++ b/arch/arm/mach-omap2/board-omap3beagle.c
-@@ -21,6 +21,7 @@
- #include <linux/io.h>
- #include <linux/leds.h>
- #include <linux/gpio.h>
-+#include <linux/irq.h>
- #include <linux/input.h>
- #include <linux/gpio_keys.h>
- #include <linux/opp.h>
-@@ -156,6 +157,167 @@ static void __init omap3_beagle_init_rev(void)
- 	}
- }
- 
-+char expansionboard_name[16];
-+
-+#if defined(CONFIG_WL12XX) || defined(CONFIG_WL12XX_MODULE)
-+#include <linux/regulator/fixed.h>
-+#include <linux/wl12xx.h>
-+
-+#define OMAP_BEAGLE_WLAN_EN_GPIO    (139)
-+#define OMAP_BEAGLE_BT_EN_GPIO      (138)
-+#define OMAP_BEAGLE_WLAN_IRQ_GPIO   (137)
-+#define OMAP_BEAGLE_FM_EN_BT_WU     (136)
-+
-+struct wl12xx_platform_data omap_beagle_wlan_data __initdata = {
-+	.irq = OMAP_GPIO_IRQ(OMAP_BEAGLE_WLAN_IRQ_GPIO),
-+	.board_ref_clock = 2, /* 38.4 MHz */
-+};
-+
-+static int gpios[] = {OMAP_BEAGLE_BT_EN_GPIO, OMAP_BEAGLE_FM_EN_BT_WU, -1};
-+static struct platform_device wl12xx_device = {
-+		.name		= "kim",
-+		.id			= -1,
-+		.dev.platform_data = &gpios,
-+};
-+
-+static struct omap2_hsmmc_info mmcbbt[] = {
-+ 	{
-+ 		.mmc		= 1,
-+ 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-+ 		.gpio_wp	= 29,
-+ 	},
-+	{
-+		.name		= "wl1271",
-+		.mmc		= 2,
-+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
-+		.gpio_wp	= -EINVAL,
-+		.gpio_cd	= -EINVAL,
-+		.ocr_mask	= MMC_VDD_165_195,
-+		.nonremovable	= true,
-+	},
-+ 	{}	/* Terminator */
-+ };
-+
-+static struct regulator_consumer_supply beagle_vmmc2_supply = 
-+	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1");
-+
-+static struct regulator_init_data beagle_vmmc2 = {
-+	.constraints = {
-+		.min_uV			= 1850000,
-+		.max_uV			= 1850000,
-+		.apply_uV		= true,
-+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-+					| REGULATOR_MODE_STANDBY,
-+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-+					| REGULATOR_CHANGE_STATUS,
-+	},
-+	.num_consumer_supplies = 1,
-+	.consumer_supplies = &beagle_vmmc2_supply,
-+};
-+
-+static struct fixed_voltage_config beagle_vwlan = {
-+	.supply_name = "vwl1271",
-+	.microvolts = 1800000,  /* 1.8V */
-+	.gpio = OMAP_BEAGLE_WLAN_EN_GPIO,
-+	.startup_delay = 70000, /* 70ms */
-+	.enable_high = 1,
-+	.enabled_at_boot = 0,
-+	.init_data = &beagle_vmmc2,
-+};
-+
-+static struct platform_device omap_vwlan_device = {
-+	.name           = "reg-fixed-voltage",
-+	.id             = 1,
-+	.dev = {
-+		.platform_data = &beagle_vwlan,
-+	},
-+};
-+#endif
-+
-+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
-+
-+#include <plat/mcspi.h>
-+#include <linux/spi/spi.h>
-+
-+#define OMAP3BEAGLE_GPIO_ENC28J60_IRQ 157
-+
-+static struct omap2_mcspi_device_config enc28j60_spi_chip_info = {
-+	.turbo_mode	= 0,
-+	.single_channel	= 1,	/* 0: slave, 1: master */
-+};
-+
-+static struct spi_board_info omap3beagle_zippy_spi_board_info[] __initdata = {
-+	{
-+		.modalias		= "enc28j60",
-+		.bus_num		= 4,
-+		.chip_select		= 0,
-+		.max_speed_hz		= 20000000,
-+		.controller_data	= &enc28j60_spi_chip_info,
-+	},
-+};
-+
-+static void __init omap3beagle_enc28j60_init(void)
-+{
-+	if ((gpio_request(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, "ENC28J60_IRQ") == 0) &&
-+	    (gpio_direction_input(OMAP3BEAGLE_GPIO_ENC28J60_IRQ) == 0)) {
-+		gpio_export(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, 0);
-+		omap3beagle_zippy_spi_board_info[0].irq	= OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_ENC28J60_IRQ);
-+		irq_set_irq_type(omap3beagle_zippy_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING);
-+	} else {
-+		printk(KERN_ERR "could not obtain gpio for ENC28J60_IRQ\n");
-+		return;
-+	}
-+
-+	spi_register_board_info(omap3beagle_zippy_spi_board_info,
-+			ARRAY_SIZE(omap3beagle_zippy_spi_board_info));
-+}
-+
-+#else
-+static inline void __init omap3beagle_enc28j60_init(void) { return; }
-+#endif
-+
-+#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
-+
-+#include <plat/mcspi.h>
-+#include <linux/spi/spi.h>
-+
-+#define OMAP3BEAGLE_GPIO_KS8851_IRQ 157
-+
-+static struct omap2_mcspi_device_config ks8851_spi_chip_info = {
-+	.turbo_mode	= 0,
-+	.single_channel	= 1,	/* 0: slave, 1: master */
-+};
-+
-+static struct spi_board_info omap3beagle_zippy2_spi_board_info[] __initdata = {
-+	{
-+		.modalias		= "ks8851",
-+		.bus_num		= 4,
-+		.chip_select		= 0,
-+		.max_speed_hz		= 36000000,
-+		.controller_data	= &ks8851_spi_chip_info,
-+	},
-+};
-+
-+static void __init omap3beagle_ks8851_init(void)
-+{
-+	if ((gpio_request(OMAP3BEAGLE_GPIO_KS8851_IRQ, "KS8851_IRQ") == 0) &&
-+	    (gpio_direction_input(OMAP3BEAGLE_GPIO_KS8851_IRQ) == 0)) {
-+		gpio_export(OMAP3BEAGLE_GPIO_KS8851_IRQ, 0);
-+		omap3beagle_zippy2_spi_board_info[0].irq	= OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_KS8851_IRQ);
-+		irq_set_irq_type(omap3beagle_zippy2_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING);
-+	} else {
-+		printk(KERN_ERR "could not obtain gpio for KS8851_IRQ\n");
-+		return;
-+	}
-+	
-+	spi_register_board_info(omap3beagle_zippy2_spi_board_info,
-+							ARRAY_SIZE(omap3beagle_zippy2_spi_board_info));
-+}
-+
-+#else
-+static inline void __init omap3beagle_ks8851_init(void) { return; }
-+#endif
-+
- static struct mtd_partition omap3beagle_nand_partitions[] = {
- 	/* All the partition sizes are listed in terms of NAND block size */
- 	{
-@@ -254,6 +416,12 @@ static struct omap2_hsmmc_info mmc[] = {
- 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
- 		.gpio_wp	= -EINVAL,
- 	},
-+	{
-+		.mmc		= 2,
-+		.caps       = MMC_CAP_4_BIT_DATA,
-+		.transceiver	= true,
-+		.ocr_mask	= 0x00100000,	/* 3.3V */
-+	},
- 	{}	/* Terminator */
- };
- 
-@@ -277,7 +445,15 @@ static int beagle_twl_gpio_setup(struct device *dev,
- 	mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
- 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
- 	mmc[0].gpio_cd = gpio + 0;
-+#if defined(CONFIG_WL12XX) || defined(CONFIG_WL12XX_MODULE)
-+	if(!strcmp(expansionboard_name, "bbtoys-wifi")) { 
-+		omap2_hsmmc_init(mmcbbt);
-+	} else {
-+		omap2_hsmmc_init(mmc);
-+	}
-+#else
- 	omap2_hsmmc_init(mmc);
-+#endif
- 
- 	/*
- 	 * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
-@@ -375,6 +551,19 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = {
-        },
- };
- 
-+#if defined(CONFIG_RTC_DRV_DS1307) || \
-+	defined(CONFIG_RTC_DRV_DS1307_MODULE)
-+
-+static struct i2c_board_info __initdata beagle_i2c2_zippy[] = {
-+	{
-+		I2C_BOARD_INFO("eeprom", 0x50),
-+		I2C_BOARD_INFO("ds1307", 0x68),
-+	},
-+};
-+#else
-+static struct i2c_board_info __initdata beagle_i2c2_zippy[] = {};
-+#endif
-+
- static int __init omap3_beagle_i2c_init(void)
- {
- 	omap3_pmic_get_config(&beagle_twldata,
-@@ -479,6 +668,15 @@ static struct omap_board_mux board_mux[] __initdata = {
- };
- #endif
- 
-+static int __init expansionboard_setup(char *str)
-+{
-+	if (!str)
-+		return -EINVAL;
-+	strncpy(expansionboard_name, str, 16);
-+	printk(KERN_INFO "Beagle expansionboard: %s\n", expansionboard_name);
-+	return 0;
-+}
-+
- static void __init beagle_opp_init(void)
- {
- 	int r = 0;
-@@ -542,6 +740,72 @@ static void __init omap3_beagle_init(void)
- 	/* REVISIT leave DVI powered down until it's needed ... */
- 	gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
- 
-+	if(!strcmp(expansionboard_name, "zippy")) 
-+	{
-+		printk(KERN_INFO "Beagle expansionboard: initializing enc28j60\n");
-+		omap3beagle_enc28j60_init();
-+		printk(KERN_INFO "Beagle expansionboard: assigning GPIO 141 and 162 to MMC1\n");
-+		mmc[1].gpio_wp = 141;
-+		mmc[1].gpio_cd = 162;
-+		printk(KERN_INFO "Beagle expansionboard: registering I2C2 for zippy board\n");
-+		omap_register_i2c_bus(2, 400,  beagle_i2c2_zippy,
-+							ARRAY_SIZE(beagle_i2c2_zippy));
-+
-+	}
-+	
-+	if(!strcmp(expansionboard_name, "zippy2")) 
-+	{
-+		printk(KERN_INFO "Beagle expansionboard: initializing ks_8851\n");
-+		omap3beagle_ks8851_init();
-+		printk(KERN_INFO "Beagle expansionboard: assigning GPIO 141 and 162 to MMC1\n");
-+		mmc[1].gpio_wp = 141;
-+		mmc[1].gpio_cd = 162;
-+		printk(KERN_INFO "Beagle expansionboard: registering I2C2 for zippy2 board\n");
-+		omap_register_i2c_bus(2, 400,  beagle_i2c2_zippy,
-+							ARRAY_SIZE(beagle_i2c2_zippy));		
-+	}
-+
-+	if(!strcmp(expansionboard_name, "trainer"))
-+	{
-+		printk(KERN_INFO "Beagle expansionboard: exporting GPIOs 130-141,162 to userspace\n");
-+		gpio_request(130, "sysfs");
-+		gpio_export(130, 1);
-+		gpio_request(131, "sysfs");
-+		gpio_export(131, 1);
-+		gpio_request(132, "sysfs");
-+		gpio_export(132, 1);
-+		gpio_request(133, "sysfs");
-+		gpio_export(133, 1);
-+		gpio_request(134, "sysfs");
-+		gpio_export(134, 1);
-+		gpio_request(135, "sysfs");
-+		gpio_export(135, 1);
-+		gpio_request(136, "sysfs");
-+		gpio_export(136, 1);
-+		gpio_request(137, "sysfs");
-+		gpio_export(137, 1);
-+		gpio_request(138, "sysfs");
-+		gpio_export(138, 1);
-+		gpio_request(139, "sysfs");
-+		gpio_export(139, 1);
-+		gpio_request(140, "sysfs");
-+		gpio_export(140, 1);
-+		gpio_request(141, "sysfs");
-+		gpio_export(141, 1);
-+		gpio_request(162, "sysfs");
-+		gpio_export(162, 1);
-+	}
-+
-+	if(!strcmp(expansionboard_name, "bbtoys-wifi"))
-+	{
-+		if (wl12xx_set_platform_data(&omap_beagle_wlan_data))
-+			pr_err("error setting wl12xx data\n");
-+		printk(KERN_INFO "Beagle expansionboard: registering wl12xx bt platform device\n");
-+		platform_device_register(&wl12xx_device);
-+		printk(KERN_INFO "Beagle expansionboard: registering wl12xx wifi platform device\n");
-+		platform_device_register(&omap_vwlan_device);
-+	}
-+
- 	usb_musb_init(NULL);
- 	usbhs_init(&usbhs_bdata);
- 	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
-@@ -558,6 +822,8 @@ static void __init omap3_beagle_init(void)
- 	beagle_opp_init();
- }
- 
-+early_param("buddy", expansionboard_setup);
-+
- MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
- 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
- 	.boot_params	= 0x80000100,
--- 
-1.7.2.5
-

recipes-kernel/linux/linux-3.0/beagle/0003-HACK-OMAP3-beagle-switch-to-GPTIMER1.patch

@@ -1,26 +0,0 @@
-From a7e1724833070f01b82381f40b084fd33e46836d Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Thu, 21 Jul 2011 12:59:20 +0200
-Subject: [PATCH 03/10] HACK: OMAP3: beagle: switch to GPTIMER1
-
-Breaks with B3 and older due to clock noise
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- arch/arm/mach-omap2/board-omap3beagle.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
-index f26a9a8..a04f5a0 100644
---- a/arch/arm/mach-omap2/board-omap3beagle.c
-+++ b/arch/arm/mach-omap2/board-omap3beagle.c
-@@ -832,5 +832,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
- 	.init_early	= omap3_beagle_init_early,
- 	.init_irq	= omap3_beagle_init_irq,
- 	.init_machine	= omap3_beagle_init,
--	.timer		= &omap3_secure_timer,
-+	.timer		= &omap3_timer,
- MACHINE_END
--- 
-1.7.2.5
-

recipes-kernel/linux/linux-3.0/beagle/0004-OMAP3-beagle-HACK-add-in-1GHz-OPP.patch

@@ -1,31 +0,0 @@
-From 6ebc5081aba3428762e4e055a154fdda9ebe442e Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Wed, 25 May 2011 08:57:40 +0200
-Subject: [PATCH 04/10] OMAP3: beagle: HACK! add in 1GHz OPP
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- arch/arm/mach-omap2/board-omap3beagle.c |    2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
-index a04f5a0..5e1d9f9 100644
---- a/arch/arm/mach-omap2/board-omap3beagle.c
-+++ b/arch/arm/mach-omap2/board-omap3beagle.c
-@@ -701,11 +701,13 @@ static void __init beagle_opp_init(void)
- 		/* Enable MPU 1GHz and lower opps */
- 		dev = &mh->od->pdev.dev;
- 		r = opp_enable(dev, 800000000);
-+		r |= opp_enable(dev, 1000000000);
- 		/* TODO: MPU 1GHz needs SR and ABB */
- 
- 		/* Enable IVA 800MHz and lower opps */
- 		dev = &dh->od->pdev.dev;
- 		r |= opp_enable(dev, 660000000);
-+		r |= opp_enable(dev, 800000000);
- 		/* TODO: DSP 800MHz needs SR and ABB */
- 		if (r) {
- 			pr_err("%s: failed to enable higher opp %d\n",
--- 
-1.7.2.5
-

recipes-kernel/linux/linux-3.0/beagle/0005-omap3-Add-basic-support-for-720MHz-part.patch

@@ -1,202 +0,0 @@
-From f0a23fe6d3c8fc9bbb60a962114b64b923ca4515 Mon Sep 17 00:00:00 2001
-From: Sanjeev Premi <premi@ti.com>
-Date: Tue, 18 Jan 2011 13:19:55 +0530
-Subject: [PATCH 05/10] omap3: Add basic support for 720MHz part
-
-This patch adds support for new speed enhanced parts with ARM
-and IVA running at 720MHz and 520MHz respectively. These parts
-can be probed at run-time by reading PRODID.SKUID[3:0] at
-0x4830A20C [1].
-
-This patch specifically does following:
- * Detect devices capable of 720MHz.
- * Add new OPP
- * Ensure that OPP is conditionally enabled.
- * Check for presence of IVA before attempting to enable
-   the corresponding OPP.
-
-  [1] http://focus.ti.com/lit/ug/spruff1d/spruff1d.pdf
-
-Signed-off-by: Sanjeev Premi <premi@ti.com>
----
- arch/arm/mach-omap2/control.h         |    7 ++++
- arch/arm/mach-omap2/id.c              |   10 +++++
- arch/arm/mach-omap2/opp3xxx_data.c    |   63 ++++++++++++++++++++++++++++++++-
- arch/arm/plat-omap/include/plat/cpu.h |    2 +
- 4 files changed, 81 insertions(+), 1 deletions(-)
-
-diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
-index a016c8b..69d0b9c 100644
---- a/arch/arm/mach-omap2/control.h
-+++ b/arch/arm/mach-omap2/control.h
-@@ -371,6 +371,13 @@
- #define		FEAT_NEON		0
- #define		FEAT_NEON_NONE		1
- 
-+/*
-+ * Product ID register
-+ */
-+#define OMAP3_PRODID			0x020C
-+
-+#define OMAP3_SKUID_MASK		0x0f
-+#define		OMAP3_SKUID_720MHZ	0x08
- 
- #ifndef __ASSEMBLY__
- #ifdef CONFIG_ARCH_OMAP2PLUS
-diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
-index 2537090..b6ed78a 100644
---- a/arch/arm/mach-omap2/id.c
-+++ b/arch/arm/mach-omap2/id.c
-@@ -210,6 +210,15 @@ static void __init omap3_check_features(void)
- 	 * TODO: Get additional info (where applicable)
- 	 *       e.g. Size of L2 cache.
- 	 */
-+
-+	/*
-+	 * Does it support 720MHz?
-+	 */
-+	status = (OMAP3_SKUID_MASK & read_tap_reg(OMAP3_PRODID));
-+
-+	if (status & OMAP3_SKUID_720MHZ) {
-+		omap3_features |= OMAP3_HAS_720MHZ;
-+	}
- }
- 
- static void __init ti816x_check_features(void)
-@@ -490,6 +499,7 @@ static void __init omap3_cpuinfo(void)
- 	OMAP3_SHOW_FEATURE(neon);
- 	OMAP3_SHOW_FEATURE(isp);
- 	OMAP3_SHOW_FEATURE(192mhz_clk);
-+	OMAP3_SHOW_FEATURE(720mhz);
- 
- 	printk(")\n");
- }
-diff --git a/arch/arm/mach-omap2/opp3xxx_data.c b/arch/arm/mach-omap2/opp3xxx_data.c
-index d95f3f9..44fbc84 100644
---- a/arch/arm/mach-omap2/opp3xxx_data.c
-+++ b/arch/arm/mach-omap2/opp3xxx_data.c
-@@ -18,8 +18,10 @@
-  * GNU General Public License for more details.
-  */
- #include <linux/module.h>
-+#include <linux/opp.h>
- 
- #include <plat/cpu.h>
-+#include <plat/omap_device.h>
- 
- #include "control.h"
- #include "omap_opp_data.h"
-@@ -98,6 +100,8 @@ static struct omap_opp_def __initdata omap34xx_opp_def_list[] = {
- 	OPP_INITIALIZER("mpu", true, 550000000, OMAP3430_VDD_MPU_OPP4_UV),
- 	/* MPU OPP5 */
- 	OPP_INITIALIZER("mpu", true, 600000000, OMAP3430_VDD_MPU_OPP5_UV),
-+	/* MPU OPP6 */
-+	OPP_INITIALIZER("mpu", false, 720000000, 1350000),
- 
- 	/*
- 	 * L3 OPP1 - 41.5 MHz is disabled because: The voltage for that OPP is
-@@ -123,6 +127,8 @@ static struct omap_opp_def __initdata omap34xx_opp_def_list[] = {
- 	OPP_INITIALIZER("iva", true, 400000000, OMAP3430_VDD_MPU_OPP4_UV),
- 	/* DSP OPP5 */
- 	OPP_INITIALIZER("iva", true, 430000000, OMAP3430_VDD_MPU_OPP5_UV),
-+	/* DSP OPP6 */
-+	OPP_INITIALIZER("iva", false, 520000000, 1350000),
- };
- 
- static struct omap_opp_def __initdata omap36xx_opp_def_list[] = {
-@@ -150,6 +156,57 @@ static struct omap_opp_def __initdata omap36xx_opp_def_list[] = {
- 	OPP_INITIALIZER("iva", false, 800000000, OMAP3630_VDD_MPU_OPP1G_UV),
- };
- 
-+
-+/**
-+ * omap3_opp_enable_720Mhz() - Enable the OPP corresponding to 720MHz
-+ *
-+ * This function would be executed only if the silicon is capable of
-+ * running at the 720MHz.
-+ */
-+static int __init omap3_opp_enable_720Mhz(void)
-+{
-+	int r = -ENODEV;
-+	struct omap_hwmod *oh_mpu = omap_hwmod_lookup("mpu");
-+	struct omap_hwmod *oh_iva;
-+	struct platform_device *pdev;
-+
-+	if (!oh_mpu || !oh_mpu->od) {
-+		goto err;
-+	} else {
-+		pdev = &oh_mpu->od->pdev;
-+
-+		r = opp_enable(&pdev->dev, 720000000);
-+		if (r < 0) {
-+			dev_err(&pdev->dev,
-+				"opp_enable() failed for mpu@720MHz");
-+			goto err;
-+		}
-+	}
-+
-+	if (omap3_has_iva()) {
-+		oh_iva = omap_hwmod_lookup("iva");
-+
-+		if (!oh_iva || !oh_iva->od) {
-+			r = -ENODEV;
-+			goto err;
-+		} else {
-+			pdev = &oh_iva->od->pdev;
-+
-+			r = opp_enable(&pdev->dev, 520000000);
-+			if (r < 0) {
-+				dev_err(&pdev->dev,
-+					"opp_enable() failed for iva@520MHz");
-+				goto err;
-+			}
-+		}
-+	}
-+
-+	dev_info(&pdev->dev, "Enabled OPP corresponding to 720MHz\n");
-+
-+err:
-+	return r;
-+}
-+
- /**
-  * omap3_opp_init() - initialize omap3 opp table
-  */
-@@ -163,10 +220,14 @@ int __init omap3_opp_init(void)
- 	if (cpu_is_omap3630())
- 		r = omap_init_opp_table(omap36xx_opp_def_list,
- 			ARRAY_SIZE(omap36xx_opp_def_list));
--	else
-+	else {
- 		r = omap_init_opp_table(omap34xx_opp_def_list,
- 			ARRAY_SIZE(omap34xx_opp_def_list));
- 
-+		if (omap3_has_720mhz())
-+			r = omap3_opp_enable_720Mhz();
-+	}
-+
- 	return r;
- }
- device_initcall(omap3_opp_init);
-diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
-index 8198bb6..5204c1e 100644
---- a/arch/arm/plat-omap/include/plat/cpu.h
-+++ b/arch/arm/plat-omap/include/plat/cpu.h
-@@ -478,6 +478,7 @@ extern u32 omap3_features;
- #define OMAP3_HAS_192MHZ_CLK		BIT(5)
- #define OMAP3_HAS_IO_WAKEUP		BIT(6)
- #define OMAP3_HAS_SDRC			BIT(7)
-+#define OMAP3_HAS_720MHZ		BIT(8)
- 
- #define OMAP3_HAS_FEATURE(feat,flag)			\
- static inline unsigned int omap3_has_ ##feat(void)	\
-@@ -493,5 +494,6 @@ OMAP3_HAS_FEATURE(isp, ISP)
- OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK)
- OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP)
- OMAP3_HAS_FEATURE(sdrc, SDRC)
-+OMAP3_HAS_FEATURE(720mhz, 720MHZ)
- 
- #endif
--- 
-1.7.2.5
-

recipes-kernel/linux/linux-3.0/beagle/0006-ARM-OMAP2-beagleboard-make-wilink-init-look-more-lik.patch

@@ -1,32 +0,0 @@
-From d9242a243b61059cacde8ce1241b84fc787c57d1 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Thu, 20 Oct 2011 11:14:08 +0200
-Subject: [PATCH 06/10] ARM: OMAP2+: beagleboard: make wilink init look more like pandaboard
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- arch/arm/mach-omap2/board-omap3beagle.c |    8 +-------
- 1 files changed, 1 insertions(+), 7 deletions(-)
-
-diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
-index 5e1d9f9..13fffb0 100644
---- a/arch/arm/mach-omap2/board-omap3beagle.c
-+++ b/arch/arm/mach-omap2/board-omap3beagle.c
-@@ -203,13 +203,7 @@ static struct regulator_consumer_supply beagle_vmmc2_supply =
- 
- static struct regulator_init_data beagle_vmmc2 = {
- 	.constraints = {
--		.min_uV			= 1850000,
--		.max_uV			= 1850000,
--		.apply_uV		= true,
--		.valid_modes_mask	= REGULATOR_MODE_NORMAL
--					| REGULATOR_MODE_STANDBY,
--		.valid_ops_mask		= REGULATOR_CHANGE_MODE
--					| REGULATOR_CHANGE_STATUS,
-+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
- 	},
- 	.num_consumer_supplies = 1,
- 	.consumer_supplies = &beagle_vmmc2_supply,
--- 
-1.7.2.5
-

recipes-kernel/linux/linux-3.0/beagle/0007-omap_hsmmc-Set-dto-to-max-value-of-14-to-avoid-SD-Ca.patch

@@ -1,33 +0,0 @@
-From 47be8c9046c22715ce646091dd9e98fa87fc86e1 Mon Sep 17 00:00:00 2001
-From: Steve Sakoman <steve@sakoman.com>
-Date: Mon, 18 Jul 2011 23:13:41 -0500
-Subject: [PATCH 07/10] omap_hsmmc: Set dto to max value of 14 to avoid SD Card timeouts
-
-This fixes MMC errors due to timeouts on certain SD Cards following suggestions
-to set dto to 14 by Jason Kridner and Steven Kipisz
-
-Details of the issue:
-http://talk.maemo.org/showthread.php?p=1000707#post1000707
-
-This fix was originally proposed by Sukumar Ghoral of TI.
----
- drivers/mmc/host/omap_hsmmc.c |    3 +++
- 1 files changed, 3 insertions(+), 0 deletions(-)
-
-diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
-index dedf3da..a8a60d4 100644
---- a/drivers/mmc/host/omap_hsmmc.c
-+++ b/drivers/mmc/host/omap_hsmmc.c
-@@ -1441,6 +1441,9 @@ static void set_data_timeout(struct omap_hsmmc_host *host,
- 			dto = 14;
- 	}
- 
-+	/* Set dto to max value of 14 to avoid SD Card timeouts */
-+	dto = 14;
-+
- 	reg &= ~DTO_MASK;
- 	reg |= dto << DTO_SHIFT;
- 	OMAP_HSMMC_WRITE(host->base, SYSCTL, reg);
--- 
-1.7.2.5
-

recipes-kernel/linux/linux-3.0/beagle/0008-OMAP2-add-cpu-id-register-to-MAC-address-helper.patch

@@ -1,89 +0,0 @@
-From 2a9282daf94e8b9a1c8dc6fdf5b97461eb15348d Mon Sep 17 00:00:00 2001
-From: Andy Green <andy@warmcat.com>
-Date: Thu, 24 Mar 2011 21:27:29 +0000
-Subject: [PATCH 08/10] OMAP2+: add cpu id register to MAC address helper
-
-Introduce a generic helper function that can set a MAC address using
-data from the OMAP unique CPU ID register.
-
-For comparison purposes this produces a MAC address of
-
-  2e:40:70:f0:12:06
-
-for the ethernet device on my Panda.
-
-Note that this patch requires the fix patch for CPU ID register
-indexes previously posted to linux-omap, otherwise the CPU ID is
-misread on Panda by the existing function to do it.  This patch
-is already on linux-omap.
-
-"OMAP2+:Common CPU DIE ID reading code reads wrong registers for OMAP4430"
-http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=b235e007831dbf57710e59cd4a120e2f374eecb9
-
-Signed-off-by: Andy Green <andy.green@linaro.org>
----
- arch/arm/mach-omap2/id.c              |   39 +++++++++++++++++++++++++++++++++
- arch/arm/mach-omap2/include/mach/id.h |    1 +
- 2 files changed, 40 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
-index b6ed78a..de993f1 100644
---- a/arch/arm/mach-omap2/id.c
-+++ b/arch/arm/mach-omap2/id.c
-@@ -567,3 +567,42 @@ void __init omap2_set_globals_tap(struct omap_globals *omap2_globals)
- 	else
- 		tap_prod_id = 0x0208;
- }
-+
-+/*
-+ * this uses the unique per-cpu info from the cpu fuses set at factory to
-+ * generate a 6-byte MAC address.  Two bits in the generated code are used
-+ * to elaborate the generated address into four, so it can be used on multiple
-+ * network interfaces.
-+ */
-+
-+void omap2_die_id_to_ethernet_mac(u8 *mac, int subtype)
-+{
-+	struct omap_die_id odi;
-+	u32 tap = read_tap_reg(OMAP_TAP_IDCODE);
-+
-+	omap_get_die_id(&odi);
-+
-+	mac[0] = odi.id_2;
-+	mac[1] = odi.id_2 >> 8;
-+	mac[2] = odi.id_1;
-+	mac[3] = odi.id_1 >> 8;
-+	mac[4] = odi.id_1 >> 16;
-+	mac[5] = odi.id_1 >> 24;
-+
-+	/* XOR other chip-specific data with ID */
-+
-+	tap ^= odi.id_3;
-+
-+	mac[0] ^= tap;
-+	mac[1] ^= tap >> 8;
-+	mac[2] ^= tap >> 16;
-+	mac[3] ^= tap >> 24;
-+
-+	/* allow four MACs from this same basic data */
-+
-+	mac[1] = (mac[1] & ~0xc0) | ((subtype & 3) << 6);
-+
-+	/* mark it as not multicast and outside official 80211 MAC namespace */
-+
-+	mac[0] = (mac[0] & ~1) | 2;
-+}
-diff --git a/arch/arm/mach-omap2/include/mach/id.h b/arch/arm/mach-omap2/include/mach/id.h
-index 02ed3aa..373313a 100644
---- a/arch/arm/mach-omap2/include/mach/id.h
-+++ b/arch/arm/mach-omap2/include/mach/id.h
-@@ -18,5 +18,6 @@ struct omap_die_id {
- };
- 
- void omap_get_die_id(struct omap_die_id *odi);
-+void omap2_die_id_to_ethernet_mac(u8 *mac, int subtype);
- 
- #endif
--- 
-1.7.2.5
-

recipes-kernel/linux/linux-3.0/beagle/0009-HACK-OMAP2-BeagleBoard-Fix-up-random-or-missing-MAC-.patch

@@ -1,156 +0,0 @@
-From d0212d089b62cd7ebcd53104717180482e35ec1a Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jdk@ti.com>
-Date: Thu, 15 Sep 2011 18:23:02 -0400
-Subject: [PATCH 09/10] HACK: OMAP2+: BeagleBoard: Fix up random or missing MAC addresses for eth0 and wlan0
-
-This was borrowed from the Panda implementation at http://patches.linaro.org/777/
-
-This patch registers a network device notifier callback to set the mac
-addresses for the onboard network assets of the BeagleBoard correctly, despite the
-drivers involved have used a random or all-zeros MAC address.
-
-The technique was suggested by Alan Cox on lkml.
-
-It works by device path so it corrects the MAC addresses even if the
-drivers are in modules loaded in an order that changes their interface
-name from usual (eg, the onboard module might be "wlan1" if there is a
-USB wireless stick plugged in and its module is inserted first.)
-
-Cc: Andy Green <andy@warmcat.com>
----
- arch/arm/mach-omap2/board-omap3beagle.c |   90 +++++++++++++++++++++++++++++++
- 1 files changed, 90 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
-index 13fffb0..5ffe185 100644
---- a/arch/arm/mach-omap2/board-omap3beagle.c
-+++ b/arch/arm/mach-omap2/board-omap3beagle.c
-@@ -33,6 +33,8 @@
- 
- #include <linux/regulator/machine.h>
- #include <linux/i2c/twl.h>
-+#include <linux/netdevice.h>
-+#include <linux/if_ether.h>
- 
- #include <mach/hardware.h>
- #include <asm/mach-types.h>
-@@ -42,6 +44,7 @@
- 
- #include <plat/board.h>
- #include <plat/common.h>
-+#include <mach/id.h>
- #include <video/omapdss.h>
- #include <video/omap-panel-generic-dpi.h>
- #include <plat/gpmc.h>
-@@ -91,6 +94,90 @@ static struct {
- 	.usr_button_gpio = 4,
- };
- 
-+/*
-+ * This device path represents the onboard USB <-> Ethernet bridge
-+ * on the BeagleBoard-xM which needs a random or all-zeros
-+ * mac address replaced with a per-cpu stable generated one
-+ */
-+
-+static const char * const xm_fixup_mac_device_paths[] = {
-+	"usb1/1-2/1-2.1/1-2.1:1.0",
-+};
-+
-+static int beagle_device_path_need_mac(struct device *dev)
-+{
-+	const char **try = (const char **) xm_fixup_mac_device_paths;
-+	const char *path;
-+	int count = ARRAY_SIZE(xm_fixup_mac_device_paths);
-+	const char *p;
-+	int len;
-+	struct device *devn;
-+
-+	while (count--) {
-+
-+		p = *try + strlen(*try);
-+		devn = dev;
-+
-+		while (devn) {
-+
-+			path = dev_name(devn);
-+			len = strlen(path);
-+
-+			if ((p - *try) < len) {
-+				devn = NULL;
-+				continue;
-+			}
-+
-+			p -= len;
-+
-+			if (strncmp(path, p, len)) {
-+				devn = NULL;
-+				continue;
-+			}
-+
-+			devn = devn->parent;
-+			if (p == *try)
-+				return count;
-+
-+			if (devn != NULL && (p - *try) < 2)
-+				devn = NULL;
-+
-+			p--;
-+			if (devn != NULL && *p != '/')
-+				devn = NULL;
-+		}
-+
-+		try++;
-+	}
-+
-+	return -ENOENT;
-+}
-+
-+static int omap_beagle_netdev_event(struct notifier_block *this,
-+						 unsigned long event, void *ptr)
-+{
-+	struct net_device *dev = ptr;
-+	struct sockaddr sa;
-+	int n;
-+
-+	if (event != NETDEV_REGISTER)
-+		return NOTIFY_DONE;
-+
-+	n = beagle_device_path_need_mac(dev->dev.parent);
-+	if (n >= 0) {
-+		sa.sa_family = dev->type;
-+		omap2_die_id_to_ethernet_mac(sa.sa_data, n);
-+		dev->netdev_ops->ndo_set_mac_address(dev, &sa);
-+	}
-+
-+	return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block omap_beagle_netdev_notifier = {
-+	.notifier_call = omap_beagle_netdev_event,
-+	.priority = 1,
-+};
-+
- static struct gpio omap3_beagle_rev_gpios[] __initdata = {
- 	{ 171, GPIOF_IN, "rev_id_0"    },
- 	{ 172, GPIOF_IN, "rev_id_1" },
-@@ -146,14 +233,17 @@ static void __init omap3_beagle_init_rev(void)
- 		printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n");
- 		omap3_beagle_version = OMAP3BEAGLE_BOARD_XM;
- 		beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH;
-+		register_netdevice_notifier(&omap_beagle_netdev_notifier);
- 		break;
- 	case 2:
- 		printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n");
- 		omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC;
-+		register_netdevice_notifier(&omap_beagle_netdev_notifier);
- 		break;
- 	default:
- 		printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev);
- 		omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN;
-+		register_netdevice_notifier(&omap_beagle_netdev_notifier);
- 	}
- }
- 
--- 
-1.7.2.5
-

recipes-kernel/linux/linux-3.0/beagle/0010-ARM-OMAP2-beagleboard-fix-mmc-write-protect-pin-when.patch

@@ -1,26 +0,0 @@
-From 713c5b4ce910dacdd75e9616b0f989d643008536 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Wed, 19 Oct 2011 12:44:14 +0200
-Subject: [PATCH 10/10] ARM: OMAP2+: beagleboard: fix mmc write protect pin when using the wilink expansion board
-
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- arch/arm/mach-omap2/board-omap3beagle.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
-index 5ffe185..0124060 100644
---- a/arch/arm/mach-omap2/board-omap3beagle.c
-+++ b/arch/arm/mach-omap2/board-omap3beagle.c
-@@ -274,7 +274,7 @@ static struct omap2_hsmmc_info mmcbbt[] = {
-  	{
-  		.mmc		= 1,
-  		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
-- 		.gpio_wp	= 29,
-+ 		.gpio_wp	= -EINVAL,
-  	},
- 	{
- 		.name		= "wl1271",
--- 
-1.7.2.5
-