mirror of
https://git.yoctoproject.org/meta-ti
synced 2026-07-17 06:48:07 +00:00
Koen Kooi
4e18d70247
This patchset is managed in https://github.com/beagleboard/kernel/tree/beagleboard-3.2 by Robert Nelson and myself. Tested on beagleboard-xM/Angstrom Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Denys Dmytriyenko <denys@ti.com>
83 lines
2.7 KiB
Diff
83 lines
2.7 KiB
Diff
From 7548790462d7cea9d92688b488026569187b1044 Mon Sep 17 00:00:00 2001
|
|
From: Robert Nelson <robertcnelson@gmail.com>
|
|
Date: Mon, 10 Oct 2011 11:16:12 -0500
|
|
Subject: [PATCH 03/13] expansion: add zippy
|
|
|
|
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
|
|
---
|
|
arch/arm/mach-omap2/board-omap3beagle.c | 51 +++++++++++++++++++++++++++++++
|
|
1 files changed, 51 insertions(+), 0 deletions(-)
|
|
|
|
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
|
|
index 9f5706b..6ffafd6 100644
|
|
--- a/arch/arm/mach-omap2/board-omap3beagle.c
|
|
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
|
|
@@ -159,6 +159,48 @@ static void __init omap3_beagle_init_rev(void)
|
|
|
|
char expansionboard_name[16];
|
|
|
|
+#if defined(CONFIG_ENC28J60) || defined(CONFIG_ENC28J60_MODULE)
|
|
+
|
|
+#include <plat/mcspi.h>
|
|
+#include <linux/spi/spi.h>
|
|
+
|
|
+#define OMAP3BEAGLE_GPIO_ENC28J60_IRQ 157
|
|
+
|
|
+static struct omap2_mcspi_device_config enc28j60_spi_chip_info = {
|
|
+ .turbo_mode = 0,
|
|
+ .single_channel = 1, /* 0: slave, 1: master */
|
|
+};
|
|
+
|
|
+static struct spi_board_info omap3beagle_zippy_spi_board_info[] __initdata = {
|
|
+ {
|
|
+ .modalias = "enc28j60",
|
|
+ .bus_num = 4,
|
|
+ .chip_select = 0,
|
|
+ .max_speed_hz = 20000000,
|
|
+ .controller_data = &enc28j60_spi_chip_info,
|
|
+ },
|
|
+};
|
|
+
|
|
+static void __init omap3beagle_enc28j60_init(void)
|
|
+{
|
|
+ if ((gpio_request(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, "ENC28J60_IRQ") == 0) &&
|
|
+ (gpio_direction_input(OMAP3BEAGLE_GPIO_ENC28J60_IRQ) == 0)) {
|
|
+ gpio_export(OMAP3BEAGLE_GPIO_ENC28J60_IRQ, 0);
|
|
+ omap3beagle_zippy_spi_board_info[0].irq = OMAP_GPIO_IRQ(OMAP3BEAGLE_GPIO_ENC28J60_IRQ);
|
|
+ irq_set_irq_type(omap3beagle_zippy_spi_board_info[0].irq, IRQ_TYPE_EDGE_FALLING);
|
|
+ } else {
|
|
+ printk(KERN_ERR "could not obtain gpio for ENC28J60_IRQ\n");
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ spi_register_board_info(omap3beagle_zippy_spi_board_info,
|
|
+ ARRAY_SIZE(omap3beagle_zippy_spi_board_info));
|
|
+}
|
|
+
|
|
+#else
|
|
+static inline void __init omap3beagle_enc28j60_init(void) { return; }
|
|
+#endif
|
|
+
|
|
static struct mtd_partition omap3beagle_nand_partitions[] = {
|
|
/* All the partition sizes are listed in terms of NAND block size */
|
|
{
|
|
@@ -567,6 +609,15 @@ static void __init omap3_beagle_init(void)
|
|
/* REVISIT leave DVI powered down until it's needed ... */
|
|
gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
|
|
|
|
+ if(!strcmp(expansionboard_name, "zippy"))
|
|
+ {
|
|
+ printk(KERN_INFO "Beagle expansionboard: initializing enc28j60\n");
|
|
+ omap3beagle_enc28j60_init();
|
|
+ printk(KERN_INFO "Beagle expansionboard: assigning GPIO 141 and 162 to MMC1\n");
|
|
+ mmc[1].gpio_wp = 141;
|
|
+ mmc[1].gpio_cd = 162;
|
|
+ }
|
|
+
|
|
usb_musb_init(NULL);
|
|
usbhs_init(&usbhs_bdata);
|
|
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
|
|
--
|
|
1.7.7.4
|
|
|