Added the fact that this variable is really optional. If you
don't use it then you are setting up a package feed URI that
will include all supported arcchitectures for the package.
Using it means you are setting up specific URIs for specific
architectures.
Added a "Tip" note box to show how you can use the variable
to whitelist architectures.
(From yocto-docs rev: 009f3551aa61aaf6459fd24105a2e06511b59da3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I created a two-bullet "Caution" note to highlight the stuff a
user needs to be aware of that can cause problems.
(From yocto-docs rev: 553bc13e5fd350adb15400afe170e587965929db)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I took out the sections at the end of the manual that talked
about the yocto-kernel tool. This tool is no longer maintained
and there is no equivalent tool. I also fixed the yocto-bsp
tool to be the bitbake-layers tool. This involved some
consolidation of sections.
I fixed some links in the kernel-dev and toaster-manual.
(From yocto-docs rev: 20cda99b301b6327d816c4a4cfb3511ad25c987c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated this section with minor edits.
(From yocto-docs rev: 1bc1dcda5fbab4a66737653164222f4fc5a7289c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section had several out-of-date items. They are all up
to date now.
(From yocto-docs rev: 247f3eceeccc645a1b556aea433d4cf66399e962)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made changes to sync the raspberrypi BSP example to what is
really in the source directories. It was pretty out of date.
Made some minor edits to the sections describing the framework
of the BSP.
(From yocto-docs rev: b222d0988cb365cb1943ee1857e5cfd6b9fe173a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some edits to make the section more up-to-date. Dumped
minnow as a BSP example for raspberrypi.
(From yocto-docs rev: a40515bad28d07d736e1ddd1832c19b074749d53)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more relevant information around the discussion of BSP
layers.
(From yocto-docs rev: 8ca439b0bbfdcf390edb723fd12e8a00d90024e3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that creates a layer using bitbake-layers had old
output. Updated it.
(From yocto-docs rev: c58d738a59f113f8fffe0fc40b22e06b9d96cb6f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reference to tools to help upgrade now exists with the
creation of the section in the dev-manual that talks about how to
upgrade recipes. I converted the bullet item here in the QS to
point to the actual section.
(From yocto-docs rev: b3d8895fefb99799a7c06abff5cc1604530ee36a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did some rewriting to add some references to other sections
in the manual set. Did some other minor clean up.
(From yocto-docs rev: 7e7be31e96a0e73e230b8596b2431716f254e027)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the devtool add -h output.
Updated the devtool --help output.
Fixed wording for the "attic" file associated with the figure
of the workspace area.
(From yocto-docs rev: bc53d9a1236ba2545c112256e886729b08b507de)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided a bit of rationale on why and when you use this command.
Put in several links to help the reader get to related areas where
command use is explained.
(From yocto-docs rev: 7b30f29bfa15dd15f1388bb856e2047be55e7fb9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section covers AUH, devtool and manual. Still need to add
manual.
(From yocto-docs rev: 56f04b1fcc8673e20df6d8f5c65120b03cad31e7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to update the umbrella YP figure and the Poky figure. The
figures changed on the website so this gets them back in sync.
(From yocto-docs rev: f7f1a689a847ab4a01106eadacfccb4bec6c4b01)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ERROR: distcc-3.2-r0 do_fetch: Fetcher failure: Unable to find revision d8b18df3e9dcbe4f092bed565835d3975e99432c in branch 3.2 even from upstream
ERROR: distcc-3.2-r0 do_fetch: Fetcher failure for URL: 'git://github.com/distcc/distcc.git;branch=3.2'. Unable to fetch URL from any source.
ERROR: distcc-3.2-r0 do_fetch: Function failed: base_do_fetch
[v2]
upstream deleted the branch and the hash no longer exists.
Took the git snapshot from yocto and created a copy on my github.
There was no offical 3.2 release, only rc versions.
(From OE-Core rev: aee44c6b1c36fb1c1f760fec60087933d1e8ea79)
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before, waf.bbclass would fail to catch FileNotFoundError. Now, it will
catch this error and say that waf doesn't exist.
Fixes [YOCTO 12553]
(From OE-Core rev: f8321dedec7abe392f7e49ff8eee0640463adae5)
Signed-off-by: Amanda Brindle <amanda.r.brindle@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setup environment for builds requiring binary reproducibility.
Determine and export SOURCE_DATE_EPOCH per each recipe.
This is a crucial step to achieve binary reproducibility.
The value for this variable (timestamp) is obtained after source code for
a recipe has been unpacked, but before it is patched. If the code sources
come from a GIT repo, we get the timestamp from the top commit. (GIT repo
does not preserve file mktime timestamps). Otherwise, if GIT repo is not
present, we try to get mtime from known files such as NEWS, ChangeLog, etc.
If this also fails, we go through all files and get the timestamp from the
youngest one. We create an individual timestamp for each recipe.
The timestamp is stored in the file '__source_date_epoch.txt' (in the folder
source-date-epoch_). Later on, each task reads this file and sets
the exported value of SOURCE_DATE_EPOCH to the value found in the file.
Uasge:
INHERIT += "reproducible_build"
[YOCTO#11178]
[YOCTO#11179]
(From OE-Core rev: cc438ac7711dedbe05d654e99af9316c9215b02e)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was the default behavior with autotools, but is not with meson.
Otherwise, udev package will pull in the rest of systemd even
that is not desired.
[YOCTO #12618]
(From OE-Core rev: 7409d2d48b69adcdf039fb4aa8bd9ed62460daa9)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When systemd was upgraded from 234 to 237, the PACKAGECONFIG item
'resolved' is changed to 'resolve', this is because meson_options.txt
uses the word 'resolve' instead of 'resolved'.
However, this causes trouble for users. Backward compatibility is obviously
more important, because we might have bbappend files in other layers
using this PACKAGECONFIG item.
So change the name back to 'resolved'.
(From OE-Core rev: da7fc569e547b4105b00c11a0b41b70230bacc50)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In out-of-tree builds gtk-doc's setup-build target copies all the content from
$srcdir to $builddir. However, if some of this content is regenerated at
configure time this can happen:
1) configure writes new build/version.xml
2) make compile copies content, including the tarball's src/version.xml
to build/version.xml, and generates gtk-doc.
3) make install notices build/version.xml is older than configure.status,
so regenerates gtk-doc.
gtk-doc generation is a slow process at the best of times, so doing it twice
isn't good.
(From OE-Core rev: 9ea9d61f26a942dbbc90070b40ba0209021a4b46)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
termlib needs to be disabled on some targets e.g. mingw
this change paves the way for doing that. Functionally
it does not change anything for other platforms
(From OE-Core rev: 88f33e1e5ba4f85093f60a296cba3ee1c1341c43)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These variables force runtime tests during configure
they are already cached for other architectures
(From OE-Core rev: 7a0e456d9dcfe9d9d9a0dbd24a6083c8d40516ff)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To use 'glide' this class does the integration and reduces code
duplication.
(From OE-Core rev: e0dbcdc2ca0b05b6b062a0ec1496204bb2122fbf)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* fails for nativesdk-shadow with:
pwconv: /etc/passwd.29063: No such file or directory
pwconv: cannot lock /etc/passwd; try again later.
(From OE-Core rev: c292945611d9f825051ac4938bb22a7d42fff994)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* wrong revision of this patch, where the commit message didn't match
with the default PACKAGECONFIG value, was merged to master, update
it to avoid confusion
* it got enabled by default, but without the dependency on libidn in:
commit 5997981fa2c22609a88b8cbb595dbf7758b2f7c2
Author: Alexander Kanavin <alexander.kanavin@linux.intel.com>
AuthorDate: Thu Feb 1 20:02:08 2018 +0200
Subject: iputils: update to 20161105
* https://github.com/iputils/iputils/blob/master/RELNOTES.old
mentiones that IDN was enabled by default in:
[s20160308] and surprisingly the same in [s20150815]
but there are no release notes for s20151218 version we were using until
now, don't know how it really relates to [s20150815].
* but there are some issues with libidn as described in:
https://github.com/iputils/iputils/commit/f3a461603ef4fb7512ade3bdb73fe1824e294547
so disable it by default.
(From OE-Core rev: d5cf9fdc57b6e9237126c92a6d92a31099d007c9)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following perl module packages were removed from oe-core
with commit: 30fb4c8f329fe3aa3c528ffeba60ee7d702e873e
- libclass-isa-perl
- libenv-perl
- libdumpvalue-perl
- libfile-checktree-perl
- libi18n-collate-perl
- libpod-plainer-perl
Remove these from the maintainers list
Fixes: [Yocto #12582]
(From OE-Core rev: 9eafd2d8bff2cb4949ee83bf7c5505bfcbad93d4)
Signed-off-by: Tim Orling <timothy.t.orling@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Debian and Fedora both carry this patch, and the xf86-video-modesetting
driver seems better on recent hardware.
As an example, on a NUC6CAYS, the x11perf -aa10text and -rgb10text tests
see around a 20x increase.
[YOCTO #12019]
[YOCTO #12390]
(From OE-Core rev: 2e4934d5d4b2745ffcd76020b307b9021f8d8853)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade systemd-boot to 237.
As systemd has dropped autotools support, fix configure and compile
failures related to meson.
(From OE-Core rev: 086308aa2a5e332de6f00ed397c4a55d132f158f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the 'fstack-protector' and 'fstack-protector-strong' flags
as a workaround to fix the following error when building for qemux86
and qemuppc with musl.
undefined reference to `__stack_chk_fail_local'
(From OE-Core rev: 4871d3c2b6dd6c07a2adcfbc9ecfb22e4afa2d0d)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgrade systemd to 237.
Note that this version has dropped autotools support.
The following patches are rebased:
0004-Use-getenv-when-secure-versions-are-not-available.patch
0005-binfmt-Don-t-install-dependency-links-at-install-tim.patch
0007-use-lnr-wrapper-instead-of-looking-for-relative-opti.patch
0015-Revert-udev-remove-userspace-firmware-loading-suppor.patch
0018-check-for-uchar.h-in-configure.patch
0019-socket-util-don-t-fail-if-libc-doesn-t-support-IDN.patch
0001-add-fallback-parse_printf_format-implementation.patch
0002-src-basic-missing.h-check-for-missing-strndupa.patch
0007-check-for-missing-canonicalize_file_name.patch
0008-Do-not-enable-nss-tests.patch
0010-test-sizeof.c-Disable-tests-for-missing-typedefs-in-.patch
0011-nss-mymachines-Build-conditionally-when-HAVE_MYHOSTN.patch
The following backported patches are dropped:
0001-core-evaluate-presets-after-generators-have-run-6526.patch
0001-main-skip-many-initialization-steps-when-running-in-.patch
0001-meson-update-header-file-to-detect-memfd_create.patch
0003-fileio-include-sys-mman.h.patch
The following patch is dropped as autotools support is dropped:
0002-configure.ac-Check-if-memfd_create-is-already-define.patch
The following patches are newly added to fix problems:
0027-remove-nobody-user-group-checking.patch
0028-add-missing-FTW_-macros-for-musl.patch
0030-fix-missing-of-__register_atfork-for-non-glibc-build.patch
0031-fix-missing-ULONG_LONG_MAX-definition-in-case-of-mus.patch
Other changes are mostly autotools/meson related.
This new version has dropped ptest support, as there's no easy
way to do this in the framework of meson.
(From OE-Core rev: 906230a73b3ccfa4afd2a19a6b0aa18cd1d5fa08)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fixes:
WARNING: libsolv-0.6.33-r0 do_patch:
Some of the context lines in patches were ignored. This can lead to
incorrectly applied patches.
The context lines in the patches can be updated with devtool:
devtool modify <recipe>
devtool finish --force-patch-refresh <recipe> <layer_path>
Then the updated patches and the source tree (in devtool's workspace)
should be reviewed to make sure the patches apply in the correct place
and don't introduce duplicate lines (which can, and does happen
when some of the context is ignored). Further information:
http://lists.openembedded.org/pipermail/openembedded-core/2018-March/148675.htmlhttps://bugzilla.yoctoproject.org/show_bug.cgi?id=10450
Details:
Applying patch
0001-Add-fallback-fopencookie-implementation.patch
patching file ext/CMakeLists.txt
patching file ext/solv_xfopen.c
Hunk #1 succeeded at 12 with fuzz 1 (offset -1 lines).
Hunk #2 succeeded at 25 (offset -18 lines).
Hunk #3 succeeded at 34 (offset -18 lines).
Hunk #4 succeeded at 46 (offset -18 lines).
patching file ext/solv_xfopen_fallback_fopencookie.c
patching file ext/solv_xfopen_fallback_fopencookie.h
Now at patch 0001-Add-fallback-fopencookie-implementation.patch
(From OE-Core rev: 388a6cdef0a993d781141f7c375a198f4c4ab808)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Armin Kuster
Amanda Brindle
Juro Bystricky
Alexander Kanavin
Chen Qi
Andreas Müller
Ross Burton
Anuj Mittal
Khem Raj
Otavio Salvador
Martin Jansa
Tim Orling
Maxin B. John
Tanu Kaskinen
California Sullivan
Yi Zhao