If a build causes a real task to be run when the setscene task has already
run then it was possible for dependent packages to be rebuilding at the same
time as a rebuild of the packages they depended on, resulting in failures
when files were missing. This change looks in the setscene covered list and
removes anything where a dependency of the real task is going to be run (e.g.
do_install is going to be run even though the setscene equivalent of
do_populate_sysroot has already been run).
As an additional safeguard we also delete the stamp file for the setscene
task under these circumstances.
Fixes [YOCTO #792]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Add Freescale MPC8315E-RDB instructions (based on Wind River README passed
on by Bruce Ashfield)
* Add short info paragraph for RouterStation Pro (to match BeagleBoard)
* Add example for connecting to RouterStation Pro serial console with picocom
(From OE-Core rev: 58d443a2ff300ff290486b2153f8a90a8ca2a89b)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adds a test to avoid the "sh: bad number" error message during service
start or stop of nfsserver when there is no NFS_SERVERS value set in
/etc/default/nfsd.
(From OE-Core rev: 0f2debd9360abac54d3e44551af309f0bdde96e7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows "umount -f -a -r" in our initscripts to actually do something.
(From OE-Core rev: 578c938968857976f888f708f1f57cf862c7b3c4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Update to refer to Yocto documentation
* Change title as suggested by Scott Rifenbark
* List all qemu* machine targets
* Remove machines no longer in core layer
* Add instructions for routerstationpro (originally based on an email from
Mark Hatle)
(From OE-Core rev: f8e9b15aa694b0f6d3373c2b6bf8904fdb0c7b86)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Shows a warning during sanity checking if the scripts/bitbake wrapper is
not being used
* Check to see if pseudo is working during sanity checking, and if it
isn't an error occurs (if we are using the wrapper script and pseudo
has been built; otherwise it is a warning).
Fixes [YOCTO #653]
(From OE-Core rev: 0b06b69992dd3df1dfff7bde694d7ad23d8d15a0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For safety, always delete the stamp files in sstate_clean regardless of
whether the manifest file exists or not.
(From OE-Core rev: f781c35da9a11eefdb06bda72ca89753df863efa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid deleting stamp files whose names contain the current task's name as a
substring. This will be especially important for example if do_package_write
is ever made an sstate task (as it would previously have deleted the stamps
here for do_package_write_ipk etc.)
(From OE-Core rev: ea743ea30e2289733d27979e8ec921648342da0e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a setscene task failed previously it was showing an incorrect task
name in the error line. This patch ensures we show the correct name, also
including the "_setscene" suffix.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Disable hal usage at configure time to avoid dependency on hal (which is
deprecated). Only affects "halelements" which is of no use without hal.
Fixes [YOCTO #810] and reverts changes from c6b0c5720fa.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
zypper complains if uuidgen is not available, so add it to RRECOMMENDS
for the zypper package.
Addresses [BUGID #749]
(From OE-Core rev: 93fbcda210ba931e297205bb5094bce12a2b4666)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
uuidgen is needed by zypper and we don't want to drag in everything else
in util-linux, so split it out to a separate package.
(From OE-Core rev: bf536c8e06b35b8f72077fd7a39104eb5543a434)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the none server, events don't get processed unless the idle_commands
function gets called, which previously wasn't happening with getEvent();
thus UIs that use this to get events were not working.
Fixes [BUGID #561]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Remove some comments, imports etc. to do with XMLRPC (inherited from xmlrpc.py
which this file was based upon.)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
The demos and examples require a few optional plugins to operate correctly
(e.g. SQLite and JPEG support). The demos package requires the documentation
package to show descriptions for each demo/example, and assistant to show
the documentation.
Fixes [BUGID #492] and [BUGID #452].
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Differences from OE versions:
task-qte-toolchain-target.bb:
* Depend on task-poky-standalone-sdk-target instead of task-sdk-bare
* Add LIC_FILES_CHKSUM
* Correct libsqlite3-dev dependency for Poky
* Remove dependency on libts-dev
* Remove QtDeclarative as it does not build for 4.6.3. (This will need
to be addressed in a future update.)
task-qte-toolchain-host.bb
* Fix for Poky directory structure
* qt4-tools-sdk -> qt4-tools-nativesdk
meta-toolchain-qte:
* Fix for Poky directory structure
* Use "tar --owner=root" instead of fakeroot
* Remove angstrom-specific suffix
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Move avahi-discover-standalone to avahi-ui-utils as it's a GUI tool
* Split out avahi-ui dev files from avahi-dev to a libavahi-ui-dev package
(using the new nodeprrecs flag to avoid automatic RRECOMMENDS calculation
for avahi-dev)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Setting this flag disables the normal additions to RRECOMMENDS for a package
(useful when splitting dev / dbg packages).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Differences from OpenEmbedded qt4-tools-sdk:
* Convert to nativesdk and make fixes necessary to build
* Use .inc file in 4.6.3 version
* Add LIC_FILES_CHKSUM
* Fix LICENSE to match other Qt4 recipes
* Use http source URL to match other Qt4 recipes
* Whitespace fixes
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
BBCLASSEXTEND dbus to nativesdk for meta-toolchain-qte, and disable the
dependency on libsm when building in this context (thus avoiding a number of
sub-dependencies).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Differences from OE version:
* Add source checksums
* Correct LICENCE and move to .inc file
* Update HOMEPAGE
* Don't specify DEFAULT_PREFERENCE
* Remove S and SRC_URI from 4.7.1 (duplicates of .inc file values)
* Use http source URL to match other Qt4 recipes
* Don't add back tools previously disabled in poky
Differences from current (plus the above):
* Add Qt 4.7.1 recipe
* Specify -embedded to remove dependency on X (as we are only building tools)
* Disable some other options to reduce dependencies
* Specify -no-freetype / -no-fontconfig in .inc file rather than in .bb
* Use INC_PR
* Whitespace fixes
Differences from meta-openembedded version:
* Change the order of includes so that embedded/x11 overrides take precedence
* Move contents of do_install_append from qt-${PV}.inc to do_install in
qt4.inc as this is the same for 4.6.3 and 4.7.1 and gets in the way of
do_install_append in qt-embedded.inc.
* Don't add qte.sh to SRC_URI in qt-4.7.1.inc (this is embedded-specific)
* Don't specify DEFAULT_PREFERENCE
* Use http source URL to match other Qt4 recipes
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Changes from the meta-openembedded version:
* Change the order of includes so that embedded takes precedence (ensuring
SRC_URI additions from qt-embedded.inc work)
* Specify -embedded in qt-embedded.inc
* Remove SRC_URI and S which should come from qt-${PV}.inc
* Remove QT_DIR_NAME and QT_LIBINFIX as these come from qt4e.bbclass
* Correct LICENSE
* Set DESCRIPTION instead of SUMMARY as SUMMARY will inherit by default
* Add qthelp-lib-qtclucene.patch (required to build)
* Whitespace fixes
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Differences from meta-openembedded version:
* SRC_URI and S now come from qt-${PV}.inc since these are version specific
* Source checksums are also now in qt-${PV}.inc
* Remove do_compile as this is handled in qt-${PV}.inc
* Move contents of do_install_append from qt-${PV}.inc to do_install in
qt4.inc as this is the same for 4.6.3 and 4.7.1 and will get in the way of
do_install_append in qt-embedded.inc.
* Don't enable PostgreSQL, MySQL or SQLite 2.x plugins as we don't currently
have recipes for these DBMSs in Poky. These can be re-enabled easily when
or if we do.
* Use INC_PR in qt4-x11-free_4.6.3.bb
* Don't always specify -embedded config option in qt4.inc
* Don't add qte.sh to SRC_URI in qt-4.6.3.inc (this is embedded-specific)
Differences from what we have currently in Poky (plus the above):
* Set DESCRIPTION based on embedded/X11
* Move out arch-specific settings to qt4-arch.inc
* Add qt4x11.bbclass which can be inherited by application recipes to select
the X11 version (this makes more sense once the embedded version is added).
* Update HOMEPAGE
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
This package has been added from meta-openembedded in order to be able to
build qt4-embedded. The only change was to remove do_install() which was
exactly the same as autotools_do_install().
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
This ensures package runtime dependencies are up-to-date after splitting
out libuuid and libblkid in util-linux recipe
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Qing He <qing.he@intel.com>
Fixes "multiple repeat" or "nothing to repeat" errors when parsing recipes
with '++' in the file name.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
* Don't drag in all of Qt as runtime dependencies
* Use cmake instead of qmake. This ensures plugins are configured correctly.
* Split out vorbis and mad input plugins into separate packages
* Fix main package to include an output plugin and various other base files.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Fix the runtime dependencies of fotowall so it doesn't drag in the whole of
Qt4. As a bonus the appropriate Qt image plugins for loading jpeg, gif & tiff
files are now installed with fotowall making it actually usable.
Fixes [BUGID: #524]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
There needs to be a space at the end of DEPENDS_prepend or otherwise it can
collide with the contents of DEPENDS. The OE version of this file has this.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Detect and fail if filesystem in use for TMPDIR or SSTATE_DIR has an
unreasonably short file name length limit (eg. eCryptFS). This can cause
"file name too long" errors during poky builds (e.g. when writing sstate
files for packages with a git revision as the version).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Add a mechanism to avoid running more invasive checks every time bitbake is
invoked. Adds a file in conf/ (i.e. under user's build directory) that
tracks a new variable SANITY_VERSION (set in sanity.conf) as well as TMPDIR
and SSTATE_DIR, allowing checks to be run when these are changed.
Fixes [BUGID #562]
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
After some analysis of task dependencies I have adjusted the global whitelist
used to filter out variables that would otherwise cause unwanted changes in
task checksums for sstate packages.
The following changes have been made to BB_HASHBASE_WHITELIST:
* Fix typo: FILESEXTRAPATHS not FILESEXTRPATHS
* Add variables FILE_DIRNAME HOME LOGNAME SHELL TERM USER
* Remove variables DATE and TIME (these are referred to by a number of tasks
where they should affect the checksum, e.g. because they influence PV)
* Remove variable _ (not found in dependencies)
Additionally DATE and SRCDATE are excluded but only explicitly for
patch_do_patch, which uses these only to provide a warning if patches are
out of date.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Add a parameter to getVarFlag() to auto-expand the value of the flag. This
makes getVarFlag() more consistent with getVar(), and allows expansion of
vardeps and vardepsexclude (which has been done in this commit).
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Adds a vardepsexclude flag that can be used to exclude a dependency of
a variable (the opposite of vardeps). This will allow the exclusion of
variables from the hash generation much more selectively than blanket
whitelisting using BB_HASHBASE_WHITELIST.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
At the time of creating the hash, BB_TASKHASH can't really be valid and
should be excluded from the environment variable list used to create the
hash.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Paul Eggleton