Bruce Ashfield
4ab485f35b
Updating to the latest korg -stable release that comprises
the following commits:
d330ef1d295d Linux 5.10.203
9c957e2b5254 driver core: Release all resources during unbind before updating device links
2325d3b6b10f r8169: fix deadlock on RTL8125 in jumbo mtu mode
b29e6055db1e r8169: disable ASPM in case of tx timeout
8b76708eb9f1 mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulled
b532bc9b73e6 mmc: core: add helpers mmc_regulator_enable/disable_vqmmc
376fabe3677a mmc: block: Retry commands in CQE error recovery
bf62a283a779 mmc: core: convert comma to semicolon
bb785011843e mmc: cqhci: Fix task clearing in CQE error recovery
cb9ca7cc273b mmc: cqhci: Warn of halt or task clear failure
e94ededefc42 mmc: cqhci: Increase recovery halt timeout
2011f06e32ab cpufreq: imx6q: Don't disable 792 Mhz OPP unnecessarily
6b35f36ff8f0 cpufreq: imx6q: don't warn for disabling a non-existing frequency
910566a789a2 scsi: qla2xxx: Fix system crash due to bad pointer access
46a4bf13502f scsi: qla2xxx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
b19fe82b4b92 scsi: core: Introduce the scsi_cmd_to_rq() function
c2b6f7e48e38 smb3: fix caching of ctime on setxattr
f9aa2857c6e6 fs: add ctime accessors infrastructure
8d4237a149e3 drm/amdgpu: don't use ATRM for external devices
2df04d76c97d driver core: Move the "removable" attribute from USB to core
01fbfcd8105c ima: annotate iint mutex to avoid lockdep false positive warnings
8a3322a35f74 fbdev: stifb: Make the STI next font pointer a 32-bit signed offset
15bc430fc176 misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
a6128ad78771 misc: pci_endpoint_test: Add deviceID for AM64 and J7200
c922282d11b3 s390/cmma: fix detection of DAT pages
03e07092c6ce s390/mm: fix phys vs virt confusion in mark_kernel_pXd() functions family
cb420e35571c ASoC: SOF: sof-pci-dev: Fix community key quirk detection
b37e1fbe6d30 ASoC: SOF: sof-pci-dev: don't use the community key on APL Chromebooks
3a79fcb743f7 ASoC: SOF: sof-pci-dev: add parameter to override topology filename
4aeb3320d70e ASoC: SOF: sof-pci-dev: use community key on all Up boards
6368a32d26a3 ASoC: Intel: Move soc_intel_is_foo() helpers to a generic header
8e52b19d92e1 smb3: fix touch -h of symlink
889c84e2b200 net: ravb: Start TX queues after HW initialization succeeded
5d428cda38e8 net: ravb: Use pm_runtime_resume_and_get()
f78d0f301395 ravb: Fix races between ravb_tx_timeout_work() and net related ops
a36e00e957a2 r8169: prevent potential deadlock in rtl8169_close
8a909c119827 Revert "workqueue: remove unused cancel_work()"
72ce3379cd5e octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64
ef7af2105a25 net: stmmac: xgmac: Disable FPE MMC interrupts
f18bcace1294 selftests/net: mptcp: fix uninitialized variable warnings
cb1644f9f005 selftests/net: ipsec: fix constant out of range
fe7fd9c209e8 dpaa2-eth: increase the needed headroom to account for alignment
772fe1da9a8d ipv4: igmp: fix refcnt uaf issue when receiving igmp query packet
9ef94ec8e52e usb: config: fix iteration issue in 'usb_get_bos_descriptor()'
713530d3c8f1 USB: core: Change configuration warnings to notices
ae6e41066e6e hv_netvsc: fix race of netvsc and VF register_netdevice
4937fb36bbb8 Input: xpad - add HyperX Clutch Gladiate Support
5c4d5c8556ee btrfs: make error messages more clear when getting a chunk map
74ff16c84433 btrfs: send: ensure send_fd is writable
12a0ec5ed7cf btrfs: fix off-by-one when checking chunk map includes logical address
baaab02a8c0b btrfs: ref-verify: fix memory leaks in btrfs_ref_tree_mod()
2d6c2238acf8 btrfs: add dmesg output for first mount and last unmount of a filesystem
bab9cec493b6 parisc: Drop the HP-UX ENOSYM and EREMOTERELEASE error codes
b53dc7c766ae powerpc: Don't clobber f0/vs0 during fp|altivec register save
b5cbbc2b2da9 iommu/vt-d: Add MTL to quirk list to skip TE disabling
f62ceb880a71 bcache: revert replacing IS_ERR_OR_NULL with IS_ERR
18ac427906af dm verity: don't perform FEC for failed readahead IO
c3c9f9273822 dm-verity: align struct dm_verity_fec_io properly
5de40a7ffaa0 ALSA: hda/realtek: Add supported ALC257 for ChromeOS
cf80c538061e ALSA: hda/realtek: Headset Mic VREF to 100%
f338f738d7bd ALSA: hda: Disable power-save on KONTRON SinglePC
b02b66194d54 mmc: block: Do not lose cache flush during CQE error recovery
71c9fb31e18b firewire: core: fix possible memory leak in create_units()
d6bac7048f28 pinctrl: avoid reload of p state in list iteration
8fb79be6e980 io_uring: fix off-by one bvec index
f5f85ea5bb6a USB: dwc3: qcom: fix wakeup after probe deferral
5ac96667ea32 usb: dwc3: set the dma max_seg_size
2620c5977f49 usb: dwc3: Fix default mode initialization
d5325ed6eb7c USB: dwc2: write HCINT with INTMASK applied
5d7a5e63dc3b USB: serial: option: don't claim interface 4 for ZTE MF290
f1432dff5dd6 USB: serial: option: fix FM101R-GL defines
14a6e089d610 USB: serial: option: add Fibocom L7xx modules
f49ad460a2c8 bcache: fixup lock c->root error
be327b8f76c2 bcache: fixup init dirty data errors
3ebf83df623a bcache: prevent potential division by zero error
e74c2e6fecb7 bcache: check return value from btree_node_alloc_replacement()
c73dd8f4b476 dm-delay: fix a race between delay_presuspend and delay_bio
a70b6da7c640 hv_netvsc: Mark VF as slave before exposing it to user-mode
ff6c130e48a7 hv_netvsc: Fix race of register_netdevice_notifier and VF register
518ef825016d USB: serial: option: add Luat Air72*U series products
c841de6247e9 s390/dasd: protect device queue against concurrent access
89f9ba7ee702 bcache: fixup multi-threaded bch_sectors_dirty_init() wake-up race
cd7a0695906d bcache: replace a mistaken IS_ERR() by IS_ERR_OR_NULL() in btree_gc_coalesce()
be8af3b6c80d swiotlb-xen: provide the "max_mapping_size" method
8c4b5cc90843 ACPI: resource: Skip IRQ override on ASUS ExpertBook B1402CVA
0f312dc1eb2f ASoC: simple-card: fixup asoc_simple_probe() error handling
fcc60c0a1870 nfsd: lock_rename() needs both directories to live on the same fs
ec75d1d0cd2c ext4: make sure allocate pending entry not fail
10341e77e49f ext4: fix slab-use-after-free in ext4_es_insert_extent()
5527898c6a9f ext4: using nofail preallocation in ext4_es_insert_extent()
2ae2be6e7cd7 ext4: using nofail preallocation in ext4_es_insert_delayed_block()
aa6568033cfb ext4: using nofail preallocation in ext4_es_remove_extent()
608758ef8670 ext4: use pre-allocated es in __es_remove_extent()
fcb07d8ea363 ext4: use pre-allocated es in __es_insert_extent()
0cc7653887b0 ext4: factor out __es_alloc_extent() and __es_free_extent()
8234c1c690a3 ext4: add a new helper to check if es must be kept
62526a55fee7 MIPS: KVM: Fix a build warning about variable set but not used
3b2e8b30b0d7 media: ccs: Correctly initialise try compose rectangle
1301467cbe4c lockdep: Fix block chain corruption
cbfa5aadd650 USB: dwc3: qcom: fix ACPI platform device leak
68fe711312f1 USB: dwc3: qcom: fix resource leaks on probe deferral
2be451e7a2f1 nvmet: nul-terminate the NQNs passed in the connect command
86a7f67d7605 nvmet: remove unnecessary ctrl parameter
d24a18cb51bf afs: Fix file locking on R/O volumes to operate in local mode
6e48c3175d0b afs: Return ENOENT if no cell DNS record can be found
497e9b0b21a6 net: axienet: Fix check for partial TX checksum
8fb804dabdda amd-xgbe: propagate the correct speed and duplex status
b7c9e8c038f5 amd-xgbe: handle the corner-case during tx completion
a2e868ad07eb amd-xgbe: handle corner-case during sfp hotplug
ebc7fbd15a64 arm/xen: fix xen_vcpu_info allocation alignment
5ada292b5c50 net/smc: avoid data corruption caused by decline
3ae55e3a3734 net: usb: ax88179_178a: fix failed operations during ax88179_reset
27914bff9602 ipv4: Correct/silence an endian warning in __ip_do_redirect
f8467afa754d HID: fix HID device resource race between HID core and debugging support
2f0ea5e0944a HID: core: store the unique system identifier in hid_device
650e43dfe7d2 drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP full
cc3b63c089e7 ata: pata_isapnp: Add missing error check for devm_ioport_map()
9942c1948346 wireguard: use DEV_STATS_INC()
939352ad6502 drm/panel: simple: Fix Innolux G101ICE-L01 timings
a5e82e345f4a drm/panel: simple: Fix Innolux G101ICE-L01 bus flags
60660af9577a drm/panel: auo,b101uan08.3: Fine tune the panel power sequence
2c688ae2dd78 drm/panel: boe-tv101wum-nl6: Fine tune the panel power sequence
3b797242d178 afs: Make error on cell lookup failure consistent with OpenAFS
dbc1929a5214 afs: Fix afs_server_list to be cleaned up with RCU
c3bead2f8fca PCI: keystone: Drop __init from ks_pcie_add_pcie_{ep,port}()
ac65f8979b0e RDMA/irdma: Prevent zero-length STAG registration
(From OE-Core rev: 501af4c5f91746f934083178efdb1a59ff82ff51)
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Signed-off-by: Steve Sakoman <steve@sakoman.com>
Poky
Poky is an integration of various components to form a pre-packaged build system and development environment which is used as a development and validation tool by the Yocto Project. It features support for building customised embedded style device images and custom containers. There are reference demo images ranging from X11/GTK+ to Weston, commandline and more. The system supports cross-architecture application development using QEMU emulation and a standalone toolchain and SDK suitable for IDE integration.
Additional information on the specifics of hardware that Poky supports is available in README.hardware. Further hardware support can easily be added in the form of BSP layers which extend the systems capabilities in a modular way. Many layers are available and can be found through the layer index.
As an integration layer Poky consists of several upstream projects such as BitBake, OpenEmbedded-Core, Yocto documentation, the 'meta-yocto' layer which has configuration and hardware support components. These components are all part of the Yocto Project and OpenEmbedded ecosystems.
The Yocto Project has extensive documentation about the system including a reference manual which can be found at https://docs.yoctoproject.org/
OpenEmbedded is the build architecture used by Poky and the Yocto project. For information about OpenEmbedded, see the OpenEmbedded website.
Contribution Guidelines
The project works using a mailing list patch submission process. Patches should be sent to the mailing list for the repository the components originate from (see below). Throughout the Yocto Project, the README files in the component in question should detail where to send patches, who the maintainers are and where bugs should be reported.
A guide to submitting patches to OpenEmbedded is available at:
https://www.openembedded.org/wiki/How_to_submit_a_patch_to_OpenEmbedded
There is good documentation on how to write/format patches at:
https://www.openembedded.org/wiki/Commit_Patch_Message_Guidelines
Where to Send Patches
As Poky is an integration repository (built using a tool called combo-layer), patches against the various components should be sent to their respective upstreams:
OpenEmbedded-Core (files in meta/, meta-selftest/, meta-skeleton/, scripts/):
- Git repository: https://git.openembedded.org/openembedded-core/
- Mailing list: openembedded-core@lists.openembedded.org
BitBake (files in bitbake/):
- Git repository: https://git.openembedded.org/bitbake/
- Mailing list: bitbake-devel@lists.openembedded.org
Documentation (files in documentation/):
- Git repository: https://git.yoctoproject.org/cgit/cgit.cgi/yocto-docs/
- Mailing list: docs@lists.yoctoproject.org
meta-yocto (files in meta-poky/, meta-yocto-bsp/):
- Git repository: https://git.yoctoproject.org/cgit/cgit.cgi/meta-yocto
- Mailing list: poky@lists.yoctoproject.org
If in doubt, check the openembedded-core git repository for the content you intend to modify as most files are from there unless clearly one of the above categories. Before sending, be sure the patches apply cleanly to the current git repository branch in question.