mirror of
https://git.yoctoproject.org/poky
synced 2026-05-08 17:19:20 +00:00
Luca Ceresoli
e223f7cbb1
The udhcpc script fails to properly set a default route when: - 'ip' is present ($have_bin_ip -eq 1) - there are 2 or more interfaces connected to the same network (e.g. ethernet + wifi on the same home LAN / same DHCP server) In this case, when the first interface gets an address from DHCP (e.g. eth0), a default route is set correctly. When the second interface (e.g. wlan0) gets its address, 'ip route add' without 'dev $interface' sets the route on the other interface. The result looks like: # ip route default via 192.168.1.1 dev eth0 metric 5 default via 192.168.1.1 dev eth0 metric 10 # wrong dev here 192.168.1.0/24 dev eth0 scope link src 192.168.1.20 192.168.1.0/24 dev wlan0 scope link src 192.168.1.30 # The situation might go unnoticed until eth0 is disconnected, because only wlan0 is present but there is no route through wlan0. Fix by explicitly passing "dev $interface" to 'ip route add'. Note that all other 'ip' invocations already have "dev $interface" passed. (From OE-Core rev: bb526eee429f25b85372f41e4d6d2865bcc39173) Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
QEMU Emulation Targets ====================== To simplify development, the build system supports building images to work with the QEMU emulator in system emulation mode. Several architectures are currently supported in 32 and 64 bit variants: * ARM (qemuarm + qemuarm64) * x86 (qemux86 + qemux86-64) * PowerPC (qemuppc only) * MIPS (qemumips + qemumips64) Use of the QEMU images is covered in the Yocto Project Reference Manual. The appropriate MACHINE variable value corresponding to the target is given in brackets.