Re-enable parselogs testing for fvp-base and corstone1000-fvp, and add
an ignore file for the relevant entries. Also, increase the testing
being done on corstone1000-fvp.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add the bits to enable poky-altcfg to boot to prompt on fvp-base.
Unfortunately, ssh takes a very long time to come up, which causes the
ssh test to timeout. So, don't enable this by default in CI.
Also, switch to building full-cmdline instead of sato, since we're never
actually testing the graphics on this platform.
Signed-off-by: Jon Mason <jon.mason@arm.com>
This commit updates the linux-yocto version to the latest availabe one.
No additional work was needed to make it work in Corstone-1000.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The ts-tee driver was upstreamed into the v6.10 kernel. Remove
arm-tstee driver package, since the upstream one should be used.
optee and arm ffa driver are logging non-fatal errors in dmesg, which is
causing the parselogs test to fail. This is due to arm ffa needing
givc3.
Signed-off-by: Jon Mason <jon.mason@arm.com>
arm-tstee doesn't compile on 6.8 or newer kernels. Temporarily pin the
kernels of machines using this package back to 6.6 while developing a
fix.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update the preferred version of TrustedFirmware-M for Cortsone-1000
from 2.0.x to 2.1.x to benefit from the latest fixes and improvements
as well as to reduce the number of out-of-tree patches.
As a result of updating the version:
* Remove no longer required out-of-tree patches
* Rebase and update the numbering of the remaining out-of-tree patches
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add the changes necessary to get edk2 booting and testimage passing on
fvp-base. All that is really necessary is adding the dtb to the too
partition.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update the preferred version of TrustedFirmware-A for Cortsone-1000
from 2.10.x to 2.11.x to benefit from the latest fixes and improvements
as well as to reduce the number of out-of-tree patches.
As a result of updating the version:
* Remove no longer required out-of-tree patches
* Update the numbering of the remaining out-of-tree patches
Additionally remove unnecessary white spaces in modified BitBake files.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update the preferred version of OP-TEE OS for Cortsone-1000 from
4.1.x to 4.2.x to benefit from the latest fixes and improvements.
Signed-off-by: Bence Balogh <bence.balogh@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add support for tf-a version v2.11.0 and mbedtls 3.6.0. Modifications
to the license checksum were necessary due to the addition to that file
for DICE (which is Apache 2.0 licensed) for TF-A and the dual license of
mbedtls (Apache 2.0 and addition of GPLv2).
NOTE: FVP base is having (more of) an issue with CI on the newest TF-A,
with SSH tests timing out. Holding that back to the LTS version until
it cane be resolved.
Signed-off-by: Jon Mason <jon.mason@arm.com>
The SystemReady IR ACS test suite require that there is a valid ESP
partition available to the system. This change creates a new image that
only contains a ESP partition and ensures it's mounted on the second MMC
card so it's available when the SystemReady tests run.
The diagnostic level of the 2 MMC cards have also been lowered to
improve the ACS test duration.
Corrected a spelling mistake in the corstone1000-flash-firmware-image.bb
file.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Added the missing meta-arm-systemready required variable to enable its
use with the corstone1000-fvp machine. Also explicitly set all the
consoles.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This is mostly based on the existing qemu-generic-arm64 machine, but by
not being based on the genericarm64 and instead being specifically a
machine to run on the qemu sbsa-ref machine we get to tune differently.
Specifically, this configures sbsa-ref to be a Neoverse N2 (v9), and the
tune is set to match. Another notable difference to qemu-generic-arm64
is that the kernel configuration is at present defconfig. We may wish
to change this in the future to be the same fragmented configuration as
genericarm64.
We have to ignore two testimage parselogs failures: one from NUMA which
will be fixed in a future EDK2 release, and one from efifb where we
should be using the bochsdrm driver instead (further investigation is
needed)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add configuration settings to TF-A, OP-TEE and TS SPs needed to get TS
built and run on the fvp-base machine.
Signed-off-by: Gyorgy Szing <gyorgy.szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Increase the number of TLB entries from 0x80 to 0x400 and disable the
checking of memory attributes. In our CI, this makes testimage run in
576s instead of 803s.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Remove the preferred version so that we track the latest release.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This change upgrades the tftf version to v2.10 for the Corstone-1000.
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This change upgrades the trusted-firmware-m version to 2.10
for n1sdp.
Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Enable the patch-status warning for meta-arm and meta-arm-bsp.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
To allow us to continue to ship Corstone-1000 releases that only include
the firmware with the built in Linux image we need a way to build it
outside of the multiconfig builds.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
By building the Corstone-1000 firmware under the firmware multiconfig we
can also build a minimal standard core image to be mounted in the fvp as
a mass storage device.
To do this we had to enable the MMC card interface in the Corstone-1000
kernel configuration.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Bumped kernel version to v6.6 and rebased N1SDP kernel PCIe quirk patches on top of this new version.
Signed-off-by: Anusmita Dutta Mazumder <anusmita.duttamazumder@arm.com>
As we intend to build 2 Corstone-1000 disk images, one for the firmware
in flash and an external mass storage image the existing
corstone1000-image.bb file has been renamed to
corstone1000-flash-firmware-image.bb to make it clear what it's for.
The wks file for specifing the image layout has also been renamed to
make its purpose clearer.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
We can now use the standard poky distro configured to be small by
switching distrobution and using the standard minimal image
from poky.
To do this we also remove and image configuration options from the
machine config and apply them in the kas files.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Moves a number of setting from the machine definition to the actual
recipes they apply too.
Added image configuration and dependancies to the flash image definition
file.
Reordered the settings in the machine definition to group them by
component that are related to.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Moved the U-Boot configuration items from the machine definition to the
Corstone-1000 specific U-Boot append file as it makes it easier to the
U-Boot configuration for a machine in one place and to make it more
consistant with other platforms.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
This changeset fix the tftf tests issue on n1sdp. Before this change, the tftf tests were getting stuck on n1sdp.
The following changes have been done:
1. There were some tftf tests based on multicore which involve powering up the other cores. These tests were creating
issues and the same thing has already been mentioned in the tests-to-skip.txt file for n1sdp platform in tftf source.
Those tests are skipped while executing tftf and patch has been created.
2. The TFTF_MODE variable added for tftf v2.10 recipe file, as did earlier for tftf v2.9. With the help of this, we can
enable debug or relase mode. The configuration based on this has been added for n1sdp in the corresponding bbappend file.
3. Add PREFERRED_VERSION_tf-a-tests for v2.10.
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Since linux yocto kernel 6.5 is EOL and other layers like
meta-virtualization dropping support for it, it would be
sensible to downgrade the kernel to 6.1 which is a LTS.
This is a temporary change and later we would move to 6.6 when its
officially supported on N1SDP.
This revert the following commits:
* 1fe76c893c
* 21df60b921
Signed-off-by: Jon Mason <jon.mason@arm.com>
Updated to the latest version. Corstone1000 doesn't seem to boot. So,
pull back the old version to meta-arm-bsp for it to use temporarily.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update tf-a and mbedtls to the latest versions. Also, migrate the
previous version to meta-arm-bsp for corstone1000.
NOTE: in v2.10, the fiptool makefile was changed to reference LDOPTS
instead of LDLIBS.
NOTE: commit 408cde8a59080ac2caa11c4d99474b2ef09f90df in tf-a modifies
the qemu_sbsa starting offset, and per the commit comment, it requires
the edk2 same change. This is why the edk-platforms SHA has been
changed. There are only 19 patches between the previous SHA and this
one (most of which are adding a single platform). So, it shouldn't be
too impactful to bump the SHA (instead of making it a patch to apply
on top of the existing SHA).
NOTE: tf-a-tests added LDFLAGS to the makefile, causing the need for it
to be removed in the recipe.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Adds virtio-net configuration to use virtio-net in corstone1000-fvp.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Ross Burton <ross.burton@arm.com>
We already tell the FVP to be v8.4 cores, so tell the compiler to
tune for that instruction set too.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
corstone1000's uboot uses efitools-native from meta-efi-secure-boot, so
add the layer dependency to make this clear.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
1. Configure FVP base to allow Arm SystemReady IR ACS console access.
2. Configure FVP base Arm SystemReady IR ACS firmware build.
3. Add the machine-specific report.txt for FVP base.
4. Patch the check-sr-results.yaml and format-sr-results.yaml files
to handle the known differences between FVP base and the
expected ACS functionality.
5. Add a README with instructions of how to use the meta-arm-systemready
layer with fvp-base.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
For fvp-base, update the DEFAULT_TEST_SUITES to include
fvp_boot and fvp_devices. This is only the default behaviour;
individual recipes can override this using the TEST_SUITES
variable.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Jon Mason
Bence Balogh
Martin Jansa
Drew Reed
Ross Burton
Gyorgy Szing
Harsimran Singh Tungal
Ali Can Ozaslan
Anusmita Dutta Mazumder
Emekcan Aras
Khem Raj
Vikas Katariya
Debbie Martin