The SystemReady IR ACS test suite require that there is a valid ESP
partition available to the system. This change creates a new image that
only contains a ESP partition and ensures it's mounted on the second MMC
card so it's available when the SystemReady tests run.
The diagnostic level of the 2 MMC cards have also been lowered to
improve the ACS test duration.
Corrected a spelling mistake in the corstone1000-flash-firmware-image.bb
file.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Added the missing meta-arm-systemready required variable to enable its
use with the corstone1000-fvp machine. Also explicitly set all the
consoles.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This change upgrades the tftf version to v2.10 for the Corstone-1000.
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
To allow us to continue to ship Corstone-1000 releases that only include
the firmware with the built in Linux image we need a way to build it
outside of the multiconfig builds.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
By building the Corstone-1000 firmware under the firmware multiconfig we
can also build a minimal standard core image to be mounted in the fvp as
a mass storage device.
To do this we had to enable the MMC card interface in the Corstone-1000
kernel configuration.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
As we intend to build 2 Corstone-1000 disk images, one for the firmware
in flash and an external mass storage image the existing
corstone1000-image.bb file has been renamed to
corstone1000-flash-firmware-image.bb to make it clear what it's for.
The wks file for specifing the image layout has also been renamed to
make its purpose clearer.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
We can now use the standard poky distro configured to be small by
switching distrobution and using the standard minimal image
from poky.
To do this we also remove and image configuration options from the
machine config and apply them in the kas files.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Moves a number of setting from the machine definition to the actual
recipes they apply too.
Added image configuration and dependancies to the flash image definition
file.
Reordered the settings in the machine definition to group them by
component that are related to.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Moved the U-Boot configuration items from the machine definition to the
Corstone-1000 specific U-Boot append file as it makes it easier to the
U-Boot configuration for a machine in one place and to make it more
consistant with other platforms.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Updated to the latest version. Corstone1000 doesn't seem to boot. So,
pull back the old version to meta-arm-bsp for it to use temporarily.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Merge the common FVP configuration in fvp-common.inc into
fvp-base.conf since that is the only place it is inherited.
Drop setting MACHINE_FEATURES to "optee" because there is no
optee machine feature.
Signed-off-by: Debbie Martin <Debbie.Martin@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The fvp-baser-aemv8r64 machine will not be actively maintained.
Signed-off-by: Divin Raj <divin.raj@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bump kernel version to v6.4 and rebase the patches on
top of this new version.
Signed-off-by: Xueliang Zhong <xueliang.zhong@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Rationalise the port forwarding to be the same as the runqemu defaults,
so change the SSH port forward to be 2222=22 instead of 8022=22.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Updates optee-os and aligns with changes in v3.22 for Corstone-1000.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Updates trusted-firmware-a and aligns with changes in v2.9 for Corstone-1000.
Signed-off-by: Emekcan Aras <emekcan.aras@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update the trusted-firmware-a recipes to 2.9.0
Moving legacy recipes (2.8) for tc1 and corestone1000 to meta-arm-bsp
Signed-off-by: Jon Mason <jon.mason@arm.com>
The upstream u-boot recipe did a minor version update, which is causing
a "preferred version not available" warning. Add a '%' to resolve this
issue.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Port Corstone-1000 patches to U-Boot v2023.07
Include the latest FF-A patchset sent to the mailing list (v15).
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Upstream change 26d97acc71379ab6702fa54a23b6542a3f51779c changed the
IMAGE_LINK_NAME to have IMAGE_NAME_SUFFIX and breaks the automatic
finding of the image by name. Work around here until upstream fix can
be added.
Signed-off-by: Jon Mason <jon.mason@arm.com>
The fvp_devices test suite can be used to verify the following
functionality at runtime, common to most FVPs:
* CPU hotplug
* virtio-net device presence and functionality
* virtio-rng device presence and functionality
* PL031 RTC device presence and functionality
* SP805 watchdog device presence
The list of devices to be tested can be configured by a BSP using the
variable TEST_FVP_DEVICES.
Add this test suite for fvp-base and fvp-baser-aemv8r64.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The linuxboot test case is already FVP-specific due to the use of the
OEFVPTarget pexpect interface. Clarify this by renaming to fvp_boot.
So that fvp_boot can be used alongside other OEQA test cases (e.g. those
in OE-core):
* Call self.target.transition("off") at the start of the test to
ensure the model starts from reset
* Call self.target.transition("linux") to reuse the "wait for boot"
logic in OEFVPTarget.
Additionally, minimally validate the firmware boot by checking for
common error patterns in all console logs. Expose the runfvp config in
OEFVPTarget to support this.
Align the list of test cases executed on both fvp-base and
fvp-baser-aemv8r64 by using TEST_CASES:append = " fvp_boot" for both.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Make sure we setup the new variable for the configuration
of the SE-Proxy service for our machine. This will trigger
the right configuration building trusted services and all
psa-arch test pass as before.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Using absolute path in fvpconf will leak the host machine path.
This is a bit annoying when the builder and the runner doesn't use
the same filepath hierachy.
Switch to relative path instead of absolute.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The signed kernel image for the android kernel and legacy u-boot is no
longer booting. Remove this to allow for it to work until it can be
fixed.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add tc1 ecosystem FVP and bits to enable in the tc1 machine config file
Also, do some hacks to speed things up.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Recent changes in upstream u-boot recipes for signed fitimages, have
caused the existing code to no longer boot. Add a newly required
variable to get it working again. Tested using tc1 FVP.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bump the preferred corstone1000 to v3.20, drop patch
that is already included in this version.
Create the 3.20 bbappend and remove the entry in 3.18 bbappend.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The infrastructure for edk2 and fvp-base is already present, but not
being used. Make the changes to get it compiling cleanly, and add it to
CI.
Note: testing is not passing because edk2 isn't booting an image
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bump kernel version to v6.1 and rebase the patches on
top of this new version.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bump corstone1000 to u-boot version 2023.01, as at it
do some trailing spaces cleanup.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The initramfs needs to be very small, but since oe-core d6a62e kmod has
enabled OpenSSL support which doubles the size of the initramfs,
resulting in boot failures.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Upgrade to v2022.10
This includes Corstone-1000 out of tree patches.
FF-A patches are the latest sent to U-Boot mailing list (v8).
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Since oe-core 868dfb4 rng-tools is no longer depended on by openssh, so
we don't need to remove it ourself.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bring fvp-base and fvp-base-arm32 to match what is currently being done
in other fvps, and clean up the fvps to use a single fvp yml file (which
should enable better adding and removing of issues common to fvps, like
xorg test bugs).
Signed-off-by: Jon Mason <jon.mason@arm.com>
Update ACK to 5.15 and remove the 5.10 recipe
Signed-off-by: Rupinderjit Singh <rupinderjit.singh@arm.com>
Change-Id: I7d86367533248312bb7a54ba39166ddee5a025ef
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bump the kernel version to 5.19.9, remove backported ffa
related patch to previous version and fix issues in the arm
rpmsg driver.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Move the FVP include file to the include directory, matching what is
done for corstone1000 and other machines in meta-arm-bsp.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Drew Reed
Jon Mason
Harsimran Singh Tungal
Ali Can Ozaslan
Emekcan Aras
Debbie Martin
Abdellatif El Khlifi
Divin Raj
Xueliang Zhong
Ross Burton
Ziad Elhanafy
Peter Hoyes
Rui Miguel Silva
Clément Péron
Rupinderjit Singh