Since the Fixed Virtual Platforms simulation tools are not publicly
available, remove them from meta-arm-bsp layer.
Change-Id: Ifece50bfd494241499540030b6ac5968abd8ad1f
Issue-Id: SCM-951
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add the firmware-image-juno recipe to produce the Firmware Image for
Juno to be copied to the Configuration microSD card instead of the
trusted-firmware-a recipe.
Include the firmware-image-juno recipe in the EXTRA_IMAGEDEPENDS
only for juno MACHINE.
Change-Id: I316c70f22d57a3d85cc40386f1961ecd23edc865
Issue-Id: SCM-754 SCM-888
Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
Reviewed-By: Bertrand Marquis <bertrand.marquis@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add tf-a recipes, u-boot, machine configuration, and documentation to
support Arm Cortex-A5 Designstart.
The output of this build is compatible to run on the FVP and
the FPGA implementation of the package.
For more information see:
https://community.arm.com/developer/ip-products/processors/\
designstart/b/blog/posts/\
pre-silicon-software-development-with-arm-models-for-cortex-a5-designstart
Change-Id: Ie2715ad1871975cb7620d7a195c8dd74144629da
Signed-off-by: Rui Miguel Silva <rui.silva@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Do not try to add distro features from juno machine definition.
Modify juno documentation to mention usbhost and usbgadget in case
someone use a distribution not activating them by default.
Change-Id: I7fc44c9921ce3fdbf069fd5354f37bb2ec38ac53
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Add Yocto support for Gem5:
- add kernel configuration
- add recipes to build an image using boot-wrapper-aarch64
- add recipes to build Gem5 native to run the produced image
- add script to start image using gem5
- add recipe to create a dtb using gem5
- add recipe to build an image using gem5 boot wrapper
- add dts to linux kernel for gem5 for arm64
- add scons for python2 as this is required to build gem5 (until gem5
will support python3)
- add xen patch to limit number of interrupts if hardware is claiming to
have to more interrupts then the number supported by xen
When an image has been built it can be directly started using gem5 using
this command (console is available using telnet localhost 3456):
./tmp/deploy/tools/start-gem5.sh
Change-Id: Iec5ef735fc22643685e29ffbdaf63a55b1111c60
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Add Yocto support for Juno development board:
- add machine definition
- add kernel configuration
- add u-boot patch to get the environment from a file in flash
- add trusted firmware extension to produce a firmware image
- add ifupdown interfaces to start eth0 and eth1 on startup
Change-Id: I5046166cf1cc9e80a57815ef6bfb0cbb263a704e
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Add recipes and configuration files to add Yocto support
for FVP Base simulator from arm.
The following components are supported:
- trusted-firmware-a
- linux kernel (with specific kernel configuration and dts)
- xen (with meta-virtualization layer)
- unpacking and starting the generated image directly in Foundation
simulator (package must be download from www.arm.com website and put in
the directory downloads/licensed/silver.arm.com).
After building, the following command can be used to start a generated
image in fvp:
./tmp/deploy/tools/start-fvp-base.sh
Change-Id: I1759aecf32e84e25e813d7b0305f49616d4b47ef
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Add recipes and configuration files to add Yocto support
for Foundation armv8 simulator from arm.
The following components are supported:
- trusted-firmware-a
- linux kernel (with specific kernel configuration)
- xen (with meta-virtualization layer)
- unpacking and starting the generated image directly in Foundation
simulator (package must be download from www.arm.com website and put in
the directory downloads/licensed/silver.arm.com).
After building, the following command can be used to start a generated
image in foundation:
./tmp/deploy/tools/start-foundation-armv8.sh
Change-Id: Iade343c38f0799ee8523434d555cb3ca42068a86
Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
Diego Sueiro
Rui Silva
Bertrand Marquis