arm/trusted-firmware-m: setting the toolchain file path in PACKAGECONFIG

Toolchain files toolchain_GNUARM.cmake and toolchain_ARMCLANG.cmake are
located at trusted-firmware-m source directory.

This commit sets that.

Change-Id: If9c26f65b0c8111a6ff1f1a7d56610563efd501b
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>

.gitignore

@@ -0,0 +1 @@
+__pycache__

.gitlab-ci.yml

@@ -1,6 +1,6 @@
-image: ghcr.io/siemens/kas/kas:latest-release
+image: ghcr.io/siemens/kas/kas
 
-  # First do a common bootstrap, and then build all the targets
+# First do a common bootstrap, and then build all the targets
 stages:
   - prep
   - bootstrap
@@ -27,6 +27,7 @@ stages:
     - mkdir --verbose --parents $KAS_WORK_DIR $KAS_REPO_REF_DIR $SSTATE_DIR $DL_DIR $TOOLCHAIN_DIR $TOOLCHAIN_LINK_DIR
     # Must do this here, as it's the only way to make sure the toolchain is installed on the same builder
     - ./ci/get-binary-toolchains $DL_DIR $TOOLCHAIN_DIR $TOOLCHAIN_LINK_DIR
+    - sudo apt update && sudo apt install telnet -y
 
 # Generalised fragment to do a Kas build
 .build:
@@ -37,6 +38,17 @@ stages:
     - kas build $KASFILES
     - ./ci/check-warnings $KAS_WORK_DIR/build/warnings.log
 
+# Workaround for Zephyr not currectly handling TESTIMAGE_AUTO
+.build_and_test:
+  extends: .setup
+  script:
+    - KASFILES=$(./ci/jobs-to-kas $CI_JOB_NAME)
+    - kas shell --update --force-checkout $KASFILES -c 'cat conf/*.conf'
+    - kas build $KASFILES
+    - kas build $KASFILES -c testimage
+    - ./ci/check-warnings $KAS_WORK_DIR/build/warnings.log
+
+
 #
 # Prep stage, update repositories once
 #
@@ -44,7 +56,7 @@ update-repos:
   extends: .setup
   stage: prep
   script:
-  - flock --verbose --timeout 60 $KAS_REPO_REF_DIR ./ci/update-repos
+    - flock --verbose --timeout 60 $KAS_REPO_REF_DIR ./ci/update-repos
 
 #
 # Bootstrap stage, bootstrap and machine coverage
@@ -56,15 +68,18 @@ n1sdp/bootstrap:
   extends: .build
   stage: bootstrap
 
+n1sdp/clang/clang-bootstrap:
+  extends: .build
+  stage: bootstrap
+
 # What percentage of machines in the layer do we build
 machine-coverage:
   stage: bootstrap
   interruptible: true
   script:
-  - ./ci/check-machine-coverage
+    - ./ci/check-machine-coverage
   coverage: '/Coverage: \d+/'
 
-
 #
 # Build stage, the actual build jobs
 #
@@ -74,8 +89,16 @@ check-layers:
   extends: .setup
   coverage: '/Coverage: \d+/'
   script:
-  - kas shell --update --force-checkout ci/base.yml:ci/meta-python.yml --command \
-    "$CI_PROJECT_DIR/ci/check-layers.py $CI_PROJECT_DIR/ci/check-layers.yml $CI_PROJECT_DIR $KAS_WORK_DIR"
+    - kas shell --update --force-checkout ci/base.yml:ci/meta-arm-autonomy.yml:ci/meta-openembedded.yml --command \
+      "$CI_PROJECT_DIR/ci/check-layers.py $CI_PROJECT_DIR/ci/check-layers.yml $CI_PROJECT_DIR $KAS_WORK_DIR"
+
+pending-updates:
+  extends: .setup
+  artifacts:
+    paths:
+      - update-report.html
+  script:
+    - kas shell ci/qemuarm64.yml:ci/meta-openembedded.yml -c "$CI_PROJECT_DIR/scripts/machine-summary.py -t updates.html -o $CI_PROJECT_DIR/update-report.html $($CI_PROJECT_DIR/ci/listmachines.py meta-arm meta-arm-bsp)"
 
 corstone500:
   extends: .build
@@ -86,8 +109,10 @@ corstone700-fvp:
 corstone700-mps3:
   extends: .build
 
-fvp-base:
+fvp-base/testimage:
   extends: .build
+  tags:
+  - x86_64
 
 fvp-base-arm32:
   extends: .build
@@ -98,10 +123,13 @@ fvp-base-arm32/external-gccarm:
 fvp-baser-aemv8r64:
   extends: .build
 
+fvps:
+  extends: .build
+
 gem5-arm64:
   extends: .build
 
-gem5-arm64-xen:
+gem5-arm64/xen:
   extends: .build
 
 gem5-atp-arm64:
@@ -116,8 +144,8 @@ juno:
 juno/clang:
   extends: .build
 
-microbit-v1:
-  extends: .build
+microbit-v1/testimage-zephyr:
+  extends: .build_and_test
 
 musca-b1:
   extends: .build
@@ -134,7 +162,10 @@ n1sdp/armgcc:
 qemu-cortex-a53:
   extends: .build
 
-qemuarm/testimage:
+qemu-cortex-m3/testimage-zephyr:
+  extends: .build_and_test
+
+qemu-cortex-r5:
   extends: .build
 
 qemuarm64-sbsa:
@@ -152,6 +183,18 @@ qemuarm64-secureboot/clang/musl/testimage:
 qemuarm64-secureboot/musl/testimage:
   extends: .build
 
+qemuarm64/xen:
+  extends: .build
+
+qemuarm/clang/testimage:
+  extends: .build
+
+qemuarm/testimage:
+  extends: .build
+
+qemuarm/xen:
+  extends: .build
+
 qemuarmv5/testimage:
   extends: .build
 
@@ -160,7 +203,16 @@ sgi575:
 
 tc0:
   extends: .build
+  tags:
+    - x86_64
 
+tc1:
+  extends: .build
+  tags:
+    - x86_64
+
+toolchains:
+  extends: .build
 
 #
 # Utility tasks, not executed automatically
@@ -171,14 +223,14 @@ delete-dl-dir:
   stage: prep
   when: manual
   script:
-  - rm -rf $DL_DIR/*
+    - rm -rf $DL_DIR/*
 
 delete-repo-dir:
   extends: .setup
   stage: prep
   when: manual
   script:
-  - rm -rf $KAS_REPO_REF_DIR/*
+    - rm -rf $KAS_REPO_REF_DIR/*
 
 # Delete all sstate
 delete-sstate:
@@ -186,14 +238,14 @@ delete-sstate:
   stage: prep
   when: manual
   script:
-  - rm -rf $SSTATE_DIR/*
+    - rm -rf $SSTATE_DIR/*
 
 delete-toolchains:
   extends: .setup
   stage: prep
   when: manual
   script:
-  - rm -rf $TOOLCHAIN_DIR/*
+    - rm -rf $TOOLCHAIN_DIR/*
 
 # Wipe out old sstate
 prune-sstate:
@@ -201,7 +253,9 @@ prune-sstate:
   stage: prep
   when: manual
   script:
-  - find $SSTATE_DIR -type f -atime +30 -delete
+    - du -h -s $SSTATE_DIR
+    - find $SSTATE_DIR -type f -atime +30 -delete
+    - du -h -s $SSTATE_DIR
 
 # Report on disk usage
 usage:
@@ -209,4 +263,4 @@ usage:
   stage: prep
   when: manual
   script:
-  - du -h -s $DL_DIR $SSTATE_DIR $KAS_REPO_REF_DIR $TOOLCHAIN_DIR
+    - du -h -s $DL_DIR $SSTATE_DIR $KAS_REPO_REF_DIR $TOOLCHAIN_DIR

README.md

@@ -1,23 +1,46 @@
 Introduction
 ------------
-This repository contains Arm layers for OpenEmbedded
+This repository contains the Arm layers for OpenEmbedded.
 
-meta-arm:
-	This layer provides support for general recipes for the Arm
-	architecture.  Anything that's not needed explicitly for BSPs, the IOTA
-	distribution, or destined to be upstreamed belongs here.
+* meta-arm
 
-meta-arm-bsp:
-	This layer provides support for Arm reference platforms
+  This layer contains general recipes for the Arm architecture, such as firmware, FVPs, and Arm-specific integration.
 
-meta-arm-iota:
-	This layer provides support for Arm's IOTA Linux Distribution
+* meta-arm-autonomy
 
-meta-arm-toolchain:
-	This layer provides support for Arm's GNU-A toolset releases
+  This layer is the distribution for a reference stack for autonomous systems.
 
-meta-arm-autonomy:
-    This layer provides a reference stack for autonomous systems.
+* meta-arm-bsp
+
+  This layer contains machines for Arm reference platforms, for example FVP Base, N1SDP, and Juno.
+
+* meta-arm-toolchain
+
+  This layer contains recipes for Arm's binary toolchains (GCC and Clang for -A and -M), and a recipe to build Arm's GCC.
+
+* meta-atp
+
+  This layer contains recipes for the Adaptive Traffic Generation integration into meta-gem5.
+
+* meta-gem5
+
+  This layer contains recipes and machines for gem5, a system-level and processor simulator.
+
+
+Other Directories
+-----------------
+
+* ci
+
+  This directory contains gitlab continuous integration configuration files (KAS yaml files) as well as scripts needed for this
+
+* kas
+
+  This directory contains KAS yaml files to describe builds for systems not used in CI
+
+* scripts
+
+  This directory contains scripts used in running the CI tests
 
 Contributing
 ------------

ci/armgcc.yml

@@ -3,4 +3,4 @@ header:
 
 local_conf_header:
   cc: |
-    GCCVERSION = "arm-10.2"
+    GCCVERSION = "arm-10.3"

ci/base.yml

@@ -5,7 +5,7 @@ distro: poky
 
 defaults:
   repos:
-    refspec: hardknott
+    refspec: honister
 
 repos:
   meta-arm:
@@ -26,17 +26,22 @@ env:
 
 local_conf_header:
   base: |
-    CONF_VERSION = "1"
+    CONF_VERSION = "2"
     PACKAGE_CLASSES = "package_ipk"
-    LICENSE_FLAGS_WHITELIST += "armcompiler"
-    PACKAGECONFIG_remove_pn-qemu-system-native = "gtk+ sdl"
-    EXTRA_IMAGE_FEATURES_append = " debug-tweaks"
+    LICENSE_FLAGS_WHITELIST += "armcompiler Arm-FVP-EULA"
+    PACKAGECONFIG:remove:pn-qemu-system-native = "gtk+ sdl"
+    EXTRA_IMAGE_FEATURES:append = " debug-tweaks"
     BB_NUMBER_THREADS = "16"
     PARALLEL_MAKE = "-j16"
     INHERIT += "rm_work"
-    PACKAGECONFIG_append_pn-perf = " coresight"
+    PACKAGECONFIG:append:pn-perf = " coresight"
   noptest: |
-    DISTRO_FEATURES_remove = "ptest"
+    DISTRO_FEATURES:remove = "ptest"
+  sstate_mirror: |
+    BB_HASHSERVE_UPSTREAM = "typhoon.yocto.io:8687"
+    BB_HASHSERVE = "auto"
+    BB_SIGNATURE_HANDLER = "OEEquivHash"
+    SSTATE_MIRRORS = "file://.* http://sstate.yoctoproject.org/dev/PATH;downloadfilename=PATH"
 
 machine: unset
 

ci/check-layers.py

@@ -28,6 +28,7 @@ if __name__ == "__main__":
     cli.extend([args.metaarm / layer for layer in layers])
     cli.append("--dependency")
     cli.extend([args.others / layer for layer in dependencies])
+    cli.append("--no-auto-dependency")
 
     passed = 0
     process = subprocess.Popen(cli, stdout=subprocess.PIPE, stderr=subprocess.STDOUT, universal_newlines=True)

ci/check-layers.yml

@@ -3,5 +3,11 @@ layers:
   - meta-arm-bsp
   - meta-arm-toolchain
   - meta-gem5
+  - meta-arm-autonomy
 dependencies:
   - meta-openembedded/meta-oe
+  - meta-openembedded/meta-networking
+  - meta-openembedded/meta-python
+  - meta-openembedded/meta-filesystems
+  - poky/meta-poky
+  - meta-virtualization

ci/check-machine-coverage

@@ -2,6 +2,7 @@
 
 from pathlib import Path
 import sys
+from listmachines import list_machines
 
 metaarm = Path.cwd()
 
@@ -9,9 +10,10 @@ if metaarm.name != "meta-arm":
     print("Not running inside meta-arm")
     sys.exit(1)
 
+# Find all layers
+layers = (p.name for p in metaarm.glob("meta-*") if p.is_dir())
 # All machine configurations
-machines = metaarm.glob("meta-*/conf/machine/*.conf")
-machines = set(p.stem for p in machines)
+machines = list_machines(layers)
 
 # All kas files
 kas = metaarm.glob("ci/*.yml")

ci/clang-bootstrap.yml

@@ -0,0 +1,10 @@
+header:
+  version: 9
+
+target:
+  - binutils-cross-aarch64
+  - clang-cross-aarch64
+  - clang-native
+  - python3-native
+  - opkg-native
+  - rpm-native

ci/clang.yml

@@ -4,6 +4,7 @@ header:
 repos:
   meta-clang:
     url: https://github.com/kraj/meta-clang
+    refspec: master
 
 local_conf_header:
   clang: |

ci/fvp-base.yml

@@ -5,3 +5,12 @@ header:
 
 machine: fvp-base
 
+local_conf_header:
+  testimagefvp: |
+    INHERIT = "fvpboot"
+    # This fails but we can't add to the ignorelist from meta-arm yet
+    # https://bugzilla.yoctoproject.org/show_bug.cgi?id=14604
+    TEST_SUITES:remove = "parselogs"
+    # Tell testimage to connect to localhost:8022, and forward that to SSH in the FVP.
+    TEST_TARGET_IP = "localhost:8022"
+    FVP_CONFIG[bp.virtio_net.hostbridge.userNetPorts] ?= "8022=22"

ci/fvps.yml

@@ -0,0 +1,20 @@
+# Simple target to build the FVPs that are publically available
+
+header:
+  version: 9
+  includes:
+    - base.yml
+
+machine: qemuarm64
+
+local_conf_header:
+  sdk: |
+    SDKMACHINE = "x86_64"
+
+target:
+  - nativesdk-fvp-base-a-aem
+  - nativesdk-fvp-n1-edge
+  - nativesdk-fvp-sgi575
+  - nativesdk-fvp-corstone500
+  - nativesdk-fvp-corstone700
+  - nativesdk-fvp-tc0

ci/gem5-arm64-xen.yml

@@ -1,28 +0,0 @@
-
-header:
-  version: 9
-  includes:
-    - base.yml
-    - meta-python.yml
-
-repos:
-  meta-arm:
-    layers:
-      meta-gem5:
-  meta-openembedded:
-    url: https://git.openembedded.org/meta-openembedded
-    layers:
-      meta-oe:
-      meta-filesystems:
-      meta-networking:
-  meta-virtualization:
-    url: git://git.yoctoproject.org/meta-virtualization
-
-machine: gem5-arm64
-
-local_conf_header:
-  meta-virt:
-    DISTRO_FEATURES_append = " virtualization xen"
-
-target:
-  - xen-image-minimal

ci/gem5-arm64.yml

@@ -2,17 +2,13 @@ header:
   version: 9
   includes:
     - base.yml
+    - meta-openembedded.yml
 
 repos:
   meta-arm:
     layers:
       meta-gem5:
 
-  meta-openembedded:
-    url: https://git.openembedded.org/meta-openembedded
-    layers:
-      meta-oe:
-
 machine: gem5-arm64
 
 target:

ci/get-binary-toolchains

@@ -2,7 +2,7 @@
 set -u
 
 HOST_ARCH=$(uname -m)
-VER="10.2-2020.11"
+VER="10.3-2021.07"
 
 DOWNLOAD_DIR=$1
 TOOLCHAIN_DIR=$2

ci/listmachines.py

@@ -0,0 +1,29 @@
+#! /usr/bin/env python3
+
+import pathlib
+import typing
+import sys
+
+"""
+List all of the machines available under the listed sub-layers of meta-arm.
+"""
+def list_machines(layers: typing.Sequence[str]) -> typing.Set[str]:
+    machines = set()
+
+    # We know we're in meta-arm/scripts, so find the top-level directory
+    metaarm = pathlib.Path(__file__).resolve().parent.parent
+    if metaarm.name != "meta-arm":
+        raise Exception("Not running inside meta-arm")
+    
+    for layer in layers:
+        machines |= set(p.stem for p in (metaarm / layer / "conf" / "machine").glob("*.conf"))
+    return machines
+
+if __name__ == "__main__":
+    if len(sys.argv) > 1:
+        machines = list_machines(sys.argv[1:])
+        print(" ".join(sorted(machines)))
+        sys.exit(0)
+    else:
+        print("Usage:\n$ %s [layer name ...] " % sys.argv[0])
+        sys.exit(1)

ci/meta-arm-autonomy.yml

@@ -0,0 +1,10 @@
+header:
+  version: 9
+  includes:
+    - meta-openembedded.yml
+    - meta-virtualization.yml
+
+repos:
+  meta-arm:
+    layers:
+      meta-arm-autonomy:

ci/meta-openembedded.yml

@@ -5,5 +5,7 @@ repos:
   meta-openembedded:
     url: https://git.openembedded.org/meta-openembedded
     layers:
+      meta-filesystems:
+      meta-networking:
       meta-oe:
       meta-python:

ci/meta-virtualization.yml

@@ -0,0 +1,8 @@
+header:
+  version: 9
+  includes:
+    - meta-openembedded.yml
+
+repos:
+  meta-virtualization:
+    url: git://git.yoctoproject.org/meta-virtualization

ci/meta-zephyr.yml

@@ -1,8 +1,9 @@
 header:
   version: 9
   includes:
-    - meta-python.yml
+    - meta-openembedded.yml
 
 repos:
   meta-zephyr:
     url: https://git.yoctoproject.org/git/meta-zephyr
+    refspec: master

ci/microbit-v1.yml

@@ -4,7 +4,13 @@ header:
     - base.yml
     - meta-zephyr.yml
 
+local_conf_header:
+  nonbuilding_tests: |
+    ZEPHYRTESTS:remove = "common"
+  failing_tests: |
+    ZEPHYRTESTS:remove = "context early_sleep sleep"
+
 machine: microbit-v1
 
 target:
-  - zephyr-philosophers
+  - zephyr-kernel-test-all

ci/musca-s1.yml

@@ -2,7 +2,7 @@ header:
   version: 9
   includes:
     - base.yml
-    - meta-python.yml
+    - meta-openembedded.yml
 
 machine: musca-s1
 

ci/qemu-cortex-a53.yml

@@ -4,7 +4,11 @@ header:
     - base.yml
     - meta-zephyr.yml
 
+local_conf_header:
+  nonbuilding_tests: |
+    ZEPHYRTESTS:remove += "common device poll queue sleep"
+
 machine: qemu-cortex-a53
 
 target:
-  - zephyr-philosophers
+  - zephyr-kernel-test-all

ci/qemu-cortex-m3.yml

@@ -0,0 +1,16 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+    - meta-zephyr.yml
+
+local_conf_header:
+  tclibc: |
+    TCLIBC = "newlib"
+  nonbuilding_tests: |
+    ZEPHYRTESTS:remove = "common context pending poll sleep"
+
+machine: qemu-cortex-m3
+
+target:
+  - zephyr-kernel-test-all

ci/qemu-cortex-r5.yml

@@ -0,0 +1,10 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+    - meta-zephyr.yml
+
+machine: qemu-cortex-r5
+
+target:
+  - zephyr-philosophers

ci/qemuarm64.yml

@@ -0,0 +1,6 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+
+machine: qemuarm64

ci/qemuarmv5.yml

@@ -4,8 +4,3 @@ header:
     - base.yml
 
 machine: qemuarmv5
-
-local_conf_header:
-  bugs: |
-    # Remove parselogs until errors can be resolved
-    TEST_SUITES_remove = "parselogs"

ci/tc0.yml

@@ -4,3 +4,7 @@ header:
     - base.yml
 
 machine: tc0
+
+target:
+  - tc-artifacts-image
+  - perf

ci/tc1.yml

@@ -0,0 +1,10 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+
+machine: tc1
+
+target:
+  - tc-artifacts-image
+  - perf

ci/testimage-zephyr.yml

@@ -0,0 +1,8 @@
+header:
+  version: 9
+
+local_conf_header:
+  testimage: |
+    IMAGE_CLASSES += "testimage"
+    TEST_TARGET = "QemuTargetZephyr"
+    TEST_SUITES = "zephyr"

ci/testimage.yml

@@ -10,7 +10,7 @@ local_conf_header:
     TEST_SERVER_IP = "127.0.0.1"
     QEMU_USE_SLIRP = "1"
   packages: |
-    IMAGE_FEATURES_append = " ssh-server-dropbear"
+    IMAGE_FEATURES:append = " ssh-server-dropbear"
 
 # Multiple targets are available, put it down to just one
 target:

ci/toolchains.yml

@@ -0,0 +1,20 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+
+# Target is arm64 and SDK is x86-64 to ensure that we exercise both
+# architectures
+
+machine: qemuarm64
+local_conf_header:
+  toolchains: |
+    SDKMACHINE = "x86_64"
+
+# No target armcompiler as currently there is no arm64 build
+target:
+  - nativesdk-armcompiler
+  - gcc-aarch64-none-elf
+  - nativesdk-gcc-aarch64-none-elf
+  - gcc-arm-none-eabi
+  - nativesdk-gcc-arm-none-eabi

ci/xen.yml

@@ -0,0 +1,11 @@
+header:
+  version: 9
+  includes:
+    - meta-virtualization.yml
+
+local_conf_header:
+  meta-virt: |
+    DISTRO_FEATURES:append = " virtualization xen"
+
+target:
+  - xen-image-minimal

kas/fvp-baser-aemv8r64-bsp.yml

@@ -6,10 +6,12 @@ machine: fvp-baser-aemv8r64
 
 defaults:
   repos:
-    refspec: hardknott
+    refspec: honister
 
 repos:
   meta-arm:
+    url: https://git.yoctoproject.org/git/meta-arm
+    path: layers/meta-arm
     layers:
       meta-arm:
       meta-arm-bsp:
@@ -17,16 +19,23 @@ repos:
 
   poky:
     url: https://git.yoctoproject.org/git/poky
+    path: layers/poky
     layers:
       meta:
       meta-poky:
 
+env:
+  FVP_BASE_R_AEM_TARBALL_URI: ""
+  FVP_BASE_R_ARM_EULA_ACCEPT: "False"
+
 local_conf_header:
   base: |
-    CONF_VERSION = "1"
+    CONF_VERSION = "2"
     PACKAGE_CLASSES = "package_ipk"
-    PACKAGECONFIG_remove_pn-qemu-system-native = "gtk+ sdl"
-    EXTRA_IMAGE_FEATURES_append = " debug-tweaks"
+    PACKAGECONFIG:remove:pn-qemu-system-native = "gtk+ sdl"
+    EXTRA_IMAGE_FEATURES:append = " debug-tweaks"
+    IMAGE_CLASSES:append = " ${@oe.utils.ifelse(d.getVar('FVP_BASE_R_AEM_TARBALL_URI'), 'fvpboot', '')}"
+    LICENSE_FLAGS_WHITELIST:append = " ${@oe.utils.vartrue('FVP_BASE_R_ARM_EULA_ACCEPT', 'Arm-FVP-EULA', '', d)}"
 
 target:
   - core-image-minimal

kas/fvp-baser-aemv8r64-rt-bsp.yml

@@ -0,0 +1,8 @@
+header:
+  version: 9
+  includes:
+    - fvp-baser-aemv8r64-bsp.yml
+
+local_conf_header:
+  base-rt: |
+    PREFERRED_PROVIDER_virtual/kernel = "linux-yocto-rt"

meta-arm-autonomy/classes/alternate-kernel.bbclass

@@ -2,7 +2,7 @@
 # an alternate kernel (set via PREFERRED_PROVIDER_alternate/kernel).
 #
 # It is mandatory to also set the KERNEL_PACKAGE_NAME for the alternate kernel
-# recipe via KERNEL_PACKAGE_NAME_pn-${PREFERRED_PROVIDER_alternate/kernel} and
+# recipe via KERNEL_PACKAGE_NAME:pn-${PREFERRED_PROVIDER_alternate/kernel} and
 # its value needs to be different from "kernel" since this is the default set
 # for PREFERRED_PROVIDER_virtual/kernel.
 #
@@ -16,11 +16,11 @@ PREFERRED_PROVIDER_alternate/kernel ??= ""
 python () {
     alternate_kernel = d.getVar('PREFERRED_PROVIDER_alternate/kernel')
     if alternate_kernel:
-        alternate_kernel_pkg_name = d.getVar('KERNEL_PACKAGE_NAME_pn-%s' % alternate_kernel)
+        alternate_kernel_pkg_name = d.getVar('KERNEL_PACKAGE_NAME:pn-%s' % alternate_kernel)
         if alternate_kernel_pkg_name:
             d.appendVar('EXTRA_IMAGEDEPENDS', ' ' + alternate_kernel)
             d.appendVar('IMAGE_INSTALL', ' kernel-modules')
             d.appendVar('IMAGE_INSTALL', ' ' + alternate_kernel_pkg_name + '-modules')
         else:
-            raise bb.parse.SkipRecipe("No KERNEL_PACKAGE_NAME_pn-%s set" % alternate_kernel )
+            raise bb.parse.SkipRecipe("No KERNEL_PACKAGE_NAME:pn-%s set" % alternate_kernel )
 }

meta-arm-autonomy/classes/docker_extern_containers.bbclass

@@ -71,7 +71,7 @@ inherit features_check
 
 REQUIRED_DISTRO_FEATURES = "docker"
 
-RDEPENDS_${PN} = "packagegroup-docker-runtime-minimal"
+RDEPENDS:${PN} = "packagegroup-docker-runtime-minimal"
 
 CONTAINER_IMAGE_FILES ??= ""
 CONTAINERS_INSTALL_DIR ??= "${datadir}/docker/images"
@@ -112,4 +112,4 @@ do_install() {
 
 do_install[vardeps] += "CONTAINER_IMAGE_FILES"
 
-FILES_${PN} += "${CONTAINERS_INSTALL_DIR}"
+FILES:${PN} += "${CONTAINERS_INSTALL_DIR}"

meta-arm-autonomy/classes/image_types_xenguest.bbclass

@@ -22,7 +22,7 @@ xenguest_image_add_kernel() {
 # Add rootfs file to the image
 xenguest_image_add_rootfs() {
     call_xenguest_mkimage partial \
-        --disk-add-file=${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.${IMAGE_TYPEDEP_xenguest}:rootfs.${IMAGE_TYPEDEP_xenguest}
+        --disk-add-file=${IMGDEPLOYDIR}/${IMAGE_LINK_NAME}.${IMAGE_TYPEDEP:xenguest}:rootfs.${IMAGE_TYPEDEP:xenguest}
 }
 
 # Pack xenguest image
@@ -57,7 +57,7 @@ do_bootimg_xenguest[depends] += "xenguest-base-image:do_deploy"
 do_bootimg_xenguest[depends] += "${PN}:do_rootfs"
 
 # This set in python anonymous after, just set a default value here
-IMAGE_TYPEDEP_xenguest ?= "tar"
+IMAGE_TYPEDEP:xenguest ?= "tar"
 
 # We must not be built at rootfs build time because we need the kernel
 IMAGE_TYPES_MASKED += "xenguest"
@@ -158,7 +158,7 @@ python __anonymous() {
             # do_bootimg_xenguest will need the tar file
             d.appendVarFlag('do_bootimg_xenguest', 'depends', ' %s:do_image_tar' % (d.getVar('PN')))
             # set our TYPEDEP to the proper compression
-            d.setVar('IMAGE_TYPEDEP_xenguest', 'tar' + (rootfs_file.split('.tar', 1)[1] or ''))
+            d.setVar('IMAGE_TYPEDEP:xenguest', 'tar' + (rootfs_file.split('.tar', 1)[1] or ''))
 
         if kernel_needed:
             # Tell do_bootimg_xenguest to call xenguest_image_add_kernel

meta-arm-autonomy/classes/kernel-xenguest.bbclass

@@ -29,7 +29,7 @@ do_assemble_xenguest_initramfs() {
 }
 do_assemble_xenguest_initramfs[depends] += "${INITRAMFS_IMAGE}:do_merge_xenguestenv"
 
-kernel_do_deploy_append() {
+kernel_do_deploy:append() {
     if [ -f "${B}/${KERNEL_OUTPUT_DIR}/Image-initramfs.xenguest" ]; then
         install -m 0644 ${B}/${KERNEL_OUTPUT_DIR}/Image-initramfs.xenguest "$deployDir/Image-${INITRAMFS_NAME}.xenguest"
         ln -snf Image-${INITRAMFS_NAME}.xenguest $deployDir/Image-${INITRAMFS_LINK_NAME}.xenguest

meta-arm-autonomy/classes/xenguest_image_extra.bbclass

@@ -48,7 +48,7 @@ XENGUEST_IMAGE_VARS_EXTRA += "\
  XENGUEST_EXTRA_INIT_PRE XENGUEST_EXTRA_INIT XENGUEST_EXTRA_INIT_POST \
  XENGUEST_EXTRA_FILES XENGUEST_EXTRA_DISK_FILES"
 
-do_deploy_append() {
+do_deploy:append() {
     if [ -z "${XENGUEST_IMAGE_DEPLOY_DIR}" -o \
         -z "${XENGUEST_IMAGE_DEPLOY_SUBDIR}" ]; then
         die "Configuration error: XENGUEST_IMAGE_DEPLOY_DIR or XENGUEST_IMAGE_DEPLOY_SUBDIR is empty"

meta-arm-autonomy/conf/distro/include/arm-autonomy-guest.inc

@@ -1,7 +1,7 @@
 # This files is added when DISTRO_FEATURES contains arm-autonomy-guest
 
 # We need to have ipv4 activated
-DISTRO_FEATURES_append = " ipv4"
+DISTRO_FEATURES:append = " ipv4"
 
 # Build a xenguest type image
 IMAGE_CLASSES += "image_types_xenguest"
@@ -10,6 +10,6 @@ IMAGE_FSTYPES += "xenguest"
 # xenguest kernel extension to handle initramfs
 KERNEL_CLASSES += "kernel-xenguest"
 
-IMAGE_INSTALL_append = "${@bb.utils.contains('DISTRO_FEATURES', 'docker', \
+IMAGE_INSTALL:append = "${@bb.utils.contains('DISTRO_FEATURES', 'docker', \
                         ' packagegroup-docker-runtime-minimal', \
                         '', d)}"

meta-arm-autonomy/conf/distro/include/arm-autonomy-host.inc

@@ -1,18 +1,15 @@
 # This files is added when DISTRO_FEATURES contains arm-autonomy-host
 
-# We need to have xen and ipv4 activated
-DISTRO_FEATURES_append = " xen ipv4"
-DISTRO_FEATURES_NATIVE_append = " arm-autonomy-host"
+ARM_AUTONOMY_HOST_OVERRIDES = ":autonomy-host"
 
-# Since meta-virtualization master branch bumped to 4.15+stable we need to
-# force the 4.14+stable selection until we validate the new version
-PREFERRED_VERSION_xen = "4.14+stable%"
-PREFERRED_VERSION_xen-tools = "4.14+stable%"
+# We need to have xen and ipv4 activated
+DISTRO_FEATURES:append = " xen ipv4"
+DISTRO_FEATURES_NATIVE:append = " arm-autonomy-host"
 
 # Don't include kernels in standard images when building arm-autonomy-host
 # If the kernel image is needed in the rootfs the following should be set from
-# a bbappend: RDEPENDS_${KERNEL_PACKAGE_NAME}-base = "${KERNEL_PACKAGE_NAME}-image"
-RDEPENDS_${KERNEL_PACKAGE_NAME}-base ?= ""
+# a bbappend: RDEPENDS:${KERNEL_PACKAGE_NAME}-base = "${KERNEL_PACKAGE_NAME}-image"
+RDEPENDS:${KERNEL_PACKAGE_NAME}-base ?= ""
 
 # Require extra machine specific settings from meta-arm-bsp dynamic-layers only
 # if meta-arm-bsp is in the bblayers.conf

meta-arm-autonomy/conf/layer.conf

@@ -17,7 +17,7 @@ LAYERDEPENDS_meta-arm-autonomy = " \
    networking-layer \
    virtualization-layer \
 "
-LAYERSERIES_COMPAT_meta-arm-autonomy = "hardknott"
+LAYERSERIES_COMPAT_meta-arm-autonomy = "honister"
 
 # We don't activate virtualization feature from meta-virtualization as it
 # brings in lots of stuff we don't need. We need to disable the sanity check
@@ -29,7 +29,7 @@ ARM_AUTONOMY_LAYERDIR := "${LAYERDIR}"
 ARM_AUTONOMY_DISTRO_CFGDIR = "${ARM_AUTONOMY_LAYERDIR}/conf/distro/include/"
 
 # Add class to handle arm-autonomy distro extensions
-USER_CLASSES_append = " arm-autonomy-features"
+USER_CLASSES:append = " arm-autonomy-features"
 
 BBFILES_DYNAMIC += " \
     meta-arm-bsp:${LAYERDIR}/dynamic-layers/meta-arm-bsp/*/*/*.bbappend \

meta-arm-autonomy/conf/machine/arm64-autonomy-guest.conf

@@ -8,7 +8,7 @@ require conf/machine/include/arm/arch-armv8a.inc
 
 KERNEL_IMAGETYPE = "Image"
 
-IMAGE_FSTYPES += "tar.bz2"
+IMAGE_FSTYPES:append = " tar.bz2"
 
 PREFERRED_PROVIDER_virtual/kernel = "linux-yocto"
 PREFERRED_VERSION_linux-yocto ?= "5.10%"

meta-arm-autonomy/documentation/arm-autonomy-quickstart.md

@@ -29,7 +29,7 @@ First you must download the Yocto layers needed:
  - all other layers you might want to use
 
 For each of the downloaded layer make sure you checkout the release of Yocto
-you want to use (for example hardknott using `git checkout hardknott`).
+you want to use (for example honister using `git checkout honister`).
 
 Please follow [Yocto documentation](https://www.yoctoproject.org/docs/latest/brief-yoctoprojectqs/brief-yoctoprojectqs.html)
 in order to have the required dependencies.

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/arm-autonomy-machine-extra-settings.inc

@@ -1,7 +1,7 @@
 # Require extra machine specific settings
 ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE ?= ""
-ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE_n1sdp = "n1sdp-extra-settings.inc"
-ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE_fvp-base = "fvp-base-extra-settings.inc"
-ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE_juno = "juno-extra-settings.inc"
+ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE:n1sdp = "n1sdp-extra-settings.inc"
+ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE:fvp-base = "fvp-base-extra-settings.inc"
+ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE:juno = "juno-extra-settings.inc"
 
 require ${ARM_BSP_DYN_MACHINE_EXTRA_REQUIRE}

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/fvp-base-extra-settings.inc

@@ -1,12 +1,12 @@
 # Extra machine settings for fvp-base
 
-# FVP uses vda as hard drive and partition 2 is the
-# default rootfs, so use vda3 for guest lvm
-XENGUEST_MANAGER_VOLUME_DEVICE ?= "/dev/vda3"
+# FVP uses vda as hard drive and partition 1 is the
+# default rootfs, so use vda2 for guest lvm
+XENGUEST_MANAGER_VOLUME_DEVICE ?= "/dev/vda2"
 
 # We need to extend the wks search path to be able to find the wks file set in
 # ARM_AUTONOMY_WKS_FILE.
-WKS_SEARCH_PATH_prepend := "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic:"
+WKS_SEARCH_PATH:prepend := "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic:"
 
 ARM_AUTONOMY_WKS_FILE ?= "arm-autonomy-fvp-base-disk.wks.in"
 # set wks file only if INITRAMFS_IMAGE_BUNDLE is not set

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/juno-extra-settings.inc

@@ -7,7 +7,7 @@ XEN_DEVICETREE_DOM0_SIZE ?= "0x02400000"
 
 # We need to extend the wks search path to be able to find the wks file set in
 # ARM_AUTONOMY_WKS_FILE.
-WKS_SEARCH_PATH_prepend := "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic:"
+WKS_SEARCH_PATH:prepend := "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic:"
 
 ARM_AUTONOMY_WKS_FILE ?= "arm-autonomy-juno-disk.wks.in"
 # set wks file only if INITRAMFS_IMAGE_BUNDLE is not set

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/n1sdp-extra-settings.inc

@@ -2,7 +2,7 @@
 
 # We need to extent the wks search path to be able to find the wks file set in
 # ARM_AUTONOMY_WKS_FILE.
-WKS_SEARCH_PATH_prepend := "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic:"
+WKS_SEARCH_PATH:prepend := "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic:"
 
 ARM_AUTONOMY_WKS_FILE ?= "arm-autonomy-n1sdp-efidisk.wks.in"
 WKS_FILE = "${ARM_AUTONOMY_WKS_FILE}"
@@ -58,7 +58,7 @@ ${@bb.utils.contains('DISTRO_FEATURES', 'alternate-kernel', \
 KERNEL_PACKAGE_NAME_alternate/kernel ?= "kernel-rt"
 # When alternate-kernel DISTRO_FEATURE is present we set the kernel-rt by
 # default
-KERNEL_PACKAGE_NAME_pn-linux-yocto-rt = "\
+KERNEL_PACKAGE_NAME:pn-linux-yocto-rt = "\
 ${@ d.getVar('KERNEL_PACKAGE_NAME_alternate/kernel') \
 if bb.utils.contains('DISTRO_FEATURES', 'alternate-kernel', True, False, d) \
 else 'kernel' }"
@@ -87,4 +87,8 @@ d.getVar('PREFERRED_PROVIDER_alternate/kernel') else ''}"
 
 # Additionnal kernel modules are necessary for n1sdp to be able to mount FAT
 # filesystems using CP437.
-MACHINE_ESSENTIAL_EXTRA_RDEPENDS_append = " kernel-module-nls-cp437 kernel-module-nls-iso8859-1"
+MACHINE_ESSENTIAL_EXTRA_RDEPENDS:append = " kernel-module-nls-cp437 kernel-module-nls-iso8859-1"
+
+# '-mcpu=' and '-march=' conflicts for xen build
+# lets not set '-march=' and let xen to overwrite '-mcpu='
+TUNE_CCARGS:remove:pn-xen = "${TUNE_CCARGS_MARCH}${TUNE_CCARGS_MARCH_OPTS}"

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-bsp/images/firmware-image-juno.bbappend

@@ -1,14 +1,14 @@
 # Use OVERRIDES to minimize the usage of
 # ${@bb.utils.contains('DISTRO_FEATURES', 'autonomy-host', ...
-OVERRIDES_append = "${@bb.utils.contains('DISTRO_FEATURES', 'arm-autonomy-host', ':autonomy-host', '', d)}"
+OVERRIDES:append = "${ARM_AUTONOMY_HOST_OVERRIDES}"
 
-FILESEXTRAPATHS_prepend_autonomy-host := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS:prepend:autonomy-host := "${THISDIR}/${PN}:"
 
-DEPENDS_append_autonomy-host = " dos2unix-native"
+DEPENDS:append:autonomy-host = " dos2unix-native"
 
-SRC_URI_append_autonomy-host = " file://add-xen-support.patch;patchdir=../"
+SRC_URI:append:autonomy-host = " file://add-xen-support.patch;patchdir=../"
 
-do_install_append_autonomy-host() {
+do_install:append:autonomy-host() {
     mv -v ${D}/${UNPACK_DIR}/SOFTWARE/uEnv.txt \
           ${D}/${UNPACK_DIR}/SOFTWARE/uenvfile
     for dir in $(ls ${D}/${UNPACK_DIR}/SITE1/)
@@ -18,11 +18,11 @@ do_install_append_autonomy-host() {
 }
 
 DEPLOY_EXTRA_DEPS ??= ""
-DEPLOY_EXTRA_DEPS_autonomy-host = "xen:do_deploy xen-devicetree:do_deploy"
+DEPLOY_EXTRA_DEPS:autonomy-host = "xen:do_deploy xen-devicetree:do_deploy"
 
 do_deploy[depends] += "${DEPLOY_EXTRA_DEPS}"
 
-do_deploy_prepend_autonomy-host() {
+do_deploy:prepend:autonomy-host() {
     # To avoid dependency loop between firmware-image-juno:do_install,
     # xen:do_deploy and xen-devicetree:do_deploy when
     # INITRAMFS_IMAGE_BUNDLE = "1", we need to handle the xen and

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-bsp/u-boot/u-boot/fvp-base/xen_u-boot_kernel_addr.patch

@@ -1,4 +1,4 @@
-Upstream Status: Inappropriate [meta-arm-autonomy specifc u-boot config]
+Upstream-Status: Inappropriate [meta-arm-autonomy specific u-boot config]
 Signed-off-by: Nathan Dunne <nathan.dunne@arm.com>
 
 diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-bsp/u-boot/u-boot_%.bbappend

@@ -0,0 +1,10 @@
+# Use OVERRIDES to minimize the usage of
+# ${@bb.utils.contains('DISTRO_FEATURES', 'autonomy-host', ...
+OVERRIDES:append = "${ARM_AUTONOMY_HOST_OVERRIDES}"
+
+FILESEXTRAPATHS:prepend:autonomy-host:fvp-base := "${THISDIR}/${PN}:"
+
+#
+# FVP BASE
+#
+SRC_URI:append:autonomy-host:fvp-base = " file://xen_u-boot_kernel_addr.patch"

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-extended/xen-devicetree/xen-devicetree.bbappend

@@ -1,23 +1,23 @@
 # Platform dependent parameters
 
-FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/files:"
 
 # Add a dtb snippet to turn off iommu in dom0 on Juno board
-SRC_URI_append_juno = " file://xen-juno.dtsi"
-XEN_DEVICETREE_DTSI_MERGE_append_juno = " xen-juno.dtsi"
+SRC_URI:append:juno = " file://xen-juno.dtsi"
+XEN_DEVICETREE_DTSI_MERGE:append:juno = " xen-juno.dtsi"
 
 # Add a dtb snippet to remove pmu and iommu in dom0 on N1SDP
-SRC_URI_append_n1sdp = " file://xen-n1sdp.dtsi"
-XEN_DEVICETREE_DTSI_MERGE_append_n1sdp = " xen-n1sdp.dtsi"
+SRC_URI:append:n1sdp = " file://xen-n1sdp.dtsi"
+XEN_DEVICETREE_DTSI_MERGE:append:n1sdp = " xen-n1sdp.dtsi"
 # For N1SDP, the XEN_DEVICETREE_DEPEND and XEN_DEVICETREE_DTBS variables are
 # being set in meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/n1sdp-extra-settings.inc
 
 # Board specific configs
-XEN_DEVICETREE_DOM0_BOOTARGS_append_juno = " root=/dev/sda1 rootwait"
-XEN_DEVICETREE_XEN_BOOTARGS_append_juno = " console=dtuart dtuart=serial0 bootscrub=0 iommu=no"
+XEN_DEVICETREE_DOM0_BOOTARGS:append:juno = " root=/dev/sda1 rootwait"
+XEN_DEVICETREE_XEN_BOOTARGS:append:juno = " console=dtuart dtuart=serial0 bootscrub=0 iommu=no"
 
-XEN_DEVICETREE_DOM0_BOOTARGS_append_n1sdp = " root=/dev/sda2 rootwait"
-XEN_DEVICETREE_XEN_BOOTARGS_append_n1sdp = " console=dtuart dtuart=serial0 bootscrub=0 iommu=no"
+XEN_DEVICETREE_DOM0_BOOTARGS:append:n1sdp = " root=/dev/sda2 rootwait"
+XEN_DEVICETREE_XEN_BOOTARGS:append:n1sdp = " console=dtuart dtuart=serial0 bootscrub=0 iommu=no"
 
-XEN_DEVICETREE_DOM0_BOOTARGS_append_fvp-base = " root=/dev/vda2"
-XEN_DEVICETREE_XEN_BOOTARGS_append_fvp-base = " console=dtuart dtuart=serial0 bootscrub=0"
+XEN_DEVICETREE_DOM0_BOOTARGS:append:fvp-base = " root=/dev/vda1"
+XEN_DEVICETREE_XEN_BOOTARGS:append:fvp-base = " console=dtuart dtuart=serial0 bootscrub=0"

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-extended/xen/xen_%.bbappend

@@ -1,15 +1,15 @@
 # FVP Base support
-COMPATIBLE_MACHINE_fvp-base = "fvp-base"
-FILESEXTRAPATHS_prepend_fvp-base := "${THISDIR}/files:"
-SRC_URI_append_fvp-base = " file://early-printk.cfg"
+COMPATIBLE_MACHINE:fvp-base = "fvp-base"
+FILESEXTRAPATHS:prepend:fvp-base := "${THISDIR}/files:"
+SRC_URI:append:fvp-base = " file://early-printk.cfg"
 
 # Juno support
-COMPATIBLE_MACHINE_juno = "juno"
-FILESEXTRAPATHS_prepend_juno := "${THISDIR}/files:"
-SRC_URI_append_juno = " file://early-printk.cfg"
+COMPATIBLE_MACHINE:juno = "juno"
+FILESEXTRAPATHS:prepend:juno := "${THISDIR}/files:"
+SRC_URI:append:juno = " file://early-printk.cfg"
 
 # N1SDP support
-COMPATIBLE_MACHINE_n1sdp = "n1sdp"
-FILESEXTRAPATHS_prepend_n1sdp := "${THISDIR}/files:"
-SRC_URI_append_n1sdp = " file://n1sdp.cfg \
+COMPATIBLE_MACHINE:n1sdp = "n1sdp"
+FILESEXTRAPATHS:prepend:n1sdp := "${THISDIR}/files:"
+SRC_URI:append:n1sdp = " file://n1sdp.cfg \
                          file://early-printk.cfg"

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-kernel/linux/arm-autonomy-kmeta-extra/bsp/arm-platforms/n1sdp/n1sdp-preempt-rt.scc

@@ -1,6 +0,0 @@
-define KMACHINE n1sdp
-define KTYPE preempt-rt
-define KARCH arm64
-
-kconf non-hardware ktypes/developer/developer.cfg
-kconf non-hardware ktypes/preempt-rt/preempt-rt.cfg

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-kernel/linux/arm-autonomy-kmeta-extra/features/arm-autonomy/disable-arm64-sve.cfg

@@ -1,4 +0,0 @@
-# We need to turn off SVE support in the Linux kernel otherwise Xen is stopping
-# Linux kernel with a coredump while trying to access ZEN bit of CPACR1 core
-# register.
-# CONFIG_ARM64_SVE is not set

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-kernel/linux/arm-autonomy-kmeta-extra/features/arm-autonomy/disable-arm64-sve.scc

@@ -1,3 +0,0 @@
-define KFEATURE_DESCRIPTION "Disable SVE support"
-
-kconf non-hardware disable-arm64-sve.cfg

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-kernel/linux/arm-autonomy-kmeta-extra/features/arm-autonomy/preempt-rt-extras.cfg

@@ -1,7 +0,0 @@
-# Yocto kernel-cache sets CONFIG_NLS_CODEPAGE_437=m for LINUX_KERNEL_TYPR=preempt-rt
-CONFIG_NLS_CODEPAGE_437=y
-# Yocto kernel-cache sets CONFIG_NLS_ISO8859_1=m for LINUX_KERNEL_TYPR=preempt-rt
-CONFIG_NLS_ISO8859_1=y
-
-# Set the timer interrupt run at 1000 Hz to have a fast response
-CONFIG_HZ_1000=y

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-kernel/linux/arm-autonomy-kmeta-extra/features/arm-autonomy/preempt-rt-extras.scc

@@ -1,3 +0,0 @@
-define KFEATURE_DESCRIPTION "Extra kernel configs when building with PREEMPT_RT"
-
-kconf non-hardware preempt-rt-extras.cfg

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-kernel/linux/linux-%.bbappend

@@ -1,15 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}:"
-
-#
-# arm-autonomy kmeta extra
-#
-SRC_URI_append = " file://arm-autonomy-kmeta-extra;type=kmeta;name=arm-autonomy-kmeta-extra;destsuffix=arm-autonomy-kmeta-extra"
-
-# We need to turn off SVE support in the Linux kernel otherwise Xen is stopping
-# Linux kernel with a coredump while trying to access XEN bit of CPACR1 core
-# register.
-LINUX_ARM_AUTONOMY_DISABLE_ARM64_SVE = "${@bb.utils.contains_any('DISTRO_FEATURES', \
-                                         'arm-autonomy-host arm-autonomy-guest', \
-                                         ' features/arm-autonomy/disable-arm64-sve.scc','',d)}"
-
-KERNEL_FEATURES_append_fvp-base = "${LINUX_ARM_AUTONOMY_DISABLE_ARM64_SVE}"

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/wic/arm-autonomy-fvp-base-disk.wks.in

@@ -2,16 +2,13 @@
 # long-description: Creates a partitioned disk image that the user
 # can directly dd to boot media.
 
-# For FVP Base first partition is empty to keep compatibility with disk.img
-part --label empty --source empty --ondisk sda --size="1M" --system-id 8e --align 1024
-
-# Second partition is rootfs normally populated as /dev/vda2
+# For FVP Base first partition is rootfs normally populated as /dev/vda1
 part / --source rootfs --ondisk sda --fstype=ext4 --label root --align 1024
 
-# Third partition to accomodate guests images normally populated as /dev/vda3 (used by XENGUEST_MANAGER_VOLUME_DEVICE)
+# Second partition to accomodate guests images normally populated as /dev/vda2 (used by XENGUEST_MANAGER_VOLUME_DEVICE)
 part --label guests --source empty --ondisk sda --size="${GUEST_PART_SIZE}${GUEST_PART_SIZE_UNIT}" --system-id 8e --align 1024
 
-# Fourth partition is user defined entry normally populated as /dev/vda4
+# Third partition is user defined entry normally populated as /dev/vda3
 ${AUTONOMY_HOST_EXTRA_PARTITION}
 
 bootloader --ptable msdos

meta-arm-autonomy/recipes-bsp/grub/grub-efi_%.bbappend

@@ -1 +1,3 @@
-GRUB_BUILDIN += "${@bb.utils.contains('DISTRO_FEATURES', 'arm-autonomy-host', 'xen_boot', '', d)}"
+OVERRIDES:append = "${ARM_AUTONOMY_HOST_OVERRIDES}"
+
+GRUB_BUILDIN:append:autonomy-host = " xen_boot"

meta-arm-autonomy/recipes-bsp/u-boot/u-boot_2021.01.bbappend

@@ -1,9 +0,0 @@
-# Machine specific u-boot
-
-FILESEXTRAPATHS_prepend := "${THISDIR}/${BP}:"
-
-#
-# FVP BASE
-#
-
-SRC_URI_append_fvp-base = "${@bb.utils.contains('DISTRO_FEATURES', 'arm-autonomy-host', ' file://xen_u-boot_kernel_addr.patch', '', d)}"

meta-arm-autonomy/recipes-containers/import-docker-containers/import-docker-containers.bb

@@ -25,7 +25,7 @@ INITSCRIPT_PARAMS = "start 30 2 3 4 5 ."
 INITSCRIPT_NAME = "import_containers.sh"
 
 S = "${WORKDIR}"
-do_install_append() {
+do_install:append() {
     install -d ${D}${sysconfdir}/init.d
     install -m 755 import_containers.sh ${D}${sysconfdir}/init.d
 

meta-arm-autonomy/recipes-containers/packagegroups/packagegroup-docker-runtime-minimal.bb

@@ -8,7 +8,7 @@ DESCRIPTION = "The minimal set of packages required for running Docker"
 
 inherit packagegroup
 
-RDEPENDS_${PN} = "\
+RDEPENDS:${PN} = "\
     docker-ce \
     docker-ce-contrib \
     kernel-module-xt-nat \

meta-arm-autonomy/recipes-core/busybox/busybox_%.bbappend

@@ -1,4 +1,8 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+# Use OVERRIDES to minimize the usage of
+# ${@bb.utils.contains('DISTRO_FEATURES', 'arm-autonomy-host', ...
+OVERRIDES:append = "${ARM_AUTONOMY_HOST_OVERRIDES}"
+
+FILESEXTRAPATHS:prepend:autonomy-host := "${THISDIR}/${PN}:"
 
 # The --exclude flag in Busybox tar is required by xenguest-mkimage
-SRC_URI += "file://feature_tar_long_options.cfg"
+SRC_URI:append:autonomy-host = " file://feature_tar_long_options.cfg"

meta-arm-autonomy/recipes-core/init-ifupdown/init-ifupdown_1.0.bbappend

@@ -3,7 +3,9 @@
 # configuration by adding network network interface configuration file under
 # interfaces.d directory.
 
-do_install_append() {
+OVERRIDES:append = "${ARM_AUTONOMY_HOST_OVERRIDES}"
+
+do_install:append:autonomy-host() {
     # Add scan of interfaces.d to interfaces file
     cp -f ${WORKDIR}/interfaces ${WORKDIR}/interfaces.subdir
     echo "source-directory ${sysconfdir}/network/interfaces.d/" \

meta-arm-autonomy/recipes-core/sysvinit/sysvinit-inittab_2.%.bbappend

@@ -1,16 +1,20 @@
-# if arm-autonomy-guest is activated, we are running as a xen guest so we must
-# have a console on hvc0
-# This is normally done in meta-virtualization if xen is activated but here
-# we don't have xen activated.
-#
+# if arm-autonomy-host or arm-autonomy-guest are activated, we need to install
+# the getty-wrapper to spawn the login console on /dev/hvc0.
+# This is normally done in meta-virtualization if virtualization and xen
+# DISTRO_FEATURES are activated.
 
-SYSVINIT_ADDHVC0 = "${@bb.utils.contains('DISTRO_FEATURES', \
-    'arm-autonomy-guest', 'true', 'false', d)}"
+# In both arm-autonomy-host and arm-autonomy-guest we don't have virtualization
+# in DISTRO_FEATURE. Hence, manually include sysvinit-inittab_virtualization.inc
+# to install the getty-wrapper.
+require ${@bb.utils.contains_any('DISTRO_FEATURES', \
+                                 'arm-autonomy-host arm-autonomy-guest', \
+                                 'recipes-core/sysvinit/sysvinit-inittab_virtualization.inc', \
+                                 '', d)}
 
-do_install_append() {
-    if ${SYSVINIT_ADDHVC0}; then
-        echo "" >> ${D}${sysconfdir}/inittab
-        echo "X0:12345:respawn:/sbin/getty 115200 hvc0" >> \
-            ${D}${sysconfdir}/inittab
-    fi
-}
+# For arm-autonomy-guest we don't have xen in DISTRO_FEATURES. Hence, manually
+# include sysvinit-inittab_xen.inc to append the getty-wrapper entry to
+# /etc/inittab.
+require ${@bb.utils.contains('DISTRO_FEATURES', \
+                             'arm-autonomy-guest', \
+                             'recipes-core/sysvinit/sysvinit-inittab_xen.inc', \
+                             '', d)}

meta-arm-autonomy/recipes-devtools/qemu/qemu-autonomy-host.inc

@@ -0,0 +1,8 @@
+# For Xen we only need the i386 binaries
+QEMU_TARGETS = "i386"
+
+PACKAGECONFIG[noaudio] = "--audio-drv-list='',,"
+PACKAGECONFIG:append = " noaudio"
+PACKAGECONFIG:remove = "fdt sdl kvm"
+
+require recipes-devtools/qemu/qemu-package-split.inc

meta-arm-autonomy/recipes-devtools/qemu/qemu_%.bbappend

@@ -1,12 +1,3 @@
-# Use OVERRIDES to minimize the usage of
-# ${@bb.utils.contains('DISTRO_FEATURES', 'arm-autonomy-host', ...
-OVERRIDES_append = "${@bb.utils.contains('DISTRO_FEATURES', 'arm-autonomy-host', ':autonomy-host', '', d)}"
-
-# For Xen we only need the i386 binaries
-QEMU_TARGETS_autonomy-host = "i386"
-
-PACKAGECONFIG[noaudio] = "--audio-drv-list='',,"
-PACKAGECONFIG_append_autonomy-host = " noaudio"
-PACKAGECONFIG_remove_autonomy-host = "fdt sdl kvm"
-
-require ${@bb.utils.contains('DISTRO_FEATURES', 'arm-autonomy-host', 'recipes-devtools/qemu/${BPN}-package-split.inc', '', d)}
+require ${@bb.utils.contains('DISTRO_FEATURES', \
+                             'arm-autonomy-host', \
+                             'qemu-autonomy-host.inc', '', d)}

meta-arm-autonomy/recipes-extended/xen-devicetree/xen-devicetree.bb

@@ -16,7 +16,7 @@ DESCRIPTION = "Add entries in DTB for Xen and Dom0"
 # customizable parameters
 # kernel size is passed to xen via xen.dtb so we need to add
 # 'virtual/kernel:do_deploy' as a dependency
-XEN_DEVICETREE_DEPEND_append = " virtual/kernel:do_deploy"
+XEN_DEVICETREE_DEPEND:append = " virtual/kernel:do_deploy"
 XEN_DEVICETREE_DTBS ?= "${KERNEL_DEVICETREE}"
 XEN_DEVICETREE_XEN_BOOTARGS ?= "noreboot dom0_mem=${XEN_DEVICETREE_DOM0_MEM}"
 XEN_DEVICETREE_DOM0_MEM ?= "1024M,max:1024M"

meta-arm-autonomy/recipes-extended/xen/xen-tools_%.bbappend

@@ -1,4 +1,4 @@
-PACKAGECONFIG_remove = "\
+PACKAGECONFIG:remove = "\
     ${@bb.utils.contains('DISTRO_FEATURES', \
                          'arm-autonomy-host', \
                          'sdl', '', d)}"

meta-arm-autonomy/recipes-extended/xen/xen-tools_4.14.bbappend

@@ -1,4 +1,7 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-4.14:"
+# Use OVERRIDES to minimize the usage of
+# ${@bb.utils.contains('DISTRO_FEATURES', 'arm-autonomy-host', ...
+OVERRIDES:append = "${ARM_AUTONOMY_HOST_OVERRIDES}"
 
-SRC_URI += "file://0001-vif-nat-fix-hostname.patch \
-           "
+FILESEXTRAPATHS:prepend:autonomy-host := "${THISDIR}/${PN}-4.14:"
+
+SRC_URI:append:autonomy-host = " file://0001-vif-nat-fix-hostname.patch"

meta-arm-autonomy/recipes-extended/xen/xen_%.bbappend

@@ -1,9 +1,10 @@
+# Use OVERRIDES to minimize the usage of
+# ${@bb.utils.contains('DISTRO_FEATURES', 'arm-autonomy-host', ...
+OVERRIDES:append = "${ARM_AUTONOMY_HOST_OVERRIDES}"
+
 # Make Xen machine specific
 # This ensures that sstate is properly handled and that each machine can have
 # its own configuration
-PACKAGE_ARCH = "${MACHINE_ARCH}"
+PACKAGE_ARCH:autonomy-host = "${MACHINE_ARCH}"
 
-PACKAGECONFIG_remove = "\
-    ${@bb.utils.contains('DISTRO_FEATURES', \
-                         'arm-autonomy-host', \
-                         'sdl', '', d)}"
+PACKAGECONFIG:remove:autonomy-host = "sdl"

meta-arm-autonomy/recipes-extended/xen/xen_4.14.bbappend

@@ -1,5 +1,9 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-4.14:"
+# Use OVERRIDES to minimize the usage of
+# ${@bb.utils.contains('DISTRO_FEATURES', 'arm-autonomy-host', ...
+OVERRIDES:append = "${ARM_AUTONOMY_HOST_OVERRIDES}"
 
-SRC_URI += " \
+FILESEXTRAPATHS:prepend:autonomy-host := "${THISDIR}/${PN}-4.14:"
+
+SRC_URI:append:autonomy-host = " \
     file://0001-xen-arm-Throw-messages-for-unknown-FP-SIMD-implement.patch \
     "

meta-arm-autonomy/recipes-extended/xenguest/xenguest-base-image.bb

@@ -46,7 +46,7 @@ XENGUEST_IMAGE_SRC_URI_DISK_FILES ??= ""
 
 # Add xen files
 # Any extrafiles files to be added to XENGUEST_IMAGE_SRC_URI_XEN_FILES should
-# be performed via XENGUEST_IMAGE_SRC_URI_XEN_FILES_append.
+# be performed via XENGUEST_IMAGE_SRC_URI_XEN_FILES:append.
 # The kea-subnet4.json holds the kea dhcp4 subnet configuration for Dom0.
 # And it is used when XENGUEST_IMAGE_NETWORK_TYPE="nat".
 # Any customizations to it should be performed by replacing it

meta-arm-autonomy/recipes-extended/xenguest/xenguest-extern-guests.bb

@@ -67,7 +67,7 @@ do_install() {
 
 do_install[vardeps] += "ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUESTS"
 
-FILES_${PN} += "${XENGUEST_MANAGER_GUEST_DIR}"
+FILES:${PN} += "${XENGUEST_MANAGER_GUEST_DIR}"
 
 # In a multiconfig build this variable will hold a dependency string, which
 # differs based on whether the guest has initramfs or not.  It may have a space

meta-arm-autonomy/recipes-extended/xenguest/xenguest-manager.bb

@@ -56,8 +56,8 @@ do_install() {
 }
 
 # Things that we need on the target
-RDEPENDS_${PN} += "bash xenguest-mkimage lvm2 xen-tools parted e2fsprogs \
+RDEPENDS:${PN} += "bash xenguest-mkimage lvm2 xen-tools parted e2fsprogs \
                    dosfstools logrotate"
 
-FILES_${PN} += "${bindir}/xenguest-manager \
+FILES:${PN} += "${bindir}/xenguest-manager \
                ${sysconfdir}/xenguest"

meta-arm-autonomy/recipes-extended/xenguest/xenguest-mkimage.bb

@@ -31,6 +31,6 @@ do_install() {
 }
 
 # We need bash
-RDEPENDS_${PN} = "bash"
-FILES_${PN} = "${bindir}/xenguest-mkimage"
+RDEPENDS:${PN} = "bash"
+FILES:${PN} = "${bindir}/xenguest-mkimage"
 

meta-arm-autonomy/recipes-extended/xenguest/xenguest-network.bb

@@ -31,13 +31,13 @@ PACKAGES =+ "${PN}-kea-dhcp4"
 # Prefix with a_ to make sure it is executed in runlevel 01 before others
 # run start script before ifupdown and run stop script after ifupdown
 INITSCRIPT_PACKAGES = "${PN} ${PN}-kea-dhcp4"
-INITSCRIPT_NAME_${PN} = "a_xenguest-network-bridge"
-INITSCRIPT_PARAMS_${PN} = "start 01 2 3 4 5 . stop 81 0 1 6 ."
+INITSCRIPT_NAME:${PN} = "a_xenguest-network-bridge"
+INITSCRIPT_PARAMS:${PN} = "start 01 2 3 4 5 . stop 81 0 1 6 ."
 
 # Kea configuration needs to be restored before kea init scripts:
 # Kea dhcp4 server is 30, so lets use 20, to have higher priority
-INITSCRIPT_NAME_${PN}-kea-dhcp4 = "kea-restore-default-config"
-INITSCRIPT_PARAMS_${PN}-kea-dhcp4 = "defaults 20"
+INITSCRIPT_NAME:${PN}-kea-dhcp4 = "kea-restore-default-config"
+INITSCRIPT_PARAMS:${PN}-kea-dhcp4 = "defaults 20"
 
 inherit allarch update-rc.d
 
@@ -54,7 +54,7 @@ do_install() {
        > ${WORKDIR}/network-bridge.sh
     install -d -m 755 ${D}${sysconfdir}/init.d
     install -m 755 ${WORKDIR}/xenguest-network-bridge \
-        ${D}${sysconfdir}/init.d/${INITSCRIPT_NAME_${PN}}
+        ${D}${sysconfdir}/init.d/${INITSCRIPT_NAME:${PN}}
     install -d -m 755 ${D}${sysconfdir}/network/interfaces.d
     install -m 755 ${WORKDIR}/xenguest-network-bridge.cfg \
         ${D}${sysconfdir}/network/interfaces.d/.
@@ -77,7 +77,7 @@ do_install() {
         ${D}${sysconfdir}/kea/kea-dhcp4.conf.original
 }
 
-RDEPENDS_${PN} += "bridge-utils \
+RDEPENDS:${PN} += "bridge-utils \
                    iptables \
                    kea \
                    ${PN}-kea-dhcp4 \
@@ -87,10 +87,10 @@ RDEPENDS_${PN} += "bridge-utils \
                    kernel-module-xt-nat \
                    kernel-module-xt-masquerade \
                   "
-FILES_${PN} += "${sysconfdir}/network/interfaces.d/xenguest-network-bridge.cfg"
-FILES_${PN} += "${sysconfdir}/xenguest/init.pre/network-bridge.sh"
-FILES_${PN} += "${sysconfdir}/xen/scripts/vif-post.d/00-vif-xenguest.hook"
+FILES:${PN} += "${sysconfdir}/network/interfaces.d/xenguest-network-bridge.cfg"
+FILES:${PN} += "${sysconfdir}/xenguest/init.pre/network-bridge.sh"
+FILES:${PN} += "${sysconfdir}/xen/scripts/vif-post.d/00-vif-xenguest.hook"
 
-FILES_${PN}-kea-dhcp4 = "${sysconfdir}/kea/kea-dhcp4.conf.original"
-FILES_${PN}-kea-dhcp4 += "${sysconfdir}/init.d/${INITSCRIPT_NAME_${PN}-kea-dhcp4}"
-FILES_${PN}-kea-dhcp4 += "${sysconfdir}/xenguest/init.post/xenguest-network-init-post.sh"
+FILES:${PN}-kea-dhcp4 = "${sysconfdir}/kea/kea-dhcp4.conf.original"
+FILES:${PN}-kea-dhcp4 += "${sysconfdir}/init.d/${INITSCRIPT_NAME:${PN}-kea-dhcp4}"
+FILES:${PN}-kea-dhcp4 += "${sysconfdir}/xenguest/init.post/xenguest-network-init-post.sh"

meta-arm-autonomy/recipes-kernel/linux/linux-%.bbappend

@@ -1,3 +1,5 @@
 # Add arm-autonomy kernel support
-require linux-arm-autonomy.inc
-
+require ${@bb.utils.contains_any('DISTRO_FEATURES', \
+                                 'arm-autonomy-host arm-autonomy-guest', \
+                                 'linux-arm-autonomy.inc', \
+                                 '', d)}

meta-arm-autonomy/recipes-kernel/linux/linux-arm-autonomy.inc

@@ -1,11 +1,11 @@
 # Add arm-autonomy specific features to the kernel
 
-FILESEXTRAPATHS_prepend := "${THISDIR}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}:"
 
 #
 # arm-autonomy kmeta
 #
-SRC_URI_append = " file://arm-autonomy-kmeta;type=kmeta;name=arm-autonomy-kmeta;destsuffix=arm-autonomy-kmeta"
+SRC_URI:append = " file://arm-autonomy-kmeta;type=kmeta;name=arm-autonomy-kmeta;destsuffix=arm-autonomy-kmeta"
 
 # Add common Xen (host and guest) configs and patches
 KERNEL_FEATURES += "${@bb.utils.contains_any('DISTRO_FEATURES', \
@@ -27,8 +27,8 @@ KERNEL_FEATURES += "${@bb.utils.contains('DISTRO_FEATURES', \
 
 
 # Add support for arm64-autonomy-guest machine
-COMPATIBLE_MACHINE_arm64-autonomy-guest = "arm64-autonomy-guest"
-KMACHINE_arm64-autonomy-guest = "arm64-autonomy-guest"
+COMPATIBLE_MACHINE:arm64-autonomy-guest = "arm64-autonomy-guest"
+KMACHINE:arm64-autonomy-guest = "arm64-autonomy-guest"
 
 # Add Minimal Kernel Configs for Docker runtime
 KERNEL_FEATURES += "${@bb.utils.contains('DISTRO_FEATURES', \

meta-arm-bsp/classes/image_types_disk_img.bbclass

@@ -1,155 +0,0 @@
-# Defines the disk.img image type
-
-#
-# Add an image type 'disk.img' which creates a disk image
-# with up to 4 partitions
-#
-# For partition 1 (replace 1 by 2 for partition 2, and so on for 3 and 4):
-#
-# * DISK_IMG_PARTITION1_SIZE is the partition size in MB (1024 is 1 GB)
-#
-# * DISK_IMG_PARTITION1_FSTYPE is the file system to format the partition with.
-#   We support only ext files systems (ext2, ext3 and ext4)
-#   If this is empty, the partition will not be formated.
-#
-# * DISK_IMG_PARTITION1_CONTENT is the content to put in the filesystem.
-#   Only 'rootfs' is supported and will create a partition with the Yocto
-#   root filesystem.
-#
-
-# Default values for partition 1
-DISK_IMG_PARTITION1_SIZE ??= "2048"
-DISK_IMG_PARTITION1_FSTYPE ??= "ext4"
-DISK_IMG_PARTITION1_CONTENT ??= "rootfs"
-
-# Default values for partition 2
-DISK_IMG_PARTITION2_SIZE ??= "0"
-DISK_IMG_PARTITION2_FSTYPE ??= "ext2"
-DISK_IMG_PARTITION2_CONTENT ??= ""
-
-# Default values for partition 3
-DISK_IMG_PARTITION3_SIZE ??= "0"
-DISK_IMG_PARTITION3_FSTYPE ??= "ext4"
-DISK_IMG_PARTITION3_CONTENT ??= ""
-
-# Default values for partition 4
-DISK_IMG_PARTITION4_SIZE ??= "0"
-DISK_IMG_PARTITION4_FSTYPE ??= "ext4"
-DISK_IMG_PARTITION4_CONTENT ??= ""
-
-# Default disk sector size
-DISK_IMG_SECTOR_SIZE ??= "512"
-
-# We need mkfs.ext and parted tools to create our image (dd is always there)
-do_image_disk_img[depends] += "e2fsprogs-native:do_populate_sysroot \
-    parted-native:do_populate_sysroot"
-
-DISK_IMG_FILE = "${IMGDEPLOYDIR}/${IMAGE_NAME}${IMAGE_NAME_SUFFIX}.disk.img"
-
-# Create one disk partition
-disk_img_createpart() {
-    local imagefile="$1"
-    local start="$2"
-    local size="$3"
-    local fstype="${4:-}"
-    local content="${5:-}"
-    local formatargs=""
-
-    set -x
-
-    rm -f $imagefile
-
-    # Create the partition image
-    dd if=/dev/zero of=$imagefile bs=${DISK_IMG_SECTOR_SIZE} count=0 \
-        seek=$(expr $size / ${DISK_IMG_SECTOR_SIZE})
-
-    if [ -n "$fstype" ]; then
-        case $content in
-            rootfs)
-                formatargs=" -d ${IMAGE_ROOTFS}"
-                ;;
-            boot)
-                echo "Unsupported"
-                exit 1
-                ;;
-            *)
-        esac
-
-        # Create the file system (with content if needed)
-        mkfs.$fstype -F $imagefile $formatargs
-    fi
-
-    cat $imagefile >> ${DISK_IMG_FILE}
-
-    # Add the partition to the partition table
-    parted -s ${DISK_IMG_FILE} unit B mkpart primary $start \
-        $(expr $start + $realsize - 1)
-}
-
-disk_img_create () {
-    local currpos
-    local realsize
-
-    set -x
-
-    currpos=${DISK_IMG_SECTOR_SIZE}
-
-    # Create reserved part for partition table (1MB)
-    dd if=/dev/zero of=${DISK_IMG_FILE} bs=${DISK_IMG_SECTOR_SIZE} count=0 \
-        seek=1
-
-    parted -s ${DISK_IMG_FILE} mklabel msdos
-
-    if [ ${DISK_IMG_PARTITION1_SIZE} -ne 0 ]; then
-
-        # Reduce the first block size of one sector to make space
-        # for the partition table
-        realsize=$(expr ${DISK_IMG_PARTITION1_SIZE} \* 1024 \* 1024 \
-            - ${DISK_IMG_SECTOR_SIZE})
-
-        # Create the partition
-        disk_img_createpart ${WORKDIR}/part1.img $currpos $realsize \
-            "${DISK_IMG_PARTITION1_FSTYPE}" "${DISK_IMG_PARTITION1_CONTENT}"
-
-        currpos=$(expr $currpos + $realsize)
-    fi
-
-    if [ ${DISK_IMG_PARTITION2_SIZE} -ne 0 ]; then
-        # Partition size
-        realsize=$(expr ${DISK_IMG_PARTITION2_SIZE} \* 1024 \* 1024)
-
-        # Create the partition
-        disk_img_createpart ${WORKDIR}/part2.img $currpos $realsize \
-            "${DISK_IMG_PARTITION2_FSTYPE}" "${DISK_IMG_PARTITION2_CONTENT}"
-
-        currpos=$(expr $currpos + $realsize)
-
-    fi
-
-    if [ ${DISK_IMG_PARTITION3_SIZE} -ne 0 ]; then
-        # Partition size
-        realsize=$(expr ${DISK_IMG_PARTITION3_SIZE} \* 1024 \* 1024)
-
-        # Create the partition
-        disk_img_createpart ${WORKDIR}/part3.img $currpos $realsize \
-            "${DISK_IMG_PARTITION3_FSTYPE}" "${DISK_IMG_PARTITION3_CONTENT}"
-
-        currpos=$(expr $currpos + $realsize)
-
-    fi
-    if [ ${DISK_IMG_PARTITION4_SIZE} -ne 0 ]; then
-        # Partition size
-        realsize=$(expr ${DISK_IMG_PARTITION4_SIZE} \* 1024 \* 1024)
-
-        # Create the partition
-        disk_img_createpart ${WORKDIR}/part4.img $currpos $realsize \
-            "${DISK_IMG_PARTITION4_FSTYPE}" "${DISK_IMG_PARTITION4_CONTENT}"
-
-        currpos=$(expr $currpos + $realsize)
-
-    fi
-}
-
-IMAGE_CMD_disk.img = "disk_img_create"
-IMAGE_TYPES += "disk.img"
-

meta-arm-bsp/conf/layer.conf

@@ -9,12 +9,12 @@ BBFILE_COLLECTIONS += "meta-arm-bsp"
 BBFILE_PATTERN_meta-arm-bsp = "^${LAYERDIR}/"
 BBFILE_PRIORITY_meta-arm-bsp = "5"
 
-LAYERSERIES_COMPAT_meta-arm-bsp = "hardknott"
+LAYERSERIES_COMPAT_meta-arm-bsp = "honister"
 
 LAYERDEPENDS_meta-arm-bsp = "core meta-arm"
 # This won't be used by layerindex-fetch, but works everywhere else
-LAYERDEPENDS_meta-arm-bsp_append_musca-b1 = " meta-python"
-LAYERDEPENDS_meta-arm-bsp_append_musca-s1 = " meta-python"
+LAYERDEPENDS_meta-arm-bsp:append:musca-b1 = " meta-python"
+LAYERDEPENDS_meta-arm-bsp:append:musca-s1 = " meta-python"
 
 # Additional license directories.
 LICENSE_PATH += "${LAYERDIR}/custom-licenses"

meta-arm-bsp/conf/machine/corstone500.conf

@@ -2,9 +2,8 @@
 #@NAME: Corstone-500 machine
 #@DESCRIPTION: Machine configuration for the Corstone-500 platform
 
-require conf/machine/include/tune-cortexa5.inc
+require conf/machine/include/arm/armv7a/tune-cortexa5.inc
 
-#
 # Corstone-500 is built against poky-tiny distro.
 # poky-tiny sets PREFERRED_PROVIDER_virtual/kernel to linux-yocto-tiny.
 # Since distro config is evaluated after the machine config, we need to
@@ -12,12 +11,10 @@ require conf/machine/include/tune-cortexa5.inc
 # PREFERRED_PROVIDER_virtual/kernel specified in the machine config will
 # apply.
 #
-PREFERRED_PROVIDER_virtual/kernel_forcevariable = "linux-yocto"
+PREFERRED_PROVIDER_virtual/kernel:forcevariable = "linux-yocto"
 PREFERRED_VERSION_linux-yocto ?= "5.3%"
-KBUILD_DEFCONFIG = "multi_v7_defconfig"
-KCONFIG_MODE = "--alldefconfig"
 
-PREFERRED_VERSION_trusted-firmware-a ?= "2.4%"
+PREFERRED_VERSION_trusted-firmware-a ?= "2.5%"
 
 EXTRA_IMAGEDEPENDS += "virtual/trusted-firmware-a u-boot"
 
@@ -29,4 +26,4 @@ IMAGE_FSTYPES += "tar.bz2 cpio.gz"
 UBOOT_MACHINE = "designstart_ca5_defconfig"
 UBOOT_IMAGE_ENTRYPOINT = "0x84000000"
 UBOOT_IMAGE_LOADADDRESS = "0x84000000"
-PREFERRED_VERSION_u-boot ?= "2020.07"
+PREFERRED_VERSION_u-boot ?= "2020.07"

meta-arm-bsp/conf/machine/corstone700-fvp.conf

@@ -6,7 +6,7 @@ require conf/machine/include/corstone700.inc
 
 # default feature used: eth_lan91c111
 # add the following line to local.conf to disable the feature:
-# MACHINE_FEATURES_remove = "eth_lan91c111"
+# MACHINE_FEATURES:remove = "eth_lan91c111"
 MACHINE_FEATURES += "eth_lan91c111"
 
 TFA_TARGET_PLATFORM = "fvp"

meta-arm-bsp/conf/machine/corstone700-mps3.conf

@@ -6,12 +6,12 @@ require conf/machine/include/corstone700.inc
 
 # default feature used: eth_lan9115
 # add the following line to local.conf to disable the feature:
-# MACHINE_FEATURES_remove = "eth_lan9115"
+# MACHINE_FEATURES:remove = "eth_lan9115"
 MACHINE_FEATURES += "eth_lan9115"
 
 # default feature used: usb_host
 # add the following line to local.conf to disable the feature:
-# MACHINE_FEATURES_remove = "usb_host"
+# MACHINE_FEATURES:remove = "usb_host"
 MACHINE_FEATURES += "usb_host"
 
 TFA_TARGET_PLATFORM = "fpga"

meta-arm-bsp/conf/machine/fvp-base.conf

@@ -14,16 +14,19 @@ UBOOT_MACHINE = "vexpress_aemv8a_semi_defconfig"
 
 KERNEL_IMAGETYPE = "Image"
 
-KERNEL_DEVICETREE = "arm/fvp-base-gicv3-psci-custom.dtb"
+KERNEL_DEVICETREE = "arm/fvp-base-revc.dtb"
 
 FVP_PROVIDER ?= "fvp-base-a-aem-native"
 FVP_EXE ?= "FVP_Base_RevC-2xAEMvA"
+FVP_CONFIG[bp.ve_sysregs.exit_on_shutdown] ?= "1"
+FVP_CONFIG[bp.virtio_net.enabled] ?= "1"
+FVP_CONFIG[bp.virtio_net.hostbridge.userNetworking] ?= "1"
 FVP_CONFIG[cache_state_modelled] ?= "0"
 FVP_CONFIG[bp.secureflashloader.fname] ?= "${DEPLOY_DIR_IMAGE}/bl1-fvp.bin"
 FVP_CONFIG[bp.flashloader0.fname] ?= "${DEPLOY_DIR_IMAGE}/fip-fvp.bin"
 FVP_CONFIG[bp.virtioblockdevice.image_path] ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.wic"
 FVP_DATA ?= "cluster0.cpu0=${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}@0x80080000 \
-            cluster0.cpu0=${DEPLOY_DIR_IMAGE}/fvp-base-gicv3-psci-custom.dtb@0x83000000"
+            cluster0.cpu0=${DEPLOY_DIR_IMAGE}/fvp-base-revc.dtb@0x83000000"
 FVP_CONSOLE ?= "terminal_0"
 FVP_TERMINALS[bp.terminal_0] ?= "Console"
 FVP_TERMINALS[bp.terminal_1] ?= ""

meta-arm-bsp/conf/machine/fvp-baser-aemv8r64.conf

@@ -9,7 +9,8 @@ require conf/machine/include/arm/armv8r/arch-armv8r64.inc
 EXTRA_IMAGEDEPENDS += "boot-wrapper-aarch64"
 
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
-PREFERRED_VERSION_linux-yocto ?= "5.10%"
+PREFERRED_VERSION_linux-yocto ?= "5.14%"
+PREFERRED_VERSION_linux-yocto-rt ?= "5.14%"
 
 KERNEL_IMAGETYPE = "Image"
 KERNEL_DEVICETREE = "arm/fvp-baser-aemv8r64.dtb"
@@ -17,10 +18,44 @@ KERNEL_DEVICETREE = "arm/fvp-baser-aemv8r64.dtb"
 SERIAL_CONSOLES = "115200;ttyAMA0"
 
 IMAGE_FSTYPES += "wic"
-WKS_FILE ?= "${MACHINE}.wks"
+WKS_FILE ?= "fvp-base.wks"
 
 # As this is a virtual target that will not be used in the real world there is
 # no need for real SSH keys.  Disable rng-tools (which takes too long to
 # initialise) and install the pre-generated keys.
-PACKAGECONFIG_remove_pn-openssh = "rng-tools"
+PACKAGECONFIG:remove:pn-openssh = "rng-tools"
 MACHINE_EXTRA_RRECOMMENDS += "ssh-pregen-hostkeys"
+
+FVP_EXTRA_ARGS = "-a cluster0*=${DEPLOY_DIR_IMAGE}/linux-system.axf"
+FVP_PROVIDER ?= "fvp-base-r-aem-native"
+FVP_EXE ?= "FVP_BaseR_AEMv8R"
+FVP_CONSOLE ?= "terminal_0"
+
+# FVP parameters
+FVP_CONFIG[bp.virtioblockdevice.image_path] ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.wic"
+FVP_CONFIG[bp.dram_metadata.init_value] ?= "0"
+FVP_CONFIG[bp.dram_metadata.is_enabled] ?= "true"
+FVP_CONFIG[bp.dram_size] ?= "8"
+FVP_CONFIG[bp.exclusive_monitor.monitor_access_level] ?= "1"
+FVP_CONFIG[bp.pl011_uart0.unbuffered_output] ?= "1"
+FVP_CONFIG[bp.pl011_uart0.untimed_fifos] ?= "true"
+FVP_CONFIG[bp.refcounter.non_arch_start_at_default] ?= "1"
+FVP_CONFIG[bp.smsc_91c111.enabled] ?= "0"
+FVP_CONFIG[bp.ve_sysregs.mmbSiteDefault] ?= "0"
+FVP_CONFIG[cache_state_modelled] ?= "0"
+FVP_CONFIG[cluster0.gicv3.cpuintf-mmap-access-level] ?= "2"
+FVP_CONFIG[cluster0.gicv3.SRE-enable-action-on-mmap] ?= "2"
+FVP_CONFIG[cluster0.gicv3.SRE-EL2-enable-RAO] ?= "1"
+FVP_CONFIG[cluster0.gicv3.extended-interrupt-range-support] ?= "1"
+FVP_CONFIG[cluster0.has_aarch64] ?= "1"
+FVP_CONFIG[cluster0.NUM_CORES] ?= "4"
+FVP_CONFIG[cluster0.stage12_tlb_size] ?= "512"
+FVP_CONFIG[gic_distributor.GICD_CTLR-DS-1-means-secure-only] ?= "1"
+FVP_CONFIG[gic_distributor.GITS_BASER0-type] ?= "1"
+FVP_CONFIG[gic_distributor.ITS-count] ?= "1"
+FVP_CONFIG[gic_distributor.ITS-hardware-collection-count] ?= "1"
+FVP_CONFIG[gic_distributor.has-two-security-states] ?= "0"
+FVP_CONFIG[pctl.startup] ?= "0.0.0.*"
+FVP_CONFIG[bp.virtio_net.enabled] ?= "1"
+FVP_CONFIG[bp.virtio_net.hostbridge.userNetworking] ?= "1"
+FVP_CONFIG[bp.vis.rate_limit-enable] ?= "0"

meta-arm-bsp/conf/machine/fvp-common.inc

@@ -7,39 +7,23 @@
 
 MACHINE_FEATURES = "optee"
 
-IMAGE_CLASSES += "image_types_disk_img"
-IMAGE_FSTYPES += "disk.img wic"
-
+IMAGE_FSTYPES += "wic"
 WKS_FILE ?= "fvp-base.wks"
 
-# Disk image configuration
-# We don't use the first partition
-DISK_IMG_PARTITION1_SIZE = "128"
-DISK_IMG_PARTITION1_FSTYPE = ""
-DISK_IMG_PARTITION1_CONTENT = ""
-
-# Second partition is used for rootfs
-DISK_IMG_PARTITION2_SIZE = "2048"
-DISK_IMG_PARTITION2_FSTYPE = "ext4"
-DISK_IMG_PARTITION2_CONTENT = "rootfs"
-
-# Empty third partition (8G - 2048M - 128M)
-DISK_IMG_PARTITION3_SIZE = "6016"
-DISK_IMG_PARTITION3_FSTYPE = ""
-DISK_IMG_PARTITION3_CONTENT = ""
-
 SERIAL_CONSOLES = "115200;ttyAMA0"
 
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
 PREFERRED_VERSION_linux-yocto ?= "5.10%"
 
-PREFERRED_VERSION_u-boot ?= "2021.01"
-PREFERRED_VERSION_trusted-firmware-a ?= "2.4%"
+PREFERRED_VERSION_u-boot ?= "2021.07"
+PREFERRED_VERSION_trusted-firmware-a ?= "2.5%"
 
 EXTRA_IMAGEDEPENDS += "virtual/trusted-firmware-a u-boot"
 
 # As this is a virtual target that will not be used in the real world there is
 # no need for real SSH keys.  Disable rng-tools (which takes too long to
 # initialise) and install the pre-generated keys.
-PACKAGECONFIG_remove_pn-openssh = "rng-tools"
+PACKAGECONFIG:remove:pn-openssh = "rng-tools"
 MACHINE_EXTRA_RRECOMMENDS += "ssh-pregen-hostkeys"
+
+TEST_TARGET = "OEFVPTarget"

meta-arm-bsp/conf/machine/include/arm/arch-armv6m.inc

@@ -1,19 +0,0 @@
-# Tuning for ARMV6-m defined in ARM v6-M ArchitectureReference Manual
-# at https://static.docs.arm.com/ddi0419/d/DDI0419D_armv6m_arm.pdf
-DEFAULTTUNE ?= "armv6m"
-
-TUNEVALID[armv6m] = "Enable instructions for ARMv6-m"
-TUNECONFLICTS[armv6m] = "armv4 armv5 armv6 armv7a"
-
-# Use armv6s-m instead of armv6-m to avoid gcc bug "SVC is not permitted on this architecture".
-# SVC is a valid instruction.
-TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'armv6m', ' -march=armv6s-m', '', d)}"
-MACHINEOVERRIDES =. "${@bb.utils.contains('TUNE_FEATURES', 'armv6m', 'armv6m:', '', d)}"
-
-require conf/machine/include/arm/arch-armv5.inc
-
-# Little Endian
-AVAILTUNES += "armv6m"
-ARMPKGARCH_tune-armv6m             = "armv6m"
-TUNE_FEATURES_tune-armv6m          = "armv6m"
-PACKAGE_EXTRA_ARCHS_tune-armv6m    = "armv6m"

meta-arm-bsp/conf/machine/include/arm/arch-armv7em.inc

@@ -1,17 +0,0 @@
-#
-# Defaults for ARMv7e-m
-#
-DEFAULTTUNE ?= "armv7em"
-
-TUNEVALID[armv7em] = "Enable instructions for ARMv7e-m"
-TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'armv7em', ' -march=armv7e-m', '', d)}"
-MACHINEOVERRIDES =. "${@bb.utils.contains('TUNE_FEATURES', 'armv7em', 'armv7em:', '', d)}"
-
-TUNECONFLICTS[armv7em] = "armv4 armv5 armv6 armv7a"
-
-require conf/machine/include/arm/arch-armv7m.inc
-
-AVAILTUNES                            += "armv7em"
-ARMPKGARCH_tune-armv7em                = "armv7em"
-TUNE_FEATURES_tune-armv7em             = "armv7em"
-PACKAGE_EXTRA_ARCHS_tune-armv7em       = "armv7em"

meta-arm-bsp/conf/machine/include/arm/arch-armv7m.inc

@@ -1,17 +0,0 @@
-#
-# Defaults for ARMv7-m
-#
-DEFAULTTUNE ?= "armv7m"
-
-TUNEVALID[armv7m] = "Enable instructions for ARMv7-m"
-TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'armv7m', ' -march=armv7-m', '', d)}"
-MACHINEOVERRIDES =. "${@bb.utils.contains('TUNE_FEATURES', 'armv7m', 'armv7m:', '', d)}"
-
-TUNECONFLICTS[armv7m] = "armv4 armv5 armv6 armv7a"
-
-require conf/machine/include/arm/arch-armv6m.inc
-
-AVAILTUNES                            += "armv7m"
-ARMPKGARCH_tune-armv7m                 = "armv7m"
-TUNE_FEATURES_tune-armv7m              = "armv7m"
-PACKAGE_EXTRA_ARCHS_tune-armv7m        = "armv7m"

meta-arm-bsp/conf/machine/include/arm/arch-armv8-1m-main.inc

@@ -1,18 +0,0 @@
-#
-#
-# Defaults for ARMv8.1-M.main
-#
-DEFAULTTUNE ?= "armv8-1m-main"
-
-TUNEVALID[armv8-1m-main] = "Enable instructions for ARMv8.1-m.main"
-TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'armv8-1m-main', ' -march=armv8.1-m.main', '', d)}"
-MACHINEOVERRIDES =. "${@bb.utils.contains('TUNE_FEATURES', 'armv8-1m-main', 'armv8-1m-main:', '', d)}"
-
-TUNECONFLICTS[armv8-1m-main] = "armv4 armv5 armv6 armv7a"
-
-require conf/machine/include/arm/arch-armv8m-main.inc
-
-AVAILTUNES                            += "armv8-1m-main"
-ARMPKGARCH_tune-armv8-1m-main          = "armv8-1m-main"
-TUNE_FEATURES_tune-armv8-1m-main       = "armv8-1m-main"
-PACKAGE_EXTRA_ARCHS_tune-armv8-1m-main = "armv8-1m-main"

meta-arm-bsp/conf/machine/include/arm/arch-armv8-2a.inc

@@ -1,18 +0,0 @@
-DEFAULTTUNE ?= "armv8-2a"
-
-TUNEVALID[armv8-2a] = "Enable instructions for ARMv8-a"
-TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'armv8-2a', ' -march=armv8.2-a', '', d)}"
-# TUNE crypto will be handled by arch-armv8a.inc below
-MACHINEOVERRIDES =. "${@bb.utils.contains('TUNE_FEATURES', 'armv8-2a', 'armv8-2a:', '', d)}"
-
-require conf/machine/include/arm/arch-armv8a.inc
-
-AVAILTUNES += "armv8-2a armv8-2a-crypto"
-ARMPKGARCH_tune-armv8-2a                    ?= "armv8-2a"
-ARMPKGARCH_tune-armv8-2a-crypto             ?= "armv8-2a"
-TUNE_FEATURES_tune-armv8-2a                  = "aarch64 armv8-2a"
-TUNE_FEATURES_tune-armv8-2a-crypto           = "${TUNE_FEATURES_tune-armv8-2a} crypto"
-PACKAGE_EXTRA_ARCHS_tune-armv8-2a            = "${PACKAGE_EXTRA_ARCHS_tune-armv8a} armv8-2a"
-PACKAGE_EXTRA_ARCHS_tune-armv8-2a-crypto     = "${PACKAGE_EXTRA_ARCHS_tune-armv8-2a} armv8-2a-crypto"
-BASE_LIB_tune-armv8-2a                       = "lib64"
-BASE_LIB_tune-armv8-2a-crypto                = "lib64"

meta-arm-bsp/conf/machine/include/arm/arch-armv8-4a.inc

@@ -1,19 +0,0 @@
-DEFAULTTUNE ?= "armv8-4a"
-
-TUNEVALID[armv8-4a] = "Enable instructions for ARMv8.4-a"
-TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'armv8-4a', ' -march=armv8.4-a', '', d)}"
-# TUNE crypto will be handled by arch-armv8a.inc below
-MACHINEOVERRIDES =. "${@bb.utils.contains('TUNE_FEATURES', 'armv8-4a', 'armv8-4a:', '', d)}"
-
-require conf/machine/include/arm/arch-armv8a.inc
-
-# Little Endian base configs
-AVAILTUNES += "armv8-4a armv8-4a-crypto"
-ARMPKGARCH_tune-armv8-4a                    ?= "armv8-4a"
-ARMPKGARCH_tune-armv8-4a-crypto             ?= "armv8-4a"
-TUNE_FEATURES_tune-armv8-4a                  = "aarch64 armv8-4a"
-TUNE_FEATURES_tune-armv8-4a-crypto           = "${TUNE_FEATURES_tune-armv8-4a} crypto"
-PACKAGE_EXTRA_ARCHS_tune-armv8-4a            = "${PACKAGE_EXTRA_ARCHS_tune-armv8a} armv8-4a"
-PACKAGE_EXTRA_ARCHS_tune-armv8-4a-crypto     = "${PACKAGE_EXTRA_ARCHS_tune-armv8-4a} armv8-4a-crypto"
-BASE_LIB_tune-armv8-4a                       = "lib64"
-BASE_LIB_tune-armv8-4a-crypto                = "lib64"

meta-arm-bsp/conf/machine/include/arm/arch-armv8m-base.inc

@@ -1,17 +0,0 @@
-#
-# Defaults for ARMv8-m.base
-#
-DEFAULTTUNE ?= "armv8m-base"
-
-TUNEVALID[armv8m-base] = "Enable instructions for ARMv8-m.base"
-TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'armv8m-base', ' -march=armv8-m.base', '', d)}"
-MACHINEOVERRIDES =. "${@bb.utils.contains('TUNE_FEATURES', 'armv8m-base', 'armv8m-base:', '', d)}"
-
-TUNECONFLICTS[armv8m-base] = "armv4 armv5 armv6 armv7a"
-
-require conf/machine/include/arm/arch-armv7m.inc
-
-AVAILTUNES                          += "armv8m-base"
-ARMPKGARCH_tune-armv8m-base          = "armv8m-base"
-TUNE_FEATURES_tune-armv8m-base       = "armv8m-base"
-PACKAGE_EXTRA_ARCHS_tune-armv8m-base = "armv8m-base"

meta-arm-bsp/conf/machine/include/arm/arch-armv8m-main.inc

@@ -1,36 +0,0 @@
-#
-# Defaults for ARMv8-m.main
-#
-DEFAULTTUNE ?= "armv8m-main"
-
-require conf/machine/include/arm/arch-armv8m-base.inc
-
-TUNEVALID[armv8m-main] = "Enable instructions for ARMv8-m.main"
-TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'armv8m-main', ' -march=armv8-m.main${MARCH_DSP}${MARCH_FPU}', '', d)}"
-MACHINEOVERRIDES =. "${@bb.utils.contains('TUNE_FEATURES', 'armv8m-main', 'armv8m-main:', '', d)}"
-
-TUNECONFLICTS[armv8m-main] = "armv4 armv5 armv6 armv7a"
-
-# FIXME - below taken from meta/conf/machine/include/arm/arch-armv5-dsp.inc and should be put into something more generic
-TUNEVALID[dsp] = "ARM DSP functionality"
-ARMPKGSFX_DSP = "${@bb.utils.contains('TUNE_FEATURES', [ 'dsp' ], 'e', '', d)}"
-MARCH_DSP = "${@bb.utils.contains('TUNE_FEATURES', [ 'dsp' ], '+dsp', '+nodsp', d)}"
-
-# FIXME - Below belongs in meta/conf/machine/include/arm/feature-arm-neon.inc
-TUNEVALID[vfpv5spd16] = "Enable Vector Floating Point Version 5, Single Precision. with 16 registers (fpv5-sp-d16) unit."
-TUNE_CCARGS_MFPU .= "${@bb.utils.contains('TUNE_FEATURES', 'vfpv5spd16', 'fpv5-sp-d16', '', d)}"
-MARCH_FPU = "${@bb.utils.contains('TUNE_FEATURES', [ 'vfpv5spd16' ], '+fp', '+nofp', d)}"
-
-AVAILTUNES                                      += "armv8m-main armv8m-mainearmv8m-main-vfpv5spd16 armv8m-maine-vfpv5spd16"
-ARMPKGARCH_tune-armv8m-main                      = "armv8m-main"
-ARMPKGARCH_tune-armv8m-maine                     = "armv8m-main"
-ARMPKGARCH_tune-armv8m-main-vfpv5spd16           = "armv8m-main"
-ARMPKGARCH_tune-armv8m-maine-vfpv5spd16          = "armv8m-main"
-TUNE_FEATURES_tune-armv8m-main                   = "armv8m-main"
-TUNE_FEATURES_tune-armv8m-maine                  = "${TUNE_FEATURES_tune-armv8m-main} dsp"
-TUNE_FEATURES_tune-armv8m-main-vfpv5spd16        = "${TUNE_FEATURES_tune-armv8m-main} vfpv5spd16"
-TUNE_FEATURES_tune-armv8m-maine-vfpv5spd16       = "${TUNE_FEATURES_tune-armv8m-main-vfpv5spd16} dsp"
-PACKAGE_EXTRA_ARCHS_tune-armv8m-main             = "armv8m-main"
-PACKAGE_EXTRA_ARCHS_tune-armv8m-maine            = "${PACKAGE_EXTRA_ARCHS_tune-armv8m-main} armv8m-maine"
-PACKAGE_EXTRA_ARCHS_tune-armv8m-main-vfpv5spd16  = "${PACKAGE_EXTRA_ARCHS_tune-armv8m-main} armv8m-main-fpv5-spd16"
-PACKAGE_EXTRA_ARCHS_tune-armv8m-maine-vfpv5spd16 = "${PACKAGE_EXTRA_ARCHS_tune-armv8m-main} armv8m-maine-fpv5-spd16"

meta-arm-bsp/conf/machine/include/arm/armv8r/arch-armv8r64.inc

@@ -1,4 +1,10 @@
-# We are temporarily using armv8-4a until GCC 11 is released and supported by
-# oe-core which will include the armv8-r support for aarch64.
+require conf/machine/include/arm/arch-armv8r.inc
 
-require conf/machine/include/arm/arch-armv8-4a.inc
+TUNE_FEATURES:tune-armv8r            =+ "aarch64"
+PACKAGE_EXTRA_ARCHS:tune-armv8r      =+ "aarch64"
+BASE_LIB:tune-armv8r                 = "lib64"
+BASE_LIB:tune-armv8r-crc             = "lib64"
+BASE_LIB:tune-armv8r-crypto          = "lib64"
+BASE_LIB:tune-armv8r-simd            = "lib64"
+BASE_LIB:tune-armv8r-crc-simd        = "lib64"
+BASE_LIB:tune-armv8r-crc-crypto-simd = "lib64"

meta-arm-bsp/conf/machine/include/corstone700.inc

@@ -1,6 +1,6 @@
 # Common configuration for all Corstone700 machines
 
-require conf/machine/include/tune-cortexa32.inc
+require conf/machine/include/arm/armv8a/tune-cortexa32.inc
 
 MACHINEOVERRIDES =. "corstone700:"
 
@@ -8,10 +8,12 @@ TFA_PLATFORM = "corstone700"
 
 SERIAL_CONSOLES ?= "115200;ttyAMA0"
 
-PREFERRED_PROVIDER_virtual/kernel_corstone700 = "linux-yocto"
+PREFERRED_PROVIDER_virtual/kernel = "linux-yocto"
 PREFERRED_VERSION_linux-yocto ?= "5.6%"
 
-PREFERRED_VERSION_trusted-firmware-a ?= "2.4%"
+PREFERRED_VERSION_trusted-firmware-a ?= "2.5%"
+
+PREFERRED_VERSION_gcc-arm-none-eabi-native ?= "9-2020-q2-update"
 
 PREFERRED_PROVIDER_virtual/control-processor-firmware ?= "boot-firmware"
 
@@ -22,11 +24,11 @@ EXTRA_IMAGEDEPENDS += " \
                       virtual/control-processor-firmware  \
                       "
 
-WKS_FILE_DEPENDS_append = " ${EXTRA_IMAGEDEPENDS}"
+WKS_FILE_DEPENDS:append = " ${EXTRA_IMAGEDEPENDS}"
 
 WKS_FILE ?= "arm-reference-image.corstone700.wks"
 
 VIRTUAL-RUNTIME_dev_manager = "busybox-mdev"
 
 UBOOT_MACHINE ?= "corstone700_defconfig"
-PREFERRED_VERSION_u-boot ?= "2020.04"
+PREFERRED_VERSION_u-boot ?= "2020.04"