ci: make get-binary-toolchain run per build

In a distributed, non-homogeneous CI setup, the binary-toolchain setup
script might not run on the machine that needs the toolchains.  Make
this per-build and it will always be there, at the expense of running on
builds that might not need it (though it still should be fast).

Also, there is an issue with the directory where the binary toolchain is
located being global, and racing against other systems using, setting up,
and tearing down.  Link this to a local directory to avoid any races.

Signed-off-by: Jon Mason <jon.mason@arm.com>

.gitlab-ci.yml

@@ -0,0 +1,193 @@
+# We need 2.6.3 as this is the latest container with an old enough distro
+image: ghcr.io/siemens/kas/kas:2.6.3
+
+  # First do a common bootstrap, and then build all the targets
+stages:
+  - prep
+  - bootstrap
+  - build
+
+# Common job fragment to get a worker ready
+.setup:
+  stage: build
+  interruptible: true
+  variables:
+    KAS_WORK_DIR: $CI_PROJECT_DIR/work
+    KAS_REPO_REF_DIR: $CI_BUILDS_DIR/persist/repos
+    SSTATE_DIR: $CI_BUILDS_DIR/persist/sstate
+    DL_DIR: $CI_BUILDS_DIR/persist/downloads
+    BB_LOGCONFIG: $CI_PROJECT_DIR/ci/logging.yml
+    TOOLCHAIN_DIR: $CI_BUILDS_DIR/persist/toolchains
+    IMAGE_DIR: $CI_PROJECT_DIR/work/build/tmp/deploy/images
+    TOOLCHAIN_LINK_DIR: $CI_PROJECT_DIR/work/build/toolchains
+  before_script:
+    - echo KAS_WORK_DIR = $KAS_WORK_DIR
+    - echo SSTATE_DIR = $SSTATE_DIR
+    - echo DL_DIR = $DL_DIR
+    - rm -rf $KAS_WORK_DIR
+    - mkdir --verbose --parents $KAS_WORK_DIR $KAS_REPO_REF_DIR $SSTATE_DIR $DL_DIR $TOOLCHAIN_DIR $TOOLCHAIN_LINK_DIR
+    # Must do this here, as it's the only way to make sure the toolchain is installed on the same builder
+    - ./ci/get-binary-toolchains $DL_DIR $TOOLCHAIN_DIR $TOOLCHAIN_LINK_DIR
+
+# Generalised fragment to do a Kas build
+.build:
+  extends: .setup
+  script:
+    - KASFILES=$(./ci/jobs-to-kas $CI_JOB_NAME)
+    - kas shell --update --force-checkout $KASFILES -c 'cat conf/*.conf'
+    - kas build $KASFILES
+    - ./ci/check-warnings $KAS_WORK_DIR/build/warnings.log
+
+#
+# Prep stage, update repositories once
+#
+update-repos:
+  extends: .setup
+  stage: prep
+  script:
+  - flock --verbose --timeout 60 $KAS_REPO_REF_DIR ./ci/update-repos
+
+#
+# Bootstrap stage, bootstrap and machine coverage
+#
+
+# Build a number of native tools first to ensure the other builders don't race
+# over them
+n1sdp/bootstrap:
+  extends: .build
+  stage: bootstrap
+
+# What percentage of machines in the layer do we build
+machine-coverage:
+  stage: bootstrap
+  interruptible: true
+  script:
+  - ./ci/check-machine-coverage
+  coverage: '/Coverage: \d+/'
+
+
+#
+# Build stage, the actual build jobs
+#
+
+a5ds:
+  extends: .build
+
+corstone700-fvp:
+  extends: .build
+
+corstone700-mps3:
+  extends: .build
+
+foundation-armv8:
+  extends: .build
+
+fvp-base:
+  extends: .build
+
+fvp-base-arm32:
+  extends: .build
+
+fvp-base-arm32/external-gccarm:
+  extends: .build
+
+gem5-arm64:
+  extends: .build
+
+juno:
+  extends: .build
+
+juno/clang:
+  extends: .build
+
+musca-b1:
+  extends: .build
+
+musca-s1:
+  extends: .build
+
+n1sdp:
+  extends: .build
+
+# This job currently fails when building gcc-runtime:
+# cc1: error: switch '-mcpu=armv8.2-a' conflicts with '-march=armv8-a' switch [-Werror]
+# Mark as manual so it doesn't get executed automatically
+n1sdp/armgcc:
+  extends: .build
+  when: manual
+
+qemuarm/testimage:
+  extends: .build
+
+qemuarm64-secureboot/testimage:
+  extends: .build
+
+qemuarm64-secureboot/clang/testimage:
+  extends: .build
+
+qemuarm64-secureboot/clang/musl/testimage:
+  extends: .build
+
+qemuarm64-secureboot/musl/testimage:
+  extends: .build
+
+qemuarmv5/testimage:
+  extends: .build
+
+sgi575:
+  extends: .build
+
+tc0:
+  extends: .build
+
+
+#
+# Utility tasks, not executed automatically
+#
+
+delete-dl-dir:
+  extends: .setup
+  stage: prep
+  when: manual
+  script:
+  - rm -rf $DL_DIR/*
+
+delete-repo-dir:
+  extends: .setup
+  stage: prep
+  when: manual
+  script:
+  - rm -rf $KAS_REPO_REF_DIR/*
+
+# Delete all sstate
+delete-sstate:
+  extends: .setup
+  stage: prep
+  when: manual
+  script:
+  - rm -rf $SSTATE_DIR/*
+
+delete-toolchains:
+  extends: .setup
+  stage: prep
+  when: manual
+  script:
+  - rm -rf $TOOLCHAIN_DIR/*
+
+# Wipe out old sstate
+prune-sstate:
+  extends: .setup
+  stage: prep
+  when: manual
+  script:
+  - du -h -s $SSTATE_DIR
+  - find $SSTATE_DIR -type f -atime +30 -delete
+  - du -h -s $SSTATE_DIR
+
+# Report on disk usage
+usage:
+  extends: .setup
+  stage: prep
+  when: manual
+  script:
+  - du -h -s $DL_DIR $SSTATE_DIR $KAS_REPO_REF_DIR $TOOLCHAIN_DIR

ci/a5ds.yml

@@ -0,0 +1,6 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+
+machine: a5ds

ci/armgcc.yml

@@ -0,0 +1,6 @@
+header:
+  version: 9
+
+local_conf_header:
+  libc: |
+    GCCVERSION = "arm-9.2"

ci/base.yml

@@ -0,0 +1,45 @@
+header:
+  version: 9
+
+distro: poky
+
+defaults:
+  repos:
+    refspec: gatesgarth
+
+repos:
+  meta-arm:
+    layers:
+      meta-arm:
+      meta-arm-bsp:
+      meta-arm-toolchain:
+
+  poky:
+    url: https://git.yoctoproject.org/git/poky
+    layers:
+      meta:
+      meta-poky:
+
+env:
+  BB_LOGCONFIG: ""
+  TOOLCHAIN_DIR: ""
+
+local_conf_header:
+  base: |
+    CONF_VERSION = "1"
+    PACKAGE_CLASSES = "package_ipk"
+    LICENSE_FLAGS_WHITELIST += "armcompiler"
+    PACKAGECONFIG_remove_pn-qemu-system-native = "gtk+ sdl"
+    EXTRA_IMAGE_FEATURES_append = " debug-tweaks"
+    BB_NUMBER_THREADS = "16"
+    PARALLEL_MAKE = "-j16"
+    INHERIT += "rm_work"
+    PACKAGECONFIG_append_pn-perf = " coresight"
+  ptest: |
+    DISTRO_FEATURES_remove = "ptest"
+
+machine: unset
+
+target:
+  - core-image-base
+  - perf

ci/bootstrap.yml

@@ -0,0 +1,9 @@
+header:
+  version: 9
+
+target:
+  - binutils-cross-aarch64
+  - gcc-cross-aarch64
+  - python3-native
+  - opkg-native
+  - rpm-native

ci/check-machine-coverage

@@ -0,0 +1,26 @@
+#! /usr/bin/env python3
+
+from pathlib import Path
+import sys
+
+metaarm = Path.cwd()
+
+if metaarm.name != "meta-arm":
+    print("Not running inside meta-arm")
+    sys.exit(1)
+
+# All machine configurations
+machines = metaarm.glob("meta-*/conf/machine/*.conf")
+machines = set(p.stem for p in machines)
+
+# All ci files
+ci = metaarm.glob("ci/*.yml")
+ci = set(p.stem for p in ci)
+
+missing = machines - ci
+print(f"The following machines are missing: {', '.join(sorted(missing))}.")
+
+covered = len(machines) - len(missing)
+total = len(machines)
+percent = int(covered / total * 100)
+print(f"Coverage: {percent}%")

ci/check-warnings

@@ -0,0 +1,19 @@
+#! /bin/bash
+
+# Expects the path to a log file as $1, and if this file has any content
+# then display the contents and exit with an error code.
+
+set -e -u
+
+LOGFILE=$1
+
+LINES=$(grep --invert-match "attempting MIRRORS if available" $LOGFILE | wc -l)
+if test "$LINES" -ne 0; then
+    echo ==============================
+    echo The build had warnings/errors:
+    echo ==============================
+    cat $LOGFILE
+    exit 1
+fi
+
+exit 0

ci/clang.yml

@@ -0,0 +1,11 @@
+header:
+  version: 9
+
+repos:
+  meta-clang:
+    url: https://github.com/kraj/meta-clang
+    refspec: gatesgarth
+
+local_conf_header:
+  clang: |
+    TOOLCHAIN = "clang"

ci/corstone700-fvp.yml

@@ -0,0 +1,10 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+
+machine: corstone700-fvp
+
+local_conf_header:
+  image: |
+    CORE_IMAGE_EXTRA_INSTALL = "corstone700-test-app"

ci/corstone700-mps3.yml

@@ -0,0 +1,6 @@
+header:
+  version: 9
+  includes:
+    - corstone700-fvp.yml
+
+machine: corstone700-mps3

ci/external-gccarm.yml

@@ -0,0 +1,8 @@
+header:
+  version: 9
+
+local_conf_header:
+  cc: |
+    PNBLACKLIST[gcc-cross-arm] = "Using external toolchain"
+    TCMODE = "external-arm"
+    EXTERNAL_TOOLCHAIN = "${TOPDIR}/toolchains/${TARGET_ARCH}"

ci/foundation-armv8.yml

@@ -0,0 +1,6 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+
+machine: foundation-armv8

ci/fvp-base-arm32.yml

@@ -0,0 +1,6 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+
+machine: fvp-base-arm32

ci/fvp-base.yml

@@ -0,0 +1,7 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+
+machine: fvp-base
+

ci/gem5-arm64.yml

@@ -0,0 +1,21 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+
+repos:
+  meta-arm:
+    layers:
+      meta-gem5:
+
+  meta-openembedded:
+    url: https://git.openembedded.org/meta-openembedded
+    layers:
+      meta-oe:
+
+machine: gem5-arm64
+
+target:
+  - core-image-minimal
+  - perf
+  - gem5-aarch64-native

ci/get-binary-toolchains

@@ -0,0 +1,46 @@
+#!/bin/bash
+set -u
+
+HOST_ARCH=$(uname -m)
+VER="10.2-2020.11"
+
+DOWNLOAD_DIR=$1
+TOOLCHAIN_DIR=$2
+TOOLCHAIN_LINK_DIR=$3
+
+# These should be already created by .gitlab-ci.yml, but do here if run outside of that env
+mkdir -p $DOWNLOAD_DIR $TOOLCHAIN_DIR $TOOLCHAIN_LINK_DIR
+
+if [ $HOST_ARCH = "aarch64" ]; then
+	#AArch64 Linux hosted cross compilers
+
+	#AArch32 target with hard float (arm-none-linux-gnueabihf)
+	wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
+elif [ $HOST_ARCH = "x86_64" ]; then
+	#x86_64 Linux hosted cross compilers
+
+	#AArch32 target with hard float (arm-linux-none-gnueabihf)
+	wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-arm-none-linux-gnueabihf.tar.xz
+
+	#AArch64 GNU/Linux target (aarch64-none-linux-gnu)
+	wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64-none-linux-gnu.tar.xz
+
+	#AArch64 GNU/Linux target (aarch64_be-none-linux-gnu)
+	wget -P $DOWNLOAD_DIR -nc https://developer.arm.com/-/media/Files/downloads/gnu-a/$VER/binrel/gcc-arm-$VER-$HOST_ARCH-aarch64_be-none-linux-gnu.tar.xz
+else
+	echo "ERROR - Unknown build arch of $HOST_ARCH"
+	exit 1
+fi
+
+for i in arm aarch64 aarch64_be; do
+	if [ ! -d $TOOLCHAIN_DIR/gcc-arm-$VER-$HOST_ARCH-$i-none-linux-gnu*/ ]; then
+		if [ ! -f $DOWNLOAD_DIR/gcc-arm-$VER-$HOST_ARCH-$i-none-linux-gnu*.tar.xz ]; then
+			continue
+		fi
+
+		tar -C $TOOLCHAIN_DIR -axvf $DOWNLOAD_DIR/gcc-arm-$VER-$HOST_ARCH-$i-none-linux-gnu*.tar.xz
+	fi
+
+	# Setup a link for the toolchain to use local to the building machine (e.g., not in a shared location)
+	ln -s $TOOLCHAIN_DIR/gcc-arm-$VER-$HOST_ARCH-$i-none-linux-gnu* $TOOLCHAIN_LINK_DIR/$i
+done

ci/jobs-to-kas

@@ -0,0 +1,19 @@
+#! /bin/bash
+
+# Read a GitLab CI job name on $1 and transform it to a
+# list of Kas yaml files
+
+set -e -u
+
+# Read Job namne from $1 and split on /
+IFS=/ read -r -a PARTS<<<$1
+
+# Prefix each part with ci/
+PARTS=("${PARTS[@]/#/ci/}")
+
+# Suffix each part with .yml
+PARTS=("${PARTS[@]/%/.yml}")
+
+# Print colon-separated
+IFS=":"
+echo "${PARTS[*]}"

ci/juno.yml

@@ -0,0 +1,6 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+
+machine: juno

ci/logging.yml

@@ -0,0 +1,13 @@
+# Python logging configuration to write all warnings to a separate file
+version: 1
+
+handlers:
+  warnings:
+    class: logging.FileHandler
+    level: WARNING
+    filename: warnings.log
+    formatter: BitBake.logfileFormatter
+
+loggers:
+  BitBake:
+    handlers: [warnings]

ci/meta-python.yml

@@ -0,0 +1,9 @@
+header:
+  version: 9
+
+repos:
+  meta-openembedded:
+    url: https://git.openembedded.org/meta-openembedded
+    layers:
+      meta-oe:
+      meta-python:

ci/meta-zephyr.yml

@@ -0,0 +1,8 @@
+header:
+  version: 9
+  includes:
+    - meta-python.yml
+
+repos:
+  meta-zephyr:
+    url: https://git.yoctoproject.org/git/meta-zephyr

ci/musca-b1.yml

@@ -0,0 +1,11 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+    - meta-zephyr.yml
+
+machine: musca-b1
+
+target:
+  - trusted-firmware-m
+  - zephyr-philosophers

ci/musca-s1.yml

@@ -0,0 +1,10 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+    - meta-python.yml
+
+machine: musca-s1
+
+target:
+  - trusted-firmware-m

ci/musl.yml

@@ -0,0 +1,6 @@
+header:
+  version: 9
+
+local_conf_header:
+  libc: |
+    TCLIBC = "musl"

ci/n1sdp.yml

@@ -0,0 +1,6 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+
+machine: n1sdp

ci/qemuarm.yml

@@ -0,0 +1,6 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+
+machine: qemuarm

ci/qemuarm64-secureboot.yml

@@ -0,0 +1,16 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+
+machine: qemuarm64-secureboot
+
+local_conf_header:
+  bugs: |
+    # Only ping until errors can be resolved
+    TEST_SUITES = "ping"
+
+target:
+  - core-image-base
+  - perf
+  - optee-examples

ci/qemuarmv5.yml

@@ -0,0 +1,11 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+
+machine: qemuarmv5
+
+local_conf_header:
+  bugs: |
+    # Remove parselogs until errors can be resolved
+    TEST_SUITES_remove = "parselogs"

ci/sgi575.yml

@@ -0,0 +1,6 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+
+machine: sgi575

ci/tc0.yml

@@ -0,0 +1,6 @@
+header:
+  version: 9
+  includes:
+    - base.yml
+
+machine: tc0

ci/testimage.yml

@@ -0,0 +1,17 @@
+header:
+  version: 9
+
+local_conf_header:
+  testimage: |
+    IMAGE_CLASSES += "testimage"
+    TESTIMAGE_AUTO = "1"
+  slirp: |
+    TEST_RUNQEMUPARAMS = "slirp"
+    TEST_SERVER_IP = "127.0.0.1"
+    QEMU_USE_SLIRP = "1"
+  packages: |
+    IMAGE_FEATURES_append = " ssh-server-dropbear"
+
+# Multiple targets are available, put it down to just one
+target:
+  - core-image-base

ci/update-repos

@@ -0,0 +1,41 @@
+#! /usr/bin/env python3
+
+# Update clones of the repositories we need in KAS_REPO_REF_DIR to speed up fetches
+
+import sys
+import os
+import subprocess
+import pathlib
+
+def repo_shortname(url):
+    # Taken from Kas (Repo.__getattr__) to ensure the logic is right
+    from urllib.parse import urlparse
+    url = urlparse(url)
+    return ('{url.netloc}{url.path}'
+            .format(url=url)
+            .replace('@', '.')
+            .replace(':', '.')
+            .replace('/', '.')
+            .replace('*', '.'))
+
+repositories = (
+    "https://git.yoctoproject.org/git/poky",
+    "https://git.openembedded.org/meta-openembedded",
+    "https://git.yoctoproject.org/git/meta-virtualization",
+    "https://git.yoctoproject.org/git/meta-zephyr",
+    "https://github.com/kraj/meta-clang",
+)
+
+if __name__ == "__main__":
+    if "KAS_REPO_REF_DIR" not in os.environ:
+        print("KAS_REPO_REF_DIR needs to be set")
+        sys.exit(1)
+
+    base_repodir = pathlib.Path(os.environ["KAS_REPO_REF_DIR"])
+
+    for repo in repositories:
+        repodir = base_repodir / repo_shortname(repo)
+        if repodir.exists():
+            subprocess.run(["git", "-C", repodir, "fetch"], check=True)
+        else:
+            subprocess.run(["git", "clone", "--bare", repo, repodir], check=True)

meta-arm-autonomy/classes/xenguest-image.bbclass

@@ -62,7 +62,7 @@ XENGUEST_IMAGE_DISK_PARTITIONS ??= "1:${XENGUEST_IMAGE_DISK_SIZE}:ext4:rootfs.ta
 # The "bridge" type will share the physical eth interface from dom0 with the
 # domU. This will allow the domU to have access to the external network.
 # The "nat" type will setup a virtual network between dom0 and domU and also
-# configure and run the dhcpd on dom0 to serve the domU.
+# configure and run the kea dhcp4 server on dom0 to serve the domU.
 # The "none" type will not affect any networking setting between on dom0 and
 # domU.
 XENGUEST_IMAGE_NETWORK_TYPE ??= "bridge"

meta-arm-autonomy/conf/distro/include/arm-autonomy-host.inc

@@ -9,10 +9,6 @@ DISTRO_FEATURES_NATIVE_append = " arm-autonomy-host"
 # a bbappend: RDEPENDS_${KERNEL_PACKAGE_NAME}-base = "${KERNEL_PACKAGE_NAME}-image"
 RDEPENDS_${KERNEL_PACKAGE_NAME}-base ?= ""
 
-# Until we don't move to use the kea dhcp-server we build dhcp_4.4.2.bb recipe
-# which depends on bind_9.11.22.bb recipe.
-PREFERRED_VERSION_bind ?= "9.11%"
-
 # Require extra machine specific settings from meta-arm-bsp dynamic-layers only
 # if meta-arm-bsp is in the bblayers.conf
 # Directory for meta-arm-autonomy/dynamic-layers/meta-arm-bsp machine extra settings

meta-arm-autonomy/conf/layer.conf

@@ -14,6 +14,7 @@ LAYERDEPENDS_meta-arm-autonomy = " \
    core \
    yocto \
    openembedded-layer \
+   networking-layer \
    virtualization-layer \
 "
 LAYERSERIES_COMPAT_meta-arm-autonomy = "gatesgarth"

meta-arm-autonomy/documentation/arm-autonomy-multiconfig.md

@@ -0,0 +1,195 @@
+arm-autonomy Multiconfig Build Environment Instructions
+==================
+
+This documentation explains how to simplify the process of building hosts
+and guests in a single bitbake command, rather than in seperate build
+folders. You can read more about multiconfig in the bitbake documentation:
+
+ - [bitbake user manual](https://www.yoctoproject.org/docs/latest/bitbake-user-manual/bitbake-user-manual.html)
+
+To achieve a multiconfig build, a number of different config files need to
+be created in a single build directory.
+
+Create a new project
+----------------
+
+Before you start, you will need to follow the instructions in
+"Create a project" from the quickstart guide, to create a new project
+directory with
+  ```
+  oe-init-build-env my-mc-project
+  ```
+Ensure it has all the required layers in bblayers.conf as listed in
+`arm-autonomy-quickstart.md`. The result should be a directory containing:
+
+```
+-- conf
+ | -- bblayers.conf
+ | -- local.conf
+ | -- templateconf.cfg
+```
+
+Add multiconfig
+----------------
+
+Here are the steps required to make the project build both the host and any
+number of guests as required.
+
+1. Create a new directory under `conf/` named `multiconfig/`
+
+2. Create two new files in this directory:
+`multiconfig/host.conf`
+`multiconfig/guest.conf`
+These files will contain any configurations that a specific to either the
+host or the guest
+
+```
+-- conf
+ | -- bblayers.conf
+ | -- local.conf
+ | -- templateconf.cfg
+ | -- multiconfig
+    | -- host.conf
+    | -- guest.conf
+```
+
+3. In `local.conf` the following config variables must be added:
+
+```
+MACHINE ?= "fvp-base"
+
+# ---Guest Config Start--- #
+MC_GUEST = "guest"
+
+MC_GUEST_NAME = "guest1"
+
+MC_GUEST_IMAGERECIPE = "core-image-minimal"
+MC_GUEST_MACHINE = "arm64-autonomy-guest"
+
+MC_GUEST_INITRAMFS_IMAGE_BUNDLE ?= ""
+MC_GUEST_INITRAMFS_IMAGE ?= ""
+
+# Uncomment for initramfs
+#MC_GUEST_INITRAMFS_IMAGE_BUNDLE = "1"
+#MC_GUEST_INITRAMFS_IMAGE = "${MC_GUEST_IMAGERECIPE}"
+
+# These variables are set automatically, don't edit them!
+MC_GUEST_FILENAME_PREFIX = "${@ 'Image-initramfs' if d.getVar('MC_GUEST_INITRAMFS_IMAGE_BUNDLE',d) else '${MC_GUEST_IMAGERECIPE}' }"
+
+MC_GUEST_FILENAME = "${MC_GUEST_FILENAME_PREFIX}-${MC_GUEST_MACHINE}.xenguest"
+
+MC_GUEST_DEP = "${@ 'virtual/kernel:do_deploy' if d.getVar('MC_GUEST_INITRAMFS_IMAGE_BUNDLE',d) else '${MC_GUEST_IMAGERECIPE}:do_image_complete'}"
+
+MC_DOIMAGE_MCDEPENDS += "mc:${MC_HOST}:${MC_GUEST}:${MC_GUEST_DEP} "
+
+BBMULTICONFIG += "${MC_GUEST} "
+
+ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUESTS += "file://${TOPDIR}/${MC_GUEST}/deploy/images/${MC_GUEST_MACHINE}/${MC_GUEST_FILENAME};guestname=${MC_GUEST_NAME} "
+# ---Guest Config End--- #
+
+# ---Host Config Start--- #
+MC_HOST = "host"
+
+BBMULTICONFIG += "${MC_HOST} "
+# ---Host Config End--- #
+```
+
+These variables will be used in both of the multiconf files. `MC_HOST` and
+`MC_GUEST` should not be altered without renaming the conf files, but most
+`MC_GUEST_*` variables can be customised if you desire.
+
+4. Next set the contents of `multiconfig/guest.conf`:
+
+```
+TMPDIR = "${TOPDIR}/${MC_GUEST}"
+
+MACHINE = "${MC_GUEST_MACHINE}"
+DISTRO_FEATURES += " arm-autonomy-guest"
+
+INITRAMFS_IMAGE_BUNDLE = "${MC_GUEST_INITRAMFS_IMAGE_BUNDLE}"
+INITRAMFS_IMAGE = "${MC_GUEST_INITRAMFS_IMAGE}"
+
+IMAGE_FSTYPES += "${@ 'cpio' if d.getVar('MC_GUEST_INITRAMFS_IMAGE_BUNDLE',d) else ''}"
+
+# ANY OTHER GUEST CONFIG
+```
+
+This contents shouldn't be changed directly, rather change the equivalent
+config in local.conf. You can append any other config desired for the
+guest at this point, for example `XENGUEST_IMAGE_DISK_SIZE`
+
+Make sure not to change `${DEPLOY_DIR_IMAGE}` to anything other than
+`${TMPDIR}/deploy/images`, as this is assumed by local.conf.
+
+5. Lastly set the contents of `multiconfig/host.conf`:
+
+```
+TMPDIR = "${TOPDIR}/${MC_HOST}"
+
+DISTRO_FEATURES += " arm-autonomy-host"
+```
+
+Building the image
+----------------
+
+To build the multiconfig image the command is:
+```
+bitbake mc:host:arm-autonomy-host-image-minimal
+```
+
+You should see that this triggers guest tasks to be built in
+parallel. Once the build completes the guest will already be in the
+rootfs of the host thanks to `ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUEST`
+
+The deployed image including the guest will be in `host/deploy/images/`
+
+
+Multiple Guests
+----------------
+
+To have multiple guests with the same config the line which appends to
+`ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUEST` just needs to be duplicated with
+a different guestname.
+
+To have different config for each guest, each will need its own config
+file similar to guest.conf, ensuring TMPDIR is set to a different path,
+and everything between `---Guest Config Start---` and
+`---Guest Config End---` will need to be duplicated.
+
+Any copies of variables that start `MC_GUEST` must be altered to avoid
+collisions (e.g. `MC_GUEST_2_*`), and the name of the conf file must also
+be added to BBMULTICONFIG.
+
+
+Guest with provisioned disk
+----------------
+
+To add guest rootfs partition to host wic image,
+set `AUTONOMY_HOST_EXTRA_PARTITION` with proper wks partition entry, e.g:
+
+```
+AUTONOMY_HOST_EXTRA_PARTITION = "part --label provisioned-guest --source rawcopy --fstype=ext4 --ondisk sda --align 1024 \
+--sourceparams=file=${TOPDIR}/${MC_GUEST}/deploy/images/${MC_GUEST_MACHINE}/${MC_GUEST_FILENAME_PREFIX}-${MC_GUEST_MACHINE}.ext4"
+```
+
+inside host.conf file.
+
+The rest of the configuration has to be appended to guest.conf file:
+
+```
+XENGUEST_IMAGE_DISK_SIZE = "0"
+XENGUEST_IMAGE_SRC_URI_XEN_CONFIG = "file://\${TOPDIR}/path/to/rootdisk.cfg"
+XENGUEST_IMAGE_DISK_DEVICE = "_GUEST_DISK_DEVICE_"
+XENGUEST_IMAGE_ROOT = "/dev/xvda"
+IMAGE_ROOTFS_SIZE = "102400"
+IMAGE_FSTYPES = "ext4"
+```
+
+content of rootdisk.cfg"
+
+```
+disk = ["phy:_GUEST_DISK_DEVICE_,xvda,w"]
+```
+
+`_GUEST_DISK_DEVICE_` should be substituted with `/dev/sdaX`,
+according to wks file.

meta-arm-autonomy/documentation/arm-autonomy-quickstart.md

@@ -26,7 +26,6 @@ First you must download the Yocto layers needed:
  - [poky](https://git.yoctoproject.org/poky)
  - [meta-virtualization](https://git.yoctoproject.org/meta-virtualization)
  - [meta-arm](https://git.yoctoproject.org/meta-arm)
- - [meta-kernel](https://gitlab.com/openembedded/community/meta-kernel.git)
  - all other layers you might want to use
 
 For each of the downloaded layer make sure you checkout the release of Yocto
@@ -57,7 +56,6 @@ Here are the main steps to create an arm-autonomy project:
   bitbake-layers add-layer $LAYERDIR_BASE/meta-poky $LAYERDIR_BASE/meta-yocto-bsp \
    $LAYERDIR_BASE/meta-openembedded/meta-oe $LAYERDIR_BASE/meta-openembedded/meta-python \
    $LAYERDIR_BASE/meta-openembedded/meta-filesystems $LAYERDIR_BASE/meta-openembedded/meta-networking \
-   $LAYERDIR_BASE/meta-virtualization $LAYERDIR_BASE/meta-kernel \
    $LAYERDIR_BASE/meta-arm/meta-arm $LAYERDIR_BASE/meta-arm/meta-arm-toolchain \
    $LAYERDIR_BASE/meta-arm/meta-arm-bsp $LAYERDIR_BASE/meta-arm/meta-arm-autonomy \
   ```
@@ -73,7 +71,6 @@ Here are the main steps to create an arm-autonomy project:
     /home/user/arm-autonomy/meta-openembedded/meta-filesystems \
     /home/user/arm-autonomy/meta-openembedded/meta-networking \
     /home/user/arm-autonomy/meta-virtualization \
-    /home/user/arm-autonomy/meta-kernel \
     /home/user/arm-autonomy/meta-arm/meta-arm \
     /home/user/arm-autonomy/meta-arm/meta-arm-toolchain \
     /home/user/arm-autonomy/meta-arm/meta-arm-bsp \
@@ -122,6 +119,10 @@ To boot the system using an u-boot base board you will need to:
 
 In this example the addresses might need to be adapted depending on your board.
 
+For arm-autonomy host on FVP-Base u-boot has been modified such that
+`booti 0x84000000 - 0x83000000` is the default boot command. If FVP-Base is your
+MACHINE target there should be no need to interfere with u-boot.
+
 Guest project
 -------------
 The guest projects are not target specific and will use a Yocto MACHINE defined
@@ -147,6 +148,9 @@ To create a guest project:
 The build will create a ".xenguest" image that can be use on an host project
 with the xenguest-manager.
 
+The guest can also be built as a 'multiconfig' sub project of the host, see
+`meta-arm-autonomy/documentation/arm-autonomy-multiconfig.md` for more information
+
 Include guests directly in the host image
 -----------------------------------------
 The layer provides a way to directly include in the host project one or several
@@ -209,7 +213,7 @@ and is configuring it by default to use dhcp.
 If you need a different type of configuration you can set
 XENGUEST_NETWORK_BRIDGE_CONFIG in a xenguest-network-bridge.bbappend to use
 a different file.
-The recipe will look for the file in ${WORKDIR} so you will need to add it to 
+The recipe will look for the file in ${WORKDIR} so you will need to add it to
 SRC_URI in your bbappend.
 The recipe will also substitute `###BRIDGE_NAME###` with the bridge name
 configured in ${XENGUEST_NETWORK_BRIDGE_NAME}.

meta-arm-autonomy/documentation/xenguest-manager.md

@@ -48,16 +48,16 @@ project compilation (those can be set in your project local.conf, for example).
 
 The following parameters are available:
 
-- XENGUEST_MANAGER_VOLUME_DEVICE: This is the device path used by the 
+- XENGUEST_MANAGER_VOLUME_DEVICE: This is the device path used by the
   xenguest-manager on the device to create LVM disks when guests have a disk
   configuration.
   This is set by default to "/dev/sda2".
 
-- XENGUEST_MANAGER_VOLUME_NAME: This is the LVM volume name that the 
+- XENGUEST_MANAGER_VOLUME_NAME: This is the LVM volume name that the
   xenguest-manager will create and use to create guest LVM disks.
   This is set by default to "vg-xen".
 
-- XENGUEST_MANAGER_GUEST_DIR: This is the directory on Dom0 where the 
+- XENGUEST_MANAGER_GUEST_DIR: This is the directory on Dom0 where the
   xenguest-manager will look for xenguest images to create during init. That's
   the place where xenguest images can be added to have them automatically
   created during next Dom0 boot. The xenguests found there will only be created
@@ -65,3 +65,37 @@ The following parameters are available:
   name).
   This is set by default to "/usr/share/guests".
 
+Init scripts
+------------
+
+Shell scripts can be executed on the host when a guest is started. Depending on
+when the script should be executed it should be installed in a different
+directory on the target:
+
+- /etc/xenguest/init.pre  : Executed first, prior to guest creation
+
+- /etc/xenguest/init.d    : Executed after guest creation, but before it is started
+
+- /etc/xenguest/init.post : Executed after starting the guest
+
+Inside the directory, scripts will be executed in alphabetical order.
+
+Since these scripts are sourced by xenguest-manager they can acccess functions
+and variables from the parent file's scope, including:
+
+- ${guestname}    : The name of the guest being created
+
+- ${guestdir}     : The path to the guest directory
+
+- ${guestcfgfile} : The name of the config file for the starting guest
+
+- ${LOGFILE}      : The file to append any logging to, e.g.
+                     echo "Hello, World" >> ${LOGFILE}
+
+Sourcing also allows the script to access params.cfg.
+
+
+An example of how to create the directory and install an init shell script can
+be found in:
+  recipes-extended/xenguest/xenguest-network.bb
+Where network-bridge.sh is installed from network-bridge.sh.in

meta-arm-autonomy/documentation/xenguest-network.md

@@ -12,9 +12,10 @@ At the moment 3 types of network arrangements are provided:
 
 - Bridge: where the guest vif is added to the created bridge interface;
 
-- NAT: where a private subnet is created for the guest, a dhcpd is started on
-  the host to serve the guest and the proper iptables rules are created to
-  allow the guest to access the external network;
+- NAT: where a private subnet is created for the guest,
+  a kea dhcp4 server is started on the host to serve the guest
+  and the proper iptables rules are created
+  to allow the guest to access the external network;
 
 - None: the guest vif is not connected to the bridge.
 
@@ -55,17 +56,20 @@ The following parameters are available:
   contains the dom0 physical interface giving the guest direct access to the
   external network.
   The **nat** type will setup a private network between dom0 and domU, setup
-  the appropriate routing table, configure and run the dhcpd on dom0 to serve
-  the domU and apply the iptables rules to allow the guest to acess the
-  external network. The dhcpd configuration for the guest can be customised by
-  replacing the
-  "meta-arm-autonomy/recipes-extended/xenguest/files/dhcpd-params.cfg" file
-  in a xenguest-network.bbappend. The dhcpd-params.cfg file is installed in
+  the appropriate routing table, configure and run the kea dhcp4 server
+  on dom0 to serve the domU and apply the iptables rules to allow the guest
+  to acess the external network. The kea dhcp4 server configuration for
+  the guest can be customised by replacing the
+  "meta-arm-autonomy/recipes-extended/xenguest/files/kea-subnet4.json" file
+  in a xenguest-network.bbappend. The kea-subnet4.json file is installed in
   the xenguest image and copied to
-  "/etc/xenguest/guests/${guestname}/files/dhcpd-params.cfg" when the guest
+  "/etc/xenguest/guests/${guestname}/files/kea-subnet4.json" when the guest
   image is created. It will be consumed by the
   "/etc/xen/scripts/vif-post.d/00-vif-xenguest.hook" script which is called by
   "/etc/xen/scripts/vif-nat" script when starting/stopping the xenguest.
+  After guest start, "/etc/xenguest/init.post/xenguest-network-init-post.sh"
+  script is called to reload kea dhcp4 server with updated configuration,
+  after virtual network interface is ready.
   In the guest project, the NAT port forward can be customised by changing
   the XENGUEST_IMAGE_HOST_PORT (default: "1000 + ${domid}") and
   XENGUEST_IMAGE_GUEST_PORT (default: "22") variables in local.conf or

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/conf/machine/juno-extra-settings.inc

@@ -1,4 +1,26 @@
 # Extra machine settings for juno
+KERNEL_ALT_IMAGETYPE = "Image.lzma"
 
 # Juno board has 2 network interfaces, add both of them to the bridge
 XENGUEST_NETWORK_BRIDGE_MEMBERS ?= "eth0 eth1"
+XEN_DEVICETREE_DOM0_SIZE ?= "0x02400000"
+
+# We need to extend the wks search path to be able to find the wks file set in
+# ARM_AUTONOMY_WKS_FILE.
+WKS_SEARCH_PATH_prepend := "${ARM_AUTONOMY_ARM_BSP_DYNAMIC_DIR}/wic:"
+
+ARM_AUTONOMY_WKS_FILE ?= "arm-autonomy-juno-disk.wks.in"
+# set wks file only if INITRAMFS_IMAGE_BUNDLE is not set
+WKS_FILE = "${@bb.utils.contains('INITRAMFS_IMAGE_BUNDLE', '1', '',\
+                                 '${ARM_AUTONOMY_WKS_FILE}', d)}"
+
+# Set the wks guest partition size and unit. It must be aligned with the sum of
+# all XENGUEST_IMAGE_DISK_SIZE set for the guests. By default, LVM2 metadata is
+# 1 MiB per physical volume, hence it needs to be taken into account when
+# setting GUEST_PART_SIZE. The XENGUEST_IMAGE_DISK_SIZE default value is 4GiB.
+GUEST_PART_SIZE ?= "4097"
+GUEST_PART_SIZE_UNIT ?= "M"
+
+# set wic image type only if INITRAMFS_IMAGE_BUNDLE is not set
+IMAGE_FSTYPES += "${@bb.utils.contains('INITRAMFS_IMAGE_BUNDLE', '1', '',\
+                                       'wic wic.gz wic.bmap', d)}"

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-bsp/images/firmware-image-juno.bbappend

@@ -4,6 +4,19 @@ OVERRIDES_append = "${@bb.utils.contains('DISTRO_FEATURES', 'xen', ':xen', '', d
 
 FILESEXTRAPATHS_prepend_xen := "${THISDIR}/${PN}:"
 
+DEPENDS_append_xen = " dos2unix-native"
+
+SRC_URI_append_xen = " file://add-xen-support.patch;patchdir=../"
+
+do_install_append_xen() {
+    mv -v ${D}/${UNPACK_DIR}/SOFTWARE/uEnv.txt \
+          ${D}/${UNPACK_DIR}/SOFTWARE/uenvfile
+    for dir in $(ls ${D}/${UNPACK_DIR}/SITE1/)
+    do
+        unix2dos ${D}/${UNPACK_DIR}/SITE1/${dir}/images.txt
+    done
+}
+
 DEPLOY_EXTRA_DEPS ??= ""
 DEPLOY_EXTRA_DEPS_xen = "xen:do_deploy xen-devicetree:do_deploy"
 
@@ -14,8 +27,24 @@ do_deploy_prepend_xen() {
     # xen:do_deploy and xen-devicetree:do_deploy when
     # INITRAMFS_IMAGE_BUNDLE = "1", we need to handle the xen and
     # xen-devicetree binaries copying in the do_deploy task.
-    cp  ${DEPLOY_DIR_IMAGE}/xen-${COMPATIBLE_MACHINE}.efi \
-        ${D}/${UNPACK_DIR}/SOFTWARE/xen
-    cp ${DEPLOY_DIR_IMAGE}/*xen.dtb \
-        ${D}/${UNPACK_DIR}/SOFTWARE/
+
+    mkdir -p ${D}/${UNPACK_DIR}/SOFTWARE/XEN
+    cp  -v ${DEPLOY_DIR_IMAGE}/xen-${COMPATIBLE_MACHINE}.efi \
+        ${D}/${UNPACK_DIR}/SOFTWARE/XEN/xen
+
+    for dtb in $(basename -s .dtb ${KERNEL_DEVICETREE})
+    do
+        cp -v ${DEPLOY_DIR_IMAGE}/${dtb}-xen.dtb \
+            ${D}/${UNPACK_DIR}/SOFTWARE/XEN/${dtb}.dtb
+    done
+
+    bbnote "Xen binaries added under SOFTWARE/XEN directory"
+
+    if [ "${INITRAMFS_IMAGE_BUNDLE}" != "1" -a "${KERNEL_ALT_IMAGETYPE}" = "Image.lzma" ]; then
+        # KERNEL_ALT_IMAGETYPE is expected to be Image.lzma,
+        # however NOR flash filesystem is DOS compatible with 8.3 naming,
+        # so we need to replace ".lzma" with ".lzm"
+        cp -L -f ${DEPLOY_DIR_IMAGE}/${KERNEL_ALT_IMAGETYPE} \
+                 ${D}/${UNPACK_DIR}/SOFTWARE/Image.lzm
+    fi
 }

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-bsp/images/firmware-image-juno/add-xen-support.patch

@@ -0,0 +1,173 @@
+arm-bsp/firmware-image-juno: add xen support
+
+This patch adds xen and dtbs binaries entries to images-r[012].txt files.
+These images-r[012].txt files contain NOR filesystem entries details,
+like file offset, name, path etc.
+
+It also adds customization for uEnv.txt file, that allows to autoboot xen.
+
+Upstream-Status: Inappropriate [configuration]
+Signed-off-by: Kamil Dziezyk <kamil.dziezyk@arm.com>
+
+diff -u a/images-r0.txt b/images-r0.txt
+--- a/images-r0.txt	2020-11-25 20:25:38.677687712 +0100
++++ b/images-r0.txt	2020-11-25 20:36:55.482194294 +0100
+@@ -1,7 +1,7 @@
+ TITLE: Versatile Express Images Configuration File
+ 
+ [IMAGES]
+-TOTALIMAGES: 10                  ;Number of Images (Max: 32)
++TOTALIMAGES: 11                  ;Number of Images (Max: 32)
+ 
+ NOR0UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+ NOR0ADDRESS: 0x00000000          ;Image Flash Address
+@@ -17,14 +17,14 @@
+ 
+ NOR2UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+ NOR2ADDRESS: 0x00500000          ;Image Flash Address
+-NOR2FILE: \SOFTWARE\Image        ;Image File Name
+-NOR2NAME: norkern                ;Rename kernel to norkern
++NOR2FILE: \SOFTWARE\Image.lzm    ;Image File Name
++NOR2NAME: norkern.lzm            ;Rename kernel to norkern.lzm
+ NOR2LOAD: 00000000               ;Image Load Address
+ NOR2ENTRY: 00000000              ;Image Entry Point
+ 
+ NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+ NOR3ADDRESS: 0x02900000          ;Image Flash Address
+-NOR3FILE: \SOFTWARE\juno.dtb     ;Image File Name
++NOR3FILE: \SOFTWARE\XEN\juno.dtb ;Image File Name
+ NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
+ NOR3LOAD: 00000000               ;Image Load Address
+ NOR3ENTRY: 00000000              ;Image Entry Point
+@@ -64,8 +64,13 @@
+ NOR9UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+ NOR9ADDRESS: 0x02A80000          ;Image Flash Address
+ NOR9NAME: uEnv.txt
+-NOR9FILE: \SOFTWARE\uEnv.txt     ;Image File Name
++NOR9FILE: \SOFTWARE\uenvfile     ;Image File Name
+ NOR9LOAD: 00000000               ;Image Load Address
+ NOR9ENTRY: 00000000              ;Image Entry Point
+ 
+-
++NOR10UPDATE: AUTO                ;Image Update:NONE/AUTO/FORCE
++NOR10ADDRESS: 0x03000000         ;Image Flash Address
++NOR10FILE: \SOFTWARE\XEN\xen     ;Image File Name
++NOR10NAME: xen
++NOR10LOAD: 00000000              ;Image Load Address
++NOR10ENTRY: 00000000             ;Image Entry Point
+diff -u a/images-r1.txt b/images-r1.txt
+--- a/images-r1.txt	2020-11-25 20:40:19.005177152 +0100
++++ b/images-r1.txt	2020-11-25 20:41:17.500886263 +0100
+@@ -1,7 +1,7 @@
+ TITLE: Versatile Express Images Configuration File
+ 
+ [IMAGES]
+-TOTALIMAGES: 10                  ;Number of Images (Max: 32)
++TOTALIMAGES: 11                  ;Number of Images (Max: 32)
+ 
+ NOR0UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+ NOR0ADDRESS: 0x00000000          ;Image Flash Address
+@@ -17,14 +17,14 @@
+ 
+ NOR2UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+ NOR2ADDRESS: 0x00500000          ;Image Flash Address
+-NOR2FILE: \SOFTWARE\Image        ;Image File Name
+-NOR2NAME: norkern                ;Rename kernel to norkern
++NOR2FILE: \SOFTWARE\Image.lzm    ;Image File Name
++NOR2NAME: norkern.lzm            ;Rename kernel to norkern.lzm
+ NOR2LOAD: 00000000               ;Image Load Address
+ NOR2ENTRY: 00000000              ;Image Entry Point
+ 
+ NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+ NOR3ADDRESS: 0x02900000          ;Image Flash Address
+-NOR3FILE: \SOFTWARE\juno-r1.dtb  ;Image File Name
++NOR3FILE: \SOFTWARE\XEN\juno-r1.dtb ;Image File Name
+ NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
+ NOR3LOAD: 00000000               ;Image Load Address
+ NOR3ENTRY: 00000000              ;Image Entry Point
+@@ -64,8 +64,13 @@
+ NOR9UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+ NOR9ADDRESS: 0x02A80000          ;Image Flash Address
+ NOR9NAME: uEnv.txt
+-NOR9FILE: \SOFTWARE\uEnv.txt     ;Image File Name
++NOR9FILE: \SOFTWARE\uenvfile     ;Image File Name
+ NOR9LOAD: 00000000               ;Image Load Address
+ NOR9ENTRY: 00000000              ;Image Entry Point
+ 
+-
++NOR10UPDATE: AUTO                ;Image Update:NONE/AUTO/FORCE
++NOR10ADDRESS: 0x03000000         ;Image Flash Address
++NOR10FILE: \SOFTWARE\XEN\xen     ;Image File Name
++NOR10NAME: xen
++NOR10LOAD: 00000000              ;Image Load Address
++NOR10ENTRY: 00000000             ;Image Entry Point
+diff -u a/images-r2.txt b/images-r2.txt
+--- a/images-r2.txt	2020-11-25 20:40:30.625119321 +0100
++++ b/images-r2.txt	2020-11-25 20:41:30.720820597 +0100
+@@ -1,7 +1,7 @@
+ TITLE: Versatile Express Images Configuration File
+ 
+ [IMAGES]
+-TOTALIMAGES: 10                  ;Number of Images (Max: 32)
++TOTALIMAGES: 11                  ;Number of Images (Max: 32)
+ 
+ NOR0UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+ NOR0ADDRESS: 0x00000000          ;Image Flash Address
+@@ -17,14 +17,14 @@
+ 
+ NOR2UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+ NOR2ADDRESS: 0x00500000          ;Image Flash Address
+-NOR2FILE: \SOFTWARE\Image        ;Image File Name
+-NOR2NAME: norkern                ;Rename kernel to norkern
++NOR2FILE: \SOFTWARE\Image.lzm    ;Image File Name
++NOR2NAME: norkern.lzm            ;Rename kernel to norkern.lzm
+ NOR2LOAD: 00000000               ;Image Load Address
+ NOR2ENTRY: 00000000              ;Image Entry Point
+ 
+ NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+ NOR3ADDRESS: 0x02900000          ;Image Flash Address
+-NOR3FILE: \SOFTWARE\juno-r2.dtb  ;Image File Name
++NOR3FILE: \SOFTWARE\XEN\juno-r2.dtb ;Image File Name
+ NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
+ NOR3LOAD: 00000000               ;Image Load Address
+ NOR3ENTRY: 00000000              ;Image Entry Point
+@@ -64,8 +64,13 @@
+ NOR9UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
+ NOR9ADDRESS: 0x02A80000          ;Image Flash Address
+ NOR9NAME: uEnv.txt
+-NOR9FILE: \SOFTWARE\uEnv.txt     ;Image File Name
++NOR9FILE: \SOFTWARE\uenvfile     ;Image File Name
+ NOR9LOAD: 00000000               ;Image Load Address
+ NOR9ENTRY: 00000000              ;Image Entry Point
+ 
+-
++NOR10UPDATE: AUTO                ;Image Update:NONE/AUTO/FORCE
++NOR10ADDRESS: 0x03000000         ;Image Flash Address
++NOR10FILE: \SOFTWARE\XEN\xen     ;Image File Name
++NOR10NAME: xen
++NOR10LOAD: 00000000              ;Image Load Address
++NOR10ENTRY: 00000000             ;Image Entry Point
+diff -u a/uEnv.txt b/uEnv.txt
+--- a/uEnv.txt	2020-11-20 13:48:31.845078690 +0100
++++ b/uEnv.txt	2020-11-25 20:30:00.572306675 +0100
+@@ -1,11 +1,16 @@
++xen_name=xen
++xen_addr=0x84000000
+ uenvcmd=run mybootcmd
++kernel_alt_name=norkern.lzm
++kernel_comp_addr_r=0x88080000
+ mybootcmd=echo Loading custom boot command; \
+ echo Loading kernel; \
+ afs load ${kernel_name} ${kernel_addr_r} ; \
+-if test $? -eq 1; then echo Loading ${kernel_alt_name} instead of ${kernel_name}; afs load ${kernel_alt_name} ${kernel_addr_r}; fi; \
++if test $? -eq 1; then echo Loading ${kernel_alt_name} instead of ${kernel_name}; afs load ${kernel_alt_name} ${kernel_comp_addr_r}; lzmadec ${kernel_comp_addr_r} ${kernel_addr_r}; fi; \
+ echo Loading device tree; \
+ afs load  ${fdtfile} ${fdt_addr_r}; \
+ if test $? -eq 1; then echo Loading ${fdt_alt_name} instead of ${fdtfile}; \
+ afs load ${fdt_alt_name} ${fdt_addr_r}; fi; fdt addr ${fdt_addr_r}; fdt resize; \
+-booti ${kernel_addr_r} - ${fdt_addr_r};
+-
++echo Loading Xen; \
++afs load  ${xen_name} ${xen_addr}; \
++if test $? -eq 0; then echo Booting Xen; bootefi ${xen_addr} ${fdt_addr_r}; fi;
+

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-bsp/images/firmware-image-juno/images-r0.txt

@@ -1,78 +0,0 @@
-TITLE: Versatile Express Images Configuration File
-
-[IMAGES]
-TOTALIMAGES: 11                  ;Number of Images (Max: 32)
-
-NOR0UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR0ADDRESS: 0x00000000          ;Image Flash Address
-NOR0FILE: \SOFTWARE\fip.bin      ;Image File Name
-NOR0LOAD: 00000000               ;Image Load Address
-NOR0ENTRY: 00000000              ;Image Entry Point
-
-NOR1UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR1ADDRESS: 0x03EC0000          ;Image Flash Address
-NOR1FILE: \SOFTWARE\bl1.bin      ;Image File Name
-NOR1LOAD: 00000000               ;Image Load Address
-NOR1ENTRY: 00000000              ;Image Entry Point
-
-NOR2UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR2ADDRESS: 0x00500000          ;Image Flash Address
-NOR2FILE: \SOFTWARE\Image        ;Image File Name
-NOR2NAME: norkern                ;Rename kernel to norkern
-NOR2LOAD: 00000000               ;Image Load Address
-NOR2ENTRY: 00000000              ;Image Entry Point
-
-NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR3ADDRESS: 0x02700000          ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno-xen.dtb ;Image File Name
-NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
-NOR3LOAD: 00000000               ;Image Load Address
-NOR3ENTRY: 00000000              ;Image Entry Point
-
-NOR4UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR4ADDRESS: 0x01D00000          ;Image Flash Address
-NOR4FILE: \SOFTWARE\xen          ;Image File Name
-NOR4NAME: xen
-NOR4LOAD: 00000000               ;Image Load Address
-NOR4ENTRY: 00000000              ;Image Entry Point
-
-NOR5UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR5ADDRESS: 0x025C0000          ;Image Flash Address
-NOR5FILE: \SOFTWARE\hdlcdclk.dat ;Image File Name
-NOR5LOAD: 00000000               ;Image Load Address
-NOR5ENTRY: 00000000              ;Image Entry Point
-
-NOR6UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR6ADDRESS: 0x03E40000          ;Image Flash Address
-NOR6FILE: \SOFTWARE\scp_bl1.bin  ;Image File Name
-NOR6LOAD: 00000000               ;Image Load Address
-NOR6ENTRY: 00000000              ;Image Entry Point
-
-NOR7UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR7ADDRESS: 0x0BF00000          ;Image Flash Address
-NOR7FILE: \SOFTWARE\startup.nsh  ;Image File Name
-NOR7NAME: startup.nsh
-NOR7LOAD: 00000000               ;Image Load Address
-NOR7ENTRY: 00000000              ;Image Entry Point
-
-NOR8UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR8ADDRESS: 0x0BFC0000          ;Image Flash Address
-NOR8FILE: \SOFTWARE\blank.img    ;Image File Name
-NOR8NAME: BOOTENV
-NOR8LOAD: 00000000               ;Image Load Address
-NOR8ENTRY: 00000000              ;Image Entry Point
-
-NOR9UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR9ADDRESS: 0x02600000          ;Image Flash Address
-NOR9FILE: \SOFTWARE\selftest     ;Image File Name
-NOR9LOAD: 00000000               ;Image Load Address
-NOR9ENTRY: 00000000              ;Image Entry Point
-
-NOR10UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR10ADDRESS: 0x02780000          ;Image Flash Address
-NOR10NAME: uEnv.txt
-NOR10FILE: \SOFTWARE\uEnv.txt     ;Image File Name
-NOR10LOAD: 00000000               ;Image Load Address
-NOR10ENTRY: 00000000              ;Image Entry Point
-
-

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-bsp/images/firmware-image-juno/images-r1.txt

@@ -1,78 +0,0 @@
-TITLE: Versatile Express Images Configuration File
-
-[IMAGES]
-TOTALIMAGES: 11                  ;Number of Images (Max: 32)
-
-NOR0UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR0ADDRESS: 0x00000000          ;Image Flash Address
-NOR0FILE: \SOFTWARE\fip.bin      ;Image File Name
-NOR0LOAD: 00000000               ;Image Load Address
-NOR0ENTRY: 00000000              ;Image Entry Point
-
-NOR1UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR1ADDRESS: 0x03EC0000          ;Image Flash Address
-NOR1FILE: \SOFTWARE\bl1.bin      ;Image File Name
-NOR1LOAD: 00000000               ;Image Load Address
-NOR1ENTRY: 00000000              ;Image Entry Point
-
-NOR2UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR2ADDRESS: 0x00500000          ;Image Flash Address
-NOR2FILE: \SOFTWARE\Image        ;Image File Name
-NOR2NAME: norkern                ;Rename kernel to norkern
-NOR2LOAD: 00000000               ;Image Load Address
-NOR2ENTRY: 00000000              ;Image Entry Point
-
-NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR3ADDRESS: 0x02700000          ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno-r1-xen.dtb  ;Image File Name
-NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
-NOR3LOAD: 00000000               ;Image Load Address
-NOR3ENTRY: 00000000              ;Image Entry Point
-
-NOR4UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR4ADDRESS: 0x01D00000          ;Image Flash Address
-NOR4FILE: \SOFTWARE\xen          ;Image File Name
-NOR4NAME: xen
-NOR4LOAD: 00000000               ;Image Load Address
-NOR4ENTRY: 00000000              ;Image Entry Point
-
-NOR5UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR5ADDRESS: 0x025C0000          ;Image Flash Address
-NOR5FILE: \SOFTWARE\hdlcdclk.dat ;Image File Name
-NOR5LOAD: 00000000               ;Image Load Address
-NOR5ENTRY: 00000000              ;Image Entry Point
-
-NOR6UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR6ADDRESS: 0x03E40000          ;Image Flash Address
-NOR6FILE: \SOFTWARE\scp_bl1.bin  ;Image File Name
-NOR6LOAD: 00000000               ;Image Load Address
-NOR6ENTRY: 00000000              ;Image Entry Point
-
-NOR7UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR7ADDRESS: 0x0BF00000          ;Image Flash Address
-NOR7FILE: \SOFTWARE\startup.nsh  ;Image File Name
-NOR7NAME: startup.nsh
-NOR7LOAD: 00000000               ;Image Load Address
-NOR7ENTRY: 00000000              ;Image Entry Point
-
-NOR8UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR8ADDRESS: 0x0BFC0000          ;Image Flash Address
-NOR8FILE: \SOFTWARE\blank.img    ;Image File Name
-NOR8NAME: BOOTENV
-NOR8LOAD: 00000000               ;Image Load Address
-NOR8ENTRY: 00000000              ;Image Entry Point
-
-NOR9UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR9ADDRESS: 0x02600000          ;Image Flash Address
-NOR9FILE: \SOFTWARE\selftest     ;Image File Name
-NOR9LOAD: 00000000               ;Image Load Address
-NOR9ENTRY: 00000000              ;Image Entry Point
-
-NOR10UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR10ADDRESS: 0x02780000          ;Image Flash Address
-NOR10NAME: uEnv.txt
-NOR10FILE: \SOFTWARE\uEnv.txt     ;Image File Name
-NOR10LOAD: 00000000               ;Image Load Address
-NOR10ENTRY: 00000000              ;Image Entry Point
-
-

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-bsp/images/firmware-image-juno/images-r2.txt

@@ -1,78 +0,0 @@
-TITLE: Versatile Express Images Configuration File
-
-[IMAGES]
-TOTALIMAGES: 11                  ;Number of Images (Max: 32)
-
-NOR0UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR0ADDRESS: 0x00000000          ;Image Flash Address
-NOR0FILE: \SOFTWARE\fip.bin      ;Image File Name
-NOR0LOAD: 00000000               ;Image Load Address
-NOR0ENTRY: 00000000              ;Image Entry Point
-
-NOR1UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR1ADDRESS: 0x03EC0000          ;Image Flash Address
-NOR1FILE: \SOFTWARE\bl1.bin      ;Image File Name
-NOR1LOAD: 00000000               ;Image Load Address
-NOR1ENTRY: 00000000              ;Image Entry Point
-
-NOR2UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR2ADDRESS: 0x00500000          ;Image Flash Address
-NOR2FILE: \SOFTWARE\Image        ;Image File Name
-NOR2NAME: norkern                ;Rename kernel to norkern
-NOR2LOAD: 00000000               ;Image Load Address
-NOR2ENTRY: 00000000              ;Image Entry Point
-
-NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR3ADDRESS: 0x02700000          ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno-r2-xen.dtb  ;Image File Name
-NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
-NOR3LOAD: 00000000               ;Image Load Address
-NOR3ENTRY: 00000000              ;Image Entry Point
-
-NOR4UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR4ADDRESS: 0x01D00000          ;Image Flash Address
-NOR4FILE: \SOFTWARE\xen          ;Image File Name
-NOR4NAME: xen
-NOR4LOAD: 00000000               ;Image Load Address
-NOR4ENTRY: 00000000              ;Image Entry Point
-
-NOR5UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR5ADDRESS: 0x025C0000          ;Image Flash Address
-NOR5FILE: \SOFTWARE\hdlcdclk.dat ;Image File Name
-NOR5LOAD: 00000000               ;Image Load Address
-NOR5ENTRY: 00000000              ;Image Entry Point
-
-NOR6UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR6ADDRESS: 0x03E40000          ;Image Flash Address
-NOR6FILE: \SOFTWARE\scp_bl1.bin  ;Image File Name
-NOR6LOAD: 00000000               ;Image Load Address
-NOR6ENTRY: 00000000              ;Image Entry Point
-
-NOR7UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR7ADDRESS: 0x0BF00000          ;Image Flash Address
-NOR7FILE: \SOFTWARE\startup.nsh  ;Image File Name
-NOR7NAME: startup.nsh
-NOR7LOAD: 00000000               ;Image Load Address
-NOR7ENTRY: 00000000              ;Image Entry Point
-
-NOR8UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR8ADDRESS: 0x0BFC0000          ;Image Flash Address
-NOR8FILE: \SOFTWARE\blank.img    ;Image File Name
-NOR8NAME: BOOTENV
-NOR8LOAD: 00000000               ;Image Load Address
-NOR8ENTRY: 00000000              ;Image Entry Point
-
-NOR9UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR9ADDRESS: 0x02600000          ;Image Flash Address
-NOR9FILE: \SOFTWARE\selftest     ;Image File Name
-NOR9LOAD: 00000000               ;Image Load Address
-NOR9ENTRY: 00000000              ;Image Entry Point
-
-NOR10UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR10ADDRESS: 0x02780000          ;Image Flash Address
-NOR10NAME: uEnv.txt
-NOR10FILE: \SOFTWARE\uEnv.txt     ;Image File Name
-NOR10LOAD: 00000000               ;Image Load Address
-NOR10ENTRY: 00000000              ;Image Entry Point
-
-

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/recipes-bsp/images/firmware-image-juno/uEnv.txt

@@ -1,15 +0,0 @@
-xen_name=xen
-xen_addr=0x84000000
-uenvcmd=run mybootcmd
-mybootcmd=echo Loading custom boot command; \
-echo Loading kernel; \
-afs load ${kernel_name} ${kernel_addr} ; \
-if test $? -eq 1; then echo Loading ${kernel_alt_name} instead of ${kernel_name}; afs load ${kernel_alt_name} ${kernel_addr}; fi; \
-echo Loading device tree; \
-afs load  ${fdtfile} ${fdt_addr}; \
-if test $? -eq 1; then echo Loading ${fdt_alt_name} instead of ${fdtfile}; \
-afs load ${fdt_alt_name} ${fdt_addr}; fi; fdt addr ${fdt_addr}; fdt resize; \
-echo Loading Xen; \
-afs load  ${xen_name} ${xen_addr}; \
-if test $? -eq 0; then echo Booting Xen; bootefi ${xen_addr} ${fdt_addr}; fi;
-

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/wic/arm-autonomy-juno-disk.wks.in

@@ -0,0 +1,14 @@
+# short-description: Create a disk image
+# long-description: Creates a partitioned disk image that the user
+# can directly dd to boot media.
+
+# For Juno first partition is rootfs normally populated as /dev/sda1
+part / --source rootfs --ondisk sda --fstype=ext4 --label root --align 1024
+
+# Second partition to accomodate guests images normally populated as /dev/sda2 (used by XENGUEST_MANAGER_VOLUME_DEVICE)
+part --label guests --source empty --ondisk sda --size="${GUEST_PART_SIZE}${GUEST_PART_SIZE_UNIT}" --system-id 8e --align 1024
+
+# Third partition is user defined entry normally populated as /dev/sda3
+${AUTONOMY_HOST_EXTRA_PARTITION}
+
+bootloader --ptable msdos

meta-arm-autonomy/dynamic-layers/meta-arm-bsp/wic/arm-autonomy-n1sdp-efidisk.wks.in

@@ -11,4 +11,7 @@ part / --source rootfs --ondisk sda --fstype=ext4 --label root --align 1024
 # Third partition to accomodate guests images normally populated as /dev/sda3 (used by XENGUEST_MANAGER_VOLUME_DEVICE)
 part --label guests --source empty --ondisk sda --size="${GUEST_PART_SIZE}${GUEST_PART_SIZE_UNIT}" --system-id 8e --align 1024
 
+# Fourth partition is user defined entry normally populated as /dev/sda4
+${AUTONOMY_HOST_EXTRA_PARTITION}
+
 bootloader --ptable msdos --configfile="${GRUB_CFG_FILE}"

meta-arm-autonomy/recipes-bsp/u-boot/u-boot-2020.07/fvp-base/xen_u-boot_kernel_addr.patch

@@ -0,0 +1,16 @@
+Upstream Status: Inappropriate [meta-arm-autonomy specifc u-boot config]
+Signed-off-by: Nathan Dunne <nathan.dunne@arm.com>
+
+diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
+index e63c335f85..9ee050a4a6 100644
+--- a/include/configs/vexpress_aemv8a.h
++++ b/include/configs/vexpress_aemv8a.h
+@@ -162,7 +162,7 @@
+ #elif CONFIG_TARGET_VEXPRESS64_BASE_FVP
+ #define CONFIG_EXTRA_ENV_SETTINGS	\
+ 				"kernel_name=Image\0"		\
+-				"kernel_addr=0x80080000\0"	\
++				"kernel_addr=0x84000000\0"	\
+ 				"initrd_name=ramdisk.img\0"	\
+ 				"initrd_addr=0x88000000\0"	\
+ 				"fdtfile=devtree.dtb\0"		\

meta-arm-autonomy/recipes-bsp/u-boot/u-boot_2020.07.bbappend

@@ -0,0 +1,9 @@
+# Machine specific u-boot
+
+FILESEXTRAPATHS_prepend := "${THISDIR}/${BP}:"
+
+#
+# FVP BASE
+#
+
+SRC_URI_append_fvp-base = "${@bb.utils.contains('DISTRO_FEATURES', 'arm-autonomy-host', ' file://xen_u-boot_kernel_addr.patch', '', d)}"

meta-arm-autonomy/recipes-connectivity/bind/README.md

@@ -1,4 +0,0 @@
-For now, arm-autonomy-host-image-minimal installs the dhcp-server package and
-the dchp-4.4.2 depends on bind 9.11 which recipe was copied from oe-core tree
-https://git.openembedded.org/openembedded-core/tree/meta/recipes-connectivity/bind?id=087e4fafeef82cfd3d71402d6b200fe831f48697
-since it got removed in the https://git.openembedded.org/openembedded-core/commit/meta/recipes-connectivity?id=29949cd7cf3a660fb3bcf251f5127a4cdb2804ec patch.

meta-arm-autonomy/recipes-connectivity/bind/bind/0001-avoid-start-failure-with-bind-user.patch

@@ -1,27 +0,0 @@
-From 31dde3562f287429eea94b77250d184818b49063 Mon Sep 17 00:00:00 2001
-From: Chen Qi <Qi.Chen@windriver.com>
-Date: Mon, 15 Oct 2018 16:55:09 +0800
-Subject: [PATCH] avoid start failure with bind user
-
-Upstream-Status: Pending
-
-Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
----
- init.d | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/init.d b/init.d
-index b2eec60..6e03936 100644
---- a/init.d
-+++ b/init.d
-@@ -57,6 +57,7 @@ case "$1" in
- 	modprobe capability >/dev/null 2>&1 || true
- 	if [ ! -f /etc/bind/rndc.key ]; then
- 	    /usr/sbin/rndc-confgen -a -b 512 -r /dev/urandom
-+	    chown root:bind /etc/bind/rndc.key >/dev/null 2>&1 || true
- 	    chmod 0640 /etc/bind/rndc.key
- 	fi
- 	if [ -f /var/run/named/named.pid ]; then
--- 
-2.7.4
-

meta-arm-autonomy/recipes-connectivity/bind/bind/0001-configure.in-remove-useless-L-use_openssl-lib.patch

@@ -1,30 +0,0 @@
-From 2325a92f1896a2a7f586611686801b41fbc91b50 Mon Sep 17 00:00:00 2001
-From: Hongxu Jia <hongxu.jia@windriver.com>
-Date: Mon, 27 Aug 2018 15:00:51 +0800
-Subject: [PATCH] configure.in: remove useless `-L$use_openssl/lib'
-
-Since `--with-openssl=${STAGING_DIR_HOST}${prefix}' is used in bind recipe,
-the `-L$use_openssl/lib' has a hardcoded suffix, removing it is harmless
-and helpful for clean up host build path in isc-config.sh
-
-Upstream-Status: Inappropriate [oe-core specific]
-
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
-
----
- configure.ac | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/configure.ac b/configure.ac
-index e85a5c6..2bbfc58 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -1631,7 +1631,7 @@ If you don't want OpenSSL, use --without-openssl])
- 				fi
- 				;;
- 			*)
--				DST_OPENSSL_LIBS="-L$use_openssl/lib -lcrypto"
-+				DST_OPENSSL_LIBS="-lcrypto"
- 				;;
- 			esac
- 		fi

meta-arm-autonomy/recipes-connectivity/bind/bind/0001-named-lwresd-V-and-start-log-hide-build-options.patch

@@ -1,34 +0,0 @@
-From a3af4a405baf5ff582e82aaba392dd9667d94bdc Mon Sep 17 00:00:00 2001
-From: Hongxu Jia <hongxu.jia@windriver.com>
-Date: Mon, 27 Aug 2018 21:24:20 +0800
-Subject: [PATCH] `named/lwresd -V' and start log hide build options
-
-The build options expose build path directories, so hide them.
-[snip]
-$ named -V
-|built by make with *** (options are hidden)
-[snip]
-
-Upstream-Status: Inappropriate [oe-core specific]
-
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
----
- bin/named/include/named/globals.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/bin/named/include/named/globals.h b/bin/named/include/named/globals.h
-index ba3457e..7741da7 100644
---- a/bin/named/include/named/globals.h
-+++ b/bin/named/include/named/globals.h
-@@ -68,7 +68,7 @@ EXTERN const char *		ns_g_version		INIT(VERSION);
- EXTERN const char *		ns_g_product		INIT(PRODUCT);
- EXTERN const char *		ns_g_description	INIT(DESCRIPTION);
- EXTERN const char *		ns_g_srcid		INIT(SRCID);
--EXTERN const char *		ns_g_configargs		INIT(CONFIGARGS);
-+EXTERN const char *		ns_g_configargs		INIT("*** (options are hidden)");
- EXTERN const char *		ns_g_builder		INIT(BUILDER);
- EXTERN in_port_t		ns_g_port		INIT(0);
- EXTERN isc_dscp_t		ns_g_dscp		INIT(-1);
--- 
-2.7.4
-

meta-arm-autonomy/recipes-connectivity/bind/bind/bind-ensure-searching-for-json-headers-searches-sysr.patch

@@ -1,47 +0,0 @@
-From edda20fb5a6e88548f85e39d34d6c074306e15bc Mon Sep 17 00:00:00 2001
-From: Paul Gortmaker <paul.gortmaker@windriver.com>
-Date: Tue, 9 Jun 2015 11:22:00 -0400
-Subject: [PATCH] bind: ensure searching for json headers searches sysroot
-
-Bind can fail configure by detecting headers w/o libs[1], or
-it can fail the host contamination check as per below:
-
-ERROR: This autoconf log indicates errors, it looked at host include and/or library paths while determining system capabilities.
-Rerun configure task after fixing this. The path was 'build/tmp/work/core2-64-poky-linux/bind/9.10.2-r1/build'
-ERROR: Function failed: do_qa_configure
-ERROR: Logfile of failure stored in: build/tmp/work/core2-64-poky-linux/bind/9.10.2-r1/temp/log.do_configure.5242
-ERROR: Task 5 (meta/recipes-connectivity/bind/bind_9.10.2.bb, do_configure) failed with exit code '1'
-NOTE: Tasks Summary: Attempted 773 tasks of which 768 didn't need to be rerun and 1 failed.
-No currently running tasks (773 of 781)
-
-Summary: 1 task failed:
-  /meta/recipes-connectivity/bind/bind_9.10.2.bb, do_configure
-
-One way to fix it would be to unconditionally disable json in bind
-configure[2] but here we fix it by using the path to where we would
-put the header if we had json in the sysroot, in case someone wants
-to make use of the combination some day.
-
-[1] https://trac.macports.org/ticket/45305
-[2] https://trac.macports.org/changeset/126406
-
-Upstream-Status: Inappropriate [OE Specific]
-Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
-
----
- configure.ac | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/configure.ac b/configure.ac
-index 17392fd..e85a5c6 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -2449,7 +2449,7 @@ case "$use_libjson" in
- 		libjson_libs=""
- 		;;
- 	auto|yes)
--		for d in /usr /usr/local /opt/local
-+		for d in "${STAGING_INCDIR}"
- 		do
- 			if test -f "${d}/include/json/json.h"
- 			then

meta-arm-autonomy/recipes-connectivity/bind/bind/bind9

@@ -1,2 +0,0 @@
-# startup options for the server
-OPTIONS="-u bind"

meta-arm-autonomy/recipes-connectivity/bind/bind/conf.patch

@@ -1,330 +0,0 @@
-Upstream-Status: Inappropriate [configuration]
-
-the patch is imported from openembedded project
-
-11/30/2010 - Qing He <qing.he@intel.com>
-
-diff -urN bind-9.3.1.orig/conf/db.0 bind-9.3.1/conf/db.0
---- bind-9.3.1.orig/conf/db.0	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/db.0	2005-07-10 22:14:00.000000000 +0200
-@@ -0,0 +1,12 @@
-+;
-+; BIND reverse data file for broadcast zone
-+;
-+$TTL	604800
-+@	IN	SOA	localhost. root.localhost. (
-+			      1		; Serial
-+			 604800		; Refresh
-+			  86400		; Retry
-+			2419200		; Expire
-+			 604800 )	; Negative Cache TTL
-+;
-+@	IN	NS	localhost.
-diff -urN bind-9.3.1.orig/conf/db.127 bind-9.3.1/conf/db.127
---- bind-9.3.1.orig/conf/db.127	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/db.127	2005-07-10 22:14:00.000000000 +0200
-@@ -0,0 +1,13 @@
-+;
-+; BIND reverse data file for local loopback interface
-+;
-+$TTL	604800
-+@	IN	SOA	localhost. root.localhost. (
-+			      1		; Serial
-+			 604800		; Refresh
-+			  86400		; Retry
-+			2419200		; Expire
-+			 604800 )	; Negative Cache TTL
-+;
-+@	IN	NS	localhost.
-+1.0.0	IN	PTR	localhost.
-diff -urN bind-9.3.1.orig/conf/db.empty bind-9.3.1/conf/db.empty
---- bind-9.3.1.orig/conf/db.empty	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/db.empty	2005-07-10 22:14:00.000000000 +0200
-@@ -0,0 +1,14 @@
-+; BIND reverse data file for empty rfc1918 zone
-+;
-+; DO NOT EDIT THIS FILE - it is used for multiple zones.
-+; Instead, copy it, edit named.conf, and use that copy.
-+;
-+$TTL	86400
-+@	IN	SOA	localhost. root.localhost. (
-+			      1		; Serial
-+			 604800		; Refresh
-+			  86400		; Retry
-+			2419200		; Expire
-+			  86400 )	; Negative Cache TTL
-+;
-+@	IN	NS	localhost.
-diff -urN bind-9.3.1.orig/conf/db.255 bind-9.3.1/conf/db.255
---- bind-9.3.1.orig/conf/db.255	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/db.255	2005-07-10 22:14:00.000000000 +0200
-@@ -0,0 +1,12 @@
-+;
-+; BIND reserve data file for broadcast zone
-+;
-+$TTL	604800
-+@	IN	SOA	localhost. root.localhost. (
-+			      1		; Serial
-+			 604800		; Refresh
-+			  86400		; Retry
-+			2419200		; Expire
-+			 604800 )	; Negative Cache TTL
-+;
-+@	IN	NS	localhost.
-diff -urN bind-9.3.1.orig/conf/db.local bind-9.3.1/conf/db.local
---- bind-9.3.1.orig/conf/db.local	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/db.local	2005-07-10 22:14:00.000000000 +0200
-@@ -0,0 +1,13 @@
-+;
-+; BIND data file for local loopback interface
-+;
-+$TTL	604800
-+@	IN	SOA	localhost. root.localhost. (
-+			      1		; Serial
-+			 604800		; Refresh
-+			  86400		; Retry
-+			2419200		; Expire
-+			 604800 )	; Negative Cache TTL
-+;
-+@	IN	NS	localhost.
-+@	IN	A	127.0.0.1
-diff -urN bind-9.3.1.orig/conf/db.root bind-9.3.1/conf/db.root
---- bind-9.3.1.orig/conf/db.root	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/db.root	2005-07-10 22:14:00.000000000 +0200
-@@ -0,0 +1,45 @@
-+
-+; <<>> DiG 9.2.3 <<>> ns . @a.root-servers.net.
-+;; global options:  printcmd
-+;; Got answer:
-+;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 18944
-+;; flags: qr aa rd; QUERY: 1, ANSWER: 13, AUTHORITY: 0, ADDITIONAL: 13
-+
-+;; QUESTION SECTION:
-+;.				IN	NS
-+
-+;; ANSWER SECTION:
-+.			518400	IN	NS	A.ROOT-SERVERS.NET.
-+.			518400	IN	NS	B.ROOT-SERVERS.NET.
-+.			518400	IN	NS	C.ROOT-SERVERS.NET.
-+.			518400	IN	NS	D.ROOT-SERVERS.NET.
-+.			518400	IN	NS	E.ROOT-SERVERS.NET.
-+.			518400	IN	NS	F.ROOT-SERVERS.NET.
-+.			518400	IN	NS	G.ROOT-SERVERS.NET.
-+.			518400	IN	NS	H.ROOT-SERVERS.NET.
-+.			518400	IN	NS	I.ROOT-SERVERS.NET.
-+.			518400	IN	NS	J.ROOT-SERVERS.NET.
-+.			518400	IN	NS	K.ROOT-SERVERS.NET.
-+.			518400	IN	NS	L.ROOT-SERVERS.NET.
-+.			518400	IN	NS	M.ROOT-SERVERS.NET.
-+
-+;; ADDITIONAL SECTION:
-+A.ROOT-SERVERS.NET.	3600000	IN	A	198.41.0.4
-+B.ROOT-SERVERS.NET.	3600000	IN	A	192.228.79.201
-+C.ROOT-SERVERS.NET.	3600000	IN	A	192.33.4.12
-+D.ROOT-SERVERS.NET.	3600000	IN	A	128.8.10.90
-+E.ROOT-SERVERS.NET.	3600000	IN	A	192.203.230.10
-+F.ROOT-SERVERS.NET.	3600000	IN	A	192.5.5.241
-+G.ROOT-SERVERS.NET.	3600000	IN	A	192.112.36.4
-+H.ROOT-SERVERS.NET.	3600000	IN	A	128.63.2.53
-+I.ROOT-SERVERS.NET.	3600000	IN	A	192.36.148.17
-+J.ROOT-SERVERS.NET.	3600000	IN	A	192.58.128.30
-+K.ROOT-SERVERS.NET.	3600000	IN	A	193.0.14.129
-+L.ROOT-SERVERS.NET.	3600000	IN	A	198.32.64.12
-+M.ROOT-SERVERS.NET.	3600000	IN	A	202.12.27.33
-+
-+;; Query time: 81 msec
-+;; SERVER: 198.41.0.4#53(a.root-servers.net.)
-+;; WHEN: Sun Feb  1 11:27:14 2004
-+;; MSG SIZE  rcvd: 436
-+
-diff -urN bind-9.3.1.orig/conf/named.conf bind-9.3.1/conf/named.conf
---- bind-9.3.1.orig/conf/named.conf	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/named.conf	2005-07-10 22:33:46.000000000 +0200
-@@ -0,0 +1,49 @@
-+// This is the primary configuration file for the BIND DNS server named.
-+//
-+// If you are just adding zones, please do that in /etc/bind/named.conf.local
-+
-+include "/etc/bind/named.conf.options";
-+
-+// prime the server with knowledge of the root servers
-+zone "." {
-+	type hint;
-+	file "/etc/bind/db.root";
-+};
-+
-+// be authoritative for the localhost forward and reverse zones, and for
-+// broadcast zones as per RFC 1912
-+
-+zone "localhost" {
-+	type master;
-+	file "/etc/bind/db.local";
-+};
-+
-+zone "127.in-addr.arpa" {
-+	type master;
-+	file "/etc/bind/db.127";
-+};
-+
-+zone "0.in-addr.arpa" {
-+	type master;
-+	file "/etc/bind/db.0";
-+};
-+
-+zone "255.in-addr.arpa" {
-+	type master;
-+	file "/etc/bind/db.255";
-+};
-+
-+// zone "com" { type delegation-only; };
-+// zone "net" { type delegation-only; };
-+
-+// From the release notes:
-+//  Because many of our users are uncomfortable receiving undelegated answers
-+//  from root or top level domains, other than a few for whom that behaviour
-+//  has been trusted and expected for quite some length of time, we have now
-+//  introduced the "root-delegations-only" feature which applies delegation-only
-+//  logic to all top level domains, and to the root domain.  An exception list
-+//  should be specified, including "MUSEUM" and "DE", and any other top level
-+//  domains from whom undelegated responses are expected and trusted.
-+// root-delegation-only exclude { "DE"; "MUSEUM"; };
-+
-+include "/etc/bind/named.conf.local";
-diff -urN bind-9.3.1.orig/conf/named.conf.local bind-9.3.1/conf/named.conf.local
---- bind-9.3.1.orig/conf/named.conf.local	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/named.conf.local	2005-07-10 22:14:06.000000000 +0200
-@@ -0,0 +1,8 @@
-+//
-+// Do any local configuration here
-+//
-+
-+// Consider adding the 1918 zones here, if they are not used in your
-+// organization
-+//include "/etc/bind/zones.rfc1918";
-+
-diff -urN bind-9.3.1.orig/conf/named.conf.options bind-9.3.1/conf/named.conf.options
---- bind-9.3.1.orig/conf/named.conf.options	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/named.conf.options	2005-07-10 22:14:06.000000000 +0200
-@@ -0,0 +1,24 @@
-+options {
-+	directory "/var/cache/bind";
-+
-+	// If there is a firewall between you and nameservers you want
-+	// to talk to, you might need to uncomment the query-source
-+	// directive below.  Previous versions of BIND always asked
-+	// questions using port 53, but BIND 8.1 and later use an unprivileged
-+	// port by default.
-+
-+	// query-source address * port 53;
-+
-+	// If your ISP provided one or more IP addresses for stable 
-+	// nameservers, you probably want to use them as forwarders.  
-+	// Uncomment the following block, and insert the addresses replacing 
-+	// the all-0's placeholder.
-+
-+	// forwarders {
-+	// 	0.0.0.0;
-+	// };
-+
-+	auth-nxdomain no;    # conform to RFC1035
-+
-+};
-+
-diff -urN bind-9.3.1.orig/conf/zones.rfc1918 bind-9.3.1/conf/zones.rfc1918
---- bind-9.3.1.orig/conf/zones.rfc1918	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/conf/zones.rfc1918	2005-07-10 22:14:10.000000000 +0200
-@@ -0,0 +1,20 @@
-+zone "10.in-addr.arpa"      { type master; file "/etc/bind/db.empty"; };
-+ 
-+zone "16.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "17.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "18.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "19.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "20.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "21.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "22.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "23.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "24.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "25.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "26.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "27.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "28.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "29.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "30.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+zone "31.172.in-addr.arpa"  { type master; file "/etc/bind/db.empty"; };
-+
-+zone "168.192.in-addr.arpa" { type master; file "/etc/bind/db.empty"; };
-diff -urN bind-9.3.1.orig/init.d bind-9.3.1/init.d
---- bind-9.3.1.orig/init.d	1970-01-01 01:00:00.000000000 +0100
-+++ bind-9.3.1/init.d	2005-07-10 23:09:58.000000000 +0200
-@@ -0,0 +1,70 @@
-+#!/bin/sh
-+
-+PATH=/sbin:/bin:/usr/sbin:/usr/bin
-+
-+# for a chrooted server: "-u bind -t /var/lib/named"
-+# Don't modify this line, change or create /etc/default/bind9.
-+OPTIONS=""
-+
-+test -f /etc/default/bind9 && . /etc/default/bind9
-+
-+test -x /usr/sbin/rndc || exit 0
-+
-+case "$1" in
-+    start)
-+	echo -n "Starting domain name service: named"
-+
-+	modprobe capability >/dev/null 2>&1 || true
-+	if [ ! -f /etc/bind/rndc.key ]; then
-+	    /usr/sbin/rndc-confgen -a -b 512 -r /dev/urandom
-+	    chmod 0640 /etc/bind/rndc.key
-+	fi
-+	if [ -f /var/run/named/named.pid ]; then
-+	    ps `cat /var/run/named/named.pid` > /dev/null && exit 1
-+	fi
-+
-+	# dirs under /var/run can go away on reboots.
-+	mkdir -p /var/run/named
-+	mkdir -p /var/cache/bind
-+	chmod 775 /var/run/named
-+	chown root:bind /var/run/named >/dev/null 2>&1 || true
-+
-+	if [ ! -x /usr/sbin/named ]; then
-+	    echo "named binary missing - not starting"
-+	    exit 1
-+	fi
-+	if start-stop-daemon --start --quiet --exec /usr/sbin/named \
-+		--pidfile /var/run/named/named.pid -- $OPTIONS; then
-+	    if [ -x /sbin/resolvconf ] ; then
-+		echo "nameserver 127.0.0.1" | /sbin/resolvconf -a lo
-+	    fi
-+	fi
-+	echo "."	
-+    ;;
-+
-+    stop)
-+	echo -n "Stopping domain name service: named"
-+	if [ -x /sbin/resolvconf ]; then
-+	    /sbin/resolvconf -d lo
-+	fi
-+	/usr/sbin/rndc stop >/dev/null 2>&1
-+	echo "."	
-+    ;;
-+
-+    reload)
-+	/usr/sbin/rndc reload
-+    ;;
-+
-+    restart|force-reload)
-+	$0 stop
-+	sleep 2
-+	$0 start
-+    ;;
-+    
-+    *)
-+	echo "Usage: /etc/init.d/bind {start|stop|reload|restart|force-reload}" >&2
-+	exit 1
-+    ;;
-+esac
-+
-+exit 0

meta-arm-autonomy/recipes-connectivity/bind/bind/generate-rndc-key.sh

@@ -1,8 +0,0 @@
-#!/bin/sh
-
-if [ ! -s /etc/bind/rndc.key ]; then
-    echo -n "Generating /etc/bind/rndc.key:"
-    /usr/sbin/rndc-confgen -a -b 512 -r /dev/urandom
-    chown root:bind /etc/bind/rndc.key
-    chmod 0640 /etc/bind/rndc.key
-fi

meta-arm-autonomy/recipes-connectivity/bind/bind/init.d-add-support-for-read-only-rootfs.patch

@@ -1,65 +0,0 @@
-Subject: init.d: add support for read-only rootfs
-
-Upstream-Status: Inappropriate [oe specific]
-
-Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
----
- init.d |   40 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 40 insertions(+)
-
-diff --git a/init.d b/init.d
-index 0111ed4..24677c8 100644
---- a/init.d
-+++ b/init.d
-@@ -6,8 +6,48 @@ PATH=/sbin:/bin:/usr/sbin:/usr/bin
- # Don't modify this line, change or create /etc/default/bind9.
- OPTIONS=""
- 
-+test -f /etc/default/rcS && . /etc/default/rcS
- test -f /etc/default/bind9 && . /etc/default/bind9
- 
-+# This function is here because it's possible that /var and / are on different partitions.
-+is_on_read_only_partition () {
-+    DIRECTORY=$1
-+    dir=`readlink -f $DIRECTORY`
-+    while true; do
-+	if [ ! -d "$dir" ]; then
-+	    echo "ERROR: $dir is not a directory"
-+	    exit 1
-+	else
-+	    for flag in `awk -v dir=$dir '{ if ($2 == dir) { print "FOUND"; split($4,FLAGS,",") } }; \
-+		END { for (f in FLAGS) print FLAGS[f] }' < /proc/mounts`; do
-+		[ "$flag" = "FOUND" ] && partition="read-write"
-+		[ "$flag" = "ro" ] && { partition="read-only"; break; }
-+	    done
-+	    if [ "$dir" = "/" -o -n "$partition" ]; then
-+		break
-+	    else
-+		dir=`dirname $dir`
-+	    fi
-+	fi
-+    done
-+    [ "$partition" = "read-only" ] && echo "yes" || echo "no"
-+}
-+
-+bind_mount () {
-+    olddir=$1
-+    newdir=$2
-+    mkdir -p $olddir
-+    cp -a $newdir/* $olddir
-+    mount --bind $olddir $newdir
-+}
-+
-+# Deal with read-only rootfs
-+if [ "$ROOTFS_READ_ONLY" = "yes" ]; then
-+    [ "$VERBOSE" != "no" ] && echo "WARN: start bind service in read-only rootfs"
-+    [ `is_on_read_only_partition /etc/bind` = "yes" ] && bind_mount /var/volatile/bind/etc /etc/bind
-+    [ `is_on_read_only_partition /var/named` = "yes" ] && bind_mount /var/volatile/bind/named /var/named
-+fi
-+
- test -x /usr/sbin/rndc || exit 0
- 
- case "$1" in
--- 
-1.7.9.5
-

meta-arm-autonomy/recipes-connectivity/bind/bind/make-etc-initd-bind-stop-work.patch

@@ -1,42 +0,0 @@
-bind: make "/etc/init.d/bind stop" work
-
-Upstream-Status: Inappropriate [configuration]
-
-Add some configurations, make rndc command be able to controls
-the named daemon.
-
-Signed-off-by: Roy Li <rongqing.li@windriver.com>
----
- conf/named.conf |    5 +++++
- conf/rndc.conf  |    5 +++++
- 2 files changed, 10 insertions(+), 0 deletions(-)
- create mode 100644 conf/rndc.conf
-
-diff --git a/conf/named.conf b/conf/named.conf
-index 95829cf..c8899e7 100644
---- a/conf/named.conf
-+++ b/conf/named.conf
-@@ -47,3 +47,8 @@ zone "255.in-addr.arpa" {
- // root-delegation-only exclude { "DE"; "MUSEUM"; };
- 
- include "/etc/bind/named.conf.local";
-+include "/etc/bind/rndc.key" ;
-+controls {
-+	inet 127.0.0.1 allow { localhost; }
-+	keys { rndc-key; };
-+};
-diff --git a/conf/rndc.conf b/conf/rndc.conf
-new file mode 100644
-index 0000000..a0b481d
---- /dev/null
-+++ b/conf/rndc.conf
-@@ -0,0 +1,5 @@
-+include "/etc/bind/rndc.key";
-+options {
-+	default-server  localhost;
-+	default-key     rndc-key;
-+};
-
--- 
-1.7.5.4
-

meta-arm-autonomy/recipes-connectivity/bind/bind/named.service

@@ -1,22 +0,0 @@
-[Unit]
-Description=Berkeley Internet Name Domain (DNS)
-Wants=nss-lookup.target
-Before=nss-lookup.target
-After=network.target
-
-[Service]
-Type=forking
-EnvironmentFile=-/etc/default/bind9
-PIDFile=/run/named/named.pid
-
-ExecStartPre=@SBINDIR@/generate-rndc-key.sh
-ExecStart=@SBINDIR@/named $OPTIONS
-
-ExecReload=@BASE_BINDIR@/sh -c '@SBINDIR@/rndc reload > /dev/null 2>&1 || @BASE_BINDIR@/kill -HUP $MAINPID'
-
-ExecStop=@BASE_BINDIR@/sh -c '@SBINDIR@/rndc stop > /dev/null 2>&1 || @BASE_BINDIR@/kill -TERM $MAINPID'
-
-PrivateTmp=true
-
-[Install]
-WantedBy=multi-user.target

meta-arm-autonomy/recipes-connectivity/bind/bind_9.11.22.bb

@@ -1,140 +0,0 @@
-SUMMARY = "ISC Internet Domain Name Server"
-HOMEPAGE = "http://www.isc.org/sw/bind/"
-SECTION = "console/network"
-
-LICENSE = "ISC & BSD"
-LIC_FILES_CHKSUM = "file://COPYRIGHT;md5=bf39058a7f64b2a934ce14dc9ec1dd45"
-
-DEPENDS = "openssl libcap zlib"
-
-SRC_URI = "https://ftp.isc.org/isc/bind9/${PV}/${BPN}-${PV}.tar.gz \
-           file://conf.patch \
-           file://named.service \
-           file://bind9 \
-           file://generate-rndc-key.sh \
-           file://make-etc-initd-bind-stop-work.patch \
-           file://init.d-add-support-for-read-only-rootfs.patch \
-           file://bind-ensure-searching-for-json-headers-searches-sysr.patch \
-           file://0001-configure.in-remove-useless-L-use_openssl-lib.patch \
-           file://0001-named-lwresd-V-and-start-log-hide-build-options.patch \
-           file://0001-avoid-start-failure-with-bind-user.patch \
-           "
-
-SRC_URI[sha256sum] = "afc6d8015006f1cabf699ff19f517bb8fd9c1811e5231f26baf51c3550262ac9"
-
-UPSTREAM_CHECK_URI = "https://ftp.isc.org/isc/bind9/"
-# stay at 9.11 until 9.16, from 9.16 follow the ESV versions divisible by 4
-UPSTREAM_CHECK_REGEX = "(?P<pver>9.(11|16|20|24|28)(\.\d+)+(-P\d+)*)/"
-
-# BIND >= 9.11.2 need dhcpd >= 4.4.0,
-# don't report it here since dhcpd is already recent enough.
-CVE_CHECK_WHITELIST += "CVE-2019-6470"
-
-inherit autotools update-rc.d systemd useradd pkgconfig multilib_script multilib_header
-
-MULTILIB_SCRIPTS = "${PN}:${bindir}/bind9-config ${PN}:${bindir}/isc-config.sh"
-
-# PACKAGECONFIGs readline and libedit should NOT be set at same time
-PACKAGECONFIG ?= "readline"
-PACKAGECONFIG[httpstats] = "--with-libxml2=${STAGING_DIR_HOST}${prefix},--without-libxml2,libxml2"
-PACKAGECONFIG[readline] = "--with-readline=-lreadline,,readline"
-PACKAGECONFIG[libedit] = "--with-readline=-ledit,,libedit"
-PACKAGECONFIG[urandom] = "--with-randomdev=/dev/urandom,--with-randomdev=/dev/random,,"
-PACKAGECONFIG[python3] = "--with-python=yes --with-python-install-dir=${PYTHON_SITEPACKAGES_DIR} , --without-python, python3-ply-native,"
-
-ENABLE_IPV6 = "--enable-ipv6=${@bb.utils.contains('DISTRO_FEATURES', 'ipv6', 'yes', 'no', d)}"
-EXTRA_OECONF = " ${ENABLE_IPV6} --with-libtool --enable-threads \
-                 --disable-devpoll --enable-epoll --with-gost=no \
-                 --with-gssapi=no --with-ecdsa=yes --with-eddsa=no \
-                 --with-lmdb=no \
-                 --sysconfdir=${sysconfdir}/bind \
-                 --with-openssl=${STAGING_DIR_HOST}${prefix} \
-               "
-
-inherit ${@bb.utils.contains('PACKAGECONFIG', 'python3', 'python3native distutils3-base', '', d)}
-
-# dhcp needs .la so keep them
-REMOVE_LIBTOOL_LA = "0"
-
-USERADD_PACKAGES = "${PN}"
-USERADD_PARAM_${PN} = "--system --home ${localstatedir}/cache/bind --no-create-home \
-                       --user-group bind"
-
-INITSCRIPT_NAME = "bind"
-INITSCRIPT_PARAMS = "defaults"
-
-SYSTEMD_SERVICE_${PN} = "named.service"
-
-do_install_prepend() {
-	# clean host path in isc-config.sh before the hardlink created
-	# by "make install":
-	#   bind9-config -> isc-config.sh
-	sed -i -e "s,${STAGING_LIBDIR},${libdir}," ${B}/isc-config.sh
-}
-
-do_install_append() {
-
-	rmdir "${D}${localstatedir}/run"
-	rmdir --ignore-fail-on-non-empty "${D}${localstatedir}"
-	install -d -o bind "${D}${localstatedir}/cache/bind"
-	install -d "${D}${sysconfdir}/bind"
-	install -d "${D}${sysconfdir}/init.d"
-	install -m 644 ${S}/conf/* "${D}${sysconfdir}/bind/"
-	install -m 755 "${S}/init.d" "${D}${sysconfdir}/init.d/bind"
-        if ${@bb.utils.contains('PACKAGECONFIG', 'python3', 'true', 'false', d)}; then
-		sed -i -e '1s,#!.*python3,#! /usr/bin/python3,' \
-		${D}${sbindir}/dnssec-coverage \
-		${D}${sbindir}/dnssec-checkds \
-		${D}${sbindir}/dnssec-keymgr
-	fi
-
-	# Install systemd related files
-	install -d ${D}${sbindir}
-	install -m 755 ${WORKDIR}/generate-rndc-key.sh ${D}${sbindir}
-	install -d ${D}${systemd_unitdir}/system
-	install -m 0644 ${WORKDIR}/named.service ${D}${systemd_unitdir}/system
-	sed -i -e 's,@BASE_BINDIR@,${base_bindir},g' \
-	       -e 's,@SBINDIR@,${sbindir},g' \
-	       ${D}${systemd_unitdir}/system/named.service
-
-	install -d ${D}${sysconfdir}/default
-	install -m 0644 ${WORKDIR}/bind9 ${D}${sysconfdir}/default
-
-	if ${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'true', 'false', d)}; then
-		install -d ${D}${sysconfdir}/tmpfiles.d
-		echo "d /run/named 0755 bind bind - -" > ${D}${sysconfdir}/tmpfiles.d/bind.conf
-	fi
-
-    oe_multilib_header isc/platform.h
-}
-
-CONFFILES_${PN} = " \
-	${sysconfdir}/bind/named.conf \
-	${sysconfdir}/bind/named.conf.local \
-	${sysconfdir}/bind/named.conf.options \
-	${sysconfdir}/bind/db.0 \
-	${sysconfdir}/bind/db.127 \
-	${sysconfdir}/bind/db.empty \
-	${sysconfdir}/bind/db.local \
-	${sysconfdir}/bind/db.root \
-	"
-
-ALTERNATIVE_${PN}-utils = "nslookup"
-ALTERNATIVE_LINK_NAME[nslookup] = "${bindir}/nslookup"
-ALTERNATIVE_PRIORITY = "100"
-
-PACKAGE_BEFORE_PN += "${PN}-utils"
-FILES_${PN}-utils = "${bindir}/host ${bindir}/dig ${bindir}/mdig ${bindir}/nslookup ${bindir}/nsupdate"
-FILES_${PN}-dev += "${bindir}/isc-config.h"
-FILES_${PN} += "${sbindir}/generate-rndc-key.sh"
-
-PACKAGE_BEFORE_PN += "${PN}-libs"
-FILES_${PN}-libs = "${libdir}/*.so*"
-FILES_${PN}-staticdev += "${libdir}/*.la"
-
-PACKAGE_BEFORE_PN += "${@bb.utils.contains('PACKAGECONFIG', 'python3', 'python3-bind', '', d)}"
-FILES_python3-bind = "${sbindir}/dnssec-coverage ${sbindir}/dnssec-checkds \
-                ${sbindir}/dnssec-keymgr ${PYTHON_SITEPACKAGES_DIR}"
-
-RDEPENDS_${PN}-dev = ""
-RDEPENDS_python3-bind = "python3-core python3-ply"

meta-arm-autonomy/recipes-connectivity/dhcp/README.md

@@ -1,3 +0,0 @@
-For now, arm-autonomy-host-image-minimal installs the dhcp-server package and
-the dchp recipe was copied from oe-core tree https://git.openembedded.org/openembedded-core/tree/meta/recipes-connectivity/dhcp?id=087e4fafeef82cfd3d71402d6b200fe831f48697
-since it got removed in the https://git.openembedded.org/openembedded-core/commit/meta/recipes-connectivity?id=7e3357892f204788162747e907d68f857118cf42 patch.

meta-arm-autonomy/recipes-connectivity/dhcp/dhcp.inc

@@ -1,149 +0,0 @@
-SECTION = "console/network"
-SUMMARY = "Internet Software Consortium DHCP package"
-DESCRIPTION = "DHCP (Dynamic Host Configuration Protocol) is a protocol \
-which allows individual devices on an IP network to get their own \
-network configuration information from a server.  DHCP helps make it \
-easier to administer devices."
-
-HOMEPAGE = "http://www.isc.org/"
-
-LICENSE = "ISC"
-LIC_FILES_CHKSUM = "file://LICENSE;beginline=4;md5=004a4db50a1e20972e924a8618747c01"
-
-DEPENDS = "openssl bind"
-
-SRC_URI = "http://ftp.isc.org/isc/dhcp/${PV}/dhcp-${PV}.tar.gz \
-           file://init-relay file://default-relay \
-           file://init-server file://default-server \
-           file://dhclient.conf file://dhcpd.conf \
-           file://dhclient-systemd-wrapper \
-           file://dhclient.service \
-           file://dhcpd.service file://dhcrelay.service \
-           file://dhcpd6.service \
-           "
-UPSTREAM_CHECK_URI = "http://ftp.isc.org/isc/dhcp/"
-UPSTREAM_CHECK_REGEX = "(?P<pver>\d+\.\d+\.(\d+?))/"
-
-inherit autotools-brokensep systemd useradd update-rc.d
-
-USERADD_PACKAGES = "${PN}-server"
-USERADD_PARAM_${PN}-server = "--system --no-create-home --home-dir /var/run/${BPN} --shell /bin/false --user-group ${BPN}"
-
-SYSTEMD_PACKAGES = "${PN}-server ${PN}-relay ${PN}-client"
-SYSTEMD_SERVICE_${PN}-server = "dhcpd.service dhcpd6.service"
-SYSTEMD_AUTO_ENABLE_${PN}-server = "disable"
-
-SYSTEMD_SERVICE_${PN}-relay = "dhcrelay.service"
-SYSTEMD_AUTO_ENABLE_${PN}-relay = "disable"
-
-SYSTEMD_SERVICE_${PN}-client = "dhclient.service"
-SYSTEMD_AUTO_ENABLE_${PN}-client = "disable"
-
-INITSCRIPT_PACKAGES = "dhcp-server"
-INITSCRIPT_NAME_dhcp-server = "dhcp-server"
-INITSCRIPT_PARAMS_dhcp-server = "defaults"
-
-CFLAGS += "-D_GNU_SOURCE"
-EXTRA_OECONF = "--with-srv-lease-file=${localstatedir}/lib/dhcp/dhcpd.leases \
-                --with-srv6-lease-file=${localstatedir}/lib/dhcp/dhcpd6.leases \
-                --with-cli-lease-file=${localstatedir}/lib/dhcp/dhclient.leases \
-                --with-cli6-lease-file=${localstatedir}/lib/dhcp/dhclient6.leases \
-                --enable-paranoia --disable-static \
-                --with-randomdev=/dev/random \
-                --with-libbind=${STAGING_DIR_HOST} \
-		--enable-libtool \
-               "
-
-#Enable shared libs per dhcp README
-do_configure_prepend () {
-	cp configure.ac+lt configure.ac
-}
-
-do_install_append () {
-	install -d ${D}${sysconfdir}/init.d
-	install -d ${D}${sysconfdir}/default
-	install -d ${D}${sysconfdir}/dhcp
-	install -m 0755 ${WORKDIR}/init-relay ${D}${sysconfdir}/init.d/dhcp-relay
-	install -m 0644 ${WORKDIR}/default-relay ${D}${sysconfdir}/default/dhcp-relay
-	install -m 0755 ${WORKDIR}/init-server ${D}${sysconfdir}/init.d/dhcp-server
-	install -m 0644 ${WORKDIR}/default-server ${D}${sysconfdir}/default/dhcp-server
-
-	rm -f ${D}${sysconfdir}/dhclient.conf*
-	rm -f ${D}${sysconfdir}/dhcpd.conf*
-	install -m 0644 ${WORKDIR}/dhclient.conf ${D}${sysconfdir}/dhcp/dhclient.conf
-	install -m 0644 ${WORKDIR}/dhcpd.conf ${D}${sysconfdir}/dhcp/dhcpd.conf
-
-	install -d ${D}${base_sbindir}/
-	if [ "${sbindir}" != "${base_sbindir}" ]; then
-		mv ${D}${sbindir}/dhclient ${D}${base_sbindir}/
-	fi
-	install -m 0755 ${S}/client/scripts/linux ${D}${base_sbindir}/dhclient-script
-
-	# Install systemd unit files
-	install -d ${D}${systemd_unitdir}/system
-	install -m 0644 ${WORKDIR}/dhcpd.service ${D}${systemd_unitdir}/system
-	install -m 0644 ${WORKDIR}/dhcpd6.service ${D}${systemd_unitdir}/system
-	install -m 0644 ${WORKDIR}/dhcrelay.service ${D}${systemd_unitdir}/system
-	sed -i -e 's,@SBINDIR@,${sbindir},g' ${D}${systemd_unitdir}/system/dhcpd*.service ${D}${systemd_unitdir}/system/dhcrelay.service
-	sed -i -e 's,@SYSCONFDIR@,${sysconfdir},g' ${D}${systemd_unitdir}/system/dhcpd*.service
-	sed -i -e 's,@base_bindir@,${base_bindir},g' ${D}${systemd_unitdir}/system/dhcpd*.service
-	sed -i -e 's,@localstatedir@,${localstatedir},g' ${D}${systemd_unitdir}/system/dhcpd*.service
-	sed -i -e 's,@SYSCONFDIR@,${sysconfdir},g' ${D}${systemd_unitdir}/system/dhcrelay.service
-
-	install -d ${D}${base_sbindir}
-	install -m 0755 ${WORKDIR}/dhclient-systemd-wrapper ${D}${base_sbindir}/dhclient-systemd-wrapper
-	install -m 0644 ${WORKDIR}/dhclient.service ${D}${systemd_unitdir}/system
-	sed -i -e 's,@SYSCONFDIR@,${sysconfdir},g' ${D}${systemd_unitdir}/system/dhclient.service
-	sed -i -e 's,@BASE_SBINDIR@,${base_sbindir},g' ${D}${systemd_unitdir}/system/dhclient.service
-}
-
-PACKAGES += "dhcp-libs dhcp-server dhcp-server-config dhcp-client dhcp-relay dhcp-omshell"
-
-PACKAGES_remove = "${PN}"
-RDEPENDS_${PN}-client += "${@bb.utils.contains('DISTRO_FEATURES', 'systemd', 'iproute2', '', d)}"
-RDEPENDS_${PN}-dev = ""
-RDEPENDS_${PN}-staticdev = ""
-FILES_${PN}-libs = "${libdir}/libdhcpctl.so.0* ${libdir}/libomapi.so.0* ${libdir}/libdhcp.so.0*"
-
-FILES_${PN}-server = "${sbindir}/dhcpd ${sysconfdir}/init.d/dhcp-server"
-RRECOMMENDS_${PN}-server = "dhcp-server-config"
-
-FILES_${PN}-server-config = "${sysconfdir}/default/dhcp-server ${sysconfdir}/dhcp/dhcpd.conf"
-
-FILES_${PN}-relay = "${sbindir}/dhcrelay ${sysconfdir}/init.d/dhcp-relay ${sysconfdir}/default/dhcp-relay"
-
-FILES_${PN}-client = "${base_sbindir}/dhclient \
-                      ${base_sbindir}/dhclient-script \
-                      ${sysconfdir}/dhcp/dhclient.conf \
-                      ${base_sbindir}/dhclient-systemd-wrapper \
-                     "
-
-FILES_${PN}-omshell = "${bindir}/omshell"
-
-pkg_postinst_dhcp-server() {
-    mkdir -p $D/${localstatedir}/lib/dhcp
-    touch $D/${localstatedir}/lib/dhcp/dhcpd.leases
-    touch $D/${localstatedir}/lib/dhcp/dhcpd6.leases
-}
-
-pkg_postinst_dhcp-client() {
-    mkdir -p $D/${localstatedir}/lib/dhcp
-}
-
-pkg_postrm_dhcp-server() {
-    rm -f $D/${localstatedir}/lib/dhcp/dhcpd.leases
-    rm -f $D/${localstatedir}/lib/dhcp/dhcpd6.leases
-
-    if ! rmdir $D/${localstatedir}/lib/dhcp 2>/dev/null; then
-        echo "Not removing ${localstatedir}/lib/dhcp as it is non-empty."
-    fi
-}
-
-pkg_postrm_dhcp-client() {
-    rm -f $D/${localstatedir}/lib/dhcp/dhclient.leases
-    rm -f $D/${localstatedir}/lib/dhcp/dhclient6.leases
-
-    if ! rmdir $D/${localstatedir}/lib/dhcp 2>/dev/null; then
-        echo "Not removing ${localstatedir}/lib/dhcp as it is non-empty."
-    fi
-}

meta-arm-autonomy/recipes-connectivity/dhcp/dhcp/0001-define-macro-_PATH_DHCPD_CONF-and-_PATH_DHCLIENT_CON.patch

@@ -1,27 +0,0 @@
-From 7cc29144535a622fc671dc86eb1da65b0473a7c4 Mon Sep 17 00:00:00 2001
-From: Hongxu Jia <hongxu.jia@windriver.com>
-Date: Tue, 15 Aug 2017 16:14:22 +0800
-Subject: [PATCH 01/11] define macro _PATH_DHCPD_CONF and _PATH_DHCLIENT_CONF
-
-Upstream-Status: Inappropriate [OE specific]
-
-Rebase to 4.3.6
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
----
- includes/site.h | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-Index: dhcp-4.4.1/includes/site.h
-===================================================================
---- dhcp-4.4.1.orig/includes/site.h
-+++ dhcp-4.4.1/includes/site.h
-@@ -148,7 +148,8 @@
- /* Define this if you want the dhcpd.conf file to go somewhere other than
-    the default location.   By default, it goes in /etc/dhcpd.conf. */
- 
--/* #define _PATH_DHCPD_CONF	"/etc/dhcpd.conf" */
-+#define _PATH_DHCPD_CONF	"/etc/dhcp/dhcpd.conf"
-+#define _PATH_DHCLIENT_CONF	"/etc/dhcp/dhclient.conf"
- 
- /* Network API definitions.   You do not need to choose one of these - if
-    you don't choose, one will be chosen for you in your system's config

meta-arm-autonomy/recipes-connectivity/dhcp/dhcp/0001-workaround-busybox-limitation-in-linux-dhclient-script.patch

@@ -1,65 +0,0 @@
-From eec0503cfc36f63d777f5cb3f2719cecedcb8468 Mon Sep 17 00:00:00 2001
-From: Haris Okanovic <haris.okanovic@ni.com>
-Date: Mon, 7 Jan 2019 13:22:09 -0600
-Subject: [PATCH] Workaround busybox limitation in Linux dhclient-script
-
-Busybox is a lightweight implementation of coreutils commonly used on
-space-constrained embedded Linux distributions. It's implementation of
-chown and chmod doesn't provide a "--reference" option added to
-client/scripts/linux as of commit 9261cb14. This change works around
-that limitation by using stat to read ownership and permissions flags
-and simple chown/chmod calls supported in both coreutils and busybox.
-
-    modified:   client/scripts/linux
-
-Signed-off-by: Haris Okanovic <haris.okanovic@ni.com>
-Upstream-Status: Pending [ISC-Bugs #48771]
----
- client/scripts/linux | 17 +++++++++++++----
- 1 file changed, 13 insertions(+), 4 deletions(-)
-
-diff --git a/client/scripts/linux b/client/scripts/linux
-index 0c429697..2435a44b 100755
---- a/client/scripts/linux
-+++ b/client/scripts/linux
-@@ -32,6 +32,17 @@
- # if your system holds ip tool in a non-standard location.
- ip=/sbin/ip
- 
-+chown_chmod_by_reference() {
-+    local reference_file="$1"
-+    local target_file="$2"
-+
-+    local owner=$(stat -c "%u:%g" "$reference_file")
-+    local perm=$(stat -c "%a" "$reference_file")
-+
-+    chown "$owner" "$target_file"
-+    chmod "$perm" "$target_file"
-+}
-+
- # update /etc/resolv.conf based on received values
- # This updated version mostly follows Debian script by Andrew Pollock et al.
- make_resolv_conf() {
-@@ -74,8 +85,7 @@ make_resolv_conf() {
-         fi
- 
- 	if [ -f /etc/resolv.conf ]; then
--	    chown --reference=/etc/resolv.conf $new_resolv_conf
--	    chmod --reference=/etc/resolv.conf $new_resolv_conf
-+	    chown_chmod_by_reference /etc/resolv.conf $new_resolv_conf
- 	fi
-         mv -f $new_resolv_conf /etc/resolv.conf
-     # DHCPv6
-@@ -101,8 +111,7 @@ make_resolv_conf() {
-         fi
- 
- 	if [ -f /etc/resolv.conf ]; then
--            chown --reference=/etc/resolv.conf $new_resolv_conf
--            chmod --reference=/etc/resolv.conf $new_resolv_conf
-+	    chown_chmod_by_reference /etc/resolv.conf $new_resolv_conf
- 	fi
-         mv -f $new_resolv_conf /etc/resolv.conf
-     fi
--- 
-2.20.0
-

meta-arm-autonomy/recipes-connectivity/dhcp/dhcp/0002-dhclient-dbus.patch

@@ -1,117 +0,0 @@
-From be7540d31c356e80ee02e90e8bf162b7ac6e5ba5 Mon Sep 17 00:00:00 2001
-From: Hongxu Jia <hongxu.jia@windriver.com>
-Date: Tue, 15 Aug 2017 14:56:56 +0800
-Subject: [PATCH 02/11] dhclient dbus
-
-Upstream-Status: Inappropriate [distribution]
-
-Rebase to 4.3.6
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
----
- client/scripts/bsdos   | 5 +++++
- client/scripts/freebsd | 5 +++++
- client/scripts/linux   | 5 +++++
- client/scripts/netbsd  | 5 +++++
- client/scripts/openbsd | 5 +++++
- client/scripts/solaris | 5 +++++
- 6 files changed, 30 insertions(+)
-
-diff --git a/client/scripts/bsdos b/client/scripts/bsdos
-index d69d0d8..095b143 100755
---- a/client/scripts/bsdos
-+++ b/client/scripts/bsdos
-@@ -45,6 +45,11 @@ exit_with_hooks() {
-     . /etc/dhclient-exit-hooks
-   fi
- # probably should do something with exit status of the local script
-+  if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+    dbus-send --system --dest=com.redhat.dhcp \
-+      --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+      'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+  fi
-   exit $exit_status
- }
- 
-diff --git a/client/scripts/freebsd b/client/scripts/freebsd
-index 8f3e2a2..ad7fb44 100755
---- a/client/scripts/freebsd
-+++ b/client/scripts/freebsd
-@@ -89,6 +89,11 @@ exit_with_hooks() {
-     . /etc/dhclient-exit-hooks
-   fi
- # probably should do something with exit status of the local script
-+  if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+    dbus-send --system --dest=com.redhat.dhcp \
-+      --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+      'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+  fi
-   exit $exit_status
- }
- 
-diff --git a/client/scripts/linux b/client/scripts/linux
-index 5fb1612..3d447b6 100755
---- a/client/scripts/linux
-+++ b/client/scripts/linux
-@@ -174,6 +174,11 @@ exit_with_hooks() {
-         exit_status=$?
-     fi
- 
-+    if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+        dbus-send --system --dest=com.redhat.dhcp \
-+           --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+           'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+    fi
-     exit $exit_status
- }
- 
-diff --git a/client/scripts/netbsd b/client/scripts/netbsd
-index 07383b7..aaba8e8 100755
---- a/client/scripts/netbsd
-+++ b/client/scripts/netbsd
-@@ -45,6 +45,11 @@ exit_with_hooks() {
-     . /etc/dhclient-exit-hooks
-   fi
- # probably should do something with exit status of the local script
-+  if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+    dbus-send --system --dest=com.redhat.dhcp \
-+      --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+      'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+  fi
-   exit $exit_status
- }
- 
-diff --git a/client/scripts/openbsd b/client/scripts/openbsd
-index e7f4746..56b980c 100644
---- a/client/scripts/openbsd
-+++ b/client/scripts/openbsd
-@@ -45,6 +45,11 @@ exit_with_hooks() {
-     . /etc/dhclient-exit-hooks
-   fi
- # probably should do something with exit status of the local script
-+  if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+    dbus-send --system --dest=com.redhat.dhcp \
-+      --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+      'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+  fi
-   exit $exit_status
- }
- 
-diff --git a/client/scripts/solaris b/client/scripts/solaris
-index af553b9..4a2aa69 100755
---- a/client/scripts/solaris
-+++ b/client/scripts/solaris
-@@ -26,6 +26,11 @@ exit_with_hooks() {
-     . /etc/dhclient-exit-hooks
-   fi
- # probably should do something with exit status of the local script
-+  if [ x$dhc_dbus != x -a $exit_status -eq 0 ]; then
-+    dbus-send --system --dest=com.redhat.dhcp \
-+      --type=method_call /com/redhat/dhcp/$interface com.redhat.dhcp.set \
-+      'string:'"`env | grep -Ev '^(PATH|SHLVL|_|PWD|dhc_dbus)\='`"
-+  fi
-   exit $exit_status
- }
- 
--- 
-1.8.3.1
-

meta-arm-autonomy/recipes-connectivity/dhcp/dhcp/0003-link-with-lcrypto.patch

@@ -1,35 +0,0 @@
-From d80bd792323dbd56269309f85b4506eb6b1b60e9 Mon Sep 17 00:00:00 2001
-From: Andrei Gherzan <andrei@gherzan.ro>
-Date: Tue, 15 Aug 2017 15:05:47 +0800
-Subject: [PATCH 03/11] link with lcrypto
-
-From 4.2.0 final release, -lcrypto check was removed and we compile
-static libraries
-from bind that are linked to libcrypto. This is why i added a patch in
-order to add
--lcrypto to LIBS.
-
-Upstream-Status: Pending
-Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
-
-Rebase to 4.3.6
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
----
- configure.ac | 4 ++++
- 1 file changed, 4 insertions(+)
-
-Index: dhcp-4.4.1/configure.ac
-===================================================================
---- dhcp-4.4.1.orig/configure.ac
-+++ dhcp-4.4.1/configure.ac
-@@ -612,6 +612,10 @@ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([[]],
- # Look for optional headers.
- AC_CHECK_HEADERS(sys/socket.h net/if_dl.h net/if6.h regex.h)
- 
-+# find an MD5 library
-+AC_SEARCH_LIBS(MD5_Init, [crypto])
-+AC_SEARCH_LIBS(MD5Init, [crypto])
-+
- # Solaris needs some libraries for functions
- AC_SEARCH_LIBS(socket, [socket])
- AC_SEARCH_LIBS(inet_ntoa, [nsl])

meta-arm-autonomy/recipes-connectivity/dhcp/dhcp/0004-Fix-out-of-tree-builds.patch

@@ -1,95 +0,0 @@
-From cccec0344d68dac4100b6f260ee24e7c2da9dfda Mon Sep 17 00:00:00 2001
-From: Hongxu Jia <hongxu.jia@windriver.com>
-Date: Tue, 15 Aug 2017 15:08:22 +0800
-Subject: [PATCH 04/11] Fix out of tree builds
-
-Upstream-Status: Pending
-
-RP 2013/03/21
-
-Rebase to 4.3.6
-
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
----
- client/Makefile.am  | 4 ++--
- common/Makefile.am  | 3 ++-
- dhcpctl/Makefile.am | 2 ++
- omapip/Makefile.am  | 1 +
- relay/Makefile.am   | 2 +-
- server/Makefile.am  | 2 +-
- 6 files changed, 9 insertions(+), 5 deletions(-)
-
-Index: dhcp-4.4.1/common/Makefile.am
-===================================================================
---- dhcp-4.4.1.orig/common/Makefile.am
-+++ dhcp-4.4.1/common/Makefile.am
-@@ -1,4 +1,5 @@
--AM_CPPFLAGS = -I$(top_srcdir) -DLOCALSTATEDIR='"@localstatedir@"'
-+AM_CPPFLAGS = -I$(top_srcdir)/includes -I$(top_srcdir) -DLOCALSTATEDIR='"@localstatedir@"'
-+
- AM_CFLAGS = $(LDAP_CFLAGS)
- 
- lib_LIBRARIES = libdhcp.a
-Index: dhcp-4.4.1/dhcpctl/Makefile.am
-===================================================================
---- dhcp-4.4.1.orig/dhcpctl/Makefile.am
-+++ dhcp-4.4.1/dhcpctl/Makefile.am
-@@ -3,6 +3,8 @@ BINDLIBDNSDIR=@BINDLIBDNSDIR@
- BINDLIBISCCFGDIR=@BINDLIBISCCFGDIR@
- BINDLIBISCDIR=@BINDLIBISCDIR@
- 
-+AM_CPPFLAGS = -I$(top_srcdir)/includes -I$(top_srcdir)
-+
- bin_PROGRAMS = omshell
- lib_LIBRARIES = libdhcpctl.a
- noinst_PROGRAMS = cltest
-Index: dhcp-4.4.1/server/Makefile.am
-===================================================================
---- dhcp-4.4.1.orig/server/Makefile.am
-+++ dhcp-4.4.1/server/Makefile.am
-@@ -4,7 +4,7 @@
- # production code. Sadly, we are not there yet.
- SUBDIRS = . tests
- 
--AM_CPPFLAGS = -I.. -DLOCALSTATEDIR='"@localstatedir@"'
-+AM_CPPFLAGS = -I$(top_srcdir) -DLOCALSTATEDIR='"@localstatedir@"' -I$(top_srcdir)/includes
- 
- dist_sysconf_DATA = dhcpd.conf.example
- sbin_PROGRAMS = dhcpd
-Index: dhcp-4.4.1/client/Makefile.am
-===================================================================
---- dhcp-4.4.1.orig/client/Makefile.am
-+++ dhcp-4.4.1/client/Makefile.am
-@@ -5,7 +5,7 @@
- SUBDIRS = . tests
- 
- AM_CPPFLAGS = -DCLIENT_PATH='"PATH=$(sbindir):/sbin:/bin:/usr/sbin:/usr/bin"'
--AM_CPPFLAGS += -DLOCALSTATEDIR='"$(localstatedir)"'
-+AM_CPPFLAGS += -DLOCALSTATEDIR='"$(localstatedir)"' -I$(top_srcdir)/includes
- 
- dist_sysconf_DATA = dhclient.conf.example
- sbin_PROGRAMS = dhclient
-Index: dhcp-4.4.1/omapip/Makefile.am
-===================================================================
---- dhcp-4.4.1.orig/omapip/Makefile.am
-+++ dhcp-4.4.1/omapip/Makefile.am
-@@ -2,6 +2,7 @@ BINDLIBIRSDIR=@BINDLIBIRSDIR@
- BINDLIBDNSDIR=@BINDLIBDNSDIR@
- BINDLIBISCCFGDIR=@BINDLIBISCCFGDIR@
- BINDLIBISCDIR=@BINDLIBISCDIR@
-+AM_CPPFLAGS = -I$(top_srcdir)/includes
- 
- lib_LIBRARIES = libomapi.a
- noinst_PROGRAMS = svtest
-Index: dhcp-4.4.1/relay/Makefile.am
-===================================================================
---- dhcp-4.4.1.orig/relay/Makefile.am
-+++ dhcp-4.4.1/relay/Makefile.am
-@@ -1,6 +1,6 @@
- SUBDIRS = . tests
-
--AM_CPPFLAGS = -DLOCALSTATEDIR='"@localstatedir@"'
-+AM_CPPFLAGS = -DLOCALSTATEDIR='"@localstatedir@"' -I$(top_srcdir)/includes
-
- sbin_PROGRAMS = dhcrelay
- dhcrelay_SOURCES = dhcrelay.c

meta-arm-autonomy/recipes-connectivity/dhcp/dhcp/0005-dhcp-client-fix-invoke-dhclient-script-failed-on-Rea.patch

@@ -1,36 +0,0 @@
-From 2e8ff0e4f6d39e346ea86b8c514ab4ccc78fa359 Mon Sep 17 00:00:00 2001
-From: Hongxu Jia <hongxu.jia@windriver.com>
-Date: Tue, 15 Aug 2017 15:24:14 +0800
-Subject: [PATCH 05/11] dhcp-client: fix invoke dhclient-script failed on
- Read-only file system
-
-In read-only file system, '/etc' is on the readonly partition,
-and '/etc/resolv.conf' is symlinked to a separate writable
-partition.
-
-In this situation, we create temp files 'resolv.conf.dhclient-new'
-in /tmp dir.
-
-Upstream-Status: Pending
-
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
----
- client/scripts/linux | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/client/scripts/linux b/client/scripts/linux
-index 3d447b6..3122a75 100755
---- a/client/scripts/linux
-+++ b/client/scripts/linux
-@@ -40,7 +40,7 @@ make_resolv_conf() {
-     # DHCPv4
-     if [ -n "$new_domain_search" ] || [ -n "$new_domain_name" ] ||
-        [ -n "$new_domain_name_servers" ]; then
--        new_resolv_conf=/etc/resolv.conf.dhclient-new
-+        new_resolv_conf=/tmp/resolv.conf.dhclient-new
-         rm -f $new_resolv_conf
- 
-         if [ -n "$new_domain_name" ]; then
--- 
-1.8.3.1
-

meta-arm-autonomy/recipes-connectivity/dhcp/dhcp/0007-Add-configure-argument-to-make-the-libxml2-dependenc.patch

@@ -1,62 +0,0 @@
-From 7107511fd209f08f9a96f8938041ae48f3295895 Mon Sep 17 00:00:00 2001
-From: Christopher Larson <chris_larson@mentor.com>
-Date: Tue, 15 Aug 2017 16:17:49 +0800
-Subject: [PATCH 07/11] Add configure argument to make the libxml2 dependency
- explicit and determinisitic.
-
-Upstream-Status: Pending
-
-Signed-off-by: Christopher Larson <chris_larson@mentor.com>
-
-Rebase to 4.3.6
-
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
----
- configure.ac | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-Index: dhcp-4.4.1/configure.ac
-===================================================================
---- dhcp-4.4.1.orig/configure.ac
-+++ dhcp-4.4.1/configure.ac
-@@ -642,6 +642,17 @@ if test "$have_nanosleep" = "rt"; then
- 	LIBS="-lrt $LIBS"
- fi
- 
-+AC_ARG_WITH(libxml2,
-+	AS_HELP_STRING([--with-libxml2], [link against libxml2. this is needed if bind was built with xml2 support enabled]),
-+	with_libxml2="$withval", with_libxml2="no")
-+
-+if test x$with_libxml2 != xno; then
-+	AC_SEARCH_LIBS(xmlTextWriterStartElement, [xml2],
-+		[if test x$with_libxml2 != xauto; then
-+			AC_MSG_FAILURE([*** Cannot find xmlTextWriterStartElement with -lxml2 and libxml2 was requested])
-+		fi])
-+fi
-+
- # check for /dev/random (declares HAVE_DEV_RANDOM)
- AC_MSG_CHECKING(for random device)
- AC_ARG_WITH(randomdev,
-Index: dhcp-4.4.1/configure.ac+lt
-===================================================================
---- dhcp-4.4.1.orig/configure.ac+lt
-+++ dhcp-4.4.1/configure.ac+lt
-@@ -909,6 +909,18 @@ elif test "$want_libtool" = "yes" -a "$u
- fi
- AM_CONDITIONAL(INSTALL_BIND, test "$want_install_bind" = "yes")
- 
-+AC_ARG_WITH(libxml2,
-+	AS_HELP_STRING([--with-libxml2], [link against libxml2. this is needed if bind was built with xml2 support enabled]),
-+	with_libxml2="$withval", with_libxml2="no")
-+
-+if test x$with_libxml2 != xno; then
-+	AC_SEARCH_LIBS(xmlTextWriterStartElement, [xml2],,
-+		[if test x$with_libxml2 != xauto; then
-+			AC_MSG_FAILURE([*** Cannot find xmlTextWriterStartElement with -lxml2 and libxml2 was requested])
-+		fi])
-+fi
-+
-+
- # OpenLDAP support.
- AC_ARG_WITH(ldap,
-     AS_HELP_STRING([--with-ldap],[enable OpenLDAP support in dhcpd (default is no)]),

meta-arm-autonomy/recipes-connectivity/dhcp/dhcp/0009-remove-dhclient-script-bash-dependency.patch

@@ -1,28 +0,0 @@
-From f3f8b7726e50e24ef3edf5fa5a17e31d39118d7e Mon Sep 17 00:00:00 2001
-From: Andre McCurdy <armccurdy@gmail.com>
-Date: Tue, 15 Aug 2017 15:49:31 +0800
-Subject: [PATCH 09/11] remove dhclient-script bash dependency
-
-Upstream-Status: Inappropriate [OE specific]
-
-Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
-
-Rebase to 4.3.6
-Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
----
- client/scripts/linux | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/client/scripts/linux b/client/scripts/linux
-index 3122a75..1712d7d 100755
---- a/client/scripts/linux
-+++ b/client/scripts/linux
-@@ -1,4 +1,4 @@
--#!/bin/bash
-+#!/bin/sh
- # dhclient-script for Linux. Dan Halbert, March, 1997.
- # Updated for Linux 2.[12] by Brian J. Murrell, January 1999.
- # No guarantees about this. I'm a novice at the details of Linux
--- 
-1.8.3.1
-

meta-arm-autonomy/recipes-connectivity/dhcp/dhcp/0012-dhcp-correct-the-intention-for-xml2-lib-search.patch

@@ -1,34 +0,0 @@
-From 501543b3ef715488a142e3d301ff2733aa33eec7 Mon Sep 17 00:00:00 2001
-From: Awais Belal <awais_belal@mentor.com>
-Date: Wed, 25 Oct 2017 21:00:05 +0500
-Subject: [PATCH] dhcp: correct the intention for xml2 lib search
-
-A missing case breaks the build when libxml2 is
-required and found appropriately. The third argument
-to the function AC_SEARCH_LIB is action-if-found which
-was mistakenly been used for the case where the library
-is not found and hence breaks the configure phase
-where it shoud actually pass.
-We now pass on silently when action-if-found is
-executed.
-
-Upstream-Status: Pending
-
-Signed-off-by: Awais Belal <awais_belal@mentor.com>
----
- configure.ac | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-Index: dhcp-4.4.1/configure.ac
-===================================================================
---- dhcp-4.4.1.orig/configure.ac
-+++ dhcp-4.4.1/configure.ac
-@@ -647,7 +647,7 @@ AC_ARG_WITH(libxml2,
- 	with_libxml2="$withval", with_libxml2="no")
- 
- if test x$with_libxml2 != xno; then
--	AC_SEARCH_LIBS(xmlTextWriterStartElement, [xml2],
-+	AC_SEARCH_LIBS(xmlTextWriterStartElement, [xml2],,
- 		[if test x$with_libxml2 != xauto; then
- 			AC_MSG_FAILURE([*** Cannot find xmlTextWriterStartElement with -lxml2 and libxml2 was requested])
- 		fi])

meta-arm-autonomy/recipes-connectivity/dhcp/dhcp/0013-fixup_use_libbind.patch

@@ -1,64 +0,0 @@
-lib and include path is hardcoded for use_libbind 
-
-use libdir and includedir vars
-
-Upstream-Status: Pending
-Signed-off-by: Armin Kuster <akuster808@gmail.com>
-
-Index: dhcp-4.4.1/configure.ac+lt
-===================================================================
---- dhcp-4.4.1.orig/configure.ac+lt
-+++ dhcp-4.4.1/configure.ac+lt
-@@ -801,22 +801,22 @@ no)
- 	if test ! -d "$use_libbind"; then
- 		AC_MSG_ERROR([Cannot find bind directory at $use_libbind])
- 	fi
--	if test ! -d "$use_libbind/include" -o \
--	        ! -f "$use_libbind/include/isc/buffer.h"
-+	if test ! -d "$use_libbind/$includedir" -o \
-+	        ! -f "$use_libbind/$includedir/isc/buffer.h"
- 	then
--		AC_MSG_ERROR([Cannot find bind includes at $use_libbind/include])
-+		AC_MSG_ERROR([Cannot find bind includes at $use_libbind/$includedir])
- 	fi
--	if test	! -d "$use_libbind/lib" -o \
--	        \( ! -f "$use_libbind/lib/libisc.a" -a \
--		   ! -f	"$use_libbind/lib/libisc.la" \)
-+	if test	! -d "$use_libbind/$libdir" -o \
-+	        \( ! -f "$use_libbind/$libdir/libisc.a" -a \
-+		   ! -f	"$use_libbind/$libdir/libisc.la" \)
- 	then
--		AC_MSG_ERROR([Cannot find bind libraries at $use_libbind/lib])
-+		AC_MSG_ERROR([Cannot find bind libraries at $use_libbind/$libdir])
- 	fi
- 	BINDDIR="$use_libbind"
--	BINDLIBIRSDIR="$BINDDIR/lib"
--	BINDLIBDNSDIR="$BINDDIR/lib"
--	BINDLIBISCCFGDIR="$BINDDIR/lib"
--	BINDLIBISCDIR="$BINDDIR/lib"	
-+	BINDLIBIRSDIR="$BINDDIR/$libdir"
-+	BINDLIBDNSDIR="$BINDDIR/$libdir"
-+	BINDLIBISCCFGDIR="$BINDDIR/$libdir"
-+	BINDLIBISCDIR="$BINDDIR/$libdir"
- 	DISTCHECK_LIBBIND_CONFIGURE_FLAG="--with-libbind=$use_libbind"
- 	;;
- esac
-@@ -856,14 +856,14 @@ AC_ARG_ENABLE(libtool,
- 
- if test "$use_libbind" != "no"; then
- 	if test "$want_libtool" = "yes" -a \
--	        ! -f "$use_libbind/lib/libisc.la"
-+	        ! -f "$use_libbind/$libdir/libisc.la"
- 	then
--		AC_MSG_ERROR([Cannot find dynamic libraries at $use_libbind/lib])
-+		AC_MSG_ERROR([Cannot find dynamic libraries at $use_libbind/$libdir])
- 	fi
- 	if test "$want_libtool" = "no" -a \
--	        ! -f "$use_libbind/lib/libisc.a"
-+	        ! -f "$use_libbind/$libdir/libisc.a"
- 	then
--		AC_MSG_ERROR([Cannot find static libraries at $use_libbind/lib])
-+		AC_MSG_ERROR([Cannot find static libraries at $use_libbind/$libdir])
- 	fi
- fi
- 

meta-arm-autonomy/recipes-connectivity/dhcp/dhcp_4.4.2.bb

@@ -1,23 +0,0 @@
-require dhcp.inc
-
-SRC_URI += "file://0001-define-macro-_PATH_DHCPD_CONF-and-_PATH_DHCLIENT_CON.patch \
-            file://0002-dhclient-dbus.patch \
-            file://0003-link-with-lcrypto.patch \
-            file://0004-Fix-out-of-tree-builds.patch \
-            file://0005-dhcp-client-fix-invoke-dhclient-script-failed-on-Rea.patch \
-            file://0007-Add-configure-argument-to-make-the-libxml2-dependenc.patch \
-            file://0009-remove-dhclient-script-bash-dependency.patch \
-            file://0012-dhcp-correct-the-intention-for-xml2-lib-search.patch \
-            file://0013-fixup_use_libbind.patch \
-            file://0001-workaround-busybox-limitation-in-linux-dhclient-script.patch \
-"
-
-SRC_URI[md5sum] = "2afdaf8498dc1edaf3012efdd589b3e1"
-SRC_URI[sha256sum] = "1a7ccd64a16e5e68f7b5e0f527fd07240a2892ea53fe245620f4f5f607004521"
-
-LDFLAGS_append = " -pthread"
-
-PACKAGECONFIG ?= ""
-PACKAGECONFIG[bind-httpstats] = "--with-libxml2,--without-libxml2,libxml2"
-
-CFLAGS += "-fcommon"

meta-arm-autonomy/recipes-connectivity/dhcp/files/default-relay

@@ -1,12 +0,0 @@
-# Defaults for dhcp-relay initscript
-# sourced by /etc/init.d/dhcp-relay
-
-# What servers should the DHCP relay forward requests to?
-# e.g: SERVERS="192.168.0.1"
-SERVERS=""
-
-# On what interfaces should the DHCP relay (dhrelay) serve DHCP requests?
-INTERFACES=""
-
-# Additional options that are passed to the DHCP relay daemon?
-OPTIONS=""

meta-arm-autonomy/recipes-connectivity/dhcp/files/default-server

@@ -1,7 +0,0 @@
-# Defaults for dhcp initscript
-# sourced by /etc/init.d/dhcp-server
-# installed at /etc/default/dhcp-server by the maintainer scripts
-
-# On what interfaces should the DHCP server (dhcpd) serve DHCP requests?
-#       Separate multiple interfaces with spaces, e.g. "eth0 eth1".
-INTERFACES=""

meta-arm-autonomy/recipes-connectivity/dhcp/files/dhclient-systemd-wrapper

@@ -1,39 +0,0 @@
-#!/bin/sh
-
-# In case the interface is used for nfs, skip it.
-nfsroot=0
-interfaces=""
-exec 9<&0 < /proc/mounts
-while read dev mtpt fstype rest; do
-    if test $mtpt = "/" ; then
-        case $fstype in
-            nfs | nfs4)
-                nfsroot=1
-                nfs_addr=`echo $rest | sed -e 's/^.*addr=\([0-9.]*\).*$/\1/'`
-                break
-                ;;
-            *)
-                ;;
-        esac
-    fi
-done
-exec 0<&9 9<&-
-
-if [ $nfsroot -eq 0 ]; then
-    interfaces="$INTERFACES"
-else
-    if [ -x /bin/ip -o -x /sbin/ip ] ; then
-	nfs_iface=`ip route get $nfs_addr | grep dev | sed -e 's/^.*dev \([-a-z0-9.]*\).*$/\1/'`
-    fi
-    for i in $INTERFACES; do
-	if test "x$i" = "x$nfs_iface"; then
-            echo "dhclient skipping nfsroot interface $i"
-	else
-	    interfaces="$interfaces $i"
-	fi
-    done
-fi
-
-if test "x$interfaces" != "x"; then
-    /sbin/dhclient -d -cf /etc/dhcp/dhclient.conf -q -lf /var/lib/dhcp/dhclient.leases $interfaces
-fi

meta-arm-autonomy/recipes-connectivity/dhcp/files/dhclient.conf

@@ -1,50 +0,0 @@
-# Configuration file for /sbin/dhclient, which is included in Debian's
-#	dhcp3-client package.
-#
-# This is a sample configuration file for dhclient. See dhclient.conf's
-#	man page for more information about the syntax of this file
-#	and a more comprehensive list of the parameters understood by
-#	dhclient.
-#
-# Normally, if the DHCP server provides reasonable information and does
-#	not leave anything out (like the domain name, for example), then
-#	few changes must be made to this file, if any.
-#
-
-#send host-name "andare.fugue.com";
-#send dhcp-client-identifier 1:0:a0:24:ab:fb:9c;
-#send dhcp-lease-time 3600;
-#supersede domain-name "fugue.com home.vix.com";
-#prepend domain-name-servers 127.0.0.1;
-request subnet-mask, broadcast-address, time-offset, routers,
-	domain-name, domain-name-servers, host-name,
-	netbios-name-servers, netbios-scope;
-#require subnet-mask, domain-name-servers;
-#timeout 60;
-#retry 60;
-#reboot 10;
-#select-timeout 5;
-#initial-interval 2;
-#script "/etc/dhcp3/dhclient-script";
-#media "-link0 -link1 -link2", "link0 link1";
-#reject 192.33.137.209;
-
-#alias {
-#  interface "eth0";
-#  fixed-address 192.5.5.213;
-#  option subnet-mask 255.255.255.255;
-#}
-
-#lease {
-#  interface "eth0";
-#  fixed-address 192.33.137.200;
-#  medium "link0 link1";
-#  option host-name "andare.swiftmedia.com";
-#  option subnet-mask 255.255.255.0;
-#  option broadcast-address 192.33.137.255;
-#  option routers 192.33.137.250;
-#  option domain-name-servers 127.0.0.1;
-#  renew 2 2000/1/12 00:00:01;
-#  rebind 2 2000/1/12 00:00:01;
-#  expire 2 2000/1/12 00:00:01;
-#}

meta-arm-autonomy/recipes-connectivity/dhcp/files/dhclient.service

@@ -1,13 +0,0 @@
-[Unit]
-Description=Dynamic Host Configuration Protocol (DHCP)
-Wants=network.target
-Before=network.target
-After=systemd-udevd.service
-
-[Service]
-EnvironmentFile=-@SYSCONFDIR@/default/dhcp-client
-ExecStart=@BASE_SBINDIR@/dhclient-systemd-wrapper
-RemainAfterExit=yes
-
-[Install]
-WantedBy=multi-user.target

meta-arm-autonomy/recipes-connectivity/dhcp/files/dhcpd.conf

@@ -1,108 +0,0 @@
-#
-# Sample configuration file for ISC dhcpd for Debian
-#
-# $Id: dhcpd.conf,v 1.1.1.1 2002/05/21 00:07:44 peloy Exp $
-#
-
-# The ddns-updates-style parameter controls whether or not the server will
-# attempt to do a DNS update when a lease is confirmed. We default to the
-# behavior of the version 2 packages ('none', since DHCP v2 didn't
-# have support for DDNS.)
-ddns-update-style none;
-
-# option definitions common to all supported networks...
-option domain-name "example.org";
-option domain-name-servers ns1.example.org, ns2.example.org;
-
-default-lease-time 600;
-max-lease-time 7200;
-
-# If this DHCP server is the official DHCP server for the local
-# network, the authoritative directive should be uncommented.
-#authoritative;
-
-# Use this to send dhcp log messages to a different log file (you also
-# have to hack syslog.conf to complete the redirection).
-log-facility local7;
-
-# No service will be given on this subnet, but declaring it helps the 
-# DHCP server to understand the network topology.
-
-#subnet 10.152.187.0 netmask 255.255.255.0 {
-#}
-
-# This is a very basic subnet declaration.
-
-#subnet 10.254.239.0 netmask 255.255.255.224 {
-#  range 10.254.239.10 10.254.239.20;
-#  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
-#}
-
-# This declaration allows BOOTP clients to get dynamic addresses,
-# which we don't really recommend.
-
-#subnet 10.254.239.32 netmask 255.255.255.224 {
-#  range dynamic-bootp 10.254.239.40 10.254.239.60;
-#  option broadcast-address 10.254.239.31;
-#  option routers rtr-239-32-1.example.org;
-#}
-
-# A slightly different configuration for an internal subnet.
-#subnet 10.5.5.0 netmask 255.255.255.224 {
-#  range 10.5.5.26 10.5.5.30;
-#  option domain-name-servers ns1.internal.example.org;
-#  option domain-name "internal.example.org";
-#  option routers 10.5.5.1;
-#  option broadcast-address 10.5.5.31;
-#  default-lease-time 600;
-#  max-lease-time 7200;
-#}
-
-# Hosts which require special configuration options can be listed in
-# host statements.   If no address is specified, the address will be
-# allocated dynamically (if possible), but the host-specific information
-# will still come from the host declaration.
-
-#host passacaglia {
-#  hardware ethernet 0:0:c0:5d:bd:95;
-#  filename "vmunix.passacaglia";
-#  server-name "toccata.fugue.com";
-#}
-
-# Fixed IP addresses can also be specified for hosts.   These addresses
-# should not also be listed as being available for dynamic assignment.
-# Hosts for which fixed IP addresses have been specified can boot using
-# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
-# be booted with DHCP, unless there is an address range on the subnet
-# to which a BOOTP client is connected which has the dynamic-bootp flag
-# set.
-#host fantasia {
-#  hardware ethernet 08:00:07:26:c0:a5;
-#  fixed-address fantasia.fugue.com;
-#}
-
-# You can declare a class of clients and then do address allocation
-# based on that.   The example below shows a case where all clients
-# in a certain class get addresses on the 10.17.224/24 subnet, and all
-# other clients get addresses on the 10.0.29/24 subnet.
-
-#class "foo" {
-#  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
-#}
-
-#shared-network 224-29 {
-#  subnet 10.17.224.0 netmask 255.255.255.0 {
-#    option routers rtr-224.example.org;
-#  }
-#  subnet 10.0.29.0 netmask 255.255.255.0 {
-#    option routers rtr-29.example.org;
-#  }
-#  pool {
-#    allow members of "foo";
-#    range 10.17.224.10 10.17.224.250;
-#  }
-#  pool {
-#    deny members of "foo";
-#    range 10.0.29.10 10.0.29.230;
-#  }
-#}

meta-arm-autonomy/recipes-connectivity/dhcp/files/dhcpd.service

@@ -1,15 +0,0 @@
-[Unit]
-Description=DHCPv4 Server Daemon
-Documentation=man:dhcpd(8) man:dhcpd.conf(5)
-After=network.target
-After=time-sync.target
-
-[Service]
-PIDFile=@localstatedir@/run/dhcpd.pid
-EnvironmentFile=@SYSCONFDIR@/default/dhcp-server
-EnvironmentFile=-@SYSCONFDIR@/sysconfig/dhcp-server
-ExecStartPre=@base_bindir@/touch @localstatedir@/lib/dhcp/dhcpd.leases
-ExecStart=@SBINDIR@/dhcpd -f -cf @SYSCONFDIR@/dhcp/dhcpd.conf -pf @localstatedir@/run/dhcpd.pid $DHCPDARGS -q $INTERFACES
-
-[Install]
-WantedBy=multi-user.target

meta-arm-autonomy/recipes-connectivity/dhcp/files/dhcpd6.service

@@ -1,15 +0,0 @@
-[Unit]
-Description=DHCPv6 Server Daemon
-Documentation=man:dhcpd(8) man:dhcpd.conf(5)
-After=network.target
-After=time-sync.target
-
-[Service]
-PIDFile=@localstatedir@/run/dhcpd6.pid
-EnvironmentFile=@SYSCONFDIR@/default/dhcp-server
-EnvironmentFile=-@SYSCONFDIR@/sysconfig/dhcpd6
-ExecStartPre=@base_bindir@/touch @localstatedir@/lib/dhcp/dhcpd6.leases
-ExecStart=@SBINDIR@/dhcpd -f -6 -cf @SYSCONFDIR@/dhcp/dhcpd6.conf -pf @localstatedir@/run/dhcpd6.pid $DHCPDARGS -q $INTERFACES
-
-[Install]
-WantedBy=multi-user.target

meta-arm-autonomy/recipes-connectivity/dhcp/files/dhcrelay.service

@@ -1,10 +0,0 @@
-[Unit]
-Description=DHCP Relay Agent Daemon
-After=network.target
-
-[Service]
-EnvironmentFile=@SYSCONFDIR@/default/dhcp-relay
-ExecStart=@SBINDIR@/dhcrelay -d --no-pid -q $SERVERS
-
-[Install]
-WantedBy=multi-user.target

meta-arm-autonomy/recipes-connectivity/dhcp/files/init-relay

@@ -1,44 +0,0 @@
-#!/bin/sh
-#
-# $Id: dhcp3-relay,v 1.1 2004/04/16 15:41:08 ml Exp $
-#
-
-# It is not safe to start if we don't have a default configuration...
-if [ ! -f /etc/default/dhcp-relay ]; then
-	echo "/etc/default/dhcp-relay does not exist! - Aborting..."
-	echo "create this file to fix the problem."
-	exit 1
-fi
-
-# Read init script configuration (interfaces the daemon should listen on
-# and the DHCP server we should forward requests to.)
-. /etc/default/dhcp-relay
-
-# Build command line for interfaces (will be passed to dhrelay below.)
-IFCMD=""
-if test "$INTERFACES" != ""; then
-	for I in $INTERFACES; do
-		IFCMD=${IFCMD}"-i "${I}" "
-	done
-fi
-
-DHCRELAYPID=/var/run/dhcrelay.pid
-
-case "$1" in
-	start)
-		start-stop-daemon -S -x /usr/sbin/dhcrelay -- -q $OPTIONS $IFCMD $SERVERS
-		;;
-	stop)
-		start-stop-daemon -K -x /usr/sbin/dhcrelay
-		;;
-	restart | force-reload)
-		$0 stop
-		sleep 2
-		$0 start
-		;;
-	*)
-		echo "Usage: /etc/init.d/dhcp-relay {start|stop|restart|force-reload}"
-		exit 1 
-esac
-
-exit 0

meta-arm-autonomy/recipes-connectivity/dhcp/files/init-server

@@ -1,44 +0,0 @@
-#!/bin/sh
-#
-# $Id: dhcp3-server.init.d,v 1.4 2003/07/13 19:12:41 mdz Exp $
-#
-
-test -f /usr/sbin/dhcpd || exit 0
-
-# It is not safe to start if we don't have a default configuration...
-if [ ! -f /etc/default/dhcp-server ]; then
-	echo "/etc/default/dhcp-server does not exist! - Aborting..."
-	exit 0
-fi
-
-# Read init script configuration (so far only interfaces the daemon
-# should listen on.)
-. /etc/default/dhcp-server
-
-case "$1" in
-	start)
-		echo -n "Starting DHCP server: "
-		test -d /var/lib/dhcp/ || mkdir -p /var/lib/dhcp/
-		test -f /var/lib/dhcp/dhcpd.leases || touch /var/lib/dhcp/dhcpd.leases	
-		start-stop-daemon -S -x /usr/sbin/dhcpd -- -q $INTERFACES -user dhcp -group dhcp
-		echo "."
-		;;
-	stop)
-		echo -n "Stopping DHCP server: dhcpd3"
-		start-stop-daemon -K -x /usr/sbin/dhcpd
-		echo "."
-		;;
-	restart | force-reload)
-		$0 stop
-		sleep 2
-		$0 start
-		if [ "$?" != "0" ]; then
-			exit 1
-		fi
-		;;
-	*)
-		echo "Usage: /etc/init.d/dhcp-server {start|stop|restart|force-reload}"
-		exit 1 
-esac
-
-exit 0

meta-arm-autonomy/recipes-core/images/arm-autonomy-host-image-minimal.bb

@@ -50,6 +50,24 @@ EXTRA_IMAGEDEPENDS += "xen"
 # Build xen-devicetree to produce a xen ready devicetree
 EXTRA_IMAGEDEPENDS += "xen-devicetree"
 
+# Documentation for setting up a multiconfig build can be found in:
+# meta-arm-autonomy/documentation/arm-autonomy-multiconfig.md
+
+# In a multiconfig build this variable will hold a dependency string, which differs based
+# on whether the guest has initramfs or not.
+# It may have a space seperated list of dependency strings if mulitple guest types are
+# configured
+MC_DOIMAGE_MCDEPENDS ?= ""
+# Example value: mc:host:guest:core-image-minimal:do_image_complete
+
+# In a multiconfig build the host task 'do_image' has a dependency on multiconfig guest.
+# This ensures that the guest image file already exists when it is needed by the host
+DO_IMAGE_MCDEPENDS := "${@ '${MC_DOIMAGE_MCDEPENDS}' if d.getVar('BBMULTICONFIG') else ''}"
+
+# Apply mc dependency. Empty string if multiconfig not enabled
+do_image[mcdepends] += "${DO_IMAGE_MCDEPENDS}"
+
+
 python __anonymous() {
     if bb.utils.contains('DISTRO_FEATURES', 'arm-autonomy-host', False, True, d):
         raise bb.parse.SkipRecipe("DISTRO_FEATURES does not contain 'arm-autonomy-host'")
@@ -106,7 +124,14 @@ python add_extern_guests () {
         _, _, path, _, _, parm = bb.fetch.decodeurl(entry)
         if 'guestname' in parm:
             if os.path.islink(path):
-                bb.fatal("Guest file is a symlink: " + path)
+                realpath = os.path.realpath(path)
+
+                if not os.path.exists(realpath):
+                    bb.fatal("ARM_AUTONOMY_HOST_IMAGE_EXTERN_GUESTS link does not resolve: " + path)
+
+                bb.note("Guest file is a symlink:\n " + path + "\nResolved to:\n " + realpath)
+                path = realpath
+
             bb.utils.mkdirhier(guestdir)
             dstname = parm['guestname']
             # Add file extension if not there

meta-arm-autonomy/recipes-extended/xen-devicetree/xen-devicetree.bb

@@ -14,7 +14,9 @@ DESCRIPTION = "Add entries in DTB for Xen and Dom0"
 
 # Please refer to documentation/xen-devicetree.md for documentation on those
 # parameters
-XEN_DEVICETREE_DEPEND ?= "virtual/kernel:do_deploy"
+# kernel size is passed to xen via xen.dtb so wee need to add
+# 'virtual/kernel:do_deploy' as a dependency
+XEN_DEVICETREE_DEPEND_append = " virtual/kernel:do_deploy"
 XEN_DEVICETREE_DTBS ?= "${KERNEL_DEVICETREE}"
 XEN_DEVICETREE_XEN_BOOTARGS ?= "noreboot dom0_mem=${XEN_DEVICETREE_DOM0_MEM}"
 XEN_DEVICETREE_DOM0_MEM ?= "1024M"
@@ -67,6 +69,33 @@ do_deploy() {
     done
 }
 do_deploy[depends] += "${XEN_DEVICETREE_DEPEND}"
+do_deploy[prefuncs] += "calc_xen_dtb_dom0_size"
 
 addtask deploy after do_install
 
+python calc_xen_dtb_dom0_size() {
+    from math import ceil
+    size = 0
+    if d.getVar('KERNEL_IMAGE_MAXSIZE'):
+        bb.note('size calculation based on KERNEL_IMAGE_MAXSIZE')
+        size = int(d.getVar('KERNEL_IMAGE_MAXSIZE')) * 1024
+    else:
+        kernel = os.path.realpath(d.getVar('DEPLOY_DIR_IMAGE') + '/' +\
+                 d.getVar('KERNEL_IMAGETYPE'))
+        size = os.stat(kernel).st_size
+        bb.note('size calculation based on kernel Image file: %s' % kernel)
+
+    bb.note('size in bytes: %d' % size)
+    # Ceil to MiB
+    size_required = ceil(size / (2 ** 20)) * (2 ** 20)
+    size_defined = int(d.getVar('XEN_DEVICETREE_DOM0_SIZE'), 16)
+
+    if size_required > size_defined:
+        bb.warn ("Wrong kernel size setting inside xen dtb!\n"\
+                 "Required:\t%(req)d (%(req)#010X)\n"\
+                 "Requested:\t%(def)d (%(def)#010X)"\
+                 % {"req": size_required, "def": size_defined})
+        bb.warn ("Overriding XEN_DEVICETREE_DOM0_SIZE with "\
+                 "%(req)d (%(req)#010X)" % {"req": size_required})
+        d.setVar('XEN_DEVICETREE_DOM0_SIZE', hex(size_required))
+}

meta-arm-autonomy/recipes-extended/xen/xen-4.14/0001-arm-Add-Neoverse-N1-processor-identification.patch

@@ -1,40 +0,0 @@
-From 3b418b33265402aab0cb1bf2b745a25724bae2d8 Mon Sep 17 00:00:00 2001
-Message-Id: <3b418b33265402aab0cb1bf2b745a25724bae2d8.1602684880.git.diego.sueiro@arm.com>
-From: Bertrand Marquis <bertrand.marquis@arm.com>
-Date: Tue, 18 Aug 2020 14:47:38 +0100
-Subject: [PATCH] arm: Add Neoverse N1 processor identification
-
-Add MIDR and CPU part numbers for Neoverse N1
-
-Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
-Acked-by: Julien Grall <jgrall@amazon.com>
-
-Upstream-Status: Backport
-Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
----
- xen/include/asm-arm/processor.h | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/xen/include/asm-arm/processor.h b/xen/include/asm-arm/processor.h
-index aa642e3..3ca67f8 100644
---- a/xen/include/asm-arm/processor.h
-+++ b/xen/include/asm-arm/processor.h
-@@ -58,6 +58,7 @@
- #define ARM_CPU_PART_CORTEX_A73     0xD09
- #define ARM_CPU_PART_CORTEX_A75     0xD0A
- #define ARM_CPU_PART_CORTEX_A76     0xD0B
-+#define ARM_CPU_PART_NEOVERSE_N1    0xD0C
- 
- #define MIDR_CORTEX_A12 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A12)
- #define MIDR_CORTEX_A17 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A17)
-@@ -68,6 +69,7 @@
- #define MIDR_CORTEX_A73 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A73)
- #define MIDR_CORTEX_A75 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A75)
- #define MIDR_CORTEX_A76 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A76)
-+#define MIDR_NEOVERSE_N1 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N1)
- 
- /* MPIDR Multiprocessor Affinity Register */
- #define _MPIDR_UP           (30)
--- 
-2.7.4
-

meta-arm-autonomy/recipes-extended/xen/xen-4.14/0002-xen-arm-Enable-CPU-Erratum-1165522-for-Neoverse.patch

@@ -1,42 +0,0 @@
-From 858c0be8c2fa4125a0fa0acaa03ae730e5c7cb3c Mon Sep 17 00:00:00 2001
-Message-Id: <858c0be8c2fa4125a0fa0acaa03ae730e5c7cb3c.1602684183.git.diego.sueiro@arm.com>
-From: Bertrand Marquis <bertrand.marquis@arm.com>
-Date: Tue, 18 Aug 2020 14:47:39 +0100
-Subject: [PATCH] xen/arm: Enable CPU Erratum 1165522 for Neoverse
-
-Enable CPU erratum of Speculative AT on the Neoverse N1 processor
-versions r0p0 to r2p0.
-Also Fix Cortex A76 Erratum string which had a wrong errata number.
-
-Signed-off-by: Bertrand Marquis <bertrand.marquis@arm.com>
-Acked-by: Julien Grall <jgrall@amazon.com>
-
-Upstream-Status: Backport
-Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
----
- xen/arch/arm/cpuerrata.c | 8 +++++++-
- 1 file changed, 7 insertions(+), 1 deletion(-)
-
-diff --git a/xen/arch/arm/cpuerrata.c b/xen/arch/arm/cpuerrata.c
-index 0248893..6c09017 100644
---- a/xen/arch/arm/cpuerrata.c
-+++ b/xen/arch/arm/cpuerrata.c
-@@ -477,8 +477,14 @@ static const struct arm_cpu_capabilities arm_errata[] = {
-     },
- #endif
-     {
-+        /* Neoverse r0p0 - r2p0 */
-+        .desc = "ARM erratum 1165522",
-+        .capability = ARM64_WORKAROUND_AT_SPECULATE,
-+        MIDR_RANGE(MIDR_NEOVERSE_N1, 0, 2 << MIDR_VARIANT_SHIFT),
-+    },
-+    {
-         /* Cortex-A76 r0p0 - r2p0 */
--        .desc = "ARM erratum 116522",
-+        .desc = "ARM erratum 1165522",
-         .capability = ARM64_WORKAROUND_AT_SPECULATE,
-         MIDR_RANGE(MIDR_CORTEX_A76, 0, 2 << MIDR_VARIANT_SHIFT),
-     },
--- 
-2.7.4
-

meta-arm-autonomy/recipes-extended/xen/xen-4.14/0003-xen-arm-Update-silicon-errata.txt-with-the-Neovers-A.patch

@@ -1,35 +0,0 @@
-From 1814a626fb5811184eda64fe22f0055df4600211 Mon Sep 17 00:00:00 2001
-Message-Id: <1814a626fb5811184eda64fe22f0055df4600211.1602684203.git.diego.sueiro@arm.com>
-From: Julien Grall <jgrall@amazon.com>
-Date: Tue, 25 Aug 2020 18:38:10 +0100
-Subject: [PATCH] xen/arm: Update silicon-errata.txt with the Neovers AT
- erratum
-
-Commit 858c0be8c2fa "xen/arm: Enable CPU Erratum 1165522 for Neoverse"
-added a new erratum but forgot to update silicon-errata.txt.
-
-Update the file accordingly to keep track of errata workaround in Xen.
-
-Signed-off-by: Julien Grall <jgrall@amazon.com>
-Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
-Acked-by: Stefano Stabellini <sstabellini@kernel.org>
-
-Upstream-Status: Backport
-Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
----
- docs/misc/arm/silicon-errata.txt | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/docs/misc/arm/silicon-errata.txt b/docs/misc/arm/silicon-errata.txt
-index 11e5a9d..e15d092 100644
---- a/docs/misc/arm/silicon-errata.txt
-+++ b/docs/misc/arm/silicon-errata.txt
-@@ -51,4 +51,5 @@ stable hypervisors.
- | ARM            | Cortex-A57      | #1319537        | N/A                     |
- | ARM            | Cortex-A72      | #1319367        | N/A                     |
- | ARM            | Cortex-A76      | #1165522        | N/A                     |
-+| ARM            | Neoverse-N1     | #1165522        | N/A
- | ARM            | MMU-500         | #842869         | N/A                     |
--- 
-2.7.4
-

meta-arm-autonomy/recipes-extended/xen/xen-4.14/0004-xen-arm-Missing-N1-A76-A75-FP-registers-in-vCPU-cont.patch

@@ -1,51 +0,0 @@
-From 968bb86d04913f52d7678a842474f2a674a8b23e Mon Sep 17 00:00:00 2001
-Message-Id: <968bb86d04913f52d7678a842474f2a674a8b23e.1602683678.git.diego.sueiro@arm.com>
-From: Wei Chen <wei.chen@arm.com>
-Date: Fri, 28 Aug 2020 02:34:03 +0000
-Subject: [PATCH] xen/arm: Missing N1/A76/A75 FP registers in vCPU context
- switch
-
-Xen has cpu_has_fp/cpu_has_simd to detect whether the CPU supports
-FP/SIMD or not. But currently, these two MACROs only consider value 0
-of ID_AA64PFR0_EL1.FP/SIMD as FP/SIMD features enabled. But for CPUs
-that support FP/SIMD and half-precision floating-point arithmetic, the
-ID_AA64PFR0_EL1.FP/SIMD are 1 (see Arm ARM DDI0487F.b, D13.2.64).
-For these CPUs, xen will treat them as no FP/SIMD support, the
-vfp_save/restore_state will not take effect.
-
-From the TRM documents of Cortex-A75/A76/N1, we know these CPUs support
-basic Advanced SIMD/FP and half-precision floating-point arithmetic. In
-this case, on N1/A76/A75 platforms, Xen will always miss the floating
-pointer registers save/restore. If different vCPUs are running on the
-same pCPU, the floating pointer registers will be corrupted randomly.
-
-This patch fixes Xen on these new cores.
-
-Signed-off-by: Wei Chen <wei.chen@arm.com>
-Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
-Reviewed-by: Julien Grall <jgrall@amazon.com>
-
-Upstream-Status: Backport
-Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
----
- xen/include/asm-arm/cpufeature.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/xen/include/asm-arm/cpufeature.h b/xen/include/asm-arm/cpufeature.h
-index 674beb0..10878ea 100644
---- a/xen/include/asm-arm/cpufeature.h
-+++ b/xen/include/asm-arm/cpufeature.h
-@@ -13,8 +13,8 @@
- #define cpu_has_el2_64    (boot_cpu_feature64(el2) >= 1)
- #define cpu_has_el3_32    (boot_cpu_feature64(el3) == 2)
- #define cpu_has_el3_64    (boot_cpu_feature64(el3) >= 1)
--#define cpu_has_fp        (boot_cpu_feature64(fp) == 0)
--#define cpu_has_simd      (boot_cpu_feature64(simd) == 0)
-+#define cpu_has_fp        (boot_cpu_feature64(fp) < 8)
-+#define cpu_has_simd      (boot_cpu_feature64(simd) < 8)
- #define cpu_has_gicv3     (boot_cpu_feature64(gic) == 1)
- #endif
- 
--- 
-2.7.4
-

meta-arm-autonomy/recipes-extended/xen/xen-tools/0001-vif-nat-fix-hostname.patch

@@ -1,18 +1,34 @@
-Upstream-Status: Pending
+Upstream-Status: Backport
 Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
+Signed-off-by: Kamil Dziezyk <kamil.dziezyk@arm.com>
+
+From 5499e0fc8082024bf7e2d0facd5c976e82105070 Mon Sep 17 00:00:00 2001
+From: Diego Sueiro <diego.sueiro@arm.com>
+Date: Thu, 20 Aug 2020 11:58:20 +0100
+Subject: [PATCH] tools/hotplug: Fix hostname setting in vif-nat
 
 Setting the hostname is failing because the "$XENBUS_PATH/domain"
 doesn't exist anymore. To fix this we set it to dom$domid
 
-Index: git/tools/hotplug/Linux/vif-nat
-===================================================================
---- git.orig/tools/hotplug/Linux/vif-nat
-+++ git/tools/hotplug/Linux/vif-nat
-@@ -86,6 +86,7 @@ router_ip=$(routing_ip "$ip")
+Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
+Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
+Acked-by: Wei Liu <wl@xen.org>
+---
+ tools/hotplug/Linux/vif-nat | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/tools/hotplug/Linux/vif-nat b/tools/hotplug/Linux/vif-nat
+index a76d9c784b..26144350b3 100644
+--- a/tools/hotplug/Linux/vif-nat
++++ b/tools/hotplug/Linux/vif-nat
+@@ -85,7 +85,7 @@ router_ip=$(routing_ip "$ip")
+ # Split the given IP/bits pair.
  vif_ip=`echo ${ip} | awk -F/ '{print $1}'`
  
- hostname=$(xenstore_read "$XENBUS_PATH/domain" | tr -- '_.:/+' '-----')
-+[ -z "${hostname}" ] && hostname=dom$domid
+-hostname=$(xenstore_read "$XENBUS_PATH/domain" | tr -- '_.:/+' '-----')
++hostname=dom$domid
  if [ "$vifid" != "1" ]
  then
    hostname="$hostname-$vifid"
+-- 
+2.17.1

meta-arm-autonomy/recipes-extended/xen/xen-tools/0002-vif-nat-fix-symlink-removal.patch

@@ -1,45 +0,0 @@
-Upstream-Status: Pending
-Signed-off-by: Diego Sueiro <diego.sueiro@arm.com>
-
-Copy temp files used to add/remove dhcpd configurations to avoid
-replacing potential symlinks.
-
-Index: git/tools/hotplug/Linux/vif-nat
-===================================================================
---- git.orig/tools/hotplug/Linux/vif-nat
-+++ git/tools/hotplug/Linux/vif-nat
-@@ -99,7 +100,8 @@ dhcparg_remove_entry()
-   then
-     rm "$tmpfile"
-   else
--    mv "$tmpfile" "$dhcpd_arg_file"
-+    cp "$tmpfile" "$dhcpd_arg_file"
-+    rm "$tmpfile"
-   fi
- }
- 
-@@ -109,11 +111,11 @@ dhcparg_add_entry()
-   local tmpfile=$(mktemp)
-   # handle Red Hat, SUSE, and Debian styles, with or without quotes
-   sed -e 's/^DHCPDARGS="*\([^"]*\)"*/DHCPDARGS="\1'"${dev} "'"/' \
--     "$dhcpd_arg_file" >"$tmpfile" && mv "$tmpfile" "$dhcpd_arg_file"
-+     "$dhcpd_arg_file" >"$tmpfile" && cp "$tmpfile" "$dhcpd_arg_file"
-   sed -e 's/^DHCPD_INTERFACE="*\([^"]*\)"*/DHCPD_INTERFACE="\1'"${dev} "'"/' \
--     "$dhcpd_arg_file" >"$tmpfile" && mv "$tmpfile" "$dhcpd_arg_file"
-+     "$dhcpd_arg_file" >"$tmpfile" && cp "$tmpfile" "$dhcpd_arg_file"
-   sed -e 's/^INTERFACES="*\([^"]*\)"*/INTERFACES="\1'"${dev} "'"/' \
--     "$dhcpd_arg_file" >"$tmpfile" && mv "$tmpfile" "$dhcpd_arg_file"
-+     "$dhcpd_arg_file" >"$tmpfile" && cp "$tmpfile" "$dhcpd_arg_file"
-   rm -f "$tmpfile"
- }
- 
-@@ -125,7 +127,8 @@ dhcp_remove_entry()
-   then
-     rm "$tmpfile"
-   else
--    mv "$tmpfile" "$dhcpd_conf_file"
-+    cp "$tmpfile" "$dhcpd_conf_file"
-+    rm "$tmpfile"
-   fi
-   dhcparg_remove_entry
- }

meta-arm-autonomy/recipes-extended/xen/xen-tools_%.bbappend

@@ -1,7 +1,6 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
 
 SRC_URI += "file://0001-vif-nat-fix-hostname.patch \
-            file://0002-vif-nat-fix-symlink-removal.patch \
            "
 
 PACKAGECONFIG_remove = "\

meta-arm-autonomy/recipes-extended/xen/xen_4.14.bbappend

@@ -1,9 +1,5 @@
 FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}-4.14:"
 
 SRC_URI += " \
-    file://0001-arm-Add-Neoverse-N1-processor-identification.patch \
-    file://0002-xen-arm-Enable-CPU-Erratum-1165522-for-Neoverse.patch \
-    file://0003-xen-arm-Update-silicon-errata.txt-with-the-Neovers-A.patch \
-    file://0004-xen-arm-Missing-N1-A76-A75-FP-registers-in-vCPU-cont.patch \
-    file://0005-xen-arm-Throw-messages-for-unknown-FP-SIMD-implement.patch \
+    file://0001-xen-arm-Throw-messages-for-unknown-FP-SIMD-implement.patch \
     "

meta-arm-autonomy/recipes-extended/xenguest/files/00-vif-xenguest.hook

@@ -18,6 +18,8 @@
 domid=$(xenstore_read "${XENBUS_PATH}/frontend-id")
 guestname=$(xenstore_read "/local/domain/${domid}/name")
 bridge=$(xenstore_read "${XENBUS_PATH}/bridge")
+mac=$(xenstore_read "$XENBUS_PATH/mac")
+kea_conf_file="/etc/kea/kea-dhcp4.conf"
 
 if [ ! -f /etc/xenguest/guests/${guestname}/params.cfg ]; then
     log debug "No /etc/xenguest/guests/${guestname}/params.cfg. Exiting."
@@ -36,63 +38,48 @@ get_subnet_prefix() {
 
 subnetprefix=$(get_subnet_prefix)
 
-dhcpd_remove_conf_entry()
+kea_remove_conf_entry()
 {
-    local tmpfile=$(mktemp)
+    log debug "kea_remove_conf_entry"
+    claim_lock "vif-nat-kea"
 
-    # Remove the the xenguest dhcpd config file inclusion in the dhcpd
-    # main config
-    grep -v "include \"${XENGUEST_DHCPD_CONF_FILE}\";" \
-            "${dhcpd_conf_file}" >"${tmpfile}"
-    if ! diff "${tmpfile}" "${dhcpd_conf_file}" >/dev/null
-    then
-        cp "${tmpfile}" "${dhcpd_conf_file}"
-    fi
-    rm ${tmpfile}
+    # Remove the the xenguest kea config file inclusion in the kea main config
+    sed -i "/${kea_guest_config//'/'/'\/'}/d" "${kea_conf_file}"
 
-    # Remove the generated the xenguest dhcpd file
-    rm ${XENGUEST_DHCPD_CONF_FILE}
+    # Remove interface entry 1st case: [ "dev1", "dev_to_remove" ]
+    sed -i "s/,\ \"$dev\"//" "${kea_conf_file}"
+    # Remove interface entry 2nd case: [ "dev_to_remove", "dev1" ]
+    sed -i "s/\"$dev\",\ //" "${kea_conf_file}"
+    # Remove interface entry 3rd case: [ "dev_to_remove" ]
+    sed -i "s/\[\ \"$dev\"\ \]/\[\ \]/" "${kea_conf_file}"
+
+    # Remove the generated the xenguest kea subnet conf file
+    rm ${XENGUEST_KEA_SUBNET_CONFIG}
+
+    keactrl reload
+
+    release_lock "vif-nat-kea"
 }
 
-# This function removes the dhcpd options added by the vif-nat script and
-# adds the user provided options under the ${XENGUEST_DHCPD_HOST_OPTIONS}
-# variable set in "/etc/xenguest/guests/${guestname}/files/dhcpd-params.cfg"
-# file.
-dhcpd_add_conf_entries()
+kea_add_conf_entries()
 {
-    # We need to remove the previous added entry from vif-nat script
-    dhcp_remove_entry
+    log debug "kea_add_conf_entries"
+    claim_lock "vif-nat-kea"
 
-    # Include the xenguest dhcpd config file in the dhcpd main config
-    echo >>"${dhcpd_conf_file}" "include \"${XENGUEST_DHCPD_CONF_FILE}\";"
+    # Include vif in the interfaces 1st case - no other entries:
+    search_for='\"interfaces\": \[ '
+    sed -i "/${search_for}\"*\"\ */ s/\ \]/,\ \"${dev}\"\ \]/g" "${kea_conf_file}"
+    sed -i "s/${search_for}]/${search_for}\"${dev}\"\ \]/g" "${kea_conf_file}"
 
-    # Generate the xenguest dhcpd file
-    echo -e "$(eval "echo -e \"$(cat ${XENGUEST_DHCPD_PARAMS_FILE})\"")" \
-            >> "${XENGUEST_DHCPD_CONF_FILE}"
+    # Include the xenguest kea subnet conf file in the kea main config
+    search_for='\"subnet4\": \['
+    sed -i "/$search_for/a $kea_guest_config" "${kea_conf_file}"
 
-    # Re-add the dhcpargs entries removed by dhcp_remove_entry call
-    dhcparg_add_entry
-}
+    # Generate the xenguest kea subnet conf file
+    echo -e "$(eval "echo -e \"$(cat ${XENGUEST_KEA_SUBNET_TEMPLATE})\"")" \
+            > "${XENGUEST_KEA_SUBNET_CONFIG}"
 
-dhcpd_online(){
-    log debug "dhcpd_online"
-    claim_lock "vif-nat-dhcp"
-    dhcpd_add_conf_entries
-    release_lock "vif-nat-dhcp"
-   "$dhcpd_init_file" restart || true
-}
-
-dhcpd_offline(){
-    log debug "dhcpd_offline"
-    claim_lock "vif-nat-dhcp"
-    dhcpd_remove_conf_entry
-    release_lock "vif-nat-dhcp"
-    "$dhcpd_init_file" restart || true # We need to ignore failure because
-                                       # ISC dhcpd 3 borks if there is nothing
-                                       # for it to do, which is the case if
-                                       # the outgoing interface is not
-                                       # configured to offer leases and there
-                                       # are no vifs.
+    release_lock "vif-nat-kea"
 }
 
 call_extra_hooks() {
@@ -111,24 +98,29 @@ call_extra_hooks() {
 
 case "${XENGUEST_NETWORK_TYPE}" in
     nat)
-        XENGUEST_DHCPD_PARAMS_FILE=${XENGUEST_DHCPD_PARAMS_FILE:-"/etc/xenguest/guests/${guestname}/files/dhcpd-params.cfg"}
-        if [ ! -f ${XENGUEST_DHCPD_PARAMS_FILE} ]; then
-            log debug "No ${XENGUEST_DHCPD_PARAMS_FILE} file. Aborting"
+        XENGUEST_KEA_SUBNET_TEMPLATE=${XENGUEST_KEA_SUBNET_TEMPLATE:-"/etc/xenguest/guests/${guestname}/files/kea-subnet4.json"}
+        if [ ! -f ${XENGUEST_KEA_SUBNET_TEMPLATE} ]; then
+            log debug "No ${XENGUEST_KEA_SUBNET_TEMPLATE} file. Aborting"
             return
         fi
 
-        XENGUEST_DHCPD_CONF_FILE="/etc/dhcp/dhcpd.dom$domid.conf"
+        XENGUEST_KEA_SUBNET_CONFIG="/etc/kea/kea-subnet4.dom$domid.json"
+        if [ ! -d "$(dirname ${XENGUEST_KEA_SUBNET_CONFIG})" ]; then
+            log debug "No kea configuration directory. Aborting"
+            return
+        fi
+        kea_guest_config="\ \ \ \ <?include \"${XENGUEST_KEA_SUBNET_CONFIG}\"?>"
 
         case "$command" in
             online)
-                dhcpd_online
+                kea_add_conf_entries
 
                 # Enable ip forwarding and NAT for the ${bridge} interface
                 sysctl -w net.ipv4.ip_forward=1
                 iptables_w -t nat -A POSTROUTING -o ${bridge} -j MASQUERADE -m comment --comment "dom${domid}"
                 ;;
             offline)
-                dhcpd_offline
+                kea_remove_conf_entry
 
                 # Remove the NAT iptables rules created for the dom${domid}
                 guest_ipt_rule=$(iptables_w -t nat -vL POSTROUTING -n --line-number | grep -w dom${domid} | awk '{print $1}' | tac)

meta-arm-autonomy/recipes-extended/xenguest/files/dhcpd-params.cfg

@@ -1,30 +0,0 @@
-# This file holds the guest dhcpd options running on Dom0.
-# The "/etc/xen/scripts/vif-post.d/00-vif-xenguest.hook" called in the end of
-# the vif-nat script will use this file to generate the final dhcpd
-# configuration.
-
-# This file is added in the xenguest image and installed in dom0 under
-# /etc/xenguest/guests/${guestname}/files/dhcpd-params.cfg when the guest
-# image is created.
-# Any customizations to it should be performed by replacing it via a bbappend.
-
-# The \${hostname}, \${mac}, \${vif_ip} and \${router_ip} variables are set in
-# the vif-nat script context. The \${subnetprefix} variable is set in the
-# 00-vif-xenguest.hook script context.
-
-# The "subnet" configuration node is mandatory in order to have the dhcpd
-# properly running.
-
-host ${hostname} {
-    hardware ethernet ${mac};
-    fixed-address ${vif_ip};
-    option routers ${router_ip};
-    option subnet-mask 255.255.255.0;
-    option broadcast-address ${subnetprefix}.255;
-    option domain-name-servers 8.8.8.8;
-    option host-name \"${hostname}\";
-    option domain-name \"example.com\";
-}
-
-subnet ${subnetprefix}.0 netmask 255.255.255.0 {
-}

meta-arm-autonomy/recipes-extended/xenguest/files/kea-dhcp4.conf

@@ -0,0 +1,30 @@
+# This file holds the minimal kea dhcp4 server configuration.
+# It replaces existing kea dhcp configuration file via
+# "/etc/init.d/kea-restore-default-config" on every system boot.
+# The "/etc/xen/scripts/vif-post.d/00-vif-xenguest.hook" called in the end of
+# the vif-nat script will append each xenguest configuration to this file,
+# to generate the final dhcp configuration.
+# This file can be replaced with xenguest-network.bbappend.
+{
+"Dhcp4": {
+    "interfaces-config": {
+        "interfaces": [ ]
+    },
+    "lease-database": {
+        "type": "memfile",
+        "persist": false
+    },
+    "subnet4": [
+        {
+            "subnet": "192.0.2.0/24"
+        }
+    ],
+    "loggers": [
+        {
+            "name": "kea-dhcp4",
+            "output_options": [ { "output": "/var/log/kea-dhcp4.log" } ],
+            "severity": "INFO"
+        }
+    ]
+}
+}