The compilation routine for the kernel has an explicit call to
build version.h, which works fine for most kernels, but the
location of it has recently changes.
commit d183e6f5 [UAPI: Move linux/version.h]
commit 10b63956 [UAPI: Plumb the UAPI Kbuilds into the user
header installation and checking]
moves the file to include/generated/linux/version.h and then to
include/generated/uapi/linux/version.h.
As a result kernel builds of 3.7 or bisection builds of intermediate
kernel commits will fail with:
make[2]: *** No rule to make target `include/linux/version.h'. Stop.
Making the explicit version.h build conditional on the version, or
via a file test would fix the problem, but it introduces some complexity
to the build.
Even without an explicit call to build version.h, it is always produced
by the kernel build, so it can simply be removed.
This extra make line was originally so that the kernel version could be
determined, so that then different instructions could be executed depending
on whether it was a 2.4 or 2.6 kernel. Since we no longer support 2.4, this
code is no longer needed.
[YOCTO: #3293]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow a user to edit the main systemd configuration files and have
them not overwritten at the next upgrade of it.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
else host python is used leading to the following error if the host doesn't
have the python headers installed :
| Python headers are required to build Mercurial
| make: *** [build] Error 1
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
* omf.make is installed by gnome-common
* oe-core gnomebase.bbclass adds gnome-common-native to DEPENDS
* error message was:
| DEBUG: Executing shell function do_configure
| cp: cannot stat `/home/andreas/tmp/oe-core-eglibc/sysroots/overo/usr/share/gnome-common/data/omf.make': No such file or directory
error message was for build from scratch and latest heads:
| ERROR: This autoconf log indicates errors, it looked at host include and/or library paths while determining system capabilities.
| Rerun configure task after fixing this. The path was '/home/Superandy/tmp/oe-core-eglibc/work/armv7a-vfp-neon-angstrom-linux-gnueabi/gvfs-1.8.2-r7.0/gvfs-1.8.2'
| ERROR: Function failed: do_qa_configure
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Caching shouldn't be on by default as it can cause some unpredictable
results in certain situations.
Signed-off-by: Jack Mitchell <jack.mitchell@dbbroadcast.co.uk>
replace oe_run and oe.process with bb.process
gitver got broken by following oe-core commits:
15ad62ab1be060d8a7cdc2d28167ea3af4cfd5d5
d56062cbf92ef206bf06c767befacb66927a9a36
Signed-off-by: Radek Dostal <rd@radekdostal.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
This changes the build system from autotools for cmake so we change
the options to allow it to proper build.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
* Update to 0.4.4, adjusting python module dependencies as appropriate
* Add SUMMARY and DESCRIPTION
* Add LIC_FILES_CHKSUM
* Make LICENSE more accurate
* Fix unpackaged directory warning
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
* Update to 1.16
* Add LIC_FILES_CHKSUM
* Add SUMMARY and extend DESCRIPTION
* Drop PRIORITY
* Drop AUTHOR (generally we don't include this)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Used sed expression given here:
http://lists.linuxtogo.org/pipermail/openembedded-core/2011-November/012373.html
Plus an additional expression for .expand. Full expression is:
sed \
-e 's:bb.data.\(setVar([^,]*,[^,]*\), \([^ )]*\) *):\2.\1):g' \
-e 's:bb.data.\(setVarFlag([^,]*,[^,]*,[^,]*\), \([^) ]*\) *):\2.\1):g' \
-e 's:bb.data.\(getVar([^,]*\), \([^, ]*\) *,\([^)]*\)):\2.\1,\3):g' \
-e 's:bb.data.\(getVarFlag([^,]*,[^,]*\), \([^, ]*\) *,\([^)]*\)):\2.\1,\3):g' \
-e 's:bb.data.\(getVarFlag([^,]*,[^,]*\), \([^) ]*\) *):\2.\1):g' \
-e 's:bb.data.\(getVar([^,]*\), \([^) ]*\) *):\2.\1):g' \
-e 's:bb.data.\(expand([^,]*\), \([^ )]*\) *):\2.\1):g' \
-i `grep -ril bb.data *`
Some minor correction in systemd.bbclass was needed for some expressions
that didn't quite match the regex in the desired way; additionally a few
instances were manually changed.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
hddtemp is unmaintained upstream so we have to do a bit of patching. All
patches sourced from Debian/Fedora, except hddtemp-no-nls-support.patch
which came from OE-Classic.
Other improvements:
* Add initscript from Debian
* Make LICENSE more accurate
* Add LIC_FILES_CHKSUM
* inherit gettext to avoid error during configure
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Uprev traceroute from 2.0.12 in OE-Classic to 2.0.18.
Update SUMMERY, DESCRIPTION, LICENSE, LIC_FILES_CHKSUM, update do_install
to be similar Fedora rpm spec files, and update update alternatives to use
the update alteratives class.
Signed-off-by: Morgan Little <morgan.little@windriver.com>
Clean up recipes to make them easier to read and to allow ntp-ssl to build
* Move common portions to ntp.inc
* Update ntp-ssl to require ntp.inc oppose to ntp_${PV}.bb
* Change ntp-ssl EXTRA_OECONF to append so it won't try to configure snmp as
it will use local paths can cause a error while configuring
Signed-off-by: Morgan Little <morgan.little@windriver.com>
There was a poky distro override to enable the "owl" window menu functionality.
As these packages are in meta-oe now and only Sato/poky supported owl, remove
the override and patches.
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
This introduces a recipe to build hplip 3.12.6 in a simple configuration
aimed at USB printers. It is based on a 3.11.3a recipe for oe classic
by Steve Sakoman.
The hp-setup program is patched to add a small delay after restarting cups,
as on slower embedded systems the cups daemon would sometimes not restart
quickly enough and adding a new printer would sporadically fail.
Tested on an armv6 system (with cups 1.4.6, ghostscript 9.05, foomatic).
Signed-off-by: Marc Reilly <marc@cpdesign.com.au>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
includedir (by way of EXTRA_INCLUDES) gets into the CFLAGS of modphp
via apxs; thus it should not point to a location on the host.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
This includes the patches in use in Debian package to fix color
inversion and other minor issues.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Path replacement was not happening on some machines if the MySQL build
scripts set a different path in the produced mysql_config script,
resulting in host paths being left in.
Original patch by Joe Slater <jslater@windriver.com>.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
autoconf.bbclass forces building po dirs by copying po/Makefile.in.in. We have
to care for libgphoto2_port/po/Makefile.in.in too and have to remove
AM_PO_SUBDIRS() from configure.ac since that causes
| autoreconf: running: aclocal --system-acdir=/home/Superandy/tmp/oe-core-eglibc/work/armv7a-vfp-neon-angstrom-linux-gnueabi/libgphoto2-2.4.11-r2/libgphoto2-2.4.11/aclocal-copy/ --automake-acdir=/home/Superandy/tmp/oe-core-eglibc/sysroots/x86_64-linux/usr/share/aclocal-1.12 -I /home/Superandy/tmp/oe-core-eglibc/work/armv7a-vfp-neon-angstrom-linux-gnueabi/libgphoto2-2.4.11-r2/libgphoto2-2.4.11/auto-m4/ -I /home/Superandy/tmp/oe-core-eglibc/work/armv7a-vfp-neon-angstrom-linux-gnueabi/libgphoto2-2.4.11-r2/libgphoto2-2.4.11/m4m/ -I /home/Superandy/tmp/oe-core-eglibc/work/armv7a-vfp-neon-angstrom-linux-gnueabi/libgphoto2-2.4.11-r2/libgphoto2-2.4.11/auto-m4/ -I /home/Superandy/tmp/oe-core-eglibc/work/armv7a-vfp-neon-angstrom-linux-gnueabi/libgphoto2-2.4.11-r2/libgphoto2-2.4.11/m4m/ --force -I auto-m4 -I m4m
| configure.ac:230: error: `po-directories' is already registered with AC_CONFIG_COMMANDS.
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
The lmsensors project provides hardware health monitoring tools in the
form of kernel drivers, a user-space library and some helper
programs. This recipe provides all the different user-space tools
offered by lmsensors in separete packages. Startup scripts and default
configuration files are also made available through this commit.
The packages consist of (description text from lmsensors documentation):
* lmsensors-libsensors: The user-space sensors support library code.
* lmsensors-sensors: A console tool to report sensor readings and set
new sensor limits.
* lmsensors-sensord: A daemon to watch sensor values and log
problems. It includes RRD support.
* lmsensors-fancontrol: Controls fanspeeds responding to changes on
temperature sensors. Configuration through pwmconfig.
* lmsensors-sensorsdetect: This program tries to detect the available
SMBus adapters and the chips connected to them, as well as Super-I/O
and misc chips.
* lmsensors-sensorsconfconvert: Convert configuration files from
lmsensorsv2 to lmsensorsv3.
* lmsensors-pwmconfig: tests the pwm (pulse width modulation) outputs
of sensors for their effect on the fans and helps to setup the
configfile for fancontrol.
* lmsensors-isatools: This program sets/gets the registers of ISA or
Super-I/O chips.
Signed-off-by: Marc Ferland <ferlandm@sonatest.com>
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Bruce Ashfield
Holger Hans Peter Freyther
Eric BENARD
Andreas Müller
Jack Mitchell
Otavio Salvador
Radek Dostal
Paul Eggleton
Koen Kooi
Martin Jansa
Morgan Little
Ross Burton
Marc Reilly
Marc Ferland
Samuel Stirtzel
Sander van Grieken