Reusing the j784s4.inc file presents problems as the am69-sk platform
does not support GP. So copy the j784s4.inc to am69.inc and update
accordingly.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Currently, the 6.1 kernel is the default. Removing the k3-am69-sk dtb
file only applies to the 6.6 kernel. Restoring this entry so that
current builds work until such time as the 6.1 kernel is removed from
the recipes.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Upstream driver expects Wave5 firmware to be named "wave521c_k3_codec_fw.bin".
Driver probe fails because this compatible isn't being found.
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Separate FAT boot partition holds SPL, SYSFW and U-boot images, while
rootfs places kernel images and DTBs into /boot directory. So it is not
desirable to mount boot FAT partition into /boot directory of the rootfs
and shadow its original content - adjust corresponding entry in wic
templates.
While at it, remove unused ondisk parameter when using use-uuid, which
takes precedence and is more flexible.
Note: boot FAT partition will be automounted at /run/media/boot-mmcblk0p1/
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Reviewed-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The new kernel directory stucture for the DTBs is causing problems when
assembing the image files. It produces errors like this:
output: install: cannot stat 'deploy-ti/images/XXXX-evm/omap/XXXX.dtb': No such file or directory
or
output: install: cannot stat 'deploy-ti/images/XXXX-evm/ti/omap/XXXX.dtb': No such file or directory
The issue comes from the UBOOT_EXTLINUX_BOOT_FILES list. am57 already
had a mechanism but it was missing the omap/ dir to remove, and am33 and
am43 were just takeing KERNEL_DEVICETREE directly. This patch fixes
both cases.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We missed that the KERNEL_DEVICETREE should have been updated for the
32bit platforms with the change in linux-ti-mainline to v6.6. The new
directory structure under arch/arm/boot/dts is in effect for that
version.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This upgrade contains the following changes:
* updated hostapd path in ap_start.sh
* ap_stop.sh removes wlan1 interface
* hostapd.conf updated to work seamlessly with hostapd 2.10
Signed-off-by: Sabeeh Khan <sabeeh-khan@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
It is useful to have U-boot initial environment deployed for future
reference or to initialize environment files as part of the build.
In multiconfig setup, such as TI K3 platforms, building U-boot
multiple times for Cortex-R5 and Cortex-A53 cores results in file
conflicts when deploying under the same name. To avoid that, those
initial-env files were removed at the end of the do_deploy task.
But it is better to only remove them for k3r5 multiconfig, since
that only builds SPL and saved env doesn't make much sense, but
preserve and deploy initial-env for the main machine multiconfig.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
In an attempt to try and better support non-LTS branches, we need to do
a better job at not removing temporary patches too soon from master.
This TODO file should allow us to better schedule the time when the
patches can be safely removed.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add recipe for yamllint. There is an upcoming change in u-boot where
the binman tool is now configured to call yamllint to verify the configs
during compile time.
There was a previous patch a year ago from Trevor Woerner that never
made it into oe-core. This patch is a reworking of his patch but
pointing to a newer version.
We are waiting on this patch to be accepted in oe-core. Once it is
available on master we will remove this recipe to avoid conflict.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Our CICD script inadvertently added the SRCPV back into the recipes.
The script has been fixed, so removing the variable once again.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
New features added require another increase to max_leb_cnt.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Set the KERNEL_DEVICETREE_PREFIX so that, when using the various TI
kernel recipes, the "correct" DTB files are pulled in depending on what
is available in that kernel source.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
am69 and am68 sk boards supports V3Link cameras interfaced via V3Link
camera fusion board. Refer to
commit b7a97b1b (conf: machine: am62axx: Pick overlays for V3Link cameras)
for details
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Acked-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
j722s-evm supports capture from fpdlink cams via fpdlink fusion1 board
or V3Link camera fusion board. So package fpdlink camera overlays
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Like the current TI-RTOS/MCU+ firmware, this is a prebuilt example
firmware for TI K3 remote cores. It is an alternative to the echo test
demo currently provided by "ti-rtos-firmware" recipe. In addition to
supporting rpmsg_client_sample just as the current firmware does, it
also provides:
* A serial console with shell on the MCU UART port
* A console over RPMSG at /dev/ttyRPMSG0
* Example usage of the MCU GPIO/I2C/SPI from this shell
* And many other Zephyr default enabled features..
It does all this using the Zephyr RTOS, a scalable real-time operating
system, optimized for resource constrained devices, and built with
security in mind. Zephyr is a Linux Foundation project. For more
info see here[0][1].
Zephyr firmware like this can also be built as part of the Yocto build
using meta-zephyr. Although this is a prebuilt currently, we intend
to build this from source to reduce meta-ti's dependence on firmware
blobs.
This currently works with the AM62 M4F. Support for additional SoCs
and cores is in progress.
[0] https://www.zephyrproject.org/
[1] https://docs.zephyrproject.org/latest/introduction/index.html
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Update SRCREV for jailhouse recipe which will add changes for Out of Box
demo and also a new application to test whether the linux inmate cell has
crashed or not.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Latest ti-u-boot will be supporting HSSE1.0 and HSFS1.0 versions of the
j7200 soc through the binman dts nodes. Add support in yocto to package
the created binaries in the wic images.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Latest ti-u-boot will be supporting HSSE2.0 and HSFS1.1 versions of the
j721e soc through the binman dts nodes. Add support in yocto to package
the created binaries in the wic images.
Signed-off-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
We have a request to be able to override the beagle kernel set in
PREFERRED_PROVIDER_virtual/kernel, but it is being absolutely set and
not loosely set with ?=. Take this time to create a central include for
all beagle boards like we have for the k3.inc.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This firmware is named so that the correct firmware is chosen on each
machine. No need to split this package for each machine, combine them
into one non-machine-specific package.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The firmware for different machines and versions are named differently so
there is no need to have machine specific packages for each of these
firmwares. Move all the PRU-Switch firmwares into single package.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The firmware for different machines and versions are named differently so
there is no need to have machine specific packages for each of these
firmwares. Move all the PRU-HSR firmwares into single package.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The firmware for different machines and versions are named differently so
there is no need to have machine specific packages for each of these
firmwares. Move all the PRU-ETH firmwares into single package.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Most firmware does not run on the host and is therefor not architecture
specific, at least as far as the package manager is concerned. Although
the firmware might not be useful on some machines, the package itself
is not machine specific. Remove PACKAGE_ARCH.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
update from 0.6.4 to 0.6.6.
This update brings the following fixes from ti-rpmsg-char repo.
55a6f40 remove ti.ipc4.ping-pong reference
8892e57 lib: fix data type build warnings
7c2ab48 lib: fix build warnings
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The new V3Link camera fusion board [1] comes with a CSI to FPDLink
serializer board, which allows interfacing multiple 22-pin FFC
compatible sensors with SK-AM62A.
Currently overlays for interfacing IMX219 sensor with V3Link are built
as part of the TI linux kernel, so pick these in the BSP filesystem.
[1]: https://www.arducam.com/fpd-link-3-cameras/
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Stop using UBOOT_LOCALVERSION, and copy what is done in the kernel recipe. This
allows us to set the correct SHA into the version string even if AUTOREV is used
since SRCPV is no longer set in oe-core.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The use of KERNEL_LOCALVERSION for controlling the kernel version has
changed recently. Placing the value of KERNEL_LOCALVERSION in
.scmversion was causing it to duplicate the string in the final version.
Instead, drop KERNEL_LOCALVERSION to just identify that it comes from
TI, and that it is an RT kernel. Additionally, place the commit sha for
the kernel into the .scmversion file explicitly to be both backward and
forward compatible.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This patch moves the jailhouse recipe general variables to a
ti-jailhouse.inc file along with fetch and compile task.
Jailhouse repo also contains some demo applications which can
be packaged alone in filesytem and does not require packaging
jailhouse module, firmware and tool.
So add a new recipe jailhouse-inmate which can be used to only
package those demos. The existing jailhouse recipe will contain
variables and other dependencies needed for do_install task for
jailhouse module, tools, demos etc. The do_install of jailhouse
inmate recipe will only package demo applications.
This new recipe(jailhouse-inmate) will be added to a new image
in meta-arago. The new image will be used for jailhouse second
linux instance or cell.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* Update linux-bb.org to 6.1.69 for both 32 and 64 bit platforms
* Update u-boot-bb.org to the latest 2023.04 based on SDK 9.1 release
* Update DTB/DTBO lists to include latest renames and additions
Note: all changes are in a single commit for bisectability
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Upstream now includes all DTB/DTBO files recursively, no need to extend
corresponding FILES list.
Revert "linux-bb.org: also package DT overlays in separate dir"
This reverts commit f22ea63f66.
Note: adjust SRC_URI cosmetically, so it now matches kirkstone
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Ryan Eatmon
LCPD Automation Script
Beleswar Padhi
Brandon Brnich
Denys Dmytriyenko
Sabeeh Khan
Chirag Shilwant
Rahul T R
Andrew Davis
Paresh Bhagat
Aniket Limaye
Praneeth Bajjuri
Udit Kumar
Jai Luthra