* The GP variant of AM62A SoC was only used internally
for initial device bring-up and is not publicly available.
Hence, drop it from IMAGE_BOOT_FILES to ensure
tiboot3-am62ax-gp-evm.bin is not packaged inside vfat boot
partition of wic image
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Reviewed-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
New features added under meta-tisdk [0] require another
increase to max_leb_cnt.
[0]: 3985a7caea
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* U-Boot reads the bootsplash image file from the vfat boot partition
& displays it during boot-up showcasing early splash screen support.
* There's no significance of having an additional do_install
as the logo file need not be added in the rootfs/image.
* Fixes 277f04df4c & 1fed958bfe
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
FIT_CONF_DEFAULT_DTB config specifies the default dtb file for the
FITimage when multiple ones are provided[1].
Legacyhs fitimage does not currently support this feature set which is
required for repurposing the same class for falcon boot.
This patch adds support for FIT_CONF_DEFAULT_DTB without affecting
existing platforms that rely on legacyhs fitImage.
[1]:
https://docs.yoctoproject.org/ref-manual/variables.html#term-FIT_CONF_DEFAULT_DTB
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Add a recipe to deploy the HSM demo firmware to the DEPLOYDIR, to be
picked up by the tisdk-core-bundle for the prebuilt binaries directory.
This firmware is then further picked by U-Boot and packaged inside
tispl.bin FIT image for loading the HSM M4 core in applicable SoCs.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
* New features added under meta-tisdk [0] require another
increase to max_leb_cnt.
* This patch fixes following errors observed with 11.00.09.04
tag on meta-tisdk,
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
This patch adds prefix string for eqep overlay to
KERNEL_DEVICETREE_PREFIX.
Signed-off-by: Judith Mendez <jm@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump the srcrev to include a fix for events where the driver is
requested to show advanced information about file descriptors that are
associated with the device but are not currently associated with a
rendering task.
This should address the kernel fault in pvr_show_fdinfo associated with
fdinfo/lsof.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Fix the package config params to make it obvious what combinations are
allowed. Also, rework the way we are inheriting init related classes so
that we don't accidentally do any additional postinstall steps. While
we're at it, don't execute anything for the compile or configure stage.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
FIT_CONF_DEFAULT_DTB config specifies the default dtb file for the FIT
image when multiple ones are provided[1].
Since the variable is not set in current machine configs, the default is
set to the first dtb read during FIT image creation which doesn't give
us direct control over the default configuration.
Therefore this patch adds default dtbs for am62 evms.
[1]:
https://docs.yoctoproject.org/ref-manual/variables.html#term-FIT_CONF_DEFAULT_DTB
Signed-off-by: Anshul Dalal <anshuld@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
To facilitate better testing we need to control all aspects of the
SRC_URI. Create TI_LINUX_FW_GIT_URI, TI_LINUX_FW_GIT_PROTOCOL, and
TI_LINUX_FW_GIT_BRANCH and build SRC_URI using them.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The user mode libraries needed recompiling with the scarthgap revision of gcc to
remove all the warnings about 32bit API usage during the linking stage, new
SRCREV includes this changes. Versions of the libraries remain the same.
Signed-off-by: Antonios Christidis <a-christidis@ti>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
MACHINE_FEATURE gc320, already gets set on omap-a15.inc. But ti-bsp.inc file,
removes the feature. So, remove that portion of functionality from ti-bsp, in
order to allow the building of gc320 in kernel 6.12.
Signed-off-by: Antonios Christidis <a-christidis@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Changes made on the gc320 kernel mode driver in order to work with kernel
6.12. There is no other change in functionality with this update, and the
driver version remains the same.
Signed-off-by: Antonios Christidis <a-christidis@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Bump SRCREV to include a patch that changes the way
compiler_preferred_target is selected for a given toolchain. This now
checks specified SYS_CFLAGS to see if hardfloat is set explicitly and
will override the default target selection if necessary.
Signed-off-by: Randolph Sapp <rs@ti.com>
Tested-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The meta-arm layer, which is the provider of the base recipe for
optee-os, added [1] a separate optee-os-ta package for the embedded TAs
that are compiled as part of the OPTEE OS build process. However, the
TI overrides for optee-os include the embedded TAs inside the base
package, leaving the optee-os-ta package empty (and thus not
installable).
Align to the meta-arm behaviour and simply add a runtime dependency on
optee-os-ta for optee-os. While keeping backward compatibility, this
allows to install only the embedded TAs - reducing the required disk
space - on platforms on which the OPTEE OS is loaded from an external
boot image rather than being fetched from the root filesystem, like the
K3 SoCs.
[1] https://patchwork.yoctoproject.org/project/arm/patch/20230630112340.3314395-1-r.czerwinski@pengutronix.de/
Signed-off-by: Francesco Valla <francesco@valla.it>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Correct SRCREV for jailhouse which currently points to an unpublished
commit hash.
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Out-of-tree module failing to build against linux-next as a result of
changes to platform driver remove function.
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Fix OS APM interactions when uninitialized. Because this driver uses
lazy initialization, if the GPU is never given a task it will not be
initialized. Even if the device is not fully initialized it is still
registered with the DRM subsystem and capable of receiving OS APM
signals.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Well, this is the evil vendor driver. Time to start acting like it.
Blacklist the upstream powervr module if this driver is present.
This patch also does away with the bin_package components. It was cool
and found some interesting bugs, but we might as well start leveraging
that Makefile more now that we're starting to get some more common
files between devices.
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Module recipe is missing SUMMARY and a proper SRC_URI leading to
warnings during the build process.
Fixes: 296344c8 ("ti-bsp: ti-img-encode-decode: Add Recipe for Building VXE-VXD Out-of-Tree Module")
Reported-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The new out of tree module ti-vxe-vxd-driver is only for the 6.12 kernel
and later. Since we support multiple BSPs we need to correctly wrap
this addition behind some additional logic that can make sure to not
include it for the 6.1 and 6.6 kernel builds where the module is still
in the tree.
Additionally, fix up the beaglebone-ai64 since it includes the j721e.inc
file and will need to clear this variable for its BSPs as well.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
Rather than using COMPATIBLE_HOST move to using COMPATIBLE_MACHINE to
limit the recipe to being TI specific. Also, this package is "k3"
specific so further limit it down to just those matching machines and
not all TI SOCs.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The previous commit incorrectly added the k3-j721s2-evm-ub954.dtbo to
the KERNEL_DEVICETREE and it was missed during a quick review.
The correct way to add dtbs is to add a prefix string to the
KERNEL_DEVICETREE_PREFIX variable so that all files that match the
string will be picked up. This allows for multiple kernels to be
swapped out that may have different DTBs in their respective trees and
not break a build.
The upstream testing on the kernel will automatically update the
KERNEL_DEVICETREE variable when the final kernel version is available.
That way the KERNEL_DEVICETREE always points to what is available in the
mainline.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
The previous commit incorrectly added the k3-j721e-evm-ub954.dtbo to
the KERNEL_DEVICETREE and it was missed during a quick review.
The correct way to add dtbs is to add a prefix string to the
KERNEL_DEVICETREE_PREFIX variable so that all files that match the
string will be picked up. This allows for multiple kernels to be
swapped out that may have different DTBs in their respective trees and
not break a build.
The upstream testing on the kernel will automatically update the
KERNEL_DEVICETREE variable when the final kernel version is available.
That way the KERNEL_DEVICETREE always points to what is available in the
mainline.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
IMG codec drivers reside only on the J721e SoC. Ensure that the drivers
are being built when building SDK.
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
During 10.0 LTS bringup, the decision was made that it would be the last LTS
that carried the IMG VXE and VXD driver in tree. Driver is now hosted on
git.ti.com. This recipe is responsible for pulling in the driver,
building it, and packaging it within the J721e SDK.
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
All K3 SoCs utilize the binman packaging tools in U-Boot to package
and sign the different boot firmware components needed to boot the
various security variants of K3 platform. Disable UBOOT_SIGN_ENABLE
to simplify the build
Signed-off-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
DS90UB954-Q1EVM can be used to connect FPDLink-III based sensors to
TI EVMs. So pick the DS90UB954-Q1EVM overlay.
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
DS90UB954-Q1EVM can be used to connect FPDLink-III based sensors to
TI EVMs. So pick the DS90UB954-Q1EVM overlay.
Signed-off-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
OPTEE support for the am62lxx is still in progress.
Therefore, temporarily set TFA_SPD to empty to avoid
using any SPD (Secure Payload Dispatcher) services.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
2025-02-21 10:10:43 -06:00
33 changed files with 160 additions and 72 deletions
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
