libdrm: restore libdrm-tests package that got missed with TI version

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

.gitignore

@@ -1,6 +0,0 @@
-*.pyc
-*.pyo
-*.swp
-*.orig
-*.rej
-*~

README

@@ -1,4 +1,30 @@
-Collection of layers for the OE-core universe
+The official OpenEmbedded/Yocto BSP layer for Texas Instruments platforms.
 
-Please see the respective READMEs in the layer subdirectories
+It is hosted on http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/ with the
+source repository at git://git.yoctoproject.org/meta-ti
 
+
+This layer depends on:
+
+URI: git://git.openembedded.org/openembedded-core
+layers: meta
+branch: master
+
+
+When not depending on meta-openembedded and not using systemd, you may need to
+mask few miscellaneous recipes requiring systemd, by adding this to local.conf:
+
+BBMASK = "meta-ti/recipes-misc"
+
+
+The base BSP part of meta-ti should work with different OpenEmbedded/Yocto
+distributions and layer stacks, such as:
+distro-less (only with OE-Core), with Yocto/Poky, with Angstrom or Arago.
+
+Please follow the recommended setup procedures of your OE distribution.
+
+
+Send pull requests, patches, comments or questions to meta-ti@yoctoproject.org
+
+Maintainers: Denys Dmytriyenko <denys@ti.com>
+             Koen Kooi <koen@dominion.thruhere.net>

check_yocto_rules.json

@@ -1,32 +0,0 @@
-{
-    "APPEND-1" : {
-        "skip_vars" : [ "ALTERNATIVE", "FILES", "INSANE_SKIP", "RDEPENDS", "RRECOMMENDS" ]
-    },
-    "APPEND-2" : {
-        "skip_vars" : [ "KERNEL_LOCALVERSION", "PR", "PV" ],
-        "file_regex" : {
-            "meta-ti-bsp\\/recipes-graphics\\/mesa\\/mesa-pvr_\\S+\\.bb" : {
-                "skip_vars": [ "GALLIUMDRIVERS", "VULKAN_DRIVERS" ]
-            },
-            "meta-ti-bsp\\/recipes-graphics\\/mesa\\/mesa-pvr\\.inc" : {
-                "skip_vars": [ "TOOLS", "TOOLS_DEPS", "GALLIUMDRIVERS", "VULKAN_DRIVERS" ]
-            }
-        }
-    },
-    "GUARD-1" : {
-        "skip_files" : [
-            "meta-ti-bsp/recipes-core/udev/eudev_%.bbappend",
-            "meta-ti-bsp/recipes-devtools/binutils/binutils-cross-canadian_%.bbappend",
-            "meta-ti-bsp/recipes-security/optee/optee-%.bbappend",
-            "meta-ti-bsp/dynamic-layers/openembedded-layer/recipes-bsp/u-boot/u-boot-ti-%.bbappend"
-        ]
-    },
-    "GUARD-2" : {
-        "skip_vars" : [ "k3" , "ti-soc" ]
-    },
-    "SUMMARY-1" : {
-        "skip_files" : [
-            "meta-ti-extras/recipes-ti/ipc/ti-ipc-rtos_git.bb"
-        ]
-    }
-}

classes/sdcard_image.bbclass

@@ -0,0 +1,156 @@
+inherit image
+
+# Add the fstypes we need
+IMAGE_FSTYPES_append = " tar.bz2 sdimg"
+
+# Ensure required utilities are present
+IMAGE_DEPENDS_sdimg = "genext2fs-native e2fsprogs-native"
+
+# Change this to match your host distro
+LOSETUP ?= "/sbin/losetup"
+
+# Since these need to go in /etc/fstab we can hardcode them
+# Since the vars are weakly assigned, you can override them from your local.conf
+LOOPDEV ?= "/dev/loop1"
+LOOPDEV_BOOT ?= "/dev/loop2"
+LOOPDEV_FS ?= "/dev/loop3"
+
+# Default to 4GiB images
+SDIMG_SIZE ?= "444" 
+
+# FS type for rootfs
+ROOTFSTYPE ?= "ext4"
+
+BOOTPARTNAME_beaglebone = "BEAGLE_BONE"
+BOOTPARTNAME ?= "${MACHINE}"
+
+IMAGEDATESTAMP = "${@time.strftime('%Y.%m.%d',time.gmtime())}"
+
+# Files and/or directories to be copied into the vfat partition
+FATPAYLOAD ?= ""
+
+IMAGE_CMD_sdimg () {
+	SDIMG=${WORKDIR}/sd.img
+
+	# sanity check fstab entry for boot partition mounting
+	if [ "x$(cat /etc/fstab | grep ${LOOPDEV_BOOT} | grep ${WORKDIR}/tmp-mnt-boot | grep user || true)" = "x" ]; then
+		echo "/etc/fstab entries need to be created with the user flag for the loop devices like:"
+		echo "${LOOPDEV_BOOT} ${WORKDIR}/tmp-mnt-boot vfat user 0 0"
+        false
+	fi
+
+	# cleanup loops
+	for loop in ${LOOPDEV} ${LOOPDEV_BOOT} ${LOOPDEV_FS} ; do
+		${LOSETUP} -d $loop || true
+	done
+
+	# If an SD image is already present, reuse and reformat it
+	if [ ! -e ${SDIMG} ] ; then
+		dd if=/dev/zero of=${SDIMG} bs=$(echo '255 * 63 * 512' | bc) count=${SDIMG_SIZE}
+	fi
+
+	${LOSETUP} ${LOOPDEV} ${SDIMG}
+
+	# Create partition table
+	dd if=/dev/zero of=${LOOPDEV} bs=1024 count=1024
+	SIZE=$(/sbin/fdisk -l ${LOOPDEV} | grep Disk | grep bytes | awk '{print $5}')
+	CYLINDERS=$(echo $SIZE/255/63/512 | bc)
+	{
+	echo ,9,0x0C,*
+	echo ,,,-
+	} | /sbin/sfdisk -D -H 255 -S 63 -C ${CYLINDERS} ${LOOPDEV}
+
+	# Prepare loop devices for boot and filesystem partitions
+	BOOT_OFFSET=32256
+	FS_OFFSET_SECT=$(/sbin/fdisk -l -u ${LOOPDEV} 2>&1 | grep Linux | perl -p -i -e "s/\s+/ /"|cut -d " " -f 2)
+	FS_OFFSET=$(echo "$FS_OFFSET_SECT * 512" | bc)
+	FS_SIZE_BLOCKS=$(/sbin/fdisk -l -u ${LOOPDEV} 2>&1 | grep Linux | perl -p -i -e "s/\s+/ /g" \ 
+	|cut -d " " -f 4 | cut -d "+" -f 1)
+ 
+	LOOPDEV_BLOCKS=$(/sbin/fdisk -l -u ${LOOPDEV} 2>&1 | grep FAT | perl -p -i -e "s/\s+/ /g"|cut -d " " -f 5)
+	LOOPDEV_BYTES=$(echo "$LOOPDEV_BLOCKS * 1024" | bc)
+
+	${LOSETUP} -d ${LOOPDEV}
+
+	${LOSETUP} ${LOOPDEV_BOOT} ${SDIMG} -o ${BOOT_OFFSET} 
+
+	/sbin/mkfs.vfat ${LOOPDEV_BOOT} -n ${BOOTPARTNAME} $LOOPDEV_BLOCKS
+
+	# Prepare filesystem partition
+	# Copy ubi used by flashing scripts
+	if [ -e  ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ] ; then
+		echo "Copying UBIFS image to file system"
+		cp ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ${IMAGE_ROOTFS}/boot/fs.ubi
+	fi
+
+	# Prepare boot partion. First mount the boot partition, and copy the boot loader and supporting files
+	# from the root filesystem
+
+	mkdir -p ${WORKDIR}/tmp-mnt-boot
+	mount $LOOPDEV_BOOT ${WORKDIR}/tmp-mnt-boot
+
+	echo "Copying bootloaders into the boot partition"
+	if [ -e ${IMAGE_ROOTFS}/boot/MLO ] ; then
+		cp -v ${IMAGE_ROOTFS}/boot/MLO ${WORKDIR}/tmp-mnt-boot 
+	else
+		cp -v ${DEPLOY_DIR_IMAGE}/MLO ${WORKDIR}/tmp-mnt-boot
+	fi
+
+	# Check for u-boot SPL
+	if [ -e ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.img ] ; then
+		suffix=img
+	else
+		suffix=bin
+	fi
+
+	cp -v ${IMAGE_ROOTFS}/boot/uEnv.txt ${WORKDIR}/tmp-mnt-boot || true
+	cp -v ${IMAGE_ROOTFS}/boot/user.txt ${WORKDIR}/tmp-mnt-boot || true
+	cp -v ${IMAGE_ROOTFS}/boot/uImage ${WORKDIR}/tmp-mnt-boot || true
+
+	if [ -e ${IMAGE_ROOTFS}/boot/u-boot.$suffix ] ; then
+		cp -v ${IMAGE_ROOTFS}/boot/{u-boot.$suffix} ${WORKDIR}/tmp-mnt-boot || true
+	else
+		cp -v ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.$suffix ${WORKDIR}/tmp-mnt-boot/u-boot.$suffix 
+	fi
+
+	if [ -n ${FATPAYLOAD} ] ; then
+		echo "Copying payload into VFAT"
+		for entry in ${FATPAYLOAD} ; do
+				# add the || true to stop aborting on vfat issues like not supporting .~lock files
+				cp -av ${IMAGE_ROOTFS}$entry ${WORKDIR}/tmp-mnt-boot || true
+		done
+	fi
+
+	echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${IMAGE_ROOTFS}/etc/image-version-info
+
+	# Cleanup VFAT mount
+	echo "Cleaning up VFAT mount"
+	umount ${WORKDIR}/tmp-mnt-boot
+	${LOSETUP} -d ${LOOPDEV_BOOT} || true
+
+	# Prepare rootfs parition
+	echo "Creating rootfs loopback"
+	${LOSETUP} ${LOOPDEV_FS} ${SDIMG} -o ${FS_OFFSET}
+
+	FS_NUM_INODES=$(echo $FS_SIZE_BLOCKS / 4 | bc)
+
+	case "${ROOTFSTYPE}" in
+		ext3)
+				genext2fs -z -N $FS_NUM_INODES -b $FS_SIZE_BLOCKS -d ${IMAGE_ROOTFS} ${LOOPDEV_FS}
+				tune2fs -L ${IMAGE_NAME} -j ${LOOPDEV_FS}
+				;;
+		ext4)
+				genext2fs -z -N $FS_NUM_INODES -b $FS_SIZE_BLOCKS -d ${IMAGE_ROOTFS} ${LOOPDEV_FS}
+				tune2fs -L ${IMAGE_NAME} -j -O extents,uninit_bg,dir_index ${LOOPDEV_FS}
+				;;
+		*)
+				echo "Please set ROOTFSTYPE to something supported"
+				exit 1
+				;;
+	esac
+
+	${LOSETUP} -d ${LOOPDEV_FS} || true
+
+	gzip -c ${WORKDIR}/sd.img > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}-${IMAGEDATESTAMP}.img.gz
+	rm -f ${WORKDIR}/sd.img
+}

conf/layer.conf

@@ -0,0 +1,9 @@
+# We have a conf and classes directory, append to BBPATH
+BBPATH .= ":${LAYERDIR}"
+
+# We have a recipes directory, add to BBFILES
+BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
+
+BBFILE_COLLECTIONS += "meta-ti"
+BBFILE_PATTERN_meta-ti := "^${LAYERDIR}/"
+BBFILE_PRIORITY_meta-ti = "6"

conf/machine/am180x-evm.conf

@@ -0,0 +1,18 @@
+#@TYPE: Machine
+#@NAME: AM180x CPUs on an AM180x EVM board
+#@DESCRIPTION: Machine configuration for the TI AM180x EVM board
+
+require conf/machine/include/davinci.inc
+require conf/machine/include/omapl138.inc
+
+UBOOT_MACHINE = "da850evm_config"
+UBOOT_ENTRYPOINT = "0xc0008000"
+UBOOT_LOADADDRESS = "0xc0008000"
+
+IMAGE_FSTYPES += "tar.gz ubi"
+
+SERIAL_CONSOLE = "115200 ttyS2"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-omapl138-psp"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am180x"
+PREFERRED_PROVIDER_u-boot = "u-boot-am180x"

conf/machine/am335x-evm.conf

@@ -0,0 +1,35 @@
+#@TYPE: Machine
+#@NAME: AM335x EVM
+#@DESCRIPTION: Machine configuration for the TI AM335x EVM
+
+require conf/machine/include/ti33x.inc
+
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen"
+
+IMAGE_FSTYPES += "ubi tar.gz"
+
+SERIAL_CONSOLE = "115200 ttyO0"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1988 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3836"
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+# UBI: VID header offset:          2048 (aligned 2048)
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"

conf/machine/am3517-evm.conf

@@ -0,0 +1,40 @@
+#@TYPE: Machine
+#@NAME: AM3517 EVM
+#@DESCRIPTION: Machine configuration for the TI Sitara AM3517 EVM
+
+require conf/machine/include/omap3.inc
+
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen ethernet"
+
+IMAGE_FSTYPES += "ubi tar.gz"
+EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
+
+SERIAL_CONSOLE = "115200 ttyO2"
+USE_VT = "2"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
+
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am3517"
+PREFERRED_PROVIDER_u-boot = "u-boot-am3517"
+
+UBOOT_MACHINE = "am3517_evm_config"
+XLOAD_MACHINE = "am3517evm_config"
+
+# NOTE: there are NAND and OneNAND versions of this board...
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    129024 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1996 LEBs
+MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"

conf/machine/am37x-evm.conf

@@ -0,0 +1,35 @@
+#@TYPE: Machine
+#@NAME: AM37x EVM
+#@DESCRIPTION: Machine configuration for the TI AM37x EVM
+
+require conf/machine/include/omap3.inc
+
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen ethernet"
+
+IMAGE_FSTYPES += "ubi tar.gz"
+EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
+
+SERIAL_CONSOLE = "115200 ttyO0"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am37x"
+PREFERRED_PROVIDER_u-boot = "u-boot-am37x"
+
+# NOTE: there are NAND and OneNAND versions of this board...
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    129024 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1996 LEBs
+MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"

conf/machine/beagleboard.conf

@@ -0,0 +1,40 @@
+#@TYPE: Machine
+#@NAME: Beagleboard machine
+#@DESCRIPTION: Machine configuration for the http://beagleboard.org/ board 
+
+require conf/machine/include/omap3.inc
+
+# Only has DVI connector for external screen
+GUI_MACHINE_CLASS = "bigscreen"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-mainline"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-beagleboard"
+PREFERRED_PROVIDER_u-boot = "u-boot-beagleboard"
+
+IMAGE_FSTYPES += "tar.gz ubi"
+EXTRA_IMAGECMD_jffs2 = "-lnp"
+
+SERIAL_CONSOLE = "115200 ttyO2"
+
+UBOOT_MACHINE = "omap3_beagle_config"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    129024 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1996 LEBs
+# 
+# Beagleboard C5 has 3998 LEBS (490MiB)
+MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"
+
+# For a modularized kernel we want to drag in networking, sound, rtc etc."
+MACHINE_EXTRA_RRECOMMENDS = "kernel-module-smsc95xx kernel-module-snd-soc-twl4030 kernel-module-rtc-twl \
+  kernel-module-snd-soc-omap kernel-module-snd-soc-omap-mcbsp kernel-module-snd-soc-omap3beagle"

conf/machine/beaglebone.conf

@@ -0,0 +1,14 @@
+#@TYPE: Machine
+#@NAME: BeagleBone machine
+#@DESCRIPTION: Machine configuration for the http://beagleboard.org/bone board 
+
+require conf/machine/include/ti33x.inc
+
+# Only has DVI connector for external screen
+GUI_MACHINE_CLASS = "bigscreen"
+
+IMAGE_FSTYPES += "tar.gz"
+
+SERIAL_CONSOLE = "115200 ttyO0"
+
+UBOOT_MACHINE = "am335x_evm_config"

conf/machine/dra7xx-evm.conf

@@ -0,0 +1,39 @@
+#@TYPE: Machine
+#@NAME: DRA7xx EVM
+#@DESCRIPTION: Machine configuration for the TI DRA7xx EVM
+
+require conf/machine/include/omap-a15.inc
+
+IMAGE_FSTYPES += "ubi tar.gz"
+
+SERIAL_CONSOLE = "115200 ttyO0"
+
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-dra7xx"
+PREFERRED_PROVIDER_u-boot = "u-boot-dra7xx"
+
+UBOOT_MACHINE = "dra7xx_evm_config"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1988 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3836"
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+# UBI: VID header offset:          2048 (aligned 2048)
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
+
+# Currently removing the sgx machine feature because there is no SGX package
+# available for omap5
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"

conf/machine/include/davinci.inc

@@ -0,0 +1,21 @@
+require conf/machine/include/tune-arm926ejs.inc
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r53"
+
+KERNEL_IMAGETYPE = "uImage"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-davinci"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
+
+UBOOT_MACHINE = "davinci_dvevm_config"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+EXTRA_IMAGEDEPENDS += "u-boot"
+
+SERIAL_CONSOLE ?= "115200 ttyS0"
+EXTRA_IMAGECMD_jffs2 = "--pad --little-endian --eraseblock=0x20000 -n"
+
+MACHINE_FEATURES = "kernel26 serial ethernet usbhost usbgadget mmc alsa"

conf/machine/include/keystone.inc

@@ -0,0 +1,23 @@
+SOC_FAMILY = "keystone"
+require conf/machine/include/soc-family.inc
+
+require conf/machine/include/tune-cortexa15.inc
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-keystone"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-keystone"
+PREFERRED_PROVIDER_u-boot = "u-boot-keystone"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r6"
+
+KERNEL_IMAGETYPE = "uImage"
+
+UBOOT_MACHINE = "tci6638_evm_config"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+EXTRA_IMAGEDEPENDS += "u-boot"
+EXTRA_IMAGEDEPENDS += "boot-monitor"
+
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat"

conf/machine/include/omap-a15.inc

@@ -0,0 +1,26 @@
+SOC_FAMILY = "omap-a15"
+require conf/machine/include/soc-family.inc
+
+require conf/machine/include/tune-cortexa15.inc
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r1"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+KERNEL_IMAGETYPE = "uImage"
+
+UBOOT_ARCH = "arm"
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+EXTRA_IMAGEDEPENDS += "virtual/bootloader"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-video-fbdev"
+
+GUI_MACHINE_CLASS = "smallscreen"

conf/machine/include/omap3.inc

@@ -0,0 +1,38 @@
+SOC_FAMILY = "omap3"
+require conf/machine/include/soc-family.inc
+
+require conf/machine/include/tune-cortexa8.inc
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+
+# For built-in LCD, add xf86-input-tslib
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-omapfb \
+           xf86-input-keyboard"
+
+# Default to external video, change to smallscreen for built-in LCD
+GUI_MACHINE_CLASS = "bigscreen"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r125"
+
+KERNEL_IMAGETYPE = "uImage"
+
+# Default providers, may need to override for specific machines
+PREFERRED_PROVIDER_virtual/kernel = "linux-omap"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
+
+UBOOT_ARCH = "arm"
+UBOOT_MACHINE = "omap3_evm_config"
+XLOAD_MACHINE = "omap3evm_config"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+# If SPL is not used, may need to add x-load
+EXTRA_IMAGEDEPENDS += "u-boot"
+
+# List common SoC features, may need to add touchscreen/ethernet for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa sgx"

conf/machine/include/omap4.inc

@@ -0,0 +1,28 @@
+SOC_FAMILY = "omap4"
+require conf/machine/include/soc-family.inc
+
+require conf/machine/include/tune-cortexa9.inc
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-omap4"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+XSERVER = "xserver-xorg \
+           xserver-xorg-extension-dri \
+           xserver-xorg-extension-dri2 \
+           xserver-xorg-extension-glx \
+           xserver-xorg-module-exa \
+           xf86-input-evdev \
+           xf86-video-omap"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r1"
+
+KERNEL_IMAGETYPE = "uImage"
+
+UBOOT_MACHINE = "omap4_panda_config"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+EXTRA_IMAGEDEPENDS += "u-boot"

conf/machine/include/omapl138.inc

@@ -0,0 +1,2 @@
+SOC_FAMILY = "omapl138"
+require conf/machine/include/soc-family.inc

conf/machine/include/ti33x.inc

@@ -0,0 +1,37 @@
+SOC_FAMILY = "ti33x"
+require conf/machine/include/soc-family.inc
+
+require conf/machine/include/tune-cortexa8.inc
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+
+# For built-in LCD, add xf86-input-tslib
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-video-fbdev \
+           xf86-input-keyboard"
+
+# Default to external video, change to smallscreen for built-in LCD
+GUI_MACHINE_CLASS = "bigscreen"
+
+# Increase this everytime you change something in the kernel
+MACHINE_KERNEL_PR = "r19"
+
+# Default providers, may need to override for specific machines
+PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
+PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+
+KERNEL_IMAGETYPE = "uImage"
+
+UBOOT_ARCH = "arm"
+UBOOT_MACHINE = "am335x_evm_config"
+
+UBOOT_ENTRYPOINT = "0x80008000"
+UBOOT_LOADADDRESS = "0x80008000"
+
+EXTRA_IMAGEDEPENDS += "u-boot"
+
+# List common SoC features, may need to add touchscreen for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet sgx"

conf/machine/include/tune-cortexa15.inc

@@ -0,0 +1,36 @@
+DEFAULTTUNE ?= "armv7a-neon"
+
+require conf/machine/include/arm/arch-armv7a.inc
+
+TUNEVALID[cortexa15] = "Enable Cortex-A15 specific processor optimizations"
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa15", "-mtune=cortex-a15", "", d)}"
+
+# Little Endian base configs
+AVAILTUNES += "cortexa15 cortexa15t cortexa15-neon cortexa15t-neon"
+ARMPKGARCH_tune-cortexa15 = "cortexa15"
+ARMPKGARCH_tune-cortexa15t = "cortexa15"
+ARMPKGARCH_tune-cortexa15-neon = "cortexa15"
+ARMPKGARCH_tune-cortexa15t-neon = "cortexa15"
+TUNE_FEATURES_tune-cortexa15 = "${TUNE_FEATURES_tune-armv7a} cortexa15"
+TUNE_FEATURES_tune-cortexa15t = "${TUNE_FEATURES_tune-armv7at} cortexa15"
+TUNE_FEATURES_tune-cortexa15-neon = "${TUNE_FEATURES_tune-armv7a-neon} cortexa15"
+TUNE_FEATURES_tune-cortexa15t-neon = "${TUNE_FEATURES_tune-armv7at-neon} cortexa15"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a} cortexa15-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} cortexa15-vfp cortexa15t2-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} cortexa15-vfp cortexa15-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15t-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7at-neon} cortexa15-vfp cortexa15-vfp-neon cortexa15t2-vfp cortexa15t2-vfp-neon"
+
+# VFP Tunes
+AVAILTUNES += "cortexa15hf cortexa15thf cortexa15hf-neon cortexa15thf-neon"
+ARMPKGARCH_tune-cortexa15hf = "cortexa15"
+ARMPKGARCH_tune-cortexa15thf = "cortexa15"
+ARMPKGARCH_tune-cortexa15hf-neon = "cortexa15"
+ARMPKGARCH_tune-cortexa15thf-neon = "cortexa15"
+TUNE_FEATURES_tune-cortexa15hf ?= "${TUNE_FEATURES_tune-armv7ahf} cortexa15"
+TUNE_FEATURES_tune-cortexa15thf ?= "${TUNE_FEATURES_tune-armv7athf} cortexa15"
+TUNE_FEATURES_tune-cortexa15hf-neon ?= "${TUNE_FEATURES_tune-armv7ahf-neon} cortexa15"
+TUNE_FEATURES_tune-cortexa15thf-neon ?= "${TUNE_FEATURES_tune-armv7athf-neon} cortexa15"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf} cortexa15hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} cortexa15hf-vfp cortexa15t2hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon} cortexa15hf-vfp cortexa15hf-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15thf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon} cortexa15hf-vfp cortexa15hf-vfp-neon cortexa15t2hf-vfp cortexa15t2hf-vfp-neon"

conf/machine/include/tune-cortexa7.inc

@@ -0,0 +1,36 @@
+DEFAULTTUNE ?= "armv7a-neon"
+
+require conf/machine/include/arm/arch-armv7a.inc
+
+TUNEVALID[cortexa7] = "Enable Cortex-A7 specific processor optimizations"
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa7", "-mtune=cortex-a7", "", d)}"
+
+# Little Endian base configs
+AVAILTUNES += "cortexa7 cortexa7t cortexa7-neon cortexa7t-neon"
+ARMPKGARCH_tune-cortexa7 = "cortexa7"
+ARMPKGARCH_tune-cortexa7t = "cortexa7"
+ARMPKGARCH_tune-cortexa7-neon = "cortexa7"
+ARMPKGARCH_tune-cortexa7t-neon = "cortexa7"
+TUNE_FEATURES_tune-cortexa7 = "${TUNE_FEATURES_tune-armv7a} cortexa7"
+TUNE_FEATURES_tune-cortexa7t = "${TUNE_FEATURES_tune-armv7at} cortexa7"
+TUNE_FEATURES_tune-cortexa7-neon = "${TUNE_FEATURES_tune-armv7a-neon} cortexa7"
+TUNE_FEATURES_tune-cortexa7t-neon = "${TUNE_FEATURES_tune-armv7at-neon} cortexa7"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a} cortexa7-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} cortexa7-vfp cortexa7t2-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} cortexa7-vfp cortexa7-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7t-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7at-neon} cortexa7-vfp cortexa7-vfp-neon cortexa7t2-vfp cortexa7t2-vfp-neon"
+
+# VFP Tunes
+AVAILTUNES += "cortexa7hf cortexa7thf cortexa7hf-neon cortexa7thf-neon"
+ARMPKGARCH_tune-cortexa7hf = "cortexa7"
+ARMPKGARCH_tune-cortexa7thf = "cortexa7"
+ARMPKGARCH_tune-cortexa7hf-neon = "cortexa7"
+ARMPKGARCH_tune-cortexa7thf-neon = "cortexa7"
+TUNE_FEATURES_tune-cortexa7hf ?= "${TUNE_FEATURES_tune-armv7ahf} cortexa7"
+TUNE_FEATURES_tune-cortexa7thf ?= "${TUNE_FEATURES_tune-armv7athf} cortexa7"
+TUNE_FEATURES_tune-cortexa7hf-neon ?= "${TUNE_FEATURES_tune-armv7ahf-neon} cortexa7"
+TUNE_FEATURES_tune-cortexa7thf-neon ?= "${TUNE_FEATURES_tune-armv7athf-neon} cortexa7"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf} cortexa7hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} cortexa7hf-vfp cortexa7t2hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon} cortexa7hf-vfp cortexa7hf-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7thf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon} cortexa7hf-vfp cortexa7hf-vfp-neon cortexa7t2hf-vfp cortexa7t2hf-vfp-neon"

conf/machine/include/tune-cortexa8.inc

@@ -0,0 +1,36 @@
+DEFAULTTUNE ?= "armv7a-neon"
+
+require conf/machine/include/arm/arch-armv7a.inc
+
+TUNEVALID[cortexa8] = "Enable Cortex-A8 specific processor optimizations"
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa8", "-mtune=cortex-a8", "", d)}"
+
+# Little Endian base configs
+AVAILTUNES += "cortexa8 cortexa8t cortexa8-neon cortexa8t-neon"
+ARMPKGARCH_tune-cortexa8 = "cortexa8"
+ARMPKGARCH_tune-cortexa8t = "cortexa8"
+ARMPKGARCH_tune-cortexa8-neon = "cortexa8"
+ARMPKGARCH_tune-cortexa8t-neon = "cortexa8"
+TUNE_FEATURES_tune-cortexa8 = "${TUNE_FEATURES_tune-armv7a} cortexa8"
+TUNE_FEATURES_tune-cortexa8t = "${TUNE_FEATURES_tune-armv7at} cortexa8"
+TUNE_FEATURES_tune-cortexa8-neon = "${TUNE_FEATURES_tune-armv7a-neon} cortexa8"
+TUNE_FEATURES_tune-cortexa8t-neon = "${TUNE_FEATURES_tune-armv7at-neon} cortexa8"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a} cortexa8-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} cortexa8-vfp cortexa8t2-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} cortexa8-vfp cortexa8-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8t-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7at-neon} cortexa8-vfp cortexa8-vfp-neon cortexa8t2-vfp cortexa8t2-vfp-neon"
+
+# VFP Tunes
+AVAILTUNES += "cortexa8hf cortexa8thf cortexa8hf-neon cortexa8thf-neon"
+ARMPKGARCH_tune-cortexa8hf = "cortexa8"
+ARMPKGARCH_tune-cortexa8thf = "cortexa8"
+ARMPKGARCH_tune-cortexa8hf-neon = "cortexa8"
+ARMPKGARCH_tune-cortexa8thf-neon = "cortexa8"
+TUNE_FEATURES_tune-cortexa8hf ?= "${TUNE_FEATURES_tune-armv7ahf} cortexa8"
+TUNE_FEATURES_tune-cortexa8thf ?= "${TUNE_FEATURES_tune-armv7athf} cortexa8"
+TUNE_FEATURES_tune-cortexa8hf-neon ?= "${TUNE_FEATURES_tune-armv7ahf-neon} cortexa8"
+TUNE_FEATURES_tune-cortexa8thf-neon ?= "${TUNE_FEATURES_tune-armv7athf-neon} cortexa8"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf} cortexa8hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} cortexa8hf-vfp cortexa8t2hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon} cortexa8hf-vfp cortexa8hf-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8thf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon} cortexa8hf-vfp cortexa8hf-vfp-neon cortexa8t2hf-vfp cortexa8t2hf-vfp-neon"

conf/machine/include/tune-cortexa9.inc

@@ -0,0 +1,36 @@
+DEFAULTTUNE ?= "armv7a-neon"
+
+require conf/machine/include/arm/arch-armv7a.inc
+
+TUNEVALID[cortexa9] = "Enable Cortex-A9 specific processor optimizations"
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa9", "-mtune=cortex-a9", "", d)}"
+
+# Little Endian base configs
+AVAILTUNES += "cortexa9 cortexa9t cortexa9-neon cortexa9t-neon"
+ARMPKGARCH_tune-cortexa9 = "cortexa9"
+ARMPKGARCH_tune-cortexa9t = "cortexa9"
+ARMPKGARCH_tune-cortexa9-neon = "cortexa9"
+ARMPKGARCH_tune-cortexa9t-neon = "cortexa9"
+TUNE_FEATURES_tune-cortexa9 = "${TUNE_FEATURES_tune-armv7a} cortexa9"
+TUNE_FEATURES_tune-cortexa9t = "${TUNE_FEATURES_tune-armv7at} cortexa9"
+TUNE_FEATURES_tune-cortexa9-neon = "${TUNE_FEATURES_tune-armv7a-neon} cortexa9"
+TUNE_FEATURES_tune-cortexa9t-neon = "${TUNE_FEATURES_tune-armv7at-neon} cortexa9"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a} cortexa9-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} cortexa9-vfp cortexa9t2-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} cortexa9-vfp cortexa9-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9t-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7at-neon} cortexa9-vfp cortexa9-vfp-neon cortexa9t2-vfp cortexa9t2-vfp-neon"
+
+# VFP Tunes
+AVAILTUNES += "cortexa9hf cortexa9thf cortexa9hf-neon cortexa9thf-neon"
+ARMPKGARCH_tune-cortexa9hf = "cortexa9"
+ARMPKGARCH_tune-cortexa9thf = "cortexa9"
+ARMPKGARCH_tune-cortexa9hf-neon = "cortexa9"
+ARMPKGARCH_tune-cortexa9thf-neon = "cortexa9"
+TUNE_FEATURES_tune-cortexa9hf ?= "${TUNE_FEATURES_tune-armv7ahf} cortexa9"
+TUNE_FEATURES_tune-cortexa9thf ?= "${TUNE_FEATURES_tune-armv7athf} cortexa9"
+TUNE_FEATURES_tune-cortexa9hf-neon ?= "${TUNE_FEATURES_tune-armv7ahf-neon} cortexa9"
+TUNE_FEATURES_tune-cortexa9thf-neon ?= "${TUNE_FEATURES_tune-armv7athf-neon} cortexa9"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf} cortexa9hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} cortexa9hf-vfp cortexa9t2hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon} cortexa9hf-vfp cortexa9hf-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9thf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon} cortexa9hf-vfp cortexa9hf-vfp-neon cortexa9t2hf-vfp cortexa9t2hf-vfp-neon"

conf/machine/keystone-evm.conf

@@ -0,0 +1,27 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2
+
+require conf/machine/include/keystone.inc
+
+IMAGE_FSTYPES += "ubi tar.gz cpio"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 857 LEBs
+# MKUBIFS_ARGS = "-m 2048 -e 129024 -c 857"
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 857"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              2048
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048"

conf/machine/omap3evm.conf

@@ -0,0 +1,36 @@
+#@TYPE: Machine
+#@NAME: OMAP3 EVM
+#@DESCRIPTION: Machine configuration for the TI OMAP3 EVM
+
+require conf/machine/include/omap3.inc
+
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
+MACHINE_FEATURES += "touchscreen ethernet"
+
+IMAGE_FSTYPES += "jffs2 tar.gz"
+EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+USE_VT = "0"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
+
+EXTRA_IMAGEDEPENDS += "x-load"
+
+# NOTE: there are NAND and OneNAND versions of this board...
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    129024 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1996 LEBs
+MKUBIFS_ARGS = "-m 2048 -e 129024 -c 1996"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512"

conf/machine/omap5-evm.conf

@@ -0,0 +1,36 @@
+#@TYPE: Machine
+#@NAME: OMAP5 EVM
+#@DESCRIPTION: Machine configuration for the TI OMAP5 uEVM
+
+require conf/machine/include/omap-a15.inc
+
+IMAGE_FSTYPES += "ubi tar.gz"
+
+SERIAL_CONSOLE = "115200 ttyO2"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1988 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3836"
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+# UBI: VID header offset:          2048 (aligned 2048)
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
+
+UBOOT_MACHINE = "omap5_uevm_config"
+
+# Currently removing the sgx machine feature because there is no SGX package
+# available for omap5
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"

conf/machine/pandaboard.conf

@@ -0,0 +1,14 @@
+#@TYPE: Machine
+#@NAME: Pandaboard
+#@DESCRIPTION: Machine configuration for the OMAP4430 Panda
+
+require conf/machine/include/omap4.inc
+
+GUI_MACHINE_CLASS = "bigscreen"
+
+IMAGE_FSTYPES += "tar.gz"
+
+SERIAL_CONSOLE = "115200 ttyO2"
+
+MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
+MACHINE_FEATURES = "kernel26 wifi bluetooth alsa apm ext2 screen usbgadget usbhost vfat sgx"

meta-beagle/COPYING.MIT

@@ -1,17 +0,0 @@
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
-THE SOFTWARE.

meta-beagle/README

@@ -1,31 +0,0 @@
-OpenEmbedded/Yocto layer that extends meta-ti-bsp with BeagleBoard.org platforms.
-
-It is hosted on http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/ with the
-source repository at git://git.yoctoproject.org/meta-ti
-
-
-This layer depends on:
-
-URI: git://git.openembedded.org/openembedded-core
-layers: meta
-branch: master
-
-URI: git://git.yoctoproject.org/meta-arm
-layers: meta-arm
-branch: master
-
-URI: git://git.yoctoproject.org/meta-ti
-branch: master
-revision: HEAD
-layers: meta-ti-bsp
-
-
-Send pull requests, patches, comments or questions to:
-meta-ti@lists.yoctoproject.org
-
-Please note - meta-ti mailing list requires subscription for posting:
-https://lists.yoctoproject.org/g/meta-ti
-
-Maintainers:
-Denys Dmytriyenko <denys@konsulko.com>
-Ryan Eatmon <reatmon@ti.com>

meta-beagle/SECURITY

@@ -1,20 +0,0 @@
-How to Report a Potential Vulnerability?
-========================================
-
-If you would like to report a public issue (for example, one with a released
-CVE number), please report it to the mailing list:
-
-  https://lists.yoctoproject.org/g/meta-ti
-
-If you are dealing with a not-yet released or urgent issue, please send a
-message to one of the maintainers listed in the README.  Include as many
-details as possible:
-  - the layer or software module affected
-  - the recipe and its version
-  - any example code, if available
-
-Branches maintained with security fixes
----------------------------------------
-
-See https://wiki.yoctoproject.org/wiki/Releases for the list of current
-releases.  We only accept patches for the LTS releases and the master branch.

meta-beagle/conf/layer.conf

@@ -1,17 +0,0 @@
-# We have a conf and classes directory, append to BBPATH
-BBPATH .= ":${LAYERDIR}"
-
-# We have a recipes directory, add to BBFILES
-BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
-
-BBFILE_COLLECTIONS += "meta-beagle"
-BBFILE_PATTERN_meta-beagle := "^${LAYERDIR}/"
-BBFILE_PRIORITY_meta-beagle = "6"
-
-LAYERSERIES_COMPAT_meta-beagle = "scarthgap"
-
-LAYERDEPENDS_meta-beagle = " \
-    meta-ti-bsp \
-"
-
-HOSTTOOLS_NONFATAL += "lz4c"

meta-beagle/conf/machine/beagle-x15.conf

@@ -1,48 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeagleBoard X15
-#@DESCRIPTION: Machine configuration for the BeagleBoard X15
-
-require conf/machine/include/am57xx.inc
-require conf/machine/include/beagle-bsp.inc
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/omap/am57xx-beagle-x15 \
-    ti/omap/am57xx-idk-lcd \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_6 = " \
-ti/omap/am571x-idk.dtb \
-ti/omap/am571x-idk-touchscreen.dtbo \
-ti/omap/am5729-beagleboneai.dtb \
-ti/omap/am572x-idk.dtb \
-ti/omap/am572x-idk-touchscreen.dtbo \
-ti/omap/am574x-idk.dtb \
-ti/omap/am57xx-beagle-x15.dtb \
-ti/omap/am57xx-beagle-x15-revb1.dtb \
-ti/omap/am57xx-beagle-x15-revc.dtb \
-ti/omap/am57xx-evm.dtbo \
-ti/omap/am57xx-idk-lcd-osd101t2045.dtbo \
-ti/omap/am57xx-idk-lcd-osd101t2587.dtbo \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_12 = " \
-ti/omap/am571x-idk.dtb \
-ti/omap/am571x-idk-touchscreen.dtbo \
-ti/omap/am5729-beagleboneai.dtb \
-ti/omap/am572x-idk.dtb \
-ti/omap/am572x-idk-touchscreen.dtbo \
-ti/omap/am574x-idk.dtb \
-ti/omap/am57xx-beagle-x15.dtb \
-ti/omap/am57xx-beagle-x15-revb1.dtb \
-ti/omap/am57xx-beagle-x15-revc.dtb \
-ti/omap/am57xx-evm.dtbo \
-ti/omap/am57xx-evm-ov10635.dtbo \
-ti/omap/am57xx-idk-lcd-osd101t2045.dtbo \
-ti/omap/am57xx-idk-lcd-osd101t2587.dtbo \
-"
-
-MACHINE_GUI_CLASS = "bigscreen"
-
-SERIAL_CONSOLES = "115200;ttyS2"
-
-UBOOT_MACHINE = "am57xx_evm_config"

meta-beagle/conf/machine/beaglebone-ai64-k3r5.conf

@@ -1,18 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeagleBone AI-64 (R5F)
-#@DESCRIPTION: Machine configuration for the BeagleBone AI-64 (R5F core)
-
-require conf/machine/include/k3r5.inc
-require conf/machine/include/beagle-bsp.inc
-
-SYSFW_SOC = "j721e"
-SYSFW_CONFIG = "evm"
-SYSFW_SUFFIX = "gp"
-
-SPL_BINARY = "spl/u-boot-spl.${UBOOT_SUFFIX}"
-SPL_SYMLINK = "u-boot-r5spl.${UBOOT_SUFFIX}"
-UBOOT_BINARY = "tiboot3.${UBOOT_SUFFIX}"
-UBOOT_IMAGE = "tiboot3-${MAINMACHINE}-${PV}-${PR}.${UBOOT_SUFFIX}"
-UBOOT_SYMLINK = "tiboot3-${MAINMACHINE}.${UBOOT_SUFFIX}"
-
-UBOOT_MACHINE = "j721e_beagleboneai64_r5_defconfig"

meta-beagle/conf/machine/beaglebone-ai64.conf

@@ -1,95 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeagleBone AI-64 (A72)
-#@DESCRIPTION: Machine configuration for the BeagleBone AI-64 board (A72 core)
-
-require conf/machine/include/j721e.inc
-require conf/machine/include/beagle-bsp.inc
-
-UBOOT_MACHINE = "j721e_beagleboneai64_a72_defconfig"
-
-SPL_BINARY = "tispl.bin_unsigned"
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-j721e \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_6 = " \
-ti/k3-j721e-beagleboneai64-BBORG_MOTOR.dtbo \
-ti/k3-j721e-beagleboneai64-dsi-rpi-7inch-panel.dtbo \
-ti/k3-j721e-beagleboneai64.dtb \
-ti/k3-j721e-beagleboneai64-microtips-mf070zima-lcd3.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm0-p8_13.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm0-p8_13-p8_19.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm0-p8_19.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm2-p9_14.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm2-p9_14-p9_16.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm2-p9_16.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm4-p9_25.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi1-cs0.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi1-cs0-no-miso.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi2-cs0.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi3-cs0-no-miso.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi6-cs0-cs1.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi6-cs0.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi6-cs1-no-miso.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi7-cs0.dtbo \
-ti/k3-j721e-common-proc-board.dtb \
-ti/k3-j721e-common-proc-board-infotainment.dtbo \
-ti/k3-j721e-evm-csi2-ov5640.dtbo \
-ti/k3-j721e-evm-ethfw.dtbo \
-ti/k3-j721e-evm-fusion.dtbo \
-ti/k3-j721e-evm-gesi-exp-board.dtbo \
-ti/k3-j721e-evm-ina2xx.dtbo \
-ti/k3-j721e-evm-pcie0-ep.dtbo \
-ti/k3-j721e-evm-pcie1-ep.dtbo \
-ti/k3-j721e-evm-quad-port-eth-exp.dtbo \
-ti/k3-j721e-sk-csi2-dual-imx219.dtbo \
-ti/k3-j721e-sk-csi2-ov5640.dtbo \
-ti/k3-j721e-sk.dtb \
-ti/k3-j721e-sk-fpdlink-fusion.dtbo \
-ti/k3-j721e-sk-rpi-hdr-ehrpwm.dtbo \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_12 = " \
-ti/k3-j721e-beagleboneai64-BBORG_MOTOR.dtbo \
-ti/k3-j721e-beagleboneai64-dsi-rpi-7inch-panel.dtbo \
-ti/k3-j721e-beagleboneai64.dtb \
-ti/k3-j721e-beagleboneai64-microtips-mf070zima-lcd3.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm0-p8_13.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm0-p8_13-p8_19.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm0-p8_19.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm2-p9_14.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm2-p9_14-p9_16.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm2-p9_16.dtbo \
-ti/k3-j721e-beagleboneai64-pwm-epwm4-p9_25.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi1-cs0.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi1-cs0-no-miso.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi2-cs0.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi3-cs0-no-miso.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi6-cs0-cs1.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi6-cs0.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi6-cs1-no-miso.dtbo \
-ti/k3-j721e-beagleboneai64-spi-mcspi7-cs0.dtbo \
-ti/k3-j721e-common-proc-board.dtb \
-ti/k3-j721e-common-proc-board-infotainment.dtbo \
-ti/k3-j721e-evm-csi2-ov5640.dtbo \
-ti/k3-j721e-evm-ethfw.dtbo \
-ti/k3-j721e-evm-fusion.dtbo \
-ti/k3-j721e-evm-gesi-exp-board.dtbo \
-ti/k3-j721e-evm-pcie0-ep.dtbo \
-ti/k3-j721e-evm-pcie1-ep.dtbo \
-ti/k3-j721e-evm-pcie-ntb.dtbo \
-ti/k3-j721e-evm-quad-port-eth-exp.dtbo \
-ti/k3-j721e-evm-ub954.dtbo \
-ti/k3-j721e-sk-csi2-dual-imx219.dtbo \
-ti/k3-j721e-sk-csi2-ov5640.dtbo \
-ti/k3-j721e-sk.dtb \
-ti/k3-j721e-sk-fpdlink-fusion.dtbo \
-"
-
-MACHINE_GUI_CLASS = "bigscreen"
-
-# TI has moved a driver out of its kernel tree and into an out of tree module.
-# We need to not include that for older kernels since the module is still in
-# the kernel.
-TI_VXE_VXD_DRIVER:bsp-bb_org-6_6 = ""

meta-beagle/conf/machine/beaglebone.conf

@@ -1,62 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeagleBone machine
-#@DESCRIPTION: Machine configuration for the http://beagleboard.org/bone board
-
-require conf/machine/include/ti33x.inc
-require conf/machine/include/beagle-bsp.inc
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/omap/am335x-bone \
-    ti/omap/am335x-pocketbeagle \
-    ti/omap/am335x-sancloud-bbe \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_6 = " \
-ti/omap/am335x-boneblack.dtb \
-ti/omap/am335x-boneblack-revd.dtb \
-ti/omap/am335x-boneblack-uboot.dtb \
-ti/omap/am335x-boneblack-uboot-univ.dtb \
-ti/omap/am335x-boneblack-wireless.dtb \
-ti/omap/am335x-boneblue.dtb \
-ti/omap/am335x-bone.dtb \
-ti/omap/am335x-bonegreen.dtb \
-ti/omap/am335x-bonegreen-gateway.dtb \
-ti/omap/am335x-bonegreen-wireless.dtb \
-ti/omap/am335x-bonegreen-wireless-uboot-univ.dtb \
-ti/omap/am335x-evm.dtb \
-ti/omap/am335x-evmsk.dtb \
-ti/omap/am335x-icev2.dtb \
-ti/omap/am335x-osd3358-sm-red.dtb \
-ti/omap/am335x-pocketbeagle.dtb \
-ti/omap/am335x-sancloud-bbe.dtb \
-ti/omap/am335x-sancloud-bbe-extended-wifi.dtb \
-ti/omap/am335x-sancloud-bbe-lite.dtb \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_12 = " \
-ti/omap/am335x-boneblack.dtb \
-ti/omap/am335x-boneblack-revd.dtb \
-ti/omap/am335x-boneblack-uboot.dtb \
-ti/omap/am335x-boneblack-uboot-univ.dtb \
-ti/omap/am335x-boneblack-wireless.dtb \
-ti/omap/am335x-boneblue.dtb \
-ti/omap/am335x-bone.dtb \
-ti/omap/am335x-bonegreen.dtb \
-ti/omap/am335x-bonegreen-eco.dtb \
-ti/omap/am335x-bonegreen-gateway.dtb \
-ti/omap/am335x-bonegreen-wireless.dtb \
-ti/omap/am335x-bonegreen-wireless-uboot-univ.dtb \
-ti/omap/am335x-evm.dtb \
-ti/omap/am335x-evmsk.dtb \
-ti/omap/am335x-icev2.dtb \
-ti/omap/am335x-osd3358-sm-red.dtb \
-ti/omap/am335x-pocketbeagle.dtb \
-ti/omap/am335x-sancloud-bbe.dtb \
-ti/omap/am335x-sancloud-bbe-extended-wifi.dtb \
-ti/omap/am335x-sancloud-bbe-lite.dtb \
-"
-
-MACHINE_GUI_CLASS = "bigscreen"
-MACHINE_FEATURES += "screen"
-
-SERIAL_CONSOLES = "115200;ttyS0"

meta-beagle/conf/machine/beagleplay-k3r5.conf

@@ -1,7 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeaglePlay (R5F)
-#@DESCRIPTION: Machine configuration for the BeaglePlay (R5F core)
-
-require conf/machine/beagleplay-ti-k3r5.conf
-
-require conf/machine/include/beagle-bsp.inc

meta-beagle/conf/machine/beagleplay.conf

@@ -1,62 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeaglePlay (A53)
-#@DESCRIPTION: Machine configuration for the BeaglePlay board (A53 core)
-
-require conf/machine/beagleplay-ti.conf
-
-require conf/machine/include/beagle-bsp.inc
-
-KERNEL_DEVICETREE:bsp-bb_org-6_6 = " \
-ti/k3-am625-beagleplay-csi2-ov5640.dtbo \
-ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtbo \
-ti/k3-am625-beagleplay.dtb \
-ti/k3-am625-beagleplay-lincolntech-lcd185-panel.dtbo \
-ti/k3-am625-minimal.dtb \
-ti/k3-am625-sk.dtb \
-ti/k3-am625-sk-ecap-capture.dtbo \
-ti/k3-am625-sk-lincolntech-lcd185-panel.dtbo \
-ti/k3-am625-sk-m2-cc3301.dtbo \
-ti/k3-am625-sk-mcspi-loopback.dtbo \
-ti/k3-am625-sk-microtips-mf101hie-panel.dtbo \
-ti/k3-am625-sk-rpi-hdr-ehrpwm.dtbo \
-ti/k3-am62x-sk-csi2-imx219.dtbo \
-ti/k3-am62x-sk-csi2-ov5640.dtbo \
-ti/k3-am62x-sk-csi2-tevi-ov5640.dtbo \
-ti/k3-am62x-sk-csi2-v3link-fusion.dtbo \
-ti/k3-am62x-sk-dmtimer-pwm.dtbo \
-ti/k3-am62x-sk-eqep.dtbo \
-ti/k3-am62x-sk-fastboot-disable-hdmi.dtbo \
-ti/k3-am62x-sk-hdmi-audio.dtbo \
-ti/k3-am62x-sk-lpm-wkup-sources.dtbo \
-ti/k3-am62x-sk-mcan.dtbo \
-ti/k3-am62x-sk-microtips-mf103hie-lcd2.dtbo \
-ti/k3-am62x-sk-pwm.dtbo \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_12 = " \
-ti/k3-am625-beagleplay-bcfserial-no-firmware.dtbo \
-ti/k3-am625-beagleplay-csi2-ov5640.dtbo \
-ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtbo \
-ti/k3-am625-beagleplay.dtb \
-ti/k3-am625-beagleplay-lincolntech-lcd185-panel.dtbo \
-ti/k3-am625-sk.dtb \
-ti/k3-am625-sk-lincolntech-lcd185-panel.dtbo \
-ti/k3-am625-sk-m2-cc3351.dtbo \
-ti/k3-am625-sk-mcspi-loopback.dtbo \
-ti/k3-am625-sk-microtips-mf101hie-panel.dtbo \
-ti/k3-am625-sk-rpi-hdr-ehrpwm.dtbo \
-ti/k3-am62x-sk-csi2-imx219.dtbo \
-ti/k3-am62x-sk-csi2-ov5640.dtbo \
-ti/k3-am62x-sk-csi2-tevi-ov5640.dtbo \
-ti/k3-am62x-sk-csi2-v3link-fusion.dtbo \
-ti/k3-am62x-sk-dmtimer-pwm.dtbo \
-ti/k3-am62x-sk-ecap-capture.dtbo \
-ti/k3-am62x-sk-eqep.dtbo \
-ti/k3-am62x-sk-fastboot-disable-hdmi.dtbo \
-ti/k3-am62x-sk-hdmi-audio.dtbo \
-ti/k3-am62x-sk-lpm-io-ddr-wkup-sources.dtbo \
-ti/k3-am62x-sk-lpm-wkup-sources.dtbo \
-ti/k3-am62x-sk-mcan.dtbo \
-ti/k3-am62x-sk-microtips-mf103hie-lcd2.dtbo \
-ti/k3-am62x-sk-pwm.dtbo \
-"

meta-beagle/conf/machine/beagley-ai-k3r5.conf

@@ -1,13 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeagleY AI (R5F)
-#@DESCRIPTION: Machine configuration for the BeagleY AI (R5F core)
-
-require conf/machine/include/k3r5.inc
-require conf/machine/include/beagle-bsp.inc
-
-SYSFW_SOC = "j722s"
-SYSFW_CONFIG = "evm"
-SYSFW_SUFFIX = "hs-fs"
-
-UBOOT_MACHINE = "j722s_evm_r5_defconfig"
-UBOOT_MACHINE:bsp-bb_org-6_12 = "am67a_beagley_ai_r5_defconfig"

meta-beagle/conf/machine/beagley-ai.conf

@@ -1,107 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeagleY AI (A53)
-#@DESCRIPTION: Machine configuration for the BeagleY AI board (A53 core)
-
-require conf/machine/include/j722s.inc
-require conf/machine/include/beagle-bsp.inc
-
-UBOOT_MACHINE:bsp-bb_org-6_6 = "j722s_evm_a53_config"
-
-UBOOT_MACHINE = "am67a_beagley_ai_a53_defconfig"
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-am67a \
-    ti/k3-j722s \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_6 = " \
-ti/k3-am67a-beagley-ai.dtb \
-ti/k3-am67a-beagley-ai-i2c1-400000.dtbo \
-ti/k3-am67a-beagley-ai-i2c1-ads1115.dtbo \
-ti/k3-am67a-beagley-ai-i2c1-rtc-rv3028.dtbo \
-ti/k3-am67a-beagley-ai-i2c1-ssd1306.dtbo \
-ti/k3-am67a-beagley-ai-mikroe-eth.dtbo \
-ti/k3-am67a-beagley-ai-mikroe-microsd.dtbo \
-ti/k3-am67a-beagley-ai-pps-gpio18.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap0-gpio12.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap1-gpio16.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap1-gpio21.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap2-gpio17.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap2-gpio18.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio12.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio14.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio15.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio15-gpio12.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio15-gpio14.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio5.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio5-gpio12.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio5-gpio14.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio13.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio20.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio21.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio21-gpio13.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio21-gpio20.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio6.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio6-gpio13.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio6-gpio20.dtbo \
-ti/k3-am67a-beagley-ai-spi0-1cs.dtbo \
-ti/k3-am67a-beagley-ai-spi0-2cs.dtbo \
-ti/k3-am67a-beagley-ai-spidev0.dtbo \
-ti/k3-am67a-beagley-ai-uart-ttyama0.dtbo \
-ti/k3-j722s-evm-csi2-ov5640.dtbo \
-ti/k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo \
-ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtbo \
-ti/k3-j722s-evm-dsi-rpi-7inch-panel.dtbo \
-ti/k3-j722s-evm.dtb \
-ti/k3-j722s-evm-fpdlink-fusion.dtbo \
-ti/k3-j722s-evm-microtips-mf101hie-panel.dtbo \
-ti/k3-j722s-evm-pwm.dtbo \
-ti/k3-j722s-evm-v3link-fusion.dtbo \
-"
-
-KERNEL_DEVICETREE:bsp-bb_org-6_12 = " \
-ti/k3-am67a-beagley-ai.dtb \
-ti/k3-am67a-beagley-ai-i2c1-400000.dtbo \
-ti/k3-am67a-beagley-ai-i2c1-ads1115.dtbo \
-ti/k3-am67a-beagley-ai-i2c1-rtc-rv3028.dtbo \
-ti/k3-am67a-beagley-ai-i2c1-ssd1306.dtbo \
-ti/k3-am67a-beagley-ai-mikroe-eth.dtbo \
-ti/k3-am67a-beagley-ai-mikroe-microsd.dtbo \
-ti/k3-am67a-beagley-ai-pps-gpio18.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap0-gpio12.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap1-gpio16.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap1-gpio21.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap2-gpio17.dtbo \
-ti/k3-am67a-beagley-ai-pwm-ecap2-gpio18.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio12.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio14.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio15.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio15-gpio12.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio15-gpio14.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio5.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio5-gpio12.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm0-gpio5-gpio14.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio13.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio20.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio21.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio21-gpio13.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio21-gpio20.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio6.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio6-gpio13.dtbo \
-ti/k3-am67a-beagley-ai-pwm-epwm1-gpio6-gpio20.dtbo \
-ti/k3-am67a-beagley-ai-spi0-1cs.dtbo \
-ti/k3-am67a-beagley-ai-spi0-2cs.dtbo \
-ti/k3-am67a-beagley-ai-spidev0.dtbo \
-ti/k3-am67a-beagley-ai-uart-ttyama0.dtbo \
-ti/k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo \
-ti/k3-j722s-evm-csi2-quad-tevi-ov5640.dtbo \
-ti/k3-j722s-evm-dsi-rpi-7inch-panel.dtbo \
-ti/k3-j722s-evm.dtb \
-ti/k3-j722s-evm-fpdlink-fusion.dtbo \
-ti/k3-j722s-evm-fpdlink-iv-fusion.dtbo \
-ti/k3-j722s-evm-microtips-mf101hie-panel.dtbo \
-ti/k3-j722s-evm-pwm.dtbo \
-ti/k3-j722s-evm-v3link-fusion.dtbo \
-"
-
-MACHINE_GUI_CLASS = "bigscreen"

meta-beagle/conf/machine/include/beagle-bsp.inc

@@ -1,47 +0,0 @@
-# Use meta-ti-bsp "multi-BSP" facility to create a custom "bb_org" BSP profile
-# with default preferences for Beagle platforms
-
-# Default is bb_org-6_12, but can override with any of the existing options
-TI_PREFERRED_BSP ?= "bb_org-6_12"
-
-# ===========
-# bb_org-6_12
-# BeagleBoard.org kernel 6.12, u-boot 2025.04
-# based on TI staging trees with extra Beagle-specific features
-# but may not be up-to-date with TI version
-# ===========
-BSP_KERNEL_PROVIDER:bsp-bb_org-6_12 = "linux-bb.org"
-BSP_KERNEL_VERSION:bsp-bb_org-6_12 = "6.12.%"
-BSP_BOOTLOADER_PROVIDER:bsp-bb_org-6_12 = "u-boot-bb.org"
-BSP_BOOTLOADER_VERSION:bsp-bb_org-6_12 = "2025.%"
-KERNEL_DEVICETREE_PREFIX:bsp-bb_org-6_12 = ""
-
-BSP_SGX_DRIVER_PROVIDER:bsp-bb_org-6_12 = "ti-sgx-ddk-km"
-BSP_SGX_DRIVER_VERSION:bsp-bb_org-6_12 = "1.17%"
-BSP_ROGUE_DRIVER_PROVIDER:bsp-bb_org-6_12 = "ti-img-rogue-driver"
-BSP_ROGUE_DRIVER_VERSION:bsp-bb_org-6_12 = "24%"
-BSP_MESA_PVR_VERSION:bsp-bb_org-6_12 = "24%"
-
-# GC320 support requires out-of-tree drivers not yet available in bb.org 6.12
-MACHINE_FEATURES:remove:bsp-bb_org-6_12 = "gc320"
-
-# ==========
-# bb_org-6_6
-# BeagleBoard.org kernel 6.6, u-boot 2024.10
-# based on TI staging trees with extra Beagle-specific features
-# but may not be up-to-date with TI version
-# ==========
-BSP_KERNEL_PROVIDER:bsp-bb_org-6_6 = "linux-bb.org"
-BSP_KERNEL_VERSION:bsp-bb_org-6_6 = "6.6.%"
-BSP_BOOTLOADER_PROVIDER:bsp-bb_org-6_6 = "u-boot-bb.org"
-BSP_BOOTLOADER_VERSION:bsp-bb_org-6_6 = "2024.%"
-KERNEL_DEVICETREE_PREFIX:bsp-bb_org-6_6 = ""
-
-BSP_SGX_DRIVER_PROVIDER:bsp-bb_org-6_6 = "ti-sgx-ddk-km"
-BSP_SGX_DRIVER_VERSION:bsp-bb_org-6_6 = "1.17%"
-BSP_ROGUE_DRIVER_PROVIDER:bsp-bb_org-6_6 = "ti-img-rogue-driver"
-BSP_ROGUE_DRIVER_VERSION:bsp-bb_org-6_6 = "24%"
-BSP_MESA_PVR_VERSION:bsp-bb_org-6_6 = "24%"
-
-# GC320 support requires out-of-tree drivers not yet available in bb.org 6.6
-MACHINE_FEATURES:remove:bsp-bb_org-6_6 = "gc320"

meta-beagle/conf/machine/pocketbeagle2-k3r5.conf

@@ -1,12 +0,0 @@
-#@TYPE: Machine
-#@NAME: PocketBeagle2 (R5F)
-#@DESCRIPTION: Machine configuration for the PocketBeagle2 (R5F core)
-
-require conf/machine/include/k3r5.inc
-require conf/machine/include/beagle-bsp.inc
-
-SYSFW_SOC = "am62x"
-SYSFW_CONFIG = "evm"
-SYSFW_SUFFIX = "hs-fs"
-
-UBOOT_MACHINE = "am6232_pocketbeagle2_r5_defconfig"

meta-beagle/conf/machine/pocketbeagle2.conf

@@ -1,58 +0,0 @@
-#@TYPE: Machine
-#@NAME: PocketBeagle2 (A53)
-#@DESCRIPTION: Machine configuration for the PocketBeagle2 board (A53 core)
-
-require conf/machine/include/k3.inc
-require conf/machine/include/mc_k3r5.inc
-
-require conf/machine/include/beagle-bsp.inc
-
-SOC_FAMILY:append = ":am62xx"
-
-SERIAL_CONSOLES = "115200;ttyS2"
-
-TFA_BOARD = "lite"
-TFA_K3_SYSTEM_SUSPEND = "1"
-
-OPTEEMACHINE = "k3-am62x"
-
-UBOOT_MACHINE = "am6232_pocketbeagle2_a53_defconfig"
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-am6232 \
-    ti/k3-am62-pocket \
-"
-
-KERNEL_DEVICETREE = " \
-ti/k3-am6232-pocketbeagle2.dtb \
-ti/k3-am6232-pocketbeagle2-techlab-cape.dtbo \
-ti/k3-am625-beagleplay-bcfserial-no-firmware.dtbo \
-ti/k3-am625-beagleplay-csi2-ov5640.dtbo \
-ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtbo \
-ti/k3-am625-beagleplay.dtb \
-ti/k3-am625-beagleplay-lincolntech-lcd185-panel.dtbo \
-ti/k3-am625-sk.dtb \
-ti/k3-am625-sk-lincolntech-lcd185-panel.dtbo \
-ti/k3-am625-sk-m2-cc3351.dtbo \
-ti/k3-am625-sk-mcspi-loopback.dtbo \
-ti/k3-am625-sk-microtips-mf101hie-panel.dtbo \
-ti/k3-am625-sk-rpi-hdr-ehrpwm.dtbo \
-ti/k3-am62-pocketbeagle2-ardupilot-cape.dtbo \
-ti/k3-am62-pocketbeagle2.dtb \
-ti/k3-am62-pocketbeagle2-leds-off.dtbo \
-ti/k3-am62-pocketbeagle2-techlab-cape.dtbo \
-ti/k3-am62x-sk-csi2-imx219.dtbo \
-ti/k3-am62x-sk-csi2-ov5640.dtbo \
-ti/k3-am62x-sk-csi2-tevi-ov5640.dtbo \
-ti/k3-am62x-sk-csi2-v3link-fusion.dtbo \
-ti/k3-am62x-sk-dmtimer-pwm.dtbo \
-ti/k3-am62x-sk-ecap-capture.dtbo \
-ti/k3-am62x-sk-eqep.dtbo \
-ti/k3-am62x-sk-fastboot-disable-hdmi.dtbo \
-ti/k3-am62x-sk-hdmi-audio.dtbo \
-ti/k3-am62x-sk-lpm-io-ddr-wkup-sources.dtbo \
-ti/k3-am62x-sk-lpm-wkup-sources.dtbo \
-ti/k3-am62x-sk-mcan.dtbo \
-ti/k3-am62x-sk-microtips-mf103hie-lcd2.dtbo \
-ti/k3-am62x-sk-pwm.dtbo \
-"

meta-beagle/recipes-bsp/u-boot/u-boot-bb.org-2025.07+git/bootcmd-ti-mmc.cfg

@@ -1 +0,0 @@
-CONFIG_BOOTCOMMAND="run bootcmd_ti_mmc"

meta-beagle/recipes-bsp/u-boot/u-boot-bb.org_2024.10.bb

@@ -1,12 +0,0 @@
-require recipes-bsp/u-boot/u-boot-ti.inc
-
-SUMMARY = "BeagleBoard.org U-Boot"
-
-COMPATIBLE_MACHINE = "beagle.*"
-
-PV = "2024.10"
-
-UBOOT_GIT_URI = "git://github.com/beagleboard/u-boot.git"
-UBOOT_GIT_PROTOCOL = "https"
-BRANCH = "v2024.10-Beagle"
-SRCREV = "bf0e9d0b7274d2b561bd24c858affec2038250f9"

meta-beagle/recipes-bsp/u-boot/u-boot-bb.org_2025.07.bb

@@ -1,19 +0,0 @@
-require recipes-bsp/u-boot/u-boot-ti.inc
-
-SUMMARY = "BeagleBoard.org U-Boot"
-
-COMPATIBLE_MACHINE = "pocketbeagle2|beagle.*"
-
-PV = "2025.07"
-
-UBOOT_GIT_URI = "git://github.com/beagleboard/u-boot.git"
-UBOOT_GIT_PROTOCOL = "https"
-BRANCH = "v2025.07-Beagle"
-SRCREV = "919ec3cd84f39e6960d1705d4ba7f810bc1067fc"
-
-BRANCH:pocketbeagle2 = "v2025.07-am6232-pocketbeagle2"
-BRANCH:pocketbeagle2-k3r5 = "v2025.07-am6232-pocketbeagle2"
-SRCREV:pocketbeagle2 = "6d5b4abc28f036a4a83ccb234f04d72eceafdc4e"
-SRCREV:pocketbeagle2-k3r5 = "6d5b4abc28f036a4a83ccb234f04d72eceafdc4e"
-
-SRC_URI:append:pocketbeagle2 = " file://bootcmd-ti-mmc.cfg"

meta-beagle/recipes-kernel/linux/linux-bb.org-6.12/defconfig

@@ -1 +0,0 @@
-use-kernel-config=bb.org_defconfig

meta-beagle/recipes-kernel/linux/linux-bb.org-6.6/defconfig

@@ -1 +0,0 @@
-use-kernel-config=bb.org_defconfig

meta-beagle/recipes-kernel/linux/linux-bb.org-6.6/no-fortify.cfg

@@ -1 +0,0 @@
-CONFIG_FORTIFY_SOURCE=n

meta-beagle/recipes-kernel/linux/linux-bb.org_6.12.bb

@@ -1,73 +0,0 @@
-# Look in the generic major.minor directory for files
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}-6.12:"
-
-SECTION = "kernel"
-SUMMARY = "BeagleBoard.org Linux kernel"
-LICENSE = "GPL-2.0-only"
-LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
-
-COMPATIBLE_MACHINE = "pocketbeagle2|beagle.*"
-
-inherit kernel
-
-require recipes-kernel/linux/setup-defconfig.inc
-require recipes-kernel/linux/ti-kernel.inc
-
-DEPENDS += "gmp-native libmpc-native"
-
-KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT} ${EXTRA_DTC_ARGS}"
-
-# Extra DT overlays/capes
-KERNEL_DEVICETREE:append:armv7a = " \
-    ti/omap/BB-ADC-00A0.dtbo \
-    ti/omap/BB-BBBW-WL1835-00A0.dtbo \
-    ti/omap/BB-BBGG-WL1835-00A0.dtbo \
-    ti/omap/BB-BBGW-WL1835-00A0.dtbo \
-    ti/omap/BB-BONE-4D5R-01-00A1.dtbo \
-    ti/omap/BB-BONE-eMMC1-01-00A0.dtbo \
-    ti/omap/BB-BONE-LCD4-01-00A1.dtbo \
-    ti/omap/BB-BONE-NH7C-01-A0.dtbo \
-    ti/omap/BB-CAPE-DISP-CT4-00A0.dtbo \
-    ti/omap/BB-HDMI-TDA998x-00A0.dtbo \
-    ti/omap/BB-I2C1-MCP7940X-00A0.dtbo \
-    ti/omap/BB-I2C1-RTC-DS3231.dtbo \
-    ti/omap/BB-I2C1-RTC-PCF8563.dtbo \
-    ti/omap/BB-I2C2-BME680.dtbo \
-    ti/omap/BB-I2C2-MPU6050.dtbo \
-    ti/omap/BB-LCD-ADAFRUIT-24-SPI1-00A0.dtbo \
-    ti/omap/BB-NHDMI-TDA998x-00A0.dtbo \
-    ti/omap/BBORG_COMMS-00A2.dtbo \
-    ti/omap/BBORG_FAN-A000.dtbo \
-    ti/omap/BBORG_RELAY-00A2.dtbo \
-    ti/omap/BB-SPIDEV0-00A0.dtbo \
-    ti/omap/BB-SPIDEV1-00A0.dtbo \
-    ti/omap/BB-UART1-00A0.dtbo \
-    ti/omap/BB-UART2-00A0.dtbo \
-    ti/omap/BB-UART4-00A0.dtbo \
-    ti/omap/BB-W1-P9.12-00A0.dtbo \
-    ti/omap/BONE-ADC.dtbo \
-    ti/omap/M-BB-BBG-00A0.dtbo \
-    ti/omap/M-BB-BBGG-00A0.dtbo \
-    ti/omap/PB-MIKROBUS-0.dtbo \
-    ti/omap/PB-MIKROBUS-1.dtbo \
-"
-
-KERNEL_DEVICETREE:append:aarch64 = " \
-    ti/BONE-I2C1.dtbo \
-    ti/BONE-I2C2.dtbo \
-    ti/BONE-I2C3.dtbo \
-"
-
-S = "${WORKDIR}/git"
-
-# 6.12.34 version for 32-bit
-SRCREV:armv7a = "9e419b26243bd7efcd103ae0f6456f828592b34b"
-PV:armv7a = "6.12.34+git"
-BRANCH:armv7a = "v6.12.34-ti-arm32-r12"
-
-# 6.12.34 version for 64-bit
-SRCREV:aarch64 = "9ca36b8c54806a037f357efcd40eaa8399798b05"
-PV:aarch64 = "6.12.34+git"
-BRANCH:aarch64 = "v6.12.34-ti-arm64-r46"
-
-KERNEL_GIT_URI = "git://github.com/beagleboard/linux.git"

meta-beagle/recipes-kernel/linux/linux-bb.org_6.6.bb

@@ -1,71 +0,0 @@
-# Look in the generic major.minor directory for files
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}-6.6:"
-
-SECTION = "kernel"
-SUMMARY = "BeagleBoard.org Linux kernel"
-LICENSE = "GPL-2.0-only"
-LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
-
-COMPATIBLE_MACHINE = "beagle.*"
-
-inherit kernel
-
-require recipes-kernel/linux/setup-defconfig.inc
-require recipes-kernel/linux/ti-kernel.inc
-
-DEPENDS += "gmp-native libmpc-native"
-
-KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT} ${EXTRA_DTC_ARGS}"
-
-# Extra DT overlays/capes
-KERNEL_DEVICETREE:append:armv7a = " \
-    ti/omap/AM335X-PRU-UIO-00A0.dtbo \
-    ti/omap/BB-ADC-00A0.dtbo \
-    ti/omap/BB-BBBW-WL1835-00A0.dtbo \
-    ti/omap/BB-BBGG-WL1835-00A0.dtbo \
-    ti/omap/BB-BBGW-WL1835-00A0.dtbo \
-    ti/omap/BB-BONE-4D5R-01-00A1.dtbo \
-    ti/omap/BB-BONE-eMMC1-01-00A0.dtbo \
-    ti/omap/BB-BONE-LCD4-01-00A1.dtbo \
-    ti/omap/BB-BONE-NH7C-01-A0.dtbo \
-    ti/omap/BB-CAPE-DISP-CT4-00A0.dtbo \
-    ti/omap/BB-HDMI-TDA998x-00A0.dtbo \
-    ti/omap/BB-I2C1-MCP7940X-00A0.dtbo \
-    ti/omap/BB-I2C1-RTC-DS3231.dtbo \
-    ti/omap/BB-I2C1-RTC-PCF8563.dtbo \
-    ti/omap/BB-I2C2-BME680.dtbo \
-    ti/omap/BB-I2C2-MPU6050.dtbo \
-    ti/omap/BB-LCD-ADAFRUIT-24-SPI1-00A0.dtbo \
-    ti/omap/BB-NHDMI-TDA998x-00A0.dtbo \
-    ti/omap/BBORG_COMMS-00A2.dtbo \
-    ti/omap/BBORG_FAN-A000.dtbo \
-    ti/omap/BBORG_RELAY-00A2.dtbo \
-    ti/omap/BB-SPIDEV0-00A0.dtbo \
-    ti/omap/BB-SPIDEV1-00A0.dtbo \
-    ti/omap/BB-UART1-00A0.dtbo \
-    ti/omap/BB-UART2-00A0.dtbo \
-    ti/omap/BB-UART4-00A0.dtbo \
-    ti/omap/BB-W1-P9.12-00A0.dtbo \
-    ti/omap/BONE-ADC.dtbo \
-    ti/omap/M-BB-BBG-00A0.dtbo \
-    ti/omap/M-BB-BBGG-00A0.dtbo \
-    ti/omap/PB-MIKROBUS-0.dtbo \
-    ti/omap/PB-MIKROBUS-1.dtbo \
-"
-
-S = "${WORKDIR}/git"
-
-# 6.6.58 version for 32-bit
-SRCREV:armv7a = "3d519995234675748a38b1e3bc087baa03e3ac25"
-PV:armv7a = "6.6.58+git"
-BRANCH:armv7a = "v6.6.58-ti-arm32-r12"
-
-# 6.6.58 version for 64-bit
-SRCREV:aarch64 = "1de9481cd5749807550148086aea959295bd11db"
-PV:aarch64 = "6.6.58+git"
-BRANCH:aarch64 = "v6.6.58-ti-arm64-r30"
-
-KERNEL_GIT_URI = "git://github.com/beagleboard/linux.git"
-
-SRC_URI += "file://no-fortify.cfg"
-KERNEL_CONFIG_FRAGMENTS += "${WORKDIR}/no-fortify.cfg"

meta-ti-bsp/COPYING.MIT

@@ -1,17 +0,0 @@
-Permission is hereby granted, free of charge, to any person obtaining a copy 
-of this software and associated documentation files (the "Software"), to deal 
-in the Software without restriction, including without limitation the rights 
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 
-copies of the Software, and to permit persons to whom the Software is 
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in 
-all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE 
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 
-THE SOFTWARE.

meta-ti-bsp/README

@@ -1,33 +0,0 @@
-The official OpenEmbedded/Yocto BSP layer for Texas Instruments platforms.
-
-It is hosted on http://git.yoctoproject.org/cgit/cgit.cgi/meta-ti/ with the
-source repository at git://git.yoctoproject.org/meta-ti
-
-
-This layer depends on:
-
-URI: git://git.openembedded.org/openembedded-core
-layers: meta
-branch: scarthgap
-
-URI: git://git.yoctoproject.org/meta-arm
-layers: meta-arm
-branch: scarthgap
-
-
-The base BSP part of meta-ti should work with different OpenEmbedded/Yocto
-distributions and layer stacks, such as:
-distro-less (only with OE-Core), with Yocto/Poky, with Angstrom or Arago.
-
-Please follow the recommended setup procedures of your OE distribution.
-
-
-Send pull requests, patches, comments or questions to:
-meta-ti@lists.yoctoproject.org
-
-Please note - meta-ti mailing list requires subscription for posting:
-https://lists.yoctoproject.org/g/meta-ti
-
-Maintainers:
-Ryan Eatmon <reatmon@ti.com>
-Denys Dmytriyenko <denys@konsulko.com>

meta-ti-bsp/SECURITY

@@ -1,20 +0,0 @@
-How to Report a Potential Vulnerability?
-========================================
-
-If you would like to report a public issue (for example, one with a released
-CVE number), please report it to the mailing list:
-
-  https://lists.yoctoproject.org/g/meta-ti
-
-If you are dealing with a not-yet released or urgent issue, please send a
-message to one of the maintainers listed in the README.  Include as many
-details as possible:
-  - the layer or software module affected
-  - the recipe and its version
-  - any example code, if available
-
-Branches maintained with security fixes
----------------------------------------
-
-See https://wiki.yoctoproject.org/wiki/Releases for the list of current
-releases.  We only accept patches for the LTS releases and the master branch.

meta-ti-bsp/classes/kernel-fitimage-legacyhs.bbclass

@@ -1,767 +0,0 @@
-inherit ti-secdev kernel-uboot uboot-sign-legacyhs
-
-FITIMAGE_HASH_ALGO ?= "sha1"
-FITIMAGE_PACK_TEE ?= "0"
-FITIMAGE_DTB_BY_NAME ?= "0"
-FITIMAGE_TEE_BY_NAME ?= "0"
-FITIMAGE_CONF_BY_NAME ?= "0"
-
-python __anonymous () {
-    kerneltypes = d.getVar('KERNEL_IMAGETYPES') or ""
-    if 'fitImage' in kerneltypes.split():
-        depends = d.getVar("DEPENDS")
-        depends = "%s u-boot-mkimage-native dtc-native" % depends
-        d.setVar("DEPENDS", depends)
-
-        uarch = d.getVar("UBOOT_ARCH")
-        if uarch == "arm64":
-            replacementtype = "Image"
-        elif uarch == "mips":
-            replacementtype = "vmlinuz.bin"
-        elif uarch == "x86":
-            replacementtype = "bzImage"
-        elif uarch == "microblaze":
-            replacementtype = "linux.bin"
-        else:
-            replacementtype = "zImage"
-
-        # Override KERNEL_IMAGETYPE_FOR_MAKE variable, which is internal
-        # to kernel.bbclass . We have to override it, since we pack zImage
-        # (at least for now) into the fitImage .
-        typeformake = d.getVar("KERNEL_IMAGETYPE_FOR_MAKE") or ""
-        if 'fitImage' in typeformake.split():
-            d.setVar('KERNEL_IMAGETYPE_FOR_MAKE', typeformake.replace('fitImage', replacementtype))
-
-        image = d.getVar('INITRAMFS_IMAGE')
-        if image:
-            d.appendVarFlag('do_assemble_fitimage_initramfs', 'depends', ' ${INITRAMFS_IMAGE}:do_image_complete')
-
-        # Verified boot will sign the fitImage and append the public key to
-        # U-boot dtb. We ensure the U-Boot dtb is deployed before assembling
-        # the fitImage:
-        if d.getVar('UBOOT_SIGN_ENABLE'):
-            uboot_pn = d.getVar('PREFERRED_PROVIDER_u-boot') or 'u-boot'
-            d.appendVarFlag('do_assemble_fitimage', 'depends', ' %s:do_deploy' % uboot_pn)
-
-        if d.getVar('FITIMAGE_PACK_TEE') == "1":
-            d.appendVarFlag('do_assemble_fitimage', 'depends', ' optee-os:do_deploy')
-}
-
-# Options for the device tree compiler passed to mkimage '-D' feature:
-UBOOT_MKIMAGE_DTCOPTS ??= ""
-
-fitimage_ti_secure() {
-	if test -f "${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh"; then
-		export TI_SECURE_DEV_PKG=${TI_SECURE_DEV_PKG}
-		${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh $1 $2
-	else
-		cp $1 $2
-	fi
-}
-
-#
-# Emit the fitImage ITS header
-#
-# $1 ... .its filename
-fitimage_emit_fit_header() {
-	cat << EOF >> ${1}
-/dts-v1/;
-
-/ {
-        description = "U-Boot fitImage for ${DISTRO_NAME}/${PV}/${MACHINE}";
-        #address-cells = <1>;
-EOF
-}
-
-#
-# Emit the fitImage section bits
-#
-# $1 ... .its filename
-# $2 ... Section bit type: imagestart - image section start
-#                          confstart  - configuration section start
-#                          sectend    - section end
-#                          fitend     - fitimage end
-#
-fitimage_emit_section_maint() {
-	case $2 in
-	imagestart)
-		cat << EOF >> ${1}
-
-        images {
-EOF
-	;;
-	confstart)
-		cat << EOF >> ${1}
-
-        configurations {
-EOF
-	;;
-	sectend)
-		cat << EOF >> ${1}
-        };
-EOF
-	;;
-	fitend)
-		cat << EOF >> ${1}
-};
-EOF
-	;;
-	esac
-}
-
-#
-# Emit the fitImage ITS kernel section
-#
-# $1 ... .its filename
-# $2 ... Image counter
-# $3 ... Path to kernel image
-# $4 ... Compression type
-fitimage_emit_section_kernel() {
-
-	kernel_csum=${FITIMAGE_HASH_ALGO}
-
-	ENTRYPOINT="${UBOOT_ENTRYPOINT}"
-	if test -n "${UBOOT_ENTRYSYMBOL}"; then
-		ENTRYPOINT=`${HOST_PREFIX}nm ${S}/vmlinux | \
-			awk '$4=="${UBOOT_ENTRYSYMBOL}" {print $2}'`
-	fi
-
-	cat << EOF >> ${1}
-                kernel-${2} {
-                        description = "Linux kernel";
-                        data = /incbin/("${3}");
-                        type = "kernel";
-                        arch = "${UBOOT_ARCH}";
-                        os = "linux";
-                        compression = "${4}";
-                        load = <${UBOOT_LOADADDRESS}>;
-                        entry = <${ENTRYPOINT}>;
-EOF
-	if test -n "${FITIMAGE_HASH_ALGO}"; then
-		cat << EOF >> ${1}
-                        hash-1 {
-                                algo = "${kernel_csum}";
-                        };
-EOF
-	fi
-	cat << EOF >> ${1}
-                };
-EOF
-}
-
-#
-# Emit the fitImage ITS DTB section
-#
-# $1 ... .its filename
-# $2 ... Image counter/name
-# $3 ... Path to DTB image
-# $4 ... Load address
-fitimage_emit_section_dtb() {
-
-	dtb_csum=${FITIMAGE_HASH_ALGO}
-	dtb_loadline="${4}"
-
-	cat << EOF >> ${1}
-                ${2} {
-                        description = "Flattened Device Tree blob";
-                        data = /incbin/("${3}");
-                        type = "flat_dt";
-                        arch = "${UBOOT_ARCH}";
-                        compression = "none";
-                        ${dtb_loadline}
-EOF
-	if test -n "${FITIMAGE_HASH_ALGO}"; then
-		cat << EOF >> ${1}
-                        hash-1 {
-                                algo = "${dtb_csum}";
-                        };
-EOF
-	fi
-	cat << EOF >> ${1}
-                };
-EOF
-}
-
-#
-# Emit the fitImage ITS TEE section
-#
-# $1 ... .its filename
-# $2 ... Image counter/name
-# $3 ... Path to TEE image
-fitimage_emit_section_tee() {
-
-	tee_csum=${FITIMAGE_HASH_ALGO}
-
-	cat << EOF >> ${1}
-                ${2} {
-                        description = "OPTEE OS Image";
-                        data = /incbin/("${3}");
-                        type = "tee";
-                        arch = "${UBOOT_ARCH}";
-                        compression = "none";
-EOF
-	if test -n "${FITIMAGE_HASH_ALGO}"; then
-		cat << EOF >> ${1}
-                        hash-1 {
-                                algo = "${tee_csum}";
-                        };
-EOF
-	fi
-	cat << EOF >> ${1}
-                };
-EOF
-}
-
-#
-# Emit the fitImage ITS setup section
-#
-# $1 ... .its filename
-# $2 ... Image counter
-# $3 ... Path to setup image
-fitimage_emit_section_setup() {
-
-	setup_csum=${FITIMAGE_HASH_ALGO}
-
-	cat << EOF >> ${1}
-                setup-${2} {
-                        description = "Linux setup.bin";
-                        data = /incbin/("${3}");
-                        type = "x86_setup";
-                        arch = "${UBOOT_ARCH}";
-                        os = "linux";
-                        compression = "none";
-                        load = <0x00090000>;
-                        entry = <0x00090000>;
-EOF
-	if test -n "${FITIMAGE_HASH_ALGO}"; then
-		cat << EOF >> ${1}
-                        hash-1 {
-                                algo = "${setup_csum}";
-                        };
-EOF
-	fi
-	cat << EOF >> ${1}
-                };
-EOF
-}
-
-#
-# Emit the fitImage ITS ramdisk section
-#
-# $1 ... .its filename
-# $2 ... Image counter
-# $3 ... Path to ramdisk image
-fitimage_emit_section_ramdisk() {
-
-	ramdisk_csum=${FITIMAGE_HASH_ALGO}
-	ramdisk_ctype="none"
-
-	case $3 in
-		*.gz|*.gz.sec)
-			ramdisk_ctype="gzip"
-			;;
-		*.bz2|*.bz2.sec)
-			ramdisk_ctype="bzip2"
-			;;
-		*.lzma|*.lzma.sec)
-			ramdisk_ctype="lzma"
-			;;
-		*.lzo|*.lzo.sec)
-			ramdisk_ctype="lzo"
-			;;
-		*.lz4|*.lz4.sec)
-			ramdisk_ctype="lz4"
-			;;
-	esac
-
-	cat << EOF >> ${1}
-                ramdisk-${2} {
-                        description = "ramdisk image";
-                        data = /incbin/("${3}");
-                        type = "ramdisk";
-                        arch = "${UBOOT_ARCH}";
-                        os = "linux";
-                        compression = "${ramdisk_ctype}";
-EOF
-	if test -n "${UBOOT_RD_LOADADDRESS}"; then
-		cat << EOF >> ${1}
-                        load = <${UBOOT_RD_LOADADDRESS}>;
-EOF
-	fi
-
-	if test -n "${UBOOT_RD_ENTRYPOINT}"; then
-		cat << EOF >> ${1}
-                        entry = <${UBOOT_RD_ENTRYPOINT}>;
-EOF
-	fi
-
-	if test -n "${FITIMAGE_HASH_ALGO}"; then
-		cat << EOF >> ${1}
-                        hash-1 {
-                                algo = "${ramdisk_csum}";
-                        };
-EOF
-	fi
-	cat << EOF >> ${1}
-                };
-EOF
-}
-
-#
-# Emit the fitImage ITS configuration section
-#
-# $1 ... .its filename
-# $2 ... Linux kernel ID
-# $3 ... DTB image ID/name
-# $4 ... ramdisk ID
-# $5 ... config ID
-# $6 ... tee ID/name
-# $7 ... default DTB ID
-fitimage_emit_section_config() {
-
-	conf_csum=${FITIMAGE_HASH_ALGO}
-	if [ -n "${UBOOT_SIGN_ENABLE}" ] ; then
-		conf_sign_keyname="${UBOOT_SIGN_KEYNAME}"
-	fi
-
-	sep=""
-	conf_desc=""
-	kernel_line=""
-	fdt_line=""
-	ramdisk_line=""
-	setup_line=""
-	default_line=""
-
-	if [ -n "${2}" ]; then
-		conf_desc="Linux kernel"
-		sep=", "
-		kernel_line="kernel = \"kernel-${2}\";"
-	fi
-
-	if [ -n "${3}" ]; then
-		conf_desc="${conf_desc}${sep}FDT blob"
-		sep=", "
-	fi
-
-	if [ -n "${4}" ]; then
-		conf_desc="${conf_desc}${sep}ramdisk"
-		sep=", "
-		ramdisk_line="ramdisk = \"ramdisk-${4}\";"
-	fi
-
-	if [ -n "${5}" ]; then
-		conf_desc="${conf_desc}${sep}setup"
-		sep=", "
-		setup_line="setup = \"setup-${5}\";"
-	fi
-
-	if [ -n "${6}" -a "x${FITIMAGE_PACK_TEE}" = "x1" ]; then
-		if [ "x${FITIMAGE_TEE_BY_NAME}" = "x1" ]; then
-			loadables_line="loadables = \"${6}.optee\";"
-			loadables_pager_line="loadables = \"${6}-pager.optee\";"
-		else
-			loadables_line="loadables = \"tee-${6}\";"
-			nextnum=`expr ${6} + 1`
-			loadables_pager_line="loadables = \"tee-${nextnum}\";"
-		fi
-		final_conf_desc="${conf_desc}${sep}OPTEE OS Image"
-	else
-		loadables_line=""
-		loadables_pager_line=""
-		final_conf_desc="${conf_desc}"
-	fi
-
-	default_dtb_count=${7}
-	if [ "x${FITIMAGE_CONF_BY_NAME}" = "x1" ] ; then
-		default_conf_name="${FIT_CONF_DEFAULT_DTB}"
-	else
-		default_conf_name="conf-${default_dtb_count}"
-	fi
-	cat << EOF >> ${1}
-        default = "${default_conf_name}";
-EOF
-
-	dtbcount=1
-	for DTB in ${KERNEL_DEVICETREE}; do
-		DTB=$(basename "${DTB}")
-		dtb_ext=${DTB##*.}
-		if [ "x${FITIMAGE_CONF_BY_NAME}" = "x1" ] ; then
-			conf_name="${DTB}"
-		else
-			conf_name="conf-${dtbcount}"
-		fi
-
-		if [ "x${FITIMAGE_DTB_BY_NAME}" = "x1" ] ; then
-			fdt_line="fdt = \"${DTB}\";"
-		else
-			fdt_line="fdt = \"fdt-${dtbcount}\";"
-		fi
-
-# Generate a single configuration section
-			cat << EOF >> ${1}
-                ${conf_name} {
-                        description = "${final_conf_desc}";
-                        ${fdt_line}
-EOF
-			if [ "${dtb_ext}" != "dtbo" ]; then
-			cat << EOF >> ${1}
-                        ${kernel_line}
-                        ${ramdisk_line}
-                        ${setup_line}
-                        ${loadables_line}
-EOF
-			fi
-			if test -n "${FITIMAGE_HASH_ALGO}"; then
-				cat << EOF >> ${1}
-                        hash-1 {
-                                algo = "${conf_csum}";
-                        };
-EOF
-			fi
-
-			if [ ! -z "${conf_sign_keyname}" ] ; then
-
-				sign_line="sign-images = \"kernel\""
-
-				if [ -n "${3}" ]; then
-					sign_line="${sign_line}, \"fdt\""
-				fi
-
-				if [ -n "${4}" ]; then
-					sign_line="${sign_line}, \"ramdisk\""
-				fi
-
-				if [ -n "${5}" ]; then
-					sign_line="${sign_line}, \"setup\""
-				fi
-
-				sign_line="${sign_line};"
-
-				cat << EOF >> ${1}
-                        signature-1 {
-                                algo = "${conf_csum},rsa2048";
-                                key-name-hint = "${conf_sign_keyname}";
-                                ${sign_line}
-                        };
-EOF
-			fi
-
-			cat << EOF >> ${1}
-                };
-EOF
-# End single config section
-
-# Generate a single "pager" configuration section
-		if [ "${OPTEEPAGER}" = "y" ]; then
-			if [ "x${FITIMAGE_CONF_BY_NAME}" = "x1" ] ; then
-				conf_name="${DTB}-pager"
-			else
-				conf_name="conf-${dtbcount}"
-			fi
-
-			cat << EOF >> ${1}
-                ${conf_name} {
-                        description = "${final_conf_desc}";
-                        ${fdt_line}
-EOF
-			if [ "${dtb_ext}" != "dtbo" ]; then
-			cat << EOF >> ${1}
-                        ${kernel_line}
-                        ${ramdisk_line}
-                        ${setup_line}
-                        ${loadables_pager_line}
-EOF
-			fi
-			if test -n "${FITIMAGE_HASH_ALGO}"; then
-				cat << EOF >> ${1}
-                        hash-1 {
-                                algo = "${conf_csum}";
-                        };
-EOF
-			fi
-
-			if [ ! -z "${conf_sign_keyname}" ] ; then
-
-				sign_line="sign-images = \"kernel\""
-
-				if [ -n "${3}" ]; then
-					sign_line="${sign_line}, \"fdt\""
-				fi
-
-				if [ -n "${4}" ]; then
-					sign_line="${sign_line}, \"ramdisk\""
-				fi
-
-				if [ -n "${5}" ]; then
-					sign_line="${sign_line}, \"setup\""
-				fi
-
-				sign_line="${sign_line};"
-
-				cat << EOF >> ${1}
-                        signature-1 {
-                                algo = "${conf_csum},rsa2048";
-                                key-name-hint = "${conf_sign_keyname}";
-                                ${sign_line}
-                        };
-EOF
-			fi
-
-			cat << EOF >> ${1}
-                };
-EOF
-		fi
-# End single config section
-
-		dtbcount=`expr ${dtbcount} + 1`
-	done
-}
-
-#
-# Assemble fitImage
-#
-# $1 ... .its filename
-# $2 ... fitImage name
-# $3 ... include ramdisk
-fitimage_assemble() {
-	kernelcount=1
-	dtbcount=""
-	ramdiskcount=${3}
-	setupcount=""
-	teecount=1
-	default_dtb_count=1
-	rm -f ${1} arch/${ARCH}/boot/${2}
-
-	fitimage_emit_fit_header ${1}
-
-	#
-	# Step 1: Prepare a kernel image section.
-	#
-	fitimage_emit_section_maint ${1} imagestart
-
-	uboot_prep_kimage
-	fitimage_ti_secure linux.bin linux.bin.sec
-	fitimage_emit_section_kernel ${1} "${kernelcount}" linux.bin.sec "${linux_comp}"
-
-	#
-	# Step 2: Prepare a DTB image section
-	#
-	if test -n "${KERNEL_DEVICETREE}"; then
-		dtbcount=1
-		dtboaddress="${UBOOT_DTBO_LOADADDRESS}"
-		for DTB in ${KERNEL_DEVICETREE}; do
-			if [ "${DTB}" = "${FIT_CONF_DEFAULT_DTB}" ]; then
-				default_dtb_count=${dtbcount}
-			fi
-			if echo ${DTB} | grep -q '/dts/'; then
-				bbwarn "${DTB} contains the full path to the the dts file, but only the dtb name should be used."
-				DTB=`basename ${DTB} | sed 's,\.dts$,.dtb,g'`
-			fi
-			DTB_PATH="arch/${ARCH}/boot/dts/${DTB}"
-			if [ ! -e "${DTB_PATH}" ]; then
-				DTB_PATH="arch/${ARCH}/boot/${DTB}"
-			fi
-			DTB=$(basename "${DTB}")
-
-			dtb_ext=${DTB##*.}
-			if [ "${dtb_ext}" = "dtbo" ]; then
-				if [ -n "${UBOOT_DTBO_LOADADDRESS}" ]; then
-					dtb_loadline="load = <${dtboaddress}>;"
-					num1=`printf "%d\n" ${dtboaddress}`
-					num2=`printf "%d\n" ${UBOOT_DTBO_OFFSET}`
-					num3=`expr $num1 + $num2`
-					dtboaddress=`printf "0x%x\n" $num3`
-				fi
-			elif [ -n "${UBOOT_DTB_LOADADDRESS}" ]; then
-				dtb_loadline="load = <${UBOOT_DTB_LOADADDRESS}>;"
-			fi
-
-			fitimage_ti_secure ${DTB_PATH} ${DTB_PATH}.sec
-			if [ "x${FITIMAGE_DTB_BY_NAME}" = "x1" ] ; then
-				fitimage_emit_section_dtb ${1} ${DTB} ${DTB_PATH}.sec "${dtb_loadline}"
-			else
-				fitimage_emit_section_dtb ${1} "fdt-${dtbcount}" ${DTB_PATH}.sec "${dtb_loadline}"
-			fi
-			if [ "x${dtbcount}" = "x1" ]; then
-				dtbref=${DTB}
-			fi
-			dtbcount=`expr ${dtbcount} + 1`
-		done
-	fi
-
-	#
-	# Step 2a: Prepare OP/TEE image section
-	#
-	if [ "x${FITIMAGE_PACK_TEE}" = "x1" ] ; then
-		mkdir -p ${B}/usr
-		rm -f ${B}/usr/${OPTEEFLAVOR}.optee
-		if [ -e "${DEPLOY_DIR_IMAGE}/${OPTEEFLAVOR}.optee" ]; then
-			cp ${DEPLOY_DIR_IMAGE}/${OPTEEFLAVOR}.optee ${B}/usr/.
-		fi
-		TEE_PATH="usr/${OPTEEFLAVOR}.optee"
-		fitimage_ti_secure ${TEE_PATH} ${TEE_PATH}.sec
-		if [ "x${FITIMAGE_TEE_BY_NAME}" = "x1" ] ; then
-			fitimage_emit_section_tee ${1} ${OPTEEFLAVOR}.optee ${TEE_PATH}.sec
-		else
-			fitimage_emit_section_tee ${1} "tee-${teecount}" ${TEE_PATH}.sec
-		fi
-
-		if [ "${OPTEEPAGER}" = "y" ]; then
-			teecount=`expr ${teecount} + 1`
-			rm -f ${B}/usr/${OPTEEFLAVOR}-pager.optee
-			if [ -e "${DEPLOY_DIR_IMAGE}/${OPTEEFLAVOR}-pager.optee" ]; then
-				cp ${DEPLOY_DIR_IMAGE}/${OPTEEFLAVOR}-pager.optee ${B}/usr/.
-			fi
-			TEE_PATH="usr/${OPTEEFLAVOR}-pager.optee"
-			fitimage_ti_secure ${TEE_PATH} ${TEE_PATH}.sec
-			if [ "x${FITIMAGE_TEE_BY_NAME}" = "x1" ] ; then
-				fitimage_emit_section_tee ${1} ${OPTEEFLAVOR}-pager.optee ${TEE_PATH}.sec
-			else
-				fitimage_emit_section_tee ${1} "tee-${teecount}" ${TEE_PATH}.sec
-			fi
-		fi
-	fi
-
-	#
-	# Step 3: Prepare a setup section. (For x86)
-	#
-	if test -e arch/${ARCH}/boot/setup.bin ; then
-		setupcount=1
-		fitimage_emit_section_setup ${1} "${setupcount}" arch/${ARCH}/boot/setup.bin
-	fi
-
-	#
-	# Step 4: Prepare a ramdisk section.
-	#
-	if [ "x${ramdiskcount}" = "x1" ] ; then
-		# Find and use the first initramfs image archive type we find
-		for img in cpio.lz4 cpio.lzo cpio.lzma cpio.xz cpio.gz cpio; do
-			initramfs_path="${DEPLOY_DIR_IMAGE}/${INITRAMFS_IMAGE}-${MACHINE}.${img}"
-			initramfs_local="usr/${INITRAMFS_IMAGE}-${MACHINE}.${img}"
-			echo "Using $initramfs_path"
-			if [ -e "${initramfs_path}" ]; then
-				fitimage_ti_secure ${initramfs_path} ${initramfs_local}.sec
-				fitimage_emit_section_ramdisk ${1} "${ramdiskcount}" ${initramfs_local}.sec
-				break
-			fi
-		done
-	fi
-
-	fitimage_emit_section_maint ${1} sectend
-
-	# Force the first Kernel and DTB in the default config
-	kernelcount=1
-	if test -n "${dtbcount}"; then
-		dtbcount=1
-	fi
-	teecount=1
-
-	#
-	# Step 5: Prepare a configurations section
-	#
-	fitimage_emit_section_maint ${1} confstart
-
-	if [ "x${FITIMAGE_DTB_BY_NAME}" != "x1" ] ; then
-		dtbref="fdt-${dtbcount}"
-	fi
-	if [ "x${FITIMAGE_TEE_BY_NAME}" = "x1" ] ; then
-		teeref="${OPTEEFLAVOR}"
-	else
-		teeref="${teecount}"
-	fi
-	fitimage_emit_section_config ${1} "${kernelcount}" "${dtbref}" "${ramdiskcount}" "${setupcount}" "${teeref}" "${default_dtb_count}"
-
-	fitimage_emit_section_maint ${1} sectend
-
-	fitimage_emit_section_maint ${1} fitend
-
-	#
-	# Step 6: Assemble the image
-	#
-	uboot-mkimage \
-		${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \
-		-f ${1} \
-		arch/${ARCH}/boot/${2}
-
-	#
-	# Step 7: Sign the image and add public key to U-Boot dtb
-	#
-	if [ "x${UBOOT_SIGN_ENABLE}" = "x1" ] ; then
-		uboot-mkimage \
-			${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \
-			-F -k "${UBOOT_SIGN_KEYDIR}" \
-			-K "${DEPLOY_DIR_IMAGE}/${UBOOT_DTB_BINARY}" \
-			-r arch/${ARCH}/boot/${2}
-	fi
-}
-
-do_assemble_fitimage() {
-	if echo ${KERNEL_IMAGETYPES} | grep -wq "fitImage"; then
-		cd ${B}
-		fitimage_assemble fit-image.its fitImage
-	fi
-}
-
-addtask assemble_fitimage before do_install after do_compile
-
-do_assemble_fitimage_initramfs() {
-	if echo ${KERNEL_IMAGETYPES} | grep -wq "fitImage" && \
-		test -n "${INITRAMFS_IMAGE}" ; then
-		cd ${B}
-		fitimage_assemble fit-image-${INITRAMFS_IMAGE}.its fitImage-${INITRAMFS_IMAGE} 1
-	fi
-}
-
-addtask assemble_fitimage_initramfs before do_deploy after do_install
-
-FITIMAGE_ITS_SUFFIX ?= "its"
-FITIMAGE_ITB_SUFFIX ?= "itb"
-
-FITIMAGE_ITS_IMAGE ?= "fitImage-its-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-${DATETIME}.${FITIMAGE_ITS_SUFFIX}"
-FITIMAGE_ITS_IMAGE[vardepsexclude] = "DATETIME"
-FITIMAGE_ITS_BINARY ?= "fitImage-its.${FITIMAGE_ITS_SUFFIX}"
-FITIMAGE_ITS_SYMLINK ?= "fitImage-its-${MACHINE}.${FITIMAGE_ITS_SUFFIX}"
-
-FITIMAGE_ITB_IMAGE ?= "fitImage-linux.bin-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-${DATETIME}.${FITIMAGE_ITB_SUFFIX}"
-FITIMAGE_ITB_IMAGE[vardepsexclude] = "DATETIME"
-FITIMAGE_ITB_BINARY ?= "fitImage-linux.bin.${FITIMAGE_ITB_SUFFIX}"
-FITIMAGE_ITB_SYMLINK ?= "fitImage-linux.bin-${MACHINE}.${FITIMAGE_ITB_SUFFIX}"
-
-FITIMAGE_INITRAMFS_ITS_IMAGE ?= "fitImage-its-${INITRAMFS_IMAGE}-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-${DATETIME}.${FITIMAGE_ITS_SUFFIX}"
-FITIMAGE_INITRAMFS_ITS_IMAGE[vardepsexclude] = "DATETIME"
-FITIMAGE_INITRAMFS_ITS_BINARY ?= "fitImage-its-${INITRAMFS_IMAGE}.${FITIMAGE_ITS_SUFFIX}"
-FITIMAGE_INITRAMFS_ITS_SYMLINK ?= "fitImage-its-${INITRAMFS_IMAGE}-${MACHINE}.${FITIMAGE_ITS_SUFFIX}"
-
-FITIMAGE_INITRAMFS_ITB_IMAGE ?= "fitImage-${INITRAMFS_IMAGE}-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-${DATETIME}.${FITIMAGE_ITB_SUFFIX}"
-FITIMAGE_INITRAMFS_ITB_IMAGE[vardepsexclude] = "DATETIME"
-FITIMAGE_INITRAMFS_ITB_BINARY ?= "fitImage-${INITRAMFS_IMAGE}.${FITIMAGE_ITB_SUFFIX}"
-FITIMAGE_INITRAMFS_ITB_SYMLINK ?= "fitImage-${INITRAMFS_IMAGE}-${MACHINE}.${FITIMAGE_ITB_SUFFIX}"
-
-kernel_do_deploy:append() {
-	# Update deploy directory
-	if echo ${KERNEL_IMAGETYPES} | grep -wq "fitImage"; then
-		cd ${B}
-		echo "Copying fit-image.its source file..."
-		install -m 0644 fit-image.its ${DEPLOYDIR}/${FITIMAGE_ITS_IMAGE}
-		install -m 0644 arch/${ARCH}/boot/fitImage ${DEPLOYDIR}/${FITIMAGE_ITB_IMAGE}
-
-		if [ -n "${INITRAMFS_IMAGE}" ]; then
-			echo "Copying fit-image-${INITRAMFS_IMAGE}.its source file..."
-			install -m 0644 fit-image-${INITRAMFS_IMAGE}.its ${DEPLOYDIR}/${FITIMAGE_INITRAMFS_ITS_IMAGE}
-			install -m 0644 arch/${ARCH}/boot/fitImage-${INITRAMFS_IMAGE} ${DEPLOYDIR}/${FITIMAGE_INITRAMFS_ITB_IMAGE}
-		fi
-
-		cd ${DEPLOYDIR}
-		ln -sf ${FITIMAGE_ITS_IMAGE} ${FITIMAGE_ITS_SYMLINK}
-		ln -sf ${FITIMAGE_ITS_IMAGE} ${FITIMAGE_ITS_BINARY}
-		ln -sf ${FITIMAGE_ITB_IMAGE} ${FITIMAGE_ITB_SYMLINK}
-		ln -sf ${FITIMAGE_ITB_IMAGE} ${FITIMAGE_ITB_BINARY}
-
-		if [ -n "${INITRAMFS_IMAGE}" ]; then
-			ln -sf ${FITIMAGE_INITRAMFS_ITS_IMAGE} ${FITIMAGE_INITRAMFS_ITS_SYMLINK}
-			ln -sf ${FITIMAGE_INITRAMFS_ITS_IMAGE} ${FITIMAGE_INITRAMFS_ITS_BINARY}
-			ln -sf ${FITIMAGE_INITRAMFS_ITB_IMAGE} ${FITIMAGE_INITRAMFS_ITB_SYMLINK}
-			ln -sf ${FITIMAGE_INITRAMFS_ITB_IMAGE} ${FITIMAGE_INITRAMFS_ITB_BINARY}
-		fi
-	fi
-}

meta-ti-bsp/classes/ti-devicetree-prefix.bbclass

@@ -1,43 +0,0 @@
-# Generate list of DTBs from the kernel source
-def get_dtbs_from_kernel(dts_dir, dts_prefix):
-    import os
-    import glob
-    matches = []
-
-    for prefix in dts_prefix.split():
-        filenames = glob.glob(dts_dir + prefix + '*.dts')
-        filenames += glob.glob(dts_dir + prefix + '*.dtso')
-        for filename in filenames:
-            # Before v6.2 kernels DTB Overlays shared the same name as DTB files
-            # so we need to search the file to find the type
-            with open(filename) as f:
-                file_postfix = '.dtbo' if '/plugin/;' in f.read() else '.dtb'
-            filename = os.path.split(filename)[1]
-            filename = os.path.splitext(filename)[0] + file_postfix
-            filename = os.path.join(os.path.split(prefix)[0], filename)
-            matches.append(filename)
-    return ' '.join(matches)
-
-# Generate list of "merged" DTBs from the kernel source
-# It is TI custom feature to merge DTB overlays into a single DTB
-def get_merge_dtbs_from_kernel(dts_dir, dts_pattern):
-    import os
-    matches = []
-    if dts_dir == "":
-        return ' '
-    for pattern in dts_pattern.split():
-        pattern_dir = os.path.split(pattern)[0]
-        pattern_target = os.path.split(pattern)[1].replace(".","-") + "s"
-        makefile = dts_dir + "/" + pattern_dir + "/Makefile"
-        if os.path.exists(makefile):
-            with open(makefile) as f:
-                if pattern_target in f.read():
-                    matches.append(pattern)
-    return ' '.join(matches)
-
-KERNEL_DEVICETREE = " \
-    ${@get_dtbs_from_kernel('${STAGING_KERNEL_DIR}/arch/${ARCH}/boot/dts/', '${KERNEL_DEVICETREE_PREFIX}')} \
-    ${@get_merge_dtbs_from_kernel('${STAGING_KERNEL_DIR}/arch/${ARCH}/boot/dts/', '${KERNEL_DEVICETREE_DTBMERGE}')} \
-"
-
-do_image_wic[depends] += "virtual/kernel:do_shared_workdir"

meta-ti-bsp/classes/ti-secdev.bbclass

@@ -1,21 +0,0 @@
-# Helper class to prepare correct environment for signing with TI Security Development Tools
-
-# K3 SECDEV scripts use OpenSSL
-DEPENDS:append:k3 = " openssl-native"
-DEPENDS:append:k3r5 = " openssl-native"
-
-# Use package version of TI SECDEV for K3 if one is not provided through the environment
-DEPENDS:append:k3 = "${@ '' if d.getVar('TI_SECURE_DEV_PKG_K3') else ' ti-k3-secdev-native' }"
-DEPENDS:append:k3r5 = "${@ '' if d.getVar('TI_SECURE_DEV_PKG_K3') else ' ti-k3-secdev-native' }"
-TI_K3_SECDEV_INSTALL_DIR = "${STAGING_DIR_NATIVE}${datadir}/ti/ti-k3-secdev"
-TI_SECURE_DEV_PKG:k3 = "${@ d.getVar('TI_SECURE_DEV_PKG_K3') or d.getVar('TI_K3_SECDEV_INSTALL_DIR') }"
-TI_SECURE_DEV_PKG:k3r5 = "${@ d.getVar('TI_SECURE_DEV_PKG_K3') or d.getVar('TI_K3_SECDEV_INSTALL_DIR') }"
-
-# For non-K3 we require the SECDEV tools be provided through the environment with the following vars
-TI_SECURE_DEV_PKG:ti33x = "${TI_SECURE_DEV_PKG_CAT}/am3x"
-TI_SECURE_DEV_PKG:ti43x = "${TI_SECURE_DEV_PKG_CAT}/am4x"
-TI_SECURE_DEV_PKG:am57xx = "${TI_SECURE_DEV_PKG_AUTO}/am5x"
-TI_SECURE_DEV_PKG:dra7xx = "${TI_SECURE_DEV_PKG_AUTO}/dra7"
-
-# The SECDEV scripts may need their own location provided through the environment
-export TI_SECURE_DEV_PKG

meta-ti-bsp/classes/uboot-sign-legacyhs.bbclass

@@ -1,131 +0,0 @@
-# This file is part of U-Boot verified boot support and is intended to be
-# inherited from u-boot recipe and from kernel-fitimage.bbclass.
-#
-# The signature procedure requires the user to generate an RSA key and
-# certificate in a directory and to define the following variable:
-#
-#   UBOOT_SIGN_KEYDIR = "/keys/directory"
-#   UBOOT_SIGN_KEYNAME = "dev" # keys name in keydir (eg. "dev.crt", "dev.key")
-#   UBOOT_MKIMAGE_DTCOPTS = "-I dts -O dtb -p 2000"
-#   UBOOT_SIGN_ENABLE = "1"
-#
-# As verified boot depends on fitImage generation, following is also required:
-#
-#   KERNEL_CLASSES ?= " kernel-fitimage "
-#   KERNEL_IMAGETYPE ?= "fitImage"
-#
-# The signature support is limited to the use of CONFIG_OF_SEPARATE in U-Boot.
-#
-# The tasks sequence is set as below, using DEPLOY_IMAGE_DIR as common place to
-# treat the device tree blob:
-#
-# * u-boot:do_install:append
-#   Install UBOOT_DTB_BINARY to datadir, so that kernel can use it for
-#   signing, and kernel will deploy UBOOT_DTB_BINARY after signs it.
-#
-# * virtual/kernel:do_assemble_fitimage
-#   Sign the image
-#
-# * u-boot:do_deploy[postfuncs]
-#   Deploy files like UBOOT_DTB_IMAGE, UBOOT_DTB_SYMLINK and others.
-#
-# For more details on signature process, please refer to U-Boot documentation.
-
-# Signature activation.
-UBOOT_SIGN_ENABLE ?= "0"
-
-# Default value for deployment filenames.
-UBOOT_DTB_IMAGE ?= "u-boot-${MACHINE}-${PV}-${PR}.dtb"
-UBOOT_DTB_BINARY ?= "u-boot.dtb"
-UBOOT_DTB_SYMLINK ?= "u-boot-${MACHINE}.dtb"
-UBOOT_NODTB_IMAGE ?= "u-boot-nodtb-${MACHINE}-${PV}-${PR}.${UBOOT_SUFFIX}"
-UBOOT_NODTB_BINARY ?= "u-boot-nodtb.${UBOOT_SUFFIX}"
-UBOOT_NODTB_SYMLINK ?= "u-boot-nodtb-${MACHINE}.${UBOOT_SUFFIX}"
-
-# Functions in this bbclass is for u-boot only
-UBOOT_PN = "${@d.getVar('PREFERRED_PROVIDER_u-boot') or 'u-boot'}"
-
-concat_dtb_helper() {
-	if [ -e "${UBOOT_DTB_BINARY}" ]; then
-		ln -sf ${UBOOT_DTB_IMAGE} ${DEPLOYDIR}/${UBOOT_DTB_BINARY}
-		ln -sf ${UBOOT_DTB_IMAGE} ${DEPLOYDIR}/${UBOOT_DTB_SYMLINK}
-	fi
-
-	if [ -f "${UBOOT_NODTB_BINARY}" ]; then
-		install ${UBOOT_NODTB_BINARY} ${DEPLOYDIR}/${UBOOT_NODTB_IMAGE}
-		ln -sf ${UBOOT_NODTB_IMAGE} ${DEPLOYDIR}/${UBOOT_NODTB_SYMLINK}
-		ln -sf ${UBOOT_NODTB_IMAGE} ${DEPLOYDIR}/${UBOOT_NODTB_BINARY}
-	fi
-
-	# Concatenate U-Boot w/o DTB & DTB with public key
-	# (cf. kernel-fitimage.bbclass for more details)
-	deployed_uboot_dtb_binary='${DEPLOY_DIR_IMAGE}/${UBOOT_DTB_IMAGE}'
-	if [ "x${UBOOT_SUFFIX}" = "ximg" -o "x${UBOOT_SUFFIX}" = "xrom" ] && \
-		[ -e "$deployed_uboot_dtb_binary" ]; then
-		oe_runmake EXT_DTB=$deployed_uboot_dtb_binary
-		install ${UBOOT_BINARY} ${DEPLOYDIR}/${UBOOT_IMAGE}
-	elif [ -e "${DEPLOYDIR}/${UBOOT_NODTB_IMAGE}" -a -e "$deployed_uboot_dtb_binary" ]; then
-		cd ${DEPLOYDIR}
-		cat ${UBOOT_NODTB_IMAGE} $deployed_uboot_dtb_binary | tee ${B}/${CONFIG_B_PATH}/${UBOOT_BINARY} > ${UBOOT_IMAGE}
-	else
-		bbwarn "Failure while adding public key to u-boot binary. Verified boot won't be available."
-	fi
-}
-
-concat_dtb() {
-	if [ "${UBOOT_SIGN_ENABLE}" = "1" -a "${PN}" = "${UBOOT_PN}" -a -n "${UBOOT_DTB_BINARY}" ]; then
-		mkdir -p ${DEPLOYDIR}
-		if [ -n "${UBOOT_CONFIG}" ]; then
-			for config in ${UBOOT_MACHINE}; do
-				CONFIG_B_PATH="${config}"
-				cd ${B}/${config}
-				concat_dtb_helper
-			done
-		else
-			CONFIG_B_PATH=""
-			cd ${B}
-			concat_dtb_helper
-		fi
-	fi
-}
-
-# Install UBOOT_DTB_BINARY to datadir, so that kernel can use it for
-# signing, and kernel will deploy UBOOT_DTB_BINARY after signs it.
-install_helper() {
-	if [ -f "${UBOOT_DTB_BINARY}" ]; then
-		install -d ${D}${datadir}
-		# UBOOT_DTB_BINARY is a symlink to UBOOT_DTB_IMAGE, so we
-		# need both of them.
-		install ${UBOOT_DTB_BINARY} ${D}${datadir}/${UBOOT_DTB_IMAGE}
-		ln -sf ${UBOOT_DTB_IMAGE} ${D}${datadir}/${UBOOT_DTB_BINARY}
-	else
-		bbwarn "${UBOOT_DTB_BINARY} not found"
-	fi
-}
-
-do_install:append() {
-	if [ "${UBOOT_SIGN_ENABLE}" = "1" -a "${PN}" = "${UBOOT_PN}" -a -n "${UBOOT_DTB_BINARY}" ]; then
-		if [ -n "${UBOOT_CONFIG}" ]; then
-			for config in ${UBOOT_MACHINE}; do
-				cd ${B}/${config}
-				install_helper
-			done
-		else
-			cd ${B}
-			install_helper
-		fi
-	fi
-}
-
-python () {
-    if d.getVar('UBOOT_SIGN_ENABLE') == '1' and d.getVar('PN') == d.getVar('UBOOT_PN') and d.getVar('UBOOT_DTB_BINARY'):
-        kernel_pn = d.getVar('PREFERRED_PROVIDER_virtual/kernel')
-
-        # Make "bitbake u-boot -cdeploy" deploys the signed u-boot.dtb
-        d.appendVarFlag('do_deploy', 'depends', ' %s:do_deploy' % kernel_pn)
-
-        # kernerl's do_deploy is a litle special, so we can't use
-        # do_deploy:append, otherwise it would override
-        # kernel_do_deploy.
-        d.appendVarFlag('do_deploy', 'prefuncs', ' concat_dtb')
-}

meta-ti-bsp/conf/layer.conf

@@ -1,38 +0,0 @@
-# We have a conf and classes directory, append to BBPATH
-BBPATH .= ":${LAYERDIR}"
-METATIBASE := '${@os.path.normpath("${LAYERDIR}/")}'
-
-# We have a recipes directory, add to BBFILES
-BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
-
-BBFILE_COLLECTIONS += "meta-ti-bsp"
-BBFILE_PATTERN_meta-ti-bsp := "^${LAYERDIR}/"
-BBFILE_PRIORITY_meta-ti-bsp = "6"
-
-LAYERSERIES_COMPAT_meta-ti-bsp = "scarthgap"
-
-LICENSE_PATH += "${LAYERDIR}/licenses"
-
-LAYERDEPENDS_meta-ti-bsp = " \
-    core \
-    meta-arm \
-"
-
-LAYERRECOMMENDS_meta-ti-bsp = " \
-    openembedded-layer \
-"
-
-BBFILES_DYNAMIC += " \
-    openembedded-layer:${LAYERDIR}/dynamic-layers/openembedded-layer/recipes*/*/*.bbappend \
-"
-
-SIGGEN_EXCLUDERECIPES_ABISAFE += " \
-    mesa-pvr \
-"
-
-HOSTTOOLS_NONFATAL += "truncate xxd comm"
-
-TI_COMMON_DEPLOY ?= "${TOPDIR}/deploy-ti"
-DEPLOY_DIR_IMAGE:ti-soc = "${TI_COMMON_DEPLOY}/images/${MACHINE}"
-SDK_DEPLOY:ti-soc = "${TI_COMMON_DEPLOY}/sdk"
-PSEUDO_IGNORE_PATHS:append:ti-soc = ",${TI_COMMON_DEPLOY}"

meta-ti-bsp/conf/machine/am335x-evm.conf

@@ -1,33 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM335x EVM
-#@DESCRIPTION: Machine configuration for the TI AM335x EVM
-
-require conf/machine/include/ti33x.inc
-
-MACHINE_FEATURES += "screen touchscreen"
-
-IMAGE_FSTYPES += "ubifs ubi"
-
-# Normally AM335 boards use ttyS0, but ICE uses ttyS3, so try both
-SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS3"
-
-# UBI information.  Note that this is board and kernel specific.  Changes
-# in your kernel port may require changes in these variables.  For more
-# details about this board please see
-# http://processors.wiki.ti.com/index.php/UBIFS_Support
-
-# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
-# From dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: logical eraseblock size:    126976 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 1988 LEBs
-MKUBIFS_ARGS ?= "-F -m 2048 -e 126976 -c 16000"
-
-# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
-# from dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: physical eraseblock size:   131072 bytes (128 KiB)
-# UBI: sub-page size:              512
-# UBI: VID header offset:          2048 (aligned 2048)
-UBINIZE_ARGS ?= "-m 2048 -p 128KiB -s 512 -O 2048"

meta-ti-bsp/conf/machine/am335x-hs-evm.conf

@@ -1,21 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM335x HS EVM
-#@DESCRIPTION: Machine configuration for the TI AM335x HS EVM
-
-require conf/machine/am335x-evm.conf
-
-UBOOT_MACHINE = ""
-# Last config in the list is default
-UBOOT_CONFIG ??= "uart mmc"
-UBOOT_CONFIG[uart] = "am335x_hs_evm_uart_config"
-UBOOT_CONFIG[mmc] = "am335x_hs_evm_config"
-
-# FIT image for legacy secure devices
-KERNEL_CLASSES += " kernel-fitimage-legacyhs"
-KERNEL_IMAGETYPES += " fitImage"
-
-# FIT image settings
-FITIMAGE_HASH_ALGO = ""
-FITIMAGE_DTB_BY_NAME = "1"
-FITIMAGE_TEE_BY_NAME = "1"
-FITIMAGE_CONF_BY_NAME = "1"

meta-ti-bsp/conf/machine/am437x-evm.conf

@@ -1,32 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM437x EVM
-#@DESCRIPTION: Machine configuration for the TI AM437x EVM
-
-require conf/machine/include/ti43x.inc
-
-MACHINE_FEATURES += "touchscreen"
-
-IMAGE_FSTYPES += "ubifs ubi"
-
-SERIAL_CONSOLES = "115200;ttyS0"
-
-# UBI information.  Note that this is board and kernel specific.  Changes
-# in your kernel port may require changes in these variables.  For more
-# details about this board please see
-# http://processors.wiki.ti.com/index.php/UBIFS_Support
-
-# do ubiattach /dev/ubi_ctrl -m 11 -O 4096
-# From dmesg:
-# UBI: smallest flash I/O unit:    4096
-# UBI: logical eraseblock size:    253952 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 994 LEBs
-MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 8000"
-
-# do ubiattach /dev/ubi_ctrl -m 11 -O 4096
-# from dmesg:
-# UBI: smallest flash I/O unit:    4096
-# UBI: physical eraseblock size:   262144 bytes (256 KiB)
-# UBI: sub-page size:              4096
-# UBI: VID header offset:          4096 (aligned 4096)
-UBINIZE_ARGS = "-m 4096 -p 256KiB -s 4096 -O 4096"

meta-ti-bsp/conf/machine/am437x-hs-evm.conf

@@ -1,23 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM437x HS EVM
-#@DESCRIPTION: Machine configuration for the TI AM437x HS EVM
-
-require conf/machine/am437x-evm.conf
-
-UBOOT_MACHINE = "am43xx_hs_evm_config"
-
-OPTEEMACHINE = "ti-am43xx"
-OPTEEFLAVOR = "am43xx"
-
-EXTRA_IMAGEDEPENDS += "optee-os"
-
-# FIT image for legacy secure devices
-KERNEL_CLASSES += " kernel-fitimage-legacyhs"
-KERNEL_IMAGETYPES += " fitImage"
-
-# FIT image settings
-FITIMAGE_HASH_ALGO = ""
-FITIMAGE_PACK_TEE = "1"
-FITIMAGE_DTB_BY_NAME = "1"
-FITIMAGE_TEE_BY_NAME = "1"
-FITIMAGE_CONF_BY_NAME = "1"

meta-ti-bsp/conf/machine/am57xx-evm.conf

@@ -1,67 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM57xx EVM
-#@DESCRIPTION: Machine configuration for the TI AM57xx EVM
-
-require conf/machine/include/am57xx.inc
-
-MACHINE_FEATURES += "touchscreen"
-
-SERIAL_CONSOLES = "115200;ttyS2"
-
-KERNEL_DEVICETREE_PREFIX = " \
-    am57 \
-    ov10635 \
-    ti/am57 \
-    ti/lcd \
-    ti/ov10635 \
-    ti/omap/am57 \
-"
-
-KERNEL_DEVICETREE_DTBMERGE = " \
-    am57xx-evm.dtb \
-    am57xx-evm-reva3.dtb \
-    ti/omap/am57xx-evm.dtb \
-    ti/omap/am57xx-evm-reva3.dtb \
-"
-
-KERNEL_DEVICETREE = " \
-    ti/omap/am571x-idk-touchscreen.dtbo \
-    ti/omap/am571x-idk.dtb \
-    ti/omap/am5729-beagleboneai.dtb \
-    ti/omap/am572x-idk-touchscreen.dtbo \
-    ti/omap/am572x-idk.dtb \
-    ti/omap/am574x-idk.dtb \
-    ti/omap/am57xx-beagle-x15-revb1.dtb \
-    ti/omap/am57xx-beagle-x15-revc.dtb \
-    ti/omap/am57xx-beagle-x15.dtb \
-    ti/omap/am57xx-cl-som-am57x.dtb \
-    ti/omap/am57xx-evm-reva3.dtb \
-    ti/omap/am57xx-evm.dtb \
-    ti/omap/am57xx-evm.dtbo \
-    ti/omap/am57xx-idk-lcd-osd101t2045.dtbo \
-    ti/omap/am57xx-idk-lcd-osd101t2587.dtbo \
-    ti/omap/am57xx-sbc-am57x.dtb \
-"
-
-UBOOT_MACHINE = "am57xx_evm_config"
-
-# UBI information.  Note that this is board and kernel specific.  Changes
-# in your kernel port may require changes in these variables.  For more
-# details about this board please see
-# http://processors.wiki.ti.com/index.php/UBIFS_Support
-
-# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
-# From dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: logical eraseblock size:    126976 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 1988 LEBs
-MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 8192"
-
-# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
-# from dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: physical eraseblock size:   131072 bytes (128 KiB)
-# UBI: sub-page size:              512
-# UBI: VID header offset:          2048 (aligned 2048)
-UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"

meta-ti-bsp/conf/machine/am57xx-hs-evm.conf

@@ -1,24 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM57xx HS EVM
-#@DESCRIPTION: Machine configuration for the TI AM57xx HS EVM
-
-require conf/machine/am57xx-evm.conf
-
-UBOOT_MACHINE = "am57xx_hs_evm_config"
-
-OPTEEMACHINE = "ti-am57xx"
-OPTEEFLAVOR = "am57xx"
-OPTEEPAGER = "y"
-
-EXTRA_IMAGEDEPENDS += "optee-os"
-
-# FIT image for legacy secure devices
-KERNEL_CLASSES += " kernel-fitimage-legacyhs"
-KERNEL_IMAGETYPES += " fitImage"
-
-# FIT image settings
-FITIMAGE_HASH_ALGO = ""
-FITIMAGE_PACK_TEE = "1"
-FITIMAGE_DTB_BY_NAME = "1"
-FITIMAGE_TEE_BY_NAME = "1"
-FITIMAGE_CONF_BY_NAME = "1"

meta-ti-bsp/conf/machine/am62axx-evm-k3r5.conf

@@ -1,13 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62A HS-FS EVM (R5F)
-#@DESCRIPTION: Machine configuration for the TI AM62A EVM (R5F core)
-
-require conf/machine/include/k3r5.inc
-
-SYSFW_SOC = "am62ax"
-SYSFW_CONFIG = "evm"
-SYSFW_SUFFIX = "hs-fs"
-
-UBOOT_MACHINE = "am62ax_evm_r5_defconfig"
-
-UBOOT_CONFIG_FRAGMENTS:ti-falcon = "k3_r5_falcon.config"

meta-ti-bsp/conf/machine/am62axx-evm.conf

@@ -1,29 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62AXX EVM
-#@DESCRIPTION: Machine configuration for the TI AM62AXX EVM
-
-require conf/machine/include/am62axx.inc
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-am62a7 \
-    ti/k3-am62x-sk \
-    ti/k3-fpdlink \
-    ti/k3-v3link \
-"
-
-KERNEL_DEVICETREE_DTBMERGE = " \
-    ti/k3-am62a7-sk-ub954-evm-ov2312.dtb \
-"
-
-KERNEL_DEVICETREE = " \
-    ti/k3-am62a7-phyboard-lyra-rdk.dtb \
-    ti/k3-am62a7-sk.dtb \
-    ti/k3-am62x-sk-csi2-imx219.dtbo \
-    ti/k3-am62x-sk-csi2-ov5640.dtbo \
-    ti/k3-am62x-sk-csi2-tevi-ov5640.dtbo \
-    ti/k3-am62x-sk-hdmi-audio.dtbo \
-"
-
-FIT_CONF_DEFAULT_DTB = "ti/k3-am62a7-sk.dtb"
-
-UBOOT_MACHINE = "am62ax_evm_a53_defconfig"

meta-ti-bsp/conf/machine/am62dxx-evm-k3r5.conf

@@ -1,11 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62D HS-FS EVM (R5F)
-#@DESCRIPTION: Machine configuration for the TI AM62D EVM (R5F core)
-
-require conf/machine/include/k3r5.inc
-
-SYSFW_SOC = "am62dx"
-SYSFW_CONFIG = "evm"
-SYSFW_SUFFIX = "hs-fs"
-
-UBOOT_MACHINE = "am62dx_evm_r5_defconfig"

meta-ti-bsp/conf/machine/am62dxx-evm.conf

@@ -1,18 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62DXX EVM
-#@DESCRIPTION: Machine configuration for the TI AM62DXX EVM
-
-require conf/machine/include/am62dxx.inc
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-am62d2 \
-    ti/k3-am62a7-sk-edgeai \
-"
-
-KERNEL_DEVICETREE = ""
-
-FIT_CONF_DEFAULT_DTB = "ti/k3-am62d2-evm.dtb"
-
-UBOOT_MACHINE = "am62dx_evm_a53_defconfig"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "ti-dac-fw"

meta-ti-bsp/conf/machine/am62lxx-evm.conf

@@ -1,19 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62L EVM
-#@DESCRIPTION: Machine configuration for the TI AM62L EVM
-
-require conf/machine/include/am62lxx.inc
-
-IMAGE_FSTYPES += "ubifs ubi"
-
-MKUBIFS_ARGS ?= "-F -m 4096 -e 258048 -c 8500"
-
-UBINIZE_ARGS ?= "-m 4096 -p 256KiB -s 1024 -O 1024"
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-am62l \
-"
-
-KERNEL_DEVICETREE = ""
-
-UBOOT_MACHINE = "am62lx_evm_defconfig"

meta-ti-bsp/conf/machine/am62pxx-evm-k3r5.conf

@@ -1,13 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62PX EVM (R5F)
-#@DESCRIPTION: Machine configuration for the TI AM62Px EVM (R5F core)
-
-require conf/machine/include/k3r5.inc
-
-SYSFW_SOC = "am62px"
-SYSFW_CONFIG = "evm"
-SYSFW_SUFFIX = "hs-fs"
-
-UBOOT_MACHINE = "am62px_evm_r5_defconfig"
-
-UBOOT_CONFIG_FRAGMENTS:ti-falcon = "k3_r5_falcon.config"

meta-ti-bsp/conf/machine/am62pxx-evm.conf

@@ -1,32 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62PX EVM
-#@DESCRIPTION: Machine configuration for the TI AM62PX EVM
-
-require conf/machine/include/am62pxx.inc
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-am62p5 \
-    ti/k3-am62x-sk-csi2 \
-    ti/k3-am62x-sk-hdmi \
-    ti/k3-am62x-sk-lpm \
-    ti/k3-v3link \
-"
-
-KERNEL_DEVICETREE = " \
-    ti/k3-am62p5-sk.dtb \
-    ti/k3-am62x-sk-csi2-imx219.dtbo \
-    ti/k3-am62x-sk-csi2-ov5640.dtbo \
-    ti/k3-am62x-sk-csi2-tevi-ov5640.dtbo \
-    ti/k3-am62x-sk-hdmi-audio.dtbo \
-"
-
-FIT_CONF_DEFAULT_DTB = "ti/k3-am62p5-sk.dtb"
-
-UBOOT_MACHINE = "am62px_evm_a53_defconfig"
-
-# UBOOT_CONFIG_FRAGMENTS holds the list of u-boot config fragments which has to be build
-# along with the base defconfig mentioned in UBOOT_MACHINE. Refer u-boot-mergeconfig.inc
-# under meta-ti-bsp/recipes-bsp/u-boot/ for more details.
-# For AM62P tisdk-display-cluster image, splash screen is handled by SBL.
-# Hence, disable the A53 based splash screen using the am62x_evm_prune_splashscreen.config fragment present in ti-u-boot tree
-UBOOT_CONFIG_FRAGMENTS = "${@oe.utils.conditional('DISPLAY_CLUSTER_ENABLE', '1', 'am62x_evm_prune_splashscreen.config', '', d)}"

meta-ti-bsp/conf/machine/am62xx-evm-k3r5.conf

@@ -1,13 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62XX EVM (R5F)
-#@DESCRIPTION: Machine configuration for the TI AM62xx EVM (R5F core)
-
-require conf/machine/include/k3r5.inc
-
-SYSFW_SOC = "am62x"
-SYSFW_CONFIG = "evm"
-SYSFW_SUFFIX = "hs-fs"
-
-UBOOT_MACHINE = "am62x_evm_r5_defconfig"
-
-UBOOT_CONFIG_FRAGMENTS:ti-falcon = "k3_r5_falcon.config"

meta-ti-bsp/conf/machine/am62xx-evm.conf

@@ -1,35 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62XX EVM
-#@DESCRIPTION: Machine configuration for the TI AM62XX EVM
-
-require conf/machine/include/am62xx.inc
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-am625 \
-    ti/k3-am62x-sk \
-"
-
-KERNEL_DEVICETREE = " \
-    ti/k3-am625-beagleplay-csi2-ov5640.dtbo \
-    ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtbo \
-    ti/k3-am625-beagleplay.dtb \
-    ti/k3-am625-phyboard-lyra-1-4-ghz-opp.dtbo \
-    ti/k3-am625-phyboard-lyra-rdk.dtb \
-    ti/k3-am625-sk.dtb \
-    ti/k3-am625-verdin-nonwifi-dahlia.dtb \
-    ti/k3-am625-verdin-nonwifi-dev.dtb \
-    ti/k3-am625-verdin-nonwifi-mallow.dtb \
-    ti/k3-am625-verdin-nonwifi-yavia.dtb \
-    ti/k3-am625-verdin-wifi-dahlia.dtb \
-    ti/k3-am625-verdin-wifi-dev.dtb \
-    ti/k3-am625-verdin-wifi-mallow.dtb \
-    ti/k3-am625-verdin-wifi-yavia.dtb \
-    ti/k3-am62x-sk-csi2-imx219.dtbo \
-    ti/k3-am62x-sk-csi2-ov5640.dtbo \
-    ti/k3-am62x-sk-csi2-tevi-ov5640.dtbo \
-    ti/k3-am62x-sk-hdmi-audio.dtbo \
-"
-
-FIT_CONF_DEFAULT_DTB = "ti/k3-am625-sk.dtb"
-
-UBOOT_MACHINE = "am62x_evm_a53_defconfig"

meta-ti-bsp/conf/machine/am62xx-lp-evm-k3r5.conf

@@ -1,13 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62XX LP GP EVM (R5F)
-#@DESCRIPTION: Machine configuration for the TI AM62xx LP GP EVM (R5F core)
-
-require conf/machine/include/k3r5.inc
-
-SYSFW_SOC = "am62x"
-SYSFW_CONFIG = "evm"
-SYSFW_SUFFIX = "hs-fs"
-
-UBOOT_MACHINE = "am62x_lpsk_r5_defconfig"
-
-UBOOT_CONFIG_FRAGMENTS:ti-falcon = "k3_r5_falcon.config"

meta-ti-bsp/conf/machine/am62xx-lp-evm.conf

@@ -1,27 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62XX LP EVM
-#@DESCRIPTION: Machine configuration for the TI AM62XX LP EVM
-
-require conf/machine/include/am62xx.inc
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-am62-lp \
-    ti/k3-am625-sk \
-    ti/k3-am62x-sk-dmtimer-pwm \
-    ti/k3-am62x-sk-eqep \
-    ti/k3-am62x-sk-hdmi \
-    ti/k3-am62x-sk-lpm \
-    ti/k3-am62x-sk-mcan \
-    ti/k3-am62x-sk-pwm \
-"
-
-KERNEL_DEVICETREE = " \
-    ti/k3-am62-lp-sk-nand.dtbo \
-    ti/k3-am62-lp-sk.dtb \
-    ti/k3-am625-sk.dtb \
-    ti/k3-am62x-sk-hdmi-audio.dtbo \
-"
-
-FIT_CONF_DEFAULT_DTB = "ti/k3-am62-lp-sk.dtb"
-
-UBOOT_MACHINE = "am62x_lpsk_a53_defconfig"

meta-ti-bsp/conf/machine/am62xxsip-evm-k3r5.conf

@@ -1,12 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62XX SIP EVM (R5F)
-#@DESCRIPTION: Machine configuration for the TI AM62xx SIP EVM (R5F core)
-
-require conf/machine/include/k3r5.inc
-
-SYSFW_SOC = "am62x"
-SYSFW_CONFIG = "evm"
-SYSFW_SUFFIX = "hs-fs"
-
-UBOOT_MACHINE = "am6254xxl_evm_r5_defconfig"
-UBOOT_MACHINE:bsp-ti-6_6 = "am62xsip_evm_r5_defconfig"

meta-ti-bsp/conf/machine/am62xxsip-evm.conf

@@ -1,29 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM62XX SIP EVM
-#@DESCRIPTION: Machine configuration for the TI AM62XX SIP EVM
-
-require conf/machine/include/am62xx.inc
-
-TFA_K3_BL32_BASE = "0x80080000"
-TFA_K3_BL32_BASE:bsp-ti-6_6 = ""
-
-TFA_K3_PRELOADED_BL33 = "0x82000000"
-TFA_K3_PRELOADED_BL33:bsp-ti-6_6 = ""
-
-OPTEE_K3_TZDRAM_START = "0x80080000"
-OPTEE_K3_TZDRAM_START:bsp-ti-6_6 = ""
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-am625 \
-    ti/k3-am62x-sk \
-"
-
-KERNEL_DEVICETREE = " \
-    ti/k3-am625-sk.dtb \
-"
-
-FIT_CONF_DEFAULT_DTB = "ti/k3-am6254xxl-sk.dtb"
-FIT_CONF_DEFAULT_DTB:bsp-ti-6_6 = "ti/k3-am625-sk.dtb"
-
-UBOOT_MACHINE = "am6254xxl_evm_a53_defconfig"
-UBOOT_MACHINE:bsp-ti-6_6 = "am62xsip_evm_a53_defconfig"

meta-ti-bsp/conf/machine/am64xx-evm-k3r5.conf

@@ -1,11 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM64xx EVM (R5F)
-#@DESCRIPTION: Machine configuration for the TI AM64xx EVM (R5F core)
-
-require conf/machine/include/k3r5.inc
-
-SYSFW_SOC = "am64x_sr2"
-SYSFW_CONFIG = "evm"
-SYSFW_SUFFIX = "hs-fs"
-
-UBOOT_MACHINE = "am64x_evm_r5_defconfig"

meta-ti-bsp/conf/machine/am64xx-evm.conf

@@ -1,7 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM64xx EVM
-#@DESCRIPTION: Machine configuration for the TI AM64xx EVM
-
-require conf/machine/include/am64xx.inc
-
-UBOOT_MACHINE = "am64x_evm_a53_defconfig"

meta-ti-bsp/conf/machine/am65xx-evm-k3r5.conf

@@ -1,11 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM65xx EVM (R5F)
-#@DESCRIPTION: Machine configuration for the TI AM65xx EVM (R5F core)
-
-require conf/machine/include/k3r5.inc
-
-SYSFW_SOC = "am65x_sr2"
-SYSFW_CONFIG = "evm"
-SYSFW_SUFFIX = "gp"
-
-UBOOT_MACHINE = "am65x_evm_r5_defconfig"

meta-ti-bsp/conf/machine/am65xx-evm.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM65xx EVM
-#@DESCRIPTION: Machine configuration for the TI AM65xx EVM
-
-require conf/machine/include/am65xx.inc
-
-UBOOT_MACHINE = "am65x_evm_a53_defconfig"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "prueth-fw pruhsr-fw prusw-fw"

meta-ti-bsp/conf/machine/am65xx-hs-evm-k3r5.conf

@@ -1,11 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM65xx HS EVM (R5F)
-#@DESCRIPTION: Machine configuration for the TI AM65xx HS EVM (R5F core)
-
-require conf/machine/include/k3r5.inc
-
-SYSFW_SOC = "am65x_sr2"
-SYSFW_CONFIG = "evm"
-SYSFW_SUFFIX = "hs"
-
-UBOOT_MACHINE = "am65x_evm_r5_defconfig"

meta-ti-bsp/conf/machine/am65xx-hs-evm.conf

@@ -1,7 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM65xx HS EVM
-#@DESCRIPTION: Machine configuration for the TI AM65xx HS EVM
-
-require conf/machine/include/am65xx.inc
-
-UBOOT_MACHINE = "am65x_evm_a53_defconfig"

meta-ti-bsp/conf/machine/am68-sk-k3r5.conf

@@ -1,11 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM68 SK (R5F)
-#@DESCRIPTION: Machine configuration for the TI AM68 SK (R5F core)
-
-require conf/machine/include/k3r5.inc
-
-SYSFW_SOC = "j721s2"
-SYSFW_CONFIG = "evm"
-SYSFW_SUFFIX = "hs-fs"
-
-UBOOT_MACHINE = "am68_sk_r5_defconfig"

meta-ti-bsp/conf/machine/am68-sk.conf

@@ -1,23 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM68 SK
-#@DESCRIPTION: Machine configuration for the TI AM68 SK
-
-require conf/machine/include/am68.inc
-
-TFA_K3_USART = "0x8"
-OPTEE_K3_USART = "0x8"
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-am68-sk \
-    ti/k3-fpdlink \
-    ti/k3-v3link \
-    ti/k3-j721e-sk-csi2-dual-imx219 \
-    ti/k3-j721e-sk-fpdlink-fusion \
-"
-
-KERNEL_DEVICETREE = " \
-    ti/k3-am68-sk-base-board.dtb \
-    ti/k3-j721e-sk-csi2-dual-imx219.dtbo \
-"
-
-UBOOT_MACHINE = "am68_sk_a72_defconfig"

meta-ti-bsp/conf/machine/am69-sk-k3r5.conf

@@ -1,11 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM69 SK (R5F)
-#@DESCRIPTION: Machine configuration for the TI AM69 SK (R5F core)
-
-require conf/machine/include/k3r5.inc
-
-SYSFW_SOC = "j784s4"
-SYSFW_CONFIG = "evm"
-SYSFW_SUFFIX = "hs-fs"
-
-UBOOT_MACHINE = "am69_sk_r5_defconfig"

meta-ti-bsp/conf/machine/am69-sk.conf

@@ -1,24 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM69 SK
-#@DESCRIPTION: Machine configuration for the TI AM69 SK
-
-require conf/machine/include/am69.inc
-
-TFA_K3_USART = "0x8"
-OPTEE_K3_USART = "0x8"
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-am69-sk \
-    ti/k3-fpdlink \
-    ti/k3-v3link \
-    ti/k3-am68-sk-v3link-fusion \
-    ti/k3-j721e-sk-csi2-dual-imx219 \
-    ti/k3-j721e-sk-fpdlink-fusion \
-"
-
-KERNEL_DEVICETREE = " \
-    ti/k3-am69-sk.dtb \
-    ti/k3-j721e-sk-csi2-dual-imx219.dtbo \
-"
-
-UBOOT_MACHINE = "am69_sk_a72_defconfig"

meta-ti-bsp/conf/machine/beagleplay-ti-k3r5.conf

@@ -1,11 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeaglePlay (R5F)
-#@DESCRIPTION: Machine configuration for the BeaglePlay (R5F core)
-
-require conf/machine/include/k3r5.inc
-
-SYSFW_SOC = "am62x"
-SYSFW_CONFIG = "evm"
-SYSFW_SUFFIX = "gp"
-
-UBOOT_MACHINE = "am62x_beagleplay_r5_defconfig"

meta-ti-bsp/conf/machine/beagleplay-ti.conf

@@ -1,43 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeaglePlay (A53)
-#@DESCRIPTION: Machine configuration for the BeaglePlay board (A53 core)
-
-require conf/machine/include/k3.inc
-require conf/machine/include/mc_k3r5.inc
-
-SOC_FAMILY:append = ":am62xx"
-
-MACHINE_FEATURES += "screen"
-
-SERIAL_CONSOLES = "115200;ttyS2"
-
-require conf/machine/include/mesa-pvr.inc
-PREFERRED_PROVIDER_virtual/gpudriver ?= "${BSP_ROGUE_DRIVER_PROVIDER}"
-
-TFA_BOARD = "lite"
-TFA_K3_SYSTEM_SUSPEND = "1"
-
-OPTEEMACHINE = "k3-am62x"
-
-UBOOT_MACHINE = "am62x_beagleplay_a53_defconfig"
-
-SPL_BINARY = "tispl.bin_unsigned"
-
-KERNEL_DEVICETREE_PREFIX = " \
-    ti/k3-am625-beagle \
-    ti/k3-am625-sk \
-    ti/k3-am62x-sk \
-"
-
-KERNEL_DEVICETREE = " \
-    ti/k3-am625-beagleplay-csi2-ov5640.dtbo \
-    ti/k3-am625-beagleplay-csi2-tevi-ov5640.dtbo \
-    ti/k3-am625-beagleplay.dtb \
-    ti/k3-am625-sk.dtb \
-    ti/k3-am62x-sk-csi2-imx219.dtbo \
-    ti/k3-am62x-sk-csi2-ov5640.dtbo \
-    ti/k3-am62x-sk-csi2-tevi-ov5640.dtbo \
-    ti/k3-am62x-sk-hdmi-audio.dtbo \
-"
-
-MACHINE_GUI_CLASS = "bigscreen"

meta-ti-bsp/conf/machine/dra7xx-evm.conf

@@ -1,47 +0,0 @@
-#@TYPE: Machine
-#@NAME: DRA7xx EVM
-#@DESCRIPTION: Machine configuration for the TI DRA7xx EVM
-
-require conf/machine/include/dra7xx.inc
-
-MACHINE_FEATURES += "touchscreen"
-
-SERIAL_CONSOLES = "115200;ttyS0"
-
-KERNEL_DEVICETREE_PREFIX = " \
-    dra7 \
-    ti/dra7 \
-    ti/lcd \
-    ti/omap/dra7 \
-"
-
-KERNEL_DEVICETREE = " \
-    ti/omap/dra7-evm.dtb \
-    ti/omap/dra71-evm.dtb \
-    ti/omap/dra72-evm.dtb \
-    ti/omap/dra72-evm-revc.dtb \
-    ti/omap/dra76-evm.dtb \
-"
-
-UBOOT_MACHINE = "dra7xx_evm_config"
-
-# UBI information.  Note that this is board and kernel specific.  Changes
-# in your kernel port may require changes in these variables.  For more
-# details about this board please see
-# http://processors.wiki.ti.com/index.php/UBIFS_Support
-
-# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
-# From dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: logical eraseblock size:    126976 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 1988 LEBs
-MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 8192"
-
-# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
-# from dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: physical eraseblock size:   131072 bytes (128 KiB)
-# UBI: sub-page size:              512
-# UBI: VID header offset:          2048 (aligned 2048)
-UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"

meta-ti-bsp/conf/machine/dra7xx-hs-evm.conf

@@ -1,24 +0,0 @@
-#@TYPE: Machine
-#@NAME: DRA7xx HS EVM
-#@DESCRIPTION: Machine configuration for the TI DRA7xx HS EVM
-
-require conf/machine/dra7xx-evm.conf
-
-UBOOT_MACHINE = "dra7xx_hs_evm_config"
-
-OPTEEMACHINE = "ti-dra7xx"
-OPTEEFLAVOR = "dra7xx"
-OPTEEPAGER = "y"
-
-EXTRA_IMAGEDEPENDS += "optee-os"
-
-# FIT image for legacy secure devices
-KERNEL_CLASSES += " kernel-fitimage-legacyhs"
-KERNEL_IMAGETYPES += " fitImage"
-
-# FIT image settings
-FITIMAGE_HASH_ALGO = ""
-FITIMAGE_PACK_TEE = "1"
-FITIMAGE_DTB_BY_NAME = "1"
-FITIMAGE_TEE_BY_NAME = "1"
-FITIMAGE_CONF_BY_NAME = "1"

meta-ti-bsp/conf/machine/include/am57xx.inc

@@ -1,7 +0,0 @@
-require conf/machine/include/omap-a15.inc
-SOC_FAMILY:append = ":dra7xx"
-SOC_FAMILY:append = ":am57xx"
-
-MACHINE_FEATURES += "pci"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "prueth-fw prusw-fw pruhsr-fw pruprp-fw"

meta-ti-bsp/conf/machine/include/am62axx.inc

@@ -1,13 +0,0 @@
-require conf/machine/include/k3.inc
-require conf/machine/include/mc_k3r5.inc
-
-SOC_FAMILY:append = ":am62axx"
-
-MACHINE_FEATURES += "screen touchscreen"
-
-TFA_K3_SYSTEM_SUSPEND = "1"
-
-TFA_BOARD = "lite"
-OPTEEMACHINE = "k3-am62x"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "cnm-wave-fw"

meta-ti-bsp/conf/machine/include/am62dxx.inc

@@ -1,9 +0,0 @@
-require conf/machine/include/k3.inc
-require conf/machine/include/mc_k3r5.inc
-
-SOC_FAMILY:append = ":am62dxx"
-
-TFA_K3_SYSTEM_SUSPEND = "1"
-
-TFA_BOARD = "lite"
-OPTEEMACHINE = "k3-am62x"

meta-ti-bsp/conf/machine/include/am62lxx.inc

@@ -1,9 +0,0 @@
-require conf/machine/include/k3.inc
-SOC_FAMILY:append = ":am62lxx"
-
-MACHINE_FEATURES += "screen"
-
-TFA_BOARD = "am62l"
-TFA_K3_SYSTEM_SUSPEND = "1"
-
-OPTEEMACHINE = "k3-am62lx"

meta-ti-bsp/conf/machine/include/am62pxx.inc

@@ -1,21 +0,0 @@
-require conf/machine/include/k3.inc
-require conf/machine/include/mc_k3r5.inc
-
-SOC_FAMILY:append = ":am62pxx"
-
-MACHINE_FEATURES += "screen"
-
-require conf/machine/include/mesa-pvr.inc
-PREFERRED_PROVIDER_virtual/gpudriver ?= "${BSP_ROGUE_DRIVER_PROVIDER}"
-
-TFA_BOARD = "lite"
-TFA_K3_SYSTEM_SUSPEND = "1"
-
-OPTEEMACHINE = "k3-am62x"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "cnm-wave-fw"
-
-SERIAL_CONSOLES = "115200;ttyS2"
-
-# Bitmap image tarball for early splashscreen
-IMAGE_BOOT_FILES += "ti_logo_414x97_32bpp.bmp.gz"

meta-ti-bsp/conf/machine/include/am62xx.inc

@@ -1,20 +0,0 @@
-require conf/machine/include/k3.inc
-require conf/machine/include/mc_k3r5.inc
-
-SOC_FAMILY:append = ":am62xx"
-
-MACHINE_FEATURES += "screen"
-
-require conf/machine/include/mesa-pvr.inc
-PREFERRED_PROVIDER_virtual/gpudriver ?= "${BSP_ROGUE_DRIVER_PROVIDER}"
-
-# Bitmap image tarball for early splashscreen
-IMAGE_BOOT_FILES += "ti_logo_414x97_32bpp.bmp.gz"
-
-TFA_BOARD = "lite"
-TFA_K3_SYSTEM_SUSPEND = "1"
-
-OPTEEMACHINE = "k3-am62x"
-
-# Normally AM62 boards use ttyS2, but our Jailhouse inmate may use ttyS3, so try both
-SERIAL_CONSOLES = "115200;ttyS2 115200;ttyS3"

meta-ti-bsp/conf/machine/include/am64xx.inc

@@ -1,33 +0,0 @@
-require conf/machine/include/k3.inc
-require conf/machine/include/mc_k3r5.inc
-
-SOC_FAMILY:append = ":am64xx"
-
-KERNEL_DEVICETREE_PREFIX = "ti/k3-am642"
-
-KERNEL_DEVICETREE_DTBMERGE = " \
-    ti/k3-am642-evm-nand.dtb \
-"
-
-KERNEL_DEVICETREE = " \
-    ti/k3-am642-evm-icssg1-dualemac-mii.dtbo \
-    ti/k3-am642-evm-icssg1-dualemac.dtbo \
-    ti/k3-am642-evm-nand.dtbo \
-    ti/k3-am642-evm.dtb \
-    ti/k3-am642-hummingboard-t-pcie.dtbo \
-    ti/k3-am642-hummingboard-t-usb3.dtbo \
-    ti/k3-am642-hummingboard-t.dtb \
-    ti/k3-am642-phyboard-electra-gpio-fan.dtbo \
-    ti/k3-am642-phyboard-electra-pcie-usb2.dtbo \
-    ti/k3-am642-phyboard-electra-rdk.dtb \
-    ti/k3-am642-sk.dtb \
-    ti/k3-am642-tqma64xxl-mbax4xxl.dtb \
-"
-
-TFA_BOARD = "lite"
-
-OPTEEMACHINE = "k3-am64x"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "prueth-fw pruhsr-fw prusw-fw"
-
-TI_WKS_BOOTLOADER_APPEND = "console=ttyS2,115200n8"

meta-ti-bsp/conf/machine/include/am65xx.inc

@@ -1,43 +0,0 @@
-require conf/machine/include/k3.inc
-require conf/machine/include/mc_k3r5.inc
-
-SOC_FAMILY:append = ":am65xx"
-
-MACHINE_FEATURES += "screen touchscreen"
-
-require conf/machine/include/mesa-pvr.inc
-PREFERRED_PROVIDER_virtual/gpudriver ?= "${BSP_SGX_DRIVER_PROVIDER}"
-
-KERNEL_DEVICETREE_PREFIX = "ti/k3-am654"
-
-KERNEL_DEVICETREE_DTBMERGE = " \
-    ti/k3-am654-gp-evm.dtb \
-    ti/k3-am654-evm.dtb \
-    ti/k3-am654-idk.dtb \
-    ti/k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtb \
-    ti/k3-am6548-iot2050-advanced-m2-bkey-usb3.dtb \
-"
-
-KERNEL_DEVICETREE = " \
-    ti/k3-am654-base-board-rocktech-rk101-panel.dtbo \
-    ti/k3-am654-base-board.dtb \
-    ti/k3-am654-icssg2.dtbo \
-    ti/k3-am654-idk.dtbo \
-    ti/k3-am654-pcie-usb2.dtbo \
-    ti/k3-am654-pcie-usb3.dtbo \
-    ti/k3-am6548-iot2050-advanced-m2-bkey-ekey-pcie.dtbo \
-    ti/k3-am6548-iot2050-advanced-m2-bkey-usb3.dtbo \
-    ti/k3-am6548-iot2050-advanced-m2.dtb \
-    ti/k3-am6548-iot2050-advanced-pg2.dtb \
-    ti/k3-am6548-iot2050-advanced-sm.dtb \
-    ti/k3-am6548-iot2050-advanced.dtb \
-"
-
-# Deploy SYSFW and any variants
-IMAGE_BOOT_FILES += "sysfw.itb sysfw-*-evm.itb"
-
-TFA_BOARD = "generic"
-
-OPTEEMACHINE = "k3-am65x"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "prueth-fw"

meta-ti-bsp/conf/machine/include/am68.inc

@@ -1,15 +0,0 @@
-require conf/machine/include/k3.inc
-require conf/machine/include/mc_k3r5.inc
-
-SOC_FAMILY:append = ":j721s2"
-
-MACHINE_FEATURES += "screen"
-
-require conf/machine/include/mesa-pvr.inc
-PREFERRED_PROVIDER_virtual/gpudriver ?= "${BSP_ROGUE_DRIVER_PROVIDER}"
-
-TFA_BOARD = "generic"
-
-OPTEEMACHINE = "k3-j784s4"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "cadence-mhdp-fw cnm-wave-fw"