libdrm: restore libdrm-tests package that got missed with TI version

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

README

@@ -8,7 +8,13 @@ This layer depends on:
 
 URI: git://git.openembedded.org/openembedded-core
 layers: meta
-branch: rocko
+branch: master
+
+
+When not depending on meta-openembedded and not using systemd, you may need to
+mask few miscellaneous recipes requiring systemd, by adding this to local.conf:
+
+BBMASK = "meta-ti/recipes-misc"
 
 
 The base BSP part of meta-ti should work with different OpenEmbedded/Yocto
@@ -19,7 +25,6 @@ Please follow the recommended setup procedures of your OE distribution.
 
 
 Send pull requests, patches, comments or questions to meta-ti@yoctoproject.org
-Please note - meta-ti mailing list requires subscription for posting:
-https://lists.yoctoproject.org/listinfo/meta-ti
 
 Maintainers: Denys Dmytriyenko <denys@ti.com>
+             Koen Kooi <koen@dominion.thruhere.net>

classes/sdcard_image.bbclass

@@ -0,0 +1,156 @@
+inherit image
+
+# Add the fstypes we need
+IMAGE_FSTYPES_append = " tar.bz2 sdimg"
+
+# Ensure required utilities are present
+IMAGE_DEPENDS_sdimg = "genext2fs-native e2fsprogs-native"
+
+# Change this to match your host distro
+LOSETUP ?= "/sbin/losetup"
+
+# Since these need to go in /etc/fstab we can hardcode them
+# Since the vars are weakly assigned, you can override them from your local.conf
+LOOPDEV ?= "/dev/loop1"
+LOOPDEV_BOOT ?= "/dev/loop2"
+LOOPDEV_FS ?= "/dev/loop3"
+
+# Default to 4GiB images
+SDIMG_SIZE ?= "444" 
+
+# FS type for rootfs
+ROOTFSTYPE ?= "ext4"
+
+BOOTPARTNAME_beaglebone = "BEAGLE_BONE"
+BOOTPARTNAME ?= "${MACHINE}"
+
+IMAGEDATESTAMP = "${@time.strftime('%Y.%m.%d',time.gmtime())}"
+
+# Files and/or directories to be copied into the vfat partition
+FATPAYLOAD ?= ""
+
+IMAGE_CMD_sdimg () {
+	SDIMG=${WORKDIR}/sd.img
+
+	# sanity check fstab entry for boot partition mounting
+	if [ "x$(cat /etc/fstab | grep ${LOOPDEV_BOOT} | grep ${WORKDIR}/tmp-mnt-boot | grep user || true)" = "x" ]; then
+		echo "/etc/fstab entries need to be created with the user flag for the loop devices like:"
+		echo "${LOOPDEV_BOOT} ${WORKDIR}/tmp-mnt-boot vfat user 0 0"
+        false
+	fi
+
+	# cleanup loops
+	for loop in ${LOOPDEV} ${LOOPDEV_BOOT} ${LOOPDEV_FS} ; do
+		${LOSETUP} -d $loop || true
+	done
+
+	# If an SD image is already present, reuse and reformat it
+	if [ ! -e ${SDIMG} ] ; then
+		dd if=/dev/zero of=${SDIMG} bs=$(echo '255 * 63 * 512' | bc) count=${SDIMG_SIZE}
+	fi
+
+	${LOSETUP} ${LOOPDEV} ${SDIMG}
+
+	# Create partition table
+	dd if=/dev/zero of=${LOOPDEV} bs=1024 count=1024
+	SIZE=$(/sbin/fdisk -l ${LOOPDEV} | grep Disk | grep bytes | awk '{print $5}')
+	CYLINDERS=$(echo $SIZE/255/63/512 | bc)
+	{
+	echo ,9,0x0C,*
+	echo ,,,-
+	} | /sbin/sfdisk -D -H 255 -S 63 -C ${CYLINDERS} ${LOOPDEV}
+
+	# Prepare loop devices for boot and filesystem partitions
+	BOOT_OFFSET=32256
+	FS_OFFSET_SECT=$(/sbin/fdisk -l -u ${LOOPDEV} 2>&1 | grep Linux | perl -p -i -e "s/\s+/ /"|cut -d " " -f 2)
+	FS_OFFSET=$(echo "$FS_OFFSET_SECT * 512" | bc)
+	FS_SIZE_BLOCKS=$(/sbin/fdisk -l -u ${LOOPDEV} 2>&1 | grep Linux | perl -p -i -e "s/\s+/ /g" \ 
+	|cut -d " " -f 4 | cut -d "+" -f 1)
+ 
+	LOOPDEV_BLOCKS=$(/sbin/fdisk -l -u ${LOOPDEV} 2>&1 | grep FAT | perl -p -i -e "s/\s+/ /g"|cut -d " " -f 5)
+	LOOPDEV_BYTES=$(echo "$LOOPDEV_BLOCKS * 1024" | bc)
+
+	${LOSETUP} -d ${LOOPDEV}
+
+	${LOSETUP} ${LOOPDEV_BOOT} ${SDIMG} -o ${BOOT_OFFSET} 
+
+	/sbin/mkfs.vfat ${LOOPDEV_BOOT} -n ${BOOTPARTNAME} $LOOPDEV_BLOCKS
+
+	# Prepare filesystem partition
+	# Copy ubi used by flashing scripts
+	if [ -e  ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ] ; then
+		echo "Copying UBIFS image to file system"
+		cp ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ubi ${IMAGE_ROOTFS}/boot/fs.ubi
+	fi
+
+	# Prepare boot partion. First mount the boot partition, and copy the boot loader and supporting files
+	# from the root filesystem
+
+	mkdir -p ${WORKDIR}/tmp-mnt-boot
+	mount $LOOPDEV_BOOT ${WORKDIR}/tmp-mnt-boot
+
+	echo "Copying bootloaders into the boot partition"
+	if [ -e ${IMAGE_ROOTFS}/boot/MLO ] ; then
+		cp -v ${IMAGE_ROOTFS}/boot/MLO ${WORKDIR}/tmp-mnt-boot 
+	else
+		cp -v ${DEPLOY_DIR_IMAGE}/MLO ${WORKDIR}/tmp-mnt-boot
+	fi
+
+	# Check for u-boot SPL
+	if [ -e ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.img ] ; then
+		suffix=img
+	else
+		suffix=bin
+	fi
+
+	cp -v ${IMAGE_ROOTFS}/boot/uEnv.txt ${WORKDIR}/tmp-mnt-boot || true
+	cp -v ${IMAGE_ROOTFS}/boot/user.txt ${WORKDIR}/tmp-mnt-boot || true
+	cp -v ${IMAGE_ROOTFS}/boot/uImage ${WORKDIR}/tmp-mnt-boot || true
+
+	if [ -e ${IMAGE_ROOTFS}/boot/u-boot.$suffix ] ; then
+		cp -v ${IMAGE_ROOTFS}/boot/{u-boot.$suffix} ${WORKDIR}/tmp-mnt-boot || true
+	else
+		cp -v ${DEPLOY_DIR_IMAGE}/u-boot-${MACHINE}.$suffix ${WORKDIR}/tmp-mnt-boot/u-boot.$suffix 
+	fi
+
+	if [ -n ${FATPAYLOAD} ] ; then
+		echo "Copying payload into VFAT"
+		for entry in ${FATPAYLOAD} ; do
+				# add the || true to stop aborting on vfat issues like not supporting .~lock files
+				cp -av ${IMAGE_ROOTFS}$entry ${WORKDIR}/tmp-mnt-boot || true
+		done
+	fi
+
+	echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${IMAGE_ROOTFS}/etc/image-version-info
+
+	# Cleanup VFAT mount
+	echo "Cleaning up VFAT mount"
+	umount ${WORKDIR}/tmp-mnt-boot
+	${LOSETUP} -d ${LOOPDEV_BOOT} || true
+
+	# Prepare rootfs parition
+	echo "Creating rootfs loopback"
+	${LOSETUP} ${LOOPDEV_FS} ${SDIMG} -o ${FS_OFFSET}
+
+	FS_NUM_INODES=$(echo $FS_SIZE_BLOCKS / 4 | bc)
+
+	case "${ROOTFSTYPE}" in
+		ext3)
+				genext2fs -z -N $FS_NUM_INODES -b $FS_SIZE_BLOCKS -d ${IMAGE_ROOTFS} ${LOOPDEV_FS}
+				tune2fs -L ${IMAGE_NAME} -j ${LOOPDEV_FS}
+				;;
+		ext4)
+				genext2fs -z -N $FS_NUM_INODES -b $FS_SIZE_BLOCKS -d ${IMAGE_ROOTFS} ${LOOPDEV_FS}
+				tune2fs -L ${IMAGE_NAME} -j -O extents,uninit_bg,dir_index ${LOOPDEV_FS}
+				;;
+		*)
+				echo "Please set ROOTFSTYPE to something supported"
+				exit 1
+				;;
+	esac
+
+	${LOSETUP} -d ${LOOPDEV_FS} || true
+
+	gzip -c ${WORKDIR}/sd.img > ${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}-${IMAGEDATESTAMP}.img.gz
+	rm -f ${WORKDIR}/sd.img
+}

classes/ti-pdk.bbclass

@@ -1,141 +0,0 @@
-require recipes-ti/includes/ti-paths.inc
-require recipes-ti/includes/ti-staging.inc
-
-inherit perlnative
-
-DEPENDS = "ti-xdctools-native ti-cg-xml-native ti-sysbios common-csl-ip-rtos libxml-simple-perl-native gcc-arm-none-eabi-native ti-cgt6x-native ti-cgt-pru-native ti-pdk-build-rtos doxygen-native"
-
-DEPENDS_append_omap-a15 = " ti-cgt-arm-native"
-DEPENDS_remove_ti33x = "ti-cgt6x-native"
-DEPENDS_remove_ti43x = "ti-cgt6x-native"
-DEPENDS_append_omapl1 = " ti-cgt-arm-native"
-DEPENDS_remove_k3 = "gcc-arm-none-eabi-native ti-cgt6x-native"
-DEPENDS_append_k3 = " ti-cgt-arm-native gcc-linaro-baremetal-aarch64-native"
-
-S = "${WORKDIR}/git"
-B = "${WORKDIR}/build"
-
-# HTML hyperlink text
-PDK_COMP_LINK_TEXT ?= ""
-
-DOC_FILE = "API_Documentation_${PN}.html"
-
-create_doc_link () {
-    PDK_COMP_DIR=`get_build_dir_bash`
-
-    echo "<a href=\"${PDK_COMP_DIR}/docs/doxygen/html/index.html\">${PDK_COMP_LINK_TEXT}</a>" >> ${D}${PDK_INSTALL_DIR_RECIPE}/packages/.extras/doc/${DOC_FILE}
-}
-
-get_build_dir_bash() {
-  if [ -f ${S}/package.xdc ]
-  then
-    grep '^package' ${S}/package.xdc | sed -e 's|\[.*$||' | awk '{ print $2 }' | sed -e 's|\.|/|g'
-  else
-    echo ${S}
-    return 1
-  fi
-}
-
-export CROSS_TOOL_PRFX="arm-none-eabi-"
-export TOOLCHAIN_PATH_A8 = "${GCC_ARM_NONE_TOOLCHAIN}"
-export TOOLCHAIN_PATH_A9 = "${GCC_ARM_NONE_TOOLCHAIN}"
-export TOOLCHAIN_PATH_A15 = "${GCC_ARM_NONE_TOOLCHAIN}"
-export TOOLCHAIN_PATH_M4 = "${M4_TOOLCHAIN_INSTALL_DIR}"
-export TOOLCHAIN_PATH_Arm9 = "${M4_TOOLCHAIN_INSTALL_DIR}"
-export C6X_GEN_INSTALL_PATH = "${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x"
-export TOOLCHAIN_PATH_EVE = "${STAGING_DIR_NATIVE}/usr/share/ti/cgt-arp32"
-export CL_PRU_INSTALL_PATH = "${TI_CGT_PRU_INSTALL_DIR}"
-export TOOLCHAIN_PATH_GCC_ARCH64 = "${GCC_LINARO_BAREMETAL_AARCH64_TOOLCHAIN}"
-export TOOLCHAIN_PATH_R5 = "${M4_TOOLCHAIN_INSTALL_DIR}"
-
-export ROOTDIR = "${B}"
-export BIOS_INSTALL_PATH = "${SYSBIOS_INSTALL_DIR}"
-export XDC_INSTALL_PATH = "${XDC_INSTALL_DIR}"
-export PDK_INSTALL_PATH = "${PDK_INSTALL_DIR}/packages"
-
-export XDCPATH = "${XDC_INSTALL_DIR}/packages;${SYSBIOS_INSTALL_DIR}/packages;${PDK_INSTALL_DIR}/packages"
-export SECTTI="perl ${CG_XML_INSTALL_DIR}/ofd/sectti.pl"
-
-TI_PDK_XDCMAKE ?= "1"
-
-# By default, only build the cores with available toolchains
-TI_PDK_LIMIT_CORES ?= "a15_0 ipu1_0 ipu1_1 ipu2_0 ipu2_1 c66x c66xdsp_1 c66xdsp_2 arm9_0 c674x a9host a8host pru_0 pru_1"
-TI_PDK_LIMIT_SOCS ?= ""
-TI_PDK_LIMIT_BOARDS ?= ""
-TI_PDK_MAKE_TARGET ?= "release"
-TI_PDK_EXTRA_MAKE ?= ""
-TI_PDK_DOXYGEN_SUPPORT ?= "1"
-
-TI_PDK_XDC_ARGS ?= "${TI_PDK_LIMIT_SOCS}"
-
-PARALLEL_XDC = "--jobs=${BB_NUMBER_THREADS}"
-PARALLEL_MAKE = ""
-
-def get_doxygen_support(d):
-    if d.getVar('TI_PDK_DOXYGEN_SUPPORT') == '1':
-        return ''
-    return 'DOXYGEN_SUPPORT=no'
-
-EXTRA_OEMAKE = " \
-    LIMIT_SOCS="${TI_PDK_LIMIT_SOCS}" \
-    LIMIT_BOARDS="${TI_PDK_LIMIT_BOARDS}" \
-    LIMIT_CORES="${TI_PDK_LIMIT_CORES}" \
-    ${TI_PDK_EXTRA_MAKE} \
-    ${@get_doxygen_support(d)} \
-"
-
-do_configure() {
-    BUILD_DIR=${B}/`get_build_dir_bash`
-
-    mkdir -p ${BUILD_DIR}
-    cp -r ${S}/* ${BUILD_DIR}
-
-    if [ "${TI_PDK_XDCMAKE}" == "1" ]
-    then
-        cd ${BUILD_DIR}
-
-        sed -i "s/\ \"\.\\\\\\\\\"\ +//" src/Module.xs
-        find -name "*.xs" -exec sed -i "s/ofd6x\.exe/ofd6x/" {} \;
-        find -name "*.xs" -exec sed -i "s/sectti\.exe/sectti/" {} \;
-        find -name "*.xs" -exec sed -i "/\.chm/d" {} \;
-        find -name "*.xs" -exec sed -i "s/pasm\_dos/pasm\_linux/" {} \;
-
-        cd ${B}
-        ${XDC_INSTALL_DIR}/xdc clean ${PARALLEL_XDC} -PR .
-    else
-        if [ "${CLEANBROKEN}" != "1" ]
-        then
-            cd ${BUILD_DIR}
-            oe_runmake clean
-            cd "${B}"
-        fi
-    fi
-
-}
-
-do_compile() {
-
-    if [ "${TI_PDK_XDCMAKE}" == "1" ]
-    then
-        ${XDC_INSTALL_DIR}/xdc all ${PARALLEL_XDC} XDCARGS="${TI_PDK_XDC_ARGS}" ROOTDIR="${ROOTDIR}" -PR .
-        ${XDC_INSTALL_DIR}/xdc release XDCARGS="${TI_PDK_XDC_ARGS}" -PR .
-    else
-        BUILD_DIR=${B}/`get_build_dir_bash`
-        cd ${BUILD_DIR}
-
-        oe_runmake ${TI_PDK_MAKE_TARGET}
-    fi
-}
-
-do_install () {
-    install -d ${D}${PDK_INSTALL_DIR_RECIPE}/packages
-    find -name "*.tar" -exec tar xf {} --no-same-owner -C ${D}${PDK_INSTALL_DIR_RECIPE}/packages \;
-    
-    if [ "${PDK_COMP_LINK_TEXT}" != "" ]
-    then
-        install -d ${D}${PDK_INSTALL_DIR_RECIPE}/packages/.extras/doc
-        create_doc_link
-    fi
-}
-
-FILES_${PN} += "${PDK_INSTALL_DIR_RECIPE}/packages"

conf/layer.conf

@@ -7,25 +7,3 @@ BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
 BBFILE_COLLECTIONS += "meta-ti"
 BBFILE_PATTERN_meta-ti := "^${LAYERDIR}/"
 BBFILE_PRIORITY_meta-ti = "6"
-
-LICENSE_PATH += "${LAYERDIR}/licenses"
-
-LAYERDEPENDS_meta-ti = "core"
-
-SIGGEN_EXCLUDERECIPES_ABISAFE += " \
-    ti-sgx-ddk-km \
-    ti-sgx-ddk-um \
-    ti-ipc \
-    ti-ipc-rtos \
-    cmem-mod \
-    hplib-mod \
-    gdbserverproxy-module-drv \
-    debugss-module-drv \
-    uio-module-drv \
-    mpm-transport \
-    cppi-lld \
-    qmss-lld \
-    multiprocmgr \
-"
-
-HOSTTOOLS_NONFATAL += "truncate xxd comm"

conf/machine/am180x-evm.conf

@@ -0,0 +1,18 @@
+#@TYPE: Machine
+#@NAME: AM180x CPUs on an AM180x EVM board
+#@DESCRIPTION: Machine configuration for the TI AM180x EVM board
+
+require conf/machine/include/davinci.inc
+require conf/machine/include/omapl138.inc
+
+UBOOT_MACHINE = "da850evm_config"
+UBOOT_ENTRYPOINT = "0xc0008000"
+UBOOT_LOADADDRESS = "0xc0008000"
+
+IMAGE_FSTYPES += "tar.gz ubi"
+
+SERIAL_CONSOLE = "115200 ttyS2"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-omapl138-psp"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am180x"
+PREFERRED_PROVIDER_u-boot = "u-boot-am180x"

conf/machine/am335x-evm.conf

@@ -4,15 +4,14 @@
 
 require conf/machine/include/ti33x.inc
 
-MACHINE_GUI_CLASS = "smallscreen"
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
 MACHINE_FEATURES += "touchscreen"
 
-IMAGE_FSTYPES += "ubifs ubi tar.xz"
+IMAGE_FSTYPES += "ubi tar.gz"
 
-# Normally AM335 boards use ttyS0, but ICE uses ttyS3, so try both
-SERIAL_CONSOLE = ""
-SERIAL_CONSOLES = "115200;ttyS0 115200;ttyS3"
-SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
+SERIAL_CONSOLE = "115200 ttyO0"
 
 # UBI information.  Note that this is board and kernel specific.  Changes
 # in your kernel port may require changes in these variables.  For more
@@ -25,7 +24,7 @@ SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}"
 # UBI: logical eraseblock size:    126976 bytes
 # from ubiattach stdout:
 # UBI device number 0, total 1988 LEBs
-MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 8300"
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3836"
 
 # do ubiattach /dev/ubi_ctrl -m 7 -O 2048
 # from dmesg:

conf/machine/am335x-hs-evm.conf

@@ -1,18 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM335x HS EVM
-#@DESCRIPTION: Machine configuration for the TI AM435x HS EVM
-
-require conf/machine/am335x-evm.conf
-
-UBOOT_MACHINE = ""
-# Last config in the list is default
-UBOOT_CONFIG ??= "uart mmc"
-UBOOT_CONFIG[uart] = "am335x_hs_evm_uart_config"
-UBOOT_CONFIG[mmc] = "am335x_hs_evm_config"
-
-UBOOT_ENTRYPOINT = "0x82000000"
-UBOOT_LOADADDRESS = "0x82000000"
-UBOOT_RD_LOADADDRESS = "0x84000000"
-UBOOT_RD_ENTRYPOINT = "0x84000000"
-
-TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/am3x"

conf/machine/am3517-evm.conf

@@ -4,16 +4,21 @@
 
 require conf/machine/include/omap3.inc
 
-MACHINE_GUI_CLASS = "smallscreen"
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
 MACHINE_FEATURES += "touchscreen ethernet"
 
 IMAGE_FSTYPES += "ubi tar.gz"
 EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 
-SERIAL_CONSOLE = "115200 ttyS2"
+SERIAL_CONSOLE = "115200 ttyO2"
 USE_VT = "2"
 
-KERNEL_DEVICETREE = "am3517-evm.dtb"
+PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
+
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am3517"
+PREFERRED_PROVIDER_u-boot = "u-boot-am3517"
 
 UBOOT_MACHINE = "am3517_evm_config"
 XLOAD_MACHINE = "am3517evm_config"

conf/machine/am37x-evm.conf

@@ -4,15 +4,19 @@
 
 require conf/machine/include/omap3.inc
 
-MACHINE_GUI_CLASS = "smallscreen"
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
 MACHINE_FEATURES += "touchscreen ethernet"
 
 IMAGE_FSTYPES += "ubi tar.gz"
 EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 
-KERNEL_DEVICETREE = "omap3-evm-37xx.dtb"
+SERIAL_CONSOLE = "115200 ttyO0"
 
-SERIAL_CONSOLE = "115200 ttyS0"
+PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am37x"
+PREFERRED_PROVIDER_u-boot = "u-boot-am37x"
 
 # NOTE: there are NAND and OneNAND versions of this board...
 # do ubiattach /dev/ubi_ctrl -m 4

conf/machine/am437x-evm.conf

@@ -1,33 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM437x EVM
-#@DESCRIPTION: Machine configuration for the TI AM437x EVM
-
-require conf/machine/include/ti43x.inc
-
-MACHINE_GUI_CLASS = "smallscreen"
-MACHINE_FEATURES += "touchscreen"
-
-IMAGE_FSTYPES += "ubifs ubi tar.xz"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-# UBI information.  Note that this is board and kernel specific.  Changes
-# in your kernel port may require changes in these variables.  For more
-# details about this board please see
-# http://processors.wiki.ti.com/index.php/UBIFS_Support
-
-# do ubiattach /dev/ubi_ctrl -m 11 -O 4096
-# From dmesg:
-# UBI: smallest flash I/O unit:    4096
-# UBI: logical eraseblock size:    253952 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 994 LEBs
-MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 4000"
-
-# do ubiattach /dev/ubi_ctrl -m 11 -O 4096
-# from dmesg:
-# UBI: smallest flash I/O unit:    4096
-# UBI: physical eraseblock size:   262144 bytes (256 KiB)
-# UBI: sub-page size:              4096
-# UBI: VID header offset:          4096 (aligned 4096)
-UBINIZE_ARGS = "-m 4096 -p 256KiB -s 4096 -O 4096"

conf/machine/am437x-hs-evm.conf

@@ -1,18 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM437x HS EVM
-#@DESCRIPTION: Machine configuration for the TI AM437x HS EVM
-
-require conf/machine/am437x-evm.conf
-
-UBOOT_MACHINE = "am43xx_hs_evm_config"
-
-UBOOT_ENTRYPOINT = "0x82000000"
-UBOOT_LOADADDRESS = "0x82000000"
-UBOOT_RD_LOADADDRESS = "0x84000000"
-UBOOT_RD_ENTRYPOINT = "0x84000000"
-
-TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/am4x"
-
-OPTEEMACHINE = "ti"
-OPTEEFLAVOR = "am43xx"
-OPTEEOUTPUTMACHINE = "ti"

conf/machine/am57xx-evm.conf

@@ -1,47 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM57xx EVM
-#@DESCRIPTION: Machine configuration for the TI AM57xx EVM
-
-require conf/machine/include/dra7xx.inc
-
-MACHINE_FEATURES += "touchscreen"
-
-IMAGE_FSTYPES += "tar.xz"
-
-SERIAL_CONSOLE = "115200 ttyS2"
-
-KERNEL_DEVICETREE = "am57xx-beagle-x15.dtb am57xx-beagle-x15-revb1.dtb am57xx-beagle-x15-revc.dtb \
-                    am57xx-evm.dtb am57xx-evm-cam-mt9t111.dtb am57xx-evm-cam-ov10635.dtb \
-                    am57xx-evm-reva3.dtb am57xx-evm-reva3-cam-mt9t111.dtb am57xx-evm-reva3-cam-ov10635.dtb \
-                    am571x-idk.dtb am571x-idk-lcd-osd101t2045.dtb am571x-idk-lcd-osd101t2587.dtb \
-                    am572x-idk.dtb am572x-idk-lcd-osd101t2045.dtb am572x-idk-lcd-osd101t2587.dtb \
-                    am574x-idk.dtb am574x-idk-lcd-osd101t2587.dtb"
-
-KERNEL_DEVICETREE += "${@base_conditional('ENABLE_TI_UIO_DEVICES', '1', 'am574x-idk-pru-excl-uio.dtb am572x-idk-pru-excl-uio.dtb am571x-idk-pru-excl-uio.dtb', '', d)}"
-
-UBOOT_MACHINE = "am57xx_evm_config"
-
-# UBI information.  Note that this is board and kernel specific.  Changes
-# in your kernel port may require changes in these variables.  For more
-# details about this board please see
-# http://processors.wiki.ti.com/index.php/UBIFS_Support
-
-# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
-# From dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: logical eraseblock size:    126976 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 1988 LEBs
-MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 8192"
-
-# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
-# from dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: physical eraseblock size:   131072 bytes (128 KiB)
-# UBI: sub-page size:              512
-# UBI: VID header offset:          2048 (aligned 2048)
-UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
-
-# Set the list of device targets for ti-pdk class recipes
-TI_PDK_LIMIT_SOCS = "am571x am572x am574x"
-TI_PDK_LIMIT_BOARDS = "evmAM571x evmAM572x idkAM571x idkAM572x idkAM574x"

conf/machine/am57xx-hs-evm.conf

@@ -1,19 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM57xx HS EVM
-#@DESCRIPTION: Machine configuration for the TI AM57xx HS EVM
-
-require conf/machine/am57xx-evm.conf
-
-UBOOT_MACHINE = "am57xx_hs_evm_config"
-
-UBOOT_ENTRYPOINT = "0x82000000"
-UBOOT_LOADADDRESS = "0x82000000"
-UBOOT_RD_LOADADDRESS = "0x84000000"
-UBOOT_RD_ENTRYPOINT = "0x84000000"
-
-TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_AUTO}/am5x"
-
-OPTEEMACHINE = "ti"
-OPTEEFLAVOR = "am57xx"
-OPTEEOUTPUTMACHINE = "ti"
-OPTEEPAGER = "y"

conf/machine/am65xx-evm.conf

@@ -1,33 +0,0 @@
-#@TYPE: Machine
-#@NAME: AM65xx EVM
-#@DESCRIPTION: Machine configuration for the TI AM65xx EVM
-
-require conf/machine/include/k3.inc
-
-MACHINE_FEATURES += "touchscreen"
-
-IMAGE_FSTYPES += "tar.xz cpio cpio.xz wic.xz"
-
-SERIAL_CONSOLE = "115200 ttyS2"
-
-KERNEL_DEVICETREE = " \
-    ti/k3-am654-base-board.dtb \
-    ti/k3-am654-evm-csi2-ov490.dtbo ti/k3-am654-evm-oldi-lcd1evm.dtbo \
-    ti/k3-am654-gp.dtbo ti/k3-am654-idk.dtbo \
-    ti/k3-am654-pcie-usb2.dtbo ti/k3-am654-pcie-usb3.dtbo"
-
-UBOOT_MACHINE = "am65x_evm_a53_defconfig"
-
-OPTEEMACHINE = "k3"
-OPTEEFLAVOR = "am65x"
-OPTEEOUTPUTMACHINE = "k3"
-
-WKS_FILE = "sdimage-bootpart.wks"
-IMAGE_BOOT_FILES = "u-boot.img"
-
-do_image_wic[depends] += "mtools-native:do_populate_sysroot dosfstools-native:do_populate_sysroot"
-
-# Set the list of device targets for ti-pdk class recipes
-TI_PDK_LIMIT_SOCS = "am65xx"
-TI_PDK_LIMIT_BOARDS = "am65xx_evm am65xx_idk"
-TI_PDK_LIMIT_CORES = "mcu1_0 mpu1_0"

conf/machine/beagle-x15.conf

@@ -1,40 +0,0 @@
-#@TYPE: Machine
-#@NAME: BeagleBoard X15
-#@DESCRIPTION: Machine configuration for the BeagleBoard X15
-
-require conf/machine/include/dra7xx.inc
-
-KERNEL_DEVICETREE = "am57xx-beagle-x15.dtb am57xx-beagle-x15-revb1.dtb am57xx-beagle-x15-revc.dtb"
-
-MACHINE_GUI_CLASS = "bigscreen"
-
-SERIAL_CONSOLE = "115200 ttyS2"
-
-UBOOT_MACHINE = "am57xx_evm_config"
-
-WKS_FILE = "sdimage-bootpart.wks"
-IMAGE_BOOT_FILES = "MLO u-boot.img"
-IMAGE_FSTYPES += "tar.xz wic.xz"
-
-do_image_wic[depends] += "mtools-native:do_populate_sysroot dosfstools-native:do_populate_sysroot"
-
-# UBI information.  Note that this is board and kernel specific.  Changes
-# in your kernel port may require changes in these variables.  For more
-# details about this board please see
-# http://processors.wiki.ti.com/index.php/UBIFS_Support
-
-# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
-# From dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: logical eraseblock size:    126976 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 1988 LEBs
-MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 8192"
-
-# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
-# from dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: physical eraseblock size:   131072 bytes (128 KiB)
-# UBI: sub-page size:              512
-# UBI: VID header offset:          2048 (aligned 2048)
-UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"

conf/machine/beagleboard.conf

@@ -5,14 +5,16 @@
 require conf/machine/include/omap3.inc
 
 # Only has DVI connector for external screen
-MACHINE_GUI_CLASS = "bigscreen"
+GUI_MACHINE_CLASS = "bigscreen"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-mainline"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-beagleboard"
+PREFERRED_PROVIDER_u-boot = "u-boot-beagleboard"
 
 IMAGE_FSTYPES += "tar.gz ubi"
 EXTRA_IMAGECMD_jffs2 = "-lnp"
 
-KERNEL_DEVICETREE = "omap3-beagle.dtb omap3-beagle-xm.dtb omap3-beagle-xm-ab.dtb"
-
-SERIAL_CONSOLE = "115200 ttyS2"
+SERIAL_CONSOLE = "115200 ttyO2"
 
 UBOOT_MACHINE = "omap3_beagle_config"
 

conf/machine/beaglebone.conf

@@ -3,24 +3,12 @@
 #@DESCRIPTION: Machine configuration for the http://beagleboard.org/bone board 
 
 require conf/machine/include/ti33x.inc
-require conf/machine/include/beaglebone.inc
-
-KERNEL_DEVICETREE = "am335x-bone.dtb am335x-boneblue.dtb \
-                    am335x-boneblack.dtb am335x-boneblack-wireless.dtb \
-                    am335x-bonegreen.dtb am335x-bonegreen-wireless.dtb"
 
 # Only has DVI connector for external screen
-MACHINE_GUI_CLASS = "bigscreen"
+GUI_MACHINE_CLASS = "bigscreen"
 
-SERIAL_CONSOLE = "115200 ttyS0"
+IMAGE_FSTYPES += "tar.gz"
 
-UBOOT_MACHINE = "am335x_boneblack_config"
+SERIAL_CONSOLE = "115200 ttyO0"
 
-WKS_FILE = "sdimage-bootpart.wks"
-IMAGE_BOOT_FILES = "MLO u-boot.img"
-IMAGE_FSTYPES += "tar.xz wic.xz"
-
-do_image_wic[depends] += "mtools-native:do_populate_sysroot dosfstools-native:do_populate_sysroot"
-
-# Refine the list of device targets for ti-pdk class recipes
-TI_PDK_LIMIT_BOARDS = "bbbAM335x"
+UBOOT_MACHINE = "am335x_evm_config"

conf/machine/c665x-evm.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: Keystone 1 c665x machine
-#@DESCRIPTION: Machine configuration for the TI Keystone 1 c665x EVM
-
-require conf/machine/include/c66x.inc
-
-# Set the list of device targets for ti-pdk class recipes
-TI_PDK_LIMIT_SOCS = "c6657"
-TI_PDK_LIMIT_BOARDS = "evmC6657"

conf/machine/c667x-evm.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: Keystone 1 c667x machine
-#@DESCRIPTION: Machine configuration for the TI Keystone 1 c667x EVM
-
-require conf/machine/include/c66x.inc
-
-# Set the list of device targets for ti-pdk class recipes
-TI_PDK_LIMIT_SOCS = "c6678"
-TI_PDK_LIMIT_BOARDS = "evmC6678"

conf/machine/dra7xx-evm.conf

@@ -2,19 +2,14 @@
 #@NAME: DRA7xx EVM
 #@DESCRIPTION: Machine configuration for the TI DRA7xx EVM
 
-require conf/machine/include/dra7xx.inc
+require conf/machine/include/omap-a15.inc
 
-MACHINE_FEATURES += "touchscreen"
+IMAGE_FSTYPES += "ubi tar.gz"
 
-IMAGE_FSTYPES += "tar.xz"
+SERIAL_CONSOLE = "115200 ttyO0"
 
-SERIAL_CONSOLE = "115200 ttyS0"
-
-KERNEL_DEVICETREE = "dra7-evm.dtb dra7-evm-lcd-osd101t2045.dtb dra7-evm-lcd-osd101t2587.dtb \
-                    dra72-evm.dtb dra72-evm-lcd-osd101t2045.dtb dra72-evm-lcd-osd101t2587.dtb \
-                    dra72-evm-revc.dtb dra72-evm-revc-lcd-osd101t2045.dtb dra72-evm-revc-lcd-osd101t2587.dtb \
-                    dra71-evm.dtb dra71-evm-nand.dtb dra71-evm-lcd-auo-g101evn01.0.dtb dra71-lcard.dtb \
-                    dra76-evm.dtb dra76-evm-tfp410.dtb"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-dra7xx"
+PREFERRED_PROVIDER_u-boot = "u-boot-dra7xx"
 
 UBOOT_MACHINE = "dra7xx_evm_config"
 
@@ -29,7 +24,7 @@ UBOOT_MACHINE = "dra7xx_evm_config"
 # UBI: logical eraseblock size:    126976 bytes
 # from ubiattach stdout:
 # UBI device number 0, total 1988 LEBs
-MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 8192"
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3836"
 
 # do ubiattach /dev/ubi_ctrl -m 7 -O 2048
 # from dmesg:
@@ -39,6 +34,6 @@ MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 8192"
 # UBI: VID header offset:          2048 (aligned 2048)
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
 
-# Set the list of device targets for ti-pdk class recipes
-TI_PDK_LIMIT_BOARDS = "evmDRA72x evmDRA75x evmDRA78x"
-TI_PDK_LIMIT_SOCS = "dra72x dra75x dra78x"
+# Currently removing the sgx machine feature because there is no SGX package
+# available for omap5
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"

conf/machine/dra7xx-hs-evm.conf

@@ -1,19 +0,0 @@
-#@TYPE: Machine
-#@NAME: DRA7xx HS EVM
-#@DESCRIPTION: Machine configuration for the TI DRA7xx HS EVM
-
-require conf/machine/dra7xx-evm.conf
-
-UBOOT_MACHINE = "dra7xx_hs_evm_config"
-
-UBOOT_ENTRYPOINT = "0x82000000"
-UBOOT_LOADADDRESS = "0x82000000"
-UBOOT_RD_LOADADDRESS = "0x84000000"
-UBOOT_RD_ENTRYPOINT = "0x84000000"
-
-TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_AUTO}/dra7"
-
-OPTEEMACHINE = "ti"
-OPTEEFLAVOR = "dra7xx"
-OPTEEOUTPUTMACHINE = "ti"
-OPTEEPAGER = "y"

conf/machine/include/beaglebone.inc

@@ -1,12 +0,0 @@
-python () {
-    layers = d.getVar("BBFILE_COLLECTIONS")
-    if not layers:
-        return
-    if "yoctobsp" in layers:
-        bb.fatal("\nmeta-yocto-bsp has been detected in bblayers.conf, which provides basic reference BSP for beaglebone platform. " \
-                "\nSince meta-ti provides official comprehensive BSP for TI SoCs, including beaglebone, there could be potential conflicts " \
-                "\nbetween beaglebone machine definitions available in meta-yocto-bsp and meta-ti layers. It is recommended to remove " \
-                "\nor disable meta-yocto-bsp in bblayers.conf, when using meta-ti and building for beaglebone platform. Alternatively, " \
-                "\nit is possible to build for am335x-evm with meta-ti, which is a more generic platform for Sitara AM335x SoC and " \
-                "\nalso covers beaglebone variants.")
-}

conf/machine/include/c66x.inc

@@ -1,9 +0,0 @@
-require conf/machine/include/keystone.inc
-SOC_FAMILY_append = ":c66x"
-
-# HACK: The c66x family is composed of devices with only DSP cores, and no ARM
-#       cores. The Linux kernel is not supported on these machines.
-PREFERRED_PROVIDER_virtual/kernel ?= "linux-dummy"
-EXTRA_IMAGEDEPENDS = ""
-
-IMAGE_FSTYPES = "tar.xz"

conf/machine/include/davinci.inc

@@ -1,13 +1,12 @@
 require conf/machine/include/tune-arm926ejs.inc
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r54"
+MACHINE_KERNEL_PR = "r53"
 
-KERNEL_IMAGETYPE = "zImage"
+KERNEL_IMAGETYPE = "uImage"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
-PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+PREFERRED_PROVIDER_virtual/kernel = "linux-davinci"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
 
 UBOOT_MACHINE = "davinci_dvevm_config"
 

conf/machine/include/dra7xx.inc

@@ -1,4 +0,0 @@
-require conf/machine/include/omap-a15.inc
-SOC_FAMILY_append = ":dra7xx"
-
-MACHINE_FEATURES += "pci"

conf/machine/include/k2e.inc

@@ -1,6 +0,0 @@
-require conf/machine/include/keystone.inc
-SOC_FAMILY_append = ":k2e"
-
-# Set the list of device targets for ti-pdk class recipes
-TI_PDK_LIMIT_SOCS = "k2e"
-TI_PDK_LIMIT_BOARDS = "evmK2E"

conf/machine/include/k2g.inc

@@ -1,6 +0,0 @@
-require conf/machine/include/keystone.inc
-SOC_FAMILY_append = ":k2g"
-
-# Set the list of device targets for ti-pdk class recipes
-TI_PDK_LIMIT_SOCS = "k2g"
-TI_PDK_LIMIT_BOARDS = "evmK2G iceK2G"

conf/machine/include/k2hk.inc

@@ -1,6 +0,0 @@
-require conf/machine/include/keystone.inc
-SOC_FAMILY_append = ":k2hk"
-
-# Set the list of device targets for ti-pdk class recipes
-TI_PDK_LIMIT_SOCS = "k2h k2k"
-TI_PDK_LIMIT_BOARDS = "evmK2H evmK2K"

conf/machine/include/k2l.inc

@@ -1,6 +0,0 @@
-require conf/machine/include/keystone.inc
-SOC_FAMILY_append = ":k2l"
-
-# Set the list of device targets for ti-pdk class recipes
-TI_PDK_LIMIT_SOCS = "k2l"
-TI_PDK_LIMIT_BOARDS = "evmK2L"

conf/machine/include/k3.inc

@@ -1,32 +0,0 @@
-require conf/machine/include/ti-soc.inc
-SOC_FAMILY_append = ":k3"
-
-require conf/machine/include/arm/arch-arm64.inc
-
-# Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r0"
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
-PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
-
-KERNEL_IMAGETYPE = "Image"
-KERNEL_IMAGETYPES = "Image vmlinux.gz"
-
-UBOOT_ARCH = "arm"
-UBOOT_ENTRYPOINT = "0x80008000"
-UBOOT_LOADADDRESS = "0x80008000"
-
-EXTRA_IMAGEDEPENDS += " \
-    virtual/bootloader \
-"
-
-MACHINE_GUI_CLASS = "smallscreen"
-
-# Use the expected value of the ubifs filesystem's volume name in the kernel
-# and u-boot.
-UBI_VOLNAME = "rootfs"
-
-# List common SoC features, may need to add touchscreen for specific machines
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet pci sgx"
-# Not ready yet - dsp mmip

conf/machine/include/keystone.inc

@@ -1,27 +1,23 @@
-require conf/machine/include/ti-soc.inc
-SOC_FAMILY_append = ":keystone"
+SOC_FAMILY = "keystone"
+require conf/machine/include/soc-family.inc
 
-DEFAULTTUNE ?= "armv7athf-neon"
 require conf/machine/include/tune-cortexa15.inc
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
-PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+PREFERRED_PROVIDER_virtual/kernel = "linux-keystone"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-keystone"
+PREFERRED_PROVIDER_u-boot = "u-boot-keystone"
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r10"
+MACHINE_KERNEL_PR = "r6"
 
-KERNEL_IMAGETYPE = "zImage"
+KERNEL_IMAGETYPE = "uImage"
+
+UBOOT_MACHINE = "tci6638_evm_config"
 
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"
 
-# Use the expected value of the ubifs filesystem's volume name in the kernel
-# and u-boot.
-UBI_VOLNAME = "rootfs"
-
 EXTRA_IMAGEDEPENDS += "u-boot"
 EXTRA_IMAGEDEPENDS += "boot-monitor"
 
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat pci dsp"
-MACHINE_FEATURES_BACKFILL_CONSIDERED = "rtc"
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat"

conf/machine/include/omap-a15.inc

@@ -1,19 +1,16 @@
-require conf/machine/include/ti-soc.inc
-SOC_FAMILY_append = ":omap-a15"
+SOC_FAMILY = "omap-a15"
+require conf/machine/include/soc-family.inc
 
-DEFAULTTUNE ?= "armv7athf-neon"
 require conf/machine/include/tune-cortexa15.inc
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r7"
+MACHINE_KERNEL_PR = "r1"
 
 PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
 PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
 PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
 
-KERNEL_IMAGETYPE = "zImage"
-KERNEL_IMAGETYPES = "zImage uImage"
-KERNEL_CLASSES += "kernel-uimage"
+KERNEL_IMAGETYPE = "uImage"
 
 UBOOT_ARCH = "arm"
 UBOOT_ENTRYPOINT = "0x80008000"
@@ -26,11 +23,4 @@ XSERVER = "xserver-xorg \
            xf86-input-evdev \
            xf86-video-fbdev"
 
-MACHINE_GUI_CLASS = "smallscreen"
-
-# Use the expected value of the ubifs filesystem's volume name in the kernel
-# and u-boot.
-UBI_VOLNAME = "rootfs"
-
-# List common SoC features, may need to add touchscreen for specific machines
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet sgx mmip dsp"
+GUI_MACHINE_CLASS = "smallscreen"

conf/machine/include/omap3.inc

@@ -1,7 +1,6 @@
-require conf/machine/include/ti-soc.inc
-SOC_FAMILY_append = ":omap3"
+SOC_FAMILY = "omap3"
+require conf/machine/include/soc-family.inc
 
-DEFAULTTUNE ?= "armv7athf-neon"
 require conf/machine/include/tune-cortexa8.inc
 
 PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
@@ -14,19 +13,16 @@ XSERVER = "xserver-xorg \
            xf86-input-keyboard"
 
 # Default to external video, change to smallscreen for built-in LCD
-MACHINE_GUI_CLASS = "bigscreen"
+GUI_MACHINE_CLASS = "bigscreen"
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r127"
+MACHINE_KERNEL_PR = "r125"
 
-KERNEL_IMAGETYPE = "zImage"
+KERNEL_IMAGETYPE = "uImage"
 
 # Default providers, may need to override for specific machines
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
-PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
-
-KERNEL_DEVICETREE = "omap3-beagle.dtb omap3-beagle-xm.dtb omap3-beagle-xm-ab.dtb omap3-evm.dtb omap3-evm-37xx.dtb am3517-evm.dtb"
+PREFERRED_PROVIDER_virtual/kernel = "linux-omap"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
 
 UBOOT_ARCH = "arm"
 UBOOT_MACHINE = "omap3_evm_config"

conf/machine/include/omap4.inc

@@ -1,23 +1,24 @@
-require conf/machine/include/ti-soc.inc
-SOC_FAMILY_append = ":omap4"
+SOC_FAMILY = "omap4"
+require conf/machine/include/soc-family.inc
 
-DEFAULTTUNE ?= "armv7athf-neon"
 require conf/machine/include/tune-cortexa9.inc
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
-PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
+PREFERRED_PROVIDER_virtual/kernel = "linux-omap4"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
 
 PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
 XSERVER = "xserver-xorg \
+           xserver-xorg-extension-dri \
+           xserver-xorg-extension-dri2 \
+           xserver-xorg-extension-glx \
            xserver-xorg-module-exa \
            xf86-input-evdev \
            xf86-video-omap"
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r4"
+MACHINE_KERNEL_PR = "r1"
 
-KERNEL_IMAGETYPE = "zImage"
+KERNEL_IMAGETYPE = "uImage"
 
 UBOOT_MACHINE = "omap4_panda_config"
 

conf/machine/include/omapl1.inc

@@ -1,2 +0,0 @@
-require conf/machine/include/ti-soc.inc
-SOC_FAMILY_append = ":omapl1"

conf/machine/include/omapl137.inc

@@ -1,5 +0,0 @@
-require conf/machine/include/omapl1.inc
-SOC_FAMILY_append = ":omapl137"
-
-# Set the list of device targets for ti-pdk class recipes
-TI_PDK_LIMIT_SOCS = "omapl137"

conf/machine/include/omapl138.inc

@@ -1,5 +1,2 @@
-require conf/machine/include/omapl1.inc
-SOC_FAMILY_append = ":omapl138"
-
-# Set the list of device targets for ti-pdk class recipes
-TI_PDK_LIMIT_SOCS = "omapl138"
+SOC_FAMILY = "omapl138"
+require conf/machine/include/soc-family.inc

conf/machine/include/ti-soc.inc

@@ -1,4 +0,0 @@
-# This is a generic TI SOC family. It is a superset of all other SOCs
-# and platforms defined in meta-ti to allow BSP-level overrides.
-SOC_FAMILY = "ti-soc"
-require conf/machine/include/soc-family.inc

conf/machine/include/ti33x.inc

@@ -1,7 +1,6 @@
-require conf/machine/include/ti-soc.inc
-SOC_FAMILY_append = ":ti33x"
+SOC_FAMILY = "ti33x"
+require conf/machine/include/soc-family.inc
 
-DEFAULTTUNE ?= "armv7athf-neon"
 require conf/machine/include/tune-cortexa8.inc
 
 PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
@@ -14,25 +13,17 @@ XSERVER = "xserver-xorg \
            xf86-input-keyboard"
 
 # Default to external video, change to smallscreen for built-in LCD
-MACHINE_GUI_CLASS = "bigscreen"
+GUI_MACHINE_CLASS = "bigscreen"
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r22"
+MACHINE_KERNEL_PR = "r19"
 
 # Default providers, may need to override for specific machines
 PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
 PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
 PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
 
-KERNEL_IMAGETYPE = "zImage"
-
-KERNEL_DEVICETREE = "am335x-evm.dtb am335x-evmsk.dtb \
-                    am335x-icev2.dtb am335x-icev2-prueth.dtb \
-                    am335x-bone.dtb am335x-boneblue.dtb \
-                    am335x-boneblack.dtb am335x-boneblack-wireless.dtb \
-                    am335x-bonegreen.dtb am335x-bonegreen-wireless.dtb"
-
-KERNEL_DEVICETREE += "${@base_conditional('ENABLE_TI_UIO_DEVICES', '1', 'am335x-icev2-pru-excl-uio.dtb', '', d)}"
+KERNEL_IMAGETYPE = "uImage"
 
 UBOOT_ARCH = "arm"
 UBOOT_MACHINE = "am335x_evm_config"
@@ -40,15 +31,7 @@ UBOOT_MACHINE = "am335x_evm_config"
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"
 
-# Use the expected value of the ubifs filesystem's volume name in the kernel
-# and u-boot.
-UBI_VOLNAME = "rootfs"
-
 EXTRA_IMAGEDEPENDS += "u-boot"
 
 # List common SoC features, may need to add touchscreen for specific machines
 MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet sgx"
-
-# Set the list of device targets for ti-pdk class recipes
-TI_PDK_LIMIT_SOCS = "am335x"
-TI_PDK_LIMIT_BOARDS = "evmAM335x icev2AM335x iceAMIC110 bbbAM335x skAM335x"

conf/machine/include/ti43x.inc

@@ -1,52 +0,0 @@
-require conf/machine/include/ti-soc.inc
-SOC_FAMILY_append = ":ti43x"
-
-DEFAULTTUNE ?= "armv7athf-neon"
-require conf/machine/include/tune-cortexa9.inc
-
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-
-# For built-in LCD, add xf86-input-tslib
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-video-fbdev \
-           xf86-input-keyboard"
-
-# Default to external video, change to smallscreen for built-in LCD
-MACHINE_GUI_CLASS = "bigscreen"
-
-# Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r3"
-
-# Default providers, may need to override for specific machines
-PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
-PREFERRED_PROVIDER_u-boot = "u-boot-ti-staging"
-
-KERNEL_IMAGETYPE = "zImage"
-
-KERNEL_DEVICETREE = "am437x-gp-evm.dtb am437x-gp-evm-hdmi.dtb \
-                    am437x-sk-evm.dtb am437x-idk-evm.dtb \
-                    am43x-epos-evm.dtb am43x-epos-evm-hdmi.dtb"
-
-KERNEL_DEVICETREE += "${@base_conditional('ENABLE_TI_UIO_DEVICES', '1', 'am437x-idk-pru-excl-uio.dtb', '', d)}"
-
-UBOOT_ARCH = "arm"
-UBOOT_MACHINE = "am43xx_evm_config"
-
-UBOOT_ENTRYPOINT = "0x80008000"
-UBOOT_LOADADDRESS = "0x80008000"
-
-# Use the expected value of the ubifs filesystem's volume name in the kernel
-# and u-boot.
-UBI_VOLNAME = "rootfs"
-
-EXTRA_IMAGEDEPENDS += "u-boot"
-
-# List common SoC features, may need to add touchscreen for specific machines
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet sgx"
-
-# Set the list of device targets for ti-pdk class recipes
-TI_PDK_LIMIT_SOCS = "am437x"
-TI_PDK_LIMIT_BOARDS = "evmAM437x idkAM437x skAM437x"

conf/machine/include/tune-cortexa15.inc

@@ -0,0 +1,36 @@
+DEFAULTTUNE ?= "armv7a-neon"
+
+require conf/machine/include/arm/arch-armv7a.inc
+
+TUNEVALID[cortexa15] = "Enable Cortex-A15 specific processor optimizations"
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa15", "-mtune=cortex-a15", "", d)}"
+
+# Little Endian base configs
+AVAILTUNES += "cortexa15 cortexa15t cortexa15-neon cortexa15t-neon"
+ARMPKGARCH_tune-cortexa15 = "cortexa15"
+ARMPKGARCH_tune-cortexa15t = "cortexa15"
+ARMPKGARCH_tune-cortexa15-neon = "cortexa15"
+ARMPKGARCH_tune-cortexa15t-neon = "cortexa15"
+TUNE_FEATURES_tune-cortexa15 = "${TUNE_FEATURES_tune-armv7a} cortexa15"
+TUNE_FEATURES_tune-cortexa15t = "${TUNE_FEATURES_tune-armv7at} cortexa15"
+TUNE_FEATURES_tune-cortexa15-neon = "${TUNE_FEATURES_tune-armv7a-neon} cortexa15"
+TUNE_FEATURES_tune-cortexa15t-neon = "${TUNE_FEATURES_tune-armv7at-neon} cortexa15"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a} cortexa15-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} cortexa15-vfp cortexa15t2-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} cortexa15-vfp cortexa15-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15t-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7at-neon} cortexa15-vfp cortexa15-vfp-neon cortexa15t2-vfp cortexa15t2-vfp-neon"
+
+# VFP Tunes
+AVAILTUNES += "cortexa15hf cortexa15thf cortexa15hf-neon cortexa15thf-neon"
+ARMPKGARCH_tune-cortexa15hf = "cortexa15"
+ARMPKGARCH_tune-cortexa15thf = "cortexa15"
+ARMPKGARCH_tune-cortexa15hf-neon = "cortexa15"
+ARMPKGARCH_tune-cortexa15thf-neon = "cortexa15"
+TUNE_FEATURES_tune-cortexa15hf ?= "${TUNE_FEATURES_tune-armv7ahf} cortexa15"
+TUNE_FEATURES_tune-cortexa15thf ?= "${TUNE_FEATURES_tune-armv7athf} cortexa15"
+TUNE_FEATURES_tune-cortexa15hf-neon ?= "${TUNE_FEATURES_tune-armv7ahf-neon} cortexa15"
+TUNE_FEATURES_tune-cortexa15thf-neon ?= "${TUNE_FEATURES_tune-armv7athf-neon} cortexa15"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf} cortexa15hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} cortexa15hf-vfp cortexa15t2hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon} cortexa15hf-vfp cortexa15hf-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa15thf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon} cortexa15hf-vfp cortexa15hf-vfp-neon cortexa15t2hf-vfp cortexa15t2hf-vfp-neon"

conf/machine/include/tune-cortexa7.inc

@@ -0,0 +1,36 @@
+DEFAULTTUNE ?= "armv7a-neon"
+
+require conf/machine/include/arm/arch-armv7a.inc
+
+TUNEVALID[cortexa7] = "Enable Cortex-A7 specific processor optimizations"
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa7", "-mtune=cortex-a7", "", d)}"
+
+# Little Endian base configs
+AVAILTUNES += "cortexa7 cortexa7t cortexa7-neon cortexa7t-neon"
+ARMPKGARCH_tune-cortexa7 = "cortexa7"
+ARMPKGARCH_tune-cortexa7t = "cortexa7"
+ARMPKGARCH_tune-cortexa7-neon = "cortexa7"
+ARMPKGARCH_tune-cortexa7t-neon = "cortexa7"
+TUNE_FEATURES_tune-cortexa7 = "${TUNE_FEATURES_tune-armv7a} cortexa7"
+TUNE_FEATURES_tune-cortexa7t = "${TUNE_FEATURES_tune-armv7at} cortexa7"
+TUNE_FEATURES_tune-cortexa7-neon = "${TUNE_FEATURES_tune-armv7a-neon} cortexa7"
+TUNE_FEATURES_tune-cortexa7t-neon = "${TUNE_FEATURES_tune-armv7at-neon} cortexa7"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a} cortexa7-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} cortexa7-vfp cortexa7t2-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} cortexa7-vfp cortexa7-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7t-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7at-neon} cortexa7-vfp cortexa7-vfp-neon cortexa7t2-vfp cortexa7t2-vfp-neon"
+
+# VFP Tunes
+AVAILTUNES += "cortexa7hf cortexa7thf cortexa7hf-neon cortexa7thf-neon"
+ARMPKGARCH_tune-cortexa7hf = "cortexa7"
+ARMPKGARCH_tune-cortexa7thf = "cortexa7"
+ARMPKGARCH_tune-cortexa7hf-neon = "cortexa7"
+ARMPKGARCH_tune-cortexa7thf-neon = "cortexa7"
+TUNE_FEATURES_tune-cortexa7hf ?= "${TUNE_FEATURES_tune-armv7ahf} cortexa7"
+TUNE_FEATURES_tune-cortexa7thf ?= "${TUNE_FEATURES_tune-armv7athf} cortexa7"
+TUNE_FEATURES_tune-cortexa7hf-neon ?= "${TUNE_FEATURES_tune-armv7ahf-neon} cortexa7"
+TUNE_FEATURES_tune-cortexa7thf-neon ?= "${TUNE_FEATURES_tune-armv7athf-neon} cortexa7"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf} cortexa7hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} cortexa7hf-vfp cortexa7t2hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon} cortexa7hf-vfp cortexa7hf-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa7thf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon} cortexa7hf-vfp cortexa7hf-vfp-neon cortexa7t2hf-vfp cortexa7t2hf-vfp-neon"

conf/machine/include/tune-cortexa8.inc

@@ -0,0 +1,36 @@
+DEFAULTTUNE ?= "armv7a-neon"
+
+require conf/machine/include/arm/arch-armv7a.inc
+
+TUNEVALID[cortexa8] = "Enable Cortex-A8 specific processor optimizations"
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa8", "-mtune=cortex-a8", "", d)}"
+
+# Little Endian base configs
+AVAILTUNES += "cortexa8 cortexa8t cortexa8-neon cortexa8t-neon"
+ARMPKGARCH_tune-cortexa8 = "cortexa8"
+ARMPKGARCH_tune-cortexa8t = "cortexa8"
+ARMPKGARCH_tune-cortexa8-neon = "cortexa8"
+ARMPKGARCH_tune-cortexa8t-neon = "cortexa8"
+TUNE_FEATURES_tune-cortexa8 = "${TUNE_FEATURES_tune-armv7a} cortexa8"
+TUNE_FEATURES_tune-cortexa8t = "${TUNE_FEATURES_tune-armv7at} cortexa8"
+TUNE_FEATURES_tune-cortexa8-neon = "${TUNE_FEATURES_tune-armv7a-neon} cortexa8"
+TUNE_FEATURES_tune-cortexa8t-neon = "${TUNE_FEATURES_tune-armv7at-neon} cortexa8"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a} cortexa8-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} cortexa8-vfp cortexa8t2-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} cortexa8-vfp cortexa8-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8t-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7at-neon} cortexa8-vfp cortexa8-vfp-neon cortexa8t2-vfp cortexa8t2-vfp-neon"
+
+# VFP Tunes
+AVAILTUNES += "cortexa8hf cortexa8thf cortexa8hf-neon cortexa8thf-neon"
+ARMPKGARCH_tune-cortexa8hf = "cortexa8"
+ARMPKGARCH_tune-cortexa8thf = "cortexa8"
+ARMPKGARCH_tune-cortexa8hf-neon = "cortexa8"
+ARMPKGARCH_tune-cortexa8thf-neon = "cortexa8"
+TUNE_FEATURES_tune-cortexa8hf ?= "${TUNE_FEATURES_tune-armv7ahf} cortexa8"
+TUNE_FEATURES_tune-cortexa8thf ?= "${TUNE_FEATURES_tune-armv7athf} cortexa8"
+TUNE_FEATURES_tune-cortexa8hf-neon ?= "${TUNE_FEATURES_tune-armv7ahf-neon} cortexa8"
+TUNE_FEATURES_tune-cortexa8thf-neon ?= "${TUNE_FEATURES_tune-armv7athf-neon} cortexa8"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf} cortexa8hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} cortexa8hf-vfp cortexa8t2hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon} cortexa8hf-vfp cortexa8hf-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa8thf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon} cortexa8hf-vfp cortexa8hf-vfp-neon cortexa8t2hf-vfp cortexa8t2hf-vfp-neon"

conf/machine/include/tune-cortexa9.inc

@@ -0,0 +1,36 @@
+DEFAULTTUNE ?= "armv7a-neon"
+
+require conf/machine/include/arm/arch-armv7a.inc
+
+TUNEVALID[cortexa9] = "Enable Cortex-A9 specific processor optimizations"
+TUNE_CCARGS += "${@bb.utils.contains("TUNE_FEATURES", "cortexa9", "-mtune=cortex-a9", "", d)}"
+
+# Little Endian base configs
+AVAILTUNES += "cortexa9 cortexa9t cortexa9-neon cortexa9t-neon"
+ARMPKGARCH_tune-cortexa9 = "cortexa9"
+ARMPKGARCH_tune-cortexa9t = "cortexa9"
+ARMPKGARCH_tune-cortexa9-neon = "cortexa9"
+ARMPKGARCH_tune-cortexa9t-neon = "cortexa9"
+TUNE_FEATURES_tune-cortexa9 = "${TUNE_FEATURES_tune-armv7a} cortexa9"
+TUNE_FEATURES_tune-cortexa9t = "${TUNE_FEATURES_tune-armv7at} cortexa9"
+TUNE_FEATURES_tune-cortexa9-neon = "${TUNE_FEATURES_tune-armv7a-neon} cortexa9"
+TUNE_FEATURES_tune-cortexa9t-neon = "${TUNE_FEATURES_tune-armv7at-neon} cortexa9"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9 = "${PACKAGE_EXTRA_ARCHS_tune-armv7a} cortexa9-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9t = "${PACKAGE_EXTRA_ARCHS_tune-armv7at} cortexa9-vfp cortexa9t2-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7a-neon} cortexa9-vfp cortexa9-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9t-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7at-neon} cortexa9-vfp cortexa9-vfp-neon cortexa9t2-vfp cortexa9t2-vfp-neon"
+
+# VFP Tunes
+AVAILTUNES += "cortexa9hf cortexa9thf cortexa9hf-neon cortexa9thf-neon"
+ARMPKGARCH_tune-cortexa9hf = "cortexa9"
+ARMPKGARCH_tune-cortexa9thf = "cortexa9"
+ARMPKGARCH_tune-cortexa9hf-neon = "cortexa9"
+ARMPKGARCH_tune-cortexa9thf-neon = "cortexa9"
+TUNE_FEATURES_tune-cortexa9hf ?= "${TUNE_FEATURES_tune-armv7ahf} cortexa9"
+TUNE_FEATURES_tune-cortexa9thf ?= "${TUNE_FEATURES_tune-armv7athf} cortexa9"
+TUNE_FEATURES_tune-cortexa9hf-neon ?= "${TUNE_FEATURES_tune-armv7ahf-neon} cortexa9"
+TUNE_FEATURES_tune-cortexa9thf-neon ?= "${TUNE_FEATURES_tune-armv7athf-neon} cortexa9"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9hf = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf} cortexa9hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9thf = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf} cortexa9hf-vfp cortexa9t2hf-vfp"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9hf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7ahf-neon} cortexa9hf-vfp cortexa9hf-vfp-neon"
+PACKAGE_EXTRA_ARCHS_tune-cortexa9thf-neon = "${PACKAGE_EXTRA_ARCHS_tune-armv7athf-neon} cortexa9hf-vfp cortexa9hf-vfp-neon cortexa9t2hf-vfp cortexa9t2hf-vfp-neon"

conf/machine/k2e-evm.conf

@@ -1,32 +0,0 @@
-#@TYPE: Machine
-#@NAME: Keystone 2 K2E machine
-#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2E EVM
-
-require conf/machine/include/k2e.inc
-
-KERNEL_DEVICETREE = "keystone-k2e-evm.dtb"
-
-UBOOT_MACHINE = "k2e_evm_config"
-
-BOOT_MONITOR_MAKE_TARGET = "k2e"
-
-IMAGE_FSTYPES += "ubifs ubi tar.xz"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-SYSVINIT_ENABLED_GETTYS = ""
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# From dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: logical eraseblock size:    126976 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 3856 LEBs
-MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 4000"
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# from dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: physical eraseblock size:   131072 bytes (128 KiB)
-# UBI: sub-page size:              2048
-UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048"

conf/machine/k2e-hs-evm.conf

@@ -1,14 +0,0 @@
-#@TYPE: Machine
-#@NAME: Keystone 2 K2E HS EVM
-#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2E HS EVM
-
-require conf/machine/k2e-evm.conf
-
-UBOOT_MACHINE = "k2e_hs_evm_config"
-
-UBOOT_ENTRYPOINT = "0x82000000"
-UBOOT_LOADADDRESS = "0x82000000"
-UBOOT_RD_LOADADDRESS = "0x84000000"
-UBOOT_RD_ENTRYPOINT = "0x84000000"
-
-TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/k2e"

conf/machine/k2g-evm.conf

@@ -1,35 +0,0 @@
-#@TYPE: Machine
-#@NAME: Keystone 2 K2G machine
-#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2G EVM
-
-require conf/machine/include/k2g.inc
-
-MACHINE_FEATURES += "alsa"
-
-KERNEL_DEVICETREE = "keystone-k2g-evm.dtb keystone-k2g-evm-lcd.dtb keystone-k2g-ice.dtb \
-                     ${@base_conditional('ENABLE_TI_UIO_DEVICES', '1', 'keystone-k2g-ice-pru-excl-uio.dtb', '', d)}"
-
-UBOOT_MACHINE = "k2g_evm_config"
-
-BOOT_MONITOR_MAKE_TARGET = "k2g"
-
-IMAGE_FSTYPES += "ubifs ubi tar.xz"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-SYSVINIT_ENABLED_GETTYS = ""
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# From dmesg:
-# UBI: smallest flash I/O unit:    4096
-# UBI: logical eraseblock size:    253952 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 1926 LEBs
-MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 2000"
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# from dmesg:
-# UBI: smallest flash I/O unit:    4096
-# UBI: physical eraseblock size:   256 KiB
-# UBI: sub-page size:              4096
-UBINIZE_ARGS = "-m 4096 -p 256KiB -s 4096 -O 4096"

conf/machine/k2g-hs-evm.conf

@@ -1,14 +0,0 @@
-#@TYPE: Machine
-#@NAME: Keystone 2 K2G HS EVM
-#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2G HS EVM
-
-require conf/machine/k2g-evm.conf
-
-UBOOT_MACHINE = "k2g_hs_evm_config"
-
-UBOOT_ENTRYPOINT = "0x82000000"
-UBOOT_LOADADDRESS = "0x82000000"
-UBOOT_RD_LOADADDRESS = "0x84000000"
-UBOOT_RD_ENTRYPOINT = "0x84000000"
-
-TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/k2g"

conf/machine/k2hk-evm.conf

@@ -1,32 +0,0 @@
-#@TYPE: Machine
-#@NAME: Keystone 2 K2HK machine
-#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2HK EVM
-
-require conf/machine/include/k2hk.inc
-
-KERNEL_DEVICETREE = "keystone-k2hk-evm.dtb"
-
-UBOOT_MACHINE = "k2hk_evm_config"
-
-BOOT_MONITOR_MAKE_TARGET = "k2hk"
-
-IMAGE_FSTYPES += "ubifs ubi tar.xz"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-SYSVINIT_ENABLED_GETTYS = ""
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# From dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: logical eraseblock size:    126976 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 3856 LEBs
-MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 4000"
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# from dmesg:
-# UBI: smallest flash I/O unit:    2048
-# UBI: physical eraseblock size:   131072 bytes (128 KiB)
-# UBI: sub-page size:              2048
-UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048"

conf/machine/k2hk-hs-evm.conf

@@ -1,14 +0,0 @@
-#@TYPE: Machine
-#@NAME: Keystone 2 K2HK HS EVM
-#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2HK HS EVM
-
-require conf/machine/k2hk-evm.conf
-
-UBOOT_MACHINE = "k2hk_hs_evm_config"
-
-UBOOT_ENTRYPOINT = "0x82000000"
-UBOOT_LOADADDRESS = "0x82000000"
-UBOOT_RD_LOADADDRESS = "0x84000000"
-UBOOT_RD_ENTRYPOINT = "0x84000000"
-
-TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/k2hk"

conf/machine/k2l-evm.conf

@@ -1,32 +0,0 @@
-#@TYPE: Machine
-#@NAME: Keystone 2 K2L machine
-#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2L EVM
-
-require conf/machine/include/k2l.inc
-
-KERNEL_DEVICETREE = "keystone-k2l-evm.dtb"
-
-UBOOT_MACHINE = "k2l_evm_config"
-
-BOOT_MONITOR_MAKE_TARGET = "k2l"
-
-IMAGE_FSTYPES += "ubifs ubi tar.xz"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-SYSVINIT_ENABLED_GETTYS = ""
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# From dmesg:
-# UBI: smallest flash I/O unit:    4096
-# UBI: logical eraseblock size:    253952 bytes
-# from ubiattach stdout:
-# UBI device number 0, total 1926 LEBs
-MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 2000"
-
-# do ubiattach /dev/ubi_ctrl -m 4
-# from dmesg:
-# UBI: smallest flash I/O unit:    4096
-# UBI: physical eraseblock size:   256 KiB
-# UBI: sub-page size:              4096
-UBINIZE_ARGS = "-m 4096 -p 256KiB -s 4096 -O 4096"

conf/machine/k2l-hs-evm.conf

@@ -1,14 +0,0 @@
-#@TYPE: Machine
-#@NAME: Keystone 2 K2L HS EVM
-#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2L HS EVM
-
-require conf/machine/k2l-evm.conf
-
-UBOOT_MACHINE = "k2l_hs_evm_config"
-
-UBOOT_ENTRYPOINT = "0x82000000"
-UBOOT_LOADADDRESS = "0x82000000"
-UBOOT_RD_LOADADDRESS = "0x84000000"
-UBOOT_RD_ENTRYPOINT = "0x84000000"
-
-TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/k2l"

conf/machine/keystone-evm.conf

@@ -0,0 +1,27 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2
+
+require conf/machine/include/keystone.inc
+
+IMAGE_FSTYPES += "ubi tar.gz cpio"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 857 LEBs
+# MKUBIFS_ARGS = "-m 2048 -e 129024 -c 857"
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 857"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              2048
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048"

conf/machine/omap3evm.conf

@@ -4,7 +4,9 @@
 
 require conf/machine/include/omap3.inc
 
-MACHINE_GUI_CLASS = "smallscreen"
+# Use built-in LCD by default
+XSERVER += "xf86-input-tslib"
+GUI_MACHINE_CLASS = "smallscreen"
 MACHINE_FEATURES += "touchscreen ethernet"
 
 IMAGE_FSTYPES += "jffs2 tar.gz"
@@ -13,6 +15,8 @@ EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 SERIAL_CONSOLE = "115200 ttyS0"
 USE_VT = "0"
 
+PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
+
 EXTRA_IMAGEDEPENDS += "x-load"
 
 # NOTE: there are NAND and OneNAND versions of this board...

conf/machine/omap5-evm.conf

@@ -6,9 +6,7 @@ require conf/machine/include/omap-a15.inc
 
 IMAGE_FSTYPES += "ubi tar.gz"
 
-KERNEL_DEVICETREE = "omap5-uevm.dtb"
-
-SERIAL_CONSOLE = "115200 ttyS2"
+SERIAL_CONSOLE = "115200 ttyO2"
 
 # UBI information.  Note that this is board and kernel specific.  Changes
 # in your kernel port may require changes in these variables.  For more
@@ -21,7 +19,7 @@ SERIAL_CONSOLE = "115200 ttyS2"
 # UBI: logical eraseblock size:    126976 bytes
 # from ubiattach stdout:
 # UBI device number 0, total 1988 LEBs
-MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 4300"
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3836"
 
 # do ubiattach /dev/ubi_ctrl -m 7 -O 2048
 # from dmesg:
@@ -32,3 +30,7 @@ MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 4300"
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
 
 UBOOT_MACHINE = "omap5_uevm_config"
+
+# Currently removing the sgx machine feature because there is no SGX package
+# available for omap5
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"

conf/machine/omapl137-evm.conf

@@ -1,15 +0,0 @@
-#@TYPE: Machine
-#@NAME: OMAP-L137 EVM
-#@DESCRIPTION: Machine configuration for the TI OMAP-L137 EVM board
-
-require conf/machine/include/davinci.inc
-require conf/machine/include/omapl137.inc
-
-# HACK: The omapl137 family does not have linux kernel support.
-PREFERRED_PROVIDER_virtual/kernel = "linux-dummy"
-EXTRA_IMAGEDEPENDS = ""
-
-IMAGE_FSTYPES = "tar.xz"
-
-# Set the list of device targets for ti-pdk class recipes
-TI_PDK_LIMIT_BOARDS = "evmOMAPL137"

conf/machine/omapl138-lcdk.conf

@@ -1,21 +0,0 @@
-#@TYPE: Machine
-#@NAME: OMAP-L138 LCDK
-#@DESCRIPTION: Machine configuration for the TI OMAP-L138 LCDK board
-
-require conf/machine/include/davinci.inc
-require conf/machine/include/omapl138.inc
-
-UBOOT_MACHINE = "omapl138_lcdk_config"
-UBOOT_SUFFIX = "ais"
-
-UBOOT_ENTRYPOINT = "0xc0008000"
-UBOOT_LOADADDRESS = "0xc0008000"
-
-IMAGE_FSTYPES += "tar.xz"
-
-SERIAL_CONSOLE = "115200 ttyS2"
-
-KERNEL_DEVICETREE = "da850-evm.dtb da850-lcdk.dtb"
-
-# Set the list of device targets for ti-pdk class recipes
-TI_PDK_LIMIT_BOARDS = "lcdkOMAPL138"

conf/machine/pandaboard.conf

@@ -4,13 +4,11 @@
 
 require conf/machine/include/omap4.inc
 
-MACHINE_GUI_CLASS = "bigscreen"
+GUI_MACHINE_CLASS = "bigscreen"
 
 IMAGE_FSTYPES += "tar.gz"
 
-KERNEL_DEVICETREE = "omap4-panda.dtb omap4-panda-a4.dtb omap4-panda-es.dtb"
-
-SERIAL_CONSOLE = "115200 ttyS2"
+SERIAL_CONSOLE = "115200 ttyO2"
 
 MACHINE_EXTRA_RRECOMMENDS = " kernel-modules"
 MACHINE_FEATURES = "kernel26 wifi bluetooth alsa apm ext2 screen usbgadget usbhost vfat sgx"

licenses/TI-TFL

@@ -1,62 +0,0 @@
-TEXAS INSTRUMENTS TEXT FILE LICENSE
-
-Copyright (c) [earliest year] - [latest year] Texas Instruments Incorporated
-
-All rights reserved not granted herein.
-
-Limited License.
-
-Texas Instruments Incorporated grants a world-wide, royalty-free,
-non-exclusive license under copyrights and patents it now or hereafter owns
-or controls to make, have made, use, import, offer to sell and sell
-("Utilize") this software subject to the terms herein.  With respect to the
-foregoing patent license, such license is granted  solely to the extent that
-any such patent is necessary to Utilize the software alone.  The patent
-license shall not apply to any combinations which include this software,
-other than combinations with devices manufactured by or for TI ("TI
-Devices").  No hardware patent is licensed hereunder.
-
-Redistributions must preserve existing copyright notices and reproduce this
-license (including the above copyright notice and the disclaimer and (if
-applicable) source code license limitations below) in the documentation
-and/or other materials provided with the distribution
-
-Redistribution and use in binary form, without modification, are permitted
-provided that the following conditions are met:
-
-* No reverse engineering, decompilation, or disassembly of this software is
-permitted with respect to any software provided in binary form.
-
-* any redistribution and use are licensed by TI for use only with TI
-Devices.
-
-* Nothing shall obligate TI to provide you with source code for the software
-licensed and provided to you in object code.
-
-If software source code is provided to you, modification and redistribution
-of the source code are permitted provided that the following conditions are
-met:
-
-* any redistribution and use of the source code, including any resulting
-derivative works, are licensed by TI for use only with TI Devices.
-
-* any redistribution and use of any object code compiled from the source
-code and any resulting derivative works, are licensed by TI for use only
-with TI Devices.
-
-Neither the name of Texas Instruments Incorporated nor the names of its
-suppliers may be used to endorse or promote products derived from this
-software without specific prior written permission.
-
-DISCLAIMER.
-
-THIS SOFTWARE IS PROVIDED BY TI AND TI'S LICENSORS "AS IS" AND ANY EXPRESS
-OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
-NO EVENT SHALL TI AND TI'S LICENSORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

licenses/TI-TSPA

@@ -1,206 +0,0 @@
-Texas Instruments Incorporated
-Technology and Software Publicly Available
-Software License Agreement
-
-
-Important - Please read the following license agreement carefully.  This is
-a legally binding agreement.  Do not click "i have read and agree" or use
-(as applicable) the Licensed Materials unless: (1) you are authorized to
-accept and agree to the terms of this license agreement on behalf of
-yourself or your company (as applicable) and (2) you intend to be bound by
-the terms of this license agreement on behalf of yourself or your company
-(as applicable).
-
-This Software License Agreement ("Agreement") is a legal agreement between
-you (either an individual or entity) and Texas Instruments Incorporated
-("TI"), 12500 TI Boulevard, Dallas, Texas 75243.  The "Licensed Materials"
-subject to this Agreement include the software programs (in whole or in
-part), that accompany this Agreement and set forth in the applicable
-software manifest and which you access "on-line" and/or electronic
-documentation (in whole or in part) associated and provided with these
-software programs.  By installing, copying or otherwise using the Licensed
-Materials you agree to abide by the terms of this Agreement.  If you choose
-not to accept or agree with these terms, do not download or install the
-Licensed Materials.
-
-Note Regarding Possible Access to Open Source Software:  The Licensed
-Materials may be bundled with Open Source Software.  "Open Source Software"
-means any software licensed under terms requiring that (A) other software
-("Proprietary Software") incorporated, combined or distributed with such
-software or developed using such software: (i) be disclosed or distributed
-in source code form; or (ii) otherwise be licensed on terms inconsistent
-with the terms of this Agreement, including but not limited to permitting
-use of the Proprietary Software on or with devices other than TI Devices, or
-(B) require the owner of Proprietary Software to license any of its patents
-to users of the Open Source Software and/or Proprietary Software
-incorporated, combined or distributed with such Open Source Software or
-developed using such Open Source Software.
-
-You may gain access to Open Source Software, in which case such Open Source
-Software will be listed in the applicable software manifest (in whole or in
-part, the "Open Source Materials").  Your use of the Open Source Materials
-is subject to the separate licensing terms applicable to such Open Source
-Materials as specified in the applicable software manifest.  For
-clarification, this Agreement does not limit your rights under, or grant you
-rights that supersede, the license terms of any applicable Open Source
-Materials license agreement.  If any of the Open Source Materials have been
-provided to you in object code only, TI will provide to you or show you
-where can access the source code versions of such Open Source Materials if
-you contact TI at Texas Instruments Incorporated, 12500 TI Boulevard, Mail
-Station 8638, Dallas, Texas 75243, Attention: Contracts Manager.  You may
-terminate this Agreement in the event you choose not to accept or agree with
-the terms in any applicable Open Source Materials license agreement,
-provided that such termination occurs within five (5) calendar days of
-acceptance of this Agreement and you abide by all applicable license terms
-in this Agreement until such termination.
-
-1. License.
-
-a. Source Code License.  For the Licensed Materials provided in source code
-format, TI hereby grants to you a limited, non-exclusive license to
-reproduce, use, and create modified or derivative works of the Licensed
-Materials provided to you in source code format and to distribute an
-unlimited number of copies of such source code Licensed Materials, or any
-derivatives thereof, in any format.
-
-b.  Object Code License.  For the Licensed Materials provided in object code
-format, TI hereby grants to you a limited, non-exclusive license to
-reproduce and use the Licensed Materials provided to you in object code
-format and to distribute an unlimited number of object or executable copies
-of such object code Licensed Materials.
-
-2. Termination.  This Agreement is effective until terminated.  Without
-prejudice to any other rights, TI may terminate your right to use the
-Licensed Materials under this Agreement if you fail to comply with the terms
-of this Agreement.  In such event, you shall destroy all copies of the
-Licensed Materials, including all portions and derivatives thereof.
-
-3. Intellectual Property Rights.
-
-a. The Licensed Materials being provided to you hereunder are being made
-publicly available by TI, even though they contain copyrighted material of
-TI and its licensors, if applicable.   In no event may you alter, remove or
-destroy any copyright notice included in the Licensed Materials.  To the
-extent that any of the Licensed Materials are provided in binary or object
-code only, you may not unlock, decompile, reverse engineer, disassemble or
-otherwise translate such binary or object code to human-perceivable form.
-The source code of such reverse engineered code may contain TI trade secret
-and other proprietary information. TI reserves all rights not specifically
-granted under this Agreement.
-
-b. Certain Licensed Materials may (i) require patent licenses from third
-parties claiming patent rights covering implementation of the Licensed
-Materials or (ii) be based on industry recognized standards or software
-programs published by industry recognized standards bodies and certain third
-parties may claim to own patents or copyrights that cover implementation of
-those standards.  You acknowledge and agree that this Agreement does not
-convey a license to any such third party patents and copyrights.
-
-c. YOU ACKNOWLEDGE AND AGREE THAT TI SHALL NOT BE LIABLE FOR AND SHALL NOT
-DEFEND OR INDEMNIFY YOU AGAINST ANY THIRD PARTY INFRINGEMENT CLAIM THAT
-RELATES TO OR IS BASED ON YOUR MANUFACTURE, USE, OR DISTRIBUTION OF THE
-LICENSED MATERIALS OR YOUR MANUFACTURE, USE, OFFER FOR SALE, SALE,
-IMPORTATION OR DISTRIBUTION OF YOUR PRODUCTS THAT INCLUDE OR INCORPORATE THE
-LICENSED MATERIALS.
-
-d. You acknowledge and agree that you are responsible for any fees or
-royalties that may be payable to any third party based on such third party's
-interests in the Licensed Materials described in Section 3(b) above (the
-"Third Party Payment Obligations").  You agree to indemnify TI against any
-Third Party Payment Obligations and will defend any claim, suit or
-proceeding brought against TI insofar as such claim, suit or proceeding is
-based on your failure to pay any Third Party Payment Obligations.
-
-4. Warranties and Limitations.  THE LICENSED MATERIALS ARE PROVIDED "AS IS".
-TI AND ITS LICENSORS MAKE NO WARRANTY OR REPRESENTATION, EXPRESS, IMPLIED OR
-STATUTORY, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTIBILITY, FITNESS FOR
-A PARTICULAR PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS OF
-RESPONSES, RESULTS AND LACK OF NEGLIGENCE.  TI DISCLAIMS ANY WARRANTY OF
-TITLE, QUIET ENJOYMENT, QUIET POSESSION, AND NON-INFRINGEMENT OF ANY THIRD
-PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO THE LICENSED MATERIALS OR
-USE OF THOSE MATERIALS.
-
-YOU ACKNOWLEDGE AND AGREE THAT THE LICENSED MATERIALS MAY NOT BE INTENDED
-FOR PRODUCTION APPLICATIONS AND MAY CONTAIN IRREGULARITIES AND DEFECTS NOT
-FOUND IN PRODUCTION SOFTWARE.  FURTHERMORE, YOU ACKNOWLEDGE AND AGREE THAT
-THE LICENSED MATERIALS HAVE NOT BEEN TESTED OR CERTIFIED BY ANY GOVERNMENT
-AGENCY OR INDUSTRY REGULATORY ORGANIZATION OR ANY OTHER THIRD PARTY
-ORGANIZATION.  YOU AGREE THAT PRIOR TO USING, INCORPORATING OR DISTRIBUTING
-THE LICENSED MATERIALS IN OR WITH ANY COMMERCIAL PRODUCT THAT YOU WILL
-THOROUGHLY TEST THE PRODUCT AND THE FUNCTIONALITY OF THE LICENSED MATERIALS
-IN OR WITH THAT PRODUCT AND BE SOLELY RESPONSIBLE FOR ANY PROBLEMS OR
-FAILURES.
-
-IN NO EVENT SHALL TI OR ITS LICENSORS BE LIABLE FOR ANY SPECIAL, INDIRECT,
-INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED ON ANY THEORY
-OF LIABILITY, ARISING IN ANY WAY OUT OF THIS AGREEMENT, OR YOUR USE OF THE
-LICENSED MATERIALS, WHETHER OR NOT TI HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.  EXCLUDED DAMAGES INCLUDE, BUT ARE NOT LIMITED TO, COST OF
-REMOVAL OR REINSTALLATION, OUTSIDE COMPUTER TIME, LABOR COSTS, LOSS OR
-CORRUPTION OF DATA, LOSS OF GOODWILL, LOSS OF PROFITS, LOSS OF SAVINGS, OR
-LOSS OF USE OR INTERRUPTION OF BUSINESS OR ANY OTHER ECONOMIC LOSS.  IN NO
-EVENT WILL TI'S AGGREGATE LIABILITY UNDER THIS AGREEMENT OR ARISING OUT OF
-YOUR USE OF THE LICENSED MATERIALS EXCEED FIVE HUNDRED U.S. DOLLARS
-(US$500).
-
-Because some jurisdictions do not allow the exclusion or limitation of
-incidental or consequential damages or limitation on how long an implied
-warranty lasts, the above limitations or exclusions may not apply to you.
-
-5. Export Control.  The Licensed Materials may be subject to the export or
-import regulations of certain countries. You agree to comply with all such
-regulations and acknowledge that you have the responsibility to obtain any
-licenses or other authorizations that may be required to export, re-export
-or import the Licensed Materials.
-
-6. Governing Law, Jurisdiction and Severability.  This Agreement will be
-governed by and interpreted in accordance with the laws of the State of
-Texas, without reference to conflict of laws principles.  If for any reason
-a court of competent jurisdiction finds any provision of the Agreement to be
-unenforceable, that provision will be enforced to the maximum extent
-possible to effectuate the intent of the parties and the remainder of the
-Agreement shall continue in full force and effect. This Agreement shall not
-be governed by the United Nations Convention on Contracts for the
-International Sale of Goods, or by the Uniform Computer Information
-Transactions Act (UCITA). The parties agree that non-exclusive jurisdiction
-for any dispute arising out of or relating to this Agreement lies within the
-courts located in the State of Texas.  Notwithstanding the foregoing, any
-judgment may be enforced in any United States or foreign court, and either
-party may seek injunctive relief in any United States or foreign court.
-Failure by TI to enforce any provision of this Agreement shall not be deemed
-a waiver of future enforcement of that or any other provision in this
-Agreement or any other agreement that may be in place between the parties.
-
-7. PRC Provisions.  If you are located in the People's Republic of China
-("PRC") or if the Licensed Materials will be sent to the PRC, the following
-provisions shall apply:
-
-a. Registration Requirements.  You shall be solely responsible for
-performing all acts and obtaining all approvals that may be required in
-connection with this Agreement by the government of the PRC, including but
-not limited to registering pursuant to, and otherwise complying with, the
-PRC Measures on the Administration of Software Products, Management
-Regulations on Technology Import-Export, and Technology Import and Export
-Contract Registration Management Rules.  Upon receipt of such approvals from
-the government authorities, you shall forward evidence of all such approvals
-to TI for its records.  In the event that you fail to obtain any such
-approval or registration, you shall be solely responsible for any and all
-losses, damages or costs resulting therefrom, and shall indemnify TI for all
-such losses, damages or costs.
-
-b. Governing Language.  This Agreement is written and executed in the
-English language.  If a translation of this Agreement is required for any
-purpose, including but not limited to registration of the Agreement pursuant
-to any governmental laws, regulations or rules, you shall be solely
-responsible for creating such translation.  Any translation of this
-Agreement into a language other than English is intended solely in order to
-comply with such laws or for reference purposes, and the English language
-version shall be authoritative and controlling.
-
-8. Entire Agreement.  This is the entire agreement between you and TI and
-supersedes any prior agreement between the parties related to the subject
-matter of this Agreement. No amendment or modification of this Agreement
-will be effective unless in writing and signed by a duly authorized
-representative of TI.  You hereby warrant and represent that you have
-obtained all authorizations and other applicable consents required
-empowering you to enter into this Agreement.

licenses/Thai-Open-Source-Software-Center

@@ -1,31 +0,0 @@
-Copyright (c) 2002, 2003, 2008 Thai Open Source Software Center Ltd
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions are
-met:
-
-    Redistributions of source code must retain the above copyright
-    notice, this list of conditions and the following disclaimer.
-
-    Redistributions in binary form must reproduce the above copyright
-    notice, this list of conditions and the following disclaimer in
-    the documentation and/or other materials provided with the
-    distribution.
-
-    Neither the name of the Thai Open Source Software Center Ltd nor
-    the names of its contributors may be used to endorse or promote
-    products derived from this software without specific prior written
-    permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR
-CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

recipes-bsp/abefw/abefw_1.0.14.bb

@@ -1,23 +0,0 @@
-SUMMARY = "Firmware for OMAP4 and OMAP5 ABE"
-HOMEPAGE = "http://git.ti.com"
-LICENSE = "BSD | GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=923db086ed9463ab3215b24d87e05ec5"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-COMPATIBLE_MACHINE = "pandaboard|omap5-evm"
-
-SRC_URI = "git://git.ti.com/glsdk/abefw-omap4plus.git;protocol=git"
-
-S = "${WORKDIR}/git"
-
-SRCREV = "ceccc0332264e39bdc51e54f80ea7256a3886c58"
-
-PR = "r0"
-
-do_install() {
-        mkdir -p ${D}/lib/firmware
-        cp ${S}/firmware/omap4_abe_new ${D}/lib/firmware/
-}
-
-FILES_${PN} += "/lib/firmware/omap4_abe_new"

recipes-bsp/aif2-lld/aif2-lld-rtos_git.bb

@@ -1,16 +0,0 @@
-SUMMARY = "TI RTOS low level driver for Antenna Interface"
-
-inherit ti-pdk
-
-require recipes-bsp/aif2-lld/aif2-lld.inc
-
-PR = "${INC_PR}.0"
-
-DEPENDS_append = " qmss-lld-rtos \
-                   cppi-lld-rtos \
-"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-# HTML doc link params
-PDK_COMP_LINK_TEXT = "AIF2 LLD"

recipes-bsp/aif2-lld/aif2-lld-test_git.bb

@@ -1,18 +0,0 @@
-DESCRIPTION = "TI Antenna Interface peripheral module low level driver test binaries"
-
-DEPENDS = "common-csl-ip aif2-lld qmss-lld cppi-lld"
-
-include aif2-lld.inc
-
-PR = "${INC_PR}.0"
-
-EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} AIF2_SRC_DIR=${WORKDIR}/git"
-
-do_compile () {
-    oe_runmake clean DEVICE=k2hk
-    oe_runmake tests DEVICE=k2hk
-}
-
-do_install () {
-    oe_runmake installbin DEVICE=k2hk AIF2_SRC_DIR=${WORKDIR}/git INSTALL_BIN_BASE_DIR=${D}/${bindir}
-}

recipes-bsp/aif2-lld/aif2-lld.inc

@@ -1,22 +0,0 @@
-LICENSE = "BSD-3-Clause"
-
-LIC_FILES_CHKSUM = "file://COPYING.txt;md5=5bdceac872dffdec915b819654ee23ea"
-
-AIF2_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/aif2-lld.git"
-AIF2_LLD_GIT_PROTOCOL = "git"
-AIF2_LLD_GIT_BRANCH = "master"
-AIF2_LLD_GIT_DESTSUFFIX = "git/ti/drv/aif2"
-
-# The following commit correspond to DEV.AIF2LLD.01.02.00.02
-AIF2_LLD_SRCREV = "e0c978cf1de9007c99a67d4683abaece1fca3617"
-
-BRANCH = "${AIF2_LLD_GIT_BRANCH}"
-SRC_URI = "${AIF2_LLD_GIT_URI};destsuffix=${AIF2_LLD_GIT_DESTSUFFIX};protocol=${AIF2_LLD_GIT_PROTOCOL};branch=${BRANCH}"
-SRCREV = "${AIF2_LLD_SRCREV}"
-
-PV = "1.2.0.2"
-INC_PR = "r0"
-
-COMPATIBLE_MACHINE = "k2hk"
-
-S = "${WORKDIR}/${AIF2_LLD_GIT_DESTSUFFIX}"

recipes-bsp/aif2-lld/aif2-lld_git.bb

@@ -1,17 +0,0 @@
-DESCRIPTION = "Antenna Interface low level driver"
-
-DEPENDS = "common-csl-ip qmss-lld cppi-lld"
-
-include aif2-lld.inc
-
-PR = "${INC_PR}.0"
-
-EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}"
-
-do_compile () {
-    oe_runmake lib DEVICE=k2hk
-}
-
-do_install () {
-    oe_runmake install INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
-}

recipes-bsp/arm-trusted-firmware/arm-trusted-firmware_1.5.bb

@@ -1,63 +0,0 @@
-SUMMARY = "ARM Trusted Firmware"
-DESCRIPTION = "ARM Trusted Firmware provides a reference implementation of \
-Secure World software for ARMv8-A, including Exception Level 3 (EL3) software. \
-It provides implementations of various ARM interface standards such as the \
-Power State Coordination Interface (PSCI), Trusted Board Boot Requirements \
-(TBBR) and Secure monitor code."
-HOMEPAGE = "http://infocenter.arm.com/help/topic/com.arm.doc.dui0928e/CJHIDGJF.html"
-
-LICENSE = "BSD"
-LIC_FILES_CHKSUM = "file://license.rst;md5=e927e02bca647e14efd87e9e914b2443"
-
-inherit deploy
-
-DEPENDS += "dtc-native"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-S = "${WORKDIR}/git"
-
-PV_append = "+git${SRCPV}"
-
-BRANCH = "ti-atf"
-SRC_URI = "git://git.ti.com/atf/arm-trusted-firmware.git;branch=${BRANCH}"
-
-SRCREV ?= "d7b4c6e1fdb4553fc23a02776bca111bdcdf6b9f"
-
-# Make ATF "aware" of OPTEE, no build dependency
-PACKAGECONFIG[optee] = "SPD=opteed"
-
-COMPATIBLE_MACHINE = "k3"
-ATFPLATFORM_k3 = "k3"
-ATFBOARD_k3 = "generic"
-
-PACKAGECONFIG_k3 = "optee"
-
-CFLAGS[unexport] = "1"
-LDFLAGS[unexport] = "1"
-AS[unexport] = "1"
-LD[unexport] = "1"
-
-do_configure[noexec] = "1"
-
-EXTRA_OEMAKE = 'CROSS_COMPILE="${TARGET_PREFIX}" PLAT="${ATFPLATFORM}" TARGET_BOARD="${ATFBOARD}" ${PACKAGECONFIG_CONFARGS}'
-
-do_compile() {
-	oe_runmake all
-}
-
-do_install() {
-	install -d ${D}/boot
-	install -m 0644 ${S}/build/${ATFPLATFORM}/${ATFBOARD}/release/bl31.bin ${D}/boot/
-	install -m 0644 ${S}/build/${ATFPLATFORM}/${ATFBOARD}/release/bl31/bl31.elf ${D}/boot/
-}
-
-do_deploy() {
-	install -d ${DEPLOYDIR}
-	install -m 0644 ${S}/build/${ATFPLATFORM}/${ATFBOARD}/release/bl31.bin ${DEPLOYDIR}/
-	install -m 0644 ${S}/build/${ATFPLATFORM}/${ATFBOARD}/release/bl31/bl31.elf ${DEPLOYDIR}/
-}
-addtask deploy before do_build after do_compile
-
-FILES_${PN} = "/boot"
-SYSROOT_DIRS += "/boot"

recipes-bsp/audk2g-addon/audk2g-addon-rtos_git.bb

@@ -1,38 +0,0 @@
-SUMMARY = "TI RTOS Audio add-on software for k2g"
-
-inherit ti-pdk
-
-LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://audk2gaddonver.h;beginline=8;endline=47;md5=7a3996aaf1a3d3ca87358cf9b89bce3d"
-
-COMPATIBLE_MACHINE = "k2g"
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-AUDK2G_ADDON_GIT_URI = "git://git.ti.com/processor-sdk/audk2g-addon.git"
-AUDK2G_ADDON_GIT_PROTOCOL = "git"
-AUDK2G_ADDON_GIT_BRANCH = "master"
-AUDK2G_ADDON_GIT_DESTSUFFIX = "git/ti/addon/audk2g"
-
-# Below commit ID corresponds to "DEV.AUDK2G.01.04.00.00"
-AUDK2G_ADDON_SRCREV = "815180b45ceb1fa3c110f9979106c7f5aa8b3ca2"
-
-BRANCH = "${AUDK2G_ADDON_GIT_BRANCH}"
-SRC_URI = "${AUDK2G_ADDON_GIT_URI};destsuffix=${AUDK2G_ADDON_GIT_DESTSUFFIX};protocol=${AUDK2G_ADDON_GIT_PROTOCOL};branch=${BRANCH}"
-
-SRCREV = "${AUDK2G_ADDON_SRCREV}"
-PV = "01.04.00.00"
-PR = "r0"
-
-S = "${WORKDIR}/git/ti/addon/audk2g"
-
-DEPENDS_append = " ti-sysbios \
-            gpio-lld-rtos \
-            i2c-lld-rtos \
-            board-rtos \
-"
-
-export PDK_AUDK2G_ROOT_PATH = "${WORKDIR}/build"
-export DEST_ROOT="${S}"
-
-# Build with make instead of XDC
-TI_PDK_XDCMAKE = "0"

recipes-bsp/bcp-lld/bcp-lld-rtos_git.bb

@@ -1,33 +0,0 @@
-SUMMARY = "TI Bit Coprocessor (BCP) low level driver"
-
-inherit ti-pdk
-
-LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://bcp.h;beginline=1;endline=40;md5=4f6e6128dd075a89548c0287a39b8896"
-
-COMPATIBLE_MACHINE = "k2hk|k2l|c667x-evm"
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-BCP_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/bcp-lld.git"
-BCP_LLD_GIT_PROTOCOL = "git"
-BCP_LLD_GIT_BRANCH = "master"
-BCP_LLD_GIT_DESTSUFFIX = "git/ti/drv/bcp"
-
-# Below commit ID corresponds to "DEV.BCP_LLD.02.01.00.07"
-BCP_LLD_SRCREV = "84c34a7e79a017c39319daa453cea6ea1b45751c"
-
-BRANCH = "${BCP_LLD_GIT_BRANCH}"
-SRC_URI = "${BCP_LLD_GIT_URI};destsuffix=${BCP_LLD_GIT_DESTSUFFIX};protocol=${BCP_LLD_GIT_PROTOCOL};branch=${BRANCH}"
-
-SRCREV = "${BCP_LLD_SRCREV}"
-PV = "02.01.00.07"
-PR = "r0"
-
-S = "${WORKDIR}/${BCP_LLD_GIT_DESTSUFFIX}"
-
-DEPENDS_append = " qmss-lld-rtos \
-                   cppi-lld-rtos \
-"
-
-# HTML doc link params
-PDK_COMP_LINK_TEXT = "BCP LLD"

recipes-bsp/board-rtos/board-rtos_git.bb

@@ -1,82 +0,0 @@
-SUMMARY = "TI RTOS Board Library"
-
-inherit ti-pdk
-
-LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://board.h;beginline=1;endline=32;md5=9bed8e4ac2fb37fc627cefe49eb1c919"
-
-COMPATIBLE_MACHINE = "ti33x|ti43x|omap-a15|keystone|omapl1|c66x|k3"
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-BOARD_GIT_URI = "git://git.ti.com/keystone-rtos/board.git"
-BOARD_GIT_PROTOCOL = "git"
-BOARD_GIT_BRANCH = "master"
-
-# Below commit ID corresponds to "DEV.BOARD.01.00.10.02"
-BOARD_SRCREV = "60bde3650d067e4064f93c292c8d9108aa1bf57b"
-
-BRANCH ="${BOARD_GIT_BRANCH}"
-SRC_URI = "${BOARD_GIT_URI};protocol=${BOARD_GIT_PROTOCOL};branch=${BRANCH}"
-
-SRCREV = "${BOARD_SRCREV}"
-PV = "01.00.10.02"
-PR = "r0"
-
-DEPENDS_append = " i2c-lld-rtos \
-                   spi-lld-rtos \
-                   uart-lld-rtos \
-"
-
-DEPENDS_append_omap-a15 = " osal-rtos \
-                            ti-ndk \
-                            mmcsd-lld-rtos \
-                            pm-lld-rtos \
-"
-
-DEPENDS_append_am57xx-evm = " gpio-lld-rtos \
-                              icss-emac-lld-rtos \
-                              pruss-lld-rtos \
-"
-
-
-DEPENDS_append_ti33x = " gpio-lld-rtos \
-                         gpmc-lld-rtos \
-                         icss-emac-lld-rtos \
-                         mmcsd-lld-rtos \
-                         osal-rtos \
-                         pruss-lld-rtos \
-                         starterware-rtos \
-                         ti-ndk \
-"
-
-DEPENDS_append_ti43x = " gpio-lld-rtos \
-                         gpmc-lld-rtos \
-                         icss-emac-lld-rtos \
-                         mmcsd-lld-rtos \
-                         osal-rtos \
-                         pruss-lld-rtos \
-                         starterware-rtos \
-                         ti-ndk \
-"
-
-DEPENDS_append_dra7xx = " pm-lld-rtos \
-                          mmcsd-lld-rtos \
-"
-
-DEPENDS_append_k3 = " sciclient-rtos \
-                              pm-lld-rtos \
-"
-
-
-# Build with make instead of XDC
-TI_PDK_XDCMAKE = "0"
-
-INHIBIT_SYSROOT_STRIP = "1"
-INHIBIT_PACKAGE_STRIP = "1"
-
-export PDK_BOARD_ROOT_PATH ="${WORKDIR}/build"
-export DEST_ROOT="${S}"
-
-XDCPATH_append = ";${PDK_INSTALL_DIR}/packages/ti/csl;${NDK_INSTALL_DIR}/packages"
-
-INSANE_SKIP_${PN} = "arch"

recipes-bsp/boot-monitor/boot-monitor_git.bb

@@ -1,47 +1,39 @@
 DESCRIPTION = "Boot Monitor - TI ARM Boot monitor code"
+EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}"
+
 LICENSE = "BSD"
+
+BOOT_MONITOR_BINARY ?= "skern.bin"
+BOOT_MONITOR_IMAGE  ?= "skern-${MACHINE}.bin"
+BOOT_MONITOR_MAKE_TARGET  ?= "all"
+
 LIC_FILES_CHKSUM = "file://COPYING;md5=25fe219a6febf6e5bb45beda1b2eb315"
 
-COMPATIBLE_MACHINE = "keystone"
-PACKAGE_ARCH = "${MACHINE_ARCH}"
+COMPATIBLE_MACHINE = "keystone-evm"
 
-DEPENDS = "u-boot-mkimage-native"
+SRC_URI = "git://arago-project.org/git/projects/boot-monitor.git;protocol=git;branch=${BRANCH}"
 
-SRC_URI = "git://git.ti.com/processor-firmware/ks2-boot-monitor.git;protocol=git;branch=${BRANCH}"
-
-PV = "4.0+git${SRCPV}"
+PV = "1.0"
+PR = "r1+gitr${SRCPV}"
 
 BRANCH = "master"
 
 S = "${WORKDIR}/git"
 
-SRCREV = "e1f885ab6dc544884728e333cc6e396f7eb08286"
-
-BOOT_MONITOR_IMAGE  ?= "skern-${BOOT_MONITOR_MAKE_TARGET}.bin"
-
-FLOATABI = "${@bb.utils.contains("TUNE_FEATURES", "vfp", bb.utils.contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
-
-EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}" LD="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}""
-
-FILES_${PN} = "/boot"
-
-inherit deploy
+SRCREV = "DEV.MCSDK-03.00.00.07"
 
 do_compile () {
 	unset LDFLAGS
 	unset CFLAGS
 	unset CPPFLAGS
-	oe_runmake image_${BOOT_MONITOR_MAKE_TARGET}
+	oe_runmake ${BOOT_MONITOR_MAKE_TARGET}
 }
 
-do_install () {
-	install -d ${D}/boot
-	install -m 0644 ${S}/${BOOT_MONITOR_IMAGE} ${D}/boot/
-}
+inherit deploy
+
+addtask deploy before do_build after do_compile
 
 do_deploy () {
 	install -d ${DEPLOYDIR}
-	install -m 0644 ${S}/${BOOT_MONITOR_IMAGE} ${DEPLOYDIR}/
+	install ${S}/${BOOT_MONITOR_BINARY} ${DEPLOYDIR}/${BOOT_MONITOR_IMAGE}
 }
-
-addtask deploy before do_build after do_compile

recipes-bsp/bt-fw/bt-fw_git.bb

@@ -1,24 +0,0 @@
-DESCRIPTION = "Firmware files for Bluetooth"
-LICENSE = "TI-TSPA"
-LIC_FILES_CHKSUM = "file://LICENSE;md5=f39eac9f4573be5b012e8313831e72a9"
-
-PV = "8.7.1+git${SRCPV}"
-
-CLEANBROKEN = "1"
-
-SRCREV = "0ee619b598d023fffc77679f099bc2a4815510e4"
-BRANCH = "master"
-SRC_URI = "git://git.ti.com/ti-bt/service-packs.git;branch=${BRANCH}"
-
-S = "${WORKDIR}/git"
-
-do_compile() {
-    :
-}
-
-do_install() {
-    install -d ${D}${base_libdir}/firmware/ti-connectivity
-    oe_runmake "DEST_DIR=${D}" "BASE_LIB_DIR=${base_libdir}" install
-}
-
-FILES_${PN} += "${base_libdir}/firmware/ti-connectivity/*"

recipes-bsp/cm3-pm-firmware/amx3-cm3_git.bb

@@ -1,28 +0,0 @@
-DESCRIPTION = "Cortex-M3 binary blob for suspend-resume"
-
-LICENSE = "TI-TSPA"
-LIC_FILES_CHKSUM = "file://License.txt;md5=7bdc54a749ab7a7dea999d25d99a41b8"
-
-PV = "1.9.2"
-PR = "r0"
-
-SRCREV = "7eb9c0856a9e8b3b42bf64f761da135852b8eea7"
-BRANCH ?= "ti-v4.1.y"
-
-SRC_URI = "git://git.ti.com/processor-firmware/ti-amx3-cm3-pm-firmware.git;protocol=git;branch=${BRANCH}"
-
-S = "${WORKDIR}/git"
-
-FLOATABI = "${@bb.utils.contains("TUNE_FEATURES", "vfp", bb.utils.contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
-
-do_compile() {
-	make CROSS_COMPILE="${TARGET_PREFIX}" CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI} ${SECURITY_NOPIE_CFLAGS}"
-}
-
-do_install() {
-	install -d ${D}${base_libdir}/firmware
-	install -m 0644 bin/am335x-pm-firmware.elf ${D}${base_libdir}/firmware/
-	install -m 0644 bin/*-scale-data.bin ${D}${base_libdir}/firmware/
-}
-
-FILES_${PN} += "${base_libdir}/firmware"

recipes-bsp/cmb-addon/cmb-addon-rtos_git.bb

@@ -1,41 +0,0 @@
-SUMMARY = "TI RTOS software supporting circular microphone array board"
-
-inherit ti-pdk
-
-LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://cmbaddonver.h;beginline=8;endline=47;md5=d0cb159bf210cfafed63042da01c83e0"
-
-COMPATIBLE_MACHINE = "k2g|omapl137-evm"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-CMB_ADDON_GIT_URI = "git://git.ti.com/processor-sdk/circmicarray-addon.git"
-CMB_ADDON_GIT_PROTOCOL = "git"
-CMB_ADDON_GIT_BRANCH = "master"
-CMB_ADDON_GIT_DESTSUFFIX = "git/ti/addon"
-
-# Below commit ID corresponds to "DEV.CMB.01.01.00.02"
-CMB_ADDON_SRCREV = "0bcfbb40f1d671206f8cad04aac4e6bf548af21e"
-
-SRCREV = "${CMB_ADDON_SRCREV}"
-PV = "01.01.00.02"
-PR = "r0"
-
-BRANCH = "${CMB_ADDON_GIT_BRANCH}"
-SRC_URI = "${CMB_ADDON_GIT_URI};destsuffix=${CMB_ADDON_GIT_DESTSUFFIX};protocol=${CMB_ADDON_GIT_PROTOCOL};branch=${BRANCH}"
-
-
-S = "${WORKDIR}/git/ti/addon/cmb"
-
-DEPENDS_append = " ti-sysbios \
-            gpio-lld-rtos \
-            i2c-lld-rtos \
-            mcasp-lld-rtos \
-            board-rtos \
-"
-
-export PDK_CMB_ROOT_PATH = "${WORKDIR}/build"
-export DEST_ROOT="${S}"
-
-# Build with make instead of XDC
-TI_PDK_XDCMAKE = "0"

recipes-bsp/cmem/cmem-mod_git.bb

@@ -1,18 +0,0 @@
-DESCRIPTION = "Kernel module for contiguous memory allocation from userspace"
-
-include cmem.inc
-
-# This package builds a kernel module, use kernel PR as base and append a local
-MACHINE_KERNEL_PR_append = "a"
-PR = "${MACHINE_KERNEL_PR}"
-
-inherit module
-
-EXTRA_OEMAKE += '-f lu.mak KERNEL_INSTALL_DIR="${STAGING_KERNEL_DIR}" TOOLCHAIN_PREFIX="${TOOLCHAIN_PREFIX}" EXEC_DIR="${D}/lib/modules/${KERNEL_VERSION}/extra"'
-MAKE_TARGETS = "module"
-
-KERNEL_MODULE_AUTOLOAD += "cmemk"
-
-do_install_prepend() {
-    cp ${B}/src/cmem/module/Module.symvers ${B}/ || true
-}

recipes-bsp/cmem/cmem.inc

@@ -1,14 +0,0 @@
-HOMEPAGE = "http://processors.wiki.ti.com/index.php/Category:CMEM"
-
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://include/ti/cmem.h;beginline=1;endline=30;md5=26be509e4bb413905bda8309e338e2b1"
-
-BRANCH = "master"
-# This corresponds to version 4.15.00.02
-SRCREV = "0f39ed469f7c327cb0b03139976b511c337c7f6a"
-
-PV = "4.15.00.02+git${SRCPV}"
-
-SRC_URI = "git://git.ti.com/ipc/ludev.git;protocol=git;branch=${BRANCH}"
-
-S = "${WORKDIR}/git"

recipes-bsp/cmem/cmem_git.bb

@@ -1,13 +0,0 @@
-DESCRIPTION = "The cmem component supports contiguous memory allocation from userspace"
-
-include cmem.inc
-
-RDEPENDS_${PN} = "cmem-mod"
-
-PR = "r0"
-
-PACKAGES =+ "${PN}-test"
-
-FILES_${PN}-test = "${bindir}/*"
-
-inherit autotools

recipes-bsp/common-csl-ip/common-csl-ip-rtos_git.bb

@@ -1,21 +0,0 @@
-require common-csl-ip.inc
-PR = "${INC_PR}.6"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-COMPATIBLE_MACHINE_append = "|c66x|k3"
-
-inherit ti-pdk
-
-DEPENDS_remove = "${PN}"
-
-# Build with make instead of XDC
-TI_PDK_XDCMAKE = "0"
-
-export PDK_CSL_ROOT_PATH ="${WORKDIR}/build"
-export DEST_ROOT="${S}"
-
-# HTML doc link params
-PDK_COMP_LINK_TEXT = "CSL-Chip Support Library"
-
-# Workaround: dra7xx build requires am57xx CSL libraries for opencl-monitor
-TI_PDK_LIMIT_SOCS_append_dra7xx = " am571x am572x am574x"

recipes-bsp/common-csl-ip/common-csl-ip.inc

@@ -1,23 +0,0 @@
-DESCRIPTION = "Chip support library low level interface"
-LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://COPYING.txt;md5=5857833e20836213677fac33f9aded21"
-
-COMPATIBLE_MACHINE = "keystone|dra7xx|ti33x|ti43x|omapl1"
-
-PV = "03.03.00.12A"
-INC_PR = "r0"
-PE = "1"
-
-CSL_GIT_URI = "git://git.ti.com/keystone-rtos/common-csl-ip.git"
-CSL_GIT_PROTOCOL ="git"
-CSL_GIT_BRANCH = "master"
-CSL_GIT_DESTSUFFIX = "git"
-
-# Below commit ID corresponding to "DEV.CSL_PROCESSOR-SDK.03.03.00.12A"
-CSL_SRCREV = "852cfe681c766a2096007fee37358c0782194897"
-
-BRANCH="${CSL_GIT_BRANCH}"
-SRC_URI = "${CSL_GIT_URI};protocol=${CSL_GIT_PROTOCOL};branch=${BRANCH};destsuffix=${CSL_GIT_DESTSUFFIX}"
-SRCREV = "${CSL_SRCREV}"
-
-S = "${WORKDIR}/${CSL_GIT_DESTSUFFIX}"

recipes-bsp/common-csl-ip/common-csl-ip_git.bb

@@ -1,17 +0,0 @@
-require common-csl-ip.inc
-
-PR = "${INC_PR}.0"
-
-ALLOW_EMPTY_${PN} = "1"
-
-CLEANBROKEN = "1"
-
-do_compile() {
-    :
-}
-
-do_install () {
-    install -d ${D}${includedir}/ti/csl
-    find . -name "*.h" -type f | xargs -I {} cp --parents {} ${D}${includedir}/ti/csl
-    find ./src/ip/serdes_sb/V0 -name "*.c" -type f | xargs -I {} cp --parents {} ${D}${includedir}/ti/csl
-}

recipes-bsp/cppi-lld/cppi-lld-rtos_git.bb

@@ -1,10 +0,0 @@
-inherit ti-pdk
-require cppi-lld.inc
-
-PR = "${INC_PR}.1"
-
-COMPATIBLE_MACHINE_append = "|c66x"
-
-DEPENDS_append = " rm-lld-rtos \
-                   qmss-lld-rtos \
-"

recipes-bsp/cppi-lld/cppi-lld-test_git.bb

@@ -1,27 +0,0 @@
-DESCRIPTION = "TI CPPI low level driver unit test and example binaries"
-DEPENDS = "common-csl-ip rm-lld cppi-lld qmss-lld"
-
-include cppi-lld.inc
-
-PR = "${INC_PR}.0"
-
-CHOICELIST = "yes no"
-
-do_compile () {
-#   Now build the lld in the updated directory
-	for device in ${DEVICELIST}
-	do
-		make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S}
-		for choice in ${CHOICELIST}
-		do
-			make -f makefile_armv7 tests examples PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S} USEDYNAMIC_LIB="$choice"
-		done
-	done
-}
-
-do_install () {
-	for device in ${DEVICELIST}
-do
-	make -f makefile_armv7 installbin PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S} INSTALL_BIN_BASE_DIR=${D}${bindir}
-	done
-}

recipes-bsp/cppi-lld/cppi-lld.inc

@@ -1,27 +0,0 @@
-LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/drv/cppi/COPYING.txt;md5=e8f6789acdcda76d02ed9203fc2e603d"
-
-COMPATIBLE_MACHINE = "keystone"
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-CPPI_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/cppi-lld.git"
-CPPI_LLD_GIT_PROTOCOL = "git"
-CPPI_LLD_GIT_BRANCH = "master"
-CPPI_LLD_GIT_DESTSUFFIX = "git/ti/drv/cppi"
-
-# Below Commit ID corresponds to "DEV.CPPI_LLD.02.01.00.13"
-CPPI_LLD_SRCREV = "e9c498fe581b502415123a8e3dd7c0a08be03958"
-
-BRANCH = "${CPPI_LLD_GIT_BRANCH}"
-SRC_URI = "${CPPI_LLD_GIT_URI};destsuffix=${CPPI_LLD_GIT_DESTSUFFIX};protocol=${CPPI_LLD_GIT_PROTOCOL};branch=${BRANCH}"
-
-SRCREV = "${CPPI_LLD_SRCREV}"
-PV = "02.01.00.13"
-INC_PR = "r0"
-
-DEVICELIST = "k2h k2k k2l k2e"
-DEVICELIST_k2hk = "k2h k2k"
-DEVICELIST_k2l  = "k2l"
-DEVICELIST_k2e  = "k2e"
-
-S = "${WORKDIR}/${CPPI_LLD_GIT_DESTSUFFIX}"

recipes-bsp/cppi-lld/cppi-lld_git.bb

@@ -1,32 +0,0 @@
-DESCRIPTION = "TI CPPI Module low level driver"
-
-DEPENDS = "common-csl-ip rm-lld qmss-lld"
-
-include cppi-lld.inc
-
-PR = "${INC_PR}.1"
-
-do_compile () {
-#   Now build the lld in the updated directory
-	make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR}
-	for device in ${DEVICELIST}
-	do
-		make -f makefile_armv7 lib PDK_INSTALL_PATH=${STAGING_INCDIR}  DEVICE="${device}"
-	done
-}
-
-do_install () {
-    make -f makefile_armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
-    chown -R root:root ${D}
-
-#   Set the generic device library symbolic link to default k2h
-    cd ${D}${libdir}
-
-    # Link only the first device in the list
-    for device in ${DEVICELIST}
-    do
-        ln -sf libcppi_${device}.so.1.0.0 libcppi_device.so.1
-        break
-    done
-    ln -sf libcppi_device.so.1 libcppi_device.so
-}

recipes-bsp/cuia/cuia_1.0.0.13.bb

@@ -1,25 +0,0 @@
-DESCRIPTION = "TI Unified Instrumentation Architecture in C (cUIA)"
-LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://cuia_${CUIA_PV}_manifest.html;md5=0eea94e3bb94de4ddee77653eba1c7c5"
-
-CUIA_PV = "1_00_00_13"
-CUIA_PVExtra = ""
-
-SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_ccstudio/UIA/SCMCSDK/cuia_${CUIA_PV}${CUIA_PVExtra}.tar.gz;name=cuia"
-SRC_URI[cuia.md5sum] = "ef53989ac70c191841cd656cdc8770be"
-SRC_URI[cuia.sha256sum] = "f16d138a9146fdc7d52cba77bd30596da65835f6ffe4092baf2b33d1c1a4fb0d"
-
-S = "${WORKDIR}/cuia_${CUIA_PV}${CUIA_PVExtra}"
-
-CLEANBROKEN = "1"
-
-do_compile () {
-	cd ${S}
-	oe_runmake clean
-	oe_runmake all
-}
-
-do_install() {
-	cd ${S}
-	oe_runmake DESTDIR=${D} libdir=${libdir} includedir=${includedir} install
-}

recipes-bsp/dfe-lld/dfe-lld-rtos_git.bb

@@ -1,12 +0,0 @@
-SUMMARY = "TI RTOS level driver for Digital Radio Front End"
-
-inherit ti-pdk
-
-require recipes-bsp/dfe-lld/dfe-lld.inc
-
-PR = "${INC_PR}.0"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-# HTML doc link params
-PDK_COMP_LINK_TEXT = "DFE LLD"

recipes-bsp/dfe-lld/dfe-lld-test_git.bb

@@ -1,20 +0,0 @@
-DESCRIPTION = "TI Digital Radio Front End lld test application"
-
-DEPENDS = "common-csl-ip dfe-lld iqn2-lld"
-
-include dfe-lld.inc
-
-PR = "${INC_PR}.0"
-
-EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} DFE_SRC_DIR=${S}"
-
-do_compile () {
-#   Now build the lld in the updated directory
-	oe_runmake clean DEVICE=k2l
-	oe_runmake tests DEVICE=k2l
-	oe_runmake tests DEVICE=k2l USEDYNAMIC_LIB=yes
-}
-
-do_install () {
-	oe_runmake installbin INSTALL_BIN_BASE_DIR=${D}/${bindir}
-}

recipes-bsp/dfe-lld/dfe-lld.inc

@@ -1,22 +0,0 @@
-LICENSE = "BSD-3-Clause"
-
-LIC_FILES_CHKSUM = "file://COPYING.txt;md5=1f4217b705bf98762a302fd720649dcc"
-
-DFE_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/dfe-lld.git"
-DFE_LLD_GIT_PROTOCOL = "git"
-DFE_LLD_GIT_BRANCH = "master"
-DFE_LLD_GIT_DESTSUFFIX = "git/ti/drv/dfe"
-
-# Below commit ID corresponds to "DEV.DFE_LLD.01.00.00.09"
-DFE_LLD_SRCREV = "da6a84069837b5c9b7a4bdb8824d8a4295866b14"
-
-BRANCH = "${DFE_LLD_GIT_BRANCH}"
-SRC_URI = "${DFE_LLD_GIT_URI};destsuffix=${DFE_LLD_GIT_DESTSUFFIX};protocol=${DFE_LLD_GIT_PROTOCOL};branch=${BRANCH}"
-SRCREV = "${DFE_LLD_SRCREV}"
-
-PV = "1.0.0.9"
-INC_PR = "r0"
-
-COMPATIBLE_MACHINE = "k2l"
-
-S = "${WORKDIR}/${DFE_LLD_GIT_DESTSUFFIX}"

recipes-bsp/dfe-lld/dfe-lld_git.bb

@@ -1,18 +0,0 @@
-DESCRIPTION = "Digital Radio Front End low level driver"
-
-DEPENDS = "common-csl-ip"
-
-include dfe-lld.inc
-
-PR = "${INC_PR}.0"
-
-EXTRA_OEMAKE = "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR}"
-
-do_compile () {
-	oe_runmake lib DEVICE=k2l
-}
-
-do_install () {
-	oe_runmake install INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
-	chown -R root:root ${D}
-}

recipes-bsp/dspdce-fw/dspdce-fw_git.bb

@@ -1,61 +0,0 @@
-DESCRIPTION = "Firmware for DSP for an example application called copycodectest"
-LICENSE = "TI-TSPA"
-LIC_FILES_CHKSUM = "file://src/ti/framework/dce/dce.c;startline=1;endline=31;md5=2c6e9aba6ed75f22b1a2b7544b1c809d"
-
-COMPATIBLE_MACHINE = "dra7xx"
-
-SRC_URI = "git://git.ti.com/glsdk/dspdce.git;protocol=git"
-
-SRCREV = "de6e599f067b25c46cc0c8f74a22cc3b8aafbae8"
-
-PV = "1.00.00.07"
-
-S = "${WORKDIR}/git"
-
-require recipes-ti/includes/ti-paths.inc
-
-PR = "r4"
-inherit update-alternatives
-
-DEPENDS = "ti-xdctools-native ti-sysbios ti-codec-engine ti-framework-components ti-xdais ti-ipc-rtos ti-osal ti-cgt6x-native"
-
-export HWVERSION = "ES10"
-export BIOSTOOLSROOT = "${STAGING_DIR_TARGET}/usr/share/ti"
-
-export XDCVERSION = "ti-xdctools-tree"
-export BIOSVERSION = "ti-sysbios-tree"
-export IPCVERSION = "ti-ipc-tree"
-export CEVERSION = "ti-codec-engine-tree"
-export FCVERSION = "ti-framework-components-tree"
-export XDAISVERSION = "ti-xdais-tree"
-export OSALVERSION = "ti-osal-tree"
-
-export IPCSRC = "${STAGING_DIR_TARGET}/usr/share/ti/ti-ipc-tree"
-export C66XCGTOOLSPATH = "${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x"
-
-do_configure() {
-    cd ${S}
-    make unconfig
-    make vayu_config
-}
-
-do_compile() {
-    cd ${S}
-    make dspbin
-}
-
-TARGET = "dra7-dsp1-fw.xe66"
-
-do_install() {
-    install -d ${D}${base_libdir}/firmware
-    install -m 0644 ${S}/dra7xx-c66x-dsp.xe66 ${D}${base_libdir}/firmware/${TARGET}.${BPN}
-}
-
-ALTERNATIVE_${PN} = "dra7-dsp1-fw.xe66"
-ALTERNATIVE_LINK_NAME[dra7-dsp1-fw.xe66] = "${base_libdir}/firmware/${TARGET}"
-ALTERNATIVE_TARGET[dra7-dsp1-fw.xe66] = "${base_libdir}/firmware/${TARGET}.${BPN}"
-ALTERNATIVE_PRIORITY = "10"
-
-INSANE_SKIP_${PN} = "arch"
-
-FILES_${PN} += "${base_libdir}/firmware/*"

recipes-bsp/dsptop/debugss-module-drv_git.bb

@@ -1,24 +0,0 @@
-DESCRIPTION = "Debug Sub-System (DebugSS) driver for Keystone and DRA7xx devices"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING.txt;md5=9d4316fe434ba450dca4da25348ca5a3"
-
-# This package builds a kernel module, use kernel PR as base and append a local
-MACHINE_KERNEL_PR_append = "d"
-PR = "${MACHINE_KERNEL_PR}"
-PV_append = "+git${SRCPV}"
-
-S = "${WORKDIR}/git/debugss_module/debugss-mod"
-
-inherit module
-
-PLATFORM = ""
-PLATFORM_dra7xx = "DRA7xx_PLATFORM"
-PLATFORM_keystone = "KEYSTONE_PLATFORM"
-PLATFORM_k2e = "K2E_PLATFORM"
-
-EXTRA_OEMAKE = "'PLATFORM=${PLATFORM}' KVERSION=${KERNEL_VERSION} KERNEL_SRC=${STAGING_KERNEL_DIR}"
-
-COMPATIBLE_MACHINE = "dra7xx|keystone"
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-include dsptop.inc

recipes-bsp/dsptop/dsptop.inc

@@ -1,8 +0,0 @@
-# This corresponds to version 1.4.0
-SRCREV = "0aedcabdbbcbfc7558f70fc50afc95583302a087"
-PV = "1.4.0"
-INC_PR = "r0"
-
-SRC_URI = "git://git.ti.com/sdo-emu/dsptop.git;protocol=git;branch=${BRANCH}"
-
-BRANCH = "master"

recipes-bsp/dsptop/dsptop_git.bb

@@ -1,29 +0,0 @@
-DESCRIPTION = "TI dsptop utility."
-LICENSE = "BSD"
-LIC_FILES_CHKSUM = "file://debian/copyright;md5=309825aa8f5edfcf2c44912ac094b979"
-
-DEPENDS = "libulm ncurses"
-
-PR = "${INC_PR}.2"
-
-S = "${WORKDIR}/git/dsptop"
-
-DEVICE = ""
-DEVICE_dra7xx = "DRA7xx"
-DEVICE_keystone = "C66AK2Hxx"
-
-EXTRA_OEMAKE = "release DEVICE=${DEVICE} CROSS_COMPILE=${TARGET_PREFIX} CC="${CC}""
-
-do_install() {
-    oe_runmake install DESTDIR=${D}
-}
-
-COMPATIBLE_MACHINE = "dra7xx|keystone"
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-RDEPENDS_${PN} = "debugss-module-drv bash"
-RDEPENDS_${PN}_append_keystone = " temperature-module-drv"
-
-include dsptop.inc
-
-PARALLEL_MAKE = ""

recipes-bsp/dsptop/libulm_git.bb

@@ -1,42 +0,0 @@
-DESCRIPTION = "TI dsptop utility."
-LICENSE = "BSD"
-LIC_FILES_CHKSUM = "file://../debian/copyright;md5=309825aa8f5edfcf2c44912ac094b979"
-
-DEPENDS = "ti-cgt6x-native"
-PR = "${INC_PR}.0"
-
-S = "${WORKDIR}/git/dsptop/ulm"
-
-DEVICE=""
-DEVICE_dra7xx = "DRA7xx"
-DEVICE_keystone = "C66AK2Hxx"
-
-EXTRA_OEMAKE = "release DEVICE=${DEVICE} CROSS_COMPILE=${TARGET_PREFIX}"
-
-do_compile() {
-    oe_runmake arm XPORT_ONLY CC="${CC}"
-    oe_runmake dsp C6X_C_DIR=${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x/include
-}
-
-do_install() {
-    install -d ${D}${includedir}
-    install -d ${D}${libdir}
-    install -d ${D}${datadir}/ti/ulm
-    cp -f tiulm.h ${D}${includedir}
-    cp -f release/libtiulm.a ${D}${libdir}
-    cp -f tiulm.h ${D}${datadir}/ti/ulm
-    cp -f release/libtiulm.ae66 ${D}${datadir}/ti/ulm
-}
-
-COMPATIBLE_MACHINE = "dra7xx|keystone"
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-FILES_${PN}-dev += "\
-    ${datadir}/ti/ulm \
-"
-
-include dsptop.inc
-
-ALLOW_EMPTY_${PN} = "1"
-
-PARALLEL_MAKE= ""

recipes-bsp/dsptop/temperature-module-drv_git.bb

@@ -1,18 +0,0 @@
-DESCRIPTION = "Smart Reflex Sub-System (SRSS) module driver for Keystone devices"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING.txt;md5=9d4316fe434ba450dca4da25348ca5a3"
-
-# This package builds a kernel module, use kernel PR as base and append a local
-MACHINE_KERNEL_PR_append = "a"
-PR = "${MACHINE_KERNEL_PR}"
-PV_append = "+git${SRCPV}"
-
-S = "${WORKDIR}/git/temperature_module/temperature-mod"
-
-inherit module
-
-EXTRA_OEMAKE = "KVERSION=${KERNEL_VERSION} KERNEL_SRC=${STAGING_KERNEL_DIR}"
-
-COMPATIBLE_MACHINE = "keystone"
-
-include dsptop.inc

recipes-bsp/edma3-lld/edma3-lld-rtos_git.bb

@@ -1,145 +0,0 @@
-require edma3-lld.inc
-require recipes-ti/includes/ti-paths.inc
-
-PR = "${INC_PR}.1"
-
-DEPENDS = "ti-sysbios ti-xdctools-native gcc-arm-none-eabi-native ti-cgt-arm-native ti-cgt6x-native"
-
-COMPATIBLE_MACHINE = "ti33x|ti43x|omap-a15|keystone|c66x|omapl1"
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-PLATFORMLIST = ""
-TARGETLIST = ""
-
-PLATFORMLIST_ti33x = " \
-        am335x-evm \
-"
-
-TARGETLIST_ti33x = " \
-        a8 \
-"
-
-PLATFORMLIST_ti43x = " \
-        am437x-evm \
-"
-
-TARGETLIST_ti43x = " \
-        arm9 \
-"
-
-PLATFORMLIST_omap-a15 = " \
-        tda2xx-evm \
-"
-
-TARGETLIST_omap-a15 = " \
-        66 \
-        a15 \
-        m4 \
-"
-
-PLATFORMLIST_keystone = " \
-        tci6636k2h-evm \
-        tci6638k2k-evm \
-        tci6630k2l-evm \
-        c66ak2e-evm \
-        tci66ak2g02-evm \
-"
-
-TARGETLIST_keystone = " \
-        66 \
-        a15 \
-"
-
-PLATFORMLIST_append_dra7xx-evm = " \
-        tda3xx-evm \
-"
-
-TARGETLIST_c66x = " \
-        66 \
-"
-
-PLATFORMLIST_c665x-evm = " \
-        c6657-evm \
-"
-
-PLATFORMLIST_c667x-evm = " \
-        c6678-evm \
-"
-
-PLATFORMLIST_omapl1 = " \
-        omapl137-evm \
-        omapl138-evm \
-"
-
-TARGETLIST_omapl1 = " \
-        arm9 \
-        674 \
-"
-
-EXTRA_OEMAKE_remove = "TARGET=66"
-FORMAT="ELF"
-
-S = "${WORKDIR}/git"
-
-PARALLEL_MAKE = ""
-
-export C6X_GEN_INSTALL_PATH = "${STAGING_DIR_NATIVE}/usr"
-export XDCCGROOT = "${STAGING_DIR_NATIVE}/usr/share/ti/cgt-c6x"
-export CGTOOLS = "${XDCCGROOT}"
-export CGTOOLS_ELF = "${XDCCGROOT}"
-export CODEGEN_PATH_DSP = "${XDCCGROOT}"
-export CODEGEN_PATH_DSPELF = "${XDCCGROOT}"
-export TMS470_CGTOOLS = "${M4_TOOLCHAIN_INSTALL_DIR}"
-export UTILS_INSTALL_DIR = "${XDC_INSTALL_DIR}"
-export XDCPATH = "${XDCCGROOT}/include;${XDC_INSTALL_DIR}/packages;${SYSBIOS_INSTALL_DIR}/packages"
-export PATH := "${XDC_INSTALL_DIR}:${PATH}"
-export ROOTDIR="${S}"
-export INTERNAL_SW_ROOT="${S}"
-export CROSSCC="${TARGET_PREFIX}gcc"
-export CROSSAR="${TARGET_PREFIX}ar"
-export CROSSLNK="${TARGET_PREFIX}gcc"
-
-do_configure () {
-    rm -rf ${S}/examples/edma3_driver/evmTCI6614
-    rm -rf ${S}/examples/edma3_driver/evmTCI6614BE
-    sed -i -e "s|_config.bld|config.bld|g" ${S}/makerules/env.mk
-    sed -i -e "s|^edma3_lld_PATH =.*$|edma3_lld_PATH = ${S}|g" ${S}/makerules/env.mk
-    sed -i -e "s|^CODEGEN_PATH_M3 =.*$|CODEGEN_PATH_M3 = ${M4_TOOLCHAIN_INSTALL_DIR}|g" ${S}/makerules/env.mk
-    sed -i -e "s|^CODEGEN_PATH_M4 =.*$|CODEGEN_PATH_M4 = ${M4_TOOLCHAIN_INSTALL_DIR}|g" ${S}/makerules/env.mk
-    sed -i -e "s|^CODEGEN_PATH_A8 =.*$|CODEGEN_PATH_A8 = ${M4_TOOLCHAIN_INSTALL_DIR}|g" ${S}/makerules/env.mk
-    sed -i -e "s|^CODEGEN_PATH_A8_GCC =.*$|CODEGEN_PATH_A8_GCC = ${GCC_ARM_NONE_TOOLCHAIN}|g" ${S}/makerules/env.mk
-    sed -i -e "s|^CODEGEN_PATH_ARM9 =.*$|CODEGEN_PATH_ARM9 = ${M4_TOOLCHAIN_INSTALL_DIR}|g" ${S}/makerules/env.mk
-    sed -i -e "s|^CODEGEN_PATH_A9_GCC =.*$|CODEGEN_PATH_A9_GCC = ${GCC_ARM_NONE_TOOLCHAIN}|g" ${S}/makerules/env.mk
-    sed -i -e "s|^CODEGEN_PATH_A15 =.*$|CODEGEN_PATH_A15 = ${GCC_ARM_NONE_TOOLCHAIN}|g" ${S}/makerules/env.mk
-    sed -i -e "s|^CODEGEN_PATH_A15_GCC =.*$|CODEGEN_PATH_A15_GCC = ${GCC_ARM_NONE_TOOLCHAIN}|g" ${S}/makerules/env.mk
-    sed -i -e "s|^UTILS_INSTALL_DIR =.*$|UTILS_INSTALL_DIR = ${XDC_INSTALL_DIR}|g" ${S}/makerules/env.mk
-    sed -i -e "s|^bios_PATH =.*$|bios_PATH = ${SYSBIOS_INSTALL_DIR}|g" ${S}/makerules/env.mk
-    sed -i -e "s|^xdc_PATH =.*$|xdc_PATH = ${XDC_INSTALL_DIR}|g" ${S}/makerules/env.mk
-    sed -i -e "s|^CODEGEN_PATH_DSP =.*$|CODEGEN_PATH_DSP = ${XDCCGROOT}|g" ${S}/makerules/env.mk
-    sed -i -e "s|^CODEGEN_PATH_DSPELF =.*$|CODEGEN_PATH_DSPELF = ${XDCCGROOT}|g" ${S}/makerules/env.mk
-
-    cd ${S}/packages
-    ${XDC_INSTALL_DIR}/xdc .interfaces -PR .
-}
-
-do_compile () {
-    cd ${S}/packages
-    for p in ${PLATFORMLIST}
-    do
-        for t in ${TARGETLIST}
-        do
-            make PLATFORM=${p} TARGET=${t} FORMAT=${FORMAT}
-        done
-    done
-}
-
-do_install () {
-    CP_ARGS="-Prf --preserve=mode,timestamps --no-preserve=ownership"
-    install -d ${D}${EDMA3_LLD_INSTALL_DIR_RECIPE}
-    cp ${CP_ARGS} ${S}/* ${D}${EDMA3_LLD_INSTALL_DIR_RECIPE}
-}
-
-INSANE_SKIP_${PN}-dev = "arch ldflags file-rdeps"
-
-ALLOW_EMPTY_${PN} = "1"
-FILES_${PN}-dev += "${EDMA3_LLD_INSTALL_DIR_RECIPE}"

recipes-bsp/edma3-lld/edma3-lld.inc

@@ -1,17 +0,0 @@
-DESCRIPTION = "TI EDMA3 low level driver and test code"
-LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://COPYING.txt;md5=5bdceac872dffdec915b819654ee23ea"
-
-EDMA3_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/edma3_lld.git"
-EDMA3_LLD_GIT_PROTOCOL = "git"
-EDMA3_LLD_GIT_BRANCH = "master"
-
-# Below commit ID corresponds to version 2.12.05.30C
-EDMA3_LLD_SRCREV = "a52b8f2a4bd4ca584bbd5bebba30563add353c5a"
-
-BRANCH = "${EDMA3_LLD_GIT_BRANCH}"
-SRC_URI = "${EDMA3_LLD_GIT_URI};protocol=${EDMA3_LLD_GIT_PROTOCOL};branch=${BRANCH}"
-SRCREV = "${EDMA3_LLD_SRCREV}"
-
-PV = "2.12.05.30C"
-INC_PR = "r0"

recipes-bsp/edma3-lld/edma3-lld_git.bb

@@ -1,75 +0,0 @@
-require edma3-lld.inc
-
-PR = "${INC_PR}.0"
-
-COMPATIBLE_MACHINE = "keystone"
-
-DEPENDS = "common-csl-ip"
-
-PLATFORMLIST = "tci6636k2h-evm \
-	tci6636k2h-evm \
-	tci6638k2k-evm \
-	tci6630k2l-evm \
-	c66ak2e-evm \
-	tci66ak2g02-evm \
-	"
-
-PACKAGES =+ "${PN}-test"
-
-FILES_${PN}-test = "${bindir}/*"
-
-S = "${WORKDIR}/git"
-
-do_compile () {
-	cd ${S}/packages
-	for platform in ${PLATFORMLIST}
-	do
-		ROOTDIR=${S} CROSSCC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" CROSSAR="${TARGET_PREFIX}ar" \
-		CROSSLNK="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" INTERNAL_SW_ROOT="${S}" make \
-		PLATFORM="$platform" TARGET=a15 TOOLCHAIN_a15=GCC FORMAT=ELF \
-		SONAME=libedma3.so all
-	done
-}
-
-do_install () {
-	CP_ARGS="-Prf --preserve=mode,timestamps --no-preserve=ownership"
-
-	install -d ${D}/${libdir}
-
-	# Static Libraries
-	cp ${CP_ARGS} ${S}/packages/ti/sdo/edma3/drv/lib/a15/release/edma3_lld_drv.aa15fg \
-		${D}/${libdir}/libedma3.a
-	cp ${CP_ARGS} ${S}/packages/ti/sdo/edma3/rm/lib/tci6636k2h-evm/a15/release/edma3_lld_rm.aa15fg \
-		${D}/${libdir}/libedma3rm.a
-
-	# Shared Libraries
-	cp ${CP_ARGS} ${S}/packages/ti/sdo/edma3/drv/lib/a15/release/libedma* ${D}/${libdir}
-	cp ${CP_ARGS} ${S}/packages/ti/sdo/edma3/rm/lib/tci6636k2h-evm/a15/release/libedma* ${D}/${libdir}
-
-	# Copy Headers
-	install -d ${D}/${includedir}/ti/sdo/edma3/drv/
-	install -d ${D}/${includedir}/ti/sdo/edma3/rm
-	cp ${CP_ARGS} ${S}/packages/ti/sdo/edma3/drv/*.h ${D}/${includedir}/ti/sdo/edma3/drv/
-	cp ${CP_ARGS} ${S}/packages/ti/sdo/edma3/rm/*.h ${D}/${includedir}/ti/sdo/edma3/rm/
-
-	# Copy Sample Config
-	install -d ${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
-	cp ${CP_ARGS} ${S}/examples/edma3_user_space_driver/evmTCI6636K2H/evmTCI6636K2HSample.c \
-		${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
-	cp ${CP_ARGS} ${S}/examples/edma3_user_space_driver/evmTCI6638K2K/evmTCI6638K2KSample.c \
-		${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
-	cp ${CP_ARGS} ${S}/examples/edma3_user_space_driver/evmTCI6630K2L/evmTCI6630K2LSample.c \
-		${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
-	cp ${CP_ARGS} ${S}/examples/edma3_user_space_driver/evmC66AK2E/evmC66AK2ESample.c \
-		${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
-
-	install -d ${D}/${bindir}
-	install -c -m 755 ${S}/examples/edma3_user_space_driver/evmTCI6636K2H/bin/tci6636k2h-evm/edma3_drv_6636k2h_a15_sample_a15host_release.xa15fg \
-		${D}/${bindir}/edma3_drv_6636k2h_a15_sample_a15host_release.xa15fg
-	install -c -m 755 ${S}/examples/edma3_user_space_driver/evmTCI6638K2K/bin/tci6638k2k-evm/edma3_drv_6638k2k_a15_sample_a15host_release.xa15fg \
-		${D}/${bindir}/edma3_drv_6638k2k_a15_sample_a15host_release.xa15fg
-	install -c -m 755 ${S}/examples/edma3_user_space_driver/evmTCI6630K2L/bin/tci6630k2l-evm/edma3_drv_6630k2l_a15_sample_a15host_release.xa15fg \
-		${D}/${bindir}/edma3_drv_6630k2l_a15_sample_a15host_release.xa15fg
-	install -c -m 755 ${S}/examples/edma3_user_space_driver/evmC66AK2E/bin/c66ak2e-evm/edma3_drv_c66ak2e_a15_sample_a15host_release.xa15fg \
-		${D}/${bindir}/edma3_drv_c66ak2e_a15_sample_a15host_release.xa15fg
-}

recipes-bsp/emac-lld/emac-lld-rtos_git.bb

@@ -1,40 +0,0 @@
-SUMMARY = "TI RTOS low level driver for Ethernet MAC (EMAC) peripheral"
-
-inherit ti-pdk
-
-LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://emacver.h;beginline=1;endline=47;md5=f66bb3695972ca2a85d990a390f45d88"
-
-COMPATIBLE_MACHINE = "ti33x|ti43x|omap-a15|k2g|omapl1|c665x-evm|k3"
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-EMAC_LLD_GIT_URI = "git://git.ti.com/keystone-rtos/emac-lld.git"
-EMAC_LLD_GIT_PROTOCOL = "git"
-EMAC_LLD_GIT_BRANCH = "master"
-
-# Below commit ID corresponds to "DEV.EMAC_LLD.01.00.03.12A"
-EMAC_LLD_SRCREV = "5501d03014ada54f25e72eda380f751e734f006e"
-
-BRANCH ="${EMAC_LLD_GIT_BRANCH}"
-SRC_URI = "${EMAC_LLD_GIT_URI};protocol=${EMAC_LLD_GIT_PROTOCOL};branch=${BRANCH}"
-
-SRCREV = "${EMAC_LLD_SRCREV}"
-PV = "01.00.03.12A"
-PR = "r0"
-
-DEPENDS_append = " board-rtos osal-rtos"
-DEPENDS_append_ti33x = " starterware-rtos"
-DEPENDS_append_ti43x = " starterware-rtos"
-DEPENDS_append_k2g  = " cppi-lld-rtos qmss-lld-rtos"
-
-DEPENDS_remove_k3 = "board-rtos "
-DEPENDS_append_k3 = " udma-lld-rtos "
-
-# Build with make instead of XDC
-TI_PDK_XDCMAKE = "0"
-
-export PDK_EMAC_ROOT_PATH ="${WORKDIR}/build"
-export DEST_ROOT="${S}"
-
-# HTML doc link params
-PDK_COMP_LINK_TEXT = "EMAC LLD"

recipes-bsp/fatfs-rtos/fatfs-rtos_git.bb

@@ -1,34 +0,0 @@
-SUMMARY = "TI RTOS driver for FAT filesystem"
-
-inherit ti-pdk
-
-LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://FATFS.h;beginline=1;endline=32;md5=6619832755598d1cc2b01f2e6a1801d6"
-
-COMPATIBLE_MACHINE = "ti33x|ti43x|omap-a15|k2g|omapl1|k3"
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-FATFS_GIT_URI = "git://git.ti.com/keystone-rtos/fatfs.git"
-FATFS_GIT_PROTOCOL = "git"
-FATFS_GIT_BRANCH = "master"
-
-# Below commit ID corresponds to "DEV.FATFS_LLD.01.00.00.11"
-FATFS_SRCREV = "8b1bd374ebcb898d209305727106d4bf3f313ab2"
-
-BRANCH = "${FATFS_GIT_BRANCH}"
-SRC_URI = "${FATFS_GIT_URI};protocol=${FATFS_GIT_PROTOCOL};branch=${BRANCH}"
-
-SRCREV = "${FATFS_SRCREV}"
-PV = "01.00.00.11"
-PR = "r0"
-
-DEPENDS_append = " mmcsd-lld-rtos"
-
-# Build with make instead of XDC
-TI_PDK_XDCMAKE = "0"
-
-export PDK_FATFS_ROOT_PATH ="${WORKDIR}/build"
-export DEST_ROOT="${S}"
-
-# HTML doc link params
-PDK_COMP_LINK_TEXT = "FATFS Library"