linux-ti-staging: update with PM fixes for am43x

Signed-off-by: Denys Dmytriyenko <denys@ti.com>

conf/machine/am180x-evm.conf

@@ -5,14 +5,12 @@
 require conf/machine/include/davinci.inc
 require conf/machine/include/omapl138.inc
 
-UBOOT_MACHINE = "da850evm_config"
+UBOOT_MACHINE = "da850_am18xxevm_config"
+UBOOT_SUFFIX = "ais"
+
 UBOOT_ENTRYPOINT = "0xc0008000"
 UBOOT_LOADADDRESS = "0xc0008000"
 
-IMAGE_FSTYPES += "tar.gz ubi"
+IMAGE_FSTYPES += "tar.gz"
 
 SERIAL_CONSOLE = "115200 ttyS2"
-
-PREFERRED_PROVIDER_virtual/kernel = "linux-omapl138-psp"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am180x"
-PREFERRED_PROVIDER_u-boot = "u-boot-am180x"

conf/machine/am3517-evm.conf

@@ -15,11 +15,6 @@ EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 SERIAL_CONSOLE = "115200 ttyO2"
 USE_VT = "2"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
-
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am3517"
-PREFERRED_PROVIDER_u-boot = "u-boot-am3517"
-
 UBOOT_MACHINE = "am3517_evm_config"
 XLOAD_MACHINE = "am3517evm_config"
 

conf/machine/am37x-evm.conf

@@ -14,10 +14,6 @@ EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 
 SERIAL_CONSOLE = "115200 ttyO0"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am37x"
-PREFERRED_PROVIDER_u-boot = "u-boot-am37x"
-
 # NOTE: there are NAND and OneNAND versions of this board...
 # do ubiattach /dev/ubi_ctrl -m 4
 # From dmesg:

conf/machine/am57xx-evm.conf

@@ -0,0 +1,34 @@
+#@TYPE: Machine
+#@NAME: DRA7xx EVM
+#@DESCRIPTION: Machine configuration for the TI DRA7xx EVM
+
+require conf/machine/include/dra7xx.inc
+
+MACHINE_FEATURES += "touchscreen"
+
+IMAGE_FSTYPES += "ubi tar.gz"
+
+SERIAL_CONSOLE = "115200 ttyO2"
+
+UBOOT_MACHINE = "beagle_x15_config"
+
+# UBI information.  Note that this is board and kernel specific.  Changes
+# in your kernel port may require changes in these variables.  For more
+# details about this board please see
+# http://processors.wiki.ti.com/index.php/UBIFS_Support
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1988 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 4352"
+
+# do ubiattach /dev/ubi_ctrl -m 7 -O 2048
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              512
+# UBI: VID header offset:          2048 (aligned 2048)
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"

conf/machine/beagleboard.conf

@@ -7,10 +7,6 @@ require conf/machine/include/omap3.inc
 # Only has DVI connector for external screen
 GUI_MACHINE_CLASS = "bigscreen"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-mainline"
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-beagleboard"
-PREFERRED_PROVIDER_u-boot = "u-boot-beagleboard"
-
 IMAGE_FSTYPES += "tar.gz ubi"
 EXTRA_IMAGECMD_jffs2 = "-lnp"
 

conf/machine/beaglebone.conf

@@ -11,4 +11,4 @@ IMAGE_FSTYPES += "tar.gz"
 
 SERIAL_CONSOLE = "115200 ttyO0"
 
-UBOOT_MACHINE = "am335x_evm_config"
+UBOOT_MACHINE = "am335x_boneblack_config"

conf/machine/dra7xx-evm.conf

@@ -2,7 +2,9 @@
 #@NAME: DRA7xx EVM
 #@DESCRIPTION: Machine configuration for the TI DRA7xx EVM
 
-require conf/machine/include/omap-a15.inc
+require conf/machine/include/dra7xx.inc
+
+MACHINE_FEATURES += "touchscreen"
 
 IMAGE_FSTYPES += "ubi tar.gz"
 
@@ -21,7 +23,7 @@ UBOOT_MACHINE = "dra7xx_evm_config"
 # UBI: logical eraseblock size:    126976 bytes
 # from ubiattach stdout:
 # UBI device number 0, total 1988 LEBs
-MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3836"
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 4352"
 
 # do ubiattach /dev/ubi_ctrl -m 7 -O 2048
 # from dmesg:
@@ -30,7 +32,3 @@ MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3836"
 # UBI: sub-page size:              512
 # UBI: VID header offset:          2048 (aligned 2048)
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
-
-# Currently removing the sgx machine feature because there is no SGX package
-# available for omap5
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"

conf/machine/include/davinci.inc

@@ -5,7 +5,7 @@ MACHINE_KERNEL_PR = "r53"
 
 KERNEL_IMAGETYPE = "uImage"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-davinci"
+PREFERRED_PROVIDER_virtual/kernel = "linux-mainline"
 PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
 
 UBOOT_MACHINE = "davinci_dvevm_config"

conf/machine/include/dra7xx.inc

@@ -0,0 +1,4 @@
+require conf/machine/include/omap-a15.inc
+SOC_FAMILY_append = ":dra7xx"
+
+MACHINE_FEATURES += "pci mmip"

conf/machine/include/keystone.inc

@@ -1,6 +1,7 @@
 SOC_FAMILY = "keystone"
 require conf/machine/include/soc-family.inc
 
+DEFAULTTUNE ?= "cortexa15thf-neon"
 require conf/machine/include/tune-cortexa15.inc
 
 PREFERRED_PROVIDER_virtual/kernel = "linux-keystone"
@@ -8,12 +9,10 @@ PREFERRED_PROVIDER_virtual/bootloader = "u-boot-keystone"
 PREFERRED_PROVIDER_u-boot = "u-boot-keystone"
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r7"
+MACHINE_KERNEL_PR = "r8"
 
 KERNEL_IMAGETYPE = "uImage"
 
-UBOOT_MACHINE = "tci6638_evm_config"
-
 UBOOT_ENTRYPOINT = "0x80008000"
 UBOOT_LOADADDRESS = "0x80008000"
 

conf/machine/include/omap-a15.inc

@@ -1,10 +1,11 @@
 SOC_FAMILY = "omap-a15"
 require conf/machine/include/soc-family.inc
 
+DEFAULTTUNE ?= "cortexa15thf-neon"
 require conf/machine/include/tune-cortexa15.inc
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r3"
+MACHINE_KERNEL_PR = "r6"
 
 PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"
 PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti-staging"
@@ -28,3 +29,6 @@ GUI_MACHINE_CLASS = "smallscreen"
 # Use the expected value of the ubifs filesystem's volume name in the kernel
 # and u-boot.
 UBI_VOLNAME = "rootfs"
+
+# List common SoC features, may need to add touchscreen for specific machines
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet sgx"

conf/machine/include/omap3.inc

@@ -1,6 +1,7 @@
 SOC_FAMILY = "omap3"
 require conf/machine/include/soc-family.inc
 
+DEFAULTTUNE ?= "cortexa8thf-neon"
 require conf/machine/include/tune-cortexa8.inc
 
 PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
@@ -16,12 +17,12 @@ XSERVER = "xserver-xorg \
 GUI_MACHINE_CLASS = "bigscreen"
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r125"
+MACHINE_KERNEL_PR = "r126"
 
 KERNEL_IMAGETYPE = "uImage"
 
 # Default providers, may need to override for specific machines
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap"
+PREFERRED_PROVIDER_virtual/kernel = "linux-mainline"
 PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
 
 UBOOT_ARCH = "arm"

conf/machine/include/omap4.inc

@@ -1,6 +1,7 @@
 SOC_FAMILY = "omap4"
 require conf/machine/include/soc-family.inc
 
+DEFAULTTUNE ?= "cortexa9thf-neon"
 require conf/machine/include/tune-cortexa9.inc
 
 PREFERRED_PROVIDER_virtual/kernel = "linux-omap4"
@@ -13,7 +14,7 @@ XSERVER = "xserver-xorg \
            xf86-video-omap"
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r1"
+MACHINE_KERNEL_PR = "r2"
 
 KERNEL_IMAGETYPE = "uImage"
 

conf/machine/include/ti33x.inc

@@ -1,6 +1,7 @@
 SOC_FAMILY = "ti33x"
 require conf/machine/include/soc-family.inc
 
+DEFAULTTUNE ?= "cortexa8thf-neon"
 require conf/machine/include/tune-cortexa8.inc
 
 PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
@@ -16,7 +17,7 @@ XSERVER = "xserver-xorg \
 GUI_MACHINE_CLASS = "bigscreen"
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r21"
+MACHINE_KERNEL_PR = "r22"
 
 # Default providers, may need to override for specific machines
 PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"

conf/machine/include/ti43x.inc

@@ -1,6 +1,7 @@
 SOC_FAMILY = "ti43x"
 require conf/machine/include/soc-family.inc
 
+DEFAULTTUNE ?= "cortexa9thf-neon"
 require conf/machine/include/tune-cortexa9.inc
 
 PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
@@ -16,7 +17,7 @@ XSERVER = "xserver-xorg \
 GUI_MACHINE_CLASS = "bigscreen"
 
 # Increase this everytime you change something in the kernel
-MACHINE_KERNEL_PR = "r2"
+MACHINE_KERNEL_PR = "r3"
 
 # Default providers, may need to override for specific machines
 PREFERRED_PROVIDER_virtual/kernel = "linux-ti-staging"

conf/machine/k2e-evm.conf

@@ -1,9 +1,13 @@
 #@TYPE: Machine
-#@NAME: Keystone 2 machine
-#@DESCRIPTION: Machine configuration for the TI Keystone 2
+#@NAME: Keystone 2 K2E machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2E EVM
 
 require conf/machine/include/keystone.inc
 
+UBOOT_MACHINE = "k2e_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2e"
+
 IMAGE_FSTYPES += "ubi tar.gz cpio"
 
 SERIAL_CONSOLE = "115200 ttyS0"

conf/machine/k2hk-evm.conf

@@ -0,0 +1,30 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2HK machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2HK EVM
+
+require conf/machine/include/keystone.inc
+
+UBOOT_MACHINE = "k2hk_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2hk"
+
+IMAGE_FSTYPES += "ubi tar.gz cpio"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: logical eraseblock size:    126976 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 3856 LEBs
+MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3856"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    2048
+# UBI: physical eraseblock size:   131072 bytes (128 KiB)
+# UBI: sub-page size:              2048
+UBINIZE_ARGS = "-m 2048 -p 128KiB -s 2048 -O 2048"

conf/machine/k2l-evm.conf

@@ -0,0 +1,30 @@
+#@TYPE: Machine
+#@NAME: Keystone 2 K2L machine
+#@DESCRIPTION: Machine configuration for the TI Keystone 2 K2L EVM
+
+require conf/machine/include/keystone.inc
+
+UBOOT_MACHINE = "k2l_evm_config"
+
+BOOT_MONITOR_MAKE_TARGET = "k2l"
+
+IMAGE_FSTYPES += "ubi tar.gz cpio"
+
+SERIAL_CONSOLE = "115200 ttyS0"
+
+SYSVINIT_ENABLED_GETTYS = ""
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# From dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: logical eraseblock size:    253952 bytes
+# from ubiattach stdout:
+# UBI device number 0, total 1926 LEBs
+MKUBIFS_ARGS = "-F -m 4096 -e 253952 -c 1926"
+
+# do ubiattach /dev/ubi_ctrl -m 4
+# from dmesg:
+# UBI: smallest flash I/O unit:    4096
+# UBI: physical eraseblock size:   256 KiB
+# UBI: sub-page size:              4096
+UBINIZE_ARGS = "-m 4096 -p 256KiB -s 4096 -O 4096"

conf/machine/omap3evm.conf

@@ -15,8 +15,6 @@ EXTRA_IMAGECMD_jffs2 = "-lnp -e 0x20000 -s 2048"
 SERIAL_CONSOLE = "115200 ttyS0"
 USE_VT = "0"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux-omap-psp"
-
 EXTRA_IMAGEDEPENDS += "x-load"
 
 # NOTE: there are NAND and OneNAND versions of this board...

conf/machine/omap5-evm.conf

@@ -30,7 +30,3 @@ MKUBIFS_ARGS = "-F -m 2048 -e 126976 -c 3836"
 UBINIZE_ARGS = "-m 2048 -p 128KiB -s 512 -O 2048"
 
 UBOOT_MACHINE = "omap5_uevm_config"
-
-# Currently removing the sgx machine feature because there is no SGX package
-# available for omap5
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen touchscreen"

recipes-bsp/am33x-cm3/am33x-cm3_git.bb

@@ -0,0 +1,29 @@
+DESCRIPTION = "Cortex-M3 binary blob for suspend-resume"
+
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://License.txt;md5=7bdc54a749ab7a7dea999d25d99a41b8"
+
+PV = "1.9.0"
+PR = "r0"
+PE = "1"
+
+SRCREV = "d85e6a17da1025adac9ab7f97dd7aa2a58c517ce"
+BRANCH ?= "ti-v3.14.y"
+
+SRC_URI = "git://git.ti.com/ti-cm3-pm-firmware/amx3-cm3.git;protocol=git;branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
+
+FLOATABI = "${@base_contains("TUNE_FEATURES", "vfp", base_contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
+
+do_compile() {
+	make CROSS_COMPILE="${TARGET_PREFIX}" CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}"
+}
+
+do_install() {
+	install -d ${D}${base_libdir}/firmware
+	install -m 0644 bin/am335x-pm-firmware.elf ${D}${base_libdir}/firmware/
+	install -m 0644 bin/*-scale-data.bin ${D}${base_libdir}/firmware/
+}
+
+FILES_${PN} += "${base_libdir}/firmware"

recipes-bsp/boot-monitor/boot-monitor_git.bb

@@ -1,27 +1,27 @@
 DESCRIPTION = "Boot Monitor - TI ARM Boot monitor code"
-EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}"
-
 LICENSE = "BSD"
-
-BOOT_MONITOR_BINARY ?= "skern.bin"
-BOOT_MONITOR_IMAGE  ?= "skern-${MACHINE}.bin"
-BOOT_MONITOR_MAKE_TARGET  ?= "all"
-
 LIC_FILES_CHKSUM = "file://COPYING;md5=25fe219a6febf6e5bb45beda1b2eb315"
 
-COMPATIBLE_MACHINE = "keystone-evm"
+COMPATIBLE_MACHINE = "keystone"
 
 SRC_URI = "git://git.ti.com/keystone-linux/boot-monitor.git;protocol=git;branch=${BRANCH}"
 
 PV = "2.0"
-PR = "r0+gitr${SRCPV}"
+PR = "r1+gitr${SRCPV}"
 
 BRANCH = "master"
 
 S = "${WORKDIR}/git"
 
-#Tag "K2_BM_13.11"
-SRCREV = "ba597d183423971e63295cdd59d3c90245e9170a"
+#Tag "K2_BM_14.09"
+SRCREV = "4b0287a3fa9c7a25c75bbe3a54f4ac2a92dc0aaa"
+
+BOOT_MONITOR_BINARY ?= "skern.bin"
+BOOT_MONITOR_IMAGE  ?= "skern-${MACHINE}.bin"
+
+FLOATABI = "${@base_contains("TUNE_FEATURES", "vfp", base_contains("TUNE_FEATURES", "callconvention-hard", " -mfloat-abi=hard", " -mfloat-abi=softfp", d), "" ,d)}"
+
+EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS} ${FLOATABI}""
 
 do_compile () {
 	unset LDFLAGS

recipes-bsp/common-csl-ip/common-csl-ip_git.bb

@@ -0,0 +1,20 @@
+DESCRIPTION = "Chip support library low level interface"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=5857833e20836213677fac33f9aded21"
+
+COMPATIBLE_MACHINE = "keystone"
+ALLOW_EMPTY_${PN} = "1"
+
+PR = "r1"
+BRANCH="master"
+SRC_URI = "git://git.ti.com/keystone-rtos/common-csl-ip.git;protocol=git;branch=${BRANCH}"
+# commit ID corresponds to DEV.CSL_KEYSTONE2.02.01.00.05A
+SRCREV = "80d18dda4a76ce1a22cf2b5156f111390d75bea4"
+
+S = "${WORKDIR}/git"
+
+do_install () {
+    install -d ${D}${includedir}/ti/csl
+    find . -name "*.h" -type f | xargs -I {} cp --parents {} ${D}${includedir}/ti/csl
+    find ./src/ip/serdes_sb/V0 -name "*.c" -type f | xargs -I {} cp --parents {} ${D}${includedir}/ti/csl
+}

recipes-bsp/cppi-lld/cppi-lld-test_git.bb

@@ -0,0 +1,26 @@
+DESCRIPTION = "TI CPPI low level driver unit test and example binaries"
+COMPATIBLE_MACHINE = "keystone"
+DEPENDS = "common-csl-ip rm-lld cppi-lld qmss-lld"
+
+include cppi-lld.inc
+
+CHOICELIST = "yes no"
+
+do_compile () {
+#   Now build the lld in the updated directory
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S}
+		for choice in ${CHOICELIST}
+		do
+			make -f makefile_armv7 tests examples PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S} USEDYNAMIC_LIB="$choice"
+		done
+	done
+}
+
+do_install () {
+	for device in ${DEVICELIST}
+do
+	make -f makefile_armv7 installbin PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" CPPI_SRC_DIR=${S} INSTALL_BIN_BASE_DIR=${D}${bindir}
+	done
+}

recipes-bsp/cppi-lld/cppi-lld.inc

@@ -0,0 +1,15 @@
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/drv/cppi/COPYING.txt;md5=e8f6789acdcda76d02ed9203fc2e603d"
+
+BRANCH = "master"
+SRC_URI = "git://git.ti.com/keystone-rtos/cppi-lld.git;destsuffix=git/ti/drv/cppi;protocol=git;branch=${BRANCH}"
+
+# Below Commit ID corresponds to "DEV.CPPI_LLD.02.01.00.06"
+SRCREV = "4c6c0a857786c49d8003453d3bc7c3c97ff4f5a4"
+PV = "02.01.00.06"
+PR = "r0"
+
+DEVICELIST = "k2h k2k k2l k2e"
+
+BASEDIR = "${WORKDIR}/git"
+S = "${BASEDIR}/ti/drv/cppi"

recipes-bsp/cppi-lld/cppi-lld_git.bb

@@ -0,0 +1,19 @@
+DESCRIPTION = "TI CPPI Module low level driver"
+COMPATIBLE_MACHINE = "keystone"
+
+DEPENDS = "common-csl-ip rm-lld qmss-lld"
+
+include cppi-lld.inc
+
+do_compile () {
+#   Now build the lld in the updated directory
+	make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR}
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 lib PDK_INSTALL_PATH=${STAGING_INCDIR}  DEVICE="${device}" 
+	done
+}
+
+do_install () {
+	make -f makefile_armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
+}

recipes-bsp/dspdce-fw/dspdce-fw_1.00.00.04.bb

@@ -0,0 +1,26 @@
+DESCRIPTION = "Firmware for DSP for an example application called copycodectest"
+LICENSE = "TI-TSPA"
+LIC_FILES_CHKSUM = "file://DSPDCE-${PV}-Manifest.doc;md5=b8feda5a3ed8197d05993c0d0ff5590e"
+
+COMPATIBLE_MACHINE = "dra7xx-evm"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+SRC_URI = "http://downloads.ti.com/dsps/dsps_public_sw/glsdk/dspdce/1_00_00_04/exports/dspdce-${MACHINE}-1.00.00.04.tar.gz;protocol=ftp"
+
+S = "${WORKDIR}/dspdce-${MACHINE}-${PV}"
+
+SRC_URI[md5sum] = "72722b12e90c26a85f7f1b56d749cad0"
+SRC_URI[sha256sum] = "64057db41dbee5a992db88129a9154f27c67cfbba8efdc0f09b7de38df4d58eb"
+
+TARGET = "dra7-dsp1-fw.xe66"
+
+do_install() {
+        mkdir -p ${D}${base_libdir}/firmware
+        cp ${S}/firmware/${TARGET} ${D}${base_libdir}/firmware/${TARGET}
+}
+
+FILES_${PN} += "${base_libdir}/firmware/${TARGET}"
+
+INSANE_SKIP_${PN} = "arch"
+
+PR = "r1"

recipes-bsp/edma3-lld/edma3-lld_git.bb

@@ -0,0 +1,80 @@
+DESCRIPTION = "TI EDMA3 low level driver and test code"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=5bdceac872dffdec915b819654ee23ea"
+
+BRANCH = "master"
+SRC_URI = "git://git.ti.com/keystone-rtos/edma3_lld.git"
+# The following commit corresponds to tag DEV_EDMA3_LLD_02_11_13_17
+SRCREV = "8c27e548fa53ca8472404ef347b8f6b6e2588d46"
+
+PV = "2.11.13"
+PR = "r0"
+
+COMPATIBLE_MACHINE = "keystone"
+
+DEPENDS = "common-csl-ip"
+
+PLATFORMLIST = "tci6636k2h-evm \
+	tci6638k2k-evm \
+	tci6630k2l-evm \
+	c66ak2e-evm \
+	"
+
+PACKAGES =+ "${PN}-test"
+
+FILES_${PN}-test = "${bindir}/*"
+
+S = "${WORKDIR}/git"
+
+do_compile () {
+	cd ${S}/packages
+	for platform in ${PLATFORMLIST}
+	do
+		ROOTDIR=${S} CROSSCC="${TARGET_PREFIX}gcc" CROSSAR="${TARGET_PREFIX}ar" \
+		CROSSLNK="${TARGET_PREFIX}gcc" INTERNAL_SW_ROOT="${S}" make \
+		PLATFORM="$platform" TARGET=a15 TOOLCHAIN_a15=GCC FORMAT=ELF \
+		SONAME=libedma3.so all
+	done
+}
+
+do_install () {
+	install -d ${D}/${libdir}
+
+	# Static Libraries
+	cp ${S}/packages/ti/sdo/edma3/drv/lib/a15/release/edma3_lld_drv.aa15fg \
+		${D}/${libdir}/libedma3.a
+	cp ${S}/packages/ti/sdo/edma3/rm/lib/tci6636k2h-evm/a15/release/edma3_lld_rm.aa15fg \
+		${D}/${libdir}/libedma3rm.a
+
+	# Shared Libraries
+	cp -a ${S}/packages/ti/sdo/edma3/drv/lib/a15/release/libedma* ${D}/${libdir}
+	cp -a ${S}/packages/ti/sdo/edma3/rm/lib/tci6636k2h-evm/a15/release/libedma* ${D}/${libdir}
+
+	# Copy Headers
+	install -d ${D}/${includedir}/ti/sdo/edma3/drv/
+	install -d ${D}/${includedir}/ti/sdo/edma3/rm
+	cp ${S}/packages/ti/sdo/edma3/drv/*.h ${D}/${includedir}/ti/sdo/edma3/drv/
+	cp ${S}/packages/ti/sdo/edma3/rm/*.h ${D}/${includedir}/ti/sdo/edma3/rm/
+
+	# Copy Sample Config
+	install -d ${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
+	cp ${S}/examples/edma3_user_space_driver/evmTCI6636K2H/evmTCI6636K2HSample.c \
+		${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
+	cp ${S}/examples/edma3_user_space_driver/evmTCI6638K2K/evmTCI6638K2KSample.c \
+		${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
+	cp ${S}/examples/edma3_user_space_driver/evmTCI6630K2L/evmTCI6630K2LSample.c \
+		${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
+	cp ${S}/examples/edma3_user_space_driver/evmC66AK2E/evmC66AK2ESample.c \
+		${D}/${includedir}/ti/sdo/edma3/drv/sample/src/platforms
+
+	install -d ${D}/${bindir}
+	install -c -m 755 ${S}/examples/edma3_user_space_driver/evmTCI6636K2H/bin/tci6636k2h-evm/edma3_drv_6636k2h_a15_sample_a15host_release.xa15fg \
+		${D}/${bindir}/edma3_drv_6636k2h_a15_sample_a15host_release.xa15fg
+	install -c -m 755 ${S}/examples/edma3_user_space_driver/evmTCI6638K2K/bin/tci6638k2k-evm/edma3_drv_6638k2k_a15_sample_a15host_release.xa15fg \
+		${D}/${bindir}/edma3_drv_6638k2k_a15_sample_a15host_release.xa15fg
+	install -c -m 755 ${S}/examples/edma3_user_space_driver/evmTCI6630K2L/bin/tci6630k2l-evm/edma3_drv_6630k2l_a15_sample_a15host_release.xa15fg \
+		${D}/${bindir}/edma3_drv_6630k2l_a15_sample_a15host_release.xa15fg
+	install -c -m 755 ${S}/examples/edma3_user_space_driver/evmC66AK2E/bin/c66ak2e-evm/edma3_drv_c66ak2e_a15_sample_a15host_release.xa15fg \
+		${D}/${bindir}/edma3_drv_c66ak2e_a15_sample_a15host_release.xa15fg
+}
+

recipes-bsp/formfactor/formfactor_0.0.bbappend

@@ -1,2 +1 @@
-PRINC := "${@int(PRINC) + 1}"
 FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"

recipes-bsp/hyplnk-lld/hyplnk-lld-test_git.bb

@@ -0,0 +1,32 @@
+include hyplnk-lld.inc
+
+DEPENDS = "common-csl-ip hyplnk-lld"
+
+CHOICELIST = " yes \
+               no  \
+"
+
+do_compile () {
+	make -f makefile_armv7 clean PDK_INSTALL_PATH="${STAGING_INCDIR}" \
+		HYPLNK_SRC_DIR="${S}"
+	for device in ${DEVICELIST}
+	do
+		for choice in ${CHOICELIST}
+		do
+			make -f makefile_armv7 tests examples \
+				PDK_INSTALL_PATH="${STAGING_INCDIR}" \
+				DEVICE="$device" HYPLNK_SRC_DIR="${S}" \
+				USEDYNAMIC_LIB="$choice"
+		done
+	done
+}
+
+do_install () {
+    for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 installbin \
+			PDK_INSTALL_PATH="${STAGING_INCDIR}" DEVICE="$device" \
+			HYPLNK_SRC_DIR="${S}" \
+			INSTALL_BIN_BASE_DIR="${D}/${bindir}"
+	done
+}

recipes-bsp/hyplnk-lld/hyplnk-lld.inc

@@ -0,0 +1,24 @@
+DESCRIPTION = "TI Hyperlink Low Level Driver"
+LICENSE = "BSD-3-Clause"
+
+COMPATIBLE_MACHINE = "keystone"
+
+LLDNAME="hyplnk"
+
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/drv/${LLDNAME}/COPYING.txt;md5=623325cc19e613a4e770fbb749922592"
+
+BRANCH="master"
+SRC_URI = "git://git.ti.com/keystone-rtos/hyplnk-lld.git;destsuffix=git/ti/drv/${LLDNAME};protocol=git;branch=${BRANCH}"
+# Following commit corresponds to tag DEV.HYPLNK_LLD.02.01.00.01
+SRCREV = "6910da379501984ecf27f8d23ba6fc6310fe387e"
+
+PV = "2.1.0"
+PR = "r0"
+
+DEVICELIST = " k2h \
+               k2k \
+               k2e \
+"
+
+BASEDIR = "${WORKDIR}/git"
+S = "${BASEDIR}/ti/drv/${LLDNAME}"

recipes-bsp/hyplnk-lld/hyplnk-lld_git.bb

@@ -0,0 +1,22 @@
+include hyplnk-lld.inc
+
+DEPENDS = "common-csl-ip"
+
+CHOICELIST = " yes \
+               no  \
+"
+do_compile () {
+	make -f makefile_armv7 clean PDK_INSTALL_PATH="${STAGING_INCDIR}" \
+		HYPLNK_SRC_DIR="${S}"
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 lib PDK_INSTALL_PATH="${STAGING_INCDIR}"\
+			DEVICE="$device" HYPLNK_SRC_DIR="${S}"
+	done
+}
+
+do_install () {
+	make -f makefile_armv7 install PDK_INSTALL_PATH="${STAGING_INCDIR}" \
+		INSTALL_INC_BASE_DIR="${D}/${includedir}" \
+		INSTALL_LIB_BASE_DIR="${D}${libdir}" HYPLNK_SRC_DIR="${S}"
+}

recipes-bsp/ipumm-fw/ipumm-fw_3.00.06.00.bb

@@ -0,0 +1,43 @@
+python __anonymous() {
+    features = bb.data.getVar("MACHINE_FEATURES", d, 1)
+    if not features:
+        return
+    if "mmip" not in features:
+        raise bb.parse.SkipPackage('ipumm-fw does not apply to systems without the "mmip" flag in MACHINE_FEATURES')
+}
+
+DESCRIPTION = "Firmware for IPU for supporting Accelerated MM decode and encode"
+LICENSE = "TI-TSPA"
+
+LIC_FILES_CHKSUM_dra7xx = "file://MMIP-${PV}-Manifest.doc;md5=8206ccaf28c2932afb5afd9c9575287c"
+LIC_FILES_CHKSUM_omap5-evm = "file://MMIP-${PV}-Manifest.doc;md5=39a593dd8fc2a9654c74f679ed329c45"
+
+COMPATIBLE_MACHINE = "dra7xx|omap5-evm"
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+SRC_URI_dra7xx = "http://downloads.ti.com/dsps/dsps_public_sw/glsdk/ipumm/3_00_06_00/exports/ipumm-dra7xx-evm-3.00.06.00.tar.gz;protocol=ftp;name=dra7xx-evm"
+
+SRC_URI_omap5-evm  = "http://downloads.ti.com/dsps/dsps_public_sw/glsdk/ipumm/3_00_04_02/exports/ipumm-${MACHINE}-3.00.04.02.tar.gz;protocol=http;name=${MACHINE}"
+
+# DRA7xx checksums
+SRC_URI[dra7xx-evm.md5sum] = "8e1ae40eb10d631318d001463fa11d79"
+SRC_URI[dra7xx-evm.sha256sum] = "30c275146c34d11dbc2dfd568f0bbc3098a13cd981eee8a7a9766cb07d2f1ca5"
+
+# OMAP5 checksums
+SRC_URI[omap5-evm.md5sum] = "1572073ebd4f6d127c4e8cf47d270b6a"
+SRC_URI[omap5-evm.sha256sum] = "2fdb469f19e3c9984854f5bc82444fca4d7da869f5e645da22ec0d5beaa5cc65"
+
+S_dra7xx = "${WORKDIR}/ipumm-dra7xx-evm-${PV}"
+S_omap5-evm = "${WORKDIR}/ipumm-${MACHINE}-${PV}"
+
+TARGET_dra7xx = "dra7-ipu2-fw.xem4"
+TARGET_omap5-evm = "ducati-m3-core0.xem3"
+
+do_install() {
+        mkdir -p ${D}${base_libdir}/firmware
+        cp ${S}/firmware/${TARGET} ${D}${base_libdir}/firmware/${TARGET}
+}
+
+FILES_${PN} += "${base_libdir}/firmware/${TARGET}"
+
+PR = "r1"

recipes-bsp/mmap-lld/mmap-lld-test_git.bb

@@ -0,0 +1,40 @@
+DESCRIPTION = "TI KEYSTONE MMAP driver test binaries "
+include mmap-lld.inc
+
+DEPENDS="common-csl-ip mmap-lld"
+RDEPENDS_${PN}="uio-module-drv"
+
+DEVICELIST = "k2h \
+              k2k \
+              k2e \
+"
+
+CHOICELIST = " yes \
+               no \
+"
+
+do_compile () {
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 clean \
+			PDK_INSTALL_PATH="${STAGING_INCDIR}" \
+			DEVICE="$device" MPAX_SRC_DIR="${S}"
+		for choice in ${CHOICELIST}
+		do
+			make -f makefile_armv7 tests examples \
+				PDK_INSTALL_PATH=${STAGING_INCDIR} \
+				DEVICE="$device" MPAX_SRC_DIR="${S}" \
+				USEDYNAMIC_LIB="$choice"
+		done
+	done
+}
+
+do_install () {
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 installbin \
+		PDK_INSTALL_PATH=${STAGING_INCDIR} \
+		DEVICE="$device" MPAX_SRC_DIR="${S}" \
+		INSTALL_BIN_BASE_DIR="${D}/${bindir}"
+	done
+}

recipes-bsp/mmap-lld/mmap-lld.inc

@@ -0,0 +1,16 @@
+LICENSE = "BSD-3-Clause"
+
+COMPATIBLE_MACHINE = "keystone"
+
+LIC_FILES_CHKSUM = "file://COPYING.txt;md5=b3315b8190036fe1c6a8263d02e15606"
+
+
+BRANCH="master"
+SRC_URI = "git://git.ti.com/keystone-rtos/mmap-lld.git;destsuffix=git/ti/runtime/mmap;protocol=git;branch=${BRANCH}"
+# Commit correspond to DEV.MMAP.02.00.00.03
+SRCREV = "601f9284c392f67bb7f69ed1a5df5231a43c3137"
+
+PV="2.0.0"
+PR = "r0"
+
+S = "${WORKDIR}/git/ti/runtime/mmap"

recipes-bsp/mmap-lld/mmap-lld_git.bb

@@ -0,0 +1,12 @@
+DESCRIPTION = "TI KEYSTONE mmap driver using Keystone MPAX Programming"
+include mmap-lld.inc
+
+DEPENDS="common-csl-ip"
+
+do_compile () {
+	make -f makefile_armv7 clean lib PDK_INSTALL_PATH=${STAGING_INCDIR}
+}
+
+do_install () {
+	make -f makefile_armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
+}

recipes-bsp/pa-lld/pa-lld-test_git.bb

@@ -0,0 +1,28 @@
+DESCRIPTION = "TI PA LLD unit test and example binaries"
+
+DEPENDS = "common-csl-ip pa-lld cppi-lld qmss-lld sa-lld"
+
+include pa-lld.inc
+
+DEVICELIST = "k2h k2k k2l k2e"
+
+CHOICELIST = "yes no"
+
+do_compile () {
+# Now build the lld unit test examples
+	for device in ${DEVICELIST}
+	do
+	make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" PA_SRC_DIR=${S}
+		for choice in ${CHOICELIST}
+		do
+			make -f makefile_armv7 tests examples PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" PA_SRC_DIR=${S} USEDYNAMIC_LIB="$choice"
+		done
+	done
+}
+
+do_install () {
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 installbin PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" PA_SRC_DIR=${S} INSTALL_BIN_BASE_DIR=${D}${bindir}
+	done
+}

recipes-bsp/pa-lld/pa-lld.inc

@@ -0,0 +1,15 @@
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/drv/pa/COPYING.txt;md5=e8f6789acdcda76d02ed9203fc2e603d"
+
+COMPATIBLE_MACHINE = "keystone"
+
+BRANCH = "master"
+SRC_URI = "git://git.ti.com/keystone-rtos/pa-lld.git;destsuffix=git/ti/drv/pa;protocol=git;branch=${BRANCH}"
+
+# Below Commit ID corresponds to "DEV.PA_LLD.03.00.01.01"
+SRCREV = "55207930b4491f33776f2c4c2c0707a73c69314c"
+PV = "03.00.01.01"
+PR = "r0"
+
+BASEDIR = "${WORKDIR}/git"
+S = "${BASEDIR}/ti/drv/pa"

recipes-bsp/pa-lld/pa-lld_git.bb

@@ -0,0 +1,15 @@
+DESCRIPTION = "TI PA LLD library"
+
+DEPENDS = "common-csl-ip rm-lld"
+
+include pa-lld.inc
+
+do_compile () {
+#   Now build the lld in the updated directory
+	make -f makefile_armv7 DEVICE=k2h clean lib PDK_INSTALL_PATH=${STAGING_INCDIR}
+	make -f makefile_armv7 DEVICE=k2l lib PDK_INSTALL_PATH=${STAGING_INCDIR}
+}
+
+do_install () {
+	make -f makefile_armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
+}

recipes-bsp/pktlib/pktlib_git.bb

@@ -0,0 +1,25 @@
+DESCRIPTION = "Provides library for handling packet descriptors for keystone devices"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/COPYING.txt;md5=b7982a377c680ad71ca2fbb735982462"
+
+DEPENDS = "common-csl-ip rm-lld qmss-lld cppi-lld"
+COMPATIBLE_MACHINE = "keystone"
+
+BRANCH = "master"
+SRC_URI = "git://git.ti.com/keystone-rtos/pktlib.git;protocol=git;branch=${BRANCH}"
+
+# Corresponds to DEV.PKTLIB.2.1.0.4
+SRCREV = "a9aa56afed54b0a04f36d2fdb248cad5dcac6ff6"
+PV = "2.1.0.4"
+
+S = "${WORKDIR}/git/ti/runtime/pktlib"
+
+EXTRA_OEMAKE += "-f makefile_armv7 PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}"
+
+do_compile () {
+	oe_runmake lib
+}
+
+do_install () {
+	oe_runmake install
+}

recipes-bsp/powervr-drivers/omap3-sgx-modules-5.01.01.01/0001-PoC-GFX-SDK-Make-5_01_01_01-work-against-3.14-LTS.patch

@@ -0,0 +1,52 @@
+From e2db38959a70d1be604a297276a0b0c2ac219bf5 Mon Sep 17 00:00:00 2001
+From: Darren Etheridge <detheridge@ti.com>
+Date: Tue, 29 Jul 2014 16:06:17 -0500
+Subject: [PATCH 1/4] PoC: GFX: SDK: Make 5_01_01_01 work against 3.14 LTS
+
+An API rename is the main change.  Also hacked in some function prototypes
+for enabling use of the tilcdc DRM driver instead of the fbdev driver on
+AM335x.  However this all really needs a good cleanup as it is hacky at
+the moment.
+
+Signed-off-by: Darren Etheridge <detheridge@ti.com>
+---
+ GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c | 5 +++++
+ GFX_Linux_KM/services4/srvkm/env/linux/mutils.h                 | 6 +++++-
+ 2 files changed, 10 insertions(+), 1 deletion(-)
+
+diff --git a/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c b/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c
+index 5c3fc48..3857b95 100644
+--- a/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c
++++ b/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c
+@@ -93,6 +93,11 @@ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ #include <linux/mutex.h>
+ 
+ #include <video/da8xx-fb.h>
++/* used by SGX OMAPLFB drvier */
++typedef void (*vsync_callback_t)(void *arg);
++int register_vsync_cb(vsync_callback_t handler, void *arg, int idx);
++int unregister_vsync_cb(vsync_callback_t handler, void *arg, int idx);
++
+ #if defined(PVR_OMAPLFB_DRM_FB)
+ #if (LINUX_VERSION_CODE < KERNEL_VERSION(3,0,0))
+ #include <plat/display.h>
+diff --git a/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h b/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h
+index 31e0dac..90ec41c 100644
+--- a/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h
++++ b/GFX_Linux_KM/services4/srvkm/env/linux/mutils.h
+@@ -79,7 +79,11 @@ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ 	#define	IOREMAP(pa, bytes)	ioremap_cache(pa, bytes)
+ #else	
+ 	#if defined(__arm__) && (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0))
+-		#define	IOREMAP(pa, bytes)	ioremap_cached(pa, bytes)
++		#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,13,0))
++			#define	IOREMAP(pa, bytes)	ioremap_cache(pa, bytes)
++		#else
++			#define	IOREMAP(pa, bytes)	ioremap_cached(pa, bytes)
++		#endif
+ 	#else
+ 		#define IOREMAP(pa, bytes)	ioremap(pa, bytes)
+ 	#endif
+-- 
+1.9.1
+

recipes-bsp/powervr-drivers/omap3-sgx-modules-5.01.01.01/0002-SGX-linux-use-platform-data-to-provide-reset-info.patch

@@ -0,0 +1,121 @@
+From 7886ef77e4b48a7edd14acbcbe48f6a898251e78 Mon Sep 17 00:00:00 2001
+From: Darren Etheridge <detheridge@ti.com>
+Date: Fri, 25 Jul 2014 16:03:14 -0500
+Subject: [PATCH 2/5] SGX: linux: use platform data to provide reset info
+
+In ti-linux-3.14.y we will not have a reset driver unlike ti-linux-3.12.y
+so this commit removes the dependency on the reset driver and instead
+uses the platform data that in a dt environment is configured in
+mach-omap2/pdata-quirks.c
+
+Signed-off-by: Darren Etheridge <detheridge@ti.com>
+---
+ GFX_Linux_KM/services4/srvkm/env/linux/module.c | 34 ++++++++++++++++++++-----
+ 1 file changed, 28 insertions(+), 6 deletions(-)
+
+diff --git a/GFX_Linux_KM/services4/srvkm/env/linux/module.c b/GFX_Linux_KM/services4/srvkm/env/linux/module.c
+index e03dc00..90e16ce 100644
+--- a/GFX_Linux_KM/services4/srvkm/env/linux/module.c
++++ b/GFX_Linux_KM/services4/srvkm/env/linux/module.c
+@@ -47,6 +47,10 @@ CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+ #endif
+ #endif
+ 
++#ifndef CONFIG_RESET_CONTROLLER
++#include <linux/platform_data/sgx-omap.h>
++#endif
++
+ #if defined(SUPPORT_DRI_DRM) && !defined(SUPPORT_DRI_DRM_PLUGIN)
+ #define	PVR_MOD_STATIC
+ #else
+@@ -344,9 +348,11 @@ static LDM_DRV powervr_driver = {
+ LDM_DEV *gpsPVRLDMDev;
+ 
+ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0))
++#ifdef CONFIG_RESET_CONTROLLER
+ struct reset_control *rstc;
+ bool already_deasserted = false;
+ #endif
++#endif
+ 
+ #if defined(MODULE) && defined(PVR_LDM_PLATFORM_MODULE) && \
+ 	!defined(PVR_USE_PRE_REGISTERED_PLATFORM_DEV)
+@@ -388,11 +394,14 @@ static int __devinit PVRSRVDriverProbe(LDM_DEV *pDevice, const struct pci_device
+ #endif
+ {
+ 	SYS_DATA *psSysData;
+-	int ret;	
++	int ret;
++	struct device *dev = &pDevice->dev;
++	struct gfx_sgx_platform_data *pdata = dev->platform_data;
++
+ 	PVR_TRACE(("PVRSRVDriverProbe(pDevice=%p)", pDevice));
+ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0))
++#ifdef CONFIG_RESET_CONTROLLER
+ 	rstc = reset_control_get(&pDevice->dev, NULL);
+-
+ 	if (IS_ERR(rstc)) 
+ 	{
+ 		dev_err(&pDevice->dev, "%s: error: reset_control_get\n", __func__);
+@@ -403,7 +412,7 @@ static int __devinit PVRSRVDriverProbe(LDM_DEV *pDevice, const struct pci_device
+ 
+ 	if (ret < 0)
+ 	{
+-		dev_err(&pDevice->dev, "%s: error: reset_control_clear_reset\n", __func__);
++		dev_err(dev, "%s: error: reset_control_clear_reset\n", __func__);
+ 		return ret;
+ 	}
+ 
+@@ -413,11 +422,22 @@ static int __devinit PVRSRVDriverProbe(LDM_DEV *pDevice, const struct pci_device
+ 	{
+ 		already_deasserted = true;
+ 	}
+-	else if (ret < 0) 
++	else if (ret < 0)
+ 	{
+-		dev_err(&pDevice->dev, "%s: error: reset_control_deassert\n", __func__);
++		dev_err(dev, "%s: error: reset_control_deassert\n", __func__);
+ 		return ret;
+ 	}
++#else
++	if (pdata && pdata->deassert_reset) {
++		ret = pdata->deassert_reset(pDevice, pdata->reset_name);
++		if (ret) {
++			dev_err(dev, "Unable to reset SGX!\n");
++		}
++	} else {
++		dev_err(dev, "SGX Platform data missing deassert_reset!\n");
++		return -ENODEV;
++	}
++#endif  /* CONFIG_RESET_CONTROLLER */
+ #endif
+ 
+ #if 0   /* INTEGRATION_POINT */
+@@ -432,7 +452,7 @@ static int __devinit PVRSRVDriverProbe(LDM_DEV *pDevice, const struct pci_device
+ 	{
+ 		return -EINVAL;
+ 	}
+-#endif	
++#endif
+ 	/* SysInitialise only designed to be called once.
+ 	 */
+ 	psSysData = SysAcquireDataNoCheck();
+@@ -445,6 +465,7 @@ static int __devinit PVRSRVDriverProbe(LDM_DEV *pDevice, const struct pci_device
+ 		}
+ 	}
+ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0))
++#ifdef CONFIG_RESET_CONTROLLER
+         if (!already_deasserted)
+         {
+                 ret = reset_control_is_reset(rstc);
+@@ -454,6 +475,7 @@ static int __devinit PVRSRVDriverProbe(LDM_DEV *pDevice, const struct pci_device
+                 }
+         }
+         reset_control_put(rstc);
++#endif /* CONFIG_RESET_CONTROLLER */
+ #endif
+ 
+ 	return PVRSRVIONClientCreate();
+-- 
+1.9.1
+

recipes-bsp/powervr-drivers/omap3-sgx-modules-5.01.01.01/0003-SGX-displayclass-am335x-am437x-fix-mutex-deadlock-wa.patch

@@ -0,0 +1,153 @@
+From cf5156ff82e14fe01a194f9fa9a9adc528ac72f0 Mon Sep 17 00:00:00 2001
+From: Darren Etheridge <detheridge@ti.com>
+Date: Tue, 29 Jul 2014 15:39:56 -0500
+Subject: [PATCH 3/4] SGX: displayclass: am335x, am437x - fix mutex deadlock
+ warning
+
+Rearrange the locking semantics in the Unblank screen function to
+remove the kernel warning about a possible deadlock scenario.
+
+The warning presents itself on the console like this:
+[ 2976.202979] ======================================================
+[ 2976.202983] [ INFO: possible circular locking dependency detected ]
+[ 2976.202994] 3.14.11-00997-gb20d0ac-dirty #53 Tainted: G           O
+[ 2976.202997] -------------------------------------------------------
+[ 2976.203005] OGLES2Chameleon/1203 is trying to acquire lock:
+[ 2976.203058]  (console_lock){+.+.+.}, at: [<bf07a310>]
+OMAPLFBUnblankDisplay+0x24/0xbc [omaplfb]
+[ 2976.203062]
+[ 2976.203062] but task is already holding lock:
+[ 2976.203087]  (&fb_info->lock){+.+.+.}, at: [<c0312358>]
+lock_fb_info+0x18/0x3c
+[ 2976.203090]
+[ 2976.203090] which lock already depends on the new lock.
+[ 2976.203090]
+[ 2976.203093]
+[ 2976.203093] the existing dependency chain (in reverse order) is:
+[ 2976.203101]
+[ 2976.203101] -> #1 (&fb_info->lock){+.+.+.}:
+[ 2976.203112]        [<c0312358>] lock_fb_info+0x18/0x3c
+[ 2976.203124]        [<c0313a7c>] register_framebuffer+0x174/0x26c
+[ 2976.203146]        [<c033c314>] omapfb_create_framebuffers+0x48c/0x7ac
+[ 2976.203157]        [<c033d3c4>] omapfb_probe+0x4d4/0x848
+[ 2976.203170]        [<c0381cc8>] platform_drv_probe+0x18/0x48
+[ 2976.203189]        [<c038096c>] driver_probe_device+0x10c/0x238
+[ 2976.203199]        [<c0380b2c>] __driver_attach+0x94/0x98
+[ 2976.203208]        [<c037f0f0>] bus_for_each_dev+0x54/0x88
+[ 2976.203216]        [<c03800f0>] bus_add_driver+0xd8/0x1d8
+[ 2976.203223]        [<c038115c>] driver_register+0x78/0xf4
+[ 2976.203234]        [<c0008968>] do_one_initcall+0xe4/0x144
+[ 2976.203250]        [<c07d3c18>] kernel_init_freeable+0xfc/0x1cc
+[ 2976.203261]        [<c0563260>] kernel_init+0x8/0xec
+[ 2976.203275]        [<c000e648>] ret_from_fork+0x14/0x2c
+[ 2976.203284]
+[ 2976.203284] -> #0 (console_lock){+.+.+.}:
+[ 2976.203301]        [<c008bc00>] console_lock+0x4c/0x60
+[ 2976.203328]        [<bf07a310>] OMAPLFBUnblankDisplay+0x24/0xbc [omaplfb]
+[ 2976.203340]        [<bf0797f4>] OpenDCDevice+0x60/0x78 [omaplfb]
+[ 2976.203459]        [<bf041ac0>] PVRSRVOpenDCDeviceKM+0xec/0x178 [pvrsrvkm]
+[ 2976.203654]        [<bf05645c>] PVRSRVOpenDCDeviceBW+0x6c/0xac [pvrsrvkm]
+[ 2976.203811]        [<bf056d10>] BridgedDispatchKM+0xf4/0x14c [pvrsrvkm]
+[ 2976.203966]        [<bf04f304>] PVRSRV_BridgeDispatchKM+0xf0/0x204
+[pvrsrvkm]
+[ 2976.203987]        [<c0129500>] do_vfs_ioctl+0x78/0x61c
+[ 2976.203997]        [<c0129b08>] SyS_ioctl+0x64/0x74
+[ 2976.204013]        [<c000e580>] ret_fast_syscall+0x0/0x48
+[ 2976.204016]
+[ 2976.204016] other info that might help us debug this:
+[ 2976.204016]
+[ 2976.204019]  Possible unsafe locking scenario:
+[ 2976.204019]
+[ 2976.204022]        CPU0                    CPU1
+[ 2976.204024]        ----                    ----
+[ 2976.204030]   lock(&fb_info->lock);
+[ 2976.204036]                                lock(console_lock);
+[ 2976.204041]                                lock(&fb_info->lock);
+[ 2976.204046]   lock(console_lock);
+[ 2976.204048]
+[ 2976.204048]  *** DEADLOCK ***
+[ 2976.204048]
+[ 2976.204055] 2 locks held by OGLES2Chameleon/1203:
+[ 2976.204217]  #0:  (psPVRSRVMutex#2/1){+.+.+.}, at: [<bf04f238>]
+PVRSRV_BridgeDispatchKM+0x24/0x204 [pvrsrvkm]
+[ 2976.204240]  #1:  (&fb_info->lock){+.+.+.}, at: [<c0312358>]
+lock_fb_info+0x18/0x3c
+
+Signed-off-by: Darren Etheridge <detheridge@ti.com>
+---
+ GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c | 8 +++++---
+ GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/omaplfb_linux.c | 7 +++++--
+ 2 files changed, 10 insertions(+), 5 deletions(-)
+
+diff --git a/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c b/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c
+index 3857b95..a5cc7d0 100644
+--- a/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c
++++ b/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/omaplfb_linux.c
+@@ -812,10 +812,13 @@ static OMAPLFB_ERROR OMAPLFBBlankOrUnblankDisplay(OMAPLFB_DEVINFO *psDevInfo, IM
+ {
+ #ifdef FBDEV_PRESENT
+ 	int res;
++
++	OMAPLFB_CONSOLE_LOCK();
+ 	if (!lock_fb_info(psDevInfo->psLINFBInfo))
+ 	{
+ 		printk(KERN_ERR DRIVER_PREFIX
+ 			": %s: Device %u: Couldn't lock FB info\n", __FUNCTION__,  psDevInfo->uiFBDevID);
++		OMAPLFB_CONSOLE_UNLOCK();
+ 		return (OMAPLFB_ERROR_GENERIC);
+ 	}
+ 
+@@ -825,14 +828,13 @@ static OMAPLFB_ERROR OMAPLFBBlankOrUnblankDisplay(OMAPLFB_DEVINFO *psDevInfo, IM
+ 	* notification.
+ 	*/
+ 
+-
+-	OMAPLFB_CONSOLE_LOCK();
+ 	psDevInfo->psLINFBInfo->flags |= FBINFO_MISC_USEREVENT;
+ 	res = fb_blank(psDevInfo->psLINFBInfo, bBlank ? 1 : 0);
+ 	psDevInfo->psLINFBInfo->flags &= ~FBINFO_MISC_USEREVENT;
+ 
+-	OMAPLFB_CONSOLE_UNLOCK();
+ 	unlock_fb_info(psDevInfo->psLINFBInfo);
++	OMAPLFB_CONSOLE_UNLOCK();
++
+ 	if (res != 0 && res != -EINVAL)
+ 	{
+ 		printk(KERN_ERR DRIVER_PREFIX
+diff --git a/GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/omaplfb_linux.c b/GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/omaplfb_linux.c
+index c79dbd0..58b8640 100755
+--- a/GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/omaplfb_linux.c
++++ b/GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/omaplfb_linux.c
+@@ -948,10 +948,13 @@ static OMAPLFB_ERROR OMAPLFBBlankOrUnblankDisplay(OMAPLFB_DEVINFO *psDevInfo, IM
+ {
+ #ifdef FBDEV_PRESENT
+ 	int res;
++
++	OMAPLFB_CONSOLE_LOCK();
+ 	if (!lock_fb_info(psDevInfo->psLINFBInfo))
+ 	{
+ 		printk(KERN_ERR DRIVER_PREFIX
+ 		": %s: Device %u: Couldn't lock FB info\n", __FUNCTION__,  psDevInfo->uiFBDevID);
++		OMAPLFB_CONSOLE_UNLOCK();
+ 		return (OMAPLFB_ERROR_GENERIC);
+ 	}
+ 
+@@ -961,13 +964,13 @@ static OMAPLFB_ERROR OMAPLFBBlankOrUnblankDisplay(OMAPLFB_DEVINFO *psDevInfo, IM
+ 	* notification.
+ 	*/
+ 
+-	OMAPLFB_CONSOLE_LOCK();
+ 	psDevInfo->psLINFBInfo->flags |= FBINFO_MISC_USEREVENT;
+ 	res = fb_blank(psDevInfo->psLINFBInfo, bBlank ? 1 : 0);
+ 	psDevInfo->psLINFBInfo->flags &= ~FBINFO_MISC_USEREVENT;
+ 
+-	OMAPLFB_CONSOLE_UNLOCK();
+ 	unlock_fb_info(psDevInfo->psLINFBInfo);
++	OMAPLFB_CONSOLE_UNLOCK();
++
+ 	if (res != 0 && res != -EINVAL)
+ 	{
+ 		printk(KERN_ERR DRIVER_PREFIX
+-- 
+1.9.1
+

recipes-bsp/powervr-drivers/omap3-sgx-modules-5.01.01.01/0004-SGX-linux-make-it-building-against-ti-linux-3.14.y.patch

@@ -0,0 +1,45 @@
+From c9258e090aec91e70efa814e5a38048b0c45754a Mon Sep 17 00:00:00 2001
+From: Darren Etheridge <detheridge@ti.com>
+Date: Tue, 29 Jul 2014 15:54:14 -0500
+Subject: [PATCH 4/4] SGX: linux: make it building against ti-linux-3.14.y
+
+The fbdev drivers moved into their own directory under drivers/video.
+All of the omap2 dss stuff moved there as well so update the Makefile
+to point to the right place.
+
+Keep the old directory around to not break builds against older kernel.
+
+Signed-off-by: Darren Etheridge <detheridge@ti.com>
+Signed-off-by: Denys Dmytriyenko <denys@ti.com>
+---
+ GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/Kbuild | 1 +
+ GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/Kbuild | 1 +
+ 2 files changed, 2 insertions(+)
+
+diff --git a/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/Kbuild b/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/Kbuild
+index 1ae2359..9e0c843 100755
+--- a/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/Kbuild
++++ b/GFX_Linux_KM/services4/3rdparty/dc_ti335x_linux/Kbuild
+@@ -15,6 +15,7 @@ EXTRA_CFLAGS =	-DLINUX \
+ 		-I$(PVR_BUILD_DIR)/services4/include \
+ 		-I$(PVR_BUILD_DIR)/services4/system/$(PVR_SYSTEM) \
+ 		-I$(KERNELDIR)/drivers/video/omap2 \
++		-I$(KERNELDIR)/drivers/video/fbdev/omap2 \
+ 		-I$(PVR_BUILD_DIR)/services4/system/include \
+ 		$(SYS_CFLAGS.1) \
+ 
+diff --git a/GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/Kbuild b/GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/Kbuild
+index 1ae2359..9e0c843 100755
+--- a/GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/Kbuild
++++ b/GFX_Linux_KM/services4/3rdparty/dc_ti43xx_linux/Kbuild
+@@ -15,6 +15,7 @@ EXTRA_CFLAGS =	-DLINUX \
+ 		-I$(PVR_BUILD_DIR)/services4/include \
+ 		-I$(PVR_BUILD_DIR)/services4/system/$(PVR_SYSTEM) \
+ 		-I$(KERNELDIR)/drivers/video/omap2 \
++		-I$(KERNELDIR)/drivers/video/fbdev/omap2 \
+ 		-I$(PVR_BUILD_DIR)/services4/system/include \
+ 		$(SYS_CFLAGS.1) \
+ 
+-- 
+2.0.2
+

recipes-bsp/powervr-drivers/omap3-sgx-modules_4.08.00.01.bb

@@ -1,54 +0,0 @@
-DESCRIPTION = "Kernel drivers for the PowerVR SGX chipset found in the omap3 SoCs"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=ea5743acf520dd81ca172e69f818a3d4"
-
-TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
-require ../../recipes-ti/includes/ti-eula-unpack.inc
-
-SGXPV = "4_08_00_01"
-IMGPV = "1.9.2139099"
-BINFILE = "Graphics_SDK_setuplinux_${SGXPV}.bin"
-
-inherit module
-
-MACHINE_KERNEL_PR_append = "a"
-PR = "${MACHINE_KERNEL_PR}"
-
-SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE}"
-
-SRC_URI[md5sum] = "dd0d994a48ecc4293f272a1fddddf159"
-SRC_URI[sha256sum] = "fd721288c95314e0d676dd89462e1dec994e185cb608bcb8ac4a4b5809f9693a"
-
-TI_BIN_UNPK_WDEXT="/Graphics_SDK_${SGXPV}"
-S = "${WORKDIR}${TI_BIN_UNPK_WDEXT}/GFX_Linux_KM"
-
-PVRBUILD = "release"
-export KERNELDIR = "${STAGING_KERNEL_DIR}"
-
-INHIBIT_PACKAGE_STRIP = "1"
-
-TI_PLATFORM_omap3 = "omap3630"
-TI_PLATFORM_ti814x = "ti81xx"
-TI_PLATFORM_ti816x = "ti81xx"
-TI_PLATFORM_ti33x = "ti335x"
-
-MODULESLOCATION_omap3 = "dc_omapfb3_linux"
-MODULESLOCATION_ti814x = "dc_ti81xx_linux"
-MODULESLOCATION_ti816x = "dc_ti81xx_linux"
-MODULESLOCATION_ti33x = "dc_ti335x_linux"
-
-export SUPPORT_XORG ?= "${@base_contains('DISTRO_FEATURES', 'x11', '1', '0', d)}"
-
-MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=${SUPPORT_XORG}"
-
-do_install() {
-    mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
-    cp  ${S}/pvrsrvkm.ko \
-        ${S}/services4/3rdparty/${MODULESLOCATION}/omaplfb.ko  \
-        ${S}/services4/3rdparty/bufferclass_ti/bufferclass_ti.ko \
-        ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
-
-    if [ "${SUPPORT_XORG}" = "1" ]; then
-        cp ${S}/services4/3rdparty/linux_drm/drm.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
-    fi
-}

recipes-bsp/powervr-drivers/omap3-sgx-modules_4.08.00.02.bb

@@ -1,54 +0,0 @@
-DESCRIPTION = "Kernel drivers for the PowerVR SGX chipset found in the omap3 SoCs"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=ea5743acf520dd81ca172e69f818a3d4"
-
-TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
-require ../../recipes-ti/includes/ti-eula-unpack.inc
-
-SGXPV = "4_08_00_02"
-IMGPV = "1.9.2188537"
-BINFILE = "Graphics_SDK_setuplinux_${SGXPV}_minimal_demos.bin"
-
-inherit module
-
-MACHINE_KERNEL_PR_append = "a"
-PR = "${MACHINE_KERNEL_PR}"
-
-SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/gfxsdk/${SGXPV}/exports/${BINFILE}"
-
-SRC_URI[md5sum] = "0efa3a38266e6f41f8cc4fad0187f0d6"
-SRC_URI[sha256sum] = "c732044b515a598e1fab661b7463aa9c53d4fa37f4980dfa85cd02b7468d0cd9"
-
-TI_BIN_UNPK_WDEXT="/Graphics_SDK_${SGXPV}"
-S = "${WORKDIR}${TI_BIN_UNPK_WDEXT}/GFX_Linux_KM"
-
-PVRBUILD = "release"
-export KERNELDIR = "${STAGING_KERNEL_DIR}"
-
-INHIBIT_PACKAGE_STRIP = "1"
-
-TI_PLATFORM_omap3 = "omap3630"
-TI_PLATFORM_ti814x = "ti81xx"
-TI_PLATFORM_ti816x = "ti81xx"
-TI_PLATFORM_ti33x = "ti335x"
-
-MODULESLOCATION_omap3 = "dc_omapfb3_linux"
-MODULESLOCATION_ti814x = "dc_ti81xx_linux"
-MODULESLOCATION_ti816x = "dc_ti81xx_linux"
-MODULESLOCATION_ti33x = "dc_ti335x_linux"
-
-export SUPPORT_XORG ?= "${@base_contains('DISTRO_FEATURES', 'x11', '1', '0', d)}"
-
-MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=${SUPPORT_XORG}"
-
-do_install() {
-    mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
-    cp  ${S}/pvrsrvkm.ko \
-        ${S}/services4/3rdparty/${MODULESLOCATION}/omaplfb.ko  \
-        ${S}/services4/3rdparty/bufferclass_ti/bufferclass_ti.ko \
-        ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
-
-    if [ "${SUPPORT_XORG}" = "1" ]; then
-        cp ${S}/services4/3rdparty/linux_drm/drm.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
-    fi
-}

recipes-bsp/powervr-drivers/omap3-sgx-modules_5.00.00.01.bb

@@ -1,67 +0,0 @@
-DESCRIPTION = "Kernel drivers for the PowerVR SGX chipset found in the omap3 SoCs"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://GPL-COPYING;md5=60422928ba677faaa13d6ab5f5baaa1e"
-
-TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
-require ../../recipes-ti/includes/ti-eula-unpack.inc
-
-SGXPV = "5_00_00_01"
-IMGPV = "1.10.2359475"
-
-inherit module
-
-MACHINE_KERNEL_PR_append = "a"
-PR = "${MACHINE_KERNEL_PR}"
-
-BINFILE_HARDFP = "Graphics_SDK_setuplinux_${SGXPV}_alpha_hardfp_minimal_demos.bin"
-MD5SUM_HARDFP = "ae6125d7f8a313ea5c02afded893052d"
-SHA256SUM_HARDFP = "c2782a2f85024741722b936ec9dca66b858ae8561aa71b693f11e12d8c0385e0"
-
-# For now we only have hardfp version
-python __anonymous() {
-    tunes = bb.data.getVar("TUNE_FEATURES", d, 1)
-    if not tunes:
-        return
-    pkgn = bb.data.getVar("PN", d, 1)
-    pkgv = bb.data.getVar("PV", d, 1)
-    if "callconvention-hard" not in tunes:
-        bb.warn("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
-        raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
-}
-
-BINFILE := "${BINFILE_HARDFP}"
-
-SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/gfxsdk/${SGXPV}/exports/${BINFILE}"
-
-SRC_URI[md5sum] := "${MD5SUM_HARDFP}"
-SRC_URI[sha256sum] := "${SHA256SUM_HARDFP}"
-
-TI_BIN_UNPK_WDEXT="/Graphics_SDK_${SGXPV}"
-S = "${WORKDIR}${TI_BIN_UNPK_WDEXT}/GFX_Linux_KM"
-
-PVRBUILD = "release"
-export KERNELDIR = "${STAGING_KERNEL_DIR}"
-
-INHIBIT_PACKAGE_STRIP = "1"
-
-TI_PLATFORM_omap3 = "omap3630"
-TI_PLATFORM_ti814x = "ti81xx"
-TI_PLATFORM_ti816x = "ti81xx"
-TI_PLATFORM_ti33x = "ti335x"
-TI_PLATFORM_ti43x = "ti43xx"
-
-MODULESLOCATION_omap3 = "dc_omapfb3_linux"
-MODULESLOCATION_ti814x = "dc_ti81xx_linux"
-MODULESLOCATION_ti816x = "dc_ti81xx_linux"
-MODULESLOCATION_ti33x = "dc_ti335x_linux"
-MODULESLOCATION_ti43x = "dc_ti43xx_linux"
-
-MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=${SUPPORT_XORG}"
-
-do_install() {
-    mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
-    cp  ${S}/pvrsrvkm.ko \
-        ${S}/services4/3rdparty/${MODULESLOCATION}/omaplfb.ko  \
-        ${S}/services4/3rdparty/bufferclass_ti/bufferclass_ti.ko \
-        ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
-}

recipes-bsp/powervr-drivers/omap3-sgx-modules_5.01.00.01.bb

@@ -1,67 +0,0 @@
-DESCRIPTION = "Kernel drivers for the PowerVR SGX chipset found in the omap3 SoCs"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://GPL-COPYING;md5=60422928ba677faaa13d6ab5f5baaa1e"
-
-TI_BIN_UNPK_CMDS="Y: qY:workdir:Y"
-require ../../recipes-ti/includes/ti-eula-unpack.inc
-
-SGXPV = "5_01_00_01"
-IMGPV = "1.10.2359475"
-
-inherit module
-
-MACHINE_KERNEL_PR_append = "a"
-PR = "${MACHINE_KERNEL_PR}"
-
-BINFILE_HARDFP = "Graphics_SDK_setuplinux_hardfp_${SGXPV}.bin"
-MD5SUM_HARDFP = "0ee7d59808330d442a51c0990c2cb30e"
-SHA256SUM_HARDFP = "769daae439677a7a85bbbced14cee4f85b19823e0b99560078d0a864c525c128"
-
-# For now we only have hardfp version
-python __anonymous() {
-    tunes = bb.data.getVar("TUNE_FEATURES", d, 1)
-    if not tunes:
-        return
-    pkgn = bb.data.getVar("PN", d, 1)
-    pkgv = bb.data.getVar("PV", d, 1)
-    if "callconvention-hard" not in tunes:
-        bb.warn("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
-        raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
-}
-
-BINFILE := "${BINFILE_HARDFP}"
-
-SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/gfxsdk/${SGXPV}/exports/${BINFILE}"
-
-SRC_URI[md5sum] := "${MD5SUM_HARDFP}"
-SRC_URI[sha256sum] := "${SHA256SUM_HARDFP}"
-
-TI_BIN_UNPK_WDEXT="/Graphics_SDK_${SGXPV}"
-S = "${WORKDIR}${TI_BIN_UNPK_WDEXT}/GFX_Linux_KM"
-
-PVRBUILD = "release"
-export KERNELDIR = "${STAGING_KERNEL_DIR}"
-
-INHIBIT_PACKAGE_STRIP = "1"
-
-TI_PLATFORM_omap3 = "omap3630"
-TI_PLATFORM_ti814x = "ti81xx"
-TI_PLATFORM_ti816x = "ti81xx"
-TI_PLATFORM_ti33x = "ti335x"
-TI_PLATFORM_ti43x = "ti43xx"
-
-MODULESLOCATION_omap3 = "dc_omapfb3_linux"
-MODULESLOCATION_ti814x = "dc_ti81xx_linux"
-MODULESLOCATION_ti816x = "dc_ti81xx_linux"
-MODULESLOCATION_ti33x = "dc_ti335x_linux"
-MODULESLOCATION_ti43x = "dc_ti43xx_linux"
-
-MAKE_TARGETS = " BUILD=${PVRBUILD} TI_PLATFORM=${TI_PLATFORM} SUPPORT_XORG=${SUPPORT_XORG}"
-
-do_install() {
-    mkdir -p ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
-    cp  ${S}/pvrsrvkm.ko \
-        ${S}/services4/3rdparty/${MODULESLOCATION}/omaplfb.ko  \
-        ${S}/services4/3rdparty/bufferclass_ti/bufferclass_ti.ko \
-        ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/gpu/pvr
-}

recipes-bsp/powervr-drivers/omap3-sgx-modules_5.01.01.01.bb

@@ -10,7 +10,7 @@ IMGPV = "1.10.2359475"
 
 inherit module
 
-MACHINE_KERNEL_PR_append = "a"
+MACHINE_KERNEL_PR_append = "c"
 PR = "${MACHINE_KERNEL_PR}"
 
 BINFILE_HARDFP = "Graphics_SDK_setuplinux_hardfp_${SGXPV}.bin"
@@ -33,6 +33,11 @@ BINFILE := "${BINFILE_HARDFP}"
 
 SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/gfxsdk/${SGXPV}/exports/${BINFILE}"
 
+SRC_URI += "file://0001-PoC-GFX-SDK-Make-5_01_01_01-work-against-3.14-LTS.patch;striplevel=2 \
+            file://0002-SGX-linux-use-platform-data-to-provide-reset-info.patch;striplevel=2 \
+            file://0003-SGX-displayclass-am335x-am437x-fix-mutex-deadlock-wa.patch;striplevel=2 \
+            file://0004-SGX-linux-make-it-building-against-ti-linux-3.14.y.patch;striplevel=2"
+
 SRC_URI[md5sum] := "${MD5SUM_HARDFP}"
 SRC_URI[sha256sum] := "${SHA256SUM_HARDFP}"
 

recipes-bsp/powervr-drivers/omapdrm-pvr_1.9.2253347.bb

@@ -1,22 +1,22 @@
 DESCRIPTION =  "Kernel drivers for the PowerVR SGX chipset found in the omap5 SoCs"
 HOMEPAGE = "http://git.ti.com"
 LICENSE = "MIT | GPLv2"
-LIC_FILES_CHKSUM = "file://README;beginline=13;endline=22;md5=74506d9b8e5edbce66c2747c50fcef12"
+LIC_FILES_CHKSUM = "file://eurasia_km/README;beginline=13;endline=22;md5=74506d9b8e5edbce66c2747c50fcef12"
 
 inherit module
 
-MACHINE_KERNEL_PR_append = "a"
+MACHINE_KERNEL_PR_append = "b"
 PR = "${MACHINE_KERNEL_PR}"
 
 SRC_URI = "git://git.ti.com/graphics/omap5-sgx-ddk-linux.git;protocol=git"
 S = "${WORKDIR}/git"
 
-SRCREV = "86a4ffae3458c51f0a58e44b17b7a4fd92d2b8c6"
+SRCREV = "bf8997b894f216261f914f64d33e6e588770da5a"
 
 EXTRA_OEMAKE += 'KERNELDIR="${STAGING_KERNEL_DIR}"'
 
 do_compile_prepend() {
-    cd ${S}/eurasiacon/build/linux2/omap5430_linux
+    cd ${S}/eurasia_km/eurasiacon/build/linux2/omap5430_linux
 }
 
 do_install() {

recipes-bsp/qmss-lld/qmss-lld-test_git.bb

@@ -0,0 +1,27 @@
+DESCRIPTION = "TI QMSS low level driver unit test and example binaries"
+COMPATIBLE_MACHINE = "keystone"
+
+DEPENDS="common-csl-ip rm-lld cppi-lld qmss-lld"
+
+include qmss-lld.inc
+
+CHOICELIST = "yes no"
+
+do_compile () {
+#   Now build the lld in the updated directory
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" QMSS_SRC_DIR=${S}
+		for choice in ${CHOICELIST}
+		do
+			make -f makefile_armv7 tests examples PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" QMSS_SRC_DIR=${S} USEDYNAMIC_LIB="$choice"
+		done
+	done
+}
+
+do_install () {
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 installbin PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" QMSS_SRC_DIR=${S} INSTALL_BIN_BASE_DIR=${D}${bindir}
+	done
+}

recipes-bsp/qmss-lld/qmss-lld.inc

@@ -0,0 +1,15 @@
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/drv/qmss/COPYING.txt;md5=e8f6789acdcda76d02ed9203fc2e603d"
+
+BRANCH ="master"
+SRC_URI = "git://git.ti.com/keystone-rtos/qmss-lld.git;destsuffix=git/ti/drv/qmss;protocol=git;branch=${BRANCH}"
+
+# commit ID corresponding to DEV.QMSS_LLD.02.01.00.06
+SRCREV = "661fff76530fd56cf7550f76c7b7a541ea18fda8"
+PV = "02.01.00.06"
+PR = "r0"
+
+DEVICELIST = "k2h k2k k2l k2e"
+
+BASEDIR = "${WORKDIR}/git"
+S = "${BASEDIR}/ti/drv/qmss"

recipes-bsp/qmss-lld/qmss-lld_git.bb

@@ -0,0 +1,20 @@
+DESCRIPTION = "TI QMSS low level driver library"
+COMPATIBLE_MACHINE = "keystone"
+
+DEPENDS="common-csl-ip rm-lld"
+
+include qmss-lld.inc
+
+do_compile () {
+#   Now build the lld
+    make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR}
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 lib PDK_INSTALL_PATH=${STAGING_INCDIR}  DEVICE="${device}"
+	done
+
+}
+
+do_install () {
+    make -f makefile_armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
+}

recipes-bsp/rm-lld/rm-lld_git.bb

@@ -0,0 +1,41 @@
+DESCRIPTION = "TI Resource Manager Low Level Driver"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/drv/rm/COPYING.txt;md5=dc61631b65360e6beb73b6c337800afc"
+
+BRANCH="master"
+SRC_URI = "git://git.ti.com/keystone-rtos/rm-lld.git;destsuffix=git/ti/drv/rm;protocol=git;branch=${BRANCH}"
+# Below commit ID corresponds to DEV.RM_LLD.02.01.00.06
+SRCREV = "dc0dba4a6b0358efcb861d50b3dae21beb5281a8"
+PV = "02.01.00.06"
+PR = "r0"
+
+COMPATIBLE_MACHINE = "keystone"
+
+DEPENDS = "ti-ipc libdaemon"
+
+PACKAGES =+ "${PN}-test"
+
+FILES_${PN}-test = "${bindir}/rmDspClientTest_*.out \
+                    ${bindir}/rmLinuxClientTest_*.out \
+                    ${bindir}/ti/drv/rm/test/dts_files/*.dtb"
+
+CHOICELIST = "yes no"
+
+BASEDIR = "${WORKDIR}/git"
+S = "${BASEDIR}/ti/drv/rm"
+
+do_compile () {
+#   Now build the lld
+    make -f makefile_armv7 clean lib PDK_INSTALL_PATH=${STAGING_INCDIR} RM_SRC_DIR=${S}
+    for choice in ${CHOICELIST}
+    do
+      make -f makefile_armv7 tests IPC_DEVKIT_INSTALL_PATH=${STAGING_INCDIR} PDK_INSTALL_PATH=${BASEDIR} USEDYNAMIC_LIB="$choice"
+    done
+}
+
+do_install () {
+    install -d ${D}${includedir}/ti/drv/rm
+    install -d ${D}${libdir}
+    install -d ${D}${bindir}
+    make -f makefile_armv7 install installbin installbin_test INSTALL_INC_BASE_DIR=${D}${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir} INSTALL_BIN_BASE_DIR=${D}${bindir}
+}

recipes-bsp/sa-lld/sa-lld-test_git.bb

@@ -0,0 +1,33 @@
+DESCRIPTION = "TI Security Accelerator LLD (SA LLD) Examples"
+
+DEPENDS = "common-csl-ip cppi-lld qmss-lld pa-lld sa-lld"
+
+include sa-lld.inc
+
+DEVICELIST = "k2h k2k k2l k2e"
+
+CHOICELIST = "no yes"
+
+do_compile () {
+#   Now build the lld in the updated directory
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 clean PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" SA_SRC_DIR=${S}
+		for choice in ${CHOICELIST}
+		do
+			make -f makefile_armv7 examples PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" SA_SRC_DIR=${S} USEDYNAMIC_LIB="$choice"
+		done
+	done
+}
+
+do_install () {
+	install -d ${D}${bindir}/ti/drv/sa/example/SaBasicExample/vectors
+
+# copy all the test vectors
+	find example/SaBasicExample/vectors -name *.bin -type f | xargs -I {} cp --parents {} ${D}${bindir}/ti/drv/sa
+
+	for device in ${DEVICELIST}
+	do
+		make -f makefile_armv7 installbin PDK_INSTALL_PATH=${STAGING_INCDIR} DEVICE="$device" SA_SRC_DIR=${S} INSTALL_BIN_BASE_DIR=${D}${bindir}
+	done
+}

recipes-bsp/sa-lld/sa-lld.inc

@@ -0,0 +1,14 @@
+LICENSE = "BSD-3-Clause"
+COMPATIBLE_MACHINE = "keystone"
+
+LIC_FILES_CHKSUM = "file://${WORKDIR}/git/ti/drv/sa/COPYING.txt;md5=4709d353574a9569e129ebdf20e732dd"
+
+BRANCH = "master"
+SRC_URI = "git://git.ti.com/keystone-rtos/sa-lld.git;destsuffix=git/ti/drv/sa;protocol=git;branch=${BRANCH}"
+# Following commit DEV.SA_LLD.03.00.00.08
+SRCREV = "4da032c600ded79ab226a2a0100c1d8178a9da39"
+PV = "03.00.00.08"
+PR = "r0"
+
+BASEDIR = "${WORKDIR}/git"
+S = "${BASEDIR}/ti/drv/sa"

recipes-bsp/sa-lld/sa-lld_git.bb

@@ -0,0 +1,14 @@
+DESCRIPTION = "TI Security Accelerator LLD (SA LLD) Library"
+
+DEPENDS = "common-csl-ip"
+
+include sa-lld.inc
+
+do_compile () {
+#   Now build the lld in the updated directory
+	make -f makefile_armv7 clean lib PDK_INSTALL_PATH=${STAGING_INCDIR}
+}
+
+do_install () {
+	make -f makefile_armv7 install PDK_INSTALL_PATH=${STAGING_INCDIR} INSTALL_INC_BASE_DIR=${D}/${includedir} INSTALL_LIB_BASE_DIR=${D}${libdir}
+}

recipes-bsp/ti/am33x-cm3/init-am33x-cm3

@@ -1,6 +0,0 @@
-#!/bin/sh
-
-# Load the PM CM3 firmware
-echo 1 > /sys/devices/ocp.2/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/loading
-cat /lib/firmware/am335x-pm-firmware.bin > /sys/devices/ocp.2/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/data
-echo 0 > /sys/devices/ocp.2/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/loading

recipes-bsp/ti/am33x-cm3/init-am43x-cm3

@@ -1,6 +0,0 @@
-#!/bin/sh
-
-# Load the PM CM3 firmware
-echo 1 > /sys/devices/44000000.ocp/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/loading
-cat /lib/firmware/am335x-pm-firmware.bin > /sys/devices/44000000.ocp/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/data
-echo 0 > /sys/devices/44000000.ocp/44d00000.wkup_m3/firmware/am335x-pm-firmware.bin/loading

recipes-bsp/ti/am33x-cm3_git.bb

@@ -1,55 +0,0 @@
-DESCRIPTION = "Cortex-M3 binary blob for suspend-resume"
-
-LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://License.txt;md5=7bdc54a749ab7a7dea999d25d99a41b8"
-
-PV = "05.00.00.03"
-PR = "r1"
-
-# Make package machine specific due to different init scripts
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-# SRCREV corresponds to tag v05.00.00.03
-SRCREV = "a0ddffb63147e2079a08944c0e399c75538201a9"
-BRANCH ?= "master"
-
-# This init script is only used for older kernels that do not support
-# hotplug of the firmware.  Newer kernels do not require the initscript
-# package.
-INITSCRIPT_NAME = "am335x-pm-firmware-load"
-INITSCRIPT_PARAMS = "defaults 96"
-
-inherit update-rc.d
-
-UPDATERCPN = "${PN}-initscript"
-
-RDEPENDS_${PN}-initscript = "am33x-cm3"
-
-SRC_URI = "git://arago-project.org/git/projects/am33x-cm3.git;protocol=git;branch=${BRANCH} \
-           file://init-am33x-cm3 \
-           file://init-am43x-cm3 \
-          "
-
-SCRIPT_ti33x = "init-am33x-cm3"
-SCRIPT_ti43x = "init-am43x-cm3"
-
-S = "${WORKDIR}/git"
-
-do_compile() {
-	make CROSS_COMPILE="${TARGET_PREFIX}"
-}
-
-do_install() {
-	install -d ${D}${base_libdir}/firmware
-	install -m 0644 bin/am335x-pm-firmware.bin ${D}${base_libdir}/firmware/
-
-	# Install the init script to load the PM firmware at boot
-	install -d ${D}${sysconfdir}/init.d
-	install -m 0755 ${WORKDIR}/${SCRIPT} ${D}${sysconfdir}/init.d/${INITSCRIPT_NAME}
-}
-
-PACKAGES =+ "${PN}-initscript"
-
-FILES_${PN} += "${base_libdir}/firmware"
-
-FILES_${PN}-initscript = "${sysconfdir}/*"

recipes-bsp/u-boot/u-boot-am180x-2010.12/am180x-evm/0001-da850evm-change-default-memory-to-not-limit-at-32MB.patch

@@ -1,34 +0,0 @@
-From df5c87c4e1be1670475eba1187301a2f7a7aca30 Mon Sep 17 00:00:00 2001
-From: Chase Maupin <Chase.Maupin@ti.com>
-Date: Wed, 22 Jun 2011 12:12:09 -0500
-Subject: [PATCH] da850evm: change default memory to not limit at 32MB
-
-* Change the default mem= option passed to the Linux kernel to
-  not limit the memory to 32MB.
-* This change is used by AM devices that do not need to reserve
-  space for the DSP image.  By removing the mem= option we get
-  access to all of the memory on the system.
-* Limiting the memory to 32MB causes out-of-memory errors
-  when running large applications such as web browsers
-
-Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
----
- include/configs/da850evm.h |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
-index 4a1e0af..55badc9 100755
---- a/include/configs/da850evm.h
-+++ b/include/configs/da850evm.h
-@@ -184,7 +184,7 @@
- #define CONFIG_CMDLINE_TAG
- #define CONFIG_REVISION_TAG
- #define CONFIG_SETUP_MEMORY_TAGS
--#define CONFIG_BOOTARGS		"mem=32M console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootwait ip=off"
-+#define CONFIG_BOOTARGS		"console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw rootwait ip=off"
- #define CONFIG_BOOTCOMMAND	"if mmc rescan 0; then if fatload mmc 0 0xc0600000 boot.scr; then source 0xc0600000; else fatload mmc 0 0xc0700000 uImage; bootm c0700000; fi; else sf probe 0; sf read 0xc0700000 0x80000 0x220000; bootm 0xc0700000; fi"
- #define CONFIG_BOOTDELAY	3
- 
--- 
-1.7.0.4
-

recipes-bsp/u-boot/u-boot-am180x_2010.12.bb

@@ -1,22 +0,0 @@
-require u-boot-ti.inc
-
-DESCRIPTION = "u-boot bootloader for AM180x devices"
-LIC_FILES_CHKSUM = "file://COPYING;md5=4c6cde5df68eff615d36789dc18edd3b"
-
-COMPATIBLE_MACHINE = "am180x-evm"
-
-PR = "r0"
-
-SRC_URI = "git://arago-project.org/git/projects/u-boot-davinci.git;protocol=git;branch=${BRANCH}"
-
-# For the am180x we want to enable all the memory on the EVM, but for other
-# devices that use the DSP we do not want this change because that memory
-# is used for the DSP
-SRC_URI_append_am180x-evm = " file://0001-da850evm-change-default-memory-to-not-limit-at-32MB.patch"
-
-BRANCH = "03.21.00.03"
-
-# v2010.12_DAVINCIPSP_03.21.00.04
-SRCREV = "1254a0b58d900b7035cfb36bf4e1b05dfbf09997"
-
-UBOOT_SUFFIX = "bin"

recipes-bsp/u-boot/u-boot-am33x_2011.10rc.bb

@@ -1,27 +0,0 @@
-require u-boot-ti.inc
-
-# No patches for other machines yet
-COMPATIBLE_MACHINE = "(ti33x)"
-
-DEFAULT_PREFERENCE_ti33x = "99"
-
-PV = "2011.09+git"
-PR = "r30"
-
-SPL_BINARY = "MLO"
-
-SRC_URI = "git://arago-project.org/git/projects/u-boot-am33x.git;protocol=git;branch=master \
-           file://2011.09git/0001-am335x_evm-add-option-to-boot-kernel-from-boot-in-ex.patch \
-           file://2011.09git/0002-am335x_evm-set-bootdelay-to-1.patch \
-           file://2011.09git/0003-am335x-evm-make-MMC-rootfs-RO-on-boot-so-fsck-works.patch \
-           file://2011.09git/0004-am335x_evm-switch-to-ext4.patch \
-           file://2011.09git/0005-am335x-evm-enable-i2c2-pinmux-for-beaglebone.patch \
-           file://2011.09git/0006-ext2load-increase-read-speed.patch \
-           file://2011.09git/0007-am335x-evm-fix-ext2load-and-specify-partition-for-bo.patch \
-           file://2011.09git/0008-am335x-evm-load-uImage-from-boot-instead-of-VFAT.patch \
-           file://2011.09git/0009-ext4fs-ls-load-support.patch \
-           file://2011.09git/0010-am335x-switch-to-ext4-mode.patch \
-           file://0001-config-Always-use-GNU-ld.patch \
-          "
-
-SRCREV = "dc52533ccff00a12761f793d66b39e4f6a4a3bba"

recipes-bsp/u-boot/u-boot-am3517_2011.09.bb

@@ -1,21 +0,0 @@
-require u-boot-ti.inc
-
-DESCRIPTION = "u-boot bootloader for ARM MPU devices"
-
-COMPATIBLE_MACHINE = "omap3"
-
-DEFAULT_PREFERENCE = "-1"
-
-PR = "r1+gitr${SRCPV}"
-
-SRC_URI = "git://arago-project.org/git/projects/u-boot-am33x.git;protocol=git;branch=${BRANCH} \
-           file://0001-armv7-Unaligned-access-fix.patch \
-"
-
-BRANCH = "AM335XPSP_04.06.00.08"
-
-# Lock to the commit corresponding to tag "v2011.09_AM335xPSP_04.06.00.08"
-SRCREV = "1e4626f0d5f3bb04ec974e76a5d9029875269d31"
-
-# Set the name of the SPL that will built so that it is also packaged with u-boot.
-SPL_BINARY = "MLO"

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch

@@ -1,172 +0,0 @@
-From e0820ccc38315d88192c19e98ea9b59d3ec7d4c8 Mon Sep 17 00:00:00 2001
-From: Tom Rini <trini@ti.com>
-Date: Tue, 8 May 2012 07:29:31 +0000
-Subject: [PATCH] ARM: omap3: Set SPL stack size to 8KB, image to 54KB.
-
-With older toolchains it is possible to not fit entirely into the 45KB
-that we had assigned to SPL.  Adjust to allow for 8KB of stack (which
-should be more than required) and 54KB of text/data.
-
-Cc: Vaibhav Hiremath <hvaibhav@ti.com>
-Cc: Nagendra T S <nagendra@mistralsolutions.com>
-Cc: Thomas Weber <weber@corscience.de>
-Cc: Ilya Yanok <yanok@emcraft.com>
-Cc: Steve Sakoman <sakoman@gmail.com>
-Cc: Stefano Babic <sbabic@denx.de>
-Signed-off-by: Tom Rini <trini@ti.com>
-Acked-by: Stefano Babic <sbabic@denx.de>
-Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
----
- doc/SPL/README.omap3               |    4 ++--
- include/configs/am3517_crane.h     |    2 +-
- include/configs/am3517_evm.h       |    2 +-
- include/configs/devkit8000.h       |    2 +-
- include/configs/mcx.h              |    2 +-
- include/configs/omap3_beagle.h     |    2 +-
- include/configs/omap3_evm_common.h |    2 +-
- include/configs/omap3_overo.h      |    2 +-
- include/configs/tam3517-common.h   |    2 +-
- include/configs/tricorder.h        |    2 +-
- 10 files changed, 11 insertions(+), 11 deletions(-)
-
-diff --git a/doc/SPL/README.omap3 b/doc/SPL/README.omap3
-index cc5d5c0..a543e65 100644
---- a/doc/SPL/README.omap3
-+++ b/doc/SPL/README.omap3
-@@ -34,14 +34,14 @@ DDR1: 0x80000000 - 0xBFFFFFFF
- 
- Option 1 (SPL only):
- 0x40200800 - 0x4020BBFF: Area for SPL text, data and rodata
--0x4020BC00 - 0x4020FFFC: Area for the SPL stack.
-+0x4020E000 - 0x4020FFFC: Area for the SPL stack.
- 0x80000000 - 0x8007FFFF: Area for the SPL BSS.
- 0x80100000: CONFIG_SYS_TEXT_BASE of U-Boot
- 0x80208000 - 0x80307FFF: malloc() pool available to SPL.
- 
- Option 2 (SPL or X-Loader):
- 0x40200800 - 0x4020BBFF: Area for SPL text, data and rodata
--0x4020BC00 - 0x4020FFFC: Area for the SPL stack.
-+0x4020E000 - 0x4020FFFC: Area for the SPL stack.
- 0x80008000: CONFIG_SYS_TEXT_BASE of U-Boot
- 0x87000000 - 0x8707FFFF: Area for the SPL BSS.
- 0x87080000 - 0x870FFFFF: malloc() pool available to SPL.
-diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
-index 71321f3..1233985 100644
---- a/include/configs/am3517_crane.h
-+++ b/include/configs/am3517_crane.h
-@@ -325,7 +325,7 @@
- #define CONFIG_SPL
- #define CONFIG_SPL_NAND_SIMPLE
- #define CONFIG_SPL_TEXT_BASE		0x40200800
--#define CONFIG_SPL_MAX_SIZE		(45 * 1024)
-+#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
- #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
- 
- #define CONFIG_SPL_BSS_START_ADDR	0x80000000
-diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
-index bbd19de..ff8d1b0 100644
---- a/include/configs/am3517_evm.h
-+++ b/include/configs/am3517_evm.h
-@@ -324,7 +324,7 @@
- #define CONFIG_SPL
- #define CONFIG_SPL_NAND_SIMPLE
- #define CONFIG_SPL_TEXT_BASE		0x40200800
--#define CONFIG_SPL_MAX_SIZE		(45 * 1024)
-+#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
- #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
- 
- #define CONFIG_SPL_BSS_START_ADDR	0x80000000
-diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
-index eb7c376..248a5b2 100644
---- a/include/configs/devkit8000.h
-+++ b/include/configs/devkit8000.h
-@@ -324,7 +324,7 @@
- #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
- 
- #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
--#define CONFIG_SPL_MAX_SIZE		0xB400  /* 45 K */
-+#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
- #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
- 
- #define CONFIG_SPL_BSS_START_ADDR       0x80000500 /* leave space for bootargs*/
-diff --git a/include/configs/mcx.h b/include/configs/mcx.h
-index e190e3e..f6a83a8 100644
---- a/include/configs/mcx.h
-+++ b/include/configs/mcx.h
-@@ -325,7 +325,7 @@
- #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
- 
- #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
--#define CONFIG_SPL_MAX_SIZE		(45 << 10)
-+#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
- #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
- 
- /* move malloc and bss high to prevent clashing with the main image */
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index ddeb414..6bdc2c3 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -399,7 +399,7 @@
- #define CONFIG_SPL
- #define CONFIG_SPL_NAND_SIMPLE
- #define CONFIG_SPL_TEXT_BASE		0x40200800
--#define CONFIG_SPL_MAX_SIZE		(45 * 1024)
-+#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
- #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
- 
- #define CONFIG_SPL_BSS_START_ADDR	0x80000000
-diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
-index 4910dda..47ebbef 100644
---- a/include/configs/omap3_evm_common.h
-+++ b/include/configs/omap3_evm_common.h
-@@ -282,7 +282,7 @@
- /* Defines for SPL */
- #define CONFIG_SPL
- #define CONFIG_SPL_TEXT_BASE		0x40200800
--#define CONFIG_SPL_MAX_SIZE		(45 * 1024)	/* 45 KB */
-+#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
- #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
- 
- #define CONFIG_SPL_BSS_START_ADDR	0x80000000
-diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
-index 64adc74..b0d144f 100644
---- a/include/configs/omap3_overo.h
-+++ b/include/configs/omap3_overo.h
-@@ -303,7 +303,7 @@
- #define CONFIG_SPL
- #define CONFIG_SPL_NAND_SIMPLE
- #define CONFIG_SPL_TEXT_BASE		0x40200800
--#define CONFIG_SPL_MAX_SIZE		(45 * 1024)
-+#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
- #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
- 
- /* move malloc and bss high to prevent clashing with the main image */
-diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h
-index 37eb87b..3fc2c44 100644
---- a/include/configs/tam3517-common.h
-+++ b/include/configs/tam3517-common.h
-@@ -257,7 +257,7 @@
- #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
- 
- #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
--#define CONFIG_SPL_MAX_SIZE		(45 << 10)	/* 45 K */
-+#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
- #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
- 
- #define CONFIG_SYS_SPL_MALLOC_START	0x8f000000
-diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
-index 801a24f..ab911aa 100644
---- a/include/configs/tricorder.h
-+++ b/include/configs/tricorder.h
-@@ -293,7 +293,7 @@
- #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
- 
- #define CONFIG_SPL_TEXT_BASE		0x40200000 /*CONFIG_SYS_SRAM_START*/
--#define CONFIG_SPL_MAX_SIZE		0xB400  /* 45 K */
-+#define CONFIG_SPL_MAX_SIZE		(54 * 1024)	/* 8 KB for stack */
- #define CONFIG_SPL_STACK		LOW_LEVEL_SRAM_STACK
- 
- #define CONFIG_SPL_BSS_START_ADDR	0x80000000 /*CONFIG_SYS_SDRAM_BASE*/
--- 
-1.7.0.4
-

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch

@@ -1,31 +0,0 @@
-From 55161fca67023d6be30bdea495cc0fdbae316a64 Mon Sep 17 00:00:00 2001
-From: Tom Rini <trini@ti.com>
-Date: Wed, 9 Nov 2011 11:48:21 -0700
-Subject: [PATCH 1/4] OMAP3 Beagle: Set BOOTDELAY to 3
-
-This is TI Sitara SDK specific (unified user experience, 3s delay).
-
-Upstream-Status: Pending
-    * This will be submitted upstream by Tom Rini
-
-Signed-off-by: Tom Rini <trini@ti.com>
----
- include/configs/omap3_beagle.h |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 58a29b8..ba73aa6 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -213,7 +213,7 @@
- 							/* partition */
- 
- /* Environment information */
--#define CONFIG_BOOTDELAY		2
-+#define CONFIG_BOOTDELAY		3
- 
- #define CONFIG_EXTRA_ENV_SETTINGS \
- 	"loadaddr=0x80200000\0" \
--- 
-1.7.0.4
-

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-omap3_beagle-add-usbethaddr-setting-to-enable-networ.patch

@@ -1,40 +0,0 @@
-From c56786770eb0ccb95204cb72b961c44c65ff343b Mon Sep 17 00:00:00 2001
-From: Chase Maupin <Chase.Maupin@ti.com>
-Date: Thu, 17 May 2012 09:51:50 -0500
-Subject: [PATCH] omap3_beagle: add usbethaddr setting to enable networking
-
-* In order for the SMSC USB ethernet device to work the
-  usbethaddr setting must be set when the "usb start" command
-  is executed and the network device is discovered.
-* Currently set this for de:ad:be:ef until we can start
-  generating random or semi-random MAC addresses.
-* Based on work by Steve Kipisz and Joel Fernandez
-
-Upstream-Status: Not Upstreamable
-    * We cannot upstream this hard coded MAC address setting.
-    * User's should look at the following web page for information on
-      how to generate a MAC address, but this patch enables the out
-      of box experience for the SDK.
-        http://www.denx.de/wiki/view/DULG/WhereCanIGetAValidMACAddress
-
-
-Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
----
- include/configs/omap3_beagle.h |    1 +
- 1 files changed, 1 insertions(+), 0 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index ddeb414..58a29b8 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -219,6 +219,7 @@
- 	"loadaddr=0x80200000\0" \
- 	"rdaddr=0x81000000\0" \
- 	"usbtty=cdc_acm\0" \
-+	"usbethaddr=de:ad:be:ef\0" \
- 	"bootfile=uImage.beagle\0" \
- 	"console=ttyO2,115200n8\0" \
- 	"mpurate=auto\0" \
--- 
-1.7.0.4
-

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0001-omap3_evm-Added-function-calls-to-set-volts-speed-on.patch

@@ -1,146 +0,0 @@
-From eff8924b57d21eadfe749e500617340b1a730c17 Mon Sep 17 00:00:00 2001
-From: Schuyler Patton <spatton@ti.com>
-Date: Thu, 30 Jun 2011 13:39:25 -0500
-Subject: [PATCH 1/3] omap3_evm: Added function calls to set volts, speed on OMAP36xx parts
-
-* evm.c
-
-*  Added setup calls to set voltage and speed
-
-*  Added calls in misc_init_r to twl4030_power_mpu_init and set_mpu_clock
-   functions. These set VDD1 to 1.35v and mpu clock to 1GHz respectively.
-   There is a check performed to make sure that this is only called on
-   omap36xx class parts.
-
-* twl4030.c
-
-* Added twl4030_power_mpu_init function to set VDD1 to 1.35 Volts
-
-* This is done to allow omap36xx parts to run at 1GHz.
-
-* clock.c
-
-* Added set_mpu_clk function to allow u-boot to set the clock
-  rate.
-
-* sys_proto.h
-
-* Added the function prototype set_mpu_clock
-
-* twl4030.h
-
-* Added twl4030_power_mpu_init function prototype
-
-Upstream-Status: Pending
-
-Signed-off-by: Schuyler Patton <spatton@ti.com>
----
- arch/arm/cpu/armv7/omap3/clock.c            |   15 +++++++++++++++
- arch/arm/include/asm/arch-omap3/sys_proto.h |    2 ++
- board/ti/evm/evm.c                          |    5 +++++
- drivers/power/twl4030.c                     |   12 ++++++++++++
- include/twl4030.h                           |    3 +++
- 5 files changed, 37 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
-index 567817e..46a28a3 100644
---- a/arch/arm/cpu/armv7/omap3/clock.c
-+++ b/arch/arm/cpu/armv7/omap3/clock.c
-@@ -35,6 +35,21 @@
- #include <command.h>
- 
- /******************************************************************************
-+ * Setting the Clock speed 
-+ *
-+ *****************************************************************************/
-+void set_mpu_clk(int speed)
-+{
-+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
-+
-+
-+	/* Set M */
-+	sr32(&prcm_base->clksel1_pll_mpu, 8, 11, speed);
-+	/* lock mode */
-+	sr32(&prcm_base->clken_pll_mpu, 0, 3, PLL_LOCK);
-+}
-+
-+/******************************************************************************
-  * get_sys_clk_speed() - determine reference oscillator speed
-  *                       based on known 32kHz clock and gptimer.
-  *****************************************************************************/
-diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h
-index 2a89e56..9db13d7 100644
---- a/arch/arm/include/asm/arch-omap3/sys_proto.h
-+++ b/arch/arm/include/asm/arch-omap3/sys_proto.h
-@@ -36,6 +36,8 @@ void prcm_init(void);
- void per_clocks_enable(void);
- void ehci_clocks_enable(void);
- 
-+void set_mpu_clk(int speed);
-+
- void memif_init(void);
- void sdrc_init(void);
- void do_sdrc_init(u32, u32);
-diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
-index 8497aee..91eb93d 100644
---- a/board/ti/evm/evm.c
-+++ b/board/ti/evm/evm.c
-@@ -39,6 +39,7 @@
- #include <asm/mach-types.h>
- #include <linux/mtd/nand.h>
- #include "evm.h"
-+#include <twl4030.h>
- 
- #define OMAP3EVM_GPIO_ETH_RST_GEN1		64
- #define OMAP3EVM_GPIO_ETH_RST_GEN2		7
-@@ -177,6 +178,10 @@ int misc_init_r(void)
- #endif
- 	dieid_num_r();
- 
-+        if (get_cpu_family() == CPU_OMAP36XX) {
-+   		twl4030_power_mpu_init();
-+	        set_mpu_clk(500);
-+	}
- 	return 0;
- }
- 
-diff --git a/drivers/power/twl4030.c b/drivers/power/twl4030.c
-index 36b2144..670b4cb 100644
---- a/drivers/power/twl4030.c
-+++ b/drivers/power/twl4030.c
-@@ -105,6 +105,18 @@ void twl4030_power_init(void)
- 				TWL4030_PM_RECEIVER_DEV_GRP_P1);
- }
- 
-+#define VDD1_VSEL_135	0x3C
-+
-+void twl4030_power_mpu_init(void)
-+{
-+        unsigned char byte;
-+
-+        /* 1.4 Volts */
-+        byte = VDD1_VSEL_135;
-+        twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, byte,
-+                             TWL4030_PM_RECEIVER_VDD1_VSEL);
-+}
-+
- void twl4030_power_mmc_init(void)
- {
- 	/* Set VMMC1 to 3.15 Volts */
-diff --git a/include/twl4030.h b/include/twl4030.h
-index 9cd32ab..91d36b8 100644
---- a/include/twl4030.h
-+++ b/include/twl4030.h
-@@ -510,6 +510,9 @@ static inline int twl4030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg)
-  * Power
-  */
- 
-+/*For setting VDD1  */
-+void twl4030_power_mpu_init(void);
-+
- /* For hardware resetting */
- void twl4030_power_reset_init(void);
- /* For setting device group and voltage */
--- 
-1.7.0.4
-

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0002-am335x-am3517evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch

@@ -1,73 +0,0 @@
-From 883551659d9b15dfb1ed7ad8ae4b34bfd1fa0fd9 Mon Sep 17 00:00:00 2001
-From: Tom Rini <trini@ti.com>
-Date: Wed, 16 Nov 2011 14:50:49 -0700
-Subject: [PATCH 2/4] am335x/am3517evm/beagleboard/am37x: Add CONFIG_CMD_ASKENV
-
-This is TI Sitara SDK specific (unified user experience, askenv command).
-
-Upstream-Status: Pending
-    * This will be submitted upstream by Tom Rini
-
-Signed-off-by: Tom Rini <trini@ti.com>
----
- include/configs/am335x_evm.h   |    2 ++
- include/configs/am3517_evm.h   |    2 ++
- include/configs/omap3_beagle.h |    2 ++
- include/configs/omap3_evm.h    |    2 ++
- 4 files changed, 8 insertions(+), 0 deletions(-)
-
-diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
-index d0fbc88..5cd7d6d 100644
---- a/include/configs/am335x_evm.h
-+++ b/include/configs/am335x_evm.h
-@@ -26,6 +26,8 @@
- #include <asm/arch/cpu.h>
- #include <asm/arch/hardware.h>
- 
-+#define CONFIG_CMD_ASKENV
-+
- #define CONFIG_ENV_SIZE			0x400
- #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (8 * 1024))
- #define CONFIG_SYS_PROMPT		"U-Boot# "
-diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
-index b5f75d1..2b3fce7 100644
---- a/include/configs/am3517_evm.h
-+++ b/include/configs/am3517_evm.h
-@@ -137,6 +137,8 @@
- /* commands to include */
- #include <config_cmd_default.h>
- 
-+#define CONFIG_CMD_ASKENV
-+
- #define CONFIG_CMD_EXT2		/* EXT2 Support			*/
- #define CONFIG_CMD_FAT		/* FAT support			*/
- #define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index ba73aa6..b270598 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -146,6 +146,8 @@
- /* commands to include */
- #include <config_cmd_default.h>
- 
-+#define CONFIG_CMD_ASKENV
-+
- #define CONFIG_CMD_CACHE
- #define CONFIG_CMD_EXT2		/* EXT2 Support			*/
- #define CONFIG_CMD_FAT		/* FAT support			*/
-diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
-index 1fcb7af..215d67d 100644
---- a/include/configs/omap3_evm.h
-+++ b/include/configs/omap3_evm.h
-@@ -42,6 +42,8 @@
-  */
- #include <config_cmd_default.h>
- 
-+#define CONFIG_CMD_ASKENV
-+
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_FAT
- #define CONFIG_CMD_JFFS2
--- 
-1.7.0.4
-

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0002-omap3evm-Make-the-board-start-at-800MHz.patch

@@ -1,36 +0,0 @@
-From a0f4f7b85d004db36a24cc05e9c34f137186270b Mon Sep 17 00:00:00 2001
-From: Chase Maupin <Chase.Maupin@ti.com>
-Date: Wed, 23 May 2012 09:25:06 -0500
-Subject: [PATCH 2/3] omap3evm: Make the board start at 800MHz
-
-* It is safe to start the the 3630 silicon at 800MHz for all
-  revisions.  Go ahead and bump the speed to 800MHz during boot
-  instead of using the default 500MHz speed.
-* This patch was based on work by Tom Rini <trini@ti.com> at
-  http://arago-project.org/git/projects/?p=u-boot-am33x.git;a=commit;h=ad130035df754931f2939902e453cc3736412f5f
-
-Upstream-Status: Pending
-    * Will be submitted upstream since it is safe for all silicon
-      revisions to boot at 800MHz according to HW team.
-
-Signed-off-by: Chase Maupin <Chase.Maupin@ti.com>
----
- board/ti/evm/evm.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
-index 91eb93d..0d0b4a2 100644
---- a/board/ti/evm/evm.c
-+++ b/board/ti/evm/evm.c
-@@ -180,7 +180,7 @@ int misc_init_r(void)
- 
-         if (get_cpu_family() == CPU_OMAP36XX) {
-    		twl4030_power_mpu_init();
--	        set_mpu_clk(500);
-+	        set_mpu_clk(800);
- 	}
- 	return 0;
- }
--- 
-1.7.0.4
-

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0003-beagleboard-Load-uImage-from-VFAT-by-default.patch

@@ -1,34 +0,0 @@
-From f2a15cd9e96648e05cb39159ba74cbfbfc8ff999 Mon Sep 17 00:00:00 2001
-From: Tom Rini <trini@ti.com>
-Date: Thu, 17 Nov 2011 08:41:42 -0700
-Subject: [PATCH 3/4] beagleboard: Load uImage from VFAT by default.
-
-This is TI Sitara SDK specific (unified user experience, load uImage
-from vfat).
-
-Upstream-Status: Not Appropriate
-    * This patch is to make the u-boot for beagleboard consistent
-      with other versions used in the AMSDK and doesn't make
-      sense up stream.
-
-Signed-off-by: Tom Rini <trini@ti.com>
----
- include/configs/omap3_beagle.h |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index b270598..ea62580 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -305,7 +305,7 @@
- 			"echo Running uenvcmd ...;" \
- 			"run uenvcmd;" \
- 		"fi;" \
--		"if run loaduimage; then " \
-+		"if run loaduimagefat; then " \
- 			"run mmcboot;" \
- 		"fi;" \
- 	"fi;" \
--- 
-1.7.0.4
-

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0003-beagleboard-Make-xM-rev-C-go-to-800MHz.patch

@@ -1,34 +0,0 @@
-From 372d110126f37f9f8b7d4bbedd3f02cf80e587de Mon Sep 17 00:00:00 2001
-From: Tom Rini <trini@ti.com>
-Date: Wed, 30 Nov 2011 16:16:21 -0700
-Subject: [PATCH 3/3] beagleboard: Make xM rev C go to 800MHz
-
-* This is the highest frequency supported on xM without BIAS
-  drivers.
-
-Upstream-Status: Pending
-    * Will be submitted upstream since it is safe for all silicon
-      revisions to boot at 800MHz according to HW team.
-
-Signed-off-by: Tom Rini <trini@ti.com>
----
- board/ti/beagle/beagle.c |    3 +++
- 1 files changed, 3 insertions(+), 0 deletions(-)
-
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index e26b387..69a7b4e 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -346,6 +346,9 @@ int misc_init_r(void)
- 					TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
- 					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
- 					TWL4030_PM_RECEIVER_DEV_GRP_P1);
-+		/* 800MHz support */
-+		twl4030_power_mpu_init();
-+		set_mpu_clk(800);
- 		break;
- 	default:
- 		printf("Beagle unknown 0x%02x\n", get_board_revision());
--- 
-1.7.0.4
-

recipes-bsp/u-boot/u-boot-am37x-2012.04.01/0004-beagleboard-Load-uImage-to-the-default-kernel-linux-.patch

@@ -1,57 +0,0 @@
-From 715afb049d2675106e26c5225e7e321374c32f85 Mon Sep 17 00:00:00 2001
-From: Tom Rini <trini@ti.com>
-Date: Thu, 17 Nov 2011 16:54:01 -0700
-Subject: [PATCH 4/4] beagleboard: Load uImage to the default kernel linux address
-
-This is TI Sitara SDK specific (unified user experience, load uImage
-to an 'XIP' location).
-
-Upstream-Status: Pending
-    * This functionality is being discussed upstream and there
-      is not a concensus yet.
-
-Signed-off-by: Tom Rini <trini@ti.com>
----
- include/configs/omap3_beagle.h |   13 +++++++------
- 1 files changed, 7 insertions(+), 6 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index ea62580..00b2abe 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -219,6 +219,7 @@
- 
- #define CONFIG_EXTRA_ENV_SETTINGS \
- 	"loadaddr=0x80200000\0" \
-+	"kloadaddr=0x80007fc0\0" \
- 	"rdaddr=0x81000000\0" \
- 	"usbtty=cdc_acm\0" \
- 	"usbethaddr=de:ad:be:ef\0" \
-@@ -272,18 +273,18 @@
- 		"root=${ramroot} " \
- 		"rootfstype=${ramrootfstype}\0" \
- 	"loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
--	"loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
--	"loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} /boot/uImage\0" \
-+	"loaduimagefat=fatload mmc ${mmcdev} ${kloadaddr} uImage\0" \
-+	"loaduimage=ext2load mmc ${mmcdev}:2 ${kloadaddr} /boot/uImage\0" \
- 	"mmcboot=echo Booting from mmc ...; " \
- 		"run mmcargs; " \
--		"bootm ${loadaddr}\0" \
-+		"bootm ${kloadaddr}\0" \
- 	"nandboot=echo Booting from nand ...; " \
- 		"run nandargs; " \
--		"nand read ${loadaddr} 280000 400000; " \
--		"bootm ${loadaddr}\0" \
-+		"nand read ${kloadaddr} 280000 400000; " \
-+		"bootm ${kloadaddr}\0" \
- 	"ramboot=echo Booting from ramdisk ...; " \
- 		"run ramargs; " \
--		"bootm ${loadaddr}\0" \
-+		"bootm ${kloadaddr}\0" \
- 	"userbutton=if gpio input 173; then run userbutton_xm; " \
- 		"else run userbutton_nonxm; fi;\0" \
- 	"userbutton_xm=gpio input 4;\0" \
--- 
-1.7.0.4
-

recipes-bsp/u-boot/u-boot-am37x_2012.04.01.bb

@@ -1,41 +0,0 @@
-require u-boot-ti.inc
-
-DESCRIPTION = "u-boot bootloader for ARM MPU devices"
-
-COMPATIBLE_MACHINE = "am37x-evm|beagleboard"
-
-BRANCH ?= "master"
-
-PR = "r1+gitr${SRCPV}"
-
-# v2012.04.01
-SRCREV = "415d386877df49eb051b85ef74fa59a16dc17c7d"
-
-SRC_URI = "git://git.denx.de/u-boot.git;protocol=git;branch=${BRANCH}"
-
-# Add patches for the AMSDK
-#  - 0001-omap3-beagle-add-usbethaddr....Not for Upstream
-#  - 0001-OMAP3-Beagle-Set-BOOTDELAY....Pending Upstream
-#  - 0002-am335x-am3517evm-beagleboard....Pending Upstream
-#  - 0003-beagleboard-Load-uImage-from....Not for Upstream
-#  - 0004-beagleboard-Load-uImage-to....Pending Upstream
-#  - 0001-omap3_evm-Added-function....Pending Upstream
-#  - 0002-omap3evm-Make-the-board....Pending Upstream
-#  - 0003-beagleboard-Make-xM-rev....Pending Upstream
-#  - 0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch....Upstreamed
-
-# Add a patch to set a default usbethaddr address to enable the out of box
-# experience.
-SRC_URI += "file://0001-omap3_beagle-add-usbethaddr-setting-to-enable-networ.patch \
-            file://0001-OMAP3-Beagle-Set-BOOTDELAY-to-3.patch \
-            file://0002-am335x-am3517evm-beagleboard-am37x-Add-CONFIG_CMD_AS.patch \
-            file://0003-beagleboard-Load-uImage-from-VFAT-by-default.patch \
-            file://0004-beagleboard-Load-uImage-to-the-default-kernel-linux-.patch \
-            file://0001-omap3_evm-Added-function-calls-to-set-volts-speed-on.patch \
-            file://0002-omap3evm-Make-the-board-start-at-800MHz.patch \
-            file://0003-beagleboard-Make-xM-rev-C-go-to-800MHz.patch \
-            file://0001-ARM-omap3-Set-SPL-stack-size-to-8KB-image-to-54KB.patch \
-            file://0001-armv7-Unaligned-access-fix.patch \
-            "
-
-SPL_BINARY = "MLO"

recipes-bsp/u-boot/u-boot-beagleboard_2011.09.bb

@@ -1,36 +0,0 @@
-require u-boot-ti.inc
-
-PR = "r7"
-
-SPL_BINARY = "MLO"
-
-# No patches for other machines yet
-COMPATIBLE_MACHINE = "(beagleboard)"
-
-SRC_URI = "git://git.denx.de/u-boot.git;protocol=git \
-           file://2011.09/0001-omap3-mem-Comment-enable_gpmc_cs_config-more.patch \
-           file://2011.09/0002-OMAP3-Update-SDRC-dram_init-to-always-call-make_cs1_.patch \
-           file://2011.09/0003-OMAP3-Add-a-helper-function-to-set-timings-in-SDRC.patch \
-           file://2011.09/0004-OMAP3-Change-mem_ok-to-clear-again-after-reading-bac.patch \
-           file://2011.09/0005-OMAP3-Remove-get_mem_type-prototype.patch \
-           file://2011.09/0006-omap3-mem-Add-MCFG-helper-macro.patch \
-           file://2011.09/0007-OMAP3-Add-optimal-SDRC-autorefresh-control-values.patch \
-           file://2011.09/0008-OMAP3-Suffix-all-Micron-memory-timing-parts-with-the.patch \
-           file://2011.09/0009-OMAP3-SPL-Rework-memory-initalization-and-devkit8000.patch \
-           file://2011.09/0010-OMAP3-SPL-Add-identify_nand_chip-function.patch \
-           file://2011.09/0011-OMAP3-Add-SPL-support-to-Beagleboard.patch \
-           file://2011.09/0012-OMAP3-Add-SPL-support-to-omap3_evm.patch \
-           file://2011.09/0013-AM3517-Add-SPL-support.patch \
-           file://2011.09/0014-AM3517-CraneBoard-Add-SPL-support.patch \
-           file://2011.09/0015-HACK-beagleboard-config-disable-cache-for-USB.patch \
-           file://2011.09/0016-beagleboard-config-enable-gpio-command.patch \
-           file://2011.09/0017-Increased-some-timeout-durations-for-MMC-and-EHCI.patch \
-           file://2011.09/0018-beagleboard-mount-rootfs-RO-instead-of-RW-at-boot.patch \
-           file://2011.09/0019-BeagleBoard-config-Really-switch-to-ttyO2.patch \
-           file://2011.09/0020-beagleboard-add-support-for-TCT-Beacon-board.patch \
-           file://2011.09/0021-beagleboard-add-support-for-scanning-loop-through-ex.patch \
-           file://0001-config-Always-use-GNU-ld.patch \
-           file://fw_env.config \
-          "
-
-SRCREV = "fdbe8b9a2d1858ba35dd6214315563ad44d4a0e3"

recipes-bsp/u-boot/u-boot-keystone_2013.01.bb

@@ -4,13 +4,67 @@ DESCRIPTION = "u-boot bootloader for Multi-Core BU devices"
 
 COMPATIBLE_MACHINE = "keystone"
 
-PR = "r2+gitr${SRCPV}"
-
-SRC_URI = "git://arago-project.org/git/projects/u-boot-keystone.git;protocol=git;branch=${BRANCH}"
+PR = "r5+gitr${SRCPV}"
 
+# Tag "K2_UBOOT_2013_01_14.09"
+SRCREV = "f9bc365551ff8c685bf6134d795576713fec0917"
 BRANCH = "master"
 
-# DEV.MCSDK-03.00.00.07
-SRCREV = "82f40e857d853165310d0753e79235aefb65d7ba"
+SRC_URI = "git://git.ti.com/keystone-linux/u-boot.git;protocol=git;branch=${BRANCH}"
+
+S = "${WORKDIR}/git"
 
 UBOOT_SUFFIX = "bin"
+UBOOT_MAKE_TARGET = "u-boot-spi.gph u-boot-nand.gph"
+
+# SPI NOR Flash binaries
+UBOOT_SPI_SPL_BINARY = "u-boot-spl.bin"
+UBOOT_SPI_BINARY = "u-boot.img"
+UBOOT_SPI_GPH_BINARY = "u-boot-spi.gph"
+UBOOT_NAND_GPH_BINARY = "u-boot-nand.gph"
+
+# SPI NOR Flash deployed images
+UBOOT_SPI_SPL_IMAGE = "u-boot-spl-${MACHINE}-${PV}-${PR}.bin"
+UBOOT_SPI_SPL_SYMLINK = "u-boot-spl-${MACHINE}.bin"
+UBOOT_SPI_IMAGE = "u-boot-${MACHINE}-${PV}-${PR}.img"
+UBOOT_SPI_SYMLINK = "u-boot-${MACHINE}.img"
+UBOOT_SPI_GPH_IMAGE = "u-boot-spi-${MACHINE}-${PV}-${PR}.gph"
+UBOOT_SPI_GPH_SYMLINK = "u-boot-spi-${MACHINE}.gph"
+UBOOT_NAND_GPH_IMAGE = "u-boot-nand-${MACHINE}-${PV}-${PR}.gph"
+UBOOT_NAND_GPH_SYMLINK = "u-boot-nand-${MACHINE}.gph"
+
+do_install_append () {
+	install ${S}/spl/${UBOOT_SPI_SPL_BINARY} ${D}/boot/${UBOOT_SPI_SPL_IMAGE}
+	ln -sf ${UBOOT_SPI_SPL_IMAGE} ${D}/boot/${UBOOT_SPI_SPL_BINARY}
+
+	install ${S}/${UBOOT_SPI_BINARY} ${D}/boot/${UBOOT_SPI_IMAGE}
+	ln -sf ${UBOOT_SPI_IMAGE} ${D}/boot/${UBOOT_SPI_BINARY}
+
+	install ${S}/${UBOOT_SPI_GPH_BINARY} ${D}/boot/${UBOOT_SPI_GPH_IMAGE}
+	ln -sf ${UBOOT_SPI_GPH_IMAGE} ${D}/boot/${UBOOT_SPI_GPH_BINARY}
+
+        install ${S}/${UBOOT_NAND_GPH_BINARY} ${D}/boot/${UBOOT_NAND_GPH_IMAGE}
+        ln -sf ${UBOOT_NAND_GPH_IMAGE} ${D}/boot/${UBOOT_NAND_GPH_BINARY}
+}
+
+do_deploy_append () {
+	install ${S}/spl/${UBOOT_SPI_SPL_BINARY} ${DEPLOYDIR}/${UBOOT_SPI_SPL_IMAGE}
+	rm -f ${UBOOT_SPI_SPL_BINARY} ${UBOOT_SPI_SPL_SYMLINK}
+	ln -sf ${UBOOT_SPI_SPL_IMAGE} ${UBOOT_SPI_SPL_SYMLINK}
+	ln -sf ${UBOOT_SPI_SPL_IMAGE} ${UBOOT_SPI_SPL_BINARY}
+
+	install ${S}/${UBOOT_SPI_BINARY} ${DEPLOYDIR}/${UBOOT_SPI_IMAGE}
+	rm -f ${UBOOT_SPI_BINARY} ${UBOOT_SPI_SYMLINK}
+	ln -sf ${UBOOT_SPI_IMAGE} ${UBOOT_SPI_SYMLINK}
+	ln -sf ${UBOOT_SPI_IMAGE} ${UBOOT_SPI_BINARY}
+
+	install ${S}/${UBOOT_SPI_GPH_BINARY} ${DEPLOYDIR}/${UBOOT_SPI_GPH_IMAGE}
+	rm -f ${UBOOT_SPI_GPH_BINARY} ${UBOOT_SPI_GPH_SYMLINK}
+	ln -sf ${UBOOT_SPI_GPH_IMAGE} ${UBOOT_SPI_GPH_SYMLINK}
+	ln -sf ${UBOOT_SPI_GPH_IMAGE} ${UBOOT_SPI_GPH_BINARY}
+
+        install ${S}/${UBOOT_NAND_GPH_BINARY} ${DEPLOYDIR}/${UBOOT_NAND_GPH_IMAGE}
+        rm -f ${UBOOT_NAND_GPH_BINARY} ${UBOOT_NAND_GPH_SYMLINK}
+        ln -sf ${UBOOT_NAND_GPH_IMAGE} ${UBOOT_NAND_GPH_SYMLINK}
+        ln -sf ${UBOOT_NAND_GPH_IMAGE} ${UBOOT_NAND_GPH_BINARY}
+}

recipes-bsp/u-boot/u-boot-ti-staging_2013.10.bb

@@ -5,14 +5,14 @@ DESCRIPTION = "u-boot bootloader for TI devices"
 LIC_FILES_CHKSUM = "file://Licenses/README;md5=025bf9f768cbcb1a165dbe1a110babfb"
 
 PV = "2013.10"
-PR = "r7+gitr${SRCPV}"
+PR = "r8+gitr${SRCPV}"
 
 SRC_URI = "git://git.ti.com/ti-u-boot/ti-u-boot.git;protocol=git;branch=${BRANCH}"
 
 BRANCH ?= "ti-u-boot-2013.10"
 
-# Corresponds to tag ti2013.12.01
-SRCREV = "78d8ebd4a0214b72a125f5b98c5ed2f9a3e5e783"
+# Corresponds to tag ti2013.12.01_amsdk-07.01
+SRCREV = "259ff9a577cc66cb40e3cdff3e41628e466f0fef"
 
 SPL_BINARY = "MLO"
 SPL_UART_BINARY = "u-boot-spl.bin"

recipes-bsp/u-boot/u-boot-ti-staging_2014.07.bb

@@ -0,0 +1,20 @@
+require u-boot-ti.inc
+
+# u-boot needs devtree compiler to parse dts files
+DEPENDS += "dtc-native"
+
+DESCRIPTION = "u-boot bootloader for TI devices"
+
+LIC_FILES_CHKSUM = "file://Licenses/README;md5=025bf9f768cbcb1a165dbe1a110babfb"
+
+PV = "2014.07"
+PR = "r6+gitr${SRCPV}"
+
+SRC_URI = "git://git.ti.com/ti-u-boot/ti-u-boot.git;protocol=git;branch=${BRANCH}"
+
+BRANCH ?= "ti-u-boot-2014.07"
+
+SRCREV = "705aec706adf37b63fd4b09660c638150e606fdb"
+
+SPL_BINARY = "MLO"
+SPL_UART_BINARY = "u-boot-spl.bin"

recipes-bsp/u-boot/u-boot-ti.inc

@@ -1,3 +1,5 @@
+UBOOT_SUFFIX ?= "img"
+
 require ${COREBASE}/meta/recipes-bsp/u-boot/u-boot.inc
 
 FILESEXTRAPATHS_prepend := "${THISDIR}/u-boot:"
@@ -14,8 +16,6 @@ PKG_${PN}-dbg = "u-boot-dbg"
 
 S = "${WORKDIR}/git"
 
-UBOOT_SUFFIX = "img"
-
 # SPL (Second Program Loader) to be loaded over UART
 SPL_UART_BINARY ?= ""
 SPL_UART_IMAGE ?= "${SPL_UART_BINARY}-${MACHINE}-${PV}-${PR}"

recipes-bsp/u-boot/u-boot/0001-OMAP3-Beagle-Pin-Mux-initialization-glitch-fix.patch

@@ -1,46 +0,0 @@
-From 7b250f8be3b8c496796dcdc954c9e5959cefea2c Mon Sep 17 00:00:00 2001
-From: Bob Feretich <bob.feretich@rafresearch.com>
-Date: Thu, 24 Feb 2011 13:16:44 +0000
-Subject: [PATCH 01/16] OMAP3 Beagle Pin Mux initialization glitch fix
-
-The below patch reverses the order of two segments in the board file.
-Output pins need to have their values initialized, before they are
-exposed to the logic outside the chip.
-
-Signed-off-by: Bob Feretich <bob.feretich@rafresearch.com>
-Cc: Wolfgang Denk <wd@denx.de>
----
- board/ti/beagle/beagle.c |   12 ++++++------
- 1 files changed, 6 insertions(+), 6 deletions(-)
-
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index c066d6e..929461c 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -239,17 +239,17 @@ int misc_init_r(void)
- 	twl4030_power_init();
- 	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
- 
--	/* Configure GPIOs to output */
--	writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
--	writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
--		GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
--
--	/* Set GPIOs */
-+	/* Set GPIO states before they are made outputs */
- 	writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1,
- 		&gpio6_base->setdataout);
- 	writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
- 		GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
- 
-+	/* Configure GPIOs to output */
-+	writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
-+	writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
-+		GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
-+
- 	dieid_num_r();
- 
- 	return 0;
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/0001-armv7-Unaligned-access-fix.patch

@@ -1,30 +0,0 @@
-From 40f1e7db785f477a2aa145a3b47bd498c48ad52d Mon Sep 17 00:00:00 2001
-From: Steve Kipisz <s-kipisz2@ti.com>
-Date: Fri, 14 Jun 2013 05:16:52 -0500
-Subject: [PATCH] armv7:Unaligned access fix
-
-This fixes an unaligned access data abort introduced when using gcc 4.7
-or higher. The Linaro toolchain uses gcc 4.7.3. This is documented in u-boot
-doc/README.arm-unaligned-accesses.
-
-Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
----
- arch/arm/cpu/armv7/config.mk |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/cpu/armv7/config.mk b/arch/arm/cpu/armv7/config.mk
-index 9c3e2f3..9736da8 100644
---- a/arch/arm/cpu/armv7/config.mk
-+++ b/arch/arm/cpu/armv7/config.mk
-@@ -20,7 +20,7 @@
- # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- # MA 02111-1307 USA
- #
--PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float
-+PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float -mno-unaligned-access
- 
- # If armv7-a is not supported by GCC fall-back to armv5, which is
- # supported by more tool-chains
--- 
-1.7.9.5
-

recipes-bsp/u-boot/u-boot/0001-config-Always-use-GNU-ld.patch

@@ -1,43 +0,0 @@
-From a8dc33253472328f2af04973575f26e9106db1c3 Mon Sep 17 00:00:00 2001
-From: Khem Raj <raj.khem@gmail.com>
-Date: Wed, 21 Dec 2011 08:53:02 -0800
-Subject: [PATCH] config: Always use GNU ld
-
-This patch makes sure that we always use the GNU ld. u-boot uses certain
-construct e.g. OVERLAY which are not implemented in gold therefore it
-always needs GNU ld for linking. It works well if default linker in
-toolchain is GNU ld but in some cases we can have gold to be the
-default linker and also ship GNU ld but not as default in such cases
-its called $(PREFIX)ld.bfd, with this patch we make sure that if
-$(PREFIX)ld.bfd exists than we use that for our ld. This way it
-does not matter what the default ld is.
-
-Upstream-status: Pending
-
-Signed-off-by: Khem Raj <raj.khem@gmail.com>
----
- config.mk |    4 +++-
- 1 files changed, 3 insertions(+), 1 deletions(-)
-
-diff --git a/config.mk b/config.mk
-index ddaa477..139dfa0 100644
---- a/config.mk
-+++ b/config.mk
-@@ -126,11 +126,13 @@ cc-option = $(strip $(if $(findstring $1,$(CC_OPTIONS)),$1,\
- 		$(if $(call cc-option-sys,$1),$1,$2)))
- endif
- 
-+exists_bfd_ld = $(shell if $(CROSS_COMPILE)ld.bfd -v > /dev/null 2>&1; \
-+		then echo "$(1)"; else echo "$(2)"; fi; )
- #
- # Include the make variables (CC, etc...)
- #
- AS	= $(CROSS_COMPILE)as
--LD	= $(CROSS_COMPILE)ld
-+LD	= $(call exists_bfd_ld, "$(CROSS_COMPILE)ld.bfd", "$(CROSS_COMPILE)ld")
- CC	= $(CROSS_COMPILE)gcc
- CPP	= $(CC) -E
- AR	= $(CROSS_COMPILE)ar
--- 
-1.7.9.1
-

recipes-bsp/u-boot/u-boot/0001-omap3evm-Change-default-console-serial-port-from.patch

@@ -1,30 +0,0 @@
-From 6b23ecf49d1c2ee5227ff57101919af46ecd7396 Mon Sep 17 00:00:00 2001
-From: Roger Monk <r-monk@ti.com>
-Date: Fri, 9 Jul 2010 08:37:04 +0100
-Subject: [PATCH] omap3evm:  Change default 'console' serial port from ttyS2 to ttyS0
-
-   * Update default kernel console env variable ($(console))
-     to use ttyS0 (instead of ttyS2) to match the serial port
-      used by x-loader and u-boot
-
-Signed-off-by: Roger Monk <r-monk@ti.com>
----
- include/configs/omap3_evm.h |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
-index 73a5c98..d01d733 100644
---- a/include/configs/omap3_evm.h
-+++ b/include/configs/omap3_evm.h
-@@ -203,7 +203,7 @@
- #define CONFIG_EXTRA_ENV_SETTINGS \
- 	"loadaddr=0x82000000\0" \
- 	"usbtty=cdc_acm\0" \
--	"console=ttyS2,115200n8\0" \
-+	"console=ttyS0,115200n8\0" \
- 	"mmcargs=setenv bootargs console=${console} " \
- 		"root=/dev/mmcblk0p2 rw " \
- 		"rootfstype=ext3 rootwait\0" \
--- 
-1.6.0.4
-

recipes-bsp/u-boot/u-boot/0002-OMAP-Remove-omapfb.debug-y-from-Beagle-and-Overo-env.patch

@@ -1,56 +0,0 @@
-From 0588da9057fddb5f6a6a04aedd7e0a79eb39e9e5 Mon Sep 17 00:00:00 2001
-From: Steve Sakoman <steve@sakoman.com>
-Date: Thu, 30 Dec 2010 07:19:44 +0000
-Subject: [PATCH 02/16] OMAP: Remove omapfb.debug=y from Beagle and Overo env settings
-
-The kernel DSS2 code is mature now, and keeping this setting hurts performance
-
-Signed-off-by: Steve Sakoman <steve@sakoman.com>
----
- include/configs/omap3_beagle.h |    2 --
- include/configs/omap3_overo.h  |    2 --
- 2 files changed, 0 insertions(+), 4 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 5cfa4cb..8b580ef 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -203,7 +203,6 @@
- 		"mpurate=${mpurate} " \
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
--		"omapfb.debug=y " \
- 		"omapdss.def_disp=${defaultdisplay} " \
- 		"root=${mmcroot} " \
- 		"rootfstype=${mmcrootfstype}\0" \
-@@ -211,7 +210,6 @@
- 		"mpurate=${mpurate} " \
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
--		"omapfb.debug=y " \
- 		"omapdss.def_disp=${defaultdisplay} " \
- 		"root=${nandroot} " \
- 		"rootfstype=${nandrootfstype}\0" \
-diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
-index 1b3d439..06a28f6 100644
---- a/include/configs/omap3_overo.h
-+++ b/include/configs/omap3_overo.h
-@@ -169,7 +169,6 @@
- 		"mpurate=${mpurate} " \
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
--		"omapfb.debug=y " \
- 		"omapdss.def_disp=${defaultdisplay} " \
- 		"root=${mmcroot} " \
- 		"rootfstype=${mmcrootfstype}\0" \
-@@ -177,7 +176,6 @@
- 		"mpurate=${mpurate} " \
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
--		"omapfb.debug=y " \
- 		"omapdss.def_disp=${defaultdisplay} " \
- 		"root=${nandroot} " \
- 		"rootfstype=${nandrootfstype}\0" \
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/0003-omap3_beagle-enable-the-use-of-a-plain-text-file-nam.patch

@@ -1,89 +0,0 @@
-From 58ca6009d4101e5fd45ef9df22aa360d1662e9e9 Mon Sep 17 00:00:00 2001
-From: Alexander Holler <holler@ahsoftware.de>
-Date: Mon, 24 Jan 2011 13:08:49 +0000
-Subject: [PATCH 03/16] omap3_beagle: enable the use of a plain text file named uEnv.txt instead of boot.scr
-
-Using the new env import command it is possible to use plain text files instead
-of script-images. Plain text files are much easier to handle.
-
-E.g. If your boot.scr contains the following:
------------------------------------
-setenv dvimode 1024x768-16@60
-run loaduimage
-run mmcboot
------------------------------------
-you could create a file named uEnv.txt and use that instead of boot.scr:
------------------------------------
-dvimode=1024x768-16@60
-uenvcmd=run loaduimage; run mmcboot
------------------------------------
-The variable uenvcmd (if existent) will be executed (using run) after uEnv.txt
-was loaded. If uenvcmd doesn't exist the default boot sequence will be started,
-therefore you could just use
------------------------------------
-dvimode=1024x768-16@60
------------------------------------
-as uEnv.txt because loaduimage and mmcboot is part of the default boot sequence.
----
-Changes for v2:
-  - Eliminated else redundant clause that would be ignored if boot
-    succeeds.
-
-Changes for v3:
-  - Removed boot.scr
-
-Changes for v4:
-  - Removed comment about boot.scr being supported.
----
- include/configs/omap3_beagle.h |   28 ++++++++++++++++------------
- 1 files changed, 16 insertions(+), 12 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 8b580ef..c85537c 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -213,9 +213,9 @@
- 		"omapdss.def_disp=${defaultdisplay} " \
- 		"root=${nandroot} " \
- 		"rootfstype=${nandrootfstype}\0" \
--	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
--	"bootscript=echo Running bootscript from mmc ...; " \
--		"source ${loadaddr}\0" \
-+	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
-+	"importbootenv=echo Importing environment from mmc ...; " \
-+		"env import -t $loadaddr $filesize\0" \
- 	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
- 	"mmcboot=echo Booting from mmc ...; " \
- 		"run mmcargs; " \
-@@ -227,15 +227,19 @@
- 
- #define CONFIG_BOOTCOMMAND \
- 	"if mmc rescan ${mmcdev}; then " \
--		"if run loadbootscript; then " \
--			"run bootscript; " \
--		"else " \
--			"if run loaduimage; then " \
--				"run mmcboot; " \
--			"else run nandboot; " \
--			"fi; " \
--		"fi; " \
--	"else run nandboot; fi"
-+		"echo SD/MMC found on device ${mmcdev};" \
-+		"if run loadbootenv; then " \
-+			"run importbootenv;" \
-+		"fi;" \
-+		"if test -n $uenvcmd; then " \
-+			"echo Running uenvcmd ...;" \
-+			"run uenvcmd;" \
-+		"fi;" \
-+		"if run loaduimage; then " \
-+			"run mmcboot;" \
-+		"fi;" \
-+	"fi;" \
-+	"run nandboot;" \
- 
- #define CONFIG_AUTO_COMPLETE		1
- /*
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/0004-OMAP3-BeagleBoard-Enable-pullups-on-i2c2.patch

@@ -1,69 +0,0 @@
-From 6859e4b88c405ed40c898d259227f158da5f867a Mon Sep 17 00:00:00 2001
-From: Steve Kipisz <s-kipisz2@ti.com>
-Date: Thu, 5 Aug 2010 10:36:07 -0500
-Subject: [PATCH 04/16] OMAP3: BeagleBoard: Enable pullups on i2c2.
-
-This allows the reading of EEPROMS on the expansion bus without adding
-external pull-ups.
----
-v2 updates
- * Updated per http://patchwork.ozlabs.org/patch/71997/
- * Added description
- * Used OMAP34XX_CTRL_BASE
- * Used structure and writel to perform write
-
-v3 updates
- * Included v3 in the subject line
- * Fixed structure name typo that got messed up in generating patch
- * Removed some extraneous blank lines
-
-v4 updates
- * Fixed typo in typecast
----
- arch/arm/include/asm/arch-omap3/omap3.h |   14 ++++++++++++++
- board/ti/beagle/beagle.c                |    4 ++++
- 2 files changed, 18 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h
-index 3957c79..cc2b541 100644
---- a/arch/arm/include/asm/arch-omap3/omap3.h
-+++ b/arch/arm/include/asm/arch-omap3/omap3.h
-@@ -50,6 +50,20 @@
- /* CONTROL */
- #define OMAP34XX_CTRL_BASE		(OMAP34XX_L4_IO_BASE + 0x2000)
- 
-+#ifndef __ASSEMBLY__
-+/* Signal Integrity Parameter Control Registers */
-+struct control_prog_io {
-+	unsigned char res[0x408];
-+	unsigned int io2;		/* 0x408 */
-+	unsigned char res2[0x38];
-+	unsigned int io0;		/* 0x444 */
-+	unsigned int io1;		/* 0x448 */
-+};
-+#endif /* __ASSEMBLY__ */
-+
-+/* Bit definition for CONTROL_PROG_IO1 */
-+#define PRG_I2C2_PULLUPRESX		0x00000001
-+
- /* UART */
- #define OMAP34XX_UART1			(OMAP34XX_L4_IO_BASE + 0x6a000)
- #define OMAP34XX_UART2			(OMAP34XX_L4_IO_BASE + 0x6c000)
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index 929461c..9d03b24 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -148,6 +148,10 @@ int misc_init_r(void)
- {
- 	struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
- 	struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
-+	struct control_prog_io *prog_io_base = (struct control_prog_io *)OMAP34XX_CTRL_BASE;
-+
-+	/* Enable i2c2 pullup resisters */
-+	writel(~(PRG_I2C2_PULLUPRESX), &prog_io_base->io1);
- 
- 	switch (get_board_revision()) {
- 	case REVISION_AXBX:
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/0005-ARMV7-OMAP3-BeagleBoard-add-xM-rev-B-to-ID-table.patch

@@ -1,111 +0,0 @@
-From d2d1669e4e2d4eeb996305278c6e4df0b1e04a8d Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Wed, 3 Nov 2010 14:48:31 +0100
-Subject: [PATCH 05/16] ARMV7: OMAP3: BeagleBoard: add xM rev B to ID table
-
-Patch was updated by Jason Kridner <jkridner@beagleboard.org>:
-* Use tabs to match style of other board revisions
-* Only include board revisions that exist
-* Default to the same configuration as the latest revision, but
-  without setting 'beaglerev'
----
-v2 Changes
-  * Updated with feedback from http://patchwork.ozlabs.org/patch/71995/
-  * Removed setting of mpurate based on board revision
-  * Set mpurate to auto in default environment variables
-
-Cc: Koen Kooi <koen@dominion.thruhere.net>
----
- board/ti/beagle/beagle.c       |   22 +++++++++++++++++-----
- board/ti/beagle/beagle.h       |    3 ++-
- include/configs/omap3_beagle.h |    2 +-
- 3 files changed, 20 insertions(+), 7 deletions(-)
-
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index 9d03b24..87a952e 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -157,18 +157,15 @@ int misc_init_r(void)
- 	case REVISION_AXBX:
- 		printf("Beagle Rev Ax/Bx\n");
- 		setenv("beaglerev", "AxBx");
--		setenv("mpurate", "600");
- 		break;
- 	case REVISION_CX:
- 		printf("Beagle Rev C1/C2/C3\n");
- 		setenv("beaglerev", "Cx");
--		setenv("mpurate", "600");
- 		MUX_BEAGLE_C();
- 		break;
- 	case REVISION_C4:
- 		printf("Beagle Rev C4\n");
- 		setenv("beaglerev", "C4");
--		setenv("mpurate", "720");
- 		MUX_BEAGLE_C();
- 		/* Set VAUX2 to 1.8V for EHCI PHY */
- 		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
-@@ -176,10 +173,19 @@ int misc_init_r(void)
- 					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
- 					TWL4030_PM_RECEIVER_DEV_GRP_P1);
- 		break;
--	case REVISION_XM:
-+	case REVISION_XM_A:
- 		printf("Beagle xM Rev A\n");
- 		setenv("beaglerev", "xMA");
--		setenv("mpurate", "1000");
-+		MUX_BEAGLE_XM();
-+		/* Set VAUX2 to 1.8V for EHCI PHY */
-+		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
-+					TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
-+					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
-+					TWL4030_PM_RECEIVER_DEV_GRP_P1);
-+		break;
-+	case REVISION_XM_B:
-+		printf("Beagle xM Rev B\n");
-+		setenv("beaglerev", "xMB");
- 		MUX_BEAGLE_XM();
- 		/* Set VAUX2 to 1.8V for EHCI PHY */
- 		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
-@@ -189,6 +195,12 @@ int misc_init_r(void)
- 		break;
- 	default:
- 		printf("Beagle unknown 0x%02x\n", get_board_revision());
-+		MUX_BEAGLE_XM();
-+		/* Set VAUX2 to 1.8V for EHCI PHY */
-+		twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
-+					TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
-+					TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
-+					TWL4030_PM_RECEIVER_DEV_GRP_P1);
- 	}
- 
- 	switch (get_expansion_id()) {
-diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
-index b22b653..b0e26e5 100644
---- a/board/ti/beagle/beagle.h
-+++ b/board/ti/beagle/beagle.h
-@@ -37,7 +37,8 @@ const omap3_sysinfo sysinfo = {
- #define REVISION_AXBX	0x7
- #define REVISION_CX	0x6
- #define REVISION_C4	0x5
--#define REVISION_XM	0x0
-+#define REVISION_XM_A	0x0
-+#define REVISION_XM_B	0x1
- 
- /*
-  * IEN  - Input Enable
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index c85537c..51e14d0 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -190,7 +190,7 @@
- 	"loadaddr=0x82000000\0" \
- 	"usbtty=cdc_acm\0" \
- 	"console=ttyS2,115200n8\0" \
--	"mpurate=500\0" \
-+	"mpurate=auto\0" \
- 	"vram=12M\0" \
- 	"dvimode=1024x768MR-16@60\0" \
- 	"defaultdisplay=dvi\0" \
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/0006-OMAP3-BeagleBoard-add-more-expansionboard-IDs.patch

@@ -1,95 +0,0 @@
-From 40cdd86d6040714f79e81bb813596748490aa948 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Wed, 3 Nov 2010 14:39:15 +0100
-Subject: [PATCH 06/16] OMAP3: BeagleBoard: add more expansionboard IDs
-
-Information on configurations pulled from
-http://www.elinux.org/BeagleBoardPinMux#Vendor_and_Device_IDs
-
-Boards added:
-* Added BeagleBoardToys WiFi, VGA and LCD boards
-* Added KBADC Beagle FPGA board
-* Added Brainmux LCDog and LCDog Touch
-* Added Liquidware BeagleTouch
----
-v2 updates
-  * Removed unused definitions
-  * Added BeagleBoardToys board configurations
-  * Made definition names consistent as VENDOR_BOARD
----
- board/ti/beagle/beagle.c |   30 +++++++++++++++++++++++++++++-
- board/ti/beagle/beagle.h |   12 ++++++++++++
- 2 files changed, 41 insertions(+), 1 deletions(-)
-
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index 87a952e..97e9e12 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -48,7 +48,12 @@
- #define TINCANTOOLS_TRAINER		0x04000100
- #define TINCANTOOLS_SHOWDOG		0x03000100
- #define KBADC_BEAGLEFPGA		0x01000600
--
-+#define LW_BEAGLETOUCH			0x01000700
-+#define BRAINMUX_LCDOG			0x01000800
-+#define BRAINMUX_LCDOGTOUCH		0x02000800
-+#define BBTOYS_WIFI			0x01000B00
-+#define BBTOYS_VGA			0x02000B00
-+#define BBTOYS_LCD			0x03000B00
- #define BEAGLE_NO_EEPROM		0xffffffff
- 
- DECLARE_GLOBAL_DATA_PTR;
-@@ -239,6 +244,29 @@ int misc_init_r(void)
- 		MUX_KBADC_BEAGLEFPGA();
- 		setenv("buddy", "beaglefpga");
- 		break;
-+	case LW_BEAGLETOUCH:
-+		printf("Recognized Liquidware BeagleTouch board\n");
-+		setenv("buddy", "beagletouch");
-+		break;
-+	case BRAINMUX_LCDOG:
-+		printf("Recognized Brainmux LCDog board\n");
-+		setenv("buddy", "lcdog");
-+		break;
-+	case BRAINMUX_LCDOGTOUCH:
-+		printf("Recognized Brainmux LCDog Touch board\n");
-+		setenv("buddy", "lcdogtouch");
-+		break;
-+	case BBTOYS_WIFI:
-+		printf("Recognized BeagleBoardToys WiFi board\n");
-+		MUX_BBTOYS_WIFI()
-+		setenv("buddy", "bbtoys-wifi");
-+		break;;
-+	case BBTOYS_VGA:
-+		printf("Recognized BeagleBoardToys VGA board\n");
-+		break;;
-+	case BBTOYS_LCD:
-+		printf("Recognized BeagleBoardToys LCD board\n");
-+		break;;
- 	case BEAGLE_NO_EEPROM:
- 		printf("No EEPROM on expansion board\n");
- 		setenv("buddy", "none");
-diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
-index b0e26e5..0f21790 100644
---- a/board/ti/beagle/beagle.h
-+++ b/board/ti/beagle/beagle.h
-@@ -458,4 +458,16 @@ const omap3_sysinfo sysinfo = {
- 	MUX_VAL(CP(MCBSP1_DR),      (IEN  | PTU | EN  | M1)) /*MCSPI4_SOMI*/\
- 	MUX_VAL(CP(MCBSP1_FSX),     (IDIS | PTU | DIS | M1)) /*MCSPI4_CS0*/
- 
-+#define MUX_BBTOYS_WIFI() \
-+	MUX_VAL(CP(MMC2_CLK),       (IEN  | PTU | EN  | M0)) /*MMC2_CLK*/\
-+	MUX_VAL(CP(MMC2_CMD),       (IEN  | PTU | EN  | M0)) /*MMC2_CMD*/\
-+	MUX_VAL(CP(MMC2_DAT0),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT0*/\
-+	MUX_VAL(CP(MMC2_DAT1),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT1*/\
-+	MUX_VAL(CP(MMC2_DAT2),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT2*/\
-+	MUX_VAL(CP(MMC2_DAT3),      (IEN  | PTU | EN  | M0)) /*MMC2_DAT3*/\
-+	MUX_VAL(CP(MMC2_DAT4),      (IDIS | PTU | EN  | M4)) /*GPIO_136 FM_EN/BT_WU*/\
-+	MUX_VAL(CP(MMC2_DAT5),      (IEN  | PTU | EN  | M4)) /*GPIO_137 WLAN_IRQ*/\
-+	MUX_VAL(CP(MMC2_DAT6),      (IDIS | PTU | EN  | M4)) /*GPIO_138 BT_EN*/\
-+	MUX_VAL(CP(MMC2_DAT7),      (IDIS | PTU | EN  | M4)) /*GPIO_139 WLAN_EN*/
-+
- #endif
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/0007-OMAP3-Add-DSS-driver-for-OMAP3.patch

@@ -1,435 +0,0 @@
-From 8a249fc1c57ab01a78996e33e74a71757a9448b1 Mon Sep 17 00:00:00 2001
-From: Syed Mohammed Khasim <khasim@ti.com>
-Date: Tue, 12 Jan 2010 23:57:28 +0530
-Subject: [PATCH 07/16] OMAP3: Add DSS driver for OMAP3
-
-Supports dynamic panel configuration
-Supports dynamic tv standard selection
-Adds support for DSS register access through generic APIs
-
-Incorporated DSS register access using structures.
-
-Previous discussions are here
-http://www.mail-archive.com/u-boot@lists.denx.de/msg27150.html
----
-v2 updates:
-  * Enable panel output for BeagleBoard
-  * BeagleBoard: Update DVI-D orange screen frequencies for xM
-
-Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
----
- arch/arm/include/asm/arch-omap3/dss.h |  173 +++++++++++++++++++++++++++++++++
- board/ti/beagle/beagle.c              |   22 ++++
- board/ti/beagle/beagle.h              |   26 +++++
- drivers/video/Makefile                |    2 +
- drivers/video/omap3_dss.c             |  130 +++++++++++++++++++++++++
- 5 files changed, 353 insertions(+), 0 deletions(-)
- create mode 100644 arch/arm/include/asm/arch-omap3/dss.h
- create mode 100644 drivers/video/omap3_dss.c
-
-diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h
-new file mode 100644
-index 0000000..e5e3b0d
---- /dev/null
-+++ b/arch/arm/include/asm/arch-omap3/dss.h
-@@ -0,0 +1,173 @@
-+/*
-+ * (C) Copyright 2010
-+ * Texas Instruments, <www.ti.com>
-+ * Syed Mohammed Khasim <khasim@ti.com>
-+ *
-+ * Referred to Linux DSS driver files for OMAP3
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation's version 2 of
-+ * the License.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef DSS_H
-+#define DSS_H
-+
-+/*
-+ * DSS Base Registers
-+ */
-+#define OMAP3_DSS_BASE		0x48050040
-+#define OMAP3_DISPC_BASE	0x48050440
-+#define OMAP3_VENC_BASE		0x48050C00
-+
-+/* DSS Registers */
-+struct dss_regs {
-+	u32 control;				/* 0x40 */
-+	u32 sdi_control;			/* 0x44 */
-+	u32 pll_control;			/* 0x48 */
-+};
-+
-+/* DISPC Registers */
-+struct dispc_regs {
-+	u32 control;				/* 0x40 */
-+	u32 config;				/* 0x44 */
-+	u32 reserve_2;				/* 0x48 */
-+	u32 default_color0;			/* 0x4C */
-+	u32 default_color1;			/* 0x50 */
-+	u32 trans_color0;			/* 0x54 */
-+	u32 trans_color1;			/* 0x58 */
-+	u32 line_status;			/* 0x5C */
-+	u32 line_number;			/* 0x60 */
-+	u32 timing_h;				/* 0x64 */
-+	u32 timing_v;				/* 0x68 */
-+	u32 pol_freq;				/* 0x6C */
-+	u32 divisor;				/* 0x70 */
-+	u32 global_alpha;			/* 0x74 */
-+	u32 size_dig;				/* 0x78 */
-+	u32 size_lcd;				/* 0x7C */
-+};
-+
-+/* VENC Registers */
-+struct venc_regs {
-+	u32 rev_id;				/* 0x00 */
-+	u32 status;				/* 0x04 */
-+	u32 f_control;				/* 0x08 */
-+	u32 reserve_1;				/* 0x0C */
-+	u32 vidout_ctrl;			/* 0x10 */
-+	u32 sync_ctrl;				/* 0x14 */
-+	u32 reserve_2;				/* 0x18 */
-+	u32 llen;				/* 0x1C */
-+	u32 flens;				/* 0x20 */
-+	u32 hfltr_ctrl;				/* 0x24 */
-+	u32 cc_carr_wss_carr;			/* 0x28 */
-+	u32 c_phase;				/* 0x2C */
-+	u32 gain_u;				/* 0x30 */
-+	u32 gain_v;				/* 0x34 */
-+	u32 gain_y;				/* 0x38 */
-+	u32 black_level;			/* 0x3C */
-+	u32 blank_level;			/* 0x40 */
-+	u32 x_color;				/* 0x44 */
-+	u32 m_control;				/* 0x48 */
-+	u32 bstamp_wss_data;			/* 0x4C */
-+	u32 s_carr;				/* 0x50 */
-+	u32 line21;				/* 0x54 */
-+	u32 ln_sel;				/* 0x58 */
-+	u32 l21__wc_ctl;			/* 0x5C */
-+	u32 htrigger_vtrigger;			/* 0x60 */
-+	u32 savid__eavid;			/* 0x64 */
-+	u32 flen__fal;				/* 0x68 */
-+	u32 lal__phase_reset;			/* 0x6C */
-+	u32 hs_int_start_stop_x;		/* 0x70 */
-+	u32 hs_ext_start_stop_x;		/* 0x74 */
-+	u32 vs_int_start_x;			/* 0x78 */
-+	u32 vs_int_stop_x__vs_int_start_y;	/* 0x7C */
-+	u32 vs_int_stop_y__vs_ext_start_x;	/* 0x80 */
-+	u32 vs_ext_stop_x__vs_ext_start_y;	/* 0x84 */
-+	u32 vs_ext_stop_y;			/* 0x88 */
-+	u32 reserve_3;				/* 0x8C */
-+	u32 avid_start_stop_x;			/* 0x90 */
-+	u32 avid_start_stop_y;			/* 0x94 */
-+	u32 reserve_4;				/* 0x98 */
-+	u32 reserve_5;				/* 0x9C */
-+	u32 fid_int_start_x__fid_int_start_y;	/* 0xA0 */
-+	u32 fid_int_offset_y__fid_ext_start_x;	/* 0xA4 */
-+	u32 fid_ext_start_y__fid_ext_offset_y;	/* 0xA8 */
-+	u32 reserve_6;				/* 0xAC */
-+	u32 tvdetgp_int_start_stop_x;		/* 0xB0 */
-+	u32 tvdetgp_int_start_stop_y;		/* 0xB4 */
-+	u32 gen_ctrl;				/* 0xB8 */
-+	u32 reserve_7;				/* 0xBC */
-+	u32 reserve_8;				/* 0xC0 */
-+	u32 output_control;			/* 0xC4 */
-+	u32 dac_b__dac_c;			/* 0xC8 */
-+	u32 height_width;			/* 0xCC */
-+};
-+
-+/* Few Register Offsets */
-+#define FRAME_MODE_SHIFT			1
-+#define TFTSTN_SHIFT				3
-+#define DATALINES_SHIFT				8
-+
-+/* Enabling Display controller */
-+#define LCD_ENABLE				1
-+#define DIG_ENABLE				(1 << 1)
-+#define GO_LCD					(1 << 5)
-+#define GO_DIG					(1 << 6)
-+#define GP_OUT0					(1 << 15)
-+#define GP_OUT1					(1 << 16)
-+
-+#define DISPC_ENABLE				(LCD_ENABLE | \
-+						 DIG_ENABLE | \
-+						 GO_LCD | \
-+						 GO_DIG | \
-+						 GP_OUT0| \
-+						 GP_OUT1)
-+
-+/* Configure VENC DSS Params */
-+#define VENC_CLK_ENABLE				(1 << 3)
-+#define DAC_DEMEN				(1 << 4)
-+#define DAC_POWERDN				(1 << 5)
-+#define VENC_OUT_SEL				(1 << 6)
-+#define DIG_LPP_SHIFT				16
-+#define VENC_DSS_CONFIG				(VENC_CLK_ENABLE | \
-+						 DAC_DEMEN | \
-+						 DAC_POWERDN | \
-+						 VENC_OUT_SEL)
-+/*
-+ * Panel Configuration
-+ */
-+struct panel_config {
-+	u32 timing_h;
-+	u32 timing_v;
-+	u32 pol_freq;
-+	u32 divisor;
-+	u32 lcd_size;
-+	u32 panel_type;
-+	u32 data_lines;
-+	u32 load_mode;
-+	u32 panel_color;
-+};
-+
-+/*
-+ * Generic DSS Functions
-+ */
-+void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
-+			u32 height, u32 width);
-+void omap3_dss_panel_config(const struct panel_config *panel_cfg);
-+void omap3_dss_enable(void);
-+
-+#endif /* DSS_H */
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index 97e9e12..56e7afc 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -146,6 +146,27 @@ unsigned int get_expansion_id(void)
- }
- 
- /*
-+ * Configure DSS to display background color on DVID
-+ * Configure VENC to display color bar on S-Video
-+ */
-+void display_init(void)
-+{
-+	omap3_dss_venc_config(&venc_config_std_tv, VENC_HEIGHT, VENC_WIDTH);
-+	switch (get_board_revision()) {
-+	case REVISION_AXBX:
-+	case REVISION_CX:
-+	case REVISION_C4:
-+		omap3_dss_panel_config(&dvid_cfg);
-+		break;
-+	case REVISION_XM_A:
-+	case REVISION_XM_B:
-+	default:
-+		omap3_dss_panel_config(&dvid_cfg_xm);
-+		break;
-+	}
-+}
-+
-+/*
-  * Routine: misc_init_r
-  * Description: Configure board specific parts
-  */
-@@ -282,6 +303,7 @@ int misc_init_r(void)
- 
- 	twl4030_power_init();
- 	twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
-+	display_init();
- 
- 	/* Set GPIO states before they are made outputs */
- 	writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1,
-diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
-index 0f21790..48228dc 100644
---- a/board/ti/beagle/beagle.h
-+++ b/board/ti/beagle/beagle.h
-@@ -470,4 +470,30 @@ const omap3_sysinfo sysinfo = {
- 	MUX_VAL(CP(MMC2_DAT6),      (IDIS | PTU | EN  | M4)) /*GPIO_138 BT_EN*/\
- 	MUX_VAL(CP(MMC2_DAT7),      (IDIS | PTU | EN  | M4)) /*GPIO_139 WLAN_EN*/
- 
-+/*
-+ * Configure Timings for DVI D
-+ */
-+static const struct panel_config dvid_cfg = {
-+	.timing_h	= 0x0ff03f31, /* Horizantal timing */
-+	.timing_v	= 0x01400504, /* Vertical timing */
-+	.pol_freq	= 0x00007028, /* Pol Freq */
-+	.divisor	= 0x00010006, /* 72Mhz Pixel Clock */
-+	.lcd_size	= 0x02ff03ff, /* 1024x768 */
-+	.panel_type	= 0x01, /* TFT */
-+	.data_lines	= 0x03, /* 24 Bit RGB */
-+	.load_mode	= 0x02, /* Frame Mode */
-+	.panel_color	= DVI_BEAGLE_ORANGE_COL /* ORANGE */
-+};
-+
-+static const struct panel_config dvid_cfg_xm = {
-+	.timing_h	= 0x1a4024c9, /* Horizantal timing */
-+	.timing_v	= 0x02c00509, /* Vertical timing */
-+	.pol_freq	= 0x00007028, /* Pol Freq */
-+	.divisor	= 0x00010001, /* 96MHz Pixel Clock */
-+	.lcd_size	= 0x02ff03ff, /* 1024x768 */
-+	.panel_type	= 0x01, /* TFT */
-+	.data_lines	= 0x03, /* 24 Bit RGB */
-+	.load_mode	= 0x02, /* Frame Mode */
-+	.panel_color	= DVI_BEAGLE_ORANGE_COL /* ORANGE */
-+};
- #endif
-diff --git a/drivers/video/Makefile b/drivers/video/Makefile
-index 2c53a6f..6baa7ca 100644
---- a/drivers/video/Makefile
-+++ b/drivers/video/Makefile
-@@ -41,6 +41,8 @@ COBJS-$(CONFIG_SED156X) += sed156x.o
- COBJS-$(CONFIG_VIDEO_SM501) += sm501.o
- COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o
- COBJS-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
-+COBJS-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o
-+COBJS-y += videomodes.o
- 
- COBJS	:= $(COBJS-y)
- SRCS	:= $(COBJS:.o=.c)
-diff --git a/drivers/video/omap3_dss.c b/drivers/video/omap3_dss.c
-new file mode 100644
-index 0000000..69c705a
---- /dev/null
-+++ b/drivers/video/omap3_dss.c
-@@ -0,0 +1,130 @@
-+/*
-+ * (C) Copyright 2010
-+ * Texas Instruments, <www.ti.com>
-+ * Syed Mohammed Khasim <khasim@ti.com>
-+ *
-+ * Referred to Linux DSS driver files for OMAP3
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation's version 2 of
-+ * the License.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <asm/io.h>
-+#include <asm/arch/dss.h>
-+
-+/*
-+ * Configure VENC for a given Mode (NTSC / PAL)
-+ */
-+void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
-+				u32 height, u32 width)
-+{
-+	struct venc_regs *venc = (struct venc_regs *) OMAP3_VENC_BASE;
-+	struct dss_regs *dss = (struct dss_regs *) OMAP3_DSS_BASE;
-+	struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
-+
-+	writel(venc_cfg->status, &venc->status);
-+	writel(venc_cfg->f_control, &venc->f_control);
-+	writel(venc_cfg->vidout_ctrl, &venc->vidout_ctrl);
-+	writel(venc_cfg->sync_ctrl, &venc->sync_ctrl);
-+	writel(venc_cfg->llen, &venc->llen);
-+	writel(venc_cfg->flens, &venc->flens);
-+	writel(venc_cfg->hfltr_ctrl, &venc->hfltr_ctrl);
-+	writel(venc_cfg->cc_carr_wss_carr, &venc->cc_carr_wss_carr);
-+	writel(venc_cfg->c_phase, &venc->c_phase);
-+	writel(venc_cfg->gain_u, &venc->gain_u);
-+	writel(venc_cfg->gain_v, &venc->gain_v);
-+	writel(venc_cfg->gain_y, &venc->gain_y);
-+	writel(venc_cfg->black_level, &venc->black_level);
-+	writel(venc_cfg->blank_level, &venc->blank_level);
-+	writel(venc_cfg->x_color, &venc->x_color);
-+	writel(venc_cfg->m_control, &venc->m_control);
-+	writel(venc_cfg->bstamp_wss_data, &venc->bstamp_wss_data);
-+	writel(venc_cfg->s_carr, &venc->s_carr);
-+	writel(venc_cfg->line21, &venc->line21);
-+	writel(venc_cfg->ln_sel, &venc->ln_sel);
-+	writel(venc_cfg->l21__wc_ctl, &venc->l21__wc_ctl);
-+	writel(venc_cfg->htrigger_vtrigger, &venc->htrigger_vtrigger);
-+	writel(venc_cfg->savid__eavid, &venc->savid__eavid);
-+	writel(venc_cfg->flen__fal, &venc->flen__fal);
-+	writel(venc_cfg->lal__phase_reset, &venc->lal__phase_reset);
-+	writel(venc_cfg->hs_int_start_stop_x,
-+				&venc->hs_int_start_stop_x);
-+	writel(venc_cfg->hs_ext_start_stop_x,
-+				&venc->hs_ext_start_stop_x);
-+	writel(venc_cfg->vs_int_start_x, &venc->vs_int_start_x);
-+	writel(venc_cfg->vs_int_stop_x__vs_int_start_y,
-+			&venc->vs_int_stop_x__vs_int_start_y);
-+	writel(venc_cfg->vs_int_stop_y__vs_ext_start_x,
-+			&venc->vs_int_stop_y__vs_ext_start_x);
-+	writel(venc_cfg->vs_ext_stop_x__vs_ext_start_y,
-+			&venc->vs_ext_stop_x__vs_ext_start_y);
-+	writel(venc_cfg->vs_ext_stop_y, &venc->vs_ext_stop_y);
-+	writel(venc_cfg->avid_start_stop_x, &venc->avid_start_stop_x);
-+	writel(venc_cfg->avid_start_stop_y, &venc->avid_start_stop_y);
-+	writel(venc_cfg->fid_int_start_x__fid_int_start_y,
-+				&venc->fid_int_start_x__fid_int_start_y);
-+	writel(venc_cfg->fid_int_offset_y__fid_ext_start_x,
-+				&venc->fid_int_offset_y__fid_ext_start_x);
-+	writel(venc_cfg->fid_ext_start_y__fid_ext_offset_y,
-+				&venc->fid_ext_start_y__fid_ext_offset_y);
-+	writel(venc_cfg->tvdetgp_int_start_stop_x,
-+				&venc->tvdetgp_int_start_stop_x);
-+	writel(venc_cfg->tvdetgp_int_start_stop_y,
-+				&venc->tvdetgp_int_start_stop_y);
-+	writel(venc_cfg->gen_ctrl, &venc->gen_ctrl);
-+	writel(venc_cfg->output_control, &venc->output_control);
-+	writel(venc_cfg->dac_b__dac_c, &venc->dac_b__dac_c);
-+
-+	/* Configure DSS for VENC Settings */
-+	writel(VENC_DSS_CONFIG, &dss->control);
-+
-+	/* Configure height and width for Digital out */
-+	writel(((height << DIG_LPP_SHIFT) | width), &dispc->size_dig);
-+}
-+
-+/*
-+ * Configure Panel Specific Parameters
-+ */
-+void omap3_dss_panel_config(const struct panel_config *panel_cfg)
-+{
-+	struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
-+
-+	writel(panel_cfg->timing_h, &dispc->timing_h);
-+	writel(panel_cfg->timing_v, &dispc->timing_v);
-+	writel(panel_cfg->pol_freq, &dispc->pol_freq);
-+	writel(panel_cfg->divisor, &dispc->divisor);
-+	writel(panel_cfg->lcd_size, &dispc->size_lcd);
-+	writel((panel_cfg->load_mode << FRAME_MODE_SHIFT), &dispc->config);
-+	writel(((panel_cfg->panel_type << TFTSTN_SHIFT) |
-+		(panel_cfg->data_lines << DATALINES_SHIFT)), &dispc->control);
-+	writel(panel_cfg->panel_color, &dispc->default_color0);
-+}
-+
-+/*
-+ * Enable LCD and DIGITAL OUT in DSS
-+ */
-+void omap3_dss_enable(void)
-+{
-+	struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
-+	u32 l = 0;
-+
-+	l = readl(&dispc->control);
-+	l |= DISPC_ENABLE;
-+	writel(l, &dispc->control);
-+}
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/0008-BeagleBoard-Added-userbutton-command.patch

@@ -1,100 +0,0 @@
-From 31110e039b1982590df08c66e53924f454e3e3f1 Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Wed, 21 Jul 2010 07:41:25 -0500
-Subject: [PATCH 08/16] BeagleBoard: Added userbutton command
-
-Based on commit f1099c7c43caf5bac3bf6a65aa266fade4747072
-    Author: Greg Turner <gregturner@ti.com>
-    Date:   Tue May 25 09:19:06 2010 -0500
-
-    New u-boot command for status of USER button on BeagleBoard-xM
-
-         Modified bootcmd to check the staus at boot time and set
-	 filename of the boot script.
-
-* Moved to a BeagleBoard specific file.
-* Removed changes to default boot command from adding userbutton
-  command.
-* Made to handle pre-xM boards.
-* Flipped polarity of the return value to avoid confusion.  Success (0)
-  is when the button is pressed.  Failure (1) is when the button is NOT
-  pressed.
-* Used latest revision getting function.
-* Used latest macros for board revision.
----
- board/ti/beagle/beagle.c |   55 ++++++++++++++++++++++++++++++++++++++++++++++
- 1 files changed, 55 insertions(+), 0 deletions(-)
-
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index 56e7afc..04e4259 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -38,6 +38,7 @@
- #include <asm/arch/gpio.h>
- #include <asm/mach-types.h>
- #include "beagle.h"
-+#include <command.h>
- 
- #define TWL4030_I2C_BUS			0
- #define EXPANSION_EEPROM_I2C_BUS	1
-@@ -339,3 +340,57 @@ int board_mmc_init(bd_t *bis)
- 	return 0;
- }
- #endif
-+
-+/*
-+ * This command returns the status of the user button on beagle xM
-+ * Input - none
-+ * Returns - 	1 if button is held down
-+ *		0 if button is not held down
-+ */
-+int do_userbutton (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+	int     button = 0;
-+	int	gpio;
-+
-+	/*
-+	 * pass address parameter as argv[0] (aka command name),
-+	 * and all remaining args
-+	 */
-+	switch (get_board_revision()) {
-+	case REVISION_AXBX:
-+	case REVISION_CX:
-+	case REVISION_C4:
-+		gpio = 7;
-+		break;
-+	case REVISION_XM_A:
-+	case REVISION_XM_B:
-+	default:
-+		gpio = 4;
-+		break;
-+	}
-+	omap_request_gpio(gpio);
-+	omap_set_gpio_direction(gpio, 1);
-+	printf("The user button is currently ");
-+	if(omap_get_gpio_datain(gpio))
-+	{
-+		button = 1;
-+		printf("PRESSED.\n");
-+	}
-+	else
-+	{
-+		button = 0;
-+		printf("NOT pressed.\n");
-+	}
-+
-+	omap_free_gpio(gpio);
-+
-+	return !button;
-+}
-+
-+/* -------------------------------------------------------------------- */
-+
-+U_BOOT_CMD(
-+	userbutton, CONFIG_SYS_MAXARGS, 1,	do_userbutton,
-+	"Return the status of the BeagleBoard USER button",
-+	""
-+);
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/0009-OMAP3-beagle-pass-expansionboard-name-in-bootargs.patch

@@ -1,57 +0,0 @@
-From ca7179112840cdca717ac0c958a9ab226d1bdf25 Mon Sep 17 00:00:00 2001
-From: Koen Kooi <koen@dominion.thruhere.net>
-Date: Mon, 22 Nov 2010 11:51:32 +0100
-Subject: [PATCH 09/16] OMAP3: beagle: pass expansionboard name in bootargs
-
----
- include/configs/omap3_beagle.h |   13 +++++++++++++
- 1 files changed, 13 insertions(+), 0 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 51e14d0..9d569a5 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -191,6 +191,7 @@
- 	"usbtty=cdc_acm\0" \
- 	"console=ttyS2,115200n8\0" \
- 	"mpurate=auto\0" \
-+	"buddy=none "\
- 	"vram=12M\0" \
- 	"dvimode=1024x768MR-16@60\0" \
- 	"defaultdisplay=dvi\0" \
-@@ -201,6 +202,7 @@
- 	"nandrootfstype=jffs2\0" \
- 	"mmcargs=setenv bootargs console=${console} " \
- 		"mpurate=${mpurate} " \
-+		"buddy=${buddy} "\
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
- 		"omapdss.def_disp=${defaultdisplay} " \
-@@ -208,6 +210,7 @@
- 		"rootfstype=${mmcrootfstype}\0" \
- 	"nandargs=setenv bootargs console=${console} " \
- 		"mpurate=${mpurate} " \
-+		"buddy=${buddy} "\
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
- 		"omapdss.def_disp=${defaultdisplay} " \
-@@ -216,6 +219,16 @@
- 	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
- 	"importbootenv=echo Importing environment from mmc ...; " \
- 		"env import -t $loadaddr $filesize\0" \
-+	"ramargs=setenv bootargs console=${console} " \
-+		"${optargs} " \
-+		"mpurate=${mpurate} " \
-+		"buddy=${buddy} "\
-+		"vram=${vram} " \
-+		"omapfb.mode=dvi:${dvimode} " \
-+		"omapdss.def_disp=${defaultdisplay} " \
-+		"root=${ramroot} " \
-+		"rootfstype=${ramrootfstype}\0" \
-+	"loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
- 	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
- 	"mmcboot=echo Booting from mmc ...; " \
- 		"run mmcargs; " \
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/0010-Enable-DSS-driver-for-Beagle.patch

@@ -1,107 +0,0 @@
-From 2226921518eebb215ddadce09efb35b99a9db8ac Mon Sep 17 00:00:00 2001
-From: Syed Mohammed Khasim <khasim@ti.com>
-Date: Sun, 11 Apr 2010 17:44:39 +0200
-Subject: [PATCH 10/16] Enable DSS driver for Beagle
-
-Configures DSS to display color bar on Svideo
-Configures DSS to display background color on DVID
-
-Signed-off-by: Syed Mohammed Khasim <khasim@ti.com>
----
- board/ti/beagle/beagle.c |    1 +
- board/ti/beagle/beagle.h |   60 ++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 61 insertions(+), 0 deletions(-)
-
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index 04e4259..7c80a97 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -318,6 +318,7 @@ int misc_init_r(void)
- 		GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
- 
- 	dieid_num_r();
-+	omap3_dss_enable();
- 
- 	return 0;
- }
-diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
-index 48228dc..bdf2a6f 100644
---- a/board/ti/beagle/beagle.h
-+++ b/board/ti/beagle/beagle.h
-@@ -23,6 +23,8 @@
- #ifndef _BEAGLE_H_
- #define _BEAGLE_H_
- 
-+#include <asm/arch/dss.h>
-+
- const omap3_sysinfo sysinfo = {
- 	DDR_STACKED,
- 	"OMAP3 Beagle board",
-@@ -471,6 +473,64 @@ const omap3_sysinfo sysinfo = {
- 	MUX_VAL(CP(MMC2_DAT7),      (IDIS | PTU | EN  | M4)) /*GPIO_139 WLAN_EN*/
- 
- /*
-+ * Display Configuration
-+ */
-+
-+#define DVI_BEAGLE_ORANGE_COL		0x00FF8000
-+#define VENC_HEIGHT			0x00ef
-+#define VENC_WIDTH			0x027f
-+
-+/*
-+ * Configure VENC in DSS for Beagle to generate Color Bar
-+ *
-+ * Kindly refer to OMAP TRM for definition of these values.
-+ */
-+static const struct venc_regs venc_config_std_tv = {
-+	.status					= 0x0000001B,
-+	.f_control				= 0x00000040,
-+	.vidout_ctrl				= 0x00000000,
-+	.sync_ctrl				= 0x00008000,
-+	.llen					= 0x00008359,
-+	.flens					= 0x0000020C,
-+	.hfltr_ctrl				= 0x00000000,
-+	.cc_carr_wss_carr			= 0x043F2631,
-+	.c_phase				= 0x00000024,
-+	.gain_u					= 0x00000130,
-+	.gain_v					= 0x00000198,
-+	.gain_y					= 0x000001C0,
-+	.black_level				= 0x0000006A,
-+	.blank_level				= 0x0000005C,
-+	.x_color				= 0x00000000,
-+	.m_control				= 0x00000001,
-+	.bstamp_wss_data			= 0x0000003F,
-+	.s_carr					= 0x21F07C1F,
-+	.line21					= 0x00000000,
-+	.ln_sel					= 0x00000015,
-+	.l21__wc_ctl				= 0x00001400,
-+	.htrigger_vtrigger			= 0x00000000,
-+	.savid__eavid				= 0x069300F4,
-+	.flen__fal				= 0x0016020C,
-+	.lal__phase_reset			= 0x00060107,
-+	.hs_int_start_stop_x			= 0x008D034E,
-+	.hs_ext_start_stop_x			= 0x000F0359,
-+	.vs_int_start_x				= 0x01A00000,
-+	.vs_int_stop_x__vs_int_start_y		= 0x020501A0,
-+	.vs_int_stop_y__vs_ext_start_x		= 0x01AC0024,
-+	.vs_ext_stop_x__vs_ext_start_y		= 0x020D01AC,
-+	.vs_ext_stop_y				= 0x00000006,
-+	.avid_start_stop_x			= 0x03480079,
-+	.avid_start_stop_y			= 0x02040024,
-+	.fid_int_start_x__fid_int_start_y	= 0x0001008A,
-+	.fid_int_offset_y__fid_ext_start_x	= 0x01AC0106,
-+	.fid_ext_start_y__fid_ext_offset_y	= 0x01060006,
-+	.tvdetgp_int_start_stop_x		= 0x00140001,
-+	.tvdetgp_int_start_stop_y		= 0x00010001,
-+	.gen_ctrl				= 0x00FF0000,
-+	.output_control				= 0x0000000D,
-+	.dac_b__dac_c				= 0x00000000
-+};
-+
-+/*
-  * Configure Timings for DVI D
-  */
- static const struct panel_config dvid_cfg = {
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/0011-Add-led-command.patch

@@ -1,213 +0,0 @@
-From e3e94bd49df4b4588cc5c95392b872eadb531fc4 Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Thu, 20 May 2010 05:41:26 -0500
-Subject: [PATCH 11/16] Add 'led' command
-
-This patch allows any board implementing the coloured LED API
-to control the LEDs from the console.
-
-led [green | yellow | red | all ]  [ on | off ]
-
-or
-
-led [ 1 | 2 | 3 | all ]  [ on | off ]
-
-Adds configuration item CONFIG_CMD_LED enabling the command.
-
-Partially based on patch from Ulf Samuelsson:
-http://www.mail-archive.com/u-boot@lists.denx.de/msg09593.html.
-
-Updated based on feedback:
-http://www.mail-archive.com/u-boot@lists.denx.de/msg41847.html
-https://groups.google.com/d/topic/beagleboard/8Wf1HiK_QBo/discussion
-* Fixed a handful of style issues.
-* Significantly reduced the number of #ifdefs and redundant code
-* Converted redundant code into loops test against a structure
-* Made use of cmd_usage()
-* Introduced a str_onoff() function, but haven't yet put it in common
-* Eliminated trailing newline
-
-v2 updates
- * Test every LED in case "all" is used.  Previously, the code broke from
-   the loop after setting the state of only one LED.
- * Corrected swapped on/off in structure definition
- * Removed trailing white space
----
- common/Makefile  |    1 +
- common/cmd_led.c |  152 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 153 insertions(+), 0 deletions(-)
- create mode 100644 common/cmd_led.c
-
-diff --git a/common/Makefile b/common/Makefile
-index 048df0c..29a0ead 100644
---- a/common/Makefile
-+++ b/common/Makefile
-@@ -105,6 +105,7 @@ COBJS-$(CONFIG_CMD_IRQ) += cmd_irq.o
- COBJS-$(CONFIG_CMD_ITEST) += cmd_itest.o
- COBJS-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o
- COBJS-$(CONFIG_CMD_CRAMFS) += cmd_cramfs.o
-+COBJS-$(CONFIG_CMD_LED) += cmd_led.o
- COBJS-$(CONFIG_CMD_LICENSE) += cmd_license.o
- COBJS-y += cmd_load.o
- COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o
-diff --git a/common/cmd_led.c b/common/cmd_led.c
-new file mode 100644
-index 0000000..7f02fe6
---- /dev/null
-+++ b/common/cmd_led.c
-@@ -0,0 +1,152 @@
-+/*
-+ * (C) Copyright 2010
-+ * Jason Kridner <jkridner@beagleboard.org>
-+ *
-+ * Based on cmd_led.c patch from:
-+ * http://www.mail-archive.com/u-boot@lists.denx.de/msg06873.html
-+ * (C) Copyright 2008
-+ * Ulf Samuelsson <ulf.samuelsson@atmel.com>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <config.h>
-+#include <command.h>
-+#include <status_led.h>
-+
-+struct led_tbl_s {
-+	char		*string;	/* String for use in the command */
-+	led_id_t	mask;		/* Mask used for calling __led_set() */
-+	void		(*off)(void);	/* Optional fucntion for turning LED off */
-+	void		(*on)(void);	/* Optional fucntion for turning LED on */
-+};
-+
-+typedef struct led_tbl_s led_tbl_t;
-+
-+static const led_tbl_t led_commands[] = {
-+#ifdef CONFIG_BOARD_SPECIFIC_LED
-+#ifdef STATUS_LED_BIT
-+	{ "0", STATUS_LED_BIT, NULL, NULL },
-+#endif
-+#ifdef STATUS_LED_BIT1
-+	{ "1", STATUS_LED_BIT1, NULL, NULL },
-+#endif
-+#ifdef STATUS_LED_BIT2
-+	{ "2", STATUS_LED_BIT2, NULL, NULL },
-+#endif
-+#ifdef STATUS_LED_BIT3
-+	{ "3", STATUS_LED_BIT3, NULL, NULL },
-+#endif
-+#endif
-+#ifdef STATUS_LED_GREEN
-+	{ "green", STATUS_LED_GREEN, green_LED_off, green_LED_on },
-+#endif
-+#ifdef STATUS_LED_YELLOW
-+	{ "yellow", STATUS_LED_YELLOW, yellow_LED_off, yellow_LED_on },
-+#endif
-+#ifdef STATUS_LED_RED
-+	{ "red", STATUS_LED_RED, red_LED_off, red_LED_on },
-+#endif
-+#ifdef STATUS_LED_BLUE
-+	{ "blue", STATUS_LED_BLUE, blue_LED_off, blue_LED_on },
-+#endif
-+	{ NULL, 0, NULL, NULL }
-+};
-+
-+int str_onoff (char *var)
-+{
-+	if (strcmp(var, "off") == 0) {
-+		return 0;
-+	}
-+	if (strcmp(var, "on") == 0) {
-+		return 1;
-+	}
-+	return -1;
-+}
-+
-+int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-+{
-+	int state, i;
-+
-+	/* Validate arguments */
-+	if ((argc != 3)) {
-+		return cmd_usage(cmdtp);
-+	}
-+
-+	state = str_onoff(argv[2]);
-+	if (state < 0) {
-+		return cmd_usage(cmdtp);
-+	}
-+
-+	for (i = 0; led_commands[i].string; i++) {
-+		if ((strcmp("all", argv[1]) == 0) ||
-+		    (strcmp(led_commands[i].string, argv[1]) == 0)) {
-+			if (led_commands[i].on) {
-+				if (state) {
-+					led_commands[i].on();
-+				} else {
-+					led_commands[i].off();
-+				}
-+			} else {
-+				__led_set(led_commands[i].mask, state);
-+			}
-+		}
-+	}
-+
-+	/* If we ran out of matches, print Usage */
-+	if (!led_commands[i].string && !(strcmp("all", argv[1]) == 0)) {
-+		return cmd_usage(cmdtp);
-+	}
-+
-+	return 0;
-+}
-+
-+U_BOOT_CMD(
-+	led, 3, 1, do_led,
-+	"led\t- ["
-+#ifdef CONFIG_BOARD_SPECIFIC_LED
-+#ifdef STATUS_LED_BIT
-+	"0|"
-+#endif
-+#ifdef STATUS_LED_BIT1
-+	"1|"
-+#endif
-+#ifdef STATUS_LED_BIT2
-+	"2|"
-+#endif
-+#ifdef STATUS_LED_BIT3
-+	"3|"
-+#endif
-+#endif
-+#ifdef STATUS_LED_GREEN
-+	"green|"
-+#endif
-+#ifdef STATUS_LED_YELLOW
-+	"yellow|"
-+#endif
-+#ifdef STATUS_LED_RED
-+	"red|"
-+#endif
-+#ifdef STATUS_LED_BLUE
-+	"blue|"
-+#endif
-+	"all] [on|off]\n",
-+	"led [led_name] [on|off] sets or clears led(s)\n"
-+);
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/0012-BeagleBoard-Added-LED-driver.patch

@@ -1,160 +0,0 @@
-From 35271d72072841c16687ffd51f08ec65cdac3b3e Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Thu, 20 May 2010 06:14:01 -0500
-Subject: [PATCH 12/16] BeagleBoard: Added LED driver
-
-Added LED driver using status_led.  USR0 is set to monitor the boot
-status.  USR1 is set to be the green LED.
-
-Included adding configuration and command to the default configuration.
-
-v2 updates
- * Fixed USR0/USR1 to be LED 0/1 respectively
----
- board/ti/beagle/Makefile |    4 ++-
- board/ti/beagle/beagle.c |    7 ++++
- board/ti/beagle/led.c    |   91 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 101 insertions(+), 1 deletions(-)
- create mode 100644 board/ti/beagle/led.c
-
-diff --git a/board/ti/beagle/Makefile b/board/ti/beagle/Makefile
-index 3b4aaac..d9f445f 100644
---- a/board/ti/beagle/Makefile
-+++ b/board/ti/beagle/Makefile
-@@ -25,8 +25,10 @@ include $(TOPDIR)/config.mk
- 
- LIB	= $(obj)lib$(BOARD).o
- 
--COBJS	:= beagle.o
-+COBJS-y	:= $(BOARD).o
-+COBJS-$(CONFIG_STATUS_LED) += led.o
- 
-+COBJS	:= $(sort $(COBJS-y))
- SRCS	:= $(COBJS:.o=.c)
- OBJS	:= $(addprefix $(obj),$(COBJS))
- 
-diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
-index 7c80a97..905b151 100644
---- a/board/ti/beagle/beagle.c
-+++ b/board/ti/beagle/beagle.c
-@@ -30,6 +30,9 @@
-  * MA 02111-1307 USA
-  */
- #include <common.h>
-+#ifdef CONFIG_STATUS_LED
-+#include <status_led.h>
-+#endif
- #include <twl4030.h>
- #include <asm/io.h>
- #include <asm/arch/mmc_host_def.h>
-@@ -80,6 +83,10 @@ int board_init(void)
- 	/* boot param addr */
- 	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
- 
-+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
-+	status_led_set (STATUS_LED_BOOT, STATUS_LED_ON);
-+#endif
-+
- 	return 0;
- }
- 
-diff --git a/board/ti/beagle/led.c b/board/ti/beagle/led.c
-new file mode 100644
-index 0000000..fe80e19
---- /dev/null
-+++ b/board/ti/beagle/led.c
-@@ -0,0 +1,91 @@
-+/*
-+ * Copyright (c) 2010 Texas Instruments, Inc.
-+ * Jason Kridner <jkridner@beagleboard.org>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+#include <common.h>
-+#include <status_led.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/io.h>
-+#include <asm/arch/sys_proto.h>
-+#include <asm/arch/gpio.h>
-+
-+static unsigned int saved_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF};
-+
-+/* GPIO pins for the LEDs */
-+#define BEAGLE_LED_USR0	150
-+#define BEAGLE_LED_USR1	149
-+
-+#ifdef STATUS_LED_GREEN
-+void green_LED_off (void)
-+{
-+	__led_set (STATUS_LED_GREEN, 0);
-+}
-+
-+void green_LED_on (void)
-+{
-+	__led_set (STATUS_LED_GREEN, 1);
-+}
-+#endif
-+
-+void __led_init (led_id_t mask, int state)
-+{
-+	__led_set (mask, state);
-+}
-+
-+void __led_toggle (led_id_t mask)
-+{
-+#ifdef STATUS_LED_BIT
-+	if (STATUS_LED_BIT & mask) {
-+		if (STATUS_LED_ON == saved_state[0])
-+			__led_set(STATUS_LED_BIT, 0);
-+		else
-+			__led_set(STATUS_LED_BIT, 1);
-+	}
-+#endif
-+#ifdef STATUS_LED_BIT1
-+	if (STATUS_LED_BIT1 & mask) {
-+		if (STATUS_LED_ON == saved_state[1])
-+			__led_set(STATUS_LED_BIT1, 0);
-+		else
-+			__led_set(STATUS_LED_BIT1, 1);
-+	}
-+#endif
-+}
-+
-+void __led_set (led_id_t mask, int state)
-+{
-+#ifdef STATUS_LED_BIT
-+	if (STATUS_LED_BIT & mask) {
-+		if (!omap_request_gpio(BEAGLE_LED_USR0)) {
-+			omap_set_gpio_direction(BEAGLE_LED_USR0, 0);
-+			omap_set_gpio_dataout(BEAGLE_LED_USR0, state);
-+		}
-+		saved_state[0] = state;
-+	}
-+#endif
-+#ifdef STATUS_LED_BIT1
-+	if (STATUS_LED_BIT1 & mask) {
-+		if (!omap_request_gpio(BEAGLE_LED_USR1)) {
-+			omap_set_gpio_direction(BEAGLE_LED_USR1, 0);
-+			omap_set_gpio_dataout(BEAGLE_LED_USR1, state);
-+		}
-+		saved_state[1] = state;
-+	}
-+#endif
-+}
-+
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/0013-OMAP3-BeagleBoard-updated-default-configuration.patch

@@ -1,184 +0,0 @@
-From da8fa305fd10331958cd18c9c27c9e062b886fc4 Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Wed, 21 Jul 2010 07:41:25 -0500
-Subject: [PATCH 13/16] OMAP3: BeagleBoard: updated default configuration
-
-* Decrease bootdelay to 3, use VGA for default resolution
-* Add CONFIG_SYS_MEMTEST_SCRATCH to point to a scratch memory area.
-* Add camera to default bootargs
-* Move ramdisk parameters. This will make it easier to reprogram the ramdisk size.
-* Improved boot env var setting
-    * Enabled evaluation of expressions with 'setexpr'
-    * Made room for a 64MB ramdisk by moving from 0x81600000 to 0x81000000
-    * Removed expression from 'ramroot' that wouldn't be evaluated
-    * Doubled console I/O buffer size from 256 to 512
-    * Doubled maximum command arguments size from 16 to 32
-* Enable multibus support for I2C
-* Added USER button switch from uEnv.txt to user.txt
-* Enable LEDs
-    Added LED driver using status_led.  USR0 is set to monitor
-    the boot status.  USR1 is set to be the GREEN LED.
----
- include/configs/omap3_beagle.h |   62 ++++++++++++++++++++++++++++++++-------
- 1 files changed, 51 insertions(+), 11 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 9d569a5..73d4d4e 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -108,9 +108,27 @@
- #define CONFIG_OMAP_HSMMC		1
- #define CONFIG_DOS_PARTITION		1
- 
-+/* Status LED */
-+#define CONFIG_STATUS_LED		1
-+#define CONFIG_BOARD_SPECIFIC_LED	1
-+#define STATUS_LED_BIT			0x01
-+#define STATUS_LED_STATE		STATUS_LED_ON
-+#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
-+#define STATUS_LED_BIT1			0x02
-+#define STATUS_LED_STATE1		STATUS_LED_ON
-+#define STATUS_LED_PERIOD1		(CONFIG_SYS_HZ / 2)
-+#define STATUS_LED_BOOT			STATUS_LED_BIT
-+#define STATUS_LED_GREEN		STATUS_LED_BIT1
-+
- /* DDR - I use Micron DDR */
- #define CONFIG_OMAP3_MICRON_DDR		1
- 
-+/* Enable Multi Bus support for I2C */
-+#define CONFIG_I2C_MULTI_BUS		1
-+
-+/* Probe all devices */
-+#define CONFIG_SYS_I2C_NOPROBES		{0x0, 0x0}
-+
- /* USB */
- #define CONFIG_MUSB_UDC			1
- #define CONFIG_USB_OMAP3		1
-@@ -138,6 +156,9 @@
- #define CONFIG_CMD_I2C		/* I2C serial bus support	*/
- #define CONFIG_CMD_MMC		/* MMC support			*/
- #define CONFIG_CMD_NAND		/* NAND support			*/
-+#define CONFIG_CMD_LED		/* LED support			*/
-+#define CONFIG_VIDEO_OMAP3	/* DSS Support			*/
-+#define CONFIG_CMD_SETEXPR	/* Evaluate expressions		*/
- 
- #undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
- #undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
-@@ -184,45 +205,56 @@
- 							/* partition */
- 
- /* Environment information */
--#define CONFIG_BOOTDELAY		10
-+#define CONFIG_BOOTDELAY		3
- 
- #define CONFIG_EXTRA_ENV_SETTINGS \
--	"loadaddr=0x82000000\0" \
-+	"loadaddr=0x80200000\0" \
-+	"rdaddr=0x81000000\0" \
- 	"usbtty=cdc_acm\0" \
- 	"console=ttyS2,115200n8\0" \
- 	"mpurate=auto\0" \
- 	"buddy=none "\
-+	"optargs=\0" \
-+	"camera=lbcm3m1\0" \
- 	"vram=12M\0" \
--	"dvimode=1024x768MR-16@60\0" \
-+	"dvimode=640x480MR-16@60\0" \
- 	"defaultdisplay=dvi\0" \
- 	"mmcdev=0\0" \
- 	"mmcroot=/dev/mmcblk0p2 rw\0" \
- 	"mmcrootfstype=ext3 rootwait\0" \
- 	"nandroot=/dev/mtdblock4 rw\0" \
- 	"nandrootfstype=jffs2\0" \
-+	"ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \
-+	"ramrootfstype=ext2\0" \
- 	"mmcargs=setenv bootargs console=${console} " \
-+		"${optargs} " \
- 		"mpurate=${mpurate} " \
- 		"buddy=${buddy} "\
-+		"camera=${camera} "\
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
- 		"omapdss.def_disp=${defaultdisplay} " \
- 		"root=${mmcroot} " \
- 		"rootfstype=${mmcrootfstype}\0" \
- 	"nandargs=setenv bootargs console=${console} " \
-+		"${optargs} " \
- 		"mpurate=${mpurate} " \
- 		"buddy=${buddy} "\
-+		"camera=${camera} "\
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
- 		"omapdss.def_disp=${defaultdisplay} " \
- 		"root=${nandroot} " \
- 		"rootfstype=${nandrootfstype}\0" \
--	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
-+	"bootenv=uEnv.txt\0" \
-+	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
- 	"importbootenv=echo Importing environment from mmc ...; " \
- 		"env import -t $loadaddr $filesize\0" \
- 	"ramargs=setenv bootargs console=${console} " \
- 		"${optargs} " \
- 		"mpurate=${mpurate} " \
- 		"buddy=${buddy} "\
-+		"camera=${camera} "\
- 		"vram=${vram} " \
- 		"omapfb.mode=dvi:${dvimode} " \
- 		"omapdss.def_disp=${defaultdisplay} " \
-@@ -237,11 +269,18 @@
- 		"run nandargs; " \
- 		"nand read ${loadaddr} 280000 400000; " \
- 		"bootm ${loadaddr}\0" \
-+	"ramboot=echo Booting from ramdisk ...; " \
-+		"run ramargs; " \
-+		"bootm ${loadaddr}\0" \
- 
- #define CONFIG_BOOTCOMMAND \
- 	"if mmc rescan ${mmcdev}; then " \
-+		"if userbutton; then " \
-+			"setenv bootenv user.txt;" \
-+		"fi;" \
- 		"echo SD/MMC found on device ${mmcdev};" \
- 		"if run loadbootenv; then " \
-+			"echo Loaded environment from ${bootenv};" \
- 			"run importbootenv;" \
- 		"fi;" \
- 		"if test -n $uenvcmd; then " \
-@@ -252,7 +291,7 @@
- 			"run mmcboot;" \
- 		"fi;" \
- 	"fi;" \
--	"run nandboot;" \
-+	"run nandboot;"
- 
- #define CONFIG_AUTO_COMPLETE		1
- /*
-@@ -262,18 +301,19 @@
- #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
- #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
- #define CONFIG_SYS_PROMPT		"OMAP3 beagleboard.org # "
--#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
-+#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
- /* Print Buffer Size */
- #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
- 					sizeof(CONFIG_SYS_PROMPT) + 16)
--#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-+#define CONFIG_SYS_MAXARGS		32	/* max number of command args */
- /* Boot Argument Buffer Size */
- #define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
- 
--#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
--								/* works on */
--#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
--					0x01F00000) /* 31MB */
-+#define CONFIG_SYS_ALT_MEMTEST		1
-+#define CONFIG_SYS_MEMTEST_START	(0x82000000)		/* memtest */
-+								/* defaults */
-+#define CONFIG_SYS_MEMTEST_END		(0x87FFFFFF) 		/* 128MB */
-+#define CONFIG_SYS_MEMTEST_SCRATCH	(0x81000000)	/* dummy address */
- 
- #define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
- 							/* load address */
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/0014-Corrected-LED-name-match-finding-avoiding-extraneous.patch

@@ -1,42 +0,0 @@
-From abc09e8f0b8e02dbfec8bb3c2e024ef9f1bdf4f0 Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Tue, 8 Mar 2011 20:42:01 -0600
-Subject: [PATCH 14/16] Corrected LED name match finding avoiding extraneous Usage printouts
-
----
- common/cmd_led.c |    5 +++--
- 1 files changed, 3 insertions(+), 2 deletions(-)
-
-diff --git a/common/cmd_led.c b/common/cmd_led.c
-index 7f02fe6..ca2227f 100644
---- a/common/cmd_led.c
-+++ b/common/cmd_led.c
-@@ -83,7 +83,7 @@ int str_onoff (char *var)
- 
- int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
- {
--	int state, i;
-+	int state, i, match = 0;
- 
- 	/* Validate arguments */
- 	if ((argc != 3)) {
-@@ -98,6 +98,7 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
- 	for (i = 0; led_commands[i].string; i++) {
- 		if ((strcmp("all", argv[1]) == 0) ||
- 		    (strcmp(led_commands[i].string, argv[1]) == 0)) {
-+		    	match = 1;
- 			if (led_commands[i].on) {
- 				if (state) {
- 					led_commands[i].on();
-@@ -111,7 +112,7 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
- 	}
- 
- 	/* If we ran out of matches, print Usage */
--	if (!led_commands[i].string && !(strcmp("all", argv[1]) == 0)) {
-+	if (!match) {
- 		return cmd_usage(cmdtp);
- 	}
- 
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/0015-omap3_beagle-Switch-default-console-from-ttyS2-to-tt.patch

@@ -1,29 +0,0 @@
-From 1a88890580917571811950eabd877cccdb643cb1 Mon Sep 17 00:00:00 2001
-From: Alexander Holler <holler@ahsoftware.de>
-Date: Thu, 17 Feb 2011 22:37:57 +0000
-Subject: [PATCH 15/16] omap3_beagle: Switch default console from ttyS2 to ttyO2
-
-Linux kernels >= 2.6.36 are using ttyOn instead ttySn for the
-serials on OMAPs.
-
-Signed-off-by: Alexander Holler <holler@ahsoftware.de>
----
- include/configs/omap3_beagle.h |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index 73d4d4e..de572e8 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -211,7 +211,7 @@
- 	"loadaddr=0x80200000\0" \
- 	"rdaddr=0x81000000\0" \
- 	"usbtty=cdc_acm\0" \
--	"console=ttyS2,115200n8\0" \
-+	"console=ttyO2,115200n8\0" \
- 	"mpurate=auto\0" \
- 	"buddy=none "\
- 	"optargs=\0" \
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/0016-BeagleBoard-Load-kernel-via-MMC-ext2-not-fat.patch

@@ -1,26 +0,0 @@
-From 03757f19b4affb531d1606e468e0411acd8d57cb Mon Sep 17 00:00:00 2001
-From: Jason Kridner <jkridner@beagleboard.org>
-Date: Wed, 9 Mar 2011 18:48:19 -0600
-Subject: [PATCH 16/16] BeagleBoard: Load kernel via MMC ext2, not fat
-
----
- include/configs/omap3_beagle.h |    3 ++-
- 1 files changed, 2 insertions(+), 1 deletions(-)
-
-diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
-index de572e8..3a102e5 100644
---- a/include/configs/omap3_beagle.h
-+++ b/include/configs/omap3_beagle.h
-@@ -261,7 +261,8 @@
- 		"root=${ramroot} " \
- 		"rootfstype=${ramrootfstype}\0" \
- 	"loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
--	"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
-+	"loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
-+	"loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} /boot/uImage\0" \
- 	"mmcboot=echo Booting from mmc ...; " \
- 		"run mmcargs; " \
- 		"bootm ${loadaddr}\0" \
--- 
-1.6.6.1
-

recipes-bsp/u-boot/u-boot/2011.09/0001-omap3-mem-Comment-enable_gpmc_cs_config-more.patch

@@ -1,56 +0,0 @@
-From 81630b54970a9274140b1c14caa31da6331a62fa Mon Sep 17 00:00:00 2001
-From: Tom Rini <trini@ti.com>
-Date: Fri, 18 Nov 2011 12:47:58 +0000
-Subject: [PATCH 01/21] omap3: mem: Comment enable_gpmc_cs_config more
-
-Expand the "enable the config" comment to explain what the bit shifts
-are and define out two of the magic numbers.
-
-Signed-off-by: Tom Rini <trini@ti.com>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- arch/arm/cpu/armv7/omap3/mem.c        |   12 +++++++++---
- arch/arm/include/asm/arch-omap3/mem.h |    4 ++++
- 2 files changed, 13 insertions(+), 3 deletions(-)
-
-diff --git a/arch/arm/cpu/armv7/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c
-index a01c303..2f1efea 100644
---- a/arch/arm/cpu/armv7/omap3/mem.c
-+++ b/arch/arm/cpu/armv7/omap3/mem.c
-@@ -105,9 +105,15 @@ void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
- 	writel(gpmc_config[3], &cs->config4);
- 	writel(gpmc_config[4], &cs->config5);
- 	writel(gpmc_config[5], &cs->config6);
--	/* Enable the config */
--	writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) |
--		(1 << 6)), &cs->config7);
-+
-+	/*
-+	 * Enable the config.  size is the CS size and goes in
-+	 * bits 11:8.  We set bit 6 to enable this CS and the base
-+	 * address goes into bits 5:0.
-+	 */
-+	 writel((size << 8) | (GPMC_CS_ENABLE << 6) |
-+				 ((base >> 24) & GPMC_BASEADDR_MASK),
-+				 &cs->config7);
- 	sdelay(2000);
- }
- 
-diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h
-index db6a696..abf4e82 100644
---- a/arch/arm/include/asm/arch-omap3/mem.h
-+++ b/arch/arm/include/asm/arch-omap3/mem.h
-@@ -259,6 +259,10 @@ enum {
- #define GPMC_SIZE_32M	0xE
- #define GPMC_SIZE_16M	0xF
- 
-+#define GPMC_BASEADDR_MASK	0x3F
-+
-+#define GPMC_CS_ENABLE		0x1
-+
- #define SMNAND_GPMC_CONFIG1	0x00000800
- #define SMNAND_GPMC_CONFIG2	0x00141400
- #define SMNAND_GPMC_CONFIG3	0x00141400
--- 
-1.7.2.5
-

recipes-bsp/u-boot/u-boot/2011.09/0002-OMAP3-Update-SDRC-dram_init-to-always-call-make_cs1_.patch

@@ -1,66 +0,0 @@
-From 42db3ebdd76628017e7ab83752e9b288ec4f26a0 Mon Sep 17 00:00:00 2001
-From: Tom Rini <trini@ti.com>
-Date: Fri, 18 Nov 2011 12:47:59 +0000
-Subject: [PATCH 02/21] OMAP3: Update SDRC dram_init to always call make_cs1_contiguous()
-
-We update the comment in make_cs1_contiguous() to be a little bit
-more clear (it's been copy/pasted from other silicons) and then
-explain in dram_init() why we need to always try this.
-
-Note that in the previous behavior we were always calling this on
-boards that never had cs1 populated anyhow so making sure we do
-this always is fine and will correct things like omap3evm detecting
-an invalid amount of memory (384MB).
-
-Signed-off-by: Tom Rini <trini@ti.com>
-Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
----
- arch/arm/cpu/armv7/omap3/sdrc.c |   23 +++++++++++------------
- 1 files changed, 11 insertions(+), 12 deletions(-)
-
-diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c
-index 0dd1955..66ce33f 100644
---- a/arch/arm/cpu/armv7/omap3/sdrc.c
-+++ b/arch/arm/cpu/armv7/omap3/sdrc.c
-@@ -58,10 +58,9 @@ u32 is_mem_sdr(void)
- 
- /*
-  * make_cs1_contiguous -
-- *  - For es2 and above remap cs1 behind cs0 to allow command line
-- *    mem=xyz use all memory with out discontinuous support compiled in.
-- *    Could do it at the ATAG, but there really is two banks...
-- *  - Called as part of 2nd phase DDR init.
-+ * - When we have CS1 populated we want to have it mapped after cs0 to allow
-+ *   command line mem=xyz use all memory with out discontinuous support
-+ *   compiled in.  We could do it in the ATAG, but there really is two banks...
-  */
- void make_cs1_contiguous(void)
- {
-@@ -207,16 +206,16 @@ int dram_init(void)
- 
- 	size0 = get_sdr_cs_size(CS0);
- 	/*
--	 * If a second bank of DDR is attached to CS1 this is
--	 * where it can be started.  Early init code will init
--	 * memory on CS0.
-+	 * We always need to have cs_cfg point at where the second
-+	 * bank would be, if present.  Failure to do so can lead to
-+	 * strange situations where memory isn't detected and
-+	 * configured correctly.  CS0 will already have been setup
-+	 * at this point.
- 	 */
--	if ((sysinfo.mtype == DDR_COMBO) || (sysinfo.mtype == DDR_STACKED)) {
--		do_sdrc_init(CS1, NOT_EARLY);
--		make_cs1_contiguous();
-+	make_cs1_contiguous();
-+	do_sdrc_init(CS1, NOT_EARLY);
-+	size1 = get_sdr_cs_size(CS1);
- 
--		size1 = get_sdr_cs_size(CS1);
--	}
- 	gd->ram_size = size0 + size1;
- 
- 	return 0;
--- 
-1.7.2.5
-