vincent/PyCNC
1
0
Fork 0
mirror of https://github.com/sinseman44/PyCNC.git synced 2026-02-26 09:59:25 +00:00
Code Issues Projects Releases Wiki Activity

fix readme file for proper pypi displaying

Browse Source
This commit is contained in:
Nikolay Khabarov
2017-08-23 00:49:13 +03:00
parent 9f7052cf17
commit cf0b4d0a72
2 changed files with 38 additions and 39 deletions
Download Patch File Download Diff File Expand all files Collapse all files

75
README.md
View File

@@ -64,48 +64,47 @@ Raspberry Pi implementation should be connected to A4988, DRV8825 or any other
stepper motor drivers with DIR and STEP pin inputs.
Default config is created for Raspberry Pi 2-3 and this wiring config:
| Circuit | RPi pin | RAMPS pin | Note |
|-----------------|-------------|--------------------------|------------------|
| X step | GPIO21 | A0 | |
| X dir | GPIO20 | A1 | |
| steppers enable | GPIO26 | A2, A8, D24, D34, D38 | all steppers |
| Y step | GPIO16 | A6 | |
| Y dir | GPIO19 | A7 | |
| Z dir | GPIO13 | D48 | |
| Z step | GPIO12 | D46 | |
| E1 step | GPIO6 | D36 | reserve |
| E1 dir | GPIO5 | D34 | reserve |
| E0 dir | GPIO7 | D28 | |
| E0 step | GPIO8 | D26 | |
| Z max | GPIO11 | D19 | |
| Z min | GPIO25 | D18 | |
| Y max | GPIO9 | D15 | |
| Y min | GPIO10 | D14 | |
| X max | GPIO24 | D2 | |
| X min | GPIO23 | D3 | |
| heater bed | GPIO22 | D8 | |
| heater 2 | GPIO27 | D9 | uses for fan |
| heater 1 | GPIO18 | D10 | |
| ser 1 | GPIO17 | D11 | reserve |
| ser 2 | GPIO15 | D6 | reserve |
| ser 3 | GPIO4 | D5 | reserve |
| ser 4 | GPIO14 | D4 | reserve |
| I2C SCL | GPIO3 | - | to ads111x |
| I2C SDA | GPIO2 | - | to ads111x |
| ads1115 ch0 | - | A15 | heater 2 - nc |
| ads1115 ch1 | - | A14 | bed sensor |
| ads1115 ch2 | - | A13 | extruder sensor |
| ads1115 ch3 | - | - | not connected |
| Circuit name | RPi pin name | RAMPSv1.4 board pin name | Note |
|-----------------|--------------|--------------------------|-----------------|
| X step | GPIO21 | A0 | |
| X dir | GPIO20 | A1 | |
| steppers enable | GPIO26 | A2, A8, D24, D34, D38 | all steppers |
| Y step | GPIO16 | A6 | |
| Y dir | GPIO19 | A7 | |
| Z dir | GPIO13 | D48 | |
| Z step | GPIO12 | D46 | |
| E1 step | GPIO6 | D36 | reserve |
| E1 dir | GPIO5 | D34 | reserve |
| E0 dir | GPIO7 | D28 | |
| E0 step | GPIO8 | D26 | |
| Z max | GPIO11 | D19 | |
| Z min | GPIO25 | D18 | |
| Y max | GPIO9 | D15 | |
| Y min | GPIO10 | D14 | |
| X max | GPIO24 | D2 | |
| X min | GPIO23 | D3 | |
| heater bed | GPIO22 | D8 | |
| heater 2 | GPIO27 | D9 | uses for fan |
| heater 1 | GPIO18 | D10 | |
| ser 1 | GPIO17 | D11 | reserve |
| ser 2 | GPIO15 | D6 | reserve |
| ser 3 | GPIO4 | D5 | reserve |
| ser 4 | GPIO14 | D4 | reserve |
| I2C SCL | GPIO3 | - | to ads111x |
| I2C SDA | GPIO2 | - | to ads111x |
| ads1115 ch0 | - | A15 | heater 2 - nc |
| ads1115 ch1 | - | A14 | bed sensor |
| ads1115 ch2 | - | A13 | extruder sensor |
| ads1115 ch3 | - | - | not connected |
So having Raspberry Pi connected this way, there is no need to configure
pin map for project. [RAMPS v1.4](http://reprap.org/wiki/RAMPS_1.4) board can
be used for this purpose. Full reference circuit diagram and photos of
assembled controller(click to enlarge):
[![circuit_small](https://user-images.githubusercontent.com/8740775/28233810-40773186-6902-11e7-8496-5750babfcf44.jpg)](https://user-images.githubusercontent.com/8740775/28233650-d64060e0-6900-11e7-8605-6475384fd2f7.png)
[![sample_front_small](https://user-images.githubusercontent.com/8740775/28233812-407820c8-6902-11e7-8de1-35c03509c0e5.jpg)](https://user-images.githubusercontent.com/8740775/28233649-d6402800-6900-11e7-8dca-cd35c8292e0c.jpg)
[![sample_back_small](https://user-images.githubusercontent.com/8740775/28233879-db96ea1c-6902-11e7-9298-11150476084b.jpg)](https://user-images.githubusercontent.com/8740775/28233648-d63fa0c4-6900-11e7-8fab-2055e035a6cb.jpg)
[![sample_mounted_small](https://user-images.githubusercontent.com/8740775/28233811-40777e8e-6902-11e7-8899-5991860d182c.jpg)](https://user-images.githubusercontent.com/8740775/28233652-d65f82ea-6900-11e7-9e80-d8b0c9238f95.jpg)
assembled controller(click to enlarge):
[![circuit small](https://user-images.githubusercontent.com/8740775/28233810-40773186-6902-11e7-8496-5750babfcf44.jpg)](https://user-images.githubusercontent.com/8740775/28233650-d64060e0-6900-11e7-8605-6475384fd2f7.png)
[![sample front small](https://user-images.githubusercontent.com/8740775/28233812-407820c8-6902-11e7-8de1-35c03509c0e5.jpg)](https://user-images.githubusercontent.com/8740775/28233649-d6402800-6900-11e7-8dca-cd35c8292e0c.jpg)
[![sample back small](https://user-images.githubusercontent.com/8740775/28233879-db96ea1c-6902-11e7-9298-11150476084b.jpg)](https://user-images.githubusercontent.com/8740775/28233648-d63fa0c4-6900-11e7-8fab-2055e035a6cb.jpg)
[![sample mounted small](https://user-images.githubusercontent.com/8740775/28233811-40777e8e-6902-11e7-8899-5991860d182c.jpg)](https://user-images.githubusercontent.com/8740775/28233652-d65f82ea-6900-11e7-9e80-d8b0c9238f95.jpg)
# Usage
Just clone this repo and run `./pycnc` from repo root. It will start in

2
setup.py
View File

@@ -9,7 +9,7 @@ except(IOError, ImportError):
from setuptools import setup, find_packages
setup(
name="pycnc",
version="1.0.0",
version="1.1.0",
packages=find_packages(),
scripts=['pycnc'],