rdv1 has been EOLed, and requires keeping around some recipes because
of its removal. Also, the FVP is x86 only, thus limiting CI.
Signed-off-by: Jon Mason <jon.mason@arm.com>
sgi575 has been EOLed, and requires keeping around some recipes because
of its removal. Also, the FVP is x86 only, thus limiting CI.
Signed-off-by: Jon Mason <jon.mason@arm.com>
Align the Corstone1000 Ethos-U85 device tree to match the upstream
bindings used by the in-tree Ethos-U DRM accel driver.
- Rework the Corstone1000 U-Boot patch to replace the legacy arm,ethosu-direct
node with an upstream-style Ethos-U85 node (arm,ethos-u85), add the
required clocks/clock-names, and switch the SRAM description to
mmio-sram.
- Drop meta-ethos specific properties (reserved-memory/dma-ranges,
/region-cfgs/mem-config) from the U-Boot DT.
- Enable required kernel options for the in-tree driver and SRAM provider:
- CONFIG_SRAM
- CONFIG_DRM
- CONFIG_DRM_ACCEL
- CONFIG_DRM_ACCEL_ARM_ETHOSU
Signed-off-by: Michael Safwat <michael.safwat@arm.com>
Signed-off-by: Frazer Carsley <frazer.carsley@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
linux-yocto does not currently ship a 6.19 recipe, so add a
meta-arm-bsp linux-yocto_6.19.bb that tracks linux-yocto-dev v6.19/base.
Pin SRCREV_machine to fixed revision to keep builds reproducible.
Update Corstone-1000 to prefer linux-yocto 6.19 and align
the user guide pointers accordingly.
Signed-off-by: Michael Safwat <michael.safwat@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Trusted Services has introduced a Firmware TPM (fTPM) secure partition.
This change enables building and deploying the fTPM SP through meta-arm.
The secure partition is based on the TPM2 reference implementation,
msp-tpm20-ref, which has been patched to use MbedTLS as its
crypto backend and psa-its for non-volatile storage.
Signed-off-by: Gabor Toth <gabor.toth2@arm.com>
Signed-off-by: Gyorgy Szing <gyorgy.szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
* Set Linux kernel preferred version for Corstone-1000 to 6.18
* Update Corstone-1000 user guide.
* Recent kernel versions removed the deprecated CONFIG_LIBCRC32C
Kconfig symbol as part of the CRC library cleanup.
Replace CONFIG_LIBCRC32C with CONFIG_CRC32, which provides the
generic CRC32/CRC32C library support used by in-kernel consumers.
* The ext3 driver was removed historically and ext4 carries
compatibility for ext3 on-disk format.
* Amend External System patch to adhere to Kernel v6.18 RemoteProc
API.
* Add #address-cells and #size-cells parameters to ethosu dts node
No functional change intended.
Signed-off-by: Hugues KAMBA MPIANA <hugues.kambampiana@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The linux-yocto kernel has strict configuration warnings enabled and this
often causes warning, for example with 6.18.3:
[INFO]: the following symbols were not found in the active configuration:
- CONFIG_SND_SOC_ROCKCHIP
- CONFIG_SLIM_QCOM_CTRL
For these machines we're using the upstream defconfig and not a config
file that we're maintaining, so fixing these problems upstream is slower
than one would like.
As we don't maintain the config, we can disable the checker for these
two machines. This is _not_ precedence for disabling the audit for any
machines where we're not simply using the upstream defconfig without any
changes.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Enable the Corstone‑1000 Cortex‑A320 variant by:
- Introduce `machine/include/corstone1000-a320.inc` to configure the
default Ethos‑U MAC count when `cortexa320` is in MACHINE_FEATURES,
and allow override via `ETHOSU_NUM_MACS`.
- Add a KAS profile at `kas/corstone1000-a320.yml` for Cortex‑A320
FVP-based builds.
- Extend corstone1000.inc to detect MACHINE_FEATURES (cortexa320) and
pull in the matching tune-<core>.inc (default still Cortex-A35).
- Add the `meta-ethos` layer as a dependency of `meta-arm-bsp` for
Cortex‑A320 builds and define a new KMachine override to pull in
the Ethos‑U driver recipe.
- In `conf/machine/corstone1000-fvp.conf`, inspect `MACHINE_FEATURES`
and set `FVP_EXE` to `FVP_Corstone-1000_with_Cortex-A320` when
`cortexa320` is enabled, otherwise fall back to `FVP_Corstone-1000`.
- In `recipes-devtools/fvp/fvp-corstone1000.bb`, add a
`SRC_URI:cortexa320` entry (with checksums) for the Cortex‑A320 FVP
build archive.
- Disable the rootfs CPIO file compression so it is not compressed
twice when bundled with the kernel
Signed-off-by: Michael Safwat <michael.safwat@arm.com>
Signed-off-by: Frazer Carsley <frazer.carsley@arm.com>
Signed-off-by: Hugues KAMBA MPIANA <hugues.kambampiana@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Kernel builds are logging the following issue:
WARNING: linux-yocto-6.16.8+git-r0 do_kernel_configcheck: [kernel config]: specified values did not make it into the kernel's final configuration:
[NOTE]: 'CONFIG_BT_LEDS' last val (y) and .config val (n) do not match
This could be enabled by setting:
CONFIG_LEDS_CLASS=y
CONFIG_NEW_LEDS=y
CONFIG_SND_SOC_HDA=y
But this isn't really useful on the juno platform. So, better to
disable the BT LEDs.
Signed-off-by: Jon Mason <jon.mason@arm.com>
* Set Linux kernel preferred version for Corstone-1000 to 6.12.
* Update version listed in Corstone-1000 user guide documentation.
* Remove Linux kernel version 6.10 recipe as was only used by Corstone-1000.
Signed-off-by: Ali Can Ozaslan <ali.oezaslan@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
oe-core has removed 6.10, so until corstone1000 has upgraded to 6.12 add
it temporarily to meta-arm-bsp.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The DesignWare platform driver is hidden behind a DesignWare Core option
now, so enable that too.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Set the Upstream-Status to Denied because the community suggests a different design
The external system implementation in Corstone-1000 is user-defined.
In the implementation provided by he FPGA board and by the FVP, the
Cortex-A35 (Linux) can not access the memory of the external system (Cortex-M3).
So, Linux can not load the external system firmware and can not communicate
with the external system using Rpmsg over remoteproc subsystem. The reason is Rpmsg
needs vrings memory buffers to be shared between both cores.
The community prefers that the HW is updated with memory sharing before they
consider merging the remoteproc driver.
We reached the agreement that we will split the work in two parts:
Part 1: Writing an SSE-710 reset controller driver
Part 2: Corstone-1000 remoteproc driver
Part 1 is doable and we will be working on it.
Part 2 is waiting for the FPGA upgrade with the memory sharing feature.
For more details [1].
[1]: https://lore.kernel.org/all/20241009094635.GA14639@e130802.arm.com/
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The tc files were removed some time ago, but there are still entries
in the bbappends trying to reference those files. Remove them.
Fixes: 0af53c6453 ("arm-bsp: Remove tc1")
Signed-off-by: Jon Mason <jon.mason@arm.com>
oe-core master now has 6.10.11 which incorporates this patch, so we don't
need to carry it anymore.
This reverts commit 60fd47edd0.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Create new yml file "corstone1000-extsys.yml" which adds "corstone1000-extsys" as
new MACHINE_FEATURE.
Based on this, external system components can be enabled or disabled from the
Linux Kernel and U-Boot.
Reason for change:
DT-schema test is failing for the SystemReady-IR v2.0 certification because
device tree binding for remoteproc dts node corresponds to external system has
not been upstreamed in the Linux Kernel yet.
So, it has been decided to make enablement of external system configurable in
order to make Corstone1000 FVP SystemReady-IR v2.0 certifiable.
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
CONFIG_FB_ARMCLCD is long obsolete, has been replaced with a DRM driver
enabled by CONFIG_DRM_PL111, and was removed in 6.8.
CONFIG_THERMAL_WRITABLE_TRIPS was removed in 6.9.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The fvp-timer.cfg enables two modules for the SP804 and SP810 devices.
These are older pieces of hardware that predate the architectural timer
in modern systems, so even if the drivers are built they will not be used
by the kernel.
Whilst this is a good reason to remove them, another reason is that the
SP804 driver is incorrectly defined in the Kconfig so it can only be
built if a machine selects it explicitly (for arm64, only ARCH_BCM2835
and ARCH_HISI do this) or if COMPILE_TEST is enabled.
This led to COMPILE_TEST being enabled so that this driver can be built.
However, COMPILE_TEST does more, notably it turns on COMPILE_WERROR which
then makes any compile warnings fatal. This is inconvenient, especially
when compiler upgrades happen.
Remove the timer configuration entirely: the architectural timer is used
so this is entirely redundant.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
add support for the remoteproc control feature for the external system
With this feature we can switch on/off the external system on demand:
echo stop > /sys/class/remoteproc/remoteproc0/state
echo start > /sys/class/remoteproc/remoteproc0/state
During Linux boot the remoteproc subsystem automatically start
the external system. The user can use the commands above to
stop then start the remote core.
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
This is mostly based on the existing qemu-generic-arm64 machine, but by
not being based on the genericarm64 and instead being specifically a
machine to run on the qemu sbsa-ref machine we get to tune differently.
Specifically, this configures sbsa-ref to be a Neoverse N2 (v9), and the
tune is set to match. Another notable difference to qemu-generic-arm64
is that the kernel configuration is at present defconfig. We may wish
to change this in the future to be the same fragmented configuration as
genericarm64.
We have to ignore two testimage parselogs failures: one from NUMA which
will be fixed in a future EDK2 release, and one from efifb where we
should be using the bochsdrm driver instead (further investigation is
needed)
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Every platform should have the chance to try the -rt patches.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Add configuration settings to TF-A, OP-TEE and TS SPs needed to get TS
built and run on the fvp-base machine.
Signed-off-by: Gyorgy Szing <gyorgy.szing@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
A SRCREV for arm-platforms-kmeta was added years ago to get
yocto-check-layer working at the time, but was never removed (and never
updated). Removing now, since it is not necessary.
Signed-off-by: Jon Mason <jon.mason@arm.com>
By building the Corstone-1000 firmware under the firmware multiconfig we
can also build a minimal standard core image to be mounted in the fvp as
a mass storage device.
To do this we had to enable the MMC card interface in the Corstone-1000
kernel configuration.
Signed-off-by: Drew Reed <Drew.Reed@arm.com>
Bumped kernel version to v6.6 and rebased N1SDP kernel PCIe quirk patches on top of this new version.
Signed-off-by: Anusmita Dutta Mazumder <anusmita.duttamazumder@arm.com>
Since there are no platforms using this version, the related files can
be removed.
Signed-off-by: Anusmita Dutta Mazumder <anusmita.duttamazumder@arm.com>
Linux 6.1 will be removed from oe-core master shortly, so whilst we
still have BSPs that use it (specifically, n1sdp) carry a 6.1 recipe in
meta-arm-bsp.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Since there are no platforms using this version, this reciepe can
be removed.
Signed-off-by: Vikas Katariya <vikas.katariya@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Since linux yocto kernel 6.5 is EOL and other layers like
meta-virtualization dropping support for it, it would be
sensible to downgrade the kernel to 6.1 which is a LTS.
This is a temporary change and later we would move to 6.6 when its
officially supported on N1SDP.
This revert the following commits:
* 1fe76c893c
* 21df60b921
Signed-off-by: Jon Mason <jon.mason@arm.com>
oe-core master has upgraded from 6.5 to 6.6, but as we have BSPs that
still use 6.5 (corstone1000, n1sdp) we need to carry the recipe. This
should be a short-term measure as 6.5 was EOL in December 2023.
Also, drop the unused 6.4 linux-yocto which was no longer needed since
N1SDP moved to 6.5 with 21df60b.
Signed-off-by: Ross Burton <ross.burton@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
When booting, the tee driver from kernel side
invokes a yielding call to OP-TEE, which gets
stuck because OP-TEE never sends Done response:
OPTEE_FFA_YIELDING_CALL_RETURN_DONE
This issue was previously resolved by introducing
an inappropriate patch to the kernel with 1 ms delay
in ffa_msg_send_direct_req.
Further investigation proved that OP-TEE doesn't
get enough processing time and is constantly interrupted
by the kernel requests. To remove this patch, TF-A logging
level is lowered to default (40 in debug builds and
20 in release builds), which eliminates the time consumed
previously by TF-A VERBOSE logs (giving OP-TEE more
processing time).
Signed-off-by: Mariam Elshakfy <mariam.elshakfy@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bump kernel version to v6.5 and rebased N1SDP kernel PCIe quirk patches top of this new version.
Signed-off-by: Xueliang Zhong <xueliang.zhong@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
the configuration options corresponding to external system are removed
from the kernel and the defconfig is generated with with savedefconfig
bitbake task
Signed-off-by: Harsimran Singh Tungal <harsimransingh.tungal@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
The v6.4 kernel is needed for some platforms in meta-arm-bsp.
Temporarily add it here to give those machines enough time to
update to the latest version. Also, add the patch to the
defconfig.
Signed-off-by: Jon Mason <jon.mason@arm.com>
The fvp-baser-aemv8r64 machine will not be actively maintained.
Signed-off-by: Divin Raj <divin.raj@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bump kernel version to v6.4 and rebase the patches on
top of this new version.
Signed-off-by: Xueliang Zhong <xueliang.zhong@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Bump kernel version to v6.4 and rebased N1SDP kernel PCIe quirk patches
top of this new version.
Signed-off-by: Xueliang Zhong <xueliang.zhong@arm.com>
Signed-off-by: Jon Mason <jon.mason@arm.com>
Jon Mason
Michael Safwat
Gabor Toth
Hugues KAMBA MPIANA
Ross Burton
Ali Can Ozaslan
Abdellatif El Khlifi
Harsimran Singh Tungal
Gyorgy Szing
Drew Reed
Anusmita Dutta Mazumder
Vikas Katariya
Mariam Elshakfy
Xueliang Zhong
Divin Raj